Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 145 views

    Control Volumen Digital

    Uploaded by

    Daniel Carvajal Cortes
    The SC9153 is an electronic volume controller IC that can attenuate audio signals from 0dB to -66dB in steps. It has low power consumption and can operate from a single or dual power supply. The IC controls attenuation by using an on-chip oscillator and up/down terminals to adjust the signal level in the integrated attenuators in steps down to -66dB.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Control Volumen Digital

    Uploaded by

    Daniel Carvajal Cortes
    145 views9 pages
    The SC9153 is an electronic volume controller IC that can attenuate audio signals from 0dB to -66dB in steps. It has low power consumption and can operate from a single or dual power supply. The IC controls attenuation by using an on-chip oscillator and up/down terminals to adjust the signal level in the integrated attenuators in steps down to -66dB.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The SC9153 is an electronic volume controller IC that can attenuate audio signals from 0dB to -66dB in steps. It has low power consumption and can operate from a single or dual power supply. The IC controls attenuation by using an on-chip oscillator and up/down terminals to adjust the signal level in the integrated attenuators in steps down to -66dB.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    145 views9 pages

    Control Volumen Digital

    Uploaded by

    Daniel Carvajal Cortes
    The SC9153 is an electronic volume controller IC that can attenuate audio signals from 0dB to -66dB in steps. It has low power consumption and can operate from a single or dual power supply. The IC controls attenuation by using an on-chip oscillator and up/down terminals to adjust the signal level in the integrated attenuators in steps down to -66dB.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 9

    SC9153

    2-CH ELECTRONIC VOLUME CONTROLLER


    DESCRIPTION
    The SC9153 is CMOS IC which has been designed for electronization volume control of audio equipment,etc.

    FEATURES
    * Wide operating voltage range(VDD=6V ~ 12V) * Low current comsumption. * Attenuation can be controlled from 0dB to 66dB by 2dB/step * Both of dual power suppliers of (+) and (-) and a single power supply can be used. * Be capable of controlling attenuation by means of the built-in oscillator and the up/down terminals.
    DIP-16-300-2.54

    ORDERING INFORMATION
    Device SC9153 Package DIP-16-300-2.54

    BLOCK DIAGRAM
    VDD VSS

    16
    INT

    1
    INT Auto Initialize Circuit

    U/D

    10

    U/D 7 Bits Bidirectional shift registor CK OSC

    U/D 6 Bits Bidirectional shift registor CK

    7 INH

    OSC

    Constant Current Circuit VDD CK CK

    8 DCO

    L-OUT1 L-IN1

    2 3
    A-SW A-SW A-SW A-SW A-SW A-SW A-SW

    15 R-OUT1
    A-SW A-SW A-SW A-SW A-SW A-SW A-SW

    14 R-IN1

    A-GND L-IN2

    4
    CK CK A-SW A-SW A-SW A-SW A-SW A-SW

    13 A-GND
    A-SW A-SW A-SW A-SW A-SW A-SW

    12 R-IN2

    L-OUT2

    11 R-OUT2

    HANGZHOU SILAN MICROELECTRONICS CO.,LTD


    Http: www.silan.com.cn

    Rev:2.2

    2007.05.10 Page 1 of 9

    SC9153

    ABSOLUTE MAXIMUM RATINGS


    Characteristics Supply Voltage(Pin 16) Input/Output Voltage Power Dissipation Operating Temperature Storage Temperature Symbol VDD VIN PD Topr Tstg Value 13.0 VSS-0.3V ~ VDD+0.3V 150 -30 ~ +75 -55 ~ +125 Unit V V mW C C

    ELECTRICAL CHARACTERISTICS(Tamb=25C,VDD=12.0V, VSS=0V, Unless otherwise specified)


    Characteristics Operating Supply Voltage Operating supply current Input Voltage Backup current Attenuator 1 (10dB/step) resistor Attenuator 2 (2dB/step) resistor Attenuator Error Maximum Input Amplitude Total Harmonic Distortion DCO output current Oscillation frequency Vin THD IDCO fOSC Biase VDD/2=6V ATT=-10dB, fin=1kHz, Vin=1.0Vp-p 1 step 70 5 0.005 100 Level H Level L Symbol VDD IDD VIH VIL IB RATT-1 RATT-2 INH,U/D VDD=4V,INH= L R-IN1(L-IN1) ~ A-GND R-IN2(L-IN2) ~ A-GND 25 10 50 20 0.8*VDD Vss-0.3 Test conditions Min. 6 Typ. 9 1 Max. 12 3 VDD+0.3 0.2*VDD 10 70 28 2 4.0 0.01 140 10 Unit V mA V A k k dB Vrms % A Hz

    PIN CONFIGURATION

    HANGZHOU SILAN MICROELECTRONICS CO.,LTD


    Http: www.silan.com.cn

    Rev:2.2

    2007.05.10 Page 2 of 9

    SC9153

    PIN CONFIGURATION
    Pin No. 2,15 3,14 4,13 5,12 Symbol L-OUT1, R-OUT1 L-IN1, R-IN1 A-GND L-IN2, R-IN2 L-OUT2, R-OUT2 Function 10dB/step attenuator outputs. A signal applied to IN is attenuated in 7 steps from 0dB to 60dB at 10dB/step. 10dB/step attenuator inputs Analog ground terminal 2dB/step attenuator inputs 2dB/step attenuator outputs. A signal applied to IN is attenuated in 5 steps from 0dB to 8dB at 2dB/step. Inhibit terminal. When this terminal is at level, all L 7 INH input/output cut off and the SC9153 is placed in the inhibit state. When at level, the SC9153 operates normally. H DC current output for displaying attenuation. Attenuation 0dB~ is divided into 13 steps and approx 100A/step is transmitted.
    0dB 1step=100 A

    Remark the right and left channel is symmetrical.

    6,11

    connect a resistor to Vss through this port.

    DCO
    13 steps

    ~ ~

    R,C connecting terminal or the oscillator. Up/down speed 9 OSC of attenuation is decided by the attenuation up/down control oscillator according to this time constant.

    Attenuation terminal for oscillator. When this terminal is at 10 U/D level, sound volume is increased synchronizing with H rise of the oscillator. Conversely, when this pin is at L level, sound volume is decreased.

    1 16

    VSS VDD

    (-) Power supply terminal (+) Power supply terminal

    HANGZHOU SILAN MICROELECTRONICS CO.,LTD


    Http: www.silan.com.cn

    Rev:2.2

    2007.05.10 Page 3 of 9

    SC9153
    DESCRIPTION OF OPERATION
    1. SETTING OF ATTENUATION On the SC9153, attenuation can be increased/decreased according to the stae of U/D terminal or H L level ) by actuating the build-in oscillator. The attenuation is automatically set at the -40dB positions when power is applied.

    When the UP key is pressed after power ON, the U/D terminal is place in the UP state at level, and the H oscillator is actuated. When the DOWN key is pressed, the U/D terminal is kept at level as long as the Down key is L pressed, and the oscillator is actuated in the down state and therefore, attenuation is decreased. Oscillation frequency is decided by Cx and Rx. Fosc=1/(0.7*Rx*Cx) (Hz) 2. ATTENUATION DISPLAY OUTPUT The SC9153 is provided with DC current output terminal for displaying attenuation. With 0dB ~ divided in to 13steps, current of approx 100A/step is transmitted. STEP 0 1 2 3 4 5 6 7 8 9 10 11 12 13 DCO 0 IDCO=100A30A 2 IDCO 3 IDCO 4 IDCO 5 IDCO 6 IDCO 7 IDCO 8 IDCO 9 IDCO 10 IDCO 11 IDCO 12 IDCO 13 IDCO ATTENUATION -64dB ~ -60dB ~ -62dB -54dB ~ -58dB -50dB ~ -52dB -44dB ~ -48dB -40dB ~ -42dB -34dB ~ -38dB -30dB ~ -32dB -24dB ~ -28dB -20dB ~ -22dB -14dB ~ -18dB -10dB ~ -12dB -4dB ~ -8dB 0dB ~ -2dB Rev:2.2 2007.05.10 Page 4 of 9
    Step 0 1 3 2 1 Step is about 100mV 30mV 4 5 6 12 8
    1k Vss

    (Rs>3Rx)

    REMARKS

    13 11 10 9 8 7 About 1.3V

    HANGZHOU SILAN MICROELECTRONICS CO.,LTD


    Http: www.silan.com.cn

    SC9153

    3. ATTENUATOR The attenuator unit consist of diffused resistors and analog switches. Attenuator-1 attenuates 0 ~ 60dB at 10dB/step while Attenuator-2 attenuates 2~8db at 2dB/step, a total of 0~ 66dB at 2dB/step.
    Buffer

    IN1

    0
    OUT1
    R1

    IN2
    R2

    0
    OUT2

    -10
    R1 R2

    -2 -4
    R2

    -20
    R1

    -30
    R1 R2

    -6 -8
    R2

    -40
    R1

    -50
    R1

    -
    Attenuator-2

    -60
    R1 A-GND

    Attenuator-1 R1=50k (typical) R2=20k (typical)

    If there is possibility for excessive voltage being to the attenuator, it is recommended to insert a protected diode as illustrated below.

    4. POWER SUPPLY DUAL POWER SUPPLY

    HANGZHOU SILAN MICROELECTRONICS CO.,LTD


    Http: www.silan.com.cn

    Rev:2.2

    2007.05.10 Page 5 of 9

    SC9153

    SINGLE POWER SUPPLY

    5. BACKUP WHEN POWER OFF On the SC9153, when the INH terminal is set at L level, all input/output terminal are shut off and current consumption is reduced to the minimum. The backup by means of a capacitor become possible in this condition. An example of application, when a backup capacitor is used, is shown right. If VDD-VSS drops below 4.0V, the backup becomes impossible. 6. INITIALIZATION WHEN POWER ON The SC9153 has the auto-initializating built-in for initialization at time of power ON. As the initializing system through detection of supply voltage level is adopted. if rise power supply is too fast, the initialization may not be fully effected.(No external initialization is necessary. )In addition for effective initialization, it is necessary that the INH terminal is raised simultaneously with supply voltage. Further, the initializating level is 40dB. It is recommended to rise supply voltage and the INH terminal as illustrated below. If the VDD-VSS drops below 4.0V, the auto-initializing function is actuated.
    T>1ms
    VDD-VSS or INH Terminal Voltage VDD-VSS=4.0V

    HANGZHOU SILAN MICROELECTRONICS CO.,LTD


    Http: www.silan.com.cn

    Rev:2.2

    2007.05.10 Page 6 of 9

    SC9153

    APPLICATION CIRCUIT (L-CH ONLY)

    680

    120k

    5.6k

    560k

    82k

    39k

    0.022

    4.7k

    0.068

    0.012

    SC9153

    Down

    2.2

    UP

    2.2

    HANGZHOU SILAN MICROELECTRONICS CO.,LTD


    Http: www.silan.com.cn

    Rev:2.2

    2007.05.10 Page 7 of 9

    2.2

    SC9153

    SC9153

    1.2k

    SC9153

    PACKAGE OUTLINE
    DIP-16-300-2.54 UNIT: mm

    6.350.25

    HANDLING MOS DEVICES:


    Electrostatic charges can exist in many things. All of our MOS devices are internally protected against electrostatic discharge but they can be damaged if the following precautions are not taken: Persons at a work bench should be earthed via a wrist strap. Equipment cases should be earthed. All tools used during assembly, including soldering tools and solder baths, must be earthed. MOS devices should be packed for dispatch in antistatic/conductive containers.

    HANGZHOU SILAN MICROELECTRONICS CO.,LTD


    Http: www.silan.com.cn

    3.00MIN

    4.36MAX

    7.62

    Rev:2.2

    2007.05.10 Page 8 of 9

    0.250.05

    SC9153

    ATTACHMENT

    Revision History Data 2000.12.31 2003.06.09 2006.11.07 2007.05.10 REV 1.0 2.0 2.1 2.2 Original SC9153Achange to SC9153 Modify the ELECTRICAL CHARACTERISTICS Modify the PIN DESCRIPTIONand FUNCTION DESCRIPTION Description Page

    HANGZHOU SILAN MICROELECTRONICS CO.,LTD


    Http: www.silan.com.cn

    Rev:2.2

    2007.05.10 Page 9 of 9

    You might also like