Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

RM001

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Peptone, Bacteriological RM001

Intended use
Peptone, Bacteriological confer nutritional benefit, especially at low dilution rates, and is recommended to support good
growth of wide variety of microorganisms, for identification of bacteria by performing various biochemical tests. It can
also be used for commercial production of enzymes, vaccines, antibiotics, steroids and other products.

Warning and Precautions


Read the label before opening the container. Wear protective gloves/protective clothing/eye protection/ face protection.
Follow good microbiological lab practices while handling specimens and culture. Safety guidelines may be referred in
individual safety data sheets.

Limitations
1.It is biological origin product since variation in colour of powder and clarity may observed.
2.Each lot of the product has been tested for the organisms specified on the COA. It is recommended to users to validate
the medium for any specific microorganism other than mentioned in the COA based on the user’s requirement.
3. Individual organisms differ in their growth requirement and may show variable growth patterns on the medium
prepared by the product.

Performance and Evaluation


Performance of the medium is expected when used as per the direction on the label within the expiry period when stored
at recommended temperature

Quality Control
Appearance : Light yellow to brownish yellow homogeneous free flowing powder characteristic odour but not
putrescent
Solubility : Freely soluble in distilled/purified water, insoluble in alcohol.
Clarity : 2% w/v aqueous solution remains clear and neutral without any haziness after autoclaving at 15 lbs
pressure (121ºC) for 15 minutes.
pH : pH of 2% w/v aqueous solution at 25ºC 6.1- 7.1
Microbial Load :
Bacterial Count : <= 2000 CFU/gram by plate method, when incubated at 30-35ºC for not less than 3 days
Yeast & mould Count : <= 100 CFU/gram by plate method, when incubated at 20-25ºC for not less than 5 days.
Test for pathogens : 1. Escherichia Coli- Absent/gram of sample 2. Salmonella species- Absent/10 gram of sample
3. Pseudomonas aeruginosa- Absent/gram of sample 4. Staphylococcus aureus- Absent/gram of sample 5. Candida
albicans - Absent/gram of sample 6. Clostridia - Absent/gram of sample

Indole test : Tryptophan content: Passes

. Page : 1 of 3
Please refer disclaimer Overleaf.
HiMedia Laboratories Technical Data

→ Cultural Response: Cultural response observed after incubation at 35 - 37°C for 18-48 hours by preparing Nutrient
Agar (M001), using Peptone Bacteriological as an ingredient.
.
Cultural Response

Organism Growth
Escherichia coli ATCC 25922 (WDCM00013) Luxuriant
Pseudomonas aeruginosa ATCC 27853 Luxuriant
(WDCM 00025)
Staphylococcus aureus subsp.aureus ATCC Luxuriant
25923(WDCM 00034)
Salmonella enterica subsp. enterica Typhi Luxuriant
ATCC 6539
Streptococcus pyogenes ATCC 19615 Luxuriant
Salmonella enterica subsp.enterica Enteritidis Luxuriant
ATCC 13076 (WDCM 00030)
Salmonella enterica subsp.enterica Luxuriant
Typhimurium ATCC 14028 (WDCM 00031)
Yersinia enterocolitica subsp. enterocolitica Luxuriant
ATCC 9610 (WDCM 00038)
Yersinia enterocolitica subsp. enterocolitica Luxuriant
ATCC 23715 (WDCM 00160)
Chemical Analysis :
Total Nitrogen : ≥13.50 %
Amino Nitrogen : ≥2.70 %
Sodium Chloride : ≤5.00 %
Loss on drying : ≤7.00 %
Residue on Ignition : ≤15.00 %
Storage and Shelf Life
Store between 10 - 30°C in tightly closed container and away from bright light. Use before expiry date on label. On
opening, product should be properly stored in dry ventilated area protected from extremes of temperature and sources
Seal the container tightly after use.

Disposal
User must ensure safe disposal by autoclaving and/or incineration of used or unusable preparations of this product.
Follow established laboratory procedures in disposing of infectious materials and material that comes into contact with
clinical sample must be decontaminated and disposed of in accordance with current laboratory techniques.

. Page : 2 of 3
Please refer disclaimer Overleaf.
HiMedia Laboratories Technical Data

Storage temperature Do not use if package is damaged

.
HiMedia Laboratories Pvt Limited
C-40,21/Y, MIDC, Wagle Ind Area
Thane(W)–400604,Maharashtra,India

Revision : 10/2022
Disclaimer :
User must ensure suitability of the product(s) in their application prior to use. Products conform solely to the information contained in
this and other related HiMedia™ publications.The information contained in this publication is based on our research and development
work and is to the best of our knowledge true and accurate. HiMedia™ Laboratories Pvt Ltd reserves the right to make changes to
specifications and information related to the products at any time. Products are not intended for human or animal or therapeutic use but
for laboratory,diagnostic, research or further manufacturing use only, unless otherwise specified.Statements contained herein should
not be considered as a warranty of any kind, expressed or implied, and no liability is accepted for infringement of any patents.

.HiMedia Laboratories Pvt. Ltd. Reg.Office : Plot No:C-40, Road No: 21Y, MIDC,Wagle Industrial Page : 3 of 3
Area,Thane(West)-400604,Maharashtra,INDIA.
Tel:00-91-22-61471919/61169797/69034800,Fax:00-91-22-61471920.
Email : techhelp@himedialabs.com Website : www.himedialabs.com

You might also like