Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 70 views

    1154 Datasheet

    Uploaded by

    jagdishsimariya
    This document provides specifications for a USB to RS485 converter module that allows connection between a PC's USB port and RS485 serial ports. The module converts the USB connection to a virtual COM port and supports data transmission rates up to 115 kbps. It has a mini-B USB connector, screw terminal for RS485 connection, and supports Windows, Mac, and Linux operating systems.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    1154 Datasheet

    Uploaded by

    jagdishsimariya
    70 views3 pages
    This document provides specifications for a USB to RS485 converter module that allows connection between a PC's USB port and RS485 serial ports. The module converts the USB connection to a virtual COM port and supports data transmission rates up to 115 kbps. It has a mini-B USB connector, screw terminal for RS485 connection, and supports Windows, Mac, and Linux operating systems.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for a USB to RS485 converter module that allows connection between a PC's USB port and RS485 serial ports. The module converts the USB connection to a virtual COM port and supports data transmission rates up to 115 kbps. It has a mini-B USB connector, screw terminal for RS485 connection, and supports Windows, Mac, and Linux operating systems.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    70 views3 pages

    1154 Datasheet

    Uploaded by

    jagdishsimariya
    This document provides specifications for a USB to RS485 converter module that allows connection between a PC's USB port and RS485 serial ports. The module converts the USB connection to a virtual COM port and supports data transmission rates up to 115 kbps. It has a mini-B USB connector, screw terminal for RS485 connection, and supports Windows, Mac, and Linux operating systems.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Email: info@sunrom.com or sunrom@gmail.com Visit us at http://www.sunrom.

    com

    Document: Datasheet

    Date: 7-Feb-11

    Model #: 1154

    Products Page: www.sunrom.com/p-367.html

    USB to RS485 Converter - 4 Wire Full Duplex


    USB to RS485 Converter is an intelligent module which connects to a PC Universal Serial Bus port providing a high-speed asynchronous RS-485 serial port. The USB-485 Converter provides easy connectivity between the PC and standard communication ports, not requiring PC reconfiguration, assignment of IRQs or jumper settings. The USB to RS485 module is a cost-effective way to convert RS485 or RS422 industrial buses to a USB interface. When connected to a PC USB port the USB to RS485 module is automatically detected and is installed as a native COM port which is compatible with any existing serial communication application. Multiple modules can be installed when using USB hubs thus allowing a hassle-free configuration of a multi serial system without any IRQ or DMA configuration.

    Specifications
    Parameter Communication speed Power consumption Temperature Range Humidity Range Modes of Operation Termination RS485 Bias Receiver Input Impedance Receiver Input Sensitivity Receiver Input Hysteresis Driver Output Capability Value From 75 bps to 115 kbps max 50mA @5volt (power provided by the PCs USB port.) 0C to 50C. 10 to 90% R.H. Non-condensing. RS-485 Full Duplex (4-wire) 120R Ohm 4K7 resistors as pull-up/pull-down Data+ and Data- respectively. 12 K Ohm 200 mV 50 mV Typ 60 mA Max

    System Requirements
    A PC with a minimum of a 75MHz Pentium, or equivalent A minimum of 16M bytes of RAM One available USB type port compliant with USB1.1 or 2 Drivers are included on our software CD Supported Operating Systems: Windows 2000/XP/Win7/Server 2003, Mac & Linux 2.4

    Features
    Computer interface: USB V1.1 Plug and Play. Operational system virtual serial port driver. Supports Windows 98/ME/XP/ Win7/2000/CE, MAC & Linux 2.4.20 or superior. Field Interfaces: RS485 Full Duplex, Automatic flow control for RS485 Full Duplex. Transmission rate: From 75 bps to 115 kbps max Maximum RS485/RS422 cable length : 1200 m Maximum number of devices in the RS485 network: 32 devices Power: from the USB port. RS485 interface. USB connection: Mini-B connector A 1.5 m cable with plugs mini-B and A is provided with the module. RS485 connector: screw terminal type accepting 1.5 mm (16 AWG) wires. ABS enclosure Meet or Exceed the Requirements of ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27 Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments Thermal Shutdown Protection Driver Positive and Negative Current Limiting

    Connection to the System


    The USB-RS485 Converter is equipped with a USB cable and a USB type A connector for connection to a PC USB port and a two pin Pluggable Screw Terminal for connection to a RS-485 equipped data or communication terminal.

    Typical RS485 System

    Sunrom Technologies

    Your Source for Embedded Systems

    Visit us at www.sunrom.com

    Supported Baud Rates

    Sunrom Technologies

    Your Source for Embedded Systems

    Visit us at www.sunrom.com

    You might also like