02 Sip 5

SIPROTEC 5
New solutions for energy automation systems
Unrestricted © Siemens 2020 siemens.com/energy-automation

Foundation for Our Innovations
And across several generations.
Unrestricted © Siemens 2020

Page 3 Jul 2020 Zoran Ristanović / SI DG
Perfectly tailored fit
Flexible Configuration of the Device Hardware
With the SIPROTEC 5 modular system you get

exactly the device that you need.

Perfectly tailored fit
Flexible Configuration of the Device Hardware
The simple SIPROTEC 5 equation:
Base module with basic functionality
+ Optional expansion modules
+ Operation panels for base and expansion

modules
+ Optional plug-in modules
= Your individual SIPROTEC 5 device
Supplied completely assembled by Siemens!

Hardware Overview
Basic Modules and Expansion Module
• Basic modules with

1/3-width of a 19“ rack
§ Expansion modules with
1/6-width of a 19“ rack
up to 4 modules (19”)

Hardware Overview
Basic Modules and Expansion Module
• From 2014 on, also a
second row of expansion
modules is possible:
= max. 9 expansion
modules
new

Hardware Overview
Various Operation Panels

Hardware Overview
Optimized Current Terminals for Protection
and Measurement

Hardware Overview
Many Plug-in Modules for all SIPROTEC 5 Devices

Basic module:
Interfaces

I/O Modules: Components

Binary outputs

Binary outputs

Binary inputs

Voltage terminals
Connections

3 types of current transformer terminals

Current terminals
Connection of ring-type lugs

Current terminals
Connections

Current Transformer Inputs





Voltage Transformer Inputs






I/O Modules:
Power Supply - Communication Board
PS 201
CB 202
Life Contact

I/O Modules: 4CT - 8 CT

I/O Modules: 8 VTs

I/O Modules: BI / BO only

I/O Modules: BI / BO (HS)

I/O Modules: Motor Control

I/O Modules: Motor Control

I/O Modules: Non expandable Devices 7xx82

Plug In Module
Measuring transducer interface

You want to be prepared against arc flashes?
Then you should be interested in

SIPROTEC 5 Arc Protection!

Page 40 Jul 2020 August 2016 Energy
Zoran
Automation
RistanovićProducts
/ SI DG
Arc protection –
Example: MV switchgear (NXAIR)
Front and side view
Optical point sensors with wires
Busbar compartment
Breaker compartment
Cable connection compartment

Page 41 Jul 2020 August 2016 Energy Automation
Zoran RistanovićProducts
/ SI DG
Application I – Light and Current
Busbar compartment
Breaker compartment
Cable connection
compartment
Feeder 1 Feeder 2 Incoming

Page 42 Jul 2020 August 2016 Zoran
Energy RistanovićProducts
Automation / SI DG
Application II – Light and Current (with communication)
Binary signal / Goose
Busbar compartment
Breaker compartment
Cable connection
compartment
Feeder 1 Feeder 2 Incoming

Page 43 Jul 2020 August 2016 Zoran
Energy RistanovićProducts
Automation / SI DG
SIPROTEC 5 portfolio
7SA82
Fault recorder
7SA84 7SJ82
7SJ85
7SA86 Distance protection Overcurrent protection 7SJ86
7SA87
7SD82
7SD84 Line Motor 7SK82
7SD86
7SD87
differential protection
7SK85
7SL82
Combined distance Bay 6MD85
7SL86
7SL87
controller 6MD86
& line differential
Breaker-
7UT82
7VK87
Management 7UT85
7UT86 Busbar protection
7UT87
Transformer differential protection &
Page 44 Jul 2020 voltage regulator Zoran Ristanović / SI DG
SIPROTEC 5
Overcurrent protection
OC protection
7SJ85
(modular IO)
OC protection 7SJ82
(non-modular IO)
OC protection,
as line protection backup 7SJ86
(modular IO)

SIPROTEC 5
Distance protection
Distance protection for 3-pole

tripping 7SA82
(modular IO)
Distance protection for 3-pole

tripping 7SA86
(non-modular IO)
Distance protection for 1-/3-pole

trip 7SA86
(modular IO)

SIPROTEC 5
Line Protection devices
• Exclusively 3-pole tripping
7 XX 82
7 XX YY • I/O quantity not expandable
• Exclusively 3-pole tripping
7 XX 86
• I/Os completely flexible
Main function Classification • 1- and 3-pole tripping
7 XX 87
• I/Os completely flexible
7SA82 7SD82 7SA86 7SD86 7SL86 7SJ86 7SA87 7SD87 7SL87 7VK87
3-pole tripping ■ ■ ■ ■ ■ ■
1-/3-pole tripping ■ ■ ■ ■
Flexible and configurable HW ■ ■ ■ ■ ■ ■ ■ ■
Distance Protection ■ ■ ■
Line Differential Protection ■ ■ ■
O/C protection for O/H lines ■ ■ ■ ■ ■ ■ ■ ■ ■
Line Differential and Distance Prot. ■ ■
Circuit-breaker Management ■

SIPROTEC 5
Transformer diferential protection – 7UT82
• Two winding differential protection

• 1 differential protection for standard and auto transformers
• 2 restricted earth fault protections
Applications
• Number of measuring points (MP)

• only 2 three phase current MPs
• only 2 single phase current MPs
• 1/3 Device with IO103
• 8 I, 7 BI, 7 BO (not expandable)

not expandable
Suitable device 7UT82

• Differential protection with restraint characteristic • Temperature monitoring
Device functions
and fast trip stage • Modular software

• Flexible vector group adaptation • IEC 61850 (Edition 1 and 2)
• Inrush and over excitation detection • Multiple communication
• CT saturation detection • SIPROTEC 5 standard functions for protection, control
• Restricted earth fault protection and monitoring

SIPROTEC 5
Transformer differential protection devices
Two winding transformers

7UT85
(3 sides, 5 measuring points)
Three winding transformers

7UT86
Multiple winding transformers

7UT87

Page 49 Jul 2020 December 2015 Zoran Ristanović / SI DG
Automation Products
SIPROTEC 5
Generator protection devices 7UM85 – Flexible hardware
configuration
Small units
Basic hardware
7UM85
(4 I and 4 V)
Small and medium sized units

Standard hardware
7UM85
(e.g. 8I and 8 V)
Larger units
Large hardware
7UM85
(e.g. 16 I and 8V)

Busbar protection
7SS85 – Profile
Application range
• Single busbar
• Double busbar / single breaker
• Triple busbar
• Double busbar with combined bus
• Double busbar with transfer bus
• 1 ½ circuit-breaker arrangement
• Double busbar / double breaker (1 or 2 CT)
• H- and T-circuits arrangements
• Ring bus, meshed corner

Busbar protection
7SS85 – Profile 1
Protection functions
• 87B Phase-selective differential protection
• 50BF Breaker fail protection 1/3pole or 3pole
• 50EF End fault protection for feeders and couplers
• 62BF Breaker fail protection with no current
monitoring
• 50/87B Sensitive operate curve
• 50/74 Current transformer supervision
• 74TC Trip circuit supervision
• 50BFinh. Inherent breaker fail protection 3pole for
busbar faults
• 27/59 Under- / Overvoltage protection
• 81>< Frequency protection
• 50/51(N) Overcurrent protection 3 phase (ground) per bay

Busbar protection
7SS85 – Profile 2
Protection functions
• Cross stabilization
• Bus coupler differential protection
• 21T Impedance protection
• 67/67N Directional overcurrent protection
phase/ground

Busbar protection
7SS85 – Profile
System features
• 20 current measuring points (3-ph CT sets)
• 26 bays (feeder, coupler, sectionalizer)
• 6 (4 until V7.5x) bus zones
• 4 coupler
• 4 voltage measuring points (3-ph VT sets)
• Very short tripping time (<10ms)
• Integrated check zone as additional trip criterion
• High stability for external faults
(CT saturation-free time 2ms)
• Graphical engineering, configuration, and operation
with DIGSI5
• Comprehensive supervision and control functions
• Online substation monitoring (Single-line based) via display
or DIGSI5
• One 3-phase device for processing and HMI
Distributed Busbar Protection (max. 20 bays)
7SS85 + Merging Units: Basics
• 7SS85 SF9, A-E SIPROTEC 7SS85 SF 9, A-E

Central Unit for distributed busbar protection (up to 20 bays)
(same as centralized busbar protection) Time synchronization
IEEE 1588v2
/ PTP GMC
• Time synchronization via IEEE1588v2/ PTP PRP LAN A
• Distributed process data acquisition: PRP LAN B

(optional for PRP)
• Merging Unit 6MU85
• Every modular SIPROTEC 5 device
• Third party Merging Unit 6MU85 6MU85 7SJ85 7SA86 3rd party MU
• Interoperable IEC 61850 busbar protection solution
• Open engineering through standard IEC 61850

configuration tools and DIGSI 5

7SS85 + Merging Units: 7SS85 Selection
• Existing central 7SS85 variants as Central Unit

SIPROTEC 7SS85 SF 9, A-E
(up to 20 bays)
• New hardware variant V4 as preferred variant for Time synchronization
application as CU: IO207 in base module, 1 BD-Module IEEE 1588v2
/ PTP GMC
• Up to 14 current measuring points per BD-Module possible PRP LAN A
PRP LAN B
(optional for PRP)
• Selection according disconnector image, number bus
zones, functions points as before
(FPs for bays necessary)
6MU85 6MU85 7SJ85 7SA86 3rd party MU
• Process bus client functionality needs no additional
function points.
• PRP is optional (but recommended)
• Don’t forget to calculate and order the switch(es)

7SS85 + Merging Units: MU Selection
• If a dedicated MU is requested, the 6MU85 is SIPROTEC 7SS85 SF 9, A-E

applied. (up to 20 bays)
Time synchronization
IEEE 1588v2
/ PTP GMC
• 6MU85 Standard Variant AJ1 (IO201 base module): PRP LAN A
1/3, 11BI, 9BO, 4CT, 1 BD-module, 1 Dataset
~ 7SS525 PRP LAN B
(optional for PRP)
• 6MU85 Standard Variant AJ1 6MU85 6MU85 7SJ85 7SA86 3rd party MU
+ IO205 + small Display:

1/2, 23BI, 25BO, 4CT, 1 BD-module, 1 Dataset
~ 7SS523

SIPROTEC 5
Bay Controller devices
Bay Controller for Distribution

and Transmission systems 6MD85
Bay Controller for

Transmission systems 6MD86

SIPROTEC 5
Bay Controller devices
Functionality 6MD85 6MD86

Breaker Failure Protection - Optional
Autoreclosure - Optional
FB Switching sequences Optional þ
CFC Arithmetic Optional þ
CFC Measurement Processing Optional þ
Number of Switching Devices >4 Optional þ
Synchrocheck Optional þ
A lot more functions are available – table shows only the features which are different
between 6MD85 and 6MD86

Page 59 Jul 2020 November 2015 Zoran RistanovićProduct
Automation / SI DG
Savings of SIPROTEC 5
solution in comparison to
traditional solution – some
examples

Medium Voltage
Protection and control of multiple feeders, one device
Traditional SIPROTEC 5
Benefits
• Reduced
investment (50%)
à Just 1 device for
multiple feeders
• Up to 9 feeders in
just one device!!
• Simple
parameterization à
Parameters will be
loaded just one
time!!
• Redundancy
affordable
Up to 50% savings
Total Cost with redundancy

Medium Voltage
Central control of multiple feeders, dedicated protection
Benefits
• High availability
because backup
protection functions
can be activated in
the controllers
• Simple
parameterization
• Reduced investment
having full
redundancy
Up to 40% savings

Medium Voltage
Transformer Protection
Benefits
à all necessary
functions integrated
within 1 protection
relay
• Simple
parameterization
• Faster commissioning
More than 50% savings

• Possibility to afford
REDUNDANCY with
just 2 devices !

Medium Voltage
Motor Protection
Benefits
(just 1 protection
relay or two in case
of full redundancy).
More than 25%
savings!
• Simple
parameterization
• Faster
More than 25% savings commissioning

Kontakt
Sunčica Cvetković Zoran Ristanović

Smart Infrastructure Smart Infrastructure
Digital Grid Digital Grid
Omladinskih brigada 90V Omladinskih brigada 90V
Beograd Beograd
Srbija Srbija
Mobile: +381 60 81 70 062 Mobile: +381 60 81 70 260
E-mail: E-mail:
suncica.cvetkovic@siemens.com zoran.ristanovic@siemens.com
siemens.com


02 Sip 5

Uploaded by

Copyright:

Available Formats

02 Sip 5

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

02 Sip 5

Uploaded by

Copyright:

Available Formats

SIPROTEC 5

New solutions for energy automation systems

Unrestricted © Siemens 2020 siemens.com/energy-automation

And across several generations.

Unrestricted © Siemens 2020

With the SIPROTEC 5 modular system you get

Unrestricted © Siemens 2020

The simple SIPROTEC 5 equation:

Base module with basic functionality

+ Optional expansion modules

+ Operation panels for base and expansion

= Your individual SIPROTEC 5 device

Supplied completely assembled by Siemens!

Unrestricted © Siemens 2020

• Basic modules with

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Unrestricted © Siemens 2020

Then you should be interested in

Unrestricted © Siemens 2020

Front and side view

Optical point sensors with wires

Cable connection compartment

Unrestricted © Siemens 2020

Feeder 1 Feeder 2 Incoming

Unrestricted © Siemens 2020

Binary signal / Goose

Feeder 1 Feeder 2 Incoming