Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Logging

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Mobilization

Mobilization
LOGIQ™ Logging Truck
LOGIQ™ logging trucks are an evolution in onshore logging • Power Distribution Panel
technology. The trucks are designed to operate all of the new – Power type – 110V and 220V sockets
evolution tools at well depths of up to 27,000 ft in single
– Direct Lights – 110V and 12V direct lights
drum (open-hole) orr dual drum (open and cased-hole)
configuration. The latest state-of-the-art technology and – Floodlights – 110V, 500W quartz
engineering design make the truck and computer system a – Air Conditioners – four DuoTherm; 13,500 BTU/
platform that can be upgraded as technology evolves. 5,600 BTU heating for each
– Intercom – 3M Model D-15
Logging Cabin Features • Curbside Tool Racks (with airbags)
– Top – four, 2-in. diameter tools, maximum length
• Exterior 92 in. (233.7 cm)
– Material – 1/8-in. aluminum – Middle, Lower – holds two, 4-in. diameter tools,
– Construction – welded aluminum maximum length 98 in. (249 cm)
– Insulation – 2-in. urethane foam • Roadside Tool Racks (with airbags)
– Entrance(s) – single door – Top – four, 2-in. diameter tools, maximum length
• Interior 88 in. (223.5 cm)
– Material – brushed anodized aluminum skin – Middle, Lower – holds two, 4-in. diameter tools,
maximum length 136 in. (345.4 cm)
– Console – winch operator console for depth
panel, engine, and generator panel • Underbelly Tool Rack
– Window – one large sliding window facing reel – Holds four, 5-in. diameter tools and two, 4-in.
and frame assembly diameter tools; maximum length 22 ft (6.7 m)
with pneumatic tool retainers

LOGIQ™ Logging Truck

Truck Chassis and Engine Specifications


Make/Model Height Width Length Wheel Base Cab to Axle Engine Model Horsepower Fuel Tanks
Two 24.5-in.
Kenworth 13 ft, 2 in. 7 ft, 11 in. 38 ft, 4 in. 24 ft, 6 in. 16 ft Caterpillar 380 hp at
diameter aluminum,
T-800 6X4 (4.01 m) (2.41 m) (11.68 m) (8.86 m) (4.87 m) Cat-13 2100 RPM
cap: 110 and 50 USG
Winch Specifications
• Two-speed transmission, speeds from 55,000 ft/hour • Large drum capable of holding 25,500 of 0.490-in.
down to 360 ft/hour with an enhanced low speed option heptacable slammer cable or 28,500 ft of 0.472-in.
down to 50 ft per hour. heptacable slammer. Small drum capable of holding
• Single speed transmission cased-hole drum with speeds 22,500 ft of 5/16 single conductor cable or 28,500 ft of
up to 52,000 ft/hour and down to 360 ft/hour with an 7/32 single conductor cable.
enhanced slow speed option down to 50 ft/hour • Satellite dish and communications optional
• Rexroth AA4VG pumps and AA6V motors with
electronic controls



LOGIQ™ Modular Skid Mounted Logging Unit




Cabin Module

The unit has entry doors on both sides, and cooling and heating is provided by four units. The exterior
material is 3/16-in. aluminum with 2.0-in. urethane foam walls. The cabin is ergonomically designed and
holds a single or double LOGIQ™ logging system. The control panel includes all functions, such as:
gauges for power pack, winch controls, generator controls, start/stop, pump controls, and an integrated
touch screen depth panel.





Winch Module

It has interchangeable reels for open-hole and cased-hole purposes. Both have maximum slew rate angles
of up to ± 12°. The open-hole reel has a two-speed direct drive transmission. Speeds vary from 55,000
ft/hour down to 360 ft/hour with an enhanced low speed option down to 50 ft/hour. The cased-hole reel
has a single speed direct drive transmission with speeds up to 52,000 ft/hour and down to 360 ft/hour with
an enhanced slow speed option down to 50 ft/hour. It also features a Rexroth 90 cc pump and 80 cc
motors with electronic controls. The unit includes a large drum capable of holding 25,500 ft of 0.490-in.
heptacable slammer cable or 28,500 ft of 0.472-in. heptacable slammer. The small drum is capable of
holding 22,500 ft of 5/16 single conductor cable or 28,500 ft of 7/32 single conductor cable.

Power Pack
Its main component is the Caterpillar 3126 EURO-3 engine with 230 hp. It runs the hydraulic pumps for
the winch and 30 kW hydraulic generator and other auxiliary hydraulic controls. All electrical and
hydraulic connections are quick change so set up time is minimal. All service access points are easy to
reach. The power pack unit has an enclosed pollution drip pan with easy access drain plugs. It also
includes air-start with standard rig air connections.

Volvo Truck Chassis





You might also like