Professional Documents
Culture Documents
Chapter 18:temperature, Heat and The First Law of Thermodynamics (Fundamental of Physics, 10 Edition)
Chapter 18:temperature, Heat and The First Law of Thermodynamics (Fundamental of Physics, 10 Edition)
18.1 Thermodynamics :
One of the principal branches of physics and engineering is
thermodynamics, which is the study and application of the thermal energy
(often called the internal energy) of systems. One of the central concepts of
thermodynamics is temperature.
Temperature :
Temperature is an SI base quantity related to our sense of hot and cold.
It is measured with a thermometer, which contains a working substance with
a measurable property, such as length or pressure, that changes in a
regular way as the substance becomes hotter or colder.
Recall: Temperature Scales
Here
T= temperature in Kelvin scale
= temperature in Celsius scale
= temperature in Fahrenheit scale
Class Work: Temperature difference
The temperature of an object is 25 °C. After absorbing some amount
of heat the temperature of the object becomes 55 °C. What would be
the temperature difference in Kelvin scale, in this case?
Solve it by yourself!
The Zeroth Law of Thermodynamics:
Suppose that, as in following Fig (a) , we put a thermoscope (which we shall call body T) into
intimate contact with another body (body A).The entire system is confined within a thick-walled
insulating box.
“If bodies A and B are each in thermal equilibrium with a third body T, then A and B are in
thermal equilibrium with each other.”
In less formal language, the message of the zeroth law is: “Every body has a property called
temperature. When two bodies are in thermal equilibrium, their temperatures are equal. And vice
versa.”
18.4 ABSORPTION OF HEAT :
Temperature and Heat
A change in temperature is due to a change in
the thermal energy of the system because of a
transfer of energy between the system and the
system’s environment. The transferred energy is
called ‘ HEAT’ and is symbolized Q.
Heat is positive when energy is transferred to a
system’s thermal energy from its environment
(we say that heat is absorbed by the system).
Heat is negative when energy is transferred from
a system’s thermal energy to its environment (we
say that heat is released or lost by the system).
Heat:
Heat is the energy transferred between a system
and its environment because of a temperature
difference that exists between them.
1 cal = 3.968 10-3 Btu = 4.1868 J.
The Absorption of Heat by Solids and Liquids
Heat Capacity
The heat capacity, C of an object is the proportionality constant between the heat Q that the
object absorbs or loses and the resulting temperature change ΔT of the object; that is,
Q ΔT Q = C ΔT = C ( Tf – Ti )
C = Q/ ΔT
in which Ti and Tf are the initial and final temperatures of the object, respectively.
Unit : cal/ C° or J/K
The molar specific heat of a material is the heat capacity per mole, which means per 6.02 1023
elementary units of the material.
Thus 1 mol of aluminum means 6.02x1023 atoms (the atom is the elementary unit), and 1 mol of
aluminum oxide means 6.02 x1023 molecules (the molecule is the elementary unit of the
compound).
When quantities are expressed in moles, specific heats must also involve moles (rather than a
mass unit); they are then called molar specific heats.
The molar specific heat, cm of a material is the heat capacity per mole.
Q = ncm ΔT
cm = Q/nΔT
Unit : cal/mol-C° or J/ mol-K
Problem 23 : A small electric immersion heater is used to heat 100 g of water for
a cup of instant coffee. The heater is labeled “200 watts” (it converts electrical
energy to thermal energy at this rate). Calculate the time required to bring all this
water from 23° C to 100° C, ignoring any heat losses.
Solution:
m = 0.100 kg
P = 200 W
c = 4190 J/kg-K
Ti = 23°C = 23+273 = 296 K
Tf = 100°C = 100 +273 K= 373 K
T = Tf –Ti = 373 – 296 K=77 K
Q = cm T
P = W/t
P = Q/t
Now, t = = = = 160 sec (Ans)
Problem 24 : A certain substance has a mass per mole of 50.0 g/mol. When 314 J
is added as heat to a 30.0 g sample, the sample’s temperature rises from 25.0° C
to 45.0° C. What are the (a) specific heat and (b) molar specific heat of this
substance? (c) How many moles are in the sample?
Solution :
Given, m = 30 g = 30 10 -3 kg ; Tf = 45°C ; Ti = 25°C ; Q = 314 J
T = (45 + 273)K – (25+273)K = (45 -25 )K = 20 K
(a) Q = mcT
c = = = 523 J/kg-K
So, Msam = nM
Now, number of mole, n = = = 0.600 mol
(b) Q = ncmT
cm = = = 26.2 J/mol-K
18.4: Heats of transformation
Q = mL
When energy is absorbed as heat by a solid or liquid, the temperature of the sample does not
necessarily rise. Instead, the sample may change from one phase (or state) to another.
The amount of energy required per unit mass to change the state (at constant temperature) of a
particular material is its heat of transformation L.
Thus, when a sample of mass m completely undergoes a phase change, the total energy transferred is
Q = mL
Heat of Vaporization
The heat of vaporization LV is the amount of energy per unit mass that must be added to vaporize a
liquid or that must be removed to condense a gas. For water at its normal boiling or condensation
temperature, Q = m Lv [LV = 539 cal/g = 40.7 kJ/mol = 2256 kJ/kg]
Heat of Fusion
The heat of fusion Lf is the amount of energy per unit mass that must be added to melt a solid or that
must be removed to freeze a liquid. For water at its normal freezing or melting temperature,
Q = m Lf [Lf = 79.5 cal/g = 6.01 kJ/mol = 333 kJ/kg]
Problem 27 : Calculate the minimum amount of energy, in joules, required to
completely melt 130 g of silver initially at 15.0° C. Consider melting temperature of silver
is 1235 K and its specific heat capacity and latent heat of fusion are 236 J/kg-K and 105
KJ/kg, respectively.