-
Development of the MICROMEGAS Detector for Measuring the Energy Spectrum of Alpha Particles by using a 241-Am Source
Authors:
Do Yoon Kim,
Cheolmin Ham,
Jae Won Shin,
Tae-Sun Park,
Seung-Woo Hong,
Samuel Andriamonje,
Yacine Kadi,
Claudio Tenreiro
Abstract:
We have developed MICROMEGAS (MICRO MEsh GASeous) detectors for detecting α particles emitted from an 241-Am standard source. The voltage applied to the ionization region of the detector is optimized for stable operation at room temperature and atmospheric pressure. The energy of α particles from the 241-Am source can be varied by changing the flight path of the α particle from the 241 Am source.…
▽ More
We have developed MICROMEGAS (MICRO MEsh GASeous) detectors for detecting α particles emitted from an 241-Am standard source. The voltage applied to the ionization region of the detector is optimized for stable operation at room temperature and atmospheric pressure. The energy of α particles from the 241-Am source can be varied by changing the flight path of the α particle from the 241 Am source. The channel numbers of the experimentally-measured pulse peak positions for different energies of the α particles are associated with the energies deposited by the alpha particles in the ionization region of the detector as calculated by using GEANT4 simulations; thus, the energy calibration of the MICROMEGAS detector for α particles is done. For the energy calibration, the thickness of the ionization region is adjusted so that α particles may completely stop in the ionization region and their kinetic energies are fully deposited in the region. The efficiency of our MICROMEGAS detector for α particles under the present conditions is found to be ~ 97.3 %.
△ Less
Submitted 3 May, 2016;
originally announced May 2016.
-
Measurement and analysis of the Am-243 neutron capture cross section at the n_TOF facility at CERN
Authors:
n_TOF Collaboration,
:,
E. Mendoza,
D. Cano-Ott,
C. Guerrero,
E. Berthoumieux,
U. Abbondanno,
G. Aerts,
F. Alvarez-Velarde,
S. Andriamonje,
J. Andrzejewski,
P. Assimakopoulos,
L. Audouin,
G. Badurek,
J. Balibrea,
P. Baumann,
F. Becvar,
F. Belloni,
F. Calvino,
M. Calviani,
R. Capote,
C. Carrapico,
A. Carrillo de Albornoz,
P. Cennini,
V. Chepel
, et al. (108 additional authors not shown)
Abstract:
Background:The design of new nuclear reactors and transmutation devices requires to reduce the present neutron cross section uncertainties of minor actinides. Purpose: Reduce the $^{243}$Am(n,$γ$) cross section uncertainty. Method: The $^{243}$Am(n,$γ$) cross section has been measured at the n_TOF facility at CERN with a BaF$_{2}$ Total Absorption Calorimeter, in the energy range between 0.7 eV an…
▽ More
Background:The design of new nuclear reactors and transmutation devices requires to reduce the present neutron cross section uncertainties of minor actinides. Purpose: Reduce the $^{243}$Am(n,$γ$) cross section uncertainty. Method: The $^{243}$Am(n,$γ$) cross section has been measured at the n_TOF facility at CERN with a BaF$_{2}$ Total Absorption Calorimeter, in the energy range between 0.7 eV and 2.5 keV. Results: The $^{243}$Am(n,$γ$) cross section has been successfully measured in the mentioned energy range. The resolved resonance region has been extended from 250 eV up to 400 eV. In the unresolved resonance region our results are compatible with one of the two incompatible capture data sets available below 2.5 keV. The data available in EXFOR and in the literature has been used to perform a simple analysis above 2.5 keV. Conclusions: The results of this measurement contribute to reduce the $^{243}$Am(n,$γ$) cross section uncertainty and suggest that this cross section is underestimated up to 25% in the neutron energy range between 50 eV and a few keV in the present evaluated data libraries.
△ Less
Submitted 4 December, 2014;
originally announced December 2014.
-
$^{62}$Ni($n,γ$) and $^{63}$Ni($n,γ$) cross sections measured at n_TOF/CERN
Authors:
C. Lederer,
C. Massimi,
E. Berthoumieux,
N. Colonna,
R. Dressler,
C. Guerrero,
F. Gunsing,
F. Käppeler,
N. Kivel,
M. Pignatari,
R. Reifarth,
D. Schumann,
A. Wallner,
S. Altstadt,
S. Andriamonje,
J. Andrzejewski,
L. Audouin,
M. Barbagallo,
V. Becares,
F. Becvar,
F. Belloni,
B. Berthier,
J. Billowes,
V. Boccone,
D. Bosnar
, et al. (90 additional authors not shown)
Abstract:
The cross section of the $^{62}$Ni($n,γ$) reaction was measured with the time-of-flight technique at the neutron time-of-flight facility n_TOF at CERN. Capture kernels of 42 resonances were analyzed up to 200~keV neutron energy and Maxwellian averaged cross sections (MACS) from $kT=5-100$ keV were calculated. With a total uncertainty of 4.5%, the stellar cross section is in excellent agreement wit…
▽ More
The cross section of the $^{62}$Ni($n,γ$) reaction was measured with the time-of-flight technique at the neutron time-of-flight facility n_TOF at CERN. Capture kernels of 42 resonances were analyzed up to 200~keV neutron energy and Maxwellian averaged cross sections (MACS) from $kT=5-100$ keV were calculated. With a total uncertainty of 4.5%, the stellar cross section is in excellent agreement with the the KADoNiS compilation at $kT=30$ keV, while being systematically lower up to a factor of 1.6 at higher stellar temperatures. The cross section of the $^{63}$Ni($n,γ$) reaction was measured for the first time at n_TOF. We determined unresolved cross sections from 10 to 270 keV with a systematic uncertainty of 17%. These results provide fundamental constraints on $s$-process production of heavier species, especially the production of Cu in massive stars, which serve as the dominant source of Cu in the solar system.
△ Less
Submitted 19 March, 2014;
originally announced March 2014.
-
New developments in Micromegas Microbulk detectors
Authors:
F. J. Iguaz,
S. Andriamonje,
F. Belloni,
E. Berthoumieux,
M. Calviani,
T. Dafni,
R. De Oliveira,
E. Ferrer-Ribas,
J. Galán,
J. A. García,
I. Giomataris,
C. Guerrero,
F. Gunsing,
D. C. Herrera,
I. G. Irastorza,
T. Papaevangelou,
A. Rodríguez,
A. Tomás
Abstract:
A new Micromegas manufacturing technique, based on kapton etching technology, has been recently developed, improving the uniformity and stability of this kind of readouts. Excellent energy resolutions have been obtained, reaching 11% FWHM for the 5.9 keV photon peak of 55Fe source and 1.8% FWHM for the 5.5 MeV alpha peak of the 241Am source. The new detector has other advantages like its flexible…
▽ More
A new Micromegas manufacturing technique, based on kapton etching technology, has been recently developed, improving the uniformity and stability of this kind of readouts. Excellent energy resolutions have been obtained, reaching 11% FWHM for the 5.9 keV photon peak of 55Fe source and 1.8% FWHM for the 5.5 MeV alpha peak of the 241Am source. The new detector has other advantages like its flexible structure, low material and high radio-purity. The two actual approaches of this technique will be described and the features of these readouts in argon-isobutane mixtures will be presented. Moreover, the low material present in the amplification gap makes these detectors approximate the Rose and Korff model for the avalanche amplification, which will be discussed for the same type of mixtures. Finally, we will present several applications of the microbulk technique.
△ Less
Submitted 12 October, 2011;
originally announced October 2011.
-
Search for 14.4 keV solar axions emitted in the M1-transition of 57Fe nuclei with CAST
Authors:
CAST Collaboration,
S. Andriamonje,
S. Aune,
D. Autiero,
K. Barth,
A. Belov,
B. Beltrán,
H. Bräuninger,
J. M. Carmona,
S. Cebrián,
J. I. Collar,
T. Dafni,
M. Davenport,
L. Di Lella,
C. Eleftheriadis,
J. Englhauser,
G. Fanourakis,
E. Ferrer-Ribas,
H. Fischer,
J. Franz,
P. Friedrich,
T. Geralis,
I. Giomataris,
S. Gninenko,
H. Gómez
, et al. (36 additional authors not shown)
Abstract:
We have searched for 14.4 keV solar axions or more general axion-like particles (ALPs), that may be emitted in the M1 nuclear transition of 57Fe, by using the axion-to-photon conversion in the CERN Axion Solar Telescope (CAST) with evacuated magnet bores (Phase I). From the absence of excess of the monoenergetic X-rays when the magnet was pointing to the Sun, we set model-independent constraints…
▽ More
We have searched for 14.4 keV solar axions or more general axion-like particles (ALPs), that may be emitted in the M1 nuclear transition of 57Fe, by using the axion-to-photon conversion in the CERN Axion Solar Telescope (CAST) with evacuated magnet bores (Phase I). From the absence of excess of the monoenergetic X-rays when the magnet was pointing to the Sun, we set model-independent constraints on the coupling constants of pseudoscalar particles that couple to two photons and to a nucleon g_{aγ} |-1.19 g_{aN}^{0}+g_{aN}^{3}|<1.36\times 10^{-16} GeV^{-1} for m_{a}<0.03 eV at the 95% confidence level.
△ Less
Submitted 4 December, 2009; v1 submitted 24 June, 2009;
originally announced June 2009.
-
Search for solar axion emission from 7Li and D(p,gamma)3He nuclear decays with the CAST gamma-ray calorimeter
Authors:
CAST Collaboration,
S. Andriamonje,
S. Aune,
D. Autiero,
K. Barth,
A. Belov,
B. Beltran,
H. Brauninger,
J. M. Carmona,
S. Cebrian,
J. I. Collar,
T. Dafni,
M. Davenport,
L. Di. Lella,
C. Eleftheriadis,
J. Englhauser,
G. Fanourakis,
E. Ferrer. Ribas,
H. Fischer,
J. Franz,
P. Friedrich,
T. Geralis,
I. Giomataris,
S. Gninenko,
H. Gomez
, et al. (36 additional authors not shown)
Abstract:
We present the results of a search for a high-energy axion emission signal from 7Li (0.478 MeV) and D(p,gamma)3He (5.5 MeV) nuclear transitions using a low-background gamma-ray calorimeter during Phase I of the CAST experiment. These so-called "hadronic axions" could provide a solution to the long-standing strong-CP problem and can be emitted from the solar core from nuclear M1 transitions. This…
▽ More
We present the results of a search for a high-energy axion emission signal from 7Li (0.478 MeV) and D(p,gamma)3He (5.5 MeV) nuclear transitions using a low-background gamma-ray calorimeter during Phase I of the CAST experiment. These so-called "hadronic axions" could provide a solution to the long-standing strong-CP problem and can be emitted from the solar core from nuclear M1 transitions. This is the first such search for high-energy pseudoscalar bosons with couplings to nucleons conducted using a helioscope approach. No excess signal above background was found.
△ Less
Submitted 6 March, 2010; v1 submitted 14 April, 2009;
originally announced April 2009.
-
A novel large-volume Spherical Detector with Proportional Amplification read-out
Authors:
I. Giomataris,
I. Irastorza,
I. Savvidis,
S. Andriamonje,
S. Aune,
M. Chapelier,
Ph. Charvin,
P. Colas,
J. Derre,
E. Ferrer,
M. Gros,
X. F. Navick,
P. Salin,
J. D. Vergados
Abstract:
A new type of radiation detector based on a spherical geometry is presented. The detector consists of a large spherical gas volume with a central electrode forming a radial electric field. Charges deposited in the conversion volume drift to the central sensor where they are amplified and collected. We introduce a small spherical sensor located at the center acting as a proportional amplification…
▽ More
A new type of radiation detector based on a spherical geometry is presented. The detector consists of a large spherical gas volume with a central electrode forming a radial electric field. Charges deposited in the conversion volume drift to the central sensor where they are amplified and collected. We introduce a small spherical sensor located at the center acting as a proportional amplification structure. It allows high gas gains to be reached and operates in a wide range of gas pressures. Signal development and the absolute amplitude of the response are consistent with predictions. Sub-keV energy threshold with good energy resolution is achieved. This new concept has been proven to operate in a simple and robust way and allows reading large volumes with a single read-out channel. The detector performance presently achieved is already close to fulfill the demands of many challenging projects from low energy neutrino physics to dark matter detection with applications in neutron, alpha and gamma spectroscopy.
△ Less
Submitted 17 July, 2008;
originally announced July 2008.
-
The Micromegas detector of the CAST experiment
Authors:
P. Abbon,
S. Andriamonje,
S. Aune,
T. Dafni,
M. Davenport,
E. Delagnes,
R. de Oliveira,
G. Fanourakis,
E. Ferrer Ribas,
J. Franz,
T. Geralis,
M. Gros,
Y. Giomataris,
I. G. Irastorza,
K. Kousouris,
J. Morales,
T. Papaevangelou,
J. Ruz,
K. Zachariadou,
K. Zioutas
Abstract:
A low background Micromegas detector has been operating in the CAST experiment at CERN for the search of solar axions during the first phase of the experiment (2002-2004). The detector, made out of low radioactivity materials, operated efficiently and achieved a very low level of background rejection (5 x 10^-5 counts/keV/cm^2/s) without shielding.
A low background Micromegas detector has been operating in the CAST experiment at CERN for the search of solar axions during the first phase of the experiment (2002-2004). The detector, made out of low radioactivity materials, operated efficiently and achieved a very low level of background rejection (5 x 10^-5 counts/keV/cm^2/s) without shielding.
△ Less
Submitted 22 February, 2007;
originally announced February 2007.
-
Neutron imaging with a Micromegas detector
Authors:
F. Jeanneau,
R. Junca,
J. Pancin,
M. Voytchev,
S. Andriamonje,
V. Dangendorf,
I. Espagnon,
H. Friedrich,
A. Giganon,
I. Giomataris,
A. Menelle,
A. Pluquet,
L. R. Rodriguez
Abstract:
The micropattern gaseous detector Micromegas has been developed for several years in Saclay and presents good performance for neutron detection. A prototype for neutron imaging has been designed and new results obtained in thermal neutron beams are presented. Based on previous results demonstrating a good 1D spatial resolution, a tomographic image of a multiwire cable has been performed using a…
▽ More
The micropattern gaseous detector Micromegas has been developed for several years in Saclay and presents good performance for neutron detection. A prototype for neutron imaging has been designed and new results obtained in thermal neutron beams are presented. Based on previous results demonstrating a good 1D spatial resolution, a tomographic image of a multiwire cable has been performed using a 1D Micromegas prototype. The number of pillars supporting the micromesh is too large and leads to local losses of efficiency that distort the tomographic reconstruction. Nevertheless, this first tomographic image achieved with this kind of detector is very encouraging. The next worthwhile development for neutron imaging is to achieve a bi-dimensional detector, which is presented in the second part of this study. The purpose of measurements was to investigate various operational parameters to optimize the spatial resolution. Through these measurements the optimum spatial resolution has been found to be around 160 microns (standard deviation) using Micromegas operating in double amplification mode. Several 2D imaging tests have been carried out. Some of these results have revealed fabrication defects that occurred during the manufacture of Micromegas and that are limiting the full potential of the present neutron imaging system.
△ Less
Submitted 21 July, 2006;
originally announced July 2006.
-
New neutron detector based on Micromegas technology for ADS projects
Authors:
Samuel Andriamonje,
Gregory Andriamonje,
Stephan Aune,
Gilles Ban,
Stephane Breaud,
Christophe Blandin,
Esther Ferrer,
Benoit Geslot,
Arnaud Giganon,
Ioannis Giomataris,
Christian Jammes,
Yacine Kadi,
Philippe Laborie,
Jean Francois Lecolley,
Julien Pancin,
Marc Riallot,
Roberto Rosa,
Lucia Sarchiapone,
Jean Claude Steckmeyer,
Joel Tillier
Abstract:
A new neutron detector based on Micromegas technology has been developed for the measurement of the simulated neutron spectrum in the ADS project. After the presentation of simulated neutron spectra obtained in the interaction of 140 MeV protons with the spallation target inside the TRIGA core, a full description of the new detector configuration is given. The advantage of this detector compared…
▽ More
A new neutron detector based on Micromegas technology has been developed for the measurement of the simulated neutron spectrum in the ADS project. After the presentation of simulated neutron spectra obtained in the interaction of 140 MeV protons with the spallation target inside the TRIGA core, a full description of the new detector configuration is given. The advantage of this detector compared to conventional neutron flux detectors and the results obtained with the first prototype at the CELINA 14 MeV neutron source facility at CEA-Cadarache are presented. The future developments of operational Piccolo-Micromegas for fast neutron reactors are also described.
△ Less
Submitted 7 July, 2006;
originally announced July 2006.
-
A low background Micromegas detector for the CAST experiment
Authors:
P. Abbon,
S. Andriamonje,
S. Aune,
D. Besin,
S. Cazaux,
P. Contrepois,
T. Dafni,
T. Decker,
N. Duportail,
G. Fanourakis,
E. Ferrer Ribas,
T. Geralis,
A. Giganon,
I. Giomataris,
M. Gros,
R. Hill,
I. G. Irastorza,
K. Kousouris,
J. Morales,
M. Pivovaroff,
M. Riallot,
R. Soufli,
K. Zachariadou,
G. Zaffanela
Abstract:
A low background Micromegas detector has been operating on the CAST experiment at CERN for the search of solar axions during the first phase of the experiment (2002-2004). The detector operated efficiently and achieved a very low level of background rejection ($5\times 10^{-5}$ counts keV$^{-1}$cm$^{-2}$s$^{-1}$) thanks to its good spatial and energy resolution as well as the low radioactivity m…
▽ More
A low background Micromegas detector has been operating on the CAST experiment at CERN for the search of solar axions during the first phase of the experiment (2002-2004). The detector operated efficiently and achieved a very low level of background rejection ($5\times 10^{-5}$ counts keV$^{-1}$cm$^{-2}$s$^{-1}$) thanks to its good spatial and energy resolution as well as the low radioactivity materials used in the construction of the detector. For the second phase of the experiment (2005-2007), the detector will be upgraded by adding a shielding and including focusing optics. These improvements should allow for a background rejection better than two orders of magnitude.
△ Less
Submitted 28 October, 2005;
originally announced October 2005.
-
Micromegas in a Bulk
Authors:
I. Giomataris,
R. De Oliveira,
S. Andriamonje,
S. Aune,
G. Charpak,
P. Colas,
A. Giganon,
Ph. Rebourgeard,
P. Salin
Abstract:
In this paper we present a novel way to manufacture the bulk Micromegas detector. A simple process based on the PCB (Printed Circuit Board) technology is employed to produce the entire sensitive detector. Such fabrication process could be extended to very large area detectors made by the industry. The low cost fabrication together with the robustness of the electrode materials will make it extre…
▽ More
In this paper we present a novel way to manufacture the bulk Micromegas detector. A simple process based on the PCB (Printed Circuit Board) technology is employed to produce the entire sensitive detector. Such fabrication process could be extended to very large area detectors made by the industry. The low cost fabrication together with the robustness of the electrode materials will make it extremely attractive for several applications ranging from particle physics and astrophysics to medicine
△ Less
Submitted 2 January, 2005;
originally announced January 2005.