BALANCED PISTON TYPE P

RELIEF VALVE

20 to 380ℓ/min
Relief Valve 21MPa T

Features
qBalanced piston relief valve. eA vent port enables remote control
wOptimum pressure control for hy- of pressure and use of an unloading
draulic circuit allows operation as a circuit.
safety valve.

Specifications
Model No. Nominal Maximum Working Maximum Pressure adjustment range Weight kg
Diameter Pressure Flow Rate
Screw Mounting Gasket Mounting (Size) MPa{kgf/cm2} ℓ/min MPa{kgf/cm2} T Type G Type
R-T03-A-12 R-G03-A-12 * to 1   {* to 10.2}
3/8 20 3.0 4.3
B-12 B-12 * to 2.5 {* to 25.5}
R-T03-1-12 R-G03-1-12 * to 7 {* to 71.4}
3/8 80 3.0 4.3

F
3-12 3-12 21 {214} 3.5 to 21 {35.7 to 214}
R-T06-1-20 R-G06-1-20 P, X (Vent Ports) * to 7 {* to 71.4}
3/4 170 3.9 5.3
3-20 3-20 3.5 to 21 {35.7 to 214}
R-T10-1-20 R-G10-1-20 * to 7 {* to 71.4}

Pressure Control Valve

1¼ 380 7.7 7.7
3-20 3-20 3.5 to 21 {35.7 to 214}
Note) See the Flow Rate - Low Pressure characteristics for information about items marked with an asterisk (*).

•Handling v When using a relief valve as a safety m Use the following table for specifica-
z To adjust pressure, loosen the lock valve, use a pressure override that is tion when a sub plate is required.
nut and then rotate the handle clock- higher than the required circuit pres- Pipe Applicable Pump
sure. Model No. Weight kg
wise (rightward) to increase pressure Diameter Model
or counterclockwise (leftward) to de- b When using a remote control valve, MR-03-10 3/8 1.6 R-G03-*-12
crease it. connect piping to the relief valve port.
MR-06-20 3/4
x Make sure that tank port back pres- Pipe capacity can be a source of vi- 3.5 R-G06-*-20
sure is no greater than 0.2MPa bration. Use of thick iron pipe with an MR-06X-20 1
{2.0kgf/cm2}. For tank piping of the A inside diameter of no more than 4mm MR-10-20 1¼
and B type pressure adjusting rang- and a connection length of no more 8.5 R-G10-*-20
MR-10X-20 1½
es, return directly to the tank with- than three meters is recommended.
out connecting any other piping and n Pressure becomes unstable when at
eliminate back pressure. slow control flow rates. Use a flow , The following are the bundled mount-
c The pressure adjustment range for rate of no less than 8 ℓ/min for the 03, ing bolts.
the high vent type is 1.3MPa {13.3kgf/ 06 sizes, and 10 ℓ/min for the 10 size. Bolt Tightening Torque
cm2}. Note that R-T/G03 is not a high Use a drain type relief valve in the Model No. Q'ty
Dimensions N·m{kgf·cm}
vent type. case of a flow rate that is less than
45 to 55
the minimum flow rate. R-G03-*-12 M10×75ℓ 4
{460 to 560}
190 to 235
R-G06-*-20 M16×80ℓ 4
{1940 to 2400}
370 to 460
R-G10-*-20 M20×105ℓ 4
{3770 to 4690}
Note) 
For mounting bolts, use bolts of 12.9
strength classification or equivalent.
Explanation of model No.
R – T 06 – 1 – (H) – 20
Design number

Auxiliary symbol H: High vent (excluding 03 size)

Pressure adjustment range 1, 3, A, B

Nominal diameter (size)

Mounting method T: Screw Mounting G: Gasket Mounting

Relief valve

F-1
 Installation Dimension Drawings
A R-T03-*-12 (Screw Mounting) R-G03-*-12 (Gasket Mounting)

C
65

63 63
MAX. 104.5
C
42.5 MAX. 104.5 40

Pressure adjusting handle Pressure adjusting handle

(Changeable to two other directions)

E
(Changeable to three other directions)
Vent connection port Vent connection port
Rc 3/8 Rc 3/8

φ 58
φ 58

F Pressure gauge
Pressure gauge attachment port X
56

attachment port
128.5

Rc 1/4

138
P Rc 1/4
P

109
φ6
90
P
Pressure Control Valve

60
T
53

13
3-φ 45 3- Rc 3/8 72.5 6 80
85
From back
4- φ 17.5x10.8 counterbore
φ 11 holes
T
H

I R-T**-*-20 (Screw Mounting) R-G**-*-20 (Gasket Mounting)

J
G
H

K 63 63
MAX. 104.5 D MAX. 104.5 F

L Pressure adjusting handle

(Changeable to three other directions)
Pressure adjusting handle
(Changeable to two other directions)
From back
4- φ Jx1 counterbore
Vent connection port φ K holes
Rc 3/8

M
φ 58
φ 58

Pressure gauge
attachment port Pressure gauge
B

attachment port X
Rc 1/4

N
A

P P Rc 1/4
P
φ6

B
C

A
C

3- Rc “J” T
H

E F
L

O T
E 6 D

Model No. A B C D E F G H J Model No. A B C D E F G H J K L

R-T06-*-20 128.5 61.5 47.5 45 90 54 35.5 71 3/4 R-G06-*-20 151 131.5 106.5 102 58 40 65 69.5 26 18 16.1
R-T10-*-20 153.5 72 62 62.5 125 69 47 94 1¼ R-G10-*-20 162.5 143 110 127 80 50 86 70.5 32 22 17.7

F-2
 Sub Plate MR-03-10 MR-**-20
Rc 1/4 (back)
Rc 1/4 (back) φ 5 hole
80 φ 3 hole AA 4- M“RR”
24 52 14 BB
4- φ 17.5x10.8 counterbore
20 26 φ 11 holes

EE
MM
LL
X

DD
FF
25
26 15 X
P

KK
4- M10 holes
12

JJ

WW
HH

74.6
GG
66.7
XX

CC
P

66
42
52
90

2- Rc 3/8 (back) T
φ 14.7 holes
T

4- φ 20x1 counterbore
102 φ 14 holes PP
2- φ “UU”
130 QQ NN
φ 7x8 φ 7x10 YY 2- Rc “VV” (back)

SS
TT
Dimensions (mm)
Model No.
AA BB CC DD EE FF GG HH JJ KK LL MM NN PP QQ RR SS TT UU VV WW XX YY
MR-06-20 3/4
150 127 125 7.9 21.8 9.5 62.5 55.5 42.9 17.5 23.7 14.5 69.9 34.9 16.1 16 38 22 22 98.5 106.5 102
MR-06X-20 1
MR-10-20 1¼
175 152.4 150 6.4 39.2 15.9 71.3 58.7 50.8 14.3 25.6 25.9 92.1 46.1 17.5 20 55 22 28.5 102.5 110 127
MR-10X-20 1½

Performance Curves Hydraulic Operating Fluid Kinematic Viscosity 32mm2 /s

Pressure - Flow Rate Characteristics F
R-*03-*-12 R-*06-*-20 R-*10-*-20

Pressure Control Valve

21 {214} 21 {214} 21 {214}
MPa{kgf/cm }

MPa{kgf/cm }
MPa{kgf/cm }

2
2

Pressure

{194}

Pressure
20 {204}
Pressure

20 {204} 19
19 {194} 19 {194} 17 {173}

7 {71.4} 7 {71.4} 7 {71.4}

6 {61.2} 6 {61.2} 6 {61.2}
5 {51.0} 5 {51.0} 5 {51.0}

0 20 40 60 80 0 50 100 150 200 0 100 200 300

Flow rate ℓ/min Flow rate ℓ/min Flow rate ℓ/min

Flow Rate - Minimum Pressure Characteristics

R-*03-A -12 R-*03-A -12 R-*03-1-12
B B
0.20 {2.0} 2.0 {20.4}
Minimum pressure
Minimum pressure

2.5 {25.5}
MPa{kgf/cm }
MPa{kgf/cm }
MPa{kgf/cm }

2
2
2

2.3 {23.5}
Pressure

0.15 {1.5} 1.5 {15.3}

2.1 {21.4}
0.10 {1.0} 1.0 {10.2}
1.0 {10.2}
0.8 { 8.2}
0.05 {0.5} 0.5 { 5.1}
0.6 { 6.1}

0 10 20 30 0 10 20 30 40 0 20 40 60 80
Flow rate ℓ/min Flow rate ℓ/min Flow rate ℓ/min
R-*06-1-20 R-*10-1-20

2.0 {20.4} 2.0 {20.4}

Minimum pressure

Minimum pressure
MPa{kgf/cm }

MPa{kgf/cm }
2

1.5 {15.3} 1.5 {15.3}

1.0 {10.2} 1.0 {10.2}

0.5 { 5.1} 0.5 { 5.1}

0 50 100 150 200 0 100 200 300 400

Flow rate ℓ/min Flow rate ℓ/min

Note) The performance curves do not include T port back pressure.

F-3
 Cross-sectional Drawings
A R-G03-A -12
B

13 14 8 7 17 2 20 11 4 6 22 18 19 15

C X
16 Part No. Part Name
1 Body
3 P 2 Cover

E 21
3
4
Spool
Poppet
10 5 Seat
6 Seat
T
F
5 7 Plunger
8 Retainer
23 9 Collar
10 Spring
1
Pressure Control Valve

11 Spring

G
12 Spring
13 Handle
14 Nut
15 Spring pin
R-G03-1 -12 16 O-ring
3
H R-G
06 1
- -20
10 3
17
18
O-ring
O-ring
19 O-ring
20 Screw
13 14 8 7 17 11 4 2 20 6 9 22 21 Plug

I 22
23
Plug
Nameplate

Note) 
The No. 12 spring is not included when
16 auxiliary symbol H is selected (except with
the 03 size).
J 12

18

X
K 10

3
P

L
21
5
23
19

M T 15

N
Seal Part List
( Kit Model Number RRBS-*** (06, 10 size) )
RRS-*** (03 size)

O Part No. Part Name

Type/Part Number
Q'ty
R-G03-*-12 R-T03-*-12 R-G06-*-20 R-T06-*-20 R-G10-*-20 R-T10-*-20
16 O-ring NBR-90 G30 NBR-90 G30 NBR-90 G30 NBR-90 G30 NBR-90 G40 NBR-90 G40 1
17 O-ring NBR-70-1 P11 NBR-70-1 P11 NBR-70-1 P11 NBR-70-1 P11 NBR-70-1 P11 NBR-70-1 P11 1
18 O-ring NBR-90 P7 − NBR-90 P9 − NBR-90 P9 − 1
19 O-ring NBR-90 P20 − NBR-90 P26 − NBR-90 G35 − 2
Note) The materials and hardness of the O-ring conforms with JIS B2401.
*** in the kit number is used for specification of the valve size (G03, T06, etc.)

F-4