A1103

Unipolar Hall-Effect Digital Switch

Features and Benefits Application Examples

– 4.5V to 24V Operation  Automotive, Consumer and Industrial
– -40℃ to 150℃ Superior temperature operation  Solid-state switch
– Bipolar technology  Brushless DC motor commutation
– Open-collector 25 mA output  Speed detection
– Reverse battery protection  Linear position detection
– Small Size-SOT23 3L or SIP 3L  Angular position detection
– Solid-state reliability  Proximity detection
– Resistant to physical stress
– Activate with small, commercially available
Permanent magnets

3 pin SOT23 (suffix SO) 3 pin SIP (suffix UA)

www.DataSheet.net/

Functional Block Diagram

VDD

Voltage
Regulatr OUT

Chopper

Hall
Plate

GND
SIP Package SOT Package
Pin 1 – V DD Pin 1 – V DD
Pin 2 – GND Pin 2 – OUT
Pin 3 – OUT Pin 3 – GND

1 V1.10 May 1, 2011

Datasheet pdf - http://www.DataSheet4U.co.kr/

 A1103
Unipolar Hall-Effect Digital Switch

General Descriptions
The A1103 is a unipolar Hall-effect sensor IC fabricated more stable with both temperature and supply voltage
from bipolar technology. The device integrates a voltage changes. The unipolar switching characteristic makes these
regulator, reverse battery protection diode, Hall sensor with devices ideal for use with a simple bar or rod magnet.
dynamic offset cancellation system, temperature
compensation circuitry, small signal amplifier, Schmitt Thanks to its wide operating voltage range and extended
trigger and an open-collector output to sink up to 25 mA. choice of temperature range, it is quite suitable for use in
With suitable output pull up, they can be used with bipolar automotive, industrial and consumer applications.
or CMOS logic circuits.
The device is delivered in a Small Outline Transistor (SOT)
These Hall-effect switches are monolithic integrated circuits or in a Plastic Single In Line (SIP 3L flat). Both 3-lead
with tighter magnetic specifications, designed to operate packages are RoHS compliant.
continuously over extended temperatures to +150℃,and are

Glossary of Terms
MilliTesla (mT), Gauss Units of magnetic flux density: 1mT = 10 Gauss

RoHS Restriction of Hazardous Substances

Operating Point (B OP ) Magnetic flux density applied on the branded side of the package which turns the output

driver ON (V OUT = V DSon )

Release Point (B RP ) Magnetic flux density applied on the branded side of the package which turns the output

driver OFF (V OUT = high)

www.DataSheet.net/

2 V1.10 May 1, 2011

Datasheet pdf - http://www.DataSheet4U.co.kr/

 A1103
Unipolar Hall-Effect Digital Switch

Pin Definitions and Descriptions

SOT Pin № SIP Pin № Name Type Function

1 1 VDD Supply Supply Voltage pin

2 3 OUT Output Open Drain Output pin

3 2 GND Ground Ground pin

Absolute Maximum Ratings

Parameter Symbol Value www.DataSheet.net/ Units

Supply Voltage VDD 28 V

Supply Current IDD 50 mA

Output Voltage VOUT 28 V

Output Current IOUT 50 mA

Storage Temperature Range TS -65 to 170 °C

Absolute maximum ratings

Operating Temperature Range Symbol Value Units

Temperature Suffix “E” TA -40 to 85 °C

Temperature Suffix “K” TA -40 to 125 °C

Temperature Suffix “L” TA -40 to 150 °C

Exceeding the absolute maximum ratings may cause permanent damage. Exposure to absolute-maximum- rated conditions for
extended periods may affect device reliability

3 V1.10 May 1, 2011

Datasheet pdf - http://www.DataSheet4U.co.kr/
 A1103
Unipolar Hall-Effect Digital Switch

General Electrical Specifications

DC Operating Parameters T A = 25℃, V DD = 4.5V to 24V (unless otherwise specified)

Parameter Symbol Test Conditions Min Typ Max Units

Supply Voltage VDD Operating 4.5 24 V

Supply Current IDD B < B RP 4 5 7 mA

Output Saturation Voltage VDSon IOUT = 20mA, B > B OP 0.3 0.5 V

Output Leakage Current IOFF B < B RP VOUT = 24V 0.1 10 µA

Output Rise Time tr RL = 820Ω, CL = 20pF 0.04 2.0 µs

Output Fall Time tf RL =820Ω, CL = 20pF 0.18 2.0 µs

Magnetic Specifications
DC Operating Parameters VDD = 4.5V to 24V (unless otherwise specified)

Parameter Symbol Test Conditions Min Typ Max Units

Operating Point B OP www.DataSheet.net/

150 170 190 G

Release Point B RP Ta=25℃,Vdd=12V DC 100 125 160 G

Hysteresis B HYS 45 G

Application Information

4 V1.10 May 1, 2011

Datasheet pdf - http://www.DataSheet4U.co.kr/
 A1103
Unipolar Hall-Effect Digital Switch

Package Information
Package UA, 3-Pin SIP:

www.DataSheet.net/

5 V1.10 May 1, 2011

Datasheet pdf - http://www.DataSheet4U.co.kr/
 A1103
Unipolar Hall-Effect Digital Switch

Package LH, 3-Pin SOT-23：

www.DataSheet.net/

Ordering Information

Part No. Pb-free Temperature Code Package Code Packing

A1103ESOT YES -40°C to 85°C SOT-23 7-in. reel, 3000 pieces/reel

A1103EUA YES -40°C to 85°C TO-92 Bulk, 1000 pieces/bag

A1103KSOT YES -40°C to 125°C SOT-23 7-in. reel, 3000 pieces/reel

A1103KUA YES -40°C to 125°C TO-92 Bulk, 1000 pieces/bag

A1103LSOT YES -40°C to 150°C SOT-23 7-in. reel, 3000 pieces/reel

A1103LUA YES -40°C to 150°C TO-92 Bulk, 1000 pieces/bag

6 V1.10 May 1, 2011

Datasheet pdf - http://www.DataSheet4U.co.kr/