Bengalac Aluminium

Technical Data Sheet
^(ValidationDate) 4101 4101 5 1

AE - BH - EG - KW - OM - QA - SA Approved Other
Bengalac Aluminium
Product description
Type
This product is a decorative aluminium paint. Based on alkyd resin.
Features and benefits

Provides Aluminium finish. Free from harmful heavy metals such as Mercury, Lead, Cadmium, Arsenic,
Chromium etc. Easy application.
Recommended use
Ideal as a topcoat for alkyd primers and under coats.
Substrate
Cement plaster, concrete, wood, steel etc.
Product data
Packaging size 4 L and 18L
Egypt and Libya : 0.75 L, 3 L and 10 L
Colours Aluminium
Solids by volume 42 ± 2 volume% Theoretical
Specific gravity
Flash point Closed cup: 36°C (96.8°F)

VOC 476 g/l ISO 11890 EU
VOC comments This is the theoretical value. Tested value will vary depending on test methodology,
accuracy of equipment used for testing and test conditions.
Application data
The product can be applied by
Roller : Recommended.
Spray : Use airless spray or conventional spray.
Brush : Recommended to paint corners and edges.
Guiding data for airless spray

Nozzle tip 0.021–0.027"
Spray angle degrees 65–80°
Pressure at nozzle 150 Kg/cm² (2100 psi)
Cleaning of painting tools

Jotun Thinner No. 2
Date of issue: 17.04.2018 Product code: 4101 Page: 1/3
This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) for this product.
For your nearest local Jotun office, please visit our website at www.jotun.com.
1

Bengalac Aluminium
Film thickness per coat

Typical recommended range
Dry film thickness 20 - 30 µm
Wet film thickness 50 - 80 µm
Film thickness will vary and is calculated as average. Film thickness per coat values are presented here.
Theoretical spreading rate 19.5 - 13 m²/l
Spreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature,
wastage during painting etc.
Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa.
Thinner
Jotun Thinner No. 2
Dilution
Maximum 10 %
Conditions during application

The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air,
measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper
drying. The moisture content in the substrate should not exceed 4 % (by weight). The coating should not be
exposed to oil, chemicals or mechanical stress until fully cured.
Drying times
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will
be affected correspondingly.
1. Recommended data given is, for recoating with the same generic type of paint.
2. In case of multi-coat application, drying times will be influenced by the number and sequence and by the
total thickness of previous coats applied.
3. The surface should be dry and free from any contamination prior to application of the subsequent coat.
The drying time is measured by stated values:

Relative Humidity (RH) 50 %
Substrate temperature 10 °C 23 °C 40 °C
Surface (touch) dry 6h 3h 1h

Hard dry 12 h 5h 1h
Dry to over coat, minimum 20 h 8h 2h
Directions for use

Surface preparation
The substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc. All traces of form release
agents/curing agents must be removed. A light sanding with suitable abrasive material is recommended before
application. Any resulting dust/loose particles must be removed.
Recommended paint system
Primer
Bengalac Red Oxide Primer : 1 Coat

1

Bengalac Aluminium
Topcoat
Bengalac Aluminium : 2 Coats
Remarks
Other systems may be specified, depending on area of use.
Contents of packaging with different batch numbers must be mixed together before use.
Please refer to the Decorative Sales Department for technical advice.
This product is available in: United Arab Emirates, Bahrain, Kuwait, Qatar, Saudi, Oman, Egypt and Libya
Storage
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well
ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle
with care.
Health and safety

Please observe the environmental and precautionary notices displayed on the container.
A Material Safety Data Sheet for the product has been issued.
Detailed information regarding health and safety risks and precautions for the use of this product is specified in
the product's Safety Data Sheet.
First-aid measures, refer to section 4.
Handling and storage, refer to section 7.
Transport information, refer to section 14.
Regulatory information, refer to section 15.
Disclaimer
The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and
practical experience. Jotun's products are considered as semi-finished goods and as such, products are often
used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product
itself. Minor product variations may be implemented in order to comply with local requirements. Jotun reserves
the right to change the given data without further notice.
Users should always consult Jotun for specific guidance on the general suitability of this product for their needs
and specific application practices.
If there is any inconsistency between different language issues of this document, the English (United Kingdom)
version will prevail.


Bengalac Aluminium

Uploaded by

Copyright:

Available Formats

Bengalac Aluminium

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Bengalac Aluminium

Uploaded by

Copyright:

Available Formats

Technical Data Sheet

^(ValidationDate) 4101 4101 5 1

Features and benefits

Solids by volume 42 ± 2 volume% Theoretical

Flash point Closed cup: 36°C (96.8°F)

Guiding data for airless spray

Cleaning of painting tools

Date of issue: 17.04.2018 Product code: 4101 Page: 1/3

This Technical Data Sheet supersedes those previously issued.

Technical Data Sheet

Film thickness per coat

Conditions during application

The drying time is measured by stated values:

Surface (touch) dry 6h 3h 1h

Directions for use

Recommended paint system

Date of issue: 17.04.2018 Product code: 4101 Page: 2/3

This Technical Data Sheet supersedes those previously issued.

Technical Data Sheet

Please refer to the Decorative Sales Department for technical advice.

Health and safety

Date of issue: 17.04.2018 Product code: 4101 Page: 3/3

This Technical Data Sheet supersedes those previously issued.

You might also like