Turbine Pumps

Models 16 and 17 Coro-Flo® Regenerative Turbine Pumps

For High Differential Pressure Applications Using LPG and Many Other Liquefied Gases

Autogas Dispensing
C-Model

Forklift Refueling
F-Model–101

Cylinder Filling

DL-Model

A Unit of IDEX Corporation

 Features and Specifications
Smooth, quiet design… Approximately 20% more flow than
Models 16 and 17 Coro-Flo® turbine pumps are designed for major competitors...
LPG, NH3, and other light liquids and are ideal for low-
capacity, high-head pumping applications. Since the impeller Typical Applications
is the only moving part, the Coro-Flo® is extremely quiet and
free of vibration and pulsation. Additionally, the impeller is • Autogas Dispensing
free-floating so there is no contact with the pump case or • Cylinder Filling
head. This design feature offers smooth continuous flow and
• Forklift Refueling
years of trouble-free service.
• Vaporizer Feed

Simple to service… • Aerosol Propellant

The Coro-Flo® is designed for simplicity of inspection and For Thin Liquids & Liquefied Gases
service. With just the cover removed, the impeller and seal
can be serviced without disturbing the piping system. The • Propane • Gasoline
balanced mechanical seal comes with its own sleeve; • Butane • Solvents
together they provide extremely reliable service.
• Ammonia • Propylene

Suitable for many applications… • Refrigerants • Pentane

• Sulfur Dioxide • Foam Blowing Agents
All Coro-Flo® turbine pumps are listed by Underwriters’
Laboratories, Inc. for use in LP-Gas and anhydrous ammonia • Carbon Dioxide
service. Although the Coro-Flo® was originally developed to
fill propane cylinders, its highly versatile design found its way
into many other liquefied gases such as NH3, CO2, SO₂, and Specifications
refrigerants. Other applications include autogas dispensing,
forklift refueling, vaporizer feed, aerosol filling systems, boiler Specifications Models 16 and 17
feed, and moving condensate. 1-1/4" NPT
Inlet
1-1/2" ANSI 300 lb. (optional)
1" NPT
Nozzle Rotation... Outlet
1" ANSI 300 lb. (optional)
Rotation Clockwise only (from driven end)
The pump nozzles may be rotated into four different
Maximum RPM 3,600
positions, 90 degrees apart, if desired.
Maximum working pressure 400 psig (27.6 Bar)
Maximum differential
200 psig (13.8 Bar)
OUT
OUT pressure
90° 90° 180°180° IN IN 270°270°
Temperature range °F (°C) -25 to 225 (-32 to 107)
Maximum viscosity 400 ssu
IN IN Case/Cover Ductile iron ASTM A536
CORKEN

CORKEN

CORKEN

CORKEN

Bronze (standard), 303 stainless

Impeller material options
CORKEN
CORKEN
CORKEN
CORKEN

OUT
OUT OUT
OUT steel, ductile iron
Stressproof steel (standard),
Shaft material options
IN IN 416 stainless steel
Buna-N standard. Ethylene-
IN IN
O-ring material options propylene, Kalrez ®1, Neoprene ®1,
OUT
OUT PTFE, and Viton ®1 optional.
180°180° IN IN 270°270° Seal sleeve material Aluminum (standard),
options 416 stainless steel

Seal seat material Silicon carbide

CORKEN

CORKEN

Seal housing material Cadmium plated steel (standard),

CORKEN
CORKEN

TOUT OUTOUT options 416 stainless steel

1
Registered trademark of the DuPont Company.
IN IN

2 OUTOUT
 Performance
Model 16 Performance Curves 1 3,450 RPM at 60 Hz 2,880 RPM at 50 Hz
L/min gpm Hp kW
20 4 3.00
70
18

60 16
3 2.25
14
50

Power Required
Flow Rate

12
40
10 2 1.50

30 8

6
20 1 0.75
4
10 3 Hp motor, 9.8 GPM, 150 psi differential pressure at 60 Hz.
2
2 Hp motor, 13.7 GPM, 90 psi differential pressure at 60 Hz.
0 0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180
psi

0 1 2 3 4 5 6 7 8 9 10 11 12
bar
Differential Pressure

Model 17 Performance Curves 1 3,450 RPM at 60 Hz 2,880 RPM at 50 Hz

L/min gpm Hp kW
20 4 3.00
70
18

60 16
3 2.25
14
50

Power Required
Flow Rate

12
40
10 2 1.50

30 8

6
20 1 0.75
4
10 2.2 kW (3 Hp) motor, 28.4 L/min (7.5 GPM), 10 bar (145 psi) differential pressure at 50 Hz.
2
1.5 kW (2 Hp) motor, 36.0 L/min (9.5 GPM), 8 bar (116 psi) differential pressure at 50 Hz.

0 0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180
psi

0 1 2 3 4 5 6 7 8 9 10 11 12
bar
Differential Pressure

1
Curves shown are based on 100% propane from an above ground installation.
3
D-Model (Direct Mount) 1 F-Model (Frame Mount) 1
1-5/16 4-5/16 14-3/32
(33.3) (109.5) (358.0) 1-5/16 4-5/16 12-13-16
3/4" NPT Auxillary 2
Discharge Port 1/4" NPT
3/4" NPT Auxillary (33.3) (109.5)
2
(325.4)
Outlet 1" NPT (50.8)
Discharge Port Outlet (50.8)
1" NPT
Inlet
1-1/4" NPT Inlet Keyway
1-1/4" NPT 1/4
(6.4)
10-3/8 2-5/16
(263.5) (58.7) 8-1/2 2-5/16
(215.9) (58.7)
CORKEN
9
(228.6) Diameter 7-1/8 Bolt 5/16 (7.9)
Keyway 1.000 (25.40) (181.0)
1/4 (6.4) 3-1/2 Diameter
5-3/8 0.998 (25.35)
(88.9) 1.000 (25.40)
(136.5)
0.998 (25.35)
Bolt 5/16 (7.9) 1-11/16
(42.9)
2-1/16 2-1/16
(52.4) (52.4) 1/2 1-3/4 4-5/8 4-7/16
3-7/8 3-7/8 8-3/64 4-5/8 (12.7) (44.5) (117.5) (112.7)
1/2 5-1/2
(98.4) (98.4) (204.4) (117.5) 5-1/2
9-1/4 (12.7) (139.7)
(235.0) 5-1/2 (139.7)
(139.7) 7-3/4
(196.9)

C-Model (Close-Coupled) with 3 Hp, Single and Three Phase Motor 1

F G P Q
H R
I
B
C
E
A

L
J
K

V
D

M N S T
O U
Motor
A B C D E F G H I J K L M N O P Q R S T U V
Phase
3/4 3/4 Bolt:
Inlet: Outlet: 1/4 (6.4) 7-1/2 4-5/16 6 1-5/16 8-1/8 6-13/16 9-1/2 3-3/4 3-3/4 8-5/8 19-13/16 2 13-15/16 4-1/2 7-1/16 6-5/8
Single (19.1) (19.1) 7/16
1-1/4" NPT 1" NPT NPT (190.5) (109.5) (152.4) (33.3) (206.4) (173.0) (241.3) (95.3) (95.3) (219.1) (503.2) (50.8) (354.0) (114.3) (179.4) (168.3)
NPT NPT (11.1)
3/4 3/4 Bolt:
Inlet: Outlet: 1/4 (6.4) 10-1/2 4-5/16 7-1/8 1-5/16 8-1/8 6-13/16 9-1/2 3-3/4 3-3/4 8-7/8 17-1/4 2 10-3/4 4-1/2 6-5/8 6-5/8
Three (19.1) (19.1) 7/16
1-1/4" NPT 1" NPT NPT (266.7) (109.5) (181.0) (33.3) (206.4) (173.0) (241.3) (95.3) (95.3) (225.4) (438.2) (50.8) (273.1) (114.3) (168.3) (168.3)
NPT NPT (11.1)

D-Model (Direct Mount) with 3 Hp, Single and Three Phase Motor 1
F G
H P Q
I B R
E C

J L
K

D V

M N S T
O U

Motor
A B C D E F G H I J K L M N O P Q R S T U V
Phase
Bolt:
Inlet: Outlet: 1/4 3/4 3/4 7-9/16 4-5/16 6 1-5/16 9 7-11/16 10-3/8 3-7/8 3-7/8 9-1/4 28-3/16 2 22-7/16 4-5/8 8-1/16 5-13/16
Single 13/32
1-1/4" NPT 1" NPT (6.4) (19.1) (19.1) (192.1) (109.5) (152.4) (33.3) (228.6) (195.3) (263.5) (98.4) (98.4) (235.0) (716.0) (50.8) (569.9) (117.5) (204.8) (147.6)
(10.3)
Bolt:
Inlet: Outlet: 1/4 3/4 3/4 9-3/8 4-5/16 6-7/16 1-5/16 9 7-11/16 10-3/8 3-7/8 3-7/8 9-1/4 24-3/16 2 17-1/16 4-5/8 8-1/16 5-13/16
Three 13/32
1-1/4" NPT 1" NPT (6.4) (19.1) (19.1) (238.1) (109.5) (163.5) (33.3) (228.6) (195.3) (263.5) (98.4) (98.4) (235.0) (614.4) (50.8) (433.4) (117.5) (204.8) (147.6)
(10.3)
1
All dimensions in inches (millimeters)

Solutions beyond products... CORKEN, INC. • A Unit of IDEX Corporation

3805 NW 36th Street, Oklahoma City, OK 73112 U.S.A.
Phone (405) 946-5576 • FAX (405) 948-7343
Visit our website at www.corken.com • E-mail us at cocsalesdept@idexcorp.com

CF100A @CorkenInc PRINTED IN THE USA

MAY 2018