-
Scalable heterostructures produced through mechanical abrasion of van der Waals powders
Authors:
Darren Nutting,
Jorlandio F. Felix,
Shin Dong-Wook,
Adolfo de Sanctis,
Monica F Craciun,
Saverio Russo,
Hong Chang,
Nick Cole,
Adam Woodgate,
Ioannis Leontis,
Henry A Fernández,
Freddie Withers
Abstract:
To fully exploit van der Waals materials and heterostructures, new mass-scalable production routes that are low cost but preserve the high electronic and optical quality of the single crystals are required. Here, we demonstrate an approach to realize a variety of functional heterostructures based on van der Waals nanocrystal films produced through the mechanical abrasion of bulk powders. Significa…
▽ More
To fully exploit van der Waals materials and heterostructures, new mass-scalable production routes that are low cost but preserve the high electronic and optical quality of the single crystals are required. Here, we demonstrate an approach to realize a variety of functional heterostructures based on van der Waals nanocrystal films produced through the mechanical abrasion of bulk powders. Significant performance improvements are realized in our devices compared to those fabricated through ink-jet printing of nanocrystal dispersions. To highlight the simplicity and scalability of the technology a multitude of different functional heterostructure devices such as resistors, capacitors, photovoltaics as well as energy devices such as large-area catalyst coatings for hydrogen evolution reaction and multilayer heterostructures for triboelectric nanogenerators are shown. The simplicity of the device fabrication, scalability, and compatibility with flexible substrates makes this a promising technological route for up-scalable van der Waals heterostructures.
△ Less
Submitted 28 November, 2019;
originally announced November 2019.
-
Laser writable high-K dielectric for van der Waals nano-electronics
Authors:
N. Peimyoo,
M. D. Barnes,
J. D. Mehew,
A. De Sanctis,
I. Amit,
J. Escolar,
K. Anastasiou,
A. P. Rooney,
S. J. Haigh,
S. Russo,
M. F. Craciun,
F. Withers
Abstract:
Like silicon-based semiconductor devices, van der Waals heterostructures will require integration with high-K oxides. This is needed to achieve suitable voltage scaling, improved performance as well as allowing for added functionalities. Unfortunately, commonly used high-k oxide deposition methods are not directly compatible with 2D materials. Here we demonstrate a method to embed a multi-function…
▽ More
Like silicon-based semiconductor devices, van der Waals heterostructures will require integration with high-K oxides. This is needed to achieve suitable voltage scaling, improved performance as well as allowing for added functionalities. Unfortunately, commonly used high-k oxide deposition methods are not directly compatible with 2D materials. Here we demonstrate a method to embed a multi-functional few nm thick high-k oxide within van der Waals devices without degrading the properties of the neighbouring 2D materials. This is achieved by in-situ laser oxidation of embedded few layer HfS2 crystals. The resultant oxide is found to be in the amorphous phase with a dielectric constant of k~15 and break-down electric fields in the range of 0.5-0.6 V/nm. This transformation allows for the creation of a variety of fundamental nano-electronic and opto-electronic devices including, flexible Schottky barrier field effect transistors, dual gated graphene transistors as well as vertical light emitting and detecting tunnelling transistors. Furthermore, upon dielectric break-down, electrically conductive filaments are formed. This filamentation process can be used to electrically contact encapsulated conductive materials. Careful control of the filamentation process also allows for reversible switching between two resistance states. This allows for the creation of resistive switching random access memories (ReRAMs). We believe that this method of embedding a high-k oxide within complex van der Waals heterostructures could play an important role in future flexible multi-functional van der Waals devices.
△ Less
Submitted 12 November, 2018;
originally announced November 2018.
-
Strain-engineering of twist-angle in graphene/hBN superlattice devices
Authors:
Adolfo De Sanctis,
Jake D. Mehew,
Saad Alkhalifa,
Freddie Withers,
Monica F. Craciun,
Saverio Russo
Abstract:
The observation of novel physical phenomena such as Hofstadter's butterfly, topological currents and unconventional superconductivity in graphene have been enabled by the replacement of SiO$_2$ with hexagonal Boron Nitride (hBN) as a substrate and by the ability to form superlattices in graphene/hBN heterostructures. These devices are commonly made by etching the graphene into a Hall-bar shape wit…
▽ More
The observation of novel physical phenomena such as Hofstadter's butterfly, topological currents and unconventional superconductivity in graphene have been enabled by the replacement of SiO$_2$ with hexagonal Boron Nitride (hBN) as a substrate and by the ability to form superlattices in graphene/hBN heterostructures. These devices are commonly made by etching the graphene into a Hall-bar shape with metal contacts. The deposition of metal electrodes, the design and specific configuration of contacts can have profound effects on the electronic properties of the devices possibly even affecting the alignment of graphene/hBN superlattices. In this work we probe the strain configuration of graphene on hBN contacted with two types of metal contacts, two-dimensional (2D) top-contacts and one-dimensional (1D) edge-contacts. We show that top-contacts induce strain in the graphene layer along two opposing leads, leading to a complex strain pattern across the device channel. Edge-contacts, on the contrary, do not show such strain pattern. A finite-elements modelling simulation is used to confirm that the observed strain pattern is generated by the mechanical action of the metal contacts clamped to the graphene. Thermal annealing is shown to reduce the overall doping whilst increasing the overall strain, indicating and increased interaction between graphene and hBN. Surprisingly, we find that the two contacts configurations lead to different twist-angles in graphene/hBN superlattices, which converge to the same value after thermal annealing. This observation confirms the self-locking mechanism of graphene/hBN superlattices also in the presence of strain gradients. Our experiments may have profound implications in the development of future electronic devices based on heterostructures and provide a new mechanism to induce complex strain patterns in 2D materials.
△ Less
Submitted 4 December, 2018; v1 submitted 9 October, 2018;
originally announced October 2018.
-
Graphene-based light sensing: fabrication, characterisation, physical properties and performance
Authors:
Adolfo De Sanctis,
Jake D. Mehew,
Monica F. Craciun,
Saverio Russo
Abstract:
Graphene and graphene-based materials exhibit exceptional optical and electrical properties with great promise for novel applications in light detection. However, several challenges prevent the full exploitation of these properties in commercial devices. Such challenges include the limited linear dynamic range (LDR) of graphene-based photodetectors, the lack of efficient generation and extraction…
▽ More
Graphene and graphene-based materials exhibit exceptional optical and electrical properties with great promise for novel applications in light detection. However, several challenges prevent the full exploitation of these properties in commercial devices. Such challenges include the limited linear dynamic range (LDR) of graphene-based photodetectors, the lack of efficient generation and extraction of photoexcited charges, the smearing of photoactive junctions due to hot-carriers effects, large-scale fabrication and ultimately the environmental stability of the constituent materials. In order to overcome the aforementioned limits, different approaches to tune the properties of graphene have been explored. A new class of graphene-based devices has emerged where chemical functionalisation, hybridisation with light-sensitising materials and the formation of heterostructures with other 2D materials have led to improved performance, stability or versatility. For example, intercalation of graphene with FeCl$_3$ is highly stable in ambient conditions and can be used to define photo-active junctions characterized by an unprecedented LDR while graphene oxide (GO) is a very scalable and versatile material which supports the photodetection from UV to THz frequencies. Nanoparticles and quantum dots have been used to enhance the absorption of pristine graphene and to enable high gain thanks to the photogating effect. In the same way, hybrid detectors made from stacked sequences of graphene and layered transition-metal dichalcogenides enabled a class of detectors with high gain and responsivity. In this work we will review the performance and advances in functionalised graphene and hybrid photodetectors, with particular focus on the physical mechanisms governing the photoresponse in these materials, their performance and possible future paths of investigation.
△ Less
Submitted 13 September, 2018;
originally announced September 2018.
-
Novel circuit design for high-impedance and non-local electrical measurements of two-dimensional materials
Authors:
Adolfo De Sanctis,
Jake D. Mehew,
Saad Alkhalifa,
Callum P. Tate,
Ashley White,
Adam R. Woodgate,
Monica F. Craciun,
Saverio Russo
Abstract:
Two-dimensional materials offer a novel platform for the development of future quantum technologies. However, the electrical characterisation of topological insulating states, non-local resistance and bandgap tuning in atomically-thin materials, can be strongly affected by spurious signals arising from the measuring electronics. Common-mode voltages, dielectric leakage in the coaxial cables and th…
▽ More
Two-dimensional materials offer a novel platform for the development of future quantum technologies. However, the electrical characterisation of topological insulating states, non-local resistance and bandgap tuning in atomically-thin materials, can be strongly affected by spurious signals arising from the measuring electronics. Common-mode voltages, dielectric leakage in the coaxial cables and the limited input impedance of alternate-current amplifiers can mask the true nature of such high-impedance states. Here, we present an optical isolator circuit which grants access to such states by electrically decoupling the current-injection from the voltage-sensing circuitry. We benchmark our apparatus against two state-of-the-art measurements: the non-local resistance of a graphene Hall bar and the transfer characteristic of a WS2 field-effect transistor. Our system allows the quick characterisation of novel insulating states in two-dimensional materials with potential applications in future quantum technologies.
△ Less
Submitted 30 January, 2018;
originally announced January 2018.
-
Strain-engineered inverse charge-funnelling in layered semiconductors
Authors:
Adolfo De Sanctis,
Iddo Amit,
Steven P. Hepplestone,
Monica F. Craciun,
Saverio Russo
Abstract:
The control of charges in a circuit due to an external electric field is ubiquitous to the exchange, storage and manipulation of information in a wide range of applications, from electronic circuits to synapses in neural cells. Conversely, the ability to grow clean interfaces between materials has been a stepping stone for engineering built-in electric fields largely exploited in modern photovolta…
▽ More
The control of charges in a circuit due to an external electric field is ubiquitous to the exchange, storage and manipulation of information in a wide range of applications, from electronic circuits to synapses in neural cells. Conversely, the ability to grow clean interfaces between materials has been a stepping stone for engineering built-in electric fields largely exploited in modern photovoltaics and opto-electronics. The emergence of atomically thin semiconductors is now enabling new ways to attain electric fields and unveil novel charge transport mechanisms. Here, we report the first direct electrical observation of the inverse charge-funnel effect enabled by deterministic and spatially resolved strain-induced electric fields in a thin sheet of HfS2. We demonstrate that charges driven by these spatially varying electric fields in the channel of a phototransistor lead to a 350% enhancement in the responsivity. These findings could enable the informed design of highly efficient photovoltaic cells.
△ Less
Submitted 29 January, 2018;
originally announced January 2018.
-
Highly efficient rubrene-graphene charge transfer interfaces as phototransistors in the visible regime
Authors:
Gareth F. Jones,
Rui M. Pinto,
Adolfo De Sanctis,
V. Karthik Nagareddy,
C. David Wright,
Helena Alves,
Monica F. Craciun,
Saverio Russo
Abstract:
Atomically thin materials such as graphene are uniquely responsive to charge transfer from adjacent materials, making them ideal charge transport layers in phototransistor devices. Effective implementation of organic semiconductors as a photoactive layer would open up a multitude of applications in biomimetic circuitry and ultra-broadband imaging but polycrystalline and amorphous thin films have s…
▽ More
Atomically thin materials such as graphene are uniquely responsive to charge transfer from adjacent materials, making them ideal charge transport layers in phototransistor devices. Effective implementation of organic semiconductors as a photoactive layer would open up a multitude of applications in biomimetic circuitry and ultra-broadband imaging but polycrystalline and amorphous thin films have shown inferior performance compared to inorganic semiconductors. Here, we utilize the long-range order in rubrene single crystals to engineer organic semiconductor-graphene phototransistors surpassing previously reported photo-gating efficiencies by one order of magnitude. Phototransistors based upon these interfaces are spectrally selective to visible wavelengths and, through photoconductive gain mechanisms, achieve responsivity as large as 10^7 A/W and a detectivity of 1.5 10^9 Jones at room temperature. These findings point towards implementing low-cost, flexible materials for amplified imaging at ultra-low light levels.
△ Less
Submitted 3 October, 2017; v1 submitted 2 October, 2017;
originally announced October 2017.
-
Extraordinary linear dynamic range in laser-defined functionalized graphene photodetectors
Authors:
Adolfo De Sanctis,
Gareth F. Jones,
Dominique J. Wehenkel,
Francisco Bezares,
Frank H. L. Koppens,
Monica F. Craciun,
Saverio Russo
Abstract:
Graphene-based photodetectors have demonstrated mechanical flexibility, large operating bandwidth, and broadband spectral response. However, their linear dynamic range (LDR) is limited by graphene's intrinsichot-carrier dynamics, which causes deviation from a linear photoresponse at low incident powers. At the same time, multiplication of hot carriers causes the photoactive region to be smeared ov…
▽ More
Graphene-based photodetectors have demonstrated mechanical flexibility, large operating bandwidth, and broadband spectral response. However, their linear dynamic range (LDR) is limited by graphene's intrinsichot-carrier dynamics, which causes deviation from a linear photoresponse at low incident powers. At the same time, multiplication of hot carriers causes the photoactive region to be smeared over distances of a few micro-meters, limiting the use of graphene in high-resolution applications. We present a novel method for engineer-ing photoactive junctions in FeCl3-intercalated graphene using laser irradiation. Photocurrent measured at these planar junctions shows an extraordinary linear response with an LDR value at least 4500 times larger than that of other graphene devices (44 dB) while maintaining high stability against environmental contamination without the need for encapsulation. The observed photoresponse is purely photovoltaic, demonstrating complete quenching of hot-carrier effects. These results pave the way toward the design of ultrathin photode-tectors with unprecedented LDR for high-definition imaging and sensing.
△ Less
Submitted 31 May, 2017;
originally announced June 2017.
-
An integrated and multi-purpose microscope for the characterization of atomically thin optoelectronic devices
Authors:
Adolfo De Sanctis,
Gareth F. Jones,
Nicola J. Townsend,
Monica F. Craciun,
Saverio Russo
Abstract:
Optoelectronic devices based on graphene and other two-dimensional (2D) materials, such as transition metal dichalcogenides (TMDs) are the focus of wide research interest. The characterization these emerging atomically thin materials and devices strongly relies on a set of measurements involving both optical and electronic instrumentation ranging from scanning photocurrent mapping to Raman and pho…
▽ More
Optoelectronic devices based on graphene and other two-dimensional (2D) materials, such as transition metal dichalcogenides (TMDs) are the focus of wide research interest. The characterization these emerging atomically thin materials and devices strongly relies on a set of measurements involving both optical and electronic instrumentation ranging from scanning photocurrent mapping to Raman and photoluminescence (PL) spectroscopy. Furthermore, proof-of-concept devices are usually fabricated from micro-meter size flakes, requiring microscopy techniques to characterize them. Current state-of-the-art commercial instruments offer the ability to characterize individual properties of these materials with no option for the in situ characterization of a wide enough range of complementary optical and electrical properties. Presently, the requirement to switch atomically-thin materials from one system to another often radically affects the properties of these uniquely sensitive materials through atmospheric contamination. Here, we present an integrated, multi-purpose instrument dedicated to the optical and electrical characterization of devices based on 2D materials which is able to perform low frequency electrical measurements, scanning photocurrent mapping, Raman, absorption and PL spectroscopy in one single set-up. We characterize this apparatus by performing multiple measurements on graphene, transition metal dichalcogenides (TMDs) and Si. The performance and resolution of each individual measurement technique is found to be equivalent to that of commercially available instruments. Contrary to nowadays commercial systems, a significant advantage of the developed instrument is that for the first time the integration of a wide range of complementary opto-electronic and spectroscopy characterization techniques is demonstrated in a single compact unit.
△ Less
Submitted 26 April, 2017; v1 submitted 21 September, 2016;
originally announced September 2016.
