LM4040 Precision Micropower Shunt Voltage Reference

August 2002

LM4040
Precision Micropower Shunt Voltage Reference
General Description n Fixed reverse breakdown voltages of 2.048V,
2.500V,3.000V, 4.096V, 5.000V, 8.192V, and 10.000V
Ideal for space critical applications, the LM4040 precision
voltage reference is available in the sub-miniature SC70 and
SOT-23 surface-mount package. The LM4040s advanced
Key Specifications (LM4040-2.5)
design eliminates the need for an external stabilizing capaci- j Output voltage tolerance
tor while ensuring stability with any capacitive load, thus
(A grade, 25C) 0.1% (max)
making the LM4040 easy to use. Further reducing design
effort is the availability of several fixed reverse breakdown j Low output noise
voltages: 2.048V, 2.500V, 3.000V, 4.096V, 5.000V, 8.192V, (10 Hz to 10 kHz) 35 Vrms(typ)
and 10.000V. The minimum operating current increases from j Wide operating current range 60 A to 15 mA
60 A for the LM4040-2.5 to 100 A for the LM4040-10.0. All
j Industrial temperature range 40C to +85C
versions have a maximum operating current of 15 mA.
j Extended temperature range 40C to +125C
The LM4040 utilizes fuse and zener-zap reverse breakdown
voltage trim during wafer sort to ensure that the prime parts j Low temperature coefficient 100 ppm/C (max)
have an accuracy of better than 0.1% (A grade) at 25C.
Bandgap reference temperature drift curvature correction
and low dynamic impedance ensure stable reverse break- Applications
down voltage accuracy over a wide range of operating tem-
n Portable, Battery-Powered Equipment
peratures and currents.
n Data Acquisition Systems
Also available is the LM4041 with two reverse breakdown
n Instrumentation
voltage versions: adjustable and 1.2V. Please see the
LM4041 data sheet. n Process Control
n Energy Management
Product Testing
Features n
n Automotive
n Small packages: SOT-23, TO-92 and SC70
n Precision Audio Components
n No output capacitor required
n Tolerates capacitive loads

Connection Diagrams
SOT-23 TO-92 SC70

01132301
*This pin must be left floating or connected to
pin 2. 01132303
01132330
*This pin must be left floating or connected to pin
Top View Bottom View
1.
See NS Package Number MF03A See NS Package Number Z03A
Top View
(JEDEC Registration TO-236AB)
See NS Package Number MAA05A

2002 National Semiconductor Corporation DS011323 www.national.com

LM4040

Ordering Information
Industrial Temperature Range (40C to +85C)
Reverse
Breakdown Package
Voltage
Tolerance at
25C and M3 (SOT-23) M7 (SC70) NS
Average Package
Reverse Supplied as 1000 Supplied as 3000 Supplied as 1000 Supplied as 3000 Number
Z (TO-92)
Breakdown Units Tape and Units tape and Units Tape and Units Tape and
Voltage Reel Reel Reel Reel
Temperature
Coefficient
0.1%, 100 LM4040AIM3-2.0 LM4040AIM3X-2.0 LM4040AIZ-2.0 MF03A,
ppm/C max (A LM4040AIM3-2.5 LM4040AIM3X-2.5 LM4040AIZ-2.5 Z03A
grade) LM4040AIM3-3.0 LM4040AIM3X-3.0 LM4040AIZ-3.0
LM4040AIM3-4.1 LM4040AIM3X-4.1 LM4040AIZ-4.1
LM4040AIM3-5.0 LM4040AIM3X-5.0 LM4040AIZ-5.0
LM4040AIM3-8.2 LM4040AIM3X-8.2 LM4040AIZ-8.2
LM4040AIM3-10.0 LM4040AIM3X-10.0 LM4040AIZ-10.0
0.2%, 100 LM4040BIM3-2.0 LM4040BIM3X-2.0 LM4040BIM7-2.0 LM4040BIM7X-2.0 LM4040BIZ-2.0 MF03A,
ppm/C max (B LM4040BIM3-2.5 LM4040BIM3X-2.5 LM4040BIM7-2.5 LM4040BIM7X-2.5 LM4040BIZ-2.5 Z03A,
grade) LM4040BIM3-3.0 LM4040BIM3X-3.0 LM4040BIM7-3.0 LM4040BIM7X-3.0 LM4040BIZ-3.0 MAA05A
LM4040BIM3-4.1 LM4040BIM3X-4.1 LM4040BIM7-4.1 LM4040BIM7X-4.1 LM4040BIZ-4.1
LM4040BIM3-5.0 LM4040BIM3X-5.0 LM4040BIM7-5.0 LM4040BIM7X-5.0 LM4040BIZ-5.0
LM4040BIM3-8.2 LM4040BIM3X-8.2 LM4040BIZ-8.2
LM4040BIM3-10.0 LM4040BIM3X-10.0 LM4040BIZ-10.0
0.5%, 100 LM4040CIM3-2.0 LM4040CIM3X-2.0 LM4040CIM7-2.0 LM4040CIM7X-2.0 LM4040CIZ-2.0 MF03A,
ppm/C max (C LM4040CIM3-2.5 LM4040CIM3X-2.5 LM4040CIM7-2.5 LM4040CIM7X-2.5 LM4040CIZ-2.5 Z03A,
grade) LM4040CIM3-3.0 LM4040CIM3X-3.0 LM4040CIM7-3.0 LM4040CIM7X-3.0 LM4040CIZ-3.0 MAA05A
LM4040CIM3-4.1 LM4040CIM3X-4.1 LM4040CIM7-4.1 LM4040CIM7X-4.1 LM4040CIZ-4.1
LM4040CIM3-5.0 LM4040CIM3X-5.0 LM4040CIM7-5.0 LM4040CIM7X-5.0 LM4040CIZ-5.0
LM4040CIM3-8.2 LM4040CIM3X-8.2 LM4040CIZ-8.2
LM4040CIM3-10.0 LM4040CIM3X-10.0 LM4040CIZ-10.0
1.0%, 150 LM4040DIM3-2.0 LM4040DIM3X-2.0 LM4040DIM7-2.0 LM4040DIM7X-2.0 LM4040DIZ-2.0 MF03A,
ppm/C max (D LM4040DIM3-2.5 LM4040DIM3X-2.5 LM4040DIM7-2.5 LM4040DIM7X-2.5 LM4040DIZ-2.5 Z03A,
grade) LM4040DIM3-3.0 LM4040DIM3X-3.0 LM4040DIM7-3.0 LM4040DIM7X-3.0 LM4040DIZ-3.0 MAA05A
LM4040DIM3-4.1 LM4040DIM3X-4.1 LM4040DIM7-4.1 LM4040DIM7X-4.1 LM4040DIZ-4.1
LM4040DIM3-5.0 LM4040DIM3X-5.0 LM4040DIM7-5.0 LM4040DIM7X-5.0 LM4040DIZ-5.0
LM4040DIM3-8.2 LM4040DIM3X-8.2 LM4040DIZ-8.2
LM4040DIM3-10.0 LM4040DIM3X-10.0 LM4040DIZ-10.0
2.0%, 150 LM4040EIM3-2.0 LM4040EIM3X-2.0 LM4040EIM7-2.0 LM4040EIM7X-2.0 LM4040EIZ-2.0 MF03A,
ppm/C max (E LM4040EIM3-2.5 LM4040EIM3X-2.5 LM4040EIM7-2.5 LM4040EIM7X-2.5 LM4040EIZ-2.5 Z03A,
grade) LM4040EIM3-3.0 LM4040EIM3X-3.0 LM4040EIM7-3.0 LM4040EIM7X-3.0 LM4040EIZ-3.0 MAA05A

www.national.com 2
 LM4040
Extended Temperature Range (40 C to +125C)
Reverse Breakdown Package
Voltage Tolerance at 25 C M3 (SOT-23)
and Average Reverse Breakdown See NS Package
Voltage Temperature Coefficient Number MF03A
0.5%, 100 ppm/C max (C grade) LM4040CEM3-2.0, LM4040CEM3-2.5,
LM4040CEM3-3.0, LM4040CEM3-5.0
1.0%, 150 ppm/C max (D grade) LM4040DEM3-2.0, LM4040DEM3-2.5,
LM4040DEM3-3.0, LM4040DEM3-5.0
2.0%, 150 ppm/C max (E grade) LM4040EEM3-2.0, LM4040EEM3-2.5,
LM4040EEM3-3.0

3 www.national.com
LM4040

SOT-23 AND SC70 Package Marking Information

Only three fields of marking are possible on the SOT-23s and SC70s small surface. This table gives the meaning of the three
fields.
Part Marking Field Definition
RJA SOT-23 only First Field:
R2A SOT-23 only
RKA SOT-23 only
R4A SOT-23 only R = Reference
R5A SOT-23 only Second Field:
J = 2.048V Voltage Option
2 = 2.500V Voltage Option
R8A SOT-23 only K = 3.000V Voltage Option
R0A SOT-23 only 4 = 4.096V Voltage Option
RJB
R2B 5 = 5.000V Voltage Option
RKB
R4B 8= 8.192V Voltage Option
R5B 0 = 10.000V Voltage Option
R8B SOT-23 only
R0B SOT-23 only Third Field:
RJC
R2C AE = Initial Reverse Breakdown Voltage or Reference Voltage Tolerance
RKC
R4C A = 0.1%, B = 0.2%, C = +0.5%, D = 1.0%, E = 2.0%
R5C
R8C SOT-23 only
R0C SOT-23 only
RJD
R2D
RKD
R4D
R5D
R8D SOT-23 only
R0D SOT-23 only
RJE
R2E
RKE

www.national.com 4
 LM4040
Absolute Maximum Ratings (Note 1) Machine Model (Note 3) 200V
If Military/Aerospace specified devices are required, See AN-450 Surface Mounting Methods and Their Effect
please contact the National Semiconductor Sales Office/ on Product Reliability for other methods of soldering
Distributors for availability and specifications. surface mount devices.
Reverse Current 20 mA
Forward Current 10 mA Operating Ratings(Notes 1, 2)
Power Dissipation (TA = 25C) (Note 2)
Temperature Range (Tmin TA Tmax)
M3 Package 306 mW
Industrial Temperature Range 40C TA +85C
Z Package 550 mW
Extended Temperature Range 40C TA
M7 Package 241 mW
+125C
Storage Temperature 65C to +150C
Reverse Current
Lead Temperature
LM4040-2.0 60 A to 15 mA
M3 Package
LM4040-2.5 60 A to 15 mA
Vapor phase (60 seconds) +215C
LM4040-3.0 62 A to 15 mA
Infrared (15 seconds) +220C
LM4040-4.1 68 A to 15 mA
Z Package
LM4040-5.0 74 A to 15 mA
Soldering (10 seconds) +260C
LM4040-8.2 91 A to 15 mA
ESD Susceptibility
LM4040-10.0 100 A to 15 mA
Human Body Model (Note 3) 2 kV

LM4040-2.0
Electrical Characteristics (Industrial Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Re-
verse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively.
LM4040BIM3
LM4040AIM3
LM4040BIZ
Typical LM4040AIZ Units
Symbol Parameter Conditions LM4040BIM7
(Note 4) (Limit) (Limit)
(Limit)
(Note 5)
(Note 5)
VR Reverse Breakdown Voltage IR = 100 A 2.048 V
Reverse Breakdown Voltage IR = 100 A 2.0 4.1 mV (max)
Tolerance
15 17 mV (max)
(Note 6)
IRMIN Minimum Operating Current 45 A
60 60 A (max)
65 65 A (max)
VR/T Average Reverse Breakdown IR = 10 mA 20 ppm/C
Voltage Temperature 15 100 100
IR = 1 mA ppm/C (max)
Coefficient
(Note 6) IR = 100 A 15 ppm/C
VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA 0.3 mV
Change with Operating
Current Change (Note *NO 0.8 0.8 mV (max)
TARGET FOR FNXref
1.0 1.0 mV (max)
NS4914*)
1 mA IR 15 mA 2.5 mV
6.0 6.0 mV (max)
8.0 8.0 mV (max)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz, 0.3
Impedance IAC = 0.1 IR 0.8 0.8 (max)
eN Wideband Noise IR = 100 A 35 Vrms
10 Hz f 10 kHz

5 www.national.com
LM4040

LM4040-2.0
Electrical Characteristics (Industrial Temperature Range) (Continued)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Re-
verse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively.
LM4040BIM3
LM4040AIM3
LM4040BIZ
Typical LM4040AIZ Units
Symbol Parameter Conditions LM4040BIM7
(Note 4) (Limit) (Limit)
(Limit)
(Note 5)
(Note 5)
VR Reverse Breakdown Voltage t = 1000 hrs
Long Term Stability T = 25C 0.1C 120 ppm
IR = 100 A
VHYST Thermal Hysteresis T = 40C to +125C
0.08 %
(Note 8)

LM4040-2.0
Electrical Characteristics (Industrial Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial
Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively.
Symbol Parameter Conditions Typical LM4040CIM3 LM4040DIM3 LM4040EIM7 Units
(Note 4) LM4040CIZ LM4040DIZ LM4040EIZ (Limit)
LM4040CIM7 LM4040DIM7 (Limit)
(Limit) (Limit) (Note 5)
(Note 5) (Note 5)
VR Reverse Breakdown IR = 100 A 2.048 V
Voltage
Reverse Breakdown IR = 100 A 10 20 41 mV (max)
Voltage Tolerance
23 40 60 mV (max)
(Note 6)
IRMIN Minimum Operating 45 A
Current 60 65 65 A (max)
65 70 70 A (max)
VR/T Average Reverse IR = 10 mA 20 ppm/C
Breakdown Voltage
Temperature IR = 1 mA 15 100 150 150 ppm/C (max)
Coefficient
IR = 100 A 15 ppm/C
(Note 6)
VR/IR Reverse Breakdown IRMIN IR 1 mA 0.3 mV
Voltage Change with 0.8 1.0 1.0 mV (max)
Operating Current
1.0 1.2 1.2 mV (max)
Change
1 mA IR 15 mA 2.5 mV
(Note *NO TARGET
FOR FNXref 6.0 8.0 8.0 mV (max)
NS4914*) 8.0 10.0 10.0 mV (max)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz 0.3
Impedance IAC = 0.1 IR 0.9 1.1 1.1 (max)
eN Wideband Noise IR = 100 A 35 Vrms
10 Hz f 10 kHz
VR Reverse Breakdown t = 1000 hrs
Voltage Long Term T = 25C 0.1C 120 ppm
Stability IR = 100 A
VHYST Thermal Hysteresis T = 40C to +125C
0.08 %
(Note 8)

www.national.com 6
 LM4040
LM4040-2.0
Electrical Characteristics (Extended Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial
Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively.
Symbol Parameter Conditions Typical LM4040CEM3 LM4040DEM3 LM4040EEM3 Units
(Note 4) (Limit) (Limit) (Limit) (Limit)
(Note 5) (Note 5) (Note 5)
VR Reverse Breakdown IR = 100 A 2.048 V
Voltage
Reverse Breakdown IR = 100 A 10 20 41 mV (max)
Voltage Tolerance
30 50 70 mV (max)
(Note 6)
IRMIN Minimum Operating 45 A
Current 60 65 65 A (max)
68 73 73 A (max)
VR/T Average Reverse IR = 10 mA 20 ppm/C
Breakdown Voltage
Temperature IR = 1 mA 15 100 150 150 ppm/C (max)
Coefficient
IR = 100 A 15 ppm/C
(Note 6)
VR/IR Reverse Breakdown IRMIN IR 1 mA 0.3 mV
Voltage Change with
Operating Current 0.8 1.0 1.0 mV (max)
Change
1.0 1.2 1.2 mV (max)
(Note 7)
1 mA IR 15 mA 2.5 mV
6.0 8.0 8.0 mV (max)
8.0 10.0 10.0 mV (max)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz, 0.3
Impedance IAC = 0.1 IR 0.9 1.1 1.1 (max)
eN Wideband Noise IR = 100 A 35 Vrms
10 Hz f 10 kHz
VR Reverse Breakdown t = 1000 hrs
Voltage Long Term T = 25C 0.1C 120 ppm
Stability IR = 100 A
VHYST Thermal Hysteresis T = 40C to +125C
0.08 %
(Note 8)

LM4040-2.5
Electrical Characteristics (Industrial Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Re-
verse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively.
LM4040BIM3
LM4040AIM3
LM4040BIZ
Typical LM4040AIZ Units
Symbol Parameter Conditions LM4040BIM7
(Note 4) (Limit) (Limit)
Limits
(Note 5)
(Note 5)
VR Reverse Breakdown Voltage IR = 100 A 2.500 V
Reverse Breakdown Voltage IR = 100 A 2.5 5.0 mV (max)
Tolerance (Note 6) 19 21 mV (max)
IRMIN Minimum Operating Current 45 A
60 60 A (max)
65 65 A (max)

7 www.national.com
LM4040

LM4040-2.5
Electrical Characteristics (Industrial Temperature Range) (Continued)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Re-
verse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively.
LM4040BIM3
LM4040AIM3
LM4040BIZ
Typical LM4040AIZ Units
Symbol Parameter Conditions LM4040BIM7
(Note 4) (Limit) (Limit)
Limits
(Note 5)
(Note 5)
VR/T Average Reverse Breakdown IR = 10 mA 20 ppm/C
Voltage Temperature IR = 1 mA 15 100 100 ppm/C (max)
Coefficient (Note 6) IR = 100 A 15 ppm/C
VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA 0.3 mV
Change with Operating 0.8 0.8 mV (max)
Current Change (Note 7) 1.0 1.0 mV (max)
1 mA IR 15 mA 2.5 mV
6.0 6.0 mV (max)
8.0 8.0 mV (max)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz, 0.3
Impedance IAC = 0.1 IR 0.8 0.8 (max)
eN Wideband Noise IR = 100 A 35 Vrms
10 Hz f 10 kHz
VR Reverse Breakdown Voltage t = 1000 hrs
Long Term Stability T = 25C 0.1C 120 ppm
IR = 100 A
VHYST Thermal Hysteresis T = 40C to +125C
0.08 %
(Note 8)

LM4040-2.5
Electrical Characteristics (Industrial Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial
Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively.
Symbol Parameter Conditions Typical LM4040CIM3 LM4040DIM3 LM4040EIM7 Units
(Note 4) LM4040DIZ LM4040DIZ LM4040EIZ (Limit)
LM4040CIM7 LM4040DIM7 Limits
Limits Limits (Note 5)
(Note 5) (Note 5)
VR Reverse Breakdown IR = 100 A 2.500 V
Voltage
Reverse Breakdown IR = 100 A 12 25 50 mV (max)
Voltage Tolerance
29 49 74 mV (max)
(Note 6)
IRMIN Minimum Operating 45 A
Current 60 65 65 A (max)
65 70 70 A (max)
VR/T Average Reverse IR = 10 mA 20 ppm/C
Breakdown Voltage 15 100 150 150
IR = 1 mA ppm/C (max)
Temperature
Coefficient(Note 6) IR = 100 A 15 ppm/C

www.national.com 8
 LM4040
LM4040-2.5
Electrical Characteristics (Industrial Temperature Range) (Continued)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial
Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively.
Symbol Parameter Conditions Typical LM4040CIM3 LM4040DIM3 LM4040EIM7 Units
(Note 4) LM4040DIZ LM4040DIZ LM4040EIZ (Limit)
LM4040CIM7 LM4040DIM7 Limits
Limits Limits (Note 5)
(Note 5) (Note 5)
VR/IR Reverse Breakdown IRMIN IR 1 mA 0.3 mV
Voltage Change with 0.8 1.0 1.0 mV (max)
Operating Current 1.0 1.2 1.2 mV (max)
Change 1 mA IR 15 mA 2.5 mV
(Note 7)
6.0 8.0 8.0 mV (max)
8.0 10.0 10.0 mV (max)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz 0.3
Impedance IAC = 0.1 IR 0.9 1.1 1.1 (max)
eN Wideband Noise IR = 100 A 35 Vrms
10 Hz f 10 kHz
VR Reverse Breakdown t = 1000 hrs
Voltage Long Term T = 25C 0.1C 120 ppm
Stability IR = 100 A
VHYST Thermal Hysteresis T = 40C to +125C
0.08 %
(Note 8)

LM4040-2.5
Electrical Characteristics (Extended Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial
Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively.
Symbol Parameter Conditions Typical LM4040CEM3 LM4040DEM3 LM4040EEM3 Units
(Note 4) Limits Limits Limits (Limit)
(Note 5) (Note 5) (Note 5)
VR Reverse Breakdown IR = 100 A 2.500 V
Voltage
Reverse Breakdown IR = 100 A 12 25 50 mV (max)
Voltage
38 63 88 mV (max)
Tolerance(Note 6)
IRMIN Minimum Operating 45 A
Current 60 65 65 A (max)
68 73 73 A (max)
VR/T Average Reverse IR = 10 mA 20 ppm/C
Breakdown Voltage 15 100 150 150
IR = 1 mA ppm/C (max)
Temperature
Coefficient (Note 6) IR = 100 A 15 ppm/C
VR/IR Reverse Breakdown IRMIN IR 1 mA 0.3 mV
Voltage Change with
Operating Current 0.8 1.0 1.0 mV (max)
Change
1.0 1.2 1.2 mV (max)
(Note 7)
1 mA IR 15 mA 2.5 mV
6.0 8.0 8.0 mV (max)
8.0 10.0 10.0 mV (max)

9 www.national.com
LM4040

LM4040-2.5
Electrical Characteristics (Extended Temperature Range) (Continued)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial
Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively.
Symbol Parameter Conditions Typical LM4040CEM3 LM4040DEM3 LM4040EEM3 Units
(Note 4) Limits Limits Limits (Limit)
(Note 5) (Note 5) (Note 5)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz, 0.3
Impedance IAC = 0.1 IR 0.9 1.1 1.1 (max)
eN Wideband Noise IR = 100 A 35 Vrms
10 Hz f 10 kHz
VR Reverse Breakdown t = 1000 hrs
Voltage Long Term T = 25C 0.1C 120 ppm
Stability IR = 100 A
VHYST Thermal Hysteresis T = 40C to +125C
0.08 %
(Note 8)

LM4040-3.0
Electrical Characteristics (Industrial Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Re-
verse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively.
LM4040BIM3
LM4040AIM3
LM4040BIZ
Typical LM4040AIZ Units
Symbol Parameter Conditions LM4040BIM7
(Note 4) (Limit) (Limit)
Limits
(Note 5)
(Note 5)
VR Reverse Breakdown Voltage IR = 100 A 3.000 V
Reverse Breakdown Voltage IR = 100 A 3.0 6.0 mV (max)
Tolerance (Note 6) 22 26 mV (max)
IRMIN Minimum Operating Current 47 A
62 62 A (max)
67 67 A (max)
VR/T Average Reverse Breakdown IR = 10 mA 20 ppm/C
Voltage Temperature IR = 1 mA 15 100 100 ppm/C (max)
Coefficient (Note 6) IR = 100 A 15 ppm/C
VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA 0.6 mV
Change with Operating 0.8 0.8 mV (max)
Current Change (Note 7) 1.1 1.1 mV (max)
1 mA IR 15 mA 2.7 mV
6.0 6.0 mV (max)
9.0 9.0 mV (max)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz, 0.4
Impedance IAC = 0.1 IR 0.9 0.9 (max)
eN Wideband Noise IR = 100 A 35 Vrms
10 Hz f 10 kHz
VR Reverse Breakdown Voltage t = 1000 hrs
Long Term Stability T = 25C 0.1C 120 ppm
IR = 100 A
VHYST Thermal Hysteresis T = 40C to +125C
0.08 %
(Note 8)

www.national.com 10
 LM4040
LM4040-3.0
Electrical Characteristics (Industrial Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial
Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively.
Symbol Parameter Conditions Typical LM4040CIM3 LM4040DIM3 LM4040EIM7 Units
(Note 4) LM4040DIZ LM4040DIZ LM4040EIZ (Limit)
LM4040CIM7 LM4040DIM7 Limits
Limits Limits (Note 5)
(Note 5) (Note 5)
VR Reverse Breakdown IR = 100 A 3.000 V
Voltage
Reverse Breakdown IR = 100 A 15 30 60 mV (max)
Voltage Tolerance
34 59 89 mV (max)
(Note 6)
IRMIN Minimum Operating 45 A
Current 60 65 65 A (max)
65 70 70 A (max)
VR/T Average Reverse IR = 10 mA 20 ppm/C
Breakdown Voltage 15 100 150 150
IR = 1 mA ppm/C (max)
Temperature
Coefficient(Note 6) IR = 100 A 15 ppm/C
VR/IR Reverse Breakdown IRMIN IR 1 mA 0.4 mV
Voltage Change with 0.8 1.1 1.1 mV (max)
Operating Current 1.1 1.3 1.3 mV (max)
Change 1 mA IR 15 mA 2.7 mV
(Note 7)
6.0 8.0 8.0 mV (max)
9.0 11.0 11.0 mV (max)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz 0.4
Impedance IAC = 0.1 IR 0.9 1.2 1.2 (max)
eN Wideband Noise IR = 100 A 35 Vrms
10 Hz f 10 kHz
VR Reverse Breakdown t = 1000 hrs
Voltage Long Term T = 25C 0.1C 120 ppm
Stability IR = 100 A
VHYST Thermal Hysteresis T = 40C to +125C
0.08 %
(Note 8)

LM4040-3.0
Electrical Characteristics (Extended Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial
Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively.
Symbol Parameter Conditions Typical LM4040CEM3 LM4040DEM3 LM4040EEM3 Units
(Note 4) Limits Limits Limits (Limit)
(Note 5) (Note 5) (Note 5)
VR Reverse Breakdown IR = 100 A 3.000 V
Voltage
Reverse Breakdown IR = 100 A 15 30 60 mV (max)
Voltage
45 75 105 mV (max)
Tolerance(Note 6)
IRMIN Minimum Operating 47 A
Current 62 67 67 A (max)
70 75 75 A (max)

11 www.national.com
LM4040

LM4040-3.0
Electrical Characteristics (Extended Temperature Range) (Continued)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial
Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively.
Symbol Parameter Conditions Typical LM4040CEM3 LM4040DEM3 LM4040EEM3 Units
(Note 4) Limits Limits Limits (Limit)
(Note 5) (Note 5) (Note 5)
VR/T Average Reverse IR = 10 mA 20 ppm/C
Breakdown Voltage 15 100 150 150
IR = 1 mA ppm/C (max)
Temperature
Coefficient (Note 6) IR = 100 A 15 ppm/C
VR/IR Reverse Breakdown IRMIN IR 1 mA 0.4 mV
Voltage Change with
Operating Current 0.8 1.1 1.1 mV (max)
Change
1.1 1.3 1.3 mV (max)
(Note 7)
1 mA IR 15 mA 2.7 mV
6.0 8.0 8.0 mV (max)
9.0 11.0 11.0 mV (max)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz, 0.4
Impedance IAC = 0.1 IR 0.9 1.2 1.2 (max)
eN Wideband Noise IR = 100 A 35 Vrms
10 Hz f 10 kHz
VR Reverse Breakdown t = 1000 hrs
Voltage Long Term T = 25C 0.1C 120 ppm
Stability IR = 100 A
VHYST Thermal Hysteresis T = 40C to +125C
0.08 %
(Note 8)

LM4040-4.1
Electrical Characteristics (Industrial Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Re-
verse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively.
Symbol Parameter Conditions Typical LM4040AIM3 LM4040BIM3 Units
(Note 4) LM4040AIZ LM4040BIZ (Limit)
Limits LM4040BIM7
(Note 5) Limits
(Note 5)
VR Reverse Breakdown Voltage IR = 100 A 4.096 V
Reverse Breakdown Voltage IR = 100 A 4.1 8.2 mV (max)
Tolerance (Note 6) 31 35 mV (max)
IRMIN Minimum Operating Current 50 A
68 68 A (max)
73 73 A (max)
VR/T Average Reverse Breakdown IR = 10 mA 30 ppm/C
Voltage Temperature IR = 1 mA 20 100 100 ppm/C (max)
Coefficient(Note 6) IR = 100 A 20 ppm/C
VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA 0.5 mV
Change with Operating 0.9 0.9 mV (max)
Current Change (Note 7) 1.2 1.2 mV (max)
1 mA IR 15 mA 3.0 mV
7.0 7.0 mV (max)
10.0 10.0 mV (max)

www.national.com 12
 LM4040
LM4040-4.1
Electrical Characteristics (Industrial Temperature Range) (Continued)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Re-
verse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively.
Symbol Parameter Conditions Typical LM4040AIM3 LM4040BIM3 Units
(Note 4) LM4040AIZ LM4040BIZ (Limit)
Limits LM4040BIM7
(Note 5) Limits
(Note 5)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz, 0.5
Impedance IAC = 0.1 IR 1.0 1.0 (max)
eN Wideband Noise IR = 100 A 80 Vrms
10 Hz f 10 kHz
VR Reverse Breakdown Voltage t = 1000 hrs 120 ppm
Long Term Stability T = 25C 0.1C
IR = 100 A
VHYST Thermal Hysteresis T = 40C to +125C
0.08 %
(Note 8)

13 www.national.com
LM4040

LM4040-4.1
Electrical Characteristics (Industrial Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C and D designate initial Re-
verse Breakdown Voltage tolerances of 0.5% and 1.0%, respectively.
Symbol Parameter Conditions Typical LM4040CIM3 LM4040DIM3 Units
(Note 4) LM4040CIZ LM4040BIZ (Limit)
LM4040CIM7 LM4040DIM7
Limits Limits
(Note 5) (Note 5)
VR Reverse Breakdown Voltage IR = 100 A 4.096 V
Reverse Breakdown Voltage IR = 100 A 20 41 mV (max)
Tolerance (Note 6) 47 81 mV (max)
IRMIN Minimum Operating Current 50 A
68 73 A (max)
73 78 A (max)
VR/T Average Reverse Breakdown IR = 10 mA 30 ppm/C
Voltage Temperature IR = 1 mA 20 100 150 ppm/C (max)
Coefficient (Note 6) IR = 100 A 20 ppm/C
VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA 0.5 mV
Change with Operating 0.9 1.2 mV (max)
Current Change (Note 7) 1.2 1.5 mV (max)
1 mA IR 15 mA 3.0 mV
7.0 9.0 mV (max)
10.0 13.0 mV (max)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz, 0.5
Impedance IAC = 0.1 IR 1.0 1.3 (max)
eN Wideband Noise IR = 100 A 80 Vrms
10 Hz f 10 kHz
VR Reverse Breakdown Voltage t = 1000 hrs 120 ppm
Long Term Stability T = 25C 0.1C
IR = 100 A
VHYST Thermal Hysteresis T = 40C to +125C
0.08 %
(Note 8)

www.national.com 14
 LM4040
LM4040-5.0
Electrical Characteristics (Industrial Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Re-
verse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively.
Symbol Parameter Conditions Typical LM4040AIM3 LM4040BIM3 Units
(Note 4) LM4040AIZ LM4040BIZ (Limit)
Limits LM4040BIM7
(Note 5) Limits
(Note 5)
VR Reverse Breakdown Voltage IR = 100 A 5.000 V
Reverse Breakdown Voltage IR = 100 A 5.0 10 mV (max)
Tolerance (Note 6) 38 43 mV (max)
IRMIN Minimum Operating Current 54 A
74 74 A (max)
80 80 A (max)
VR/T Average Reverse Breakdown IR = 10 mA 30 ppm/C
Voltage Temperature IR = 1 mA 20 100 100 ppm/C (max)
Coefficient (Note 6) IR = 100 A 20 ppm/C
VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA 0.5 mV
Change with Operating 1.0 1.0 mV (max)
Current Change (Note 7) 1.4 1.4 mV (max)
1 mA IR 15 mA 3.5 mV
8.0 8.0 mV (max)
12.0 12.0 mV (max)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz, 0.5
Impedance IAC = 0.1 IR 1.1 1.1 (max)
eN Wideband Noise IR = 100 A 80 Vrms
10 Hz f 10 kHz
VR Reverse Breakdown Voltage t = 1000 hrs
Long Term Stability T = 25C 0.1C 120 ppm
IR = 100 A
VHYST Thermal Hysteresis T = 40C to +125C
0.08 %
(Note 8)

15 www.national.com
LM4040

LM4040-5.0
Electrical Characteristics (Industrial Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C and D designate initial Re-
verse Breakdown Voltage tolerances of 0.5% and 1.0%, respectively.
Symbol Parameter Conditions Typical LM4040CIM3 LM4040DIM3 Units
(Note 4) LM4040CIZ LM4040BIZ (Limit)
LM4040CIM7 LM4040DIM7
Limits Limits
(Note 5) (Note 5)
VR Reverse Breakdown Voltage IR = 100 A 5.000 V
Reverse Breakdown Voltage IR = 100 A 25 50 mV (max)
Tolerance (Note 6) 58 99 mV (max)
IRMIN Minimum Operating Current 54 A
74 79 A (max)
80 85 A (max)
VR/T Average Reverse Breakdown IR = 10 mA 30 ppm/C
Voltage Temperature IR = 1 mA 20 100 150 ppm/C (max)
Coefficient (Note 6) IR = 100 A 20 ppm/C
VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA 0.5 mV
Change with Operating 1.0 1.3 mV (max)
Current Change (Note 7) 1.4 1.8 mV (max)
1 mA IR 15 mA 3.5 mV
8.0 10.0 mV (max)
12.0 15.0 mV (max)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz, 0.5
Impedance IAC = 0.1 IR 1.1 1.5 (max)
eN Wideband Noise IR = 100 A 80 Vrms
10 Hz f 10 kHz
VR Reverse Breakdown Voltage t = 1000 hrs
Long Term Stability T = 25C 0.1C 120 ppm
IR = 100 A
VHYST Thermal Hysteresis T = 40C to +125C
0.08 %
(Note 8)

www.national.com 16
 LM4040
LM4040-5.0
Electrical Characteristics (Extended Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C and D designate initial Re-
verse Breakdown Voltage tolerances of 0.5% and 1.0%, respectively.
Symbol Parameter Conditions Typical LM4040CEM3 LM4040DEM3 Units
Limits Limits (Limit)
(Note 4) (Note 5) (Note 5)
VR Reverse Breakdown Voltage IR = 100 A 5.000 V
Reverse Breakdown Voltage IR = 100 A 25 50 mV (max)
Tolerance(Note 6) 75 125 mV (max)
IRMIN Minimum Operating Current 54 A
74 79 A (max)
83 88 A (max)
VR/T Average Reverse IR = 10 mA 30 ppm/C
Breakdown Voltage 20 100 150
IR = 1 mA ppm/C (max)
Temperature Coefficient
(Note 6) IR = 100 A 20 ppm/C
VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA 0.5 mV
Change with Operating 1.0 1.0 mV (max)
Current Change (Note 7) 1.4 1.8 mV (max)
1 mA IR 15 mA 3.5 mV
8.0 8.0 mV (max)
12.0 15.0 mV (max)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz, IAC = 0.5
Impedance 0.1 IR 1.1 1.1 (max)
eN Wideband Noise IR = 100 A 80 Vrms
10 Hz f 10 kHz
VR Reverse Breakdown Voltage t = 1000 hrs
Long Term Stability T = 25C 0.1C 120 ppm
IR = 100 A
VHYST Thermal Hysteresis T = 40C to +125C
0.08 %
(Note 8)

17 www.national.com
LM4040

LM4040-8.2
Electrical Characteristics (Industrial Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Re-
verse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively.

LM4040AIM3 LM4040BIM3
Typical Units
Symbol Parameter Conditions LM4040AIZ LM4040BIZ
(Note 4) (Limit)
Limits Limits
(Note 5) (Note 5)
VR Reverse Breakdown Voltage IR = 150 A 8.192 V
Reverse Breakdown Voltage IR = 150 A 8.2 16 mV (max)
Tolerance (Note 6) 61 70 mV (max)
IRMIN Minimum Operating Current 67 A
91 91 A (max)
95 95 A (max)
VR/T Average Reverse Breakdown IR = 10 mA 40 ppm/C
Voltage Temperature IR = 1 mA 20 100 100 ppm/C (max)
Coefficient(Note 6) IR = 150 A 20 ppm/C
VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA 0.6 mV
Change with Operating 1.3 1.3 mV (max)
Current Change (Note 7) 2.5 2.5 mV (max)
1 mA IR 15 mA 7.0 mV
10.0 10.0 mV (max)
18.0 18.0 mV (max)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz, 0.6
Impedance IAC = 0.1 IR 1.5 1.5 (max)
eN Wideband Noise IR = 150 A 130 Vrms
10 Hz f 10 kHz
VR Reverse Breakdown Voltage t = 1000 hrs
Long Term Stability T = 25C 0.1C 120 ppm
IR = 150 A
VHYST Thermal Hysteresis T = 40C to +125C
0.08 %
(Note 8)

www.national.com 18
 LM4040
LM4040-8.2
Electrical Characteristics (Industrial Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C and D designate initial Re-
verse Breakdown Voltage tolerances of 0.5% and 1.0%, respectively.

LM4040CIM3 LM4040DIM3
Typical Units
Symbol Parameter Conditions LM4040CIZ LM4040DIZ
(Note 4) (Limit)
Limits Limits
(Note 5) (Note 5)
VR Reverse Breakdown Voltage IR = 150 A 8.192 V
Reverse Breakdown Voltage IR = 150 A 41 82 mV (max)
Tolerance (Note 6) 94 162 mV (max)
IRMIN Minimum Operating Current 67 A
91 96 A (max)
95 100 A (max)
VR/T Average Reverse Breakdown IR = 10 mA 40 ppm/C
Voltage Temperature IR = 1 mA 20 100 150 ppm/C (max)
Coefficient (Note 6) IR = 150 A 20 ppm/C
VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA 0.6 mV
Change with Operating 1.3 1.7 mV (max)
Current Change (Note 7) 2.5 3.0 mV (max)
1 mA IR 15 mA 7.0 mV
10.0 15.0 mV (max)
18.0 24.0 mV (max)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz, 0.6
Impedance IAC = 0.1 IR 1.5 1.9 (max)
eN Wideband Noise IR = 150 A 130 Vrms
10 Hz f 10 kHz
VR Reverse Breakdown Voltage t = 1000 hrs
Long Term Stability T = 25C 0.1C 120 ppm
IR = 150 A
VHYST Thermal Hysteresis T = 40C to +125C
0.08 %
(Note 8)

19 www.national.com
LM4040

LM4040-10.0
Electrical Characteristics (Industrial Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Re-
verse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively.

LM4040AIM3 LM4040BIM3
Typical Units
Symbol Parameter Conditions LM4040AIZ LM4040BIZ
(Note 4) (Limit)
Limits Limits
(Note 5) (Note 5)
VR Reverse Breakdown Voltage IR = 150 A 10.00 V
Reverse Breakdown Voltage IR = 150 A 10 20 mV (max)
Tolerance (Note 6) 75 85 mV (max)
IRMIN Minimum Operating Current 75 A
100 100 A (max)
103 103 A (max)
VR/T Average Reverse Breakdown IR = 10 mA 40 ppm/C
Voltage Temperature IR = 1 mA 20 100 100 ppm/C (max)
Coefficient (Note 6) IR = 150 A 20 ppm/C
VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA 0.8 mV
Change with Operating 1.5 1.5 mV (max)
Current Change (Note 7) 3.5 3.5 mV (max)
1 mA IR 15 mA 8.0 mV
12.0 12.0 mV (max)
23.0 23.0 mV (max)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz, 0.7
Impedance IAC = 0.1 IR 1.7 1.7 (max)
eN Wideband Noise IR = 150 A 180 Vrms
10 Hz f 10 kHz
VR Reverse Breakdown Voltage t = 1000 hrs
Long Term Stability T = 25C 0.1C 120 ppm
IR = 150 A
VHYST Thermal Hysteresis T = 40C to +125C 0.08 %
(Note 8)

www.national.com 20
 LM4040
LM4040-10.0
Electrical Characteristics (Industrial Temperature Range)
Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C and D designate initial Re-
verse Breakdown Voltage tolerances of 0.5% and 1.0%, respectively.

LM4040CIM3 LM4040DIM3
Typical Units
Symbol Parameter Conditions LM4040CIZ LM4040DIZ
(Note 4) (Limit)
Limits Limits
(Note 5) (Note 5)
VR Reverse Breakdown Voltage IR = 150 A 10.00 V
Reverse Breakdown Voltage IR = 150 A 50 100 mV (max)
Tolerance (Note 6) 115 198 mV (max)
IRMIN Minimum Operating Current 75 A
100 110 A (max)
103 113 A (max)
VR/T Average Reverse Breakdown IR = 10 mA 40 ppm/C
Voltage Temperature IR = 1 mA 20 100 150 ppm/C (max)
Coefficient (Note 6) IR = 150 A 20 ppm/C
VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA 0.8 mV
Change with Operating 1.5 2.0 mV (max)
Current Change (Note 7) 3.5 4.0 mV (max)
1 mA IR 15 mA 8.0 mV
12.0 18.0 mV (max)
23.0 29.0 mV (max)
ZR Reverse Dynamic IR = 1 mA, f = 120 Hz, 0.7
Impedance IAC = 0.1 IR 1.7 2.3 (max)
eN Wideband Noise IR = 150 A
180 Vrms
10 Hz f 10 kHz
VR Reverse Breakdown Voltage t = 1000 hrs
Long Term Stability T = 25C 0.1C 120 ppm

IR = 150 A
VHYST Thermal Hysteresis T = 40C to +125C 0.08 %
(Note 8)

21 www.national.com
LM4040

Electrical Characteristics(Notes)
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed
specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test
conditions.
Note 2: The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature), JA (junction to
ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is PDmax = (TJmax TA)/JA or the
number given in the Absolute Maximum Ratings, whichever is lower. For the LM4040, TJmax = 125C, and the typical thermal resistance (JA), when board mounted,
is 326C/W for the SOT-23 package, and 180C/W with 0.4" lead length and 170C/W with 0.125" lead length for the TO-92 package and 415C/W for the SC70
Package.
Note 3: The human body model is a 100 pF capacitor discharged through a 1.5 k resistor into each pin. The machine model is a 200 pF capacitor discharged
directly into each pin.
Note 4: Typicals are at TJ = 25C and represent most likely parametric norm.
Note 5: Limits are 100% production tested at 25C. Limits over temperature are guaranteed through correlation using Statistical Quality Control (SQC) methods.
The limits are used to calculate Nationals AOQL.
Note 6: The boldface (over-temperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance
[(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to
T MIN or TMAX, and VR is the reverse breakdown voltage. The total over-temperature tolerance for the different grades in the industrial temperature range where
maxT = 65C is shown below:

A-grade: 0.75% = 0.1% 100 ppm/C x 65C

B-grade: 0.85% = 0.2% 100 ppm/C x 65C
C-grade: 1.15% = 0.5% 100 ppm/C x 65C
D-grade: 1.98% = 1.0% 150 ppm/C x 65C
E-grade: 2.98% = 2.0% 150 ppm/C x 65C
The total over-temperature tolerance for the different grades in the exteded temperature range where max T = 100 C is shown below:

C-grade: 1.5% = 0.5% 100 ppm/C x 100C

D-grade: 2.5% = 1.0% 150 ppm/C x 100C
E-grade: 3.5% = 2.0% 150 ppm/C x 100C
Therefore, as an example, the A-grade LM4040-2.5 has an over-temperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV.
Note 7: Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into
account separately.
Note 8: Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the 25C measurement after cycling
to temperature +125C.

www.national.com 22
 LM4040
Typical Performance Characteristics
Temperature Drift for Different Output Impedance vs Frequency
Average Temperature Coefficient

01132304
01132310

Output Impedance vs Frequency Reverse Characteristics and

Minimum Operating Current

01132312
01132311

Noise Voltage vs Frequency

01132313

23 www.national.com
LM4040

Start-Up Characteristics
LM4040-2.5 RS = 30k

01132305

01132307

LM4040-5.0 RS = 30k LM4040-10.0 RS = 30k

01132308 01132309

Functional Block Diagram

01132314

www.national.com 24
 LM4040
Applications Information The device is thermal cycled to temperature -40C and then
measured at 25C. Next the device is thermal cycled to
The LM4040 is a precision micro-power curvature-corrected temperature +125C and again measured at 25C. The re-
bandgap shunt voltage reference. For space critical applica- sulting VOUT delta shift between the 25C measurements is
tions, the LM4040 is available in the sub-miniature SOT-23 thermal hysteresis. Thermal hysteresis is common in preci-
and SC70 surface-mount package. The LM4040 has been sion references and is induced by thermal-mechanical pack-
designed for stable operation without the need of an external age stress. Changes in environmental storage temperature,
capacitor connected between the + pin and the pin. If, operating temperature and board mounting temperature are
however, a bypass capacitor is used, the LM4040 remains all factors that can contribute to thermal hysteresis.
stable. Reducing design effort is the availability of several
In a conventional shunt regulator application (Figure 1) , an
fixed reverse breakdown voltages: 2.048V, 2.500V, 3.000V,
external series resistor (RS) is connected between the sup-
4.096V, 5.000V, 6.000, 8.192V, and 10.000V. The minimum
ply voltage and the LM4040. RS determines the current that
operating current increases from 60 A for the LM4040-
flows through the load (IL) and the LM4040 (IQ). Since load
2.048 and LM4040-2.5 to 100 A for the LM4040-10.0. All
current and supply voltage may vary, RS should be small
versions have a maximum operating current of 15 mA.
enough to supply at least the minimum acceptable IQ to the
LM4040s in the SOT-23 packages have a parasitic Schottky LM4040 even when the supply voltage is at its minimum and
diode between pin 2 () and pin 3 (Die attach interface the load current is at its maximum value. When the supply
contact). Therefore, pin 3 of the SOT-23 package must be voltage is at its maximum and IL is at its minimum, RS should
left floating or connected to pin 2. be large enough so that the current flowing through the
LM4040s in the SC70 have a parasitic Schottky diode be- LM4040 is less than 15 mA.
tween pin 1 () and pin 2 (Die attach interface contact). RS is determined by the supply voltage, (VS), the load and
Therefore, pin 2 must be left floating or connected to pin1. operating current, (IL and IQ), and the LM4040s reverse
The 4.096V version allows single +5V 12-bit ADCs or DACs breakdown voltage, VR.
to operate with an LSB equal to 1 mV. For 12-bit ADCs or
DACs that operate on supplies of 10V or greater, the 8.192V
version gives 2 mV per LSB.
The typical thermal hysteresis specification is defined as the
change in +25C voltage measured after thermal cycling.

Typical Applications

01132315

FIGURE 1. Shunt Regulator

25 www.national.com
LM4040

Typical Applications (Continued)

01132316
**Ceramic monolithic
*Tantalum

FIGURE 2. LM4040-4.1s Nominal 4.096 breakdown voltage gives ADC12451 1 mV/LSB

www.national.com 26
 LM4040
Typical Applications (Continued)

01132317

FIGURE 3. Bounded amplifier reduces saturation-induced delays and can prevent succeeding stage damage.
Nominal clamping voltage is 11.5V (LM4040s reverse breakdown voltage +2 diode VF).

01132318

FIGURE 4. Protecting Op Amp input. The bounding voltage is 4V with the LM4040-2.5
(LM4040s reverse breakdown voltage + 3 diode VF).

27 www.national.com
LM4040

Typical Applications (Continued)

01132319

FIGURE 5. Precision 4.096V Reference

01132321

01132322

FIGURE 6. Precision 1 A to 1 mA Current Sources

www.national.com 28
 LM4040
Physical Dimensions inches (millimeters)
unless otherwise noted

Plastic Surface Mount Package (M3)

NS Package Number MF03A
(JEDEC Registration TO-236AB)

Plastic Package (Z)

NS Package Number Z03A

29 www.national.com
LM4040 Precision Micropower Shunt Voltage Reference
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

Molded Package (SC70)

NS Package Number MAA05A

LIFE SUPPORT POLICY

NATIONALS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant support device or system whose failure to perform
into the body, or (b) support or sustain life, and can be reasonably expected to cause the failure of
whose failure to perform when properly used in the life support device or system, or to affect its
accordance with instructions for use provided in the safety or effectiveness.
labeling, can be reasonably expected to result in a
significant injury to the user.
National Semiconductor National Semiconductor National Semiconductor National Semiconductor
Corporation Europe Asia Pacific Customer Japan Ltd.
Americas Fax: +49 (0) 180-530 85 86 Response Group Tel: 81-3-5639-7560
Email: support@nsc.com Email: europe.support@nsc.com Tel: 65-2544466 Fax: 81-3-5639-7507
Deutsch Tel: +49 (0) 69 9508 6208 Fax: 65-2504466
English Tel: +44 (0) 870 24 0 2171 Email: ap.support@nsc.com
www.national.com Franais Tel: +33 (0) 1 41 91 8790

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.