Iso 10628-2

INTERNATIONAL ISO
STANDARD 10628-2
First edition
2012-12-01
Diagrams for the chemical and

petrochemical industry —
Part 2:
Graphical symbols
Schémas de procédé pour l’industrie chimique et pétrochimique —
Partie 2: Symboles graphiques
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
Reference number
ISO 10628-2:2012(E)
Copyright International Organization for Standardization © ISO 2012

Provided by Accuris under license with DS-DANSK Licensee=Mumbai, London, KL/5944276114, User=Tabib, Tabib
No reproduction or networking permitted without license from Accuris Not for Resale, 12/27/2023 22:33:49 MST
ISO 10628-2:2012(E)
COPYRIGHT PROTECTED DOCUMENT

© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
Copyright International Organization for Standardization © ISO 2012 – All rights reserved
ISO 10628-2:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10628-2 was prepared by Technical Committee ISO/TC 10, Technical product documentation, Subcommittee
SC 10, Process plant documentation.
This first edition of ISO 10628-2, along with ISO 10628-1 (under preparation), cancels and replaces
ISO 10628:1997, which has been technically revised.
ISO 10628 consists of the following parts, under the general title Diagrams for the chemical and
petrochemical industry:
— Part 2: Graphical symbols
The following part is under preparation:
— Part 1: Specification of diagrams

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
Copyright International Organization for Standardization © ISO 2012 – All rights reserved iii
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
Copyright International Organization for Standardization

INTERNATIONAL STANDARD ISO 10628-2:2012(E)
Diagrams for the chemical and petrochemical industry —
Part 2:
Graphical symbols
1 Scope
This part of ISO 10628 defines graphical symbols for the preparation of diagrams for the chemical and
petrochemical industry. It is a collective application standard of the ISO 14617 series.
This part of ISO 10628 does not apply to graphical symbols for electrotechnical diagrams; for these, see IEC 60617.
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 10209, Technical product documentation — Vocabulary — Terms relating to technical drawings, product
definition and related documentation
ISO 14617 (all parts), Graphical symbols for diagrams
ISO 15519-1, Specification for diagrams for process industry — Part 1: General rules
ISO 81714 (all parts), Design of graphical symbols for use in the technical documentation of products
IEC 81714 (all parts), Design of graphical symbols for use in the technical documentation of products
3 Terms and definitions

For the purposes of this document, the definitions given in the ISO 14617 series and ISO 10209 apply.
4 Structure of graphical symbols

The graphical symbols are grouped according to functional and/or design features. See Table 1.
Table 1 — Subject groups
Group number Subject group

1 Vessels and tanks
2 Columns with internals
3 Heat exchangers
4 Steam generators, furnaces, recooling device
5 Cooling tower
6 Filters, liquid filters, gas filters
7 Screening devices, sieves and rakes
8 Separators
9 Centrifuges
10 Drier
Copyright International Organization for Standardization © ISO 2012 – All rights reserved 1
ISO 10628-2:2012(E)
Table 1 (continued)
Group number Subject group

11 Crushing/Grinding machines
12 Mixers/Kneaders
13 Shaping machines – processing in vertical direction
14 Shaping machines – processing in horizontal direction
15 Liquid pumps
16 Compressors, vacuum pumps
17 Blowers, fans
18 Lifting, conveying and transport equipment
19 Proportioners, feeders and distribution facilities
20 Engines
21 Valves
22 Check valves
23 Valves and fittings with safety function
24 Fittings
25 Graphical symbols for piping
26 Apparatus elements
27 Internals
28 Agitators, stirrers
29 Internal characteristics and built-in-components
5 Graphical symbols
Graphical symbols for diagrams used in chemical and petrochemical industry are presented in Table 2, which
is is divided into four columns, as follows:
1 Item no. Consecutive numbering within each subject group according to Table 1
2 Reg. no. Registration numbers structured as follows:
nnn Registration number for ISO 14617 graphical symbols.
Cnnnn Preliminary registration number for a new graphical

symbol, which will be implemented in ISO 14617. The
preliminary registration number will be replaced with the
final ISO 14617 registration number at first periodical review
of ISO 10628-2.
X2nnn Registration number for ISO 14617 symbol examples.
X8nnn Registration number for ISO 10628-2 symbol examples.
3 Graphical symbol Graphical symbols shown with a 2,5 mm dotted grid behind. Preferred
locations of connections at graphical symbols are indicated by “—”. This
is not a part of the graphical symbol.
4 Description The preferred descriptors for the graphical symbol.
Rules for modification of proportions and orientation of graphical symbols are given in ISO 81714 and IEC 81714.
If a graphical symbol is not accessible in ISO 10628-2, then ISO 14617 should be consulted for the needed
graphical symbol.
2
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
ISO 10628-2:2012(E)
If the needed graphical symbol is not available in ISO 14617, then the symbol shall be created by combining
ISO 14617 symbols of basic nature with symbols given supplementary information according to rules given in
ISO 14617, ISO 81714 and IEC 81714.
Table 2 — Graphical symbols for diagrams
Item no. Reg. no. Graphical symbol Description

1 VESSELS AND TANKS
1.1 301 Tank, vessel
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
1.2 2061 Container, tank, cistern
1.3 X2063 Tank with conical roof and flat bottom
1.4 X8200 Tank with dished roof
1.5 2062 Tank, vessel with dished ends
© ISO 2012 – All rights reserved

Copyright International Organization for Standardization 3
ISO 10628-2:2012(E)
Table 2 (continued)

1.6 X8201 Vessel with two different diameters
1.7 2063 Spherical vessel
1.8 2064 Bunker with conical bottom
1.9 X2062 Closed tank with conical bottom
1.10 X8008 Vessel with dished roof and conical

bottom
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
4
ISO 10628-2:2012(E)
Table 2 (continued)

1.11 X8009 Vessel with conical roof and bottom
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
1.12 C0001 Container for solids, liquids, gases
1.13 2067 Barrel, drum
1.14 C0002 Gas cylinder
1.15 2068 Bag
1.16 X8002 Vessel with dished ends and support

legs

brackets

ISO 10628-2:2012(E)
Table 2 (continued)

skirt

ring
1.20 X2069 Vessel with dished ends and heating/

cooling jacket
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
1.21 X2070 Vessel with dished ends and electrical

heating
6
ISO 10628-2:2012(E)
Table 2 (continued)

1.22 X8098 Vessel with dished ends and thermal
insulation
1.23 X8007 Vessel with dished bottom and

surface indication
1.24 X8010 Spherical vessel on legs
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
1.25 X8000 Vessel with full-tube heating/cooling
coil

ISO 10628-2:2012(E)
Table 2 (continued)

1.26 X8001 Vessel with semi-tube heating/cooling
coil
1.27 X8006 Jacketed vessel with dished ends and

agitator driven by electric motor
1.28 X8202 Vessel with pit
1.29 2065 Open bulk storage
2 Columns with internals

2.1 X8100 Column (general)
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
8
ISO 10628-2:2012(E)
Table 2 (continued)

2.2 X8101 Tray column (general)
2.3 X8014 Column with fluidized bed
2.4 X8015 Column with fixed bed
2.5 X8013 Column with staggered baffle trays

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
9
ISO 10628-2:2012(E)
Table 2 (continued)

2.6 X8011 Column with bubble cap trays
2.7 X8012 Column with valve trays

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
2.8 X8016 Column with two fixed bed sections

and intermediate spray nozzle
3 HEAT EXCHANGERS
3.1 X8079 Heat exchanger (general), condenser
10
ISO 10628-2:2012(E)
Table 2 (continued)

3.2 X8017 Heat exchanger (M-shape)
3.3 2511 Heat exchanger with straight tubes

(fixed-tube plates)
3.4 2512 Heat exchanger of floating head type
3.5 2513 Heat exchanger with U-shaped tubes
3.6 2516 Heat exchanger of plate type
3.7 2514 Heat exchanger with coil shaped

tubes
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
ISO 10628-2:2012(E)
Table 2 (continued)

3.8 2515 Heat exchanger of double-pipe type
3.9 X8018 Heat exchanger with finned tube
3.10 X2505 Heat exchanger with finned tube and

fan
3.11 2517 Heat exchanger of spiral type
3.12 X8131 Evaporator, re-boiler
3.13 X8132 Electric heater
3.14 X8133 Thin-film evaporator
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
12
ISO 10628-2:2012(E)
Table 2 (continued)

3.15 X8136 Tube bundle, heat exchanger with
U-shaped tubes
3.16 X8137 Tube bundle, heat exchanger of

floating head type
4 STEAM GENERATORS, FURNACES, RECOOLING DEVICE

4.1 2532 Boiler with dome
4.2 X8103 Steam generator with hot liquid as

generating media
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
4.3 2533 Furnace
4.4 X8107 Firing system, burner (general)

ISO 10628-2:2012(E)
Table 2 (continued)

4.5 X8106 Combustion chamber
4.6 X8108 Vessel with dome
4.7 2041 Stack, chimney
4.8 2591 Gas flare
5 COOLING TOWER
5.1 2521 Cooling tower (general)
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
14
ISO 10628-2:2012(E)
Table 2 (continued)

5.2 X8109 Cooling tower, dry with natural
draught
5.3 X8110 Cooling tower, dry with forced draught
5.4 X8111 Cooling tower, dry with induced

draught
5.5 X8112 Cooling tower, wet with natural

draught
5.6 X8113 Cooling tower, wet with forced draught
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---

ISO 10628-2:2012(E)
Table 2 (continued)

5.7 X8114 Cooling tower, wet with induced
draught
5.8 X8115 Cooling tower, wet–dry with natural

draught
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
5.9 X2504 Spray cooler
6 FILTERS, LIQUID FILTERS, GAS FILTERS

6.1 X8116 Liquid filter (general)
6.2 X8117 Liquid filter, bag, candle or cartridge

type
16
ISO 10628-2:2012(E)
Table 2 (continued)

6.3 X8118 Liquid bed filter fixed type
6.4 X8019 Suction filter
6.5 X8119 Liquid rotary filter, drum or disc type
6.6 X8120 Liquid rotary filter, drum or disc type

with scraper
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---

ISO 10628-2:2012(E)
Table 2 (continued)

6.7 X8121 Liquid filter, belt or roll type
6.8 X2611 Filter press, press filter
6.9 X8020 Liquid bed filter, ion exchanger type
6.10 X8021 Liquid bed filter, biological type
6.11 X8122 Gas filter (general)

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
18
ISO 10628-2:2012(E)
Table 2 (continued)

6.12 X8022 Gas filter, bag, candle or cartridge
type
6.13 X8023 Gas bed filter fixed type
6.14 X8024 Gas filter, high efficiency particulate

air filter HEPA type
6.15 X8025 Gas filter, belt or roll type
19
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---

ISO 10628-2:2012(E)
Table 2 (continued)

7 SCREENING DEVICES, SIEVES AND RAKES
7.1 X8123 Screening device, sieve, strainer,
general
7.2 X8026 Screening device, coarse rake type
7.3 X8027 Screening device, fine rake type
7.4 X8028 Screening device with coarse and fine

screens
7.5 X2605 Screening device, sieve, strainer,

vibrating type
20
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
ISO 10628-2:2012(E)
Table 2 (continued)

7.6 X8029 Screening device, rotating drum type
7.7 X8030 Screening device, basket reel type

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
8 SEPARATORS
8.1 X8081 Separator, sifter (general)
8.2 X2616 Impact separator
8.3 X8031 Gravity separator, settling chamber
ISO 10628-2:2012(E)
Table 2 (continued)

8.4 X8124 Separator, scrubber wet type
8.5 X2621 Spray scrubber

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
8.6 X8125 Separator, precipitator electrostatic

type
8.7 X8033 Precipitator wet, electrostatic type
8.8 X8126 Electromagnetic separator
22
ISO 10628-2:2012(E)
Table 2 (continued)

8.9 X8127 Permanent magnet separator
8.10 X2618 Separator, cyclone type

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
8.11 X8034 Separator, scrubber venturi type
8.12 X8128 Solidifier for waste water treatment

plant open type
8.13 X8129 Solidifier closed type
ISO 10628-2:2012(E)
Table 2 (continued)

9 CENTRIFUGES
9.1 X2619 High speed centrifuge
9.2 X2614 Centrifuge with perforated shell
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
9.3 X8035 Centrifuge with solid shell
9.4 X8036 Centrifuge, separator disc-type
9.5 X8037 Centrifuge, screw-type with

perforated shell
24
ISO 10628-2:2012(E)
Table 2 (continued)

9.6 X8082 Decanter, centrifuge, screw type with
solid shell
9.7 X8038 Centrifuge, pusher type
9.8 X8039 Centrifuge, skimmer type
10 DRIER
10.1 C0046 Drier (general)
10.2 X8083 Drying oven, drying chamber, shelf

drier
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,
ISO 10628-2:2012(E)
Table 2 (continued)

10.3 X8040 Turbo drier, disc drier, moving shelf
drier
10.4 X8041 Fluidized bed drier
10.5 X8042 Spray drier
10.6 X8043 Belt drier, roller-conveyor type drier
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
26
ISO 10628-2:2012(E)
Table 2 (continued)

10.7 X8044 Rotary drum drier, rotary drier,
tumbling drier
10.8 C0016 Heat consumer
11 CRUSHING/GRINDING MACHINES
11.1 X8084 Crushing/grinding machine (general)
11.2 X8085 Crusher (general)
11.3 X8045 Crusher, hammer type
11.4 X8046 Crusher, impact type
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---

ISO 10628-2:2012(E)
Table 2 (continued)

11.5 X8047 Crusher, jaw type
11.6 X8048 Crusher, roller type
11.7 X8049 Crusher, cone type

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
11.8 X8086 Mill, pulverizer (general)
11.9 X8050 Mill, pulverizer hammer type
11.10 X8051 Mill, impact type
28
ISO 10628-2:2012(E)
Table 2 (continued)

11.11 X8053 Mill, horizontal rotation roller type
11.12 X8054 Mill, vibration type
12 MIXERS/KNEADERS
12.1 X2672 In-line rotary mixer
12.2 X2673 In-line static mixer
12.3 X8184 Mixing path
12.4 X8134 Kneader
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---

ISO 10628-2:2012(E)
Table 2 (continued)

13 SHAPING MACHINES — PROCESSING IN VERTICAL DIRECTION
13.1 C0052 Shaping machine, vertical type
(general)
13.2 X8055 Press, roller type
13.3 X8056 Press, piston type

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
13.4 X8057 Pelletizing disc
14 SHAPING MACHINES — PROCESSING IN HORIZONTAL DIRECTION

14.1 C0053 Shaping machine, horizontal type
(general)
14.2 X8058 Extruder, screw type
30
ISO 10628-2:2012(E)
Table 2 (continued)

14.3 X8059 Extruder, piston type
15 LIQUID PUMPS
15.1 2301 Pump, liquid type (general)
15.2 2322 Pump, centrifugal type
15.3 X8091 Pump, gear type
15.4 X8092 Pump, screw type
15.5 X8093 Pump, progressive cavity type
15.6 X8094 Pump, reciprocating piston type

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
15.7 X8095 Pump, diaphragm type
15.8 X8096 Jet pump, liquid type

ejector pump
ISO 10628-2:2012(E)
Table 2 (continued)

16 COMPRESSORS, VACUUM PUMPS
16.1 2302 Compressor, vacuum pump (general)
16.2 X8179 Compressor, centrifugal type
16.3 X8097 Compressor, vacuum pump,

reciprocating piston type
16.4 X8099 Compressor, vacuum pump

diaphragm type
16.5 X8102 Compressor, vacuum pump, turbo

type
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
16.6 X8104 Compressor, vacuum pump, roller

vane type, compressor
16.7 X8105 Compressor rotary type, vacuum

pump, rotary piston type
16.8 X8161 Compressor, screw type
16.9 X8162 Compressor, vacuum pump liquid ring

type
32
ISO 10628-2:2012(E)
Table 2 (continued)

16.10 X8163 Compressor, ejector type, vacuum
pump jet type
17 BLOWERS, FANS
17.1 X8164 Blower, fan (general)
18 LIFTING, CONVEYING AND TRANSPORT EQUIPMENT

18.1 X8060 Conveyor (general)
18.2 3821 Conveyor, belt type
18.3 X8061 Conveyor, belt type in box
18.4 X8062 Conveyor, chain type, closed

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
18.5 X8063 Conveyor, screw type, closed
ISO 10628-2:2012(E)
Table 2 (continued)

18.6 X8064 Conveyor, vibrating type, closed
18.7 X8065 Elevator, bucket type
18.8 X8066 Elevator, bucket type Z-form
18.9 X8175 Conveyor, belt type, reversible
18.10 3841 Crane
18.11 3842 Lift
18.12 C0094 Forklift, manually operated
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
34
ISO 10628-2:2012(E)
Table 2 (continued)

18.13 3862 Forklift truck
18.14 3871 Industrial truck (general)
18.15 3874 Tank car, tank wagon

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
18.16 3872 Box truck
18.17 3881 Ship
18.18 X8142 Roller conveyor
18.19 X8143 Loading arm
18.20 X8145 Palletizer
18.21 X8146 Bag filling machine
ISO 10628-2:2012(E)
Table 2 (continued)

18.22 X8144 Protective palette covering
19 PROPORTIONERS, FEEDERS AND DISTRIBUTION FACILITIES

19.1 C2056 Proportional feeder (general)
19.2 X8067 Proportional feeder, rotary valve type
19.3 C0074 Feeder, rotary table type
19.4 C0035 Proportional feeder, metering type
19.5 2037 Spray nozzle
20 ENGINES
20.1 2571 Turbine (general)
20.2 X8167 Gear
36
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
ISO 10628-2:2012(E)
Table 2 (continued)

20.3 C0079 Generator (general)
20.4 X8154 Generator, AC
20.5 X8155 Generator, DC
20.6 C0082 Electric motor (general)

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
20.7 X8157 Electric motor, AC
20.8 X8158 Electric motor, DC
21 VALVE
21.1 2101 Valve (general)
ISO 10628-2:2012(E)
Table 2 (continued)

21.2 2102 Valve, angle type (general)
21.3 2103 Valve, three way type (general)
21.4 X8068 Valve, globe type
21.5 X8069 Valve, angle globe type
21.6 X8070 Valve, three way globe type
21.7 X8071 Valve, ball type
21.8 X8072 Valve, angle ball type

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
21.9 X8073 Valve, three way ball type
21.10 X8074 Valve, gate type
21.11 X8075 Valve, butterfly type (Form 1)
21.12 X8075 Valve, butterfly type (Form 2)
21.13 X8076 Valve, needle type
38
ISO 10628-2:2012(E)
Table 2 (continued)

21.14 X8087 Valve, control type, continuously
operated
22 CHECK VALVE
22.1 X8077 Check valve (general)
22.2 X2113 Check valve globe type
22.3 X8078 Swing check valve (Form 1)
22.4 X8165 Swing check valve (Form 2)
23 VALVES AND FITTINGS WITH SAFETY FUNCTION

23.1 X2124 Safety valve, spring loaded, globe
type
23.2 X2125 Safety valve, spring loaded, globe

angle type
23.3 X8080 Rupture disc
23.4 2036 Flame arrestor
23.5 C0087 Flame arrestor explosion-proof

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
23.6 C0088 Flame arrestor detonation-proof
23.7 C0091 Flame arrestor fire-resistant
ISO 10628-2:2012(E)
Table 2 (continued)

23.8 C0089 Fire-resistant and detonation-proof
flame arrestor out to the atmosphere
23.9 X8088 Breather valve
24 FITTINGS
24.1 2034 Viewing glass
24.2 X8089 Viewing glass with lighting
24.3 2033 Silencer
24.4 C0093 Mixing nozzle, injector
24.5 533 Compensator
24.6 X8090 Strainer
24.7 X8150 Cone type strainer
24.8 C0096 Orifice plate
24.9 C0097 Blind disc
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
40
ISO 10628-2:2012(E)
Table 2 (continued)

24.10 C0098 Open disc
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
24.11 2044 Interchangeable disc (blind disc)
24.12 2045 Interchangeable disc (open disc in

function)
24.13 2039 Vent (outlet to the atmosphere for

steam/gas)
24.14 2040 Funnel
24.15 2181 Self-operating release valve (steam

trap)
24.16 511 Flanged connection
24.17 516 Reducer
24.18 X411 Hose
24.19 C0100 Coupling
24.20 513 Clamped flange coupling

ISO 10628-2:2012(E)
Table 2 (continued)

24.21 C0108 Breakthrough
24.22 517 Flanged dummy cover
24.23 X8152 Single flange
24.24 X8153 Dummy cover

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
25 GRAPHICAL SYMBOLS FOR PIPING

25.1 405 Pipeline
25.2 X8156 Secondary pipeline
25.3 241 Flowmotion in direction of arrow
25.4 3061 Slope
25.5 2038 Siphon
25.6 C0106 Tracer for heating or cooling
25.7 X409 Jacketed pipeline
25.8 X8174 Piping, heated or cooled and

insulated
25.9 X322 Pipeline with thermal insulation
26 APPARATUS ELEMENTS
26.1 C2005 Support leg
26.2 C2006 Support bracket
26.3 C2007 Support skirt
42
ISO 10628-2:2012(E)
Table 2 (continued)

26.4 C2008 Support ring
26.5 X8159 Manhole
26.6 X8160 Socket, connection nozzle
27 INTERNALS
27.1 C2044 Tray (general)
27.2 X8166 Tray with baffle
27.3 C2010 Tray, bubble-cap type
27.4 C2011 Tray, valve type
27.5 2602 Sieve tray, screen or sieve element
27.6 C2047 Filter insert (general)
27.7 2604 Fluidized bed
27.8 X8141 packing
28 AGITATORS, STIRRERS
28.1 2672 Agitator (general), stirrer
(general)
28.2 C2019 Agitator, flate-blade paddle type
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---

ISO 10628-2:2012(E)
Table 2 (continued)

28.3 C2020 Agitator, gat paddle type
28.4 C2021 Agitator, cross-beam type
28.5 C2022 Agitator, anchor type
28.6 C2023 Agitator, helical type
28.7 C2024 Agitator, impeller type
28.8 C2025 Agitator, propeller type
28.9 C2026 Agitator, disc type

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
44
ISO 10628-2:2012(E)
Table 2 (continued)

28.10 C2027 Agitator, turbine type
29 INTERNAL CHARACTERISTICS AND BUILT-IN COMPONENTS

29.1 C2028 Gravity type, settling type
29.2 C2030 Electrostatic type
29.3 C2031 Electromagnetic type
29.4 C2033 Disc type
29.5 C0240 Crushing
29.6 C024 Gear type, gearwheels type
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
29.7 C2034 Hammer type
29.8 C2035 Impact type
29.9 C2036 Jaw type
29.10 321 Liquid type, wet type
29.11 C2037 Roller type
29.12 C2038 Cone type

ISO 10628-2:2012(E)
Table 2 (continued)

29.13 X8176 Jet type
29.14 3831 Vibration type

--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
46
ISO 10628-2:2012(E)
Annex A
(informative)
Index
A Closed type 23
Coarse and fine screens 20
AC 37 Coarse rake type 20
Agitator 8, 43, 44, 45 Coil shaped tubes 11
Air filter 19 Column 1, 8, 9, 10
Anchor type 44 Combustion chamber 14
Angle ball type 38 Compensator 40
Angle globe type 38 Compressor 2, 32, 33
Angle type 38 Condenser 10
Apparatus elements 2, 42 Cone type 45
Cone type crusher 28
B Cone type strainer 40
Conical bottom 4, 5
Baffle 43
Conical roof 3, 5
Bag 5, 16, 19
Connection nozzle 43
Bag filling machine 35
Container 3, 5
Ball type 38
Control type 39
Barrel 5
Conveying 2, 33
Basket reel type 21
Conveyor 33, 34
Belt drier 26
Cooling tower 2, 19, 20
Belt type 18, 19, 33, 34
Coupling 56
Biological type 18
Crane 45
Blind disc 40, 41
Cross-beam type 44
Blowers 2, 33
Crusher 27, 28
Boiler 13
Crushing 2, 27, 45
Bottom 3, 4, 5
Cyclone type 23
Box 35
Box truck 35 D
Breakthrough 42
Breather valve 40 DC 37
Bubble-cap 10, 43 Decanter 25
Bucket type 34 Detonation-proof 39, 40
Built-in-components 2, 45 Diaphragm type 31, 32
Bundle 13 Disc drier 26
Bunker 4 Disc type 17, 44, 45
Burner 13 Dished bottom 7
Butterfly type 38 Dished ends 3, 5, 6, 7, 8
Dished roof 3, 4
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
C Distribution facilities 2, 36
Dome 13, 14
Candle 16, 19
Double-pipe type 12
Car 35
Drier 1, 25, 26
Cartridge 16, 19
Drum 5, 17
Centrifugal type 31, 32
Dry cooling 15
Centrifuge 1, 24, 25
Drying chamber 25
Chain type 33
Drying oven 25
Check valve 2, 39
Dry forced draught 15
Chimney 14
Dry induced draught 15
Cistern 3
Dry natural draught 15
Clamped flange coupling 41
Dummy cover 42
Closed tank 4

ISO 10628-2:2012(E)
E Gearwheels type 45
Generating media 13
Evaporator 12 Generator 37
Ejector pump 31 Global angle type 39
Ejector type 33 Global type 38, 39
Electric heater 6, 12 Gravity separator 21
Electric motor 8, 37 Gravity type 45
Electrical heating 6 Grinding machine 2, 27
Electromagnetic 22, 45
Electrostatic type 22, 45 H
Elevator 34
Engines 2, 36 Hammer type 27, 28, 45
Explosion-proof 39 Heat consumer 27
Extruder 30, 31 Heat exchanger 2, 10, 11, 12, 13
Heating/cooling coil 7, 8
F Heating/cooling jacket 6
Helical type 44
Fan 2, 12, 33 HEPA type 19
Feeder 2, 36 Horizontal type 30
Filter 1, 16, 17, 18 Hose 41
Filter insert 43
Filter press 18 I
Fine rake type 20
Finned tube 12 Impact separator 21
Fire-resistant 39, 40 Impact type 27, 28, 45
Firing system 13 Impeller type 44
Fittings 2, 40 Industrial truck 35
Fixed bed 9 Injector 40
Fixed bed sections 10 In-line rotary mixer 29
Fixed-tube plates 11 In-line static mixer 29
Fixed type 19 Insulated 42
Flame arrestor 39, 40 Interchangeable disc 41
Flanged connection 41 Intermediate spray nozzle 10
Flanged dummy cover 42 Internals 2, 43
Flate-blade paddle type 43 Ion exchanger type 18
Floating head type 11, 13
Flowmotion 42 J
Fluidized bed 9, 43
Jacketed pipeline 42
Fluidized bed drier 26
Jacketed vessel 8
Forklift truck 35
Jaw type 28, 45
Forklift 34
Jet pump 31
Funnel 41
Jet type 33, 46
Furnace 1, 13
K
G
Kneader 2, 29
Gas 5, 14, 19
Gas bed filter 19
Gas cylinder 5
Gas filter 1, 18, 19
Gas flare 14
Gat paddle type 44
Gate type 38
Gear 36
Gear type 31, 45
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
48
ISO 10628-2:2012(E)
L Proportional feeder 36
Proportioners 2, 36
Legs 7 Protective palette covering 36
Lifting 2, 33 Pulverizer 28
Lift 34 Pump 31
Lighting 40 Pusher type 25
Liquid bed filter 17, 18
Liquid filter 1, 16, 17, 18 R
Liquid pumps 2, 31
Liquid rotary filter 17 Rakes 1, 20
Liquids 5, 13 Re-boiler 12
Liquid type 31, 45 Reciprocating piston type 31, 32
Loading arm 35 Recooling device 1, 13
Reducer 41
M Reversible 34
Roll type 18, 19
Manhole 43 Roller type 28, 29, 30, 45
Metering type 36 Roller vane type 32, 36
Mill 28, 29 Roller conveyor 26, 35
Mixer 2, 29 Rotary drum drier 27
Mixing nozzle 40 Rotary drier 27
Mixing path 29 Rotary table type 36
Moving shelf drier 26 Rotary type 32
M-shape 11 Rotating drum type 21
Rupture disc 39
N
S
Natural draught 15, 16
Needle type 38 Safety function 2, 39
Safety valve 39
O Scraper 17
Screening device 1, 20, 21
Open bulk storage 8
Screw type 24, 30, 31, 32, 33
Open disc 41
Scrubber venturi type 23
Open type 23
Scrubber wet type 22
Orifice plate 40
Secondary pipeline 42
P Self-operating release valve 41
Semi-tube 8
Packing 43 Separator 1, 21, 22, 23, 24
Palletizer 35 Separator disc type 24
Pelletizing disc 30 Settling chamber 21
Perforated shell 24 Shaping machine 2, 30
Permanent magnet separator 23 Shelf drier 25
Pipeline 42 Ship 35
Piping 2, 42 Sieve 1, 20, 43
Piston type 30, 31, 32 Sifter 21
Pit 8 Silencer 40
Plate type 11 Single flange 42
Precipitator 22 Siphon 42
Press 30 Skimmer type 25
Press filter 18 Slope 42
Progressive cavity type 31 Socket 43
Propeller type 44 Solid shell 24, 25
Solidifier 23
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---

ISO 10628-2:2012(E)
Solids 5 U
Spherical vessel 4, 7
Spiral type 12 U-shaped tubes 11, 13
Spray cooler 16
Spray drier 26 V
Spray nozzle 36
Spray scrubber 22 Vacuum pump 2, 32, 33
Spring loaded 39 Valve 2, 37, 38, 39
Stack 14 Valve trays 10
Staggered baffle 9 Valve type 43
Steam 1, 13, 41 Vent 41
Steam generators 1, 13 Vertical type 30
Steam trap 41 Vessel 1, 3, 4, 5, 6, 7, 8, 14
Stirrer 2, 43
Vibrating type 20, 34
Straight tubes 11
Strainer 20, 40
Vibration type 29, 46
Suction filter 17 Viewing glass 40
Support bracket 5, 42 Viewing glass with lighting 40
Support leg 5, 42
Support ring 5, 43 W
Support skirt 6, 42
Wagon 35
Surface indication 7
Waste water treatment plant 23
Swing check valve 39
Wet-dry natural draught 16
T Wet forced draught 15
Wet induced draught 16
Tank 1, 3, 4 Wet natural draught 15
Tank car 35 Wet type 45
Tank wagon 35
Thermal insulation 7, 42 Z
Thin-film evaporator 12
Z-form 34
Three-way ball type 38
Three-way globe type 38
Three-way type 38
Tower 14, 15, 16
Tracer 42
Transport equipment 2, 33
Tray 9, 10, 43
Tray column 9
Tube bundle 13
Tumbling drier 27
Turbine 36
Turbine type 45
Turbo drier 26
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
Turbo type 32
50
ISO 10628-2:2012(E)
Bibliography
[1] IEC 62424, Representation of process control engineering — Requests in P&I diagrams and data
exchange between P&ID tools and PCE-CAE tools
[2] IEC 60617 (all parts), Graphical symbols for diagrams
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---

ISO 10628-2:2012(E)
--`,``,,,,``,``,`,,``,,,````,,,`-`-`,,`,,`,`,,`---
ICS 01.080.30; 71.020.00; 75. 020.00

Price based on 51 pages


Iso 10628-2

Uploaded by

Copyright:

Available Formats

Iso 10628-2

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Iso 10628-2

Uploaded by

Copyright:

Available Formats

INTERNATIONAL ISO

Diagrams for the chemical and

Copyright International Organization for Standardization © ISO 2012

COPYRIGHT PROTECTED DOCUMENT

— Part 2: Graphical symbols

The following part is under preparation:

— Part 1: Specification of diagrams

Copyright International Organization for Standardization

Diagrams for the chemical and petrochemical industry —

ISO 14617 (all parts), Graphical symbols for diagrams

3 Terms and definitions

4 Structure of graphical symbols

Table 1 — Subject groups

Group number Subject group

Group number Subject group

2 Reg. no. Registration numbers structured as follows:

nnn Registration number for ISO 14617 graphical symbols.

Cnnnn Preliminary registration number for a new graphical

X2nnn Registration number for ISO 14617 symbol examples.

X8nnn Registration number for ISO 10628-2 symbol examples.

4 Description The preferred descriptors for the graphical symbol.

Table 2 — Graphical symbols for diagrams

Item no. Reg. no. Graphical symbol Description

1.3 X2063 Tank with conical roof and flat bottom

1.4 X8200 Tank with dished roof

1.5 2062 Tank, vessel with dished ends

© ISO 2012 – All rights reserved

Item no. Reg. no. Graphical symbol Description

1.7 2063 Spherical vessel

1.8 2064 Bunker with conical bottom

1.9 X2062 Closed tank with conical bottom

1.10 X8008 Vessel with dished roof and conical

Item no. Reg. no. Graphical symbol Description

1.13 2067 Barrel, drum

1.14 C0002 Gas cylinder

1.15 2068 Bag

1.16 X8002 Vessel with dished ends and support

1.17 X8003 Vessel with dished ends and support

© ISO 2012 – All rights reserved

Item no. Reg. no. Graphical symbol Description

1.19 X8005 Vessel with dished ends and support

1.20 X2069 Vessel with dished ends and heating/

1.21 X2070 Vessel with dished ends and electrical

Item no. Reg. no. Graphical symbol Description

1.23 X8007 Vessel with dished bottom and

1.24 X8010 Spherical vessel on legs

© ISO 2012 – All rights reserved

Item no. Reg. no. Graphical symbol Description

1.27 X8006 Jacketed vessel with dished ends and

1.28 X8202 Vessel with pit

1.29 2065 Open bulk storage

2 Columns with internals

Item no. Reg. no. Graphical symbol Description

2.3 X8014 Column with fluidized bed

2.4 X8015 Column with fixed bed

2.5 X8013 Column with staggered baffle trays

© ISO 2012 – All rights reserved

Item no. Reg. no. Graphical symbol Description

2.7 X8012 Column with valve trays

© ISO 2012 – All rights reserved

© ISO 2012 – All rights reserved

© ISO 2012 – All rights reserved

© ISO 2012 – All rights reserved

© ISO 2012 – All rights reserved

© ISO 2012 – All rights reserved

© ISO 2012 – All rights reserved

© ISO 2012 – All rights reserved