This repair manual provides information on fixing and sealing products, lubrication specifications, pneumatic and hydraulic line specifications, and standardized torque values for hydraulic fittings. It also includes documentation on the "ENG A15" engine module, including its functions, inputs/outputs, and terminal specifications.
The document provides information on servicing an engine, including:
1. Descriptions of engine identification, torque settings, and sealants.
2. Checklists for inspecting injectors and recording test results.
3. Instruction sheets for checking hydraulic pressure on different engine circuits and inspecting injectors.
The document provides information on engine maintenance and repair for an Arion 630-610C tractor, including:
1. Specifications for torque settings and sealants for engine components.
2. Instructions for inspecting the cylinder head, valves, rocker pins and springs, and measuring valve and guide clearance.
3. Procedures for checking the flatness of the cylinder head and measuring its thickness, as well as the valves, springs, and turbocharger.
1) The document provides specifications and part replacement guidelines for engines.
2) Key specifications include valve timing, compression ratio, piston dimensions, and valve guide clearances.
3) It instructs only to replace certain parts like seals, gaskets, and pins when reassembling engines, and to apply specified oils and greases to locations.
This technical catalog provides specifications for Poclain Hydraulics modular hydraulic motors models MS18 and MSE18. It includes information on motor characteristics, dimensions, support types, load curves, valving systems, options and the model code structure. The document is intended to help machine manufacturers incorporate these products and ensure optimal operation in a safe manner. Metric units are used and safety comments are indicated.
1) The document provides instructions for inspecting and adjusting the cam chain tension adjuster, removing and installing cam chain guides, and inspecting the cam chain tensioner.
2) The cam chain tension adjuster inspection involves compressing the plunger and ensuring it extends automatically when tapped.
3) Cam chain guide removal requires removing the cylinder head cover, guides, and cylinder head. Inspection checks for wear on the contacting surfaces.
4) Cam chain tensioner inspection requires removing the cylinder and starter clutch to access the tensioner and check for wear.
This document provides product information for various glass pressure tubes and accessories sold by Ace Glass, Inc. It includes specifications like dimensions, thread types, pressure ratings, and part codes for tubes of different lengths and diameters, as well as replacement parts like O-rings, plugs, and pressure gauges. Safety warnings are also provided regarding using pressurized glassware and recommendations to always work behind a shield.
Weg weg-technical-poster-ustechposter-brochure-english (1)Daniel García
This document provides dimensional reference drawings for NEMA and IEC standard electric motor frames and mounting flanges. It includes dimensions for frame sizes 143T to 588/9T, as well as dimensions for C, B5, D, and B14 flange types. Key dimensions such as shaft extension, mounting hole patterns, and terminal box locations are specified. Notes indicate that dimensions are specific to WEG W22 series general purpose motors and that the drawings are for reference only, not representative of all frame sizes.
This repair manual provides information on fixing and sealing products, lubrication specifications, pneumatic and hydraulic line specifications, and standardized torque values for hydraulic fittings. It also includes documentation on the "ENG A15" engine module, including its functions, inputs/outputs, and terminal specifications.
The document provides information on servicing an engine, including:
1. Descriptions of engine identification, torque settings, and sealants.
2. Checklists for inspecting injectors and recording test results.
3. Instruction sheets for checking hydraulic pressure on different engine circuits and inspecting injectors.
The document provides information on engine maintenance and repair for an Arion 630-610C tractor, including:
1. Specifications for torque settings and sealants for engine components.
2. Instructions for inspecting the cylinder head, valves, rocker pins and springs, and measuring valve and guide clearance.
3. Procedures for checking the flatness of the cylinder head and measuring its thickness, as well as the valves, springs, and turbocharger.
1) The document provides specifications and part replacement guidelines for engines.
2) Key specifications include valve timing, compression ratio, piston dimensions, and valve guide clearances.
3) It instructs only to replace certain parts like seals, gaskets, and pins when reassembling engines, and to apply specified oils and greases to locations.
This technical catalog provides specifications for Poclain Hydraulics modular hydraulic motors models MS18 and MSE18. It includes information on motor characteristics, dimensions, support types, load curves, valving systems, options and the model code structure. The document is intended to help machine manufacturers incorporate these products and ensure optimal operation in a safe manner. Metric units are used and safety comments are indicated.
1) The document provides instructions for inspecting and adjusting the cam chain tension adjuster, removing and installing cam chain guides, and inspecting the cam chain tensioner.
2) The cam chain tension adjuster inspection involves compressing the plunger and ensuring it extends automatically when tapped.
3) Cam chain guide removal requires removing the cylinder head cover, guides, and cylinder head. Inspection checks for wear on the contacting surfaces.
4) Cam chain tensioner inspection requires removing the cylinder and starter clutch to access the tensioner and check for wear.
This document provides product information for various glass pressure tubes and accessories sold by Ace Glass, Inc. It includes specifications like dimensions, thread types, pressure ratings, and part codes for tubes of different lengths and diameters, as well as replacement parts like O-rings, plugs, and pressure gauges. Safety warnings are also provided regarding using pressurized glassware and recommendations to always work behind a shield.
Weg weg-technical-poster-ustechposter-brochure-english (1)Daniel García
This document provides dimensional reference drawings for NEMA and IEC standard electric motor frames and mounting flanges. It includes dimensions for frame sizes 143T to 588/9T, as well as dimensions for C, B5, D, and B14 flange types. Key dimensions such as shaft extension, mounting hole patterns, and terminal box locations are specified. Notes indicate that dimensions are specific to WEG W22 series general purpose motors and that the drawings are for reference only, not representative of all frame sizes.
This document provides specifications for various torque wrench sets and accessories. It includes 3-sentence summaries of each product:
The 9pc Wheel specialized torque tool set includes a 5-torque wrench, 3 impact sockets, and an assembly wheel nut wrench in various drive sizes and torque ranges.
The 11pc and 13pc Torque wrench sets include torque wrenches, flank sockets, and hex socket bits in 3/8" and 1/2" drive sizes with torque ranges from 10-21 Nm and 19-110 Nm respectively.
The Tone control torques wrench sets include preset torque wrenches in 1/4", 3/8", 1/2", 3
Sprinkler Repair Specialists
Our sprinkler builders have years of knowledge rebuilding and repairing all types of sprinklers and valves and are truly experts in their field. We have less than a 1% warranty return rate and we always go the extra mile to achieve 100% customer satisfaction.
SportsTurf Irrigation is a proud member of the GCSAA and we participate in local association scholarship events, fund-raisers, annual events and tournaments.
This document provides technical information about HERA® high-efficiency right angle drives. It begins with an overview of HERA® benefits such as up to 90% efficiency and energy savings compared to standard worm gear drives.
It then provides detailed selection information in 4 steps: 1) Use the power rating chart to select the appropriate basic HERA® model and ratio based on application horsepower, service factor, and output torque requirements. 2) Select the desired input type - C-face, coupled, or shaft input. 3) Select the required frame size. 4) Includes dimensional drawings and specifications for each HERA® model.
This document provides information on rebuilt and new parts for Toro sprinkler systems. It lists various conversion assemblies, drives, cases, valves, pistons, nozzles, caps, and tools that are available for different Toro sprinkler models. The parts are organized by the sprinkler series or component they apply to such as 630, 670, 730/750, 760/780, 830, and so on. Specifications like part numbers, colors, and Toro nozzle numbers are provided for many of the items.
Toggle clamp is a product using locking function guaranteed at the dead point of a linkage system of links and pins. It is very convenient to fix workpiece with one-touch when machining constant thickness of workpiece. Toggle clamp’s structure and operating method are simple and it provides high clamping force. Toggle clamp is widely used due to its convenience.
Massey ferguson mf 334 v tractor parts catalogue manualfjsjekkdmnem
This document provides parts information for the engine of a Massey Ferguson 334V tractor. It includes multiple sections detailing individual engine components like the cylinder block, crankshaft, pistons, cylinder head, rocker shaft, and timing gears. Each section lists the relevant parts, part numbers, quantities, and additional notes or comments. The document contains detailed technical specifications and exploded diagrams of the engine systems and components.
The document provides information on optocouplers from Avago Technologies for driving power devices such as IGBTs and MOSFETs. It summarizes the key specifications and features of models HCPL-3120, HCPL-J312, and HCNW3120. These optocouplers are suited for applications such as motor control inverters due to their high operating voltage range, output current ratings up to 2.5A, and insulation voltages up to 1414Vpeak. Diagrams and packaging details are also included.
Our sprinkler builders have years of knowledge rebuilding and repairing all types of sprinklers and valves and are truly experts in their field. We have less than a 1% warranty return rate and we always go the extra mile to achieve 100% customer satisfaction.
SportsTurf Irrigation is a proud member of the GCSAA and we participate in local association scholarship events, fund-raisers, annual events and tournaments.
we at vardhman bearings +91-9819824531 (whatsapp)
are manufacturers and exporters of all type of ball joints , tie rods , steering joints , ball studs , ball ends , rod end bearings , ball scoket joint , ball stud joint , ball angle joint , 180 degree ball joint , 90 degree ball joint , POS 3, POS 4 , POS 5 , POS 6 , POS 8 , POS 10 , POS 12 , POS 14 , POS 16 , POS 18 , POS 20 , POS 22 , POS 25 , POS 28 , POS 30 , POS 35 , POS 40 , POS 45 , POS 50 , POS 55 , POS 60 ,
SI 3 E , SI 4 E , SI 5 E , SI 6 E , SI 8 E , SI 10 E , SI 12 E , SI 15 E , SI 17 ES , SI 20 ES , SI 25 ES , SI 30 ES , SI 35 ES , SI 40 ES , SI 45 ES , SI 50 ES , SI 55 ES , SI 60 ES , SI 70 ES , SI 75 ES , SI 80 ES , SI 85 ES , SI 90 ES , SI 95 ES , SI 100 ES ,
SA 3 E , SA 4 E , SA 5 E , SA 6 E , SA 8E , SA 10 E , SA 12 E , SA 15 E , SA 17 ES , SA 20 ES , SA 25 ES , SA 30 ES , SA 35 ES , SA 40 ES , SA 45 ES , SA 50 ES , SA 55 ES , SA 60 ES , SA 65 ES , SA 70 ES , SA 75 ES , SA 80 ES , SA 85 ES , SA 90 ES , SA 95 ES , SA 100 ES ,
GIR 6 DO , GIR 8 DO , GIR 10 DO , GIR 12 DO , GIR 15 DO , GIR 17 DO , GIR 20 DO , GIR 25 DO , GIR 30 DO , GIR 35 DO , GIR 40 DO , GIR 45 DO , GIR 50 DO , GIR 60 DO , GIR 70 DO , GIR 80 DO , GIR 90 DO , GIR 100 DO
GAR 6 DO , GAR 8 DO , GAR 10 DO , GAR 12 DO , GAR 14 DO , GAR 16 DO , GAR 18 DO , GAR 20 DO , GAR 25 DO , GAR 30 DO , GAR 35 DO , GAR 40 DO , GAR 45 DO , GAR 50 DO , GAR 60 DO , GAR 70 DO , GAR 80 DO , GAR 90 DO , GAR 100 DO ,
GIR 6 DO – 2RS , GIR 8 DO -2RS , GIR 10 DO -2RS , GIR 12 DO -2RS , GIR 15 DO – 2RS , GIR 17 DO – 2RS , GIR 20 DO -2 RS , GIR 25 DO -2RS , GIR 30 DO – 2RS , GIR 35 DO -2RS , GIR 40 DO -2 RS , GIR 45 DO -2 RS , GIR 50 DO -2 RS , GIR 60 DO -2 RS , GIR 70 DO -2RS , GIR 80 DO -2 RS , GIR 90 DO -2 RS , GIR 100 DO -2RS
GAR 6 DO -2RS , GAR 8 DO -2RS , GAR 10 DO -2RS , GAR 12 DO -2 RS , GAR 14 DO -2 RS , GAR 16 DO -2RS , GAR 18 DO -2RS , GAR 20 DO -2RS , GAR 25 DO -2 RS , GAR 30 DO -2RS , GAR 35 DO -2RS , GAR 40 DO -2RS , GAR 45 DO -2 RS , GAR 50 DO -2 RS , GAR 60 DO -2RS , GAR 70 DO -2 RS , GAR 80 DO -2 RS , GAR 90 DO -2RS , GAR 100 DO -2RS ,
SI 6 C , SI 8 C , SI 10 C , SI 12 C , SI 15 C , SI 20 C , SI 25 C , SI 30 C , SI 35 C , SI 40 C , SI 45 C , SI 50 C , SI 60 C , SI 70 C , SI 80 C , SI 90 C , SI 100 C ,
SA 6 C , SA 8 C , SA 10 C , SA 12 C , SA 15 C , SA 20 C , SA 25 C , SA 30 C , SA 35 C , SA 40 C , SA 45 C , SA 50 C , SA 60 C , SA 70 C, SA 80 C , SA 90 C , SA 100 C ,
SI 6 ET – 2RS , SI 8 ET – 2RS , SI 10 ET – 2RS , SI 12 ET – 2RS , SI 15 ET – 2RS , SI 17 ET – 2RS , SI 20 ET – 2RS , SI 25 ET – 2RS , SI 30 ET – 2RS , SI 35 ET – 2RS , SI 40 ET – 2RS , SI 45 ET – 2RS , SI 50 ET -2RS , SI 60 ET – 2RS , SI 70 ET – 2RS , SI 80 ET – 2RS , SI 90 ET – 2RS , SI 100 ET – 2RS
SA6 ET – 2RS , SA8 ET – 2RS , SA10 ET – 2RS , SA 12 ET – 2RS , SA 15 ET – 2RS , SA 17 ET – 2RS , SA 20 ET – 2RS , SA 25 ET – 2
Mc cormick bmax (2007 ) - rt62 - 100 tractor service repair manualudjjjskkkdmm
This document provides part numbers and descriptions for components of an engine. It includes listings for various engine parts like pistons, rods, bearings, gaskets, plugs, pumps, housings, and other items. Each part includes information like the part number, description, kit or assembly it belongs to, and serial number ranges it applies to.
Massey ferguson mf 250 tractor (gb) service parts catalogue manual (part numb...fusjefjskekem
This document provides a parts list for engine installation on an MF 250 tractor. It includes 25 items related to the engine, listing the part numbers, quantities, descriptions, and additional comments. A second section lists 4 additional items for engine installation that are specific to South Africa. A third section provides details on 14 items related to the cylinder block.
The document discusses bearings for screw compressors made by NSK. It summarizes that NSK uses a fiberglass-reinforced L-PPS plastic cage that ensures chemical stability and improved lubricant flow around bearings. This cage material provides benefits like increased load capacity, axial load limit, and lubrication performance for screw compressor applications.
This document lists and describes various automotive tool sets including:
1. A 2-piece pliers set and 2-piece torque adapter set
2. A 3-piece step wrench set and 2-piece adjustable wrench set
3. Several 3-piece pliers sets, adjustable wrench sets, and other tool sets
4. The tools and components included in each set are described
This document provides specifications for replacement parts for a G-24 clutch, including part numbers for bushings, armatures, rotors, fields and other components for assemblies operating at 24V and 90V. Dimensions, tolerances and other technical data are given for taper bushings in various bore sizes. Ordering information is listed to specify the required components to assemble a clutch.
This document provides technical specifications for Sicme Motori's SM-ML series of steel mill heavy duty DC motors. It includes details on:
- Motor design features for frames 802-804 and 806-818, including laminated cores, roller bearings, and optional components.
- Output data like power, speed, torque, and duty ratings for each frame size at 230V.
- Dimensional drawings and specifications for frames 802-804 and 806-812.
- Air flow requirements, weights, enclosure types and other technical details for each frame size.
The SM-ML series motors are designed for variable speed drives in heavy industrial applications like steel mills. They meet
TorcStark® is a professional manufacturer and supplier of hydraulic equipment. Mainly produce hydraulic torque wrenches, hydraulic bolt tensioners, hydraulic torque/tensioner pumps and other products.
This document contains specifications and part numbers for bushings and other components for a G-26 clutch. It lists bore sizes and part numbers for taper bushings from 1/2" to 2" in diameter. It also provides an exploded diagram of replacement parts for the FC310152 clutch assembly and lists those individual parts along with their part numbers and quantities. The document is from Electromate and includes their contact information.
The Vortex Flowmeter Model AVF7000 Series is a versatile flowmeter that uses the Von Karman vortex shedding principle to measure volumetric flow. It has no moving parts and comes in various sizes from 10mm to 500mm with either flange or wafer connections. It provides local flow rate and total flow displays as well as standard 4-20mA output and can be configured for various applications including gases, steam, and liquids.
Dynacorp® manufactures shaft mounted brakes in five sizes from 4" to 10" for bearing mounting. The brakes use electromagnets to exert braking torque on a shaft. Technical specifications and part numbers are provided for each brake size, along with diagrams of typical components and replacement part numbers. Accessories like torque arms and conduit boxes are also available.
Massey ferguson mf 7252 combine parts catalogue manualfjjskqazxedmmem
This document provides a list of parts for the knives and fingers and table auger components for a Massey Ferguson 7250/7252 combine. It includes 141 line items specifying part numbers, quantities, descriptions, and other details for each component. The parts are organized into groups for the knives and fingers of different cutting widths ranging from 14 to 20 feet. It also provides parts for the table auger and auto-leveling system.
Massey ferguson mf 7250 combine parts catalogue manualfjjskqazxedmmem
This document provides a list of parts for the knives and fingers and table auger assemblies for a Massey Ferguson MF 7250/7252 combine. It includes 141 line items with part numbers, quantities, descriptions, and other identifying information for each component. The parts are organized by assembly (knives and fingers or table auger) and by combine header size ranging from 14 to 20 feet. Footnotes provide additional part number usage details.
This document provides specifications for various torque wrench sets and accessories. It includes 3-sentence summaries of each product:
The 9pc Wheel specialized torque tool set includes a 5-torque wrench, 3 impact sockets, and an assembly wheel nut wrench in various drive sizes and torque ranges.
The 11pc and 13pc Torque wrench sets include torque wrenches, flank sockets, and hex socket bits in 3/8" and 1/2" drive sizes with torque ranges from 10-21 Nm and 19-110 Nm respectively.
The Tone control torques wrench sets include preset torque wrenches in 1/4", 3/8", 1/2", 3
Sprinkler Repair Specialists
Our sprinkler builders have years of knowledge rebuilding and repairing all types of sprinklers and valves and are truly experts in their field. We have less than a 1% warranty return rate and we always go the extra mile to achieve 100% customer satisfaction.
SportsTurf Irrigation is a proud member of the GCSAA and we participate in local association scholarship events, fund-raisers, annual events and tournaments.
This document provides technical information about HERA® high-efficiency right angle drives. It begins with an overview of HERA® benefits such as up to 90% efficiency and energy savings compared to standard worm gear drives.
It then provides detailed selection information in 4 steps: 1) Use the power rating chart to select the appropriate basic HERA® model and ratio based on application horsepower, service factor, and output torque requirements. 2) Select the desired input type - C-face, coupled, or shaft input. 3) Select the required frame size. 4) Includes dimensional drawings and specifications for each HERA® model.
This document provides information on rebuilt and new parts for Toro sprinkler systems. It lists various conversion assemblies, drives, cases, valves, pistons, nozzles, caps, and tools that are available for different Toro sprinkler models. The parts are organized by the sprinkler series or component they apply to such as 630, 670, 730/750, 760/780, 830, and so on. Specifications like part numbers, colors, and Toro nozzle numbers are provided for many of the items.
Toggle clamp is a product using locking function guaranteed at the dead point of a linkage system of links and pins. It is very convenient to fix workpiece with one-touch when machining constant thickness of workpiece. Toggle clamp’s structure and operating method are simple and it provides high clamping force. Toggle clamp is widely used due to its convenience.
Massey ferguson mf 334 v tractor parts catalogue manualfjsjekkdmnem
This document provides parts information for the engine of a Massey Ferguson 334V tractor. It includes multiple sections detailing individual engine components like the cylinder block, crankshaft, pistons, cylinder head, rocker shaft, and timing gears. Each section lists the relevant parts, part numbers, quantities, and additional notes or comments. The document contains detailed technical specifications and exploded diagrams of the engine systems and components.
The document provides information on optocouplers from Avago Technologies for driving power devices such as IGBTs and MOSFETs. It summarizes the key specifications and features of models HCPL-3120, HCPL-J312, and HCNW3120. These optocouplers are suited for applications such as motor control inverters due to their high operating voltage range, output current ratings up to 2.5A, and insulation voltages up to 1414Vpeak. Diagrams and packaging details are also included.
Our sprinkler builders have years of knowledge rebuilding and repairing all types of sprinklers and valves and are truly experts in their field. We have less than a 1% warranty return rate and we always go the extra mile to achieve 100% customer satisfaction.
SportsTurf Irrigation is a proud member of the GCSAA and we participate in local association scholarship events, fund-raisers, annual events and tournaments.
we at vardhman bearings +91-9819824531 (whatsapp)
are manufacturers and exporters of all type of ball joints , tie rods , steering joints , ball studs , ball ends , rod end bearings , ball scoket joint , ball stud joint , ball angle joint , 180 degree ball joint , 90 degree ball joint , POS 3, POS 4 , POS 5 , POS 6 , POS 8 , POS 10 , POS 12 , POS 14 , POS 16 , POS 18 , POS 20 , POS 22 , POS 25 , POS 28 , POS 30 , POS 35 , POS 40 , POS 45 , POS 50 , POS 55 , POS 60 ,
SI 3 E , SI 4 E , SI 5 E , SI 6 E , SI 8 E , SI 10 E , SI 12 E , SI 15 E , SI 17 ES , SI 20 ES , SI 25 ES , SI 30 ES , SI 35 ES , SI 40 ES , SI 45 ES , SI 50 ES , SI 55 ES , SI 60 ES , SI 70 ES , SI 75 ES , SI 80 ES , SI 85 ES , SI 90 ES , SI 95 ES , SI 100 ES ,
SA 3 E , SA 4 E , SA 5 E , SA 6 E , SA 8E , SA 10 E , SA 12 E , SA 15 E , SA 17 ES , SA 20 ES , SA 25 ES , SA 30 ES , SA 35 ES , SA 40 ES , SA 45 ES , SA 50 ES , SA 55 ES , SA 60 ES , SA 65 ES , SA 70 ES , SA 75 ES , SA 80 ES , SA 85 ES , SA 90 ES , SA 95 ES , SA 100 ES ,
GIR 6 DO , GIR 8 DO , GIR 10 DO , GIR 12 DO , GIR 15 DO , GIR 17 DO , GIR 20 DO , GIR 25 DO , GIR 30 DO , GIR 35 DO , GIR 40 DO , GIR 45 DO , GIR 50 DO , GIR 60 DO , GIR 70 DO , GIR 80 DO , GIR 90 DO , GIR 100 DO
GAR 6 DO , GAR 8 DO , GAR 10 DO , GAR 12 DO , GAR 14 DO , GAR 16 DO , GAR 18 DO , GAR 20 DO , GAR 25 DO , GAR 30 DO , GAR 35 DO , GAR 40 DO , GAR 45 DO , GAR 50 DO , GAR 60 DO , GAR 70 DO , GAR 80 DO , GAR 90 DO , GAR 100 DO ,
GIR 6 DO – 2RS , GIR 8 DO -2RS , GIR 10 DO -2RS , GIR 12 DO -2RS , GIR 15 DO – 2RS , GIR 17 DO – 2RS , GIR 20 DO -2 RS , GIR 25 DO -2RS , GIR 30 DO – 2RS , GIR 35 DO -2RS , GIR 40 DO -2 RS , GIR 45 DO -2 RS , GIR 50 DO -2 RS , GIR 60 DO -2 RS , GIR 70 DO -2RS , GIR 80 DO -2 RS , GIR 90 DO -2 RS , GIR 100 DO -2RS
GAR 6 DO -2RS , GAR 8 DO -2RS , GAR 10 DO -2RS , GAR 12 DO -2 RS , GAR 14 DO -2 RS , GAR 16 DO -2RS , GAR 18 DO -2RS , GAR 20 DO -2RS , GAR 25 DO -2 RS , GAR 30 DO -2RS , GAR 35 DO -2RS , GAR 40 DO -2RS , GAR 45 DO -2 RS , GAR 50 DO -2 RS , GAR 60 DO -2RS , GAR 70 DO -2 RS , GAR 80 DO -2 RS , GAR 90 DO -2RS , GAR 100 DO -2RS ,
SI 6 C , SI 8 C , SI 10 C , SI 12 C , SI 15 C , SI 20 C , SI 25 C , SI 30 C , SI 35 C , SI 40 C , SI 45 C , SI 50 C , SI 60 C , SI 70 C , SI 80 C , SI 90 C , SI 100 C ,
SA 6 C , SA 8 C , SA 10 C , SA 12 C , SA 15 C , SA 20 C , SA 25 C , SA 30 C , SA 35 C , SA 40 C , SA 45 C , SA 50 C , SA 60 C , SA 70 C, SA 80 C , SA 90 C , SA 100 C ,
SI 6 ET – 2RS , SI 8 ET – 2RS , SI 10 ET – 2RS , SI 12 ET – 2RS , SI 15 ET – 2RS , SI 17 ET – 2RS , SI 20 ET – 2RS , SI 25 ET – 2RS , SI 30 ET – 2RS , SI 35 ET – 2RS , SI 40 ET – 2RS , SI 45 ET – 2RS , SI 50 ET -2RS , SI 60 ET – 2RS , SI 70 ET – 2RS , SI 80 ET – 2RS , SI 90 ET – 2RS , SI 100 ET – 2RS
SA6 ET – 2RS , SA8 ET – 2RS , SA10 ET – 2RS , SA 12 ET – 2RS , SA 15 ET – 2RS , SA 17 ET – 2RS , SA 20 ET – 2RS , SA 25 ET – 2
Mc cormick bmax (2007 ) - rt62 - 100 tractor service repair manualudjjjskkkdmm
This document provides part numbers and descriptions for components of an engine. It includes listings for various engine parts like pistons, rods, bearings, gaskets, plugs, pumps, housings, and other items. Each part includes information like the part number, description, kit or assembly it belongs to, and serial number ranges it applies to.
Massey ferguson mf 250 tractor (gb) service parts catalogue manual (part numb...fusjefjskekem
This document provides a parts list for engine installation on an MF 250 tractor. It includes 25 items related to the engine, listing the part numbers, quantities, descriptions, and additional comments. A second section lists 4 additional items for engine installation that are specific to South Africa. A third section provides details on 14 items related to the cylinder block.
The document discusses bearings for screw compressors made by NSK. It summarizes that NSK uses a fiberglass-reinforced L-PPS plastic cage that ensures chemical stability and improved lubricant flow around bearings. This cage material provides benefits like increased load capacity, axial load limit, and lubrication performance for screw compressor applications.
This document lists and describes various automotive tool sets including:
1. A 2-piece pliers set and 2-piece torque adapter set
2. A 3-piece step wrench set and 2-piece adjustable wrench set
3. Several 3-piece pliers sets, adjustable wrench sets, and other tool sets
4. The tools and components included in each set are described
This document provides specifications for replacement parts for a G-24 clutch, including part numbers for bushings, armatures, rotors, fields and other components for assemblies operating at 24V and 90V. Dimensions, tolerances and other technical data are given for taper bushings in various bore sizes. Ordering information is listed to specify the required components to assemble a clutch.
This document provides technical specifications for Sicme Motori's SM-ML series of steel mill heavy duty DC motors. It includes details on:
- Motor design features for frames 802-804 and 806-818, including laminated cores, roller bearings, and optional components.
- Output data like power, speed, torque, and duty ratings for each frame size at 230V.
- Dimensional drawings and specifications for frames 802-804 and 806-812.
- Air flow requirements, weights, enclosure types and other technical details for each frame size.
The SM-ML series motors are designed for variable speed drives in heavy industrial applications like steel mills. They meet
TorcStark® is a professional manufacturer and supplier of hydraulic equipment. Mainly produce hydraulic torque wrenches, hydraulic bolt tensioners, hydraulic torque/tensioner pumps and other products.
This document contains specifications and part numbers for bushings and other components for a G-26 clutch. It lists bore sizes and part numbers for taper bushings from 1/2" to 2" in diameter. It also provides an exploded diagram of replacement parts for the FC310152 clutch assembly and lists those individual parts along with their part numbers and quantities. The document is from Electromate and includes their contact information.
The Vortex Flowmeter Model AVF7000 Series is a versatile flowmeter that uses the Von Karman vortex shedding principle to measure volumetric flow. It has no moving parts and comes in various sizes from 10mm to 500mm with either flange or wafer connections. It provides local flow rate and total flow displays as well as standard 4-20mA output and can be configured for various applications including gases, steam, and liquids.
Dynacorp® manufactures shaft mounted brakes in five sizes from 4" to 10" for bearing mounting. The brakes use electromagnets to exert braking torque on a shaft. Technical specifications and part numbers are provided for each brake size, along with diagrams of typical components and replacement part numbers. Accessories like torque arms and conduit boxes are also available.
Massey ferguson mf 7252 combine parts catalogue manualfjjskqazxedmmem
This document provides a list of parts for the knives and fingers and table auger components for a Massey Ferguson 7250/7252 combine. It includes 141 line items specifying part numbers, quantities, descriptions, and other details for each component. The parts are organized into groups for the knives and fingers of different cutting widths ranging from 14 to 20 feet. It also provides parts for the table auger and auto-leveling system.
Massey ferguson mf 7250 combine parts catalogue manualfjjskqazxedmmem
This document provides a list of parts for the knives and fingers and table auger assemblies for a Massey Ferguson MF 7250/7252 combine. It includes 141 line items with part numbers, quantities, descriptions, and other identifying information for each component. The parts are organized by assembly (knives and fingers or table auger) and by combine header size ranging from 14 to 20 feet. Footnotes provide additional part number usage details.
Massey ferguson mf 7250 combine parts catalogue manualhhfjksekmm
This document provides a list of parts for the knives and fingers and table auger components for a Massey Ferguson MF 7250/7252 combine. It includes 141 line items with part numbers, quantities, descriptions, and other identifying information for each part. The parts are organized by component and include knives and fingers for cutting platforms ranging from 14 to 20 feet, as well as parts for the table auger on the right side of the combine.
Massey ferguson mf 7252 combine parts catalogue manualhhfjksekmm
This document provides a list of parts for the knives and fingers and table auger components for a Massey Ferguson MF 7250/7252 combine. It includes 141 line items with part numbers, quantities, descriptions, and other identifying information for each part. The parts are organized by component and include knives and fingers for cutting platforms ranging from 14 to 20 feet, as well as parts for the table auger on the right side of the combine.
Kuhn compacmaster fixed chamber baler with integrated wrapperPartCatalogs Net
This document contains a parts list for the lower chamber section of a compactor machine. It lists 17 parts needed including spacers, washers, bolts, screws, nuts, bearings, plates, and locks. Quantities and part numbers are provided for each component.
Mc cormick x7.6 tier 4i (2013 ) - rpe2 - x7.660 tractor service repair manualfjsqazkekdmme
This document contains parts lists and diagrams for components of an engine. It lists part numbers, descriptions, quantities and references other documents. Key components listed include cylinders, pistons, rods, bearings, valves, heads and manifolds. Accompanying diagrams show the assembly and placement of components within the engine.
The document discusses various hydraulic components including motors, gearboxes, winches, and track undercarriages. It provides specifications for multiple models of hydraulic motors, gearboxes, and winches. The models listed include the GN, NAM, LA2FE, and LA2FM series of hydraulic motors, the BFT series of track drives, KFB series of swing drives, and BFT-W series of winch drives.
Mc cormick x7.6 tier 4i (2013 ) - rpe2 - x7.660 tractor service repair manualregdfcgvdgvf
This document contains parts lists and diagrams for engine components. It lists various engine parts like pistons, rods, bearings, gaskets, plugs, dowel pins, screws, nuts and other hardware. Each part is identified by reference number, name, and often additional specifications. The document provides replacement part numbers and indicates when parts are components of larger assemblies.
Mc cormick x7.6 tier 4i (2013 ) - rpe2 - x7.660 tractor service repair manualfujsjefjwerkskemm
This document contains parts lists and diagrams for engine components. It lists various engine parts like pistons, rods, bearings, gaskets, plugs, dowel pins, screws, nuts and other hardware. Each part is identified by reference number, name, and often additional specifications. The document provides replacement part numbers and indicates when parts are components of larger assemblies.
Mc cormick x7.6 tier 4i (2013 ) - rpe2 - x7.660 tractor service repair manualufjjsjefkkeskmd
This document contains parts lists and diagrams for engine components. It lists various engine parts like pistons, rods, bearings, gaskets, plugs, dowel pins, screws, nuts and other hardware. Each part is identified by reference number, name, and often additional specifications. The document provides replacement part numbers and indicates when parts are components of larger assemblies.
Mc cormick x7.6 tier 4i (2013 ) - rpe2 - x7.660 tractor service repair manualfisejfjksekmm
This document contains parts lists and diagrams for engine components. It lists various engine parts like pistons, rods, bearings, gaskets, plugs, dowel pins, screws, nuts and other hardware. Each part is identified by reference number, name, and often additional specifications. The document provides replacement part numbers and indicates when parts are components of larger assemblies.
Mc cormick x7.6 tier 4i (2013 ) - rpe2 - x7.660 tractor service repair manualudfjjdjkskkem
This document contains parts lists and diagrams for engine components. It lists various engine parts like pistons, rods, bearings, gaskets, plugs, dowel pins, screws, nuts and other hardware. Each part is identified by reference number, name, and often additional specifications. The document provides replacement part numbers and indicates when parts are components of larger assemblies.
Mc cormick x7.6 tier 4i (2013 ) - rpe2 - x7.670 tractor service repair manualfjsqazkekdmme
This document contains parts lists and diagrams for components of an engine. It lists part numbers, descriptions, quantities and references other documents for several engine components including the crankcase, cylinder head, valves, pistons, flywheel and other internal engine parts. Flexibility and tier specifications are provided for some components.
1) O documento discute o uso de bombas de fusos na indústria de petróleo e gás, especificamente para transporte de petróleo cru, água e fluidos multifásicos.
2) Bombas Leistritz são usadas globalmente nesta indústria, operando em diversas aplicações como FPSOs, oleodutos e refinarias.
3) O documento fornece detalhes sobre projetos específicos onde bombas Leistritz são usadas, incluindo um campo de petróleo na Argélia.
This document provides specifications and information on positive displacement pumps and oil-free gas compressors manufactured by Blackmer for liquid carbon dioxide applications. It describes the key design features of Blackmer pumps that allow them to efficiently handle dry, non-lubricating CO2 at sub-zero temperatures, including replaceable liners and end discs, mechanical seals, and self-adjusting vanes. Performance curves and specifications are provided for various pump and compressor models with capacities ranging from 5 to 300 gallons per minute and 4 to 63 cubic feet per minute, respectively.
O documento descreve a bomba dosadora EXCEL XR da LMI, projetada para fornecer precisão e confiabilidade no controle químico de processos. A bomba possui recursos avançados de interface e controle, além de ser flexível para diferentes aplicações industriais e de tratamento de água. A LMI oferece suporte global para garantir o desempenho e longevidade da bomba.
Este documento fornece instruções sobre instalação, calibração e manutenção de bombas dosadoras. Ele discute características dos modelos, especificações técnicas, instalação correta, procedimentos de calibração, solução de problemas comuns e substituição periódica de peças como válvulas, diafragmas e selos.
A VIBROPAC busca ampliar sua gama de produtos com a bomba dosadora P+, que irá atender necessidades de dosagem química em tratamento de água, torres de resfriamento e caldeiras, entre outros. A P+ possui design robusto, indicador de operação, é compacta e ideal para aplicações OEM, com vantagens como válvula dupla e diferentes modelos de acionamento e cabeçotes. A VIBROPAC oferece serviços de instalação, comissionamento, treinamento e manutenção para bombas dosadoras P+.
Este documento fornece um resumo da empresa Vibropac, que oferece sistemas de bombeamento, tratamento de fluidos e preparação de polímeros. A empresa possui duas unidades de negócios focadas em óleo e gás e águas e efluentes, fornecendo uma variedade de equipamentos como bombas, compressores, preparadores de polímero e sistemas de tratamento de água.
The document summarizes Primeroyal metering pumps from Milton Roy. It describes how the pumps are designed with modular frames and liquid ends to meet a variety of application needs. Key features highlighted include variable eccentric gear mechanisms for precise flow control, multiple liquid end options for different pressure and chemical requirements, and modular configurations that allow for simplex, duplex or triplex pump arrangements. The document also lists typical industries and chemicals the pumps are used for.
EKATO FLUID manufactures custom-built industrial agitators with short lead times and competitive prices. Their agitators are available with shaft diameters ranging from 25mm to 100mm and impeller diameters from 125mm to 2500mm. All wetted parts are stainless steel 316Ti and agitators can operate at pressures up to 7 bar and temperatures up to 200°C. EKATO FLUID ensures maximum safety through ATEX certification and quality management certified to DIN ISO 9001.
This document provides information on the Flexiprene 4-Function Valve including its functions of anti-syphon, back pressure, priming/pressure release, and pressure relief. It describes the materials of construction, part numbers, and includes an instruction sheet on priming the pump and depressurizing the discharge line.
Data Communication and Computer Networks Management System Project Report.pdfKamal Acharya
Networking is a telecommunications network that allows computers to exchange data. In
computer networks, networked computing devices pass data to each other along data
connections. Data is transferred in the form of packets. The connections between nodes are
established using either cable media or wireless media.
Update 40 models( Solar Cell ) in SPICE PARK(JUL2024)
Bomba Dosadora Milroyal B
1. MilRoyalB
1
Milroyal B
PD 3641
Effective 6/2009
MilRoyalB
1
Milroyal B
PD 3641
Effective
Milroyal
B Pumps
GENERAL SPECIFICATIONS
Drive
Polar Crank Design — all moving parts
submerged in oil. Front end scavenging—
the plunger always set to top dead center on
each stroke.
Liquid Ends Available
High Performance Diaphragm (HPD)
Packed Plunger
Disc Diaphragm
Accuracy
±1.0% over 10:1 turndown ratio
Maximum Performance Ratings (per head)
1.1 gph (4.2 l/hr) @ 10,000 psig (689 bar) to
626 gph (2370 l/hr) @ 75 psig (5 bar)
Capacity Control
Manual Micrometer (std)
Electronic, Pneumatic, or Variable Speed (opt)
Multiplexing
Up to 8 pumps driven by one motor. (Limited
to total of 10 HP.) Consult Applications
Engineering concerning capabilities for specific
application.
Weight (simplex)
Approximate shipping weight is 250–600 lbs.
(113–272 kg), depending on liquid end selected.
Milroyal B Simplex with HPD Liquid End
(shown with optional flanges)
Milroyal B Triplex with leak detection
9. MilRoyalB
9
Milroyal B
PD 3641
Effective 6/2009
MAXIMUM ALLOWABLE SUCTION PRESSURE RANGE — Packed Plunger
Plunger Diameter Standard Mid Range High Range
in. mm PSIG Bar PSIG Bar PSIG Bar
5⁄16″ 08 1180 81 2120 146 2750 190
7⁄16″ 11 660 46 1130 78 1450 100
5⁄8″ 16 360 25 590 41 750 52
7⁄8″ 22 208 14 330 23 410 28
11⁄8″ 28 142 10 215 15 265 18
11⁄2″ 38 94 6 135 9 165 11
1¾″ 44 75 5 104 7 125 9
21⁄2″ 64 46 3 60 4 70 5
Pressure
Plunger
Diameter
E F G H
in. mm in. mm in. mm in. mm in.
5⁄16″ 08 3″ 76 3″ 76 41⁄4″ 108 ½″
7⁄16″ 11 3″ 76 3″ 76 41⁄4″ 108 ½″
5⁄8″ 16 3″ 76 3″ 76 41⁄4″ 108 ½″
0-4999 PSIG 7⁄8″ 22 31⁄2″ 89 31⁄2″ 89 41⁄4″ 108 1″
(0-344 BAR) 11⁄8″ 28 39⁄16″ 90 39⁄16″ 90 4″ 102 1″
1½″ 38 47⁄16″ 113 47⁄16″ 113 4″ 102 1¼″
13⁄4″ 44 47⁄16″ 113 47⁄16″ 113 4″ 102 1¼″
2½″ 64 73⁄8″ 187 73⁄8″ 187 71⁄2″ 184 2½″
5000+ PSIG 5⁄16″ 08 35⁄16″ 84 35⁄16″ 84 41⁄2″ 114 ¾″
(345+ BAR) 7⁄16″ 11 35⁄16″ 84 35⁄16″ 84 41⁄2″ 114 ¾″
Packed Plunger LIQUID END DIMENSIONS*
10. MilRoyalB
10
Milroyal B
PD 3641
Effective 6/2009
PACKED PLUNGER LIQUID END MODEL CODE
NOTES:
* Plunger Diameter Codes AF and AH are available in 316 SS only and are for applications requiring pressures over 5000 psi.
† Refer to suction pressure table for suction pressure vs. range.
‡ Flange sizes equal the NPT connection size as noted on the liquid end drawing.
§ The plunger material will automatically match the liquid end material when selecting packing/plunger material code TM.
** Select packing lube GF with packing codes TM NM. Contact Applications Engineering for other packing lube selection.
†† Packing code NM is a standard option for 316 SS liquid ends with plunger diameters of 11⁄8″ through 21⁄2″ plungers.
‡‡ Packing/plunger codes AL, TL, VL are offered on 316 SS liquid ends with 5⁄16″ through 7⁄8″ plunger diameters.
§§ Packing/plunger codes AR, TR, VR are offered on 316 SS liquid ends with 5⁄16″ or 7⁄16″ high pressure plunger diameters.
M PB
End Item Model Code Option Select Number
Plunger Diameter
05 = 5
⁄16″
AF = 5
⁄16″ High Press.*
07 = 7
⁄16″
AH = 7
⁄16″ High Press.*
10 = 5
⁄8″
14 = 7
⁄8″
18 = 11
⁄8″
24 = 11
⁄2″
28 = 13
⁄4″
40 = 21
⁄2″
Liquid End Material
1 = 316 SS
5 = Alloy 20
Crosshead Material/
Suction Pressure
Range†
ST = Steel/Std. Range
11 = 316 SS/Std. Range
H2 = Steel/Mid Range
HS = 316 SS/Mid Range
H3 = Steel/High Range
Motor Mount
AA = None
Flange Mount
CB = Nema 56C
CC = Nema 143TC, 145TC
CD = Nema 182TC, 184TC
CE = Nema 213TC, 215TC
Metric Mount, B5 Flange
MC = IEC 71
MD = IEC 80
ME = IEC 90
MF = IEC 100
Foot Mount
FJ = Nema 56
FK = Nema 143T
FL = Nema 145T
FN = Nema 182T, 184T
Connections‡
SE = NPT
T1 = ANSI 150 lb. threaded
T3 = ANSI 300 lb. threaded
T6 = ANSI 600 lb. threaded
T9 = ANSI 900 lb. threaded
S1 = ANSI 150 lb. socket weld
S3 = ANSI 300 lb. socket weld
S6 = ANSI 600 lb. socket weld
S9 = ANSI 1500 lb. socket weld
Base
11 = Simplex
22 = Duplex
33 = Triplex
NN = None
Gear/Shaft
Single Shaft
8F = 12.3:1
8G = 15.5:1
8H = 18.5:1
8J = 25:1
8K = 36:1
Double Shaft
8A = 12.3:1
8B = 15.5:1
8C = 18.5:1
8D = 25:1
8E = 36:1
Capacity
Adjustment
Manual
M4 = Micrometer 304 SS
Electronic,
4–20 mA Input
E1 = Nema 4, 115 V
E2 = Nema 4, 230 V
EA = Exp. Pr., 115 V
EB = Exp. Pr., 230 V
Pneumatic
PN = 3–15 PSI
Packing Lube**
GF = Grease Fitting
IF = Internal Flush
TF = Through Flush
LR = Oiler
NN = None
Code Description Type Plunger PSI Range* Plunger Materials Oiler
range Suggested?
TM Teflon Braid 5022 AFP Compression- 5⁄16″ to 316ss or A 20
User adjust 7⁄8″ (Same as Liquid end)
BC Teflon Braid 5022 AFP required 11
⁄8
″ to 2.5″ 0 to 1500 Ceramic No
NM Nitrile Fabric
V-Ring
11⁄8″ to 2.5″ 316 ss
NR Nitrile Fabric 11⁄8″ to 2.5″ Ceramic
Spring load 5⁄16″ to
0 to 10,000* Ceramic Yes
TR Teflon
self adjust 7⁄8″
Packing/Plunger Material
11. MilRoyalB
11
Milroyal B
PD 3641
Effective 6/2009
HPD MATERIALS OF CONSTRUCTION — WETTED PARTS
Materials of
Construction Diaphragm
Diaphragm
Head
Port
Connection Ball Seat (3) Ball Check (3)
Ball
Guide
316 SS* PTFE/Elastomer
316 SS
CF-8M‡
316 SS
CF-8M‡
316 SS 316 SS
316 SS
CF-8M‡
Alloy 20* PTFE/Elastomer
20Cb-3
CN-7M
20Cb-3
CN-7M
20Cb-3 20Cb-3
20Cb-3
CN-7M
Plastic* PTFE/Elastomer PVC PVC PVC Ceramic PVC
Alloy C22* PTFE/Elastomer
Alloy C22
CX2MW†
Alloy C22
CX2MW†
Alloy C22 Alloy C276
Alloy C22
CX2MW†
NOTES:
* Temperature range for metallic versions is 10°F (−12°C) to 190°F (88°C) standard, optional to 225°F (107°C), special to 300°F
(149°C). Temperature range for plastic versions is 10°F (−12°C) to 140°F (60°C).
‡ CF-8M is the cast equivalent to wrought 316 SS.
§ CN-7M is the cast equivalent to wrought 20CB-3.
† CX2MW is the cast equivalent to wrought Alloy C22.
DISC DIAPHRAGM MATERIALS OF CONSTRUCTION — WETTED PARTS
Materials of
Construction
Diaphragm
Head
Cartridge
Body Seats Balls
Limit
Pins Diaphragm
Contour
Plate
316 SS†
316 SS
CF-8M‡
316 SS
CF-8M‡
316 SS 316 SS 316 SS PTFE
316 SS
CF-8M‡
Alloy 20†
20Cb-3
CN-7M
20Cb-3
CN-D7M
20Cb-3 20Cb-3 20Cb-3 PTFE
20Cb-3
CN-7M
Plastic Acrylic Plastic* PVC PVC Ceramic Alloy C PTFE (none)
NOTES:
* Diaphragm head is polypropylene on plastic 2½″.
† Maximum temperature for metallic liquid ends is 250°F (121°C). Maximum temperature for plastic liquid ends is 140°F (60°C).
‡ CF-8M is the cast equivalent to wrought 316 SS.
§ CN-7M is the cast equivalent to wrought 20CB-3.
PACKED PLUNGER MATERIALS OF CONSTRUCTION — WETTED PARTS
Liquid
End
Material
Plunger Check
Valve
Seat Seat
Seal
Ball
Lantern
Ring/
Spacers
Packing
Spring
Gland
Cap
316 SS
316 SS
(to 1500 psi)
316 SS
CF-8M*
316 SS PTFE 316 SS
316 SS
CF-8M*
N/A
316 SS
CF-8M*
Colmonoy
(to 5000 psi)
316 SS
CF-8M*
316 SS PTFE 316 SS
316 SS
CF-8M*
316 SS
316 SS
CF-8M*
Carbide
(to 10,000 psi)
316 SS
CF-8M*
Hardened
13-8 Mo
PTFE Carbide
316 SS
CF-8M*
316 SS
316 SS
CF-8M*
Alloy 20
20Cb-3
(to 1500 psi)
20Cb-3
CN-7M†
20Cb-3 PTFE 20Cb-3
20Cb-3
CN-7M†
N/A
20Cb-3
CN-7M†
NOTES:
* CF-8M is the cast equivalent to wrought 316 SS.
† CN-7M is the cast equivalent to wrought 20CB-3.