LM386

LM386 Low Voltage Audio Power Amplifier

Literature Number: SNAS545A

 LM386 Low Voltage Audio Power Amplifier
August 2000

LM386
Low Voltage Audio Power Amplifier
General Description Features
The LM386 is a power amplifier designed for use in low volt- n Battery operation
age consumer applications. The gain is internally set to 20 to n Minimum external parts
keep external part count low, but the addition of an external n Wide supply voltage range: 4V–12V or 5V–18V
resistor and capacitor between pins 1 and 8 will increase the n Low quiescent current drain: 4mA
gain to any value from 20 to 200. n Voltage gains from 20 to 200
The inputs are ground referenced while the output automati- n Ground referenced input
cally biases to one-half the supply voltage. The quiescent n Self-centering output quiescent voltage
power drain is only 24 milliwatts when operating from a 6 volt
n Low distortion: 0.2% (AV = 20, VS = 6V, RL = 8Ω, PO =
supply, making the LM386 ideal for battery operation.
125mW, f = 1kHz)
n Available in 8 pin MSOP package

Applications
n AM-FM radio amplifiers
n Portable tape player amplifiers
n Intercoms
n TV sound systems
n Line drivers
n Ultrasonic drivers
n Small servo drivers
n Power converters

Equivalent Schematic and Connection Diagrams

Small Outline,
Molded Mini Small Outline,
and Dual-In-Line Packages

DS006976-2

Top View
Order Number LM386M-1,
DS006976-1 LM386MM-1, LM386N-1,
LM386N-3 or LM386N-4
See NS Package Number
M08A, MUA08A or N08E

© 2000 National Semiconductor Corporation DS006976 www.national.com

LM386
Absolute Maximum Ratings (Note 2) Dual-In-Line Package
If Military/Aerospace specified devices are required, Soldering (10 sec) +260˚C
please contact the National Semiconductor Sales Office/ Small Outline Package
Distributors for availability and specifications. (SOIC and MSOP)
Supply Voltage Vapor Phase (60 sec) +215˚C
(LM386N-1, -3, LM386M-1) 15V Infrared (15 sec) +220˚C
Supply Voltage (LM386N-4) 22V See AN-450 “Surface Mounting Methods and Their Effect
on Product Reliability” for other methods of soldering
Package Dissipation (Note 3) surface mount devices.
(LM386N) 1.25W Thermal Resistance
(LM386M) 0.73W θJC (DIP) 37˚C/W
(LM386MM-1) 0.595W θJA (DIP) 107˚C/W
Input Voltage ± 0.4V θJC (SO Package) 35˚C/W
Storage Temperature −65˚C to +150˚C θJA (SO Package) 172˚C/W
Operating Temperature 0˚C to +70˚C θJA (MSOP) 210˚C/W
Junction Temperature +150˚C θJC (MSOP) 56˚C/W
Soldering Information

Electrical Characteristics (Notes 1, 2)

TA = 25˚C
Parameter Conditions Min Typ Max Units
Operating Supply Voltage (VS)
LM386N-1, -3, LM386M-1, LM386MM-1 4 12 V
LM386N-4 5 18 V
Quiescent Current (IQ) VS = 6V, VIN = 0 4 8 mA
Output Power (POUT)
LM386N-1, LM386M-1, LM386MM-1 VS = 6V, RL = 8Ω, THD = 10% 250 325 mW
LM386N-3 VS = 9V, RL = 8Ω, THD = 10% 500 700 mW
LM386N-4 VS = 16V, RL = 32Ω, THD = 10% 700 1000 mW
Voltage Gain (AV) VS = 6V, f = 1 kHz 26 dB
10 µF from Pin 1 to 8 46 dB
Bandwidth (BW) VS = 6V, Pins 1 and 8 Open 300 kHz
Total Harmonic Distortion (THD) VS = 6V, RL = 8Ω, POUT = 125 mW 0.2 %
f = 1 kHz, Pins 1 and 8 Open
Power Supply Rejection Ratio (PSRR) VS = 6V, f = 1 kHz, CBYPASS = 10 µF 50 dB
Pins 1 and 8 Open, Referred to Output
Input Resistance (RIN) 50 kΩ
Input Bias Current (IBIAS) VS = 6V, Pins 2 and 3 Open 250 nA
Note 1: All voltages are measured with respect to the ground pin, unless otherwise specified.
Note 2: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is func-
tional, but do not guarantee specific performance limits. Electrical Characteristics state DC and AC electrical specifications under particular test conditions which guar-
antee specific performance limits. This assumes that the device is within the Operating Ratings. Specifications are not guaranteed for parameters where no limit is
given, however, the typical value is a good indication of device performance.
Note 3: For operation in ambient temperatures above 25˚C, the device must be derated based on a 150˚C maximum junction temperature and 1) a thermal resis-
tance of 107˚C/W junction to ambient for the dual-in-line package and 2) a thermal resistance of 170˚C/W for the small outline package.

www.national.com 2
 LM386
Application Hints
GAIN CONTROL INPUT BIASING
To make the LM386 a more versatile amplifier, two pins (1 The schematic shows that both inputs are biased to ground
and 8) are provided for gain control. With pins 1 and 8 open with a 50 kΩ resistor. The base current of the input transis-
the 1.35 kΩ resistor sets the gain at 20 (26 dB). If a capacitor tors is about 250 nA, so the inputs are at about 12.5 mV
is put from pin 1 to 8, bypassing the 1.35 kΩ resistor, the when left open. If the dc source resistance driving the LM386
gain will go up to 200 (46 dB). If a resistor is placed in series is higher than 250 kΩ it will contribute very little additional
with the capacitor, the gain can be set to any value from 20 offset (about 2.5 mV at the input, 50 mV at the output). If the
to 200. Gain control can also be done by capacitively cou- dc source resistance is less than 10 kΩ, then shorting the
pling a resistor (or FET) from pin 1 to ground. unused input to ground will keep the offset low (about 2.5 mV
Additional external components can be placed in parallel at the input, 50 mV at the output). For dc source resistances
with the internal feedback resistors to tailor the gain and fre- between these values we can eliminate excess offset by put-
quency response for individual applications. For example, ting a resistor from the unused input to ground, equal in
we can compensate poor speaker bass response by fre- value to the dc source resistance. Of course all offset prob-
quency shaping the feedback path. This is done with a series lems are eliminated if the input is capacitively coupled.
RC from pin 1 to 5 (paralleling the internal 15 kΩ resistor). When using the LM386 with higher gains (bypassing the
For 6 dB effective bass boost: R . 15 kΩ, the lowest value 1.35 kΩ resistor between pins 1 and 8) it is necessary to by-
for good stable operation is R = 10 kΩ if pin 8 is open. If pins pass the unused input, preventing degradation of gain and
1 and 8 are bypassed then R as low as 2 kΩ can be used. possible instabilities. This is done with a 0.1 µF capacitor or
This restriction is because the amplifier is only compensated a short to ground depending on the dc source resistance on
for closed-loop gains greater than 9. the driven input.

3 www.national.com
LM386
Typical Performance Characteristics
Quiescent Supply Current Power Supply Rejection Ratio Peak-to-Peak Output Voltage
vs Supply Voltage (Referred to the Output) Swing vs Supply Voltage
vs Frequency

DS006976-5
DS006976-13
DS006976-12

Voltage Gain vs Frequency Distortion vs Frequency Distortion vs Output Power

DS006976-14 DS006976-15 DS006976-16

Device Dissipation vs Output Device Dissipation vs Output Device Dissipation vs Output

Power — 4Ω Load Power — 8Ω Load Power — 16Ω Load

DS006976-17 DS006976-18 DS006976-19

www.national.com 4
 LM386
Typical Applications
Amplifier with Gain = 20 Amplifier with Gain = 200
Minimum Parts

DS006976-4
DS006976-3

Amplifier with Gain = 50 Low Distortion Power Wienbridge Oscillator

DS006976-6

DS006976-7

Amplifier with Bass Boost Square Wave Oscillator

DS006976-8

DS006976-9

5 www.national.com
LM386
Typical Applications (Continued)

Frequency Response with Bass Boost

DS006976-10

AM Radio Power Amplifier

DS006976-11

Note 4: Twist Supply lead and supply ground very tightly.

Note 5: Twist speaker lead and ground very tightly.
Note 6: Ferrite bead in Ferroxcube K5-001-001/3B with 3 turns of wire.
Note 7: R1C1 band limits input signals.
Note 8: All components must be spaced very closely to IC.

www.national.com 6
 LM386
Physical Dimensions inches (millimeters) unless otherwise noted

SO Package (M)
Order Number LM386M-1
NS Package Number M08A

7 www.national.com
LM386
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

8-Lead (0.118” Wide) Molded Mini Small Outline Package

Order Number LM386MM-1
NS Package Number MUA08A

www.national.com 8
 LM386 Low Voltage Audio Power Amplifier
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

Dual-In-Line Package (N)

Order Number LM386N-1, LM386N-3 or LM386N-4
NS Package Number N08E

LIFE SUPPORT POLICY

NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant support device or system whose failure to perform
into the body, or (b) support or sustain life, and can be reasonably expected to cause the failure of
whose failure to perform when properly used in the life support device or system, or to affect its
accordance with instructions for use provided in the safety or effectiveness.
labeling, can be reasonably expected to result in a
significant injury to the user.
National Semiconductor National Semiconductor National Semiconductor National Semiconductor
Corporation Europe Asia Pacific Customer Japan Ltd.
Americas Fax: +49 (0) 180-530 85 86 Response Group Tel: 81-3-5639-7560
Tel: 1-800-272-9959 Email: europe.support@nsc.com Tel: 65-2544466 Fax: 81-3-5639-7507
Fax: 1-800-737-7018 Deutsch Tel: +49 (0) 69 9508 6208 Fax: 65-2504466
Email: support@nsc.com English Tel: +44 (0) 870 24 0 2171 Email: ap.support@nsc.com
www.national.com Français Tel: +33 (0) 1 41 91 8790

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
 IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products Applications
Audio www.ti.com/audio Communications and Telecom www.ti.com/communications
Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers
Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps
DLP® Products www.dlp.com Energy and Lighting www.ti.com/energy
DSP dsp.ti.com Industrial www.ti.com/industrial
Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical
Interface interface.ti.com Security www.ti.com/security
Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community Home Page e2e.ti.com

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated