Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
177 views

Introduction To Non Destructive Testing (NDT)

Non-destructive testing methods allow inspection of materials and components without damaging them. There are hundreds of NDT techniques including visual inspection, thermography, ultrasound, x-rays, magnetic particle inspection, liquid penetrant testing, and eddy current testing. NDT provides advantages over destructive testing by allowing in-service inspection and testing at remote locations without harming the item. Common NDT methods include liquid penetrant testing to detect surface defects, magnetic particle inspection for ferromagnetic materials, eddy current testing of electrically conductive materials, radiography using x-rays or gamma rays, and ultrasound using high frequency sound waves.

Uploaded by

Engr Arfan Ali Dhamraho
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
177 views

Introduction To Non Destructive Testing (NDT)

Non-destructive testing methods allow inspection of materials and components without damaging them. There are hundreds of NDT techniques including visual inspection, thermography, ultrasound, x-rays, magnetic particle inspection, liquid penetrant testing, and eddy current testing. NDT provides advantages over destructive testing by allowing in-service inspection and testing at remote locations without harming the item. Common NDT methods include liquid penetrant testing to detect surface defects, magnetic particle inspection for ferromagnetic materials, eddy current testing of electrically conductive materials, radiography using x-rays or gamma rays, and ultrasound using high frequency sound waves.

Uploaded by

Engr Arfan Ali Dhamraho
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 26

Non- Destructive Testing

Methods

to test soundness or properties of a


material , component , assembly without
affecting the materials properties
100s of NDT methods available

Examples
Visual

Inspection, Thermo graphic imaging , UT, Xray


etc , MPI, LPI, strain guaging

Purpose for NDE

To locate/assess

defects in materials

and assemblies

To check

hardness

dimensions , thickness, coating,

NDE
Advantages

Can be performed on actual material not on


samples as in destructive tests
Can be performed at remote sites

LPI
Used

for surface defects only


For non-porous materials
Can be performed on variety of material,
magnetic, non- magnetic, plastics etc

LPI.

Method

Apply Penetrant which seeps into defects (as low as


0.1micron size) by capillary action
Red dye penetrant for use in in daylight
Fluorescent penetrant for use under dark conditions
After dwell time clean off the excess penetrant material
Apply developer and observe the penetrant to come out of
surface defects

Dye Penetrant Chemicals

Wide range of Dye Penetrant Chemicals are used in various


industries for various purposes.
The Dye Penetrant Chemicals are available for checking the
cracks in visible day light. Also they are available in two forms,
viz. solvent removable and water washable.
Fluorescent Penetrant Chemicals, which indicate defects as
brilliant yellow green lines under UV Black Light are available
These Fluorescent Dye Penetrants are widely appreciated
because of their water and solvent washable capabilities.

Dye Penetrant Chemicals

Magnetic particle Inspection


Based on the principle of flux leakage
around defects on ferromagnetic materials
Can be performed only on ferromagnetic
materials

Defects

must be presented at an angle to the


magnetic lines of force

MPI Limitations

Can be performed only on ferromagnetic materials


Can detect defect that are open or just below the
surface
Magnetic flux must cross the defect being sought
Can not be done at higher temperatures because
ferromagnetic material lose their magnetic property
at elevated temperatures ( above their Curie
temperature)

Eddy Current Inspection

Electrically conducting material generates eddy


currents mostly on the surface or extending to a
shallow depth when interacts with a electrically
excited coil
Used for detecting defects, sorting metals on the
basis of their chemical analysis or their metallurgical
structure
Used extensively in aircraft industry to detect
corrosion and the breakdown of bonding in laminated
materials

Eddy Current Inspection


Place

the article within the coil


Pass current (frequency 50Hz to 500Hz)
Eddy currents which generate their own
magnetic field
Detect/measure eddy current using primary
or secondary coil

Radiographic Inspection
Uses

X-rays OR

Gamma

rays (wave length shorter than X-

ray)
Very low wave lengths (10-7 to 10-12)
Differential

object

absorption of waves by the test

Radiographic Inspection
Uses

special photographic film


Amount of radiation that captured by film
depends on material thickness, density,
defects etc.
Amount of darkening is proportional to
amount of radiation absorbed just as what
happens when light falls on photographic
film.

Ultrasonic testing
Pulses

of High Frequency sound waves


beamed into material under test
Analyze reflected echoes from material
Frequencies

used : 1- 5 MHz (max 20Mhz)

Sound frequency- 20Hz to 20kHz

Ultrasonic testing
Sound

waves reflects off any interface egporosity, cracks , inclusions etc


Principles of light reflections apply angle of
incidence, angle of reflection etc

So normal strike will be reflected back to its


source

Measures

relative times for pulses to reflect


back from defects or back wall

Ultrasonic testing
Waves

produced by thin wafers of quartz or


barium nitrate
Generate sound waves (vibrate at electrical
frequency) when electrically excited

UT - Advantages

High penetrating power, which allows the detection of flaws


deep in the part.
High sensitivity, permitting the detection of extremely small
flaws.
Only one surface need be accessible.
Greater accuracy than other nondestructive methods in
determining the depth of internal flaws and the thickness of
parts with parallel surfaces.
Some capability of estimating the size, orientation, shape and
nature of defects.
Nonhazardous to operations or to nearby personnel and has no
effect on equipment and materials in the vicinity.
Capable of portable or highly automated operation

UT - Disadvantages

Manual operation requires careful attention by experienced


technicians
Extensive technical knowledge is required for the development of
inspection procedures.
Parts that are rough, irregular in shape, very small or thin, or not
homogeneous are difficult to inspect.
Surface must be prepared by cleaning and removing loose scale,
paint, etc, although paint that is properly bonded to a surface usually
need not be removed.
Couplants are needed to provide effective transfer of ultrasonic wave
energy between transducers and parts being inspected unless a noncontact technique is used. Non-contact techniques include Laser and
Electro Magnetic Acoustic Transducers (EMAT).
Inspected items must be water resistant, when using water based
couplants that do not contain rust inhibitors.

NDT test of an V2500 engine blade

UT animation
http://www.youtube.com/watch?v=9-

BHDoiii2Y

AINDT - Australia
http://www.aindt.com.au/certification/faqs/11-

does-aindt-recognize-asnt-certifications-ifnot-what-is-needed-to-meet-aindtrequirements.html

Strain Guaging
Used

to measure the stress levels in a


material , especially where stress
concentration is suspected
Method:
Measure strain and then calculate stress
using the formula
Stress = Youngs Modulus X Strain

Strain Guaging
Photo

polarized light creates fringes of different shades


can be obtained to stress/strain
Shade pattern is a function of strain/stress in the
material

Brittle

elastic Strain Guaging

Coatings

Uses brittle lacquer

Resistance

Strain Guaging

Measures resistance change under stress/strain

Coating Thickness Testing


Several

methods available

magnetic method (for magnetic or non-magnetic


base materials)
Eddy current methods
X-ray, Beta ray used for coating/sheet thickness

You might also like