COURSE PLAN

Department: Electronics and Communication

Course Name & code: Network Analysis ECE - 2122
Electronics and Communication
RD
Semester & branch: III Semester Electronics in VLSI Design and
Technology
1. Dr. Dayananda Nayak
2. Dr. Vinoth
3. Dr. Om Prakash Kumar
Name of the faculty: 4. Prof . Nakul Shetty
5. Dr. Praveen Kumar

No of contact hours/week: L T P C
3 0 0 3

COURSE OUTCOMES (COS)

At the end of this course, the student should be able No. of t Program PSO
to: Contac Marks Outcomes BL
Hours (POs)

CO1 Apply mathematical techniques, such as loop 8 25 1 2

analysis, nodal analysis, and network theorems,
1,2,5,12
to analyze electrical networks and predict the
system response to different stimuli.
Apply the knowledge of initial and final 12 32 1 2,3
CO2 conditions in passive circuits to obtain the
transient and steady-state responses of RL, RC,
1,2,5,12
and RLC circuits, and demonstrate the ability to
solve complex problems related to passive
circuits.
CO3 Evaluate the response of an RC circuit to a 5 12 1 2
range of input signals, including step, pulse,
square, and ramp inputs, and analyze the effect 1,2,5,12
of different input signals on the behaviour of the
circuit.
CO4 Utilize Laplace transform techniques to find the 5 15 1 2
1,2,5,12
response of various electrical circuits.
CO5 Analyze two port networks to obtain their two 6 16 1 2
port parameters, driving point functions, and 1,2,5,12
transfer functions.
Total 36 100
 Page 1 of 5
MIT/GEN/F-01/R3
COURSE LEARNING OUTCOMES (CLOS)
At the end of this course, the No. of Program Learning BL
student should be able to: Contact Marks Outcomes(POs) Outcomes
Hours (LOs)

CLO1 Apply mathematical 8 25 2

techniques, such as loop
analysis, nodal analysis, and
network theorems, to analyze
electrical networks and 1,2,5,12 C1
predict the system response
to different
stimuli
Apply the knowledge of 12 32 2,3
CLO2 initial and final conditions in
passive circuits to obtain the
transient and steady state
responses of RL, RC, and 1,2,5,12 C3
RLC circuits, and
demonstrate the ability to
solve complex problems
related to passive circuits.
CLO3 Evaluate the response of an 5 12 C2 2
RC circuit to a range of input
signals, including step,
pulse, square, and ramp
1,2,5,12
inputs, and analyze the effect
of different input signals on
the behaviour of the circuit.

CLO4 Utilize Laplace transform 5 15 C2 2

techniques to find the
1,2,5,12
response of various electrical
circuits.
CLO5 Analyze two-port networks 6 16 C2 2
to obtain their two-port
parameters, driving point 1,2,5,12
functions, and transfer
functions.
Total 36 100

Page 2 of 5 MIT/GEN/F-01/R3
 Assessment Plan
IN – SEMESTER ASSESSMENTS
S. Assessment Assessment Time Typology of Questions Topics
No. Mode Method Duration Marks Weightage (Recommended) Schedule Covered

Bloom’s taxonomy (B)

MISAC 1 Quiz/MCQs 20 Mins 5 10 MCQs × ½ = 5 marks level of the question L1 – L8
should be L2and above.

Bloom’s taxonomy (BT)

Mid-Term Descriptive: 30 M
MISAC 2 30 Mins 30 level of the question L1 – L20
Examination
1 should be L2 and above.

Quiz/MCQs/ Bloom’s taxonomy (BT)

MISAC 3 Surprise 15 Mins 5 level of the question L21 – L25
Assignment should be L2 and above.

Quiz/MCQs/ Bloom’s taxonomy (BT)

FISAC
Surprise - 10 - level of the question L26- L36
Assignment/ should be L3 and above.

END – SEMESTER ASSESSMENT

Answer all 5 full questions Comprehensive
of 10 marks each. Each Bloom’s taxonomy (BT) examination
1 Regular/Make–Up Exam 180 Mins 50 question can have 3 parts level of the question 17th week of the semester covering full
of 2/3/4/5/6 marks. should be L3 and above. syllabus.
Page 3 of 5 MIT/GEN/F-01/R3
 LESSON PLAN
L No TOPICS Course
Outcome
Addressed
1 Introduction -- Energy Sources-Voltage Source, Current source. Source 1
Transformation, Kirchhoff’s Laws, Star Delta Conversion
2 Analysis of networks containing dependent sources by node method of analysis. 1
3 Analysis of networks containing dependent sources by mesh method of analysis. 1
4 Network Theorems- Introduction, Superposition Theorem 1
5 Thevenin’s Theorem 1
6 Norton’s Theorem 1
7 Maximum Power Transfer Theorem 1
8 Reciprocity Theorem, Additional problems. 1
9 Transient Analysis: Introduction, The behaviour of circuit elements under switching 1
conditions and their representation
10 First Order Circuits: Evaluation of initial and final conditions in RL, RC for DC 1
excitations
11 Evaluation of initial and final conditions in RLC Circuits for DC Excitations 2

12 Analysis of source free RL and RC circuits 2

13 Step response of RL and RC circuits - natural and forced response 2

14 Second Order Circuits: Evaluation of initial and final conditions in RLC circuits for 2
DC excitations
15 Initial conditions in RLC circuit -contd 2

16 Analysis of source free RLC circuit 2

17 Analysis of source free RLC circuit- contd 2
18 Step response of series RLC circuit- natural and forced response 2
19 Step response of parallel RLC circuit- natural and forced response 2
20 General second order circuits 2
21 Circuit Analysis in the s-domain : Review of Laplace Transform: Definition, 4
Transform for standard time functions, Properties, Inverse Laplace Transform,
22 Representation of R, L and C in s domain, Node band mesh analysis in the s- 4
domain.
23 Response of RL , RC and RLC networks using Laplace Transform method. 4
24 Using Network theorems to analyze networks in s- domain. 4
25 Evaluating initial and final conditions using initial and final theorems. 4
26 Linear wave shaping: Introduction, RC high pass circuit- Frequency response, step 3
response, pulse response.
27 Response of High pass RC circuit to a square wave input ( exponential ) 3
28 Response of High pass RC circuit to ramp input, RC circuit as differentiator, 3
Example problems
29 RC low pass circuit- Frequency response, step response, pulse response. 3
30 Response of Low pass RC circuit to a square and ramp input , RC circuit as Integrator 3
31 Network functions: Introduction, Driving point impedance and admittance 5
functions, transfer functions. Poles and Zeros of Network Functions,
32 Examples on finding the network functions. 5
 33 Open circuit impedance parameters, 5
34 short circuit admittance parameters 5
35 Transmission parameters, Hybrid parameters. 5

36 Relationship between two port parameters, Parallel, Series & Cascade connection of 5
two port networks

Page 4 of 5
MIT/GEN/F-01/R3
Course Articulation Matrix
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO PO PO PO PSO PSO PSO
9 10 11 12 1 2 3
CO
CO1 2 2 0 0 2 0 0 0 0 0 0 2 2
CO2 2 2 0 0 2 0 0 0 0 0 0 2 2
CO3 2 2 0 0 2 0 0 0 0 0 0 2 2
CO4 2 2 0 0 2 0 0 0 0 0 0 2 2
CO5 2 2 0 0 2 0 0 0 0 0 0 2 2

Articul 2 2 0 0 0 0 0 0 0 0 0 2 2
ation
Level

FACULTY MEMBERS TEACHING THE COURSE (IF MULTIPLE SECTIONS EXIST):

FACULTY SECTION FACULTY SECTION

A D
B VLSI
C
References:
1. M. E. Van Valkenberg, “Network analysis”, Prentice Hall of India, 2000.
2. William H. Hayt, Jack E. Kemmerly, Steven M Durbin, “Engineering Circuit Analysis”, 8 th edition, Tata
McGraw Hill India,
3. Millman, H. Taub, “Pulse, digital and switching waveforms”, 3nd Edition, McGraw Hill.
4. Ravish R Singh, “Network analysis and Synthesis”, McGraw Hill, 2013.
5. Joseph Edminister, “Electric Circuits”, Schaum’s Series, McGraw Hill.
* https://nptel.ac.in/courses/108102042
https://nptel.ac.in/courses/108102042
Submitted by: Dayananda Nayak

(Signature of the faculty)

Date: 01-07-2024

Approved by:

(Signature of HOD)