Showing 1–50 of 56 results for author: Haigh, S J

In-Situ Single Particle Reconstruction Reveals 3D Evolution of PtNi Nanocatalysts During Heating

Authors: Yi-Chi Wang, Thomas J A Slater, Gerard M. Leteba, Candace I Lang, Zhong Lin Wang, Sarah J Haigh

Abstract: Tailoring nanoparticles composition and morphology is of particular interest for improving their performance for catalysis. A challenge of this approach is that the nanoparticles optimized initial structure often changes during use. Visualizing the three dimensional (3D) structural transformation in situ is therefore critical, but often prohibitively difficult experimentally. Although electron tom… ▽ More Tailoring nanoparticles composition and morphology is of particular interest for improving their performance for catalysis. A challenge of this approach is that the nanoparticles optimized initial structure often changes during use. Visualizing the three dimensional (3D) structural transformation in situ is therefore critical, but often prohibitively difficult experimentally. Although electron tomography provides opportunities for 3D imaging, restrictions in the tilt range of in situ holders together with electron dose considerations limit the possibilities for in situ electron tomography studies. Here, we present an in situ 3D imaging methodology using single particle reconstruction (SPR) that allows 3D reconstruction of nanoparticles with controlled electron dose and without tilting the microscope stage. This in situ SPR methodology was employed to investigate the restructuring and elemental redistribution within a population of PtNi nanoparticles at elevated temperatures. We further examined the atomic structure of PtNi and found a heat induced transition from a disordered to an ordered phase. Changes in structure and elemental distribution were linked to a loss of catalytic activity in the oxygen reduction reaction. The in situ SPR methodology employed here could be extended to a wide range of in situ studies employing not only heating, but gaseous, aqueous or electrochemical environments to reveal in operando nanoparticle evolution in 3D. △ Less

Submitted 16 October, 2023; originally announced October 2023.

Ultra-clean assembly of van der Waals heterostructures

Authors: Wendong Wang, Nicholas Clark, Matthew Hamer, Amy Carl, Endre Tovari, Sam Sullivan-Allsop, Evan Tillotson, Yunze Gao, Hugo de Latour, Francisco Selles, James Howarth, Eli G. Castanon, Mingwei Zhou, Haoyu Bai, Xiao Li, Astrid Weston, Kenji Watanabe, Takashi Taniguchi, Cecilia Mattevi, Thomas H. Bointon, Paul V. Wiper, Andrew J. Strudwick, Leonid A. Ponomarenko, Andrey Kretinin, Sarah J. Haigh , et al. (2 additional authors not shown)

Abstract: Layer-by-layer assembly of van der Waals (vdW) heterostructures underpins new discoveries in solid state physics, material science and chemistry. Despite the successes, all current 2D material (2DM) transfer techniques rely on the use of polymers which limit the cleanliness, ultimate electronic performance, and potential for optoelectronic applications of the heterostructures. In this article, we… ▽ More Layer-by-layer assembly of van der Waals (vdW) heterostructures underpins new discoveries in solid state physics, material science and chemistry. Despite the successes, all current 2D material (2DM) transfer techniques rely on the use of polymers which limit the cleanliness, ultimate electronic performance, and potential for optoelectronic applications of the heterostructures. In this article, we present a novel polymer-free platform for rapid and facile heterostructure assembly which utilises re-usable flexible silicon nitride membranes. We demonstrate that this allows fast and reproducible production of 2D heterostructures using both exfoliated and CVD-grown materials with perfect interfaces free from interlayer contamination and correspondingly excellent electronic behaviour, limited only by the size and intrinsic quality of the crystals used. Furthermore, removing the need for polymeric carriers allows new possibilities for vdW heterostructure fabrication: assembly at high temperatures up to 600°C, and in different environments including ultra-high vacuum (UHV) and when the materials are fully submerged in liquids. We demonstrate UHV heterostructure assembly for the first time, and show the reliable creation of graphene moiré superlattices with more than an order of magnitude improvement in their structural homogeneity. We believe that broad adaptation of our novel inorganic 2D materials assembly strategy will allow realisation of the full potential of vdW heterostructures as a platform for new physics and advanced optoelectronic technologies. △ Less

Submitted 25 August, 2023; originally announced August 2023.

Comments: 23 pages, 4 figures

Journal ref: Nature Electronics, 2023

Highly ${ }^{28} \mathrm{Si}$ Enriched Silicon by Localised Focused Ion Beam Implantation

Authors: Ravi Acharya, Maddison Coke, Mason Adshead, Kexue Li, Barat Achinuq, Rongsheng Cai, A. Baset Gholizadeh, Janet Jacobs, Jessica L. Boland, Sarah J. Haigh, Katie L. Moore, David N. Jamieson, Richard J. Curry

Abstract: Solid-state spin qubits within silicon crystals at mK temperatures show great promise in the realisation of a fully scalable quantum computation platform. Qubit coherence times are limited in natural silicon owing to coupling to the isotope ${ }^{29} \mathrm{Si}$ which has a non-zero nuclear spin. This work presents a method for the depletion of ${ }^{29} \mathrm{Si}$ in localised volumes of natur… ▽ More Solid-state spin qubits within silicon crystals at mK temperatures show great promise in the realisation of a fully scalable quantum computation platform. Qubit coherence times are limited in natural silicon owing to coupling to the isotope ${ }^{29} \mathrm{Si}$ which has a non-zero nuclear spin. This work presents a method for the depletion of ${ }^{29} \mathrm{Si}$ in localised volumes of natural silicon wafers by irradiation using a 45 keV ${ }^{28} \mathrm{Si}$ focused ion beam with fluences above $1 \times 10^{19} \, \mathrm{ions} \, \mathrm{cm}^{-2}$. Nanoscale secondary ion mass spectrometry analysis of the irradiated volumes shows unprecedented quality enriched silicon that reaches a minimal residual ${ }^{29} \mathrm{Si}$ value of 2.3 $\pm$ 0.7 ppm and with residual C and O comparable to the background concentration in the unimplanted wafer. Transmission electron microscopy lattice images confirm the solid phase epitaxial re-crystallization of the as-implanted amorphous enriched volume extending over 200 nm in depth upon annealing. The ease of fabrication, requiring only commercially available natural silicon wafers and ion sources, opens the possibility for co-integration of qubits in localised highly enriched volumes with control circuitry in the surrounding natural silicon for large-scale devices. △ Less

Submitted 23 August, 2023; originally announced August 2023.

Comments: 8 pages, 4 figures, 2 tables

Telluride nanocrystals with adjustable amorphous shell thickness and core-shell structure modulation by aqueous cation-exchange

Authors: Xinyuan Li, Mengyao Su, Yi-Chi Wang, Meng Xu, Minman Tong, Sarah J. Haigh, Jiatao Zhang

Abstract: Engineering the structure of core-shell colloidal semiconductor nanoparticles (CSNPs) is attractive due to the potential to enhance photo-induced charge transfer (PICT) and induce favourable optical and electronic properties. Nonetheless, the sensitivity of telluride CSNPs to high temperatures makes it challenging to precisely modulate their surface crystallinity. Herein, we have developed an effi… ▽ More Engineering the structure of core-shell colloidal semiconductor nanoparticles (CSNPs) is attractive due to the potential to enhance photo-induced charge transfer (PICT) and induce favourable optical and electronic properties. Nonetheless, the sensitivity of telluride CSNPs to high temperatures makes it challenging to precisely modulate their surface crystallinity. Herein, we have developed an efficient strategy for synthesising telluride CSNPs with thin amorphous shells using aqueous cation exchange (ACE). By changing the synthesis temperature in the range 40 to 110C, the crystallinity of the CdTe nanoparticles was controllable from perfect crystals with no detectable amorphous shell (c-CdTe) to a core-shell structure with a crystalline CdTe NP core covered by an amorphous shell of tunable thickness up to 7-8nm (c@a-CdTe) . A second ACE step transformed the c@a-CdTe to crystalline CdTe@HgTe core-shell NPs. The c@a-CdTe nanoparticles synthesized at 60C and having a 4-5 nm thick amorphous shell, exhibited the highest surface-enhanced Raman scattering activity with a high enhancement factor around 8.82x10^5, attributed to the coupling between the amorphous shell and the crystalline core. △ Less

Submitted 9 December, 2022; originally announced December 2022.

Comments: 15 pages, 5 figures, plus supplementary information

Journal ref: Inorganic Chemistry 61 (2022) 3989

Tracking single atoms in a liquid environment

Authors: Nicholas Clark, Daniel J. Kelly, Mingwei Zhou, Yi-Chao Zou, Chang Woo Myung, David G. Hopkinson, Christoph Schran, Angelos Michaelides, Roman Gorbachev, Sarah J. Haigh

Abstract: The chemical behaviour of single metal atoms largely depends on the local coordination environment, including interactions with the substrate and with the surrounding gas or liquid. However, the key instrumentation for studying such systems at the atomic scale generally requires high vacuum conditions, limiting the degree to which the aforementioned environmental parameters can be investigated. He… ▽ More The chemical behaviour of single metal atoms largely depends on the local coordination environment, including interactions with the substrate and with the surrounding gas or liquid. However, the key instrumentation for studying such systems at the atomic scale generally requires high vacuum conditions, limiting the degree to which the aforementioned environmental parameters can be investigated. Here we develop a new platform for transmission electron microscopy investigation of single metal atoms in liquids and study the dynamic behaviour of individual platinum atoms on the surface of a single layer MoS2 crystal in water. To achieve the record single atom resolution, we introduce a double liquid cell based on a 2D material heterostructure, which allows us to submerge an atomically thin membrane with liquid on both sides while maintaining the total specimen thickness of only ~ 70 nm. By comparison with an identical specimen imaged under high vacuum conditions, we reveal drastic differences in the single atom resting sites and atomic hopping behaviour, demonstrating that in situ imaging conditions are essential to gain complete understanding of the chemical activity of individual atoms. These findings pave the way for in situ liquid imaging of chemical processes with single atom precision. △ Less

Submitted 10 May, 2022; v1 submitted 9 March, 2022; originally announced March 2022.

Comments: Fixed Captions for figures 1 and 2 (did not appear in previous submission)

Surfactant-Free Synthesis of Spiky Hollow Ag-Au Nanostars with Chemically Exposed Surfaces for Enhanced Catalysis and Single-Particle SERS

Authors: Ziwei Ye, Chunchun Li, Maurizio Celentano, Matthew Lindley, Tamsin O'Reilly, Adam J. Greer, Yiming Huang, Christopher Hardacre, Sarah J. Haigh, Yikai Xu, Steven E. J. Bell

Abstract: Spiky/hollow metal nanoparticles have applications across a broad range of fields. However, current bottom-up methods to produce spiky/hollow metal nanoparticles rely heavily on the use of strongly adsorbing surfactant molecules, which is undesirable since these passivate the product particle surfaces. Here we report a high-yield surfactant-free synthesis of spiky hollow Au-Ag nanostars (SHAANs).… ▽ More Spiky/hollow metal nanoparticles have applications across a broad range of fields. However, current bottom-up methods to produce spiky/hollow metal nanoparticles rely heavily on the use of strongly adsorbing surfactant molecules, which is undesirable since these passivate the product particle surfaces. Here we report a high-yield surfactant-free synthesis of spiky hollow Au-Ag nanostars (SHAANs). Each SHAAN is composed of more than 50 spikes attached to a hollow ca. 150 nm diameter cubic core, which makes SHAANs highly plasmonically and catalytically active. Moreover, the surfaces of SHAANs are chemically exposed which gives them significantly enhanced functionality compared to their surfactant-capped counterparts, as demonstrated in surface-enhanced Raman spectroscopy (SERS) and catalysis. The chemical accessibility of the pristine SHAANs also allows the use of hydroxyethyl cellulose as a weakly-bound stabilizing agent. This produces colloidal SHAANs which remain stable for more than 1 month while retaining the functionalities of the pristine particles and allow even single-particle SERS to be realized. △ Less

Submitted 2 December, 2021; originally announced December 2021.

Comments: 10 pages, 6 figures, supplementary information

Doped graphene/carbon black hybrid catalyst giving enhanced oxygen reduction reaction activity with high resistance to corrosion in proton exchange membrane fuel cells

Authors: Zhaoqi Ji, Jianuo Chen, María Pérez-Page, Zunmin Guo, Ziyu Zhao, Rongsheng Cai, Maxwell T. P. Rigby, Sarah J. Haigh, Stuart M. Homes

Abstract: Nitrogen doping of the carbon is an important method to improve the performance and durability of catalysts for proton exchange membrane fuel cells by platinum-nitrogen and carbon-nitrogen bonds. This study shows that p-phenyl groups and graphitic N acting bridges linking platinum and the graphene/carbon black (the ratio graphene/carbon black=2/3) hybrid support materials achieved the average size… ▽ More Nitrogen doping of the carbon is an important method to improve the performance and durability of catalysts for proton exchange membrane fuel cells by platinum-nitrogen and carbon-nitrogen bonds. This study shows that p-phenyl groups and graphitic N acting bridges linking platinum and the graphene/carbon black (the ratio graphene/carbon black=2/3) hybrid support materials achieved the average size of platinum nanoparticles with (4.88 +/- 1.79) nm. It improved the performance of the lower-temperature hydrogen fuel cell up to 0.934 W cm-2 at 0.60 V, which is 1.55 times greater than that of commercial Pt/C. Doping also enhanced the interaction between Pt and the support materials, and the resistance to corrosion, thus improving the durability of the low-temperature hydrogen fuel cell with a much lower decay of 10 mV at 0.80 A cm-2 after 30k cycles of an in-situ accelerated stress test of catalyst degradation than that of 92 mV in Pt/C, which achieves the target of Department of Energy (<30 mV). Meanwhile, Pt/NrEGO2-CB3 remains 78% of initial power density at 1.5 A cm-2 after 5k cycles of in-situ accelerated stress test of carbon corrosion, which is more stable than the power density of commercial Pt/C, keeping only 54% after accelerated stress test. △ Less

Submitted 29 November, 2021; originally announced November 2021.

Comments: 22 pages, 8 figures and supplementary information

Oleylamine aging of PtNi nanoparticles giving enhanced functionality for the oxygen reduction reaction

Authors: Gerard M Leteba, Yi-Chi Wang, Thomas J A Slater, Rongsheng Cai, Conor Byrne, Christopher P Race, David R G Mitchell, Pieter B J Levecque, Neil P Young, Alex Walton, Angus I Kirkland, Sarah J Haigh, Candace I Lang

Abstract: We report a rapid solution-phase strategy to synthesize alloyed PtNi nanoparticles which demonstrate outstanding functionality for the oxygen reduction reaction (ORR). This one-pot co-reduction colloidal synthesis results in a monodisperse population of single-crystal nanoparticles of rhombic dodecahedral morphology, with Pt enriched edges and compositions close to Pt1Ni2. We use nanoscale 3D comp… ▽ More We report a rapid solution-phase strategy to synthesize alloyed PtNi nanoparticles which demonstrate outstanding functionality for the oxygen reduction reaction (ORR). This one-pot co-reduction colloidal synthesis results in a monodisperse population of single-crystal nanoparticles of rhombic dodecahedral morphology, with Pt enriched edges and compositions close to Pt1Ni2. We use nanoscale 3D compositional analysis to reveal for the first time that oleylamine (OAm)-aging of the rhombic dodecahedral Pt1Ni2 particles results in Ni leaching from surface facets, producing aged particles with concave faceting, an exceptionally high surface area and a composition of Pt2Ni1. We show that the modified atomic nanostructures catalytically outperform the original PtNi rhombic dodecahedral particles by more than 2-fold and also yield improved cycling durability. Their functionality for the ORR far exceeds commercially available Pt/C nanoparticle electrocatalysts, both in terms of mass-specific activities (up to a 25-fold increase) and intrinsic area-specific activities (up to a 27-fold increase). △ Less

Submitted 26 November, 2021; originally announced November 2021.

Comments: 14 pages, 4 figures, supplementary information

Journal ref: NanoLetters 21 (2021) 3989

Interfacial ferroelectricity in marginally twisted 2D semiconductors

Authors: Astrid Weston, Eli G Castanon, Vladimir Enaldiev, Fabio Ferreira, Shubhadeep Bhattacharjee, Shuigang Xu, Hector Corte-Leon, Zefei Wu, Nickolas Clark, Alex Summerfield, Teruo Hashimoto, Yunze Gao, Wendong Wang, Matthew Hamer, Harriet Read, Laura Fumagalli, Andrey V Kretinin, Sarah J. Haigh, Olga Kazakova, A. K. Geim, Vladimir I. Fal'ko, Roman Gorbachev

Abstract: Twisted heterostructures of two-dimensional crystals offer almost unlimited scope for the design of novel metamaterials. Here we demonstrate a room-temperature ferroelectric semiconductor that is assembled using mono- or few- layer MoS2. These van der Waals heterostructures feature broken inversion symmetry, which, together with the asymmetry of atomic arrangement at the interface of two 2D crysta… ▽ More Twisted heterostructures of two-dimensional crystals offer almost unlimited scope for the design of novel metamaterials. Here we demonstrate a room-temperature ferroelectric semiconductor that is assembled using mono- or few- layer MoS2. These van der Waals heterostructures feature broken inversion symmetry, which, together with the asymmetry of atomic arrangement at the interface of two 2D crystals, enables ferroelectric domains with alternating out-of-plane polarisation arranged into a twist-controlled network. The latter can be moved by applying out-of-plane electrical fields, as visualized in situ using channelling contrast electron microscopy. The interfacial charge transfer for the observed ferroelectric domains is quantified using Kelvin probe force microscopy and agrees well with theoretical calculations. The movement of domain walls and their bending rigidity also agrees well with our modelling results. Furthermore, we demonstrate proof-of-principle field-effect transistors, where the channel resistance exhibits a pronounced hysteresis governed by pinning of ferroelectric domain walls. Our results show a potential venue towards room temperature electronic and optoelectronic semiconductor devices with built-in ferroelectric memory functions. △ Less

Submitted 14 August, 2021; originally announced August 2021.

Comments: 15 pages, 3 figures

Ion exchange in atomically thin clays and micas

Authors: Yi-Chao Zou, Lucas Mogg, Nick Clark, Cihan Bacaksiz, Slavisa Milanovic, Vishnu Sreepal, Guang-Ping Hao, Yi-Chi Wang, David G. Hopkinson, Roman Gorbachev, Samuel Shaw, Kostya S. Novoselov, Rahul Raveendran-Nair, Francois M. Peeters, Marcelo Lozada-Hidalgo, Sarah J. Haigh

Abstract: Clays and micas are receiving attention as materials that, in their atomically thin form, could allow for novel proton conductive, ion selective, osmotic power generation, or solvent filtration membranes. The interest arises from the possibility of controlling their properties by exchanging ions in the crystal lattice. However, the ion exchange process itself remains largely unexplored in atomical… ▽ More Clays and micas are receiving attention as materials that, in their atomically thin form, could allow for novel proton conductive, ion selective, osmotic power generation, or solvent filtration membranes. The interest arises from the possibility of controlling their properties by exchanging ions in the crystal lattice. However, the ion exchange process itself remains largely unexplored in atomically thin materials. Here we use atomic-resolution scanning transmission electron microscopy to study the dynamics of the process and reveal the binding sites of individual ions in atomically thin and artificially restacked clays and micas. Imaging ion exchange after different exposure time and for different crystal thicknesses, we find that the ion diffusion constant, D, for the interlayer space of atomically thin samples is up to 10^4 times larger than in bulk crystals and approaches its value in free water. Surprisingly, samples where no bulk exchange is expected display fast exchange if the mica layers are twisted and restacked; but in this case, the exchanged ions arrange in islands controlled by the moiré superlattice dimensions. We attribute the fast ion diffusion to enhanced interlayer expandability resulting from weaker interlayer binding forces in both atomically thin and restacked materials. Finally, we demonstrate images of individual surface cations for these materials, which had remained elusive in previous studies. This work provides atomic scale insights into ion diffusion in highly confined spaces and suggests strategies to design novel exfoliated clays membranes. △ Less

Submitted 14 July, 2021; originally announced July 2021.

Comments: 11 pages, 4 figures, plus 35 pages supplementary information

Iron-silica interaction during reduction of precipitated silica-promoted iron oxides using in situ XRD and TEM

Authors: M. J. Coombes, E. J. Olivier, E. Prestat, S. J. Haigh, E. du Plessis, J. H. Neethling

Abstract: The effect of silica-promotion on the reduction of iron oxides in hydrogen was investigated using in situ X-ray diffraction and aberration-corrected transmission electron microscopy to understand the mechanism of reduction and the identity of the iron(II) silicate phase that has historically been designated as the cause of the iron-silica interaction in such materials. In the absence of a silica p… ▽ More The effect of silica-promotion on the reduction of iron oxides in hydrogen was investigated using in situ X-ray diffraction and aberration-corrected transmission electron microscopy to understand the mechanism of reduction and the identity of the iron(II) silicate phase that has historically been designated as the cause of the iron-silica interaction in such materials. In the absence of a silica promoter the reduction of hematite to α-Fe proceeds via magnetite. Silica promoted amorphous iron oxide is reduced to α-Fe via stable magnetite and wüstite phases. During reduction of silica-promoted iron oxide, Fe0 diffuses out of the amorphous silica-promoted iron oxide matrix upon reduction from Fe2+ and coexists with an amorphous Fe-O-Si matrix. Certain portions of wüstite remain difficult to reduce to α-Fe owing to the formation of a protective silica-containing layer covering the remaining iron oxide regions. Given sufficient energy, this amorphous Fe-O-Si material forms ordered, crystalline fayalite. △ Less

Submitted 12 May, 2021; originally announced May 2021.

Comments: 8 figures

Journal ref: Applied Catalysis A: General 613 (2021) 118031

In-Orbit Aerodynamic Coefficient Measurements using SOAR (Satellite for Orbital Aerodynamics Research)

Authors: N. H. Crisp, P. C. E. Roberts, S. Livadiotti, A. Macario Rojas, V. T. A. Oiko, S. Edmondson, S. J. Haigh, B. E. A. Holmes, L. A. Sinpetru, K. L. Smith, J. Becedas, R. M. Dominguez, V. Sulliotti-Linner, S. Christensen, J. Nielsen, M. Bisgaard, Y-A. Chan, S. Fasoulas, G. H. Herdrich, F. Romano, C. Traub, D. Garcia-Alminana, S. Rodriguez-Donaire, M. Sureda, D. Kataria , et al. (4 additional authors not shown)

Abstract: The Satellite for Orbital Aerodynamics Research (SOAR) is a CubeSat mission, due to be launched in 2021, to investigate the interaction between different materials and the atmospheric flow regime in very low Earth orbits (VLEO). Improving knowledge of the gas-surface interactions at these altitudes and identification of novel materials that can minimise drag or improve aerodynamic control are impo… ▽ More The Satellite for Orbital Aerodynamics Research (SOAR) is a CubeSat mission, due to be launched in 2021, to investigate the interaction between different materials and the atmospheric flow regime in very low Earth orbits (VLEO). Improving knowledge of the gas-surface interactions at these altitudes and identification of novel materials that can minimise drag or improve aerodynamic control are important for the design of future spacecraft that can operate in lower altitude orbits. Such satellites may be smaller and cheaper to develop or can provide improved Earth observation data or communications link-budgets and latency. Using precise orbit and attitude determination information and the measured atmospheric flow characteristics the forces and torques experienced by the satellite in orbit can be studied and estimates of the aerodynamic coefficients calculated. This paper presents the scientific concept and design of the SOAR mission. The methodology for recovery of the aerodynamic coefficients from the measured orbit, attitude, and in-situ atmospheric data using a least-squares orbit determination and free-parameter fitting process is described and the experimental uncertainty of the resolved aerodynamic coefficients is estimated. The presented results indicate that the combination of the satellite design and experimental methodology are capable of clearly illustrating the variation of drag and lift coefficient for differing surface incidence angle. The lowest uncertainties for the drag coefficient measurement are found at approximately 300 km, whilst the measurement of lift coefficient improves for reducing orbital altitude to 200 km. △ Less

Submitted 17 December, 2020; v1 submitted 14 December, 2020; originally announced December 2020.

Comments: 19 pages, 11 figures. Accepted for publication in Acta Astronautica (2020-12-14)

Journal ref: Acta Astronautica, vol. 180 (2021)

A Review of Gas-Surface Interaction Models for Orbital Aerodynamics Applications

Authors: Sabrina Livadiotti, Nicholas H. Crisp, Peter C. E. Roberts, Stephen D. Worrall, Vitor T. A. Oiko, Steve Edmondson, Sarah J. Haigh, Claire Huyton, Katharine L. Smith, Luciana A. Sinpetru, Brandon E. A. Holmes, Jonathan Becedas, Rosa María Domínguez, Valentín Cañas, Simon Christensen, Anders Mølgaard, Jens Nielsen, Morten Bisgaard, Yung-An Chan, Georg H. Herdrich, Francesco Romano, Stefanos Fasoulas, Constantin Traub, Daniel Garcia-Almiñana, Silvia Rodriguez-Donaire , et al. (7 additional authors not shown)

Abstract: Renewed interest in Very Low Earth Orbits (VLEO) - i.e. altitudes below 450 km - has led to an increased demand for accurate environment characterisation and aerodynamic force prediction. While the former requires knowledge of the mechanisms that drive density variations in the thermosphere, the latter also depends on the interactions between the gas-particles in the residual atmosphere and the su… ▽ More Renewed interest in Very Low Earth Orbits (VLEO) - i.e. altitudes below 450 km - has led to an increased demand for accurate environment characterisation and aerodynamic force prediction. While the former requires knowledge of the mechanisms that drive density variations in the thermosphere, the latter also depends on the interactions between the gas-particles in the residual atmosphere and the surfaces exposed to the flow. The determination of the aerodynamic coefficients is hindered by the numerous uncertainties that characterise the physical processes occurring at the exposed surfaces. Several models have been produced over the last 60 years with the intent of combining accuracy with relatively simple implementations. In this paper the most popular models have been selected and reviewed using as discriminating factors relevance with regards to orbital aerodynamics applications and theoretical agreement with gas-beam experimental data. More sophisticated models were neglected, since their increased accuracy is generally accompanied by a substantial increase in computation times which is likely to be unsuitable for most space engineering applications. For the sake of clarity, a distinction was introduced between physical and scattering kernel theory based gas-surface interaction models. The physical model category comprises the Hard Cube model, the Soft Cube model and the Washboard model, while the scattering kernel family consists of the Maxwell model, the Nocilla-Hurlbut-Sherman model and the Cercignani-Lampis-Lord model. Limits and assets of each model have been discussed with regards to the context of this paper. Wherever possible, comments have been provided to help the reader to identify possible future challenges for gas-surface interaction science with regards to orbital aerodynamic applications. △ Less

Submitted 22 November, 2020; v1 submitted 1 October, 2020; originally announced October 2020.

Comments: Journal paper (accepted for publication in "Progress in Aerospace Sciences") Replacement: Corrected typos in Equations

Journal ref: Progress in Aerospace Sciences, vol. 119 (2020)

Capillary condensation under atomic-scale confinement

Authors: Qian Yang, P. Z. Sun, L. Fumagalli, Y. V. Stebunov, S. J. Haigh, Z. W. Zhou, I. V. Grigorieva, F. C. Wang, A. K. Geim

Abstract: Capillary condensation of water is ubiquitous in nature and technology. It routinely occurs in granular and porous media, can strongly alter such properties as adhesion, lubrication, friction and corrosion, and is important in many processes employed by microelectronics, pharmaceutical, food and other industries. The century-old Kelvin equation is commonly used to describe condensation phenomena a… ▽ More Capillary condensation of water is ubiquitous in nature and technology. It routinely occurs in granular and porous media, can strongly alter such properties as adhesion, lubrication, friction and corrosion, and is important in many processes employed by microelectronics, pharmaceutical, food and other industries. The century-old Kelvin equation is commonly used to describe condensation phenomena and shown to hold well for liquid menisci with diameters as small as several nm. For even smaller capillaries that are involved in condensation under ambient humidity and, hence, of particular practical interest, the Kelvin equation is expected to break down, because the required confinement becomes comparable to the size of water molecules. Here we take advantage of van der Waals assembly of two-dimensional crystals to create atomic-scale capillaries and study condensation inside. Our smallest capillaries are less than 4 angstroms in height and can accommodate just a monolayer of water. Surprisingly, even at this scale, the macroscopic Kelvin equation using the characteristics of bulk water is found to describe accurately the condensation transition in strongly hydrophilic (mica) capillaries and remains qualitatively valid for weakly hydrophilic (graphene) ones. We show that this agreement is somewhat fortuitous and can be attributed to elastic deformation of capillary walls, which suppresses giant oscillatory behavior expected due to commensurability between atomic-scale confinement and water molecules. Our work provides a much-needed basis for understanding of capillary effects at the smallest possible scale important in many realistic situations. △ Less

Submitted 23 September, 2020; originally announced September 2020.

Journal ref: Nature 588, 250 - 253 (2020)

Atomic Resolution Imaging of CrBr$_{3}$ using Adhesion-Enhanced Grids

Authors: Matthew J. Hamer, David G. Hopkinson, Nick Clark, Mingwei Zhou, Wendong Wang, Yichao Zou, Daniel J. Kelly, Thomas H. Bointon, Sarah J. Haigh, Roman V. Gorbachev

Abstract: Suspended specimens of 2D crystals and their heterostructures are required for a range of studies including transmission electron microscopy (TEM), optical transmission experiments and nanomechanical testing. However, investigating the properties of laterally small 2D crystal specimens, including twisted bilayers and air sensitive materials, has been held back by the difficulty of fabricating the… ▽ More Suspended specimens of 2D crystals and their heterostructures are required for a range of studies including transmission electron microscopy (TEM), optical transmission experiments and nanomechanical testing. However, investigating the properties of laterally small 2D crystal specimens, including twisted bilayers and air sensitive materials, has been held back by the difficulty of fabricating the necessary clean suspended samples. Here we present a scalable solution which allows clean free-standing specimens to be realized with 100% yield by dry-stamping atomically thin 2D stacks onto a specially developed adhesion-enhanced support grid. Using this new capability, we demonstrate atomic resolution imaging of defect structures in atomically thin CrBr3, a novel magnetic material which degrades in ambient conditions. △ Less

Submitted 11 August, 2020; originally announced August 2020.

Comments: 17 pages (+ references), 3 Figures, 1 Table

Holographic reconstruction of the interlayer distance of bilayer two-dimensional crystal samples from their convergent beam electron diffraction patterns

Authors: Tatiana Latychevskaia, Yichao Zou, Colin Robert Woods, Yi Bo Wang, Matthew Holwill, Eric Prestat, Sarah J. Haigh, Kostya S. Novoselov

Abstract: The convergent beam electron diffraction (CBED) patterns of twisted bilayer samples exhibit interference patterns in their CBED spots. Such interference patterns can be treated as off-axis holograms and the phase of the scattered waves, meaning the interlayer distance can be reconstructed. A detailed protocol of the reconstruction procedure is provided in this study. In addition, we derive an exac… ▽ More The convergent beam electron diffraction (CBED) patterns of twisted bilayer samples exhibit interference patterns in their CBED spots. Such interference patterns can be treated as off-axis holograms and the phase of the scattered waves, meaning the interlayer distance can be reconstructed. A detailed protocol of the reconstruction procedure is provided in this study. In addition, we derive an exact formula for reconstructing the interlayer distance from the recovered phase distribution, which takes into account the different chemical compositions of the individual monolayers. It is shown that one interference fringe in a CBED spot is sufficient to reconstruct the distance between the layers, which can be practical for imaging samples with a relatively small twist angle or when probing small sample regions. The quality of the reconstructed interlayer distance is studied as a function of the twist angle. At smaller twist angles, the reconstructed interlayer distance distribution is more precise and artefact free. At larger twist angles, artefacts due to the moiré structure appear in the reconstruction. A method for the reconstruction of the average interlayer distance is presented. As for resolution, the interlayer distance can be reconstructed by the holographic approach at an accuracy of 0.5 A, which is a few hundred times better than the intrinsic z-resolution of diffraction limited resolution, as expressed through the spread of the measured k-values. Moreover, we show that holographic CBED imaging can detect variations as small as 0.1 A in the interlayer distance, though the quantitative reconstruction of such variations suffers from large errors. △ Less

Submitted 9 August, 2020; originally announced August 2020.

The Benefits of Very Low Earth Orbit for Earth Observation Missions

Authors: N. H. Crisp, P. C. E. Roberts, S. Livadiotti, V. T. A. Oiko, S. Edmondson, S. J. Haigh, C. Huyton, L. Sinpetru, K. L. Smith, S. D. Worrall, J. Becedas, R. M. Domínguez, D. González, V. Hanessian, A. Mølgaard, J. Nielsen, M. Bisgaard, Y. -A. Chan, S. Fasoulas, G. H. Herdrich, F. Romano, C. Traub, D. García-Almiñana, S. Rodríguez-Donaire, M. Sureda , et al. (8 additional authors not shown)

Abstract: Very low Earth orbits (VLEO), typically classified as orbits below approximately 450 km in altitude, have the potential to provide significant benefits to spacecraft over those that operate in higher altitude orbits. This paper provides a comprehensive review and analysis of these benefits to spacecraft operations in VLEO, with parametric investigation of those which apply specifically to Earth ob… ▽ More Very low Earth orbits (VLEO), typically classified as orbits below approximately 450 km in altitude, have the potential to provide significant benefits to spacecraft over those that operate in higher altitude orbits. This paper provides a comprehensive review and analysis of these benefits to spacecraft operations in VLEO, with parametric investigation of those which apply specifically to Earth observation missions. The most significant benefit for optical imaging systems is that a reduction in orbital altitude improves spatial resolution for a similar payload specification. Alternatively mass and volume savings can be made whilst maintaining a given performance. Similarly, for radar and lidar systems, the signal-to-noise ratio can be improved. Additional benefits include improved geospatial position accuracy, improvements in communications link-budgets, and greater launch vehicle insertion capability. The collision risk with orbital debris and radiation environment can be shown to be improved in lower altitude orbits, whilst compliance with IADC guidelines for spacecraft post-mission lifetime and deorbit is also assisted. Finally, VLEO offers opportunities to exploit novel atmosphere-breathing electric propulsion systems and aerodynamic attitude and orbit control methods. However, key challenges associated with our understanding of the lower thermosphere, aerodynamic drag, the requirement to provide a meaningful orbital lifetime whilst minimising spacecraft mass and complexity, and atomic oxygen erosion still require further research. Given the scope for significant commercial, societal, and environmental impact which can be realised with higher performing Earth observation platforms, renewed research efforts to address the challenges associated with VLEO operations are required. △ Less

Submitted 16 July, 2020; v1 submitted 15 July, 2020; originally announced July 2020.

Comments: 23 pages, 19 figures. Accepted for publication in Progress in Aerospace Sciences (24-04-2020)

Journal ref: Progress in Aerospace Sciences 117 (2020)

Raman Fingerprints of Graphene Produced by Anodic Electrochemical Exfoliation

Authors: Vaiva Nagyte, Daniel J. Kelly, Alexandre Felten, Gennaro Picardi, YuYoung Shin, Adriana Alieva, Robyn E. Worsley, Khaled Parvez, Simone Dehm, Ralph Krupke, Sarah J. Haigh, Antonios Oikonomou, Andrew J. Pollard, Cinzia Casiraghi

Abstract: Electrochemical exfoliation is one of the most promising methods for scalable production of graphene. However, limited understanding of its Raman spectrum as well as lack of measurement standards for graphene strongly limit its industrial applications. In this work we show a systematic study of the Raman spectrum of electrochemically exfoliated graphene, produced using different electrolytes and d… ▽ More Electrochemical exfoliation is one of the most promising methods for scalable production of graphene. However, limited understanding of its Raman spectrum as well as lack of measurement standards for graphene strongly limit its industrial applications. In this work we show a systematic study of the Raman spectrum of electrochemically exfoliated graphene, produced using different electrolytes and different types of solvents in varying amounts. We demonstrate that no information on the thickness can be extracted from the shape of the 2D peak as this type of graphene is defective. Furthermore, the number of defects and the uniformity of the samples strongly depend on the experimental conditions, including post-processing. Under specific conditions, formation of short conductive trans-polyacetylene chains has been observed. Our Raman analysis provides guidance for the community on how to get information on defects coming from electrolyte, temperature and other experimental conditions, by making Raman spectroscopy a powerful metrology tool. △ Less

Submitted 15 April, 2020; originally announced June 2020.

Comments: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Nano Letters, American Chemical Society after peer review. To access the final edited and published work, included the SI, see DOI: 10.1021/acs.nanolett.0c00332

Large magnetoelectric coupling in multiferroic oxide heterostructures assembled via epitaxial lift-off

Authors: David Pesquera, Ekaterina Khestanova, Massimo Ghidini, Sen Zhang, Aidan P. Rooney, Francesco Maccherozzi, Patricia Riego, Saeedeh Farokhipoor, Jiyeob Kim, Xavier Moya, Mary E. Vickers, Nadia A. Stelmashenko, Sarah J. Haigh, Sarnjeet S. Dhesi, Neil D. Mathur

Abstract: The strain dependent functional properties of epitaxial transition metal oxide films can be significantly modified via substrate selection. However, large lattice mismatches preclude dislocation-free epitaxial growth on ferroelectric substrates, whose strain states are modified by applied electric fields. Here we overcome this mismatch problem by depositing an epitaxial film of ferromagnetic La0.7… ▽ More The strain dependent functional properties of epitaxial transition metal oxide films can be significantly modified via substrate selection. However, large lattice mismatches preclude dislocation-free epitaxial growth on ferroelectric substrates, whose strain states are modified by applied electric fields. Here we overcome this mismatch problem by depositing an epitaxial film of ferromagnetic La0.7Sr0.3MnO3 on a single crystal substrate of well lattice matched SrTiO3 via a film of SrRuO3 that we subsequently dissolved, permitting the transfer of unstrained La0.7Sr0.3MnO3 to a ferroelectric substrate of 0.68Pb(Mg1/3Nb2/3)O3 0.32PbTiO3 in a different crystallographic orientation. Ferroelectric domain switching, and a concomitant ferroelectric phase transition, produced large non volatile changes of magnetization that were mediated by magnetic domain rotations at locations defined by the microstructure - as revealed via high resolution vector maps of magnetization constructed from photoemission electron microscopy data, with contrast from x-ray magnetic circular dichroism. In future, our method may be exploited to control functional properties in dislocation free epitaxial films of any composition. △ Less

Submitted 2 June, 2020; v1 submitted 29 May, 2020; originally announced June 2020.

Journal ref: Nat Commun 11, 3190 (2020)

Graphene-TiS$_3$ heterojunction for selective polar vapor sensing at room temperature

Authors: Nassim Rafiefard, Azam Iraji zad, Ali Esfandiar, Pezhman Sasanpour, Somayeh Fardindoost, Yichao Zou, Sarah. J. Haigh, Seyed Hossein Hosseini

Abstract: In this work, the room temperature polar vapor sensing behavior of two dimentional (2D) heterojunction Graphene-TiS3 materials and TiS3 nanoribbons is investigated. TiS3 nanoribbons were synthesized via chemical vapor transport (CVT) and their structure was investigated by scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), energy dispersive X- ray spectro… ▽ More In this work, the room temperature polar vapor sensing behavior of two dimentional (2D) heterojunction Graphene-TiS3 materials and TiS3 nanoribbons is investigated. TiS3 nanoribbons were synthesized via chemical vapor transport (CVT) and their structure was investigated by scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), energy dispersive X- ray spectroscopy (EDS), X-ray diffraction (XRD), Raman spectroscopy and Fourier transform infrared spectroscopy (FT-IR) analysis. The gas sensing performance of the TiS3 nanoribbons was assessed through the observed changes in their electronic behavior. Sensing devices were fabricated with gold contacts and with lithographically patterned graphene (Gr) electrodes in a 2D heterojunction Gr-TiS3-Gr architecture.. It is observed that the gold contacted TiS3 device has a rather linear I-V behavior while the Gr-TiS3-Gr heterojunction forms a contact with a higher Schottky barrier (250 meV). I-V responses of the sensors were recorded at room temperature with a relative humidity of 55% and for different ethanol vapor concentrations (varying from 2 to 20 ppm). I-V plots indicated an increase in the resistance of Gr-TiS3-Gr by the adsorption of water and ethanol molecules with relatively high sensing response (~3353% at 2 ppm). Our results reveal that selective and stable responses to a low concentration of ethanol vapor (2 ppm) can be achieved at room temperature with transient response and recovery times of around 6 s and 40 s, respectively. Our proposed design demonstrate a new approach for selective molecular recognition using polar interactions between analyte vapors and heterojunctions of 2D-materials. △ Less

Submitted 28 May, 2020; originally announced May 2020.

Journal ref: Microchim Acta 187, 117 (2020)

Design-controlled Synthesis of IrO$_2$ sub-monolayers on Au Nanodendrites: Marrying Plasmonic and Electrocatalytic Properties

Authors: Isabel C. de Freitas, Luanna S. Parreira, Eduardo C. M. Barbosa, Barbara A. Novaes, Tong Mou, Tiago. V. Alves, Jhon Quiroz, Yi-Chi Wang, Thomas J Slater, Andrew Thomas, Bin Wang, Sarah J Haigh, Pedro H. C. Camargoa

Abstract: We develop herein plasmonic-catalytic Au-IrO$_2$ nanostructures with a morphology optimized for efficient light harvesting and catalytic surface area; the nanoparticles have a dendritic morphology, with closely spaced Au branches all partially covered by an ultrathin (1 nm) IrO$_2$ shell. This nanoparticle architecture optimizes optical features due to the interactions of closely spaced plasmonic… ▽ More We develop herein plasmonic-catalytic Au-IrO$_2$ nanostructures with a morphology optimized for efficient light harvesting and catalytic surface area; the nanoparticles have a dendritic morphology, with closely spaced Au branches all partially covered by an ultrathin (1 nm) IrO$_2$ shell. This nanoparticle architecture optimizes optical features due to the interactions of closely spaced plasmonic branches forming electromagnetic hot spots, and the ultra-thin IrO$_2$ layer maximizes efficient use of this expensive catalyst. This concept was evaluated towards the enhancement of the electrocatalytic performances towards the oxygen evolution reaction (OER) as a model transformation. The OER can play a central role in meeting future energy demands but the performance of conventional electrocatalysts in this reaction is limited by the sluggish OER kinetics. We demonstrate an improvement of the OER performance for one of the most active OER catalysts, IrO$_2$, by harvesting plasmonic effects from visible light illumination in multimetallic nanoparticles. We find that the OER activity for the Au-IrO$_2$ nanodendrites can be improved under LSPR excitation, matching best properties reported in the literature. Our simulations and electrocatalytic data demonstrate that the enhancement in OER activities can be attributed to an electronic interaction between Au and IrO$_2$ and to the activation of Ir-O bonds by LSPR excited hot holes, leading to a change in the reaction mechanism (rate-determinant step) under visible light illumination. △ Less

Submitted 20 April, 2020; originally announced April 2020.

Comments: 5 figures

Convergent beam electron diffraction of multilayer van der Waals structures

Authors: Tatiana Latychevskaia, Colin Robert Woods, Yi Bo Wang, Matthew Holwill, Eric Prestat, Sarah J. Haigh, Kostya S. Novoselov

Abstract: Convergent beam electron diffraction is routinely applied for studying deformation and local strain in thick crystals by matching the crystal structure to the observed intensity distributions. Recently, it has been demonstrated that CBED can be applied for imaging two-dimensional (2D) crystals where a direct reconstruction is possible and three-dimensional crystal deformations at a nanometre resol… ▽ More Convergent beam electron diffraction is routinely applied for studying deformation and local strain in thick crystals by matching the crystal structure to the observed intensity distributions. Recently, it has been demonstrated that CBED can be applied for imaging two-dimensional (2D) crystals where a direct reconstruction is possible and three-dimensional crystal deformations at a nanometre resolution can be retrieved. Here, we demonstrate that second-order effects allow for further information to be obtained regarding stacking arrangements between the crystals. Such effects are especially pronounced in samples consisting of multiple layers of 2D crystals. We show, using simulations and experiments, that twisted multilayer samples exhibit extra modulations of interference fringes in CBED patterns, i. e., a CBED moiré. A simple and robust method for the evaluation of the composition and the number of layers from a single-shot CBED pattern is demonstrated. △ Less

Submitted 28 March, 2020; originally announced March 2020.

Journal ref: Ultramicroscopy 212, 112976 (2020)

Enhanced superconductivity in few-layer TaS$_2$ due to healing by oxygenation

Authors: J. Bekaert, E. Khestanova, D. G. Hopkinson, J. Birkbeck, N. Clark, M. Zhu, D. A. Bandurin, R. Gorbachev, S. Fairclough, Y. Zou, M. Hamer, D. J. Terry, J. J. P. Peters, A. M. Sanchez, B. Partoens, S. J. Haigh, M. V. Milošević, I. V. Grigorieva

Abstract: When approaching the atomically thin limit, defects and disorder play an increasingly important role in the properties of two-dimensional materials. Superconductivity is generally thought to be vulnerable to these effects, but here we demonstrate the contrary in the case of oxygenation of ultrathin tantalum disulfide (TaS$_2$). Our first-principles calculations show that incorporation of oxygen in… ▽ More When approaching the atomically thin limit, defects and disorder play an increasingly important role in the properties of two-dimensional materials. Superconductivity is generally thought to be vulnerable to these effects, but here we demonstrate the contrary in the case of oxygenation of ultrathin tantalum disulfide (TaS$_2$). Our first-principles calculations show that incorporation of oxygen into the TaS$_2$ crystal lattice is energetically favourable and effectively heals sulfur vacancies typically present in these crystals, thus restoring the carrier density to the intrinsic value of TaS$_2$. Strikingly, this leads to a strong enhancement of the electron-phonon coupling, by up to 80% in the highly-oxygenated limit. Using transport measurements on fresh and aged (oxygenated) few-layer TaS$_2$, we found a marked increase of the superconducting critical temperature ($T_{\mathrm{c}}$) upon aging, in agreement with our theory, while concurrent electron microscopy and electron-energy loss spectroscopy confirmed the presence of sulfur vacancies in freshly prepared TaS$_2$ and incorporation of oxygen into the crystal lattice with time. Our work thus reveals the mechanism by which certain atomic-scale defects can be beneficial to superconductivity and opens a new route to engineer $T_{\mathrm{c}}$ in ultrathin materials. △ Less

Submitted 16 December, 2019; originally announced December 2019.

Atomic reconstruction in twisted bilayers of transition metal dichalcogenides

Authors: Astrid Weston, Yichao Zou, Vladimir Enaldiev, Alex Summerfield, Nicholas Clark, Viktor Z'olyomi, Abigail Graham, Celal Yelgel, Samuel Magorrian, Mingwei Zhou, Johanna Zultak, David Hopkinson, Alexei Barinov, Thomas Bointon, Andrey Kretinin, Neil R. Wilson, Peter H. Beton, Vladimir I. Fal'ko, Sarah J. Haigh, Roman Gorbachev

Abstract: Van der Waals heterostructures form a massive interdisciplinary research field, fueled by the rich material science opportunities presented by layer assembly of artificial solids with controlled composition, order and relative rotation of adjacent atomic planes. Here we use atomic resolution transmission electron microscopy and multiscale modeling to show that the lattice of MoS$_2$ and WS$_2$ bil… ▽ More Van der Waals heterostructures form a massive interdisciplinary research field, fueled by the rich material science opportunities presented by layer assembly of artificial solids with controlled composition, order and relative rotation of adjacent atomic planes. Here we use atomic resolution transmission electron microscopy and multiscale modeling to show that the lattice of MoS$_2$ and WS$_2$ bilayers twisted to a small angle, $θ<3^{\circ}$, reconstructs into energetically favorable stacking domains separated by a network of stacking faults. For crystal alignments close to 3R stacking, a tessellated pattern of mirror reflected triangular 3R domains emerges, separated by a network of partial dislocations which persist to the smallest twist angles. Scanning tunneling measurements show that the electronic properties of those 3R domains appear qualitatively different from 2H TMDs, featuring layer-polarized conduction band states caused by lack of both inversion and mirror symmetry. In contrast, for alignments close to 2H stacking, stable 2H domains dominate, with nuclei of an earlier unnoticed metastable phase limited to $\sim$ 5nm in size. This appears as a kagome-like pattern at $θ\sim 1^{\circ}$, transitioning at $θ\rightarrow 0$ to a hexagonal array of screw dislocations separating large-area 2H domains. △ Less

Submitted 7 July, 2020; v1 submitted 28 November, 2019; originally announced November 2019.

Electrically pumped WSe$_2$-based light-emitting van der Waals heterostructures embedded in monolithic dielectric microcavities

Authors: O. Del Pozo-Zamudio, A. Genco, S. Schwarz, F. Withers, P. M. Walker, T. Godde, R. C. Schofield, A. P. Rooney, E. Prestat, K. Watanabe, T. Taniguchi, C. Clark, S. J. Haigh, D. N. Krizhanovskii, K. S. Novoselov, A. I. Tartakovskii

Abstract: Vertical stacking of atomically thin layered materials opens new possibilities for the fabrication of heterostructures with favorable optoelectronic properties. The combination of graphene, hexagonal boron nitride and semiconducting transition metal dichalcogenides allows fabrication of electroluminescence (EL) devices, compatible with a wide range of substrates. Here, we demonstrate a full integr… ▽ More Vertical stacking of atomically thin layered materials opens new possibilities for the fabrication of heterostructures with favorable optoelectronic properties. The combination of graphene, hexagonal boron nitride and semiconducting transition metal dichalcogenides allows fabrication of electroluminescence (EL) devices, compatible with a wide range of substrates. Here, we demonstrate a full integration of an electroluminescent van der Waals heterostructure in a monolithic optical microcavity made of two high reflectivity dielectric distributed Bragg reflectors (DBRs). Owing to the presence of graphene and hexagonal boron nitride protecting the WSe$_2$ during the top mirror deposition, we fully preserve the optoelectronic behaviour of the device. Two bright cavity modes appear in the EL spectrum featuring Q-factors of 250 and 580 respectively: the first is attributed directly to the monolayer area, while the second is ascribed to the portion of emission guided outside the WSe$_2$ island. By embedding the EL device inside the microcavity structure, a significant modification of the directionality of the emitted light is achieved, with the peak intensity increasing by nearly two orders of magnitude at the angle of the maximum emission compared with the same EL device without the top DBR. Furthermore, the coupling of the WSe$_2$ EL to the cavity mode with a dispersion allows a tuning of the peak emission wavelength exceeding 35 nm (80 meV) by varying the angle at which the EL is observed from the microcavity. This work provides a route for the development of compact vertical-cavity surface-emitting devices based on van der Waals heterostructures. △ Less

Submitted 4 June, 2020; v1 submitted 15 November, 2019; originally announced November 2019.

Journal ref: O. Del Pozo-Zamudio et al. 2D materials 7 (2020) 3, 031006

Stacking Order in Graphite Films Controlled by Van der Waals Technology

Authors: Yaping Yang, Yi-Chao Zou, Colin R. Woods, Yanmeng Shi, Jun Yin, Shuigang Xu, Servet Ozdemir, Takashi Taniguchi, Kenji Watanabe, Andre K. Geim, Kostya S. Novoselov, Sarah J. Haigh, Artem Mishchenko

Abstract: In graphite crystals, layers of graphene reside in three equivalent, but distinct, stacking positions typically referred to as A, B, and C projections. The order in which the layers are stacked defines the electronic structure of the crystal, providing an exciting degree of freedom which can be exploited for designing graphitic materials with unusual properties including predicted high-temperature… ▽ More In graphite crystals, layers of graphene reside in three equivalent, but distinct, stacking positions typically referred to as A, B, and C projections. The order in which the layers are stacked defines the electronic structure of the crystal, providing an exciting degree of freedom which can be exploited for designing graphitic materials with unusual properties including predicted high-temperature superconductivity and ferromagnetism. However, the lack of control of the stacking sequence limits most research to the stable ABA form of graphite. Here we demonstrate a strategy to control the stacking order using van der Waals technology. To this end, we first visualise the distribution of stacking domains in graphite films and then perform directional encapsulation of ABC-rich graphite crystallites with hexagonal boron nitride (hBN). We found that hBN-encapsulation which is introduced parallel to the graphite zigzag edges preserves ABC stacking, while encapsulation along the armchair edges transforms the stacking to ABA. The technique presented here should facilitate new research on the important properties of ABC graphite. △ Less

Submitted 1 November, 2019; originally announced November 2019.

Ultra-thin van der Waals crystals as semiconductor quantum wells

Authors: Johanna Zultak, Samuel Magorrian, Maciej Koperski, Alistair Garner, Matthew J Hamer, Endre Tovari, Kostya S Novoselov, Alexander Zhukov, Yichao Zou, Neil R. Wilson, Sarah J Haigh, Andrey Kretinin, Vladimir I. Fal'ko, Roman Gorbachev

Abstract: Control over the electronic spectrum at low energy is at the heart of the functioning of modern advanced electronics: high electron mobility transistors, semiconductor and Capasso terahertz lasers, and many others. Most of those devices rely on the meticulous engineering of the size quantization of electrons in quantum wells. This avenue, however, hasn't been explored in the case of 2D materials.… ▽ More Control over the electronic spectrum at low energy is at the heart of the functioning of modern advanced electronics: high electron mobility transistors, semiconductor and Capasso terahertz lasers, and many others. Most of those devices rely on the meticulous engineering of the size quantization of electrons in quantum wells. This avenue, however, hasn't been explored in the case of 2D materials. Here we transfer this concept onto the van der Waals heterostructures which utilize few-layers films of InSe as quantum wells. The precise control over the energy of the subbands and their uniformity guarantees extremely high quality of the electronic transport in such systems. Using novel tunnelling and light emitting devices, for the first time we reveal the full subbands structure by studying resonance features in the tunnelling current, photoabsorption and light emission. In the future, these systems will allow development of elementary blocks for atomically thin infrared and THz light sources based on intersubband optical transitions in few-layer films of van der Waals materials. △ Less

Submitted 31 October, 2019; v1 submitted 9 October, 2019; originally announced October 2019.

Comments: 12 pages, 3 figures

Journal ref: Nat Commun 11, 125 (2020)

Two-dimensional covalent crystals by chemical conversion of thin van der Waals materials

Authors: Vishnu Sreepal, Mehmet Yagmurcukardes, Kalangi S. Vasu, Daniel J. Kelly, Sarah F. R. Taylor, Vasyl G. Kravets, Zakhar Kudrynskyi, Zakhar D. Kovalyuk, Amalia Patanè, Alexander N. Grigorenko, Sarah J. Haigh, Christopher Hardacre, Laurence Eaves, Hasan Sahin, Andre K. Geim, Francois M. Peeters, Rahul R. Nair

Abstract: Most of the studied two-dimensional (2D) materials have been obtained by exfoliation of van der Waals crystals. Recently, there has been growing interest in fabricating synthetic 2D crystals which have no layered bulk analogues. These efforts have been focused mainly on the surface growth of molecules in high vacuum. Here, we report an approach to making 2D crystals of covalent solids by chemical… ▽ More Most of the studied two-dimensional (2D) materials have been obtained by exfoliation of van der Waals crystals. Recently, there has been growing interest in fabricating synthetic 2D crystals which have no layered bulk analogues. These efforts have been focused mainly on the surface growth of molecules in high vacuum. Here, we report an approach to making 2D crystals of covalent solids by chemical conversion of van der Waals layers. As an example, we use 2D indium selenide (InSe) obtained by exfoliation and converted it by direct fluorination into indium fluoride (InF3), which has a non-layered, rhombohedral structure and therefore cannot be possibly obtained by exfoliation. The conversion of InSe into InF3 is found to be feasible for thicknesses down to three layers of InSe, and the obtained stable InF3 layers are doped with selenium. We study this new 2D material by optical, electron transport and Raman measurements and show that it is a semiconductor with a direct bandgap of 2.2 eV, exhibiting high optical transparency across the visible and infrared spectral ranges. We also demonstrate the scalability of our approach by chemical conversion of large-area, thin InSe laminates obtained by liquid exfoliation into InF3 films. The concept of chemical conversion of cleavable thin van der Waals crystals into covalently-bonded non-cleavable ones opens exciting prospects for synthesizing a wide variety of novel atomically thin covalent crystals. △ Less

Submitted 20 August, 2019; originally announced August 2019.

Journal ref: Nano Lett.2019, 19, 6475, 2019

Atomically-thin micas as proton conducting membranes

Authors: L. Mogg, G. -P. Hao, S. Zhang, C. Bacaksiz, Y. Zou, S. J. Haigh, F. M. Peeters, A. K. Geim, M. Lozada-Hidalgo

Abstract: Monolayers of graphene and hexagonal boron nitride (hBN) are highly permeable to thermal protons. For thicker two-dimensional (2D) materials, proton conductivity diminishes exponentially so that, for example, monolayer MoS2 that is just three atoms thick is completely impermeable to protons. This seemed to suggest that only one-atom-thick crystals could be used as proton conducting membranes. Here… ▽ More Monolayers of graphene and hexagonal boron nitride (hBN) are highly permeable to thermal protons. For thicker two-dimensional (2D) materials, proton conductivity diminishes exponentially so that, for example, monolayer MoS2 that is just three atoms thick is completely impermeable to protons. This seemed to suggest that only one-atom-thick crystals could be used as proton conducting membranes. Here we show that few-layer micas that are rather thick on the atomic scale become excellent proton conductors if native cations are ion-exchanged for protons. Their areal conductivity exceeds that of graphene and hBN by one-two orders of magnitude. Importantly, ion-exchanged 2D micas exhibit this high conductivity inside the infamous gap for proton-conducting materials, which extends from 100 C to 500 C. Areal conductivity of proton-exchanged monolayer micas can reach above 100 S cm-2 at 500 C, well above the current requirements for the industry roadmap. We attribute the fast proton permeation to 5 A-wide tubular channels that perforate micas' crystal structure which, after ion exchange, contain only hydroxyl groups inside. Our work indicates that there could be other 2D crystals with similar nm-scale channels, which could help close the materials gap in proton-conducting applications. △ Less

Submitted 11 June, 2019; originally announced June 2019.

Journal ref: Nature Nanotechnology (2019)

Self-limiting growth of two-dimensional palladium between graphene oxide layers

Authors: Yang Su, Eric Prestat, Chengyi Hu, Vinod Kumar Puthiyapura, Mehdi Neek-Amal, Hui Xiao, Kun Huang, Vasyl G. Kravets, Sarah J. Haigh, Christopher Hardacre, Francois M. Peeters, Rahul R. Nair

Abstract: The ability of different materials to display self-limiting growth has recently attracted enormous attention due to the importance of nanoscale materials in applications for catalysis, energy conversion, (opto)electronics, etc. Here, we show that electrochemical deposition of palladium (Pd) between graphene oxide (GO) sheets result in a self-limiting growth of 5 nm thin Pd nanosheets. The self-lim… ▽ More The ability of different materials to display self-limiting growth has recently attracted enormous attention due to the importance of nanoscale materials in applications for catalysis, energy conversion, (opto)electronics, etc. Here, we show that electrochemical deposition of palladium (Pd) between graphene oxide (GO) sheets result in a self-limiting growth of 5 nm thin Pd nanosheets. The self-limiting growth is found to be a consequence of strong interaction of Pd with the confining GO sheets which results in bulk growth of Pd being energetically unfavourable for larger thicknesses. Furthermore, we have successfully carried out liquid exfoliation of the resulting Pd-GO laminates to isolate Pd nanosheets and demonstrated their high efficiency in continuous flow catalysis and electrocatalysis. △ Less

Submitted 7 June, 2019; originally announced June 2019.

Journal ref: Nano Letters 19, 4678-4683, 2019

Micromagnetometry of two-dimensional ferromagnets

Authors: M. Kim, P. Kumaravadivel, J. Birkbeck, W. Kuang, S. G. Xu, D. G. Hopkinson, J. Knolle, P. A. McClarty, A. I. Berdyugin, M. Ben Shalom, R. V. Gorbachev, S. J. Haigh, S. Liu, J. H. Edgar, K. S. Novoselov, I. V. Grigorieva, A. K. Geim

Abstract: The study of atomically thin ferromagnetic crystals has led to the discovery of unusual magnetic behaviour and provided insight into the magnetic properties of bulk materials. However, the experimental techniques that have been used to explore ferromagnetism in such materials cannot probe the magnetic field directly. Here, we show that ballistic Hall micromagnetometry can be used to measure the ma… ▽ More The study of atomically thin ferromagnetic crystals has led to the discovery of unusual magnetic behaviour and provided insight into the magnetic properties of bulk materials. However, the experimental techniques that have been used to explore ferromagnetism in such materials cannot probe the magnetic field directly. Here, we show that ballistic Hall micromagnetometry can be used to measure the magnetization of individual two-dimensional ferromagnets. Our devices are made by van der Waals assembly in such a way that the investigated ferromagnetic crystal is placed on top of a multi-terminal Hall bar made from encapsulated graphene. We use the micromagnetometry technique to study atomically thin chromium tribromide (CrBr3). We find that the material remains ferromagnetic down to monolayer thickness and exhibits strong out-of-plane anisotropy. We also find that the magnetic response of CrBr3 varies little with the number of layers and its temperature dependence cannot be described by the simple Ising model of two-dimensional ferromagnetism. △ Less

Submitted 12 October, 2019; v1 submitted 19 February, 2019; originally announced February 2019.

Comments: 19 pages, 12 figures

Journal ref: Nature Electronics 2, 457 (2019)

Indirect to direct gap crossover in two-dimensional InSe revealed by ARPES

Authors: Matthew Hamer, Johanna Zultak, Anastasia V. Tyurnina, Viktor Zólyomi, Daniel Terry, Alexei Barinov, Alistair Garner, Jack Donoghue, Aidan P. Rooney, Viktor Kandyba, Alessio Giampietri, Abigail J. Graham, Natalie C. Teutsch, Xue Xia, Maciej Koperski, Sarah J. Haigh, Vladimir I. Fal'ko, Roman Gorbachev, Neil R. Wilson

Abstract: Atomically thin films of III-VI post-transition metal chalcogenides (InSe and GaSe) form an interesting class of two-dimensional semiconductor that feature strong variations of their band gap as a function of the number of layers in the crystal [1-4] and, specifically for InSe, an earlier predicted crossover from a direct gap in the bulk [5,6] to a weakly indirect band gap in monolayers and bilaye… ▽ More Atomically thin films of III-VI post-transition metal chalcogenides (InSe and GaSe) form an interesting class of two-dimensional semiconductor that feature strong variations of their band gap as a function of the number of layers in the crystal [1-4] and, specifically for InSe, an earlier predicted crossover from a direct gap in the bulk [5,6] to a weakly indirect band gap in monolayers and bilayers [7-11]. Here, we apply angle resolved photoemission spectroscopy with submicrometer spatial resolution ($μ$ARPES) to visualise the layer-dependent valence band structure of mechanically exfoliated crystals of InSe. We show that for 1 layer and 2 layer InSe the valence band maxima are away from the $\mathbfΓ$-point, forming an indirect gap, with the conduction band edge known to be at the $\mathbfΓ$-point. In contrast, for six or more layers the bandgap becomes direct, in good agreement with theoretical predictions. The high-quality monolayer and bilayer samples enables us to resolve, in the photoluminescence spectra, the band-edge exciton (A) from the exciton (B) involving holes in a pair of deeper valence bands, degenerate at $\mathbfΓ$, with the splitting that agrees with both $μ$ARPES data and the results of DFT modelling. Due to the difference in symmetry between these two valence bands, light emitted by the A-exciton should be predominantly polarised perpendicular to the plane of the two-dimensional crystal, which we have verified for few-layer InSe crystals. △ Less

Submitted 21 January, 2019; originally announced January 2019.

Journal ref: ACS Nano, 2019, 13, pp 2136-2142

Laser writable high-K dielectric for van der Waals nano-electronics

Authors: N. Peimyoo, M. D. Barnes, J. D. Mehew, A. De Sanctis, I. Amit, J. Escolar, K. Anastasiou, A. P. Rooney, S. J. Haigh, S. Russo, M. F. Craciun, F. Withers

Abstract: Like silicon-based semiconductor devices, van der Waals heterostructures will require integration with high-K oxides. This is needed to achieve suitable voltage scaling, improved performance as well as allowing for added functionalities. Unfortunately, commonly used high-k oxide deposition methods are not directly compatible with 2D materials. Here we demonstrate a method to embed a multi-function… ▽ More Like silicon-based semiconductor devices, van der Waals heterostructures will require integration with high-K oxides. This is needed to achieve suitable voltage scaling, improved performance as well as allowing for added functionalities. Unfortunately, commonly used high-k oxide deposition methods are not directly compatible with 2D materials. Here we demonstrate a method to embed a multi-functional few nm thick high-k oxide within van der Waals devices without degrading the properties of the neighbouring 2D materials. This is achieved by in-situ laser oxidation of embedded few layer HfS2 crystals. The resultant oxide is found to be in the amorphous phase with a dielectric constant of k~15 and break-down electric fields in the range of 0.5-0.6 V/nm. This transformation allows for the creation of a variety of fundamental nano-electronic and opto-electronic devices including, flexible Schottky barrier field effect transistors, dual gated graphene transistors as well as vertical light emitting and detecting tunnelling transistors. Furthermore, upon dielectric break-down, electrically conductive filaments are formed. This filamentation process can be used to electrically contact encapsulated conductive materials. Careful control of the filamentation process also allows for reversible switching between two resistance states. This allows for the creation of resistive switching random access memories (ReRAMs). We believe that this method of embedding a high-k oxide within complex van der Waals heterostructures could play an important role in future flexible multi-functional van der Waals devices. △ Less

Submitted 12 November, 2018; originally announced November 2018.

Comments: Accepted for publication in Science Advances

Convergent and divergent beam electron holography and reconstruction of adsorbates on free-standing two-dimensional crystals

Authors: Tatiana Latychevskaia, Colin Robert Woods, Yi Bo Wang, Matthew Holwill, Eric Prestat, Sarah J. Haigh, Kostya S. Novoselov

Abstract: Van der Waals heterostructures have been lately intensively studied because they offer a large variety of properties that can be controlled by selecting 2D materials and their sequence in the stack. The exact arrangement of the layers as well as the exact arrangement of the atoms within the layers, both are important for the properties of the resulting device. Recently it has been demonstrated tha… ▽ More Van der Waals heterostructures have been lately intensively studied because they offer a large variety of properties that can be controlled by selecting 2D materials and their sequence in the stack. The exact arrangement of the layers as well as the exact arrangement of the atoms within the layers, both are important for the properties of the resulting device. Recently it has been demonstrated that convergent beam electron diffraction (CBED) allows quantitative three-dimensional mapping of atomic positions in three-dimensional materials from a single CBED pattern. In this study we investigate CBED in more detail by simulating and performing various CBED regimes, with convergent and divergent wavefronts, on a somewhat simplified system: a 2D monolayer crystal. In CBED, each CBED spot is in fact an in-line hologram of the sample, where in-line holography is known to exhibit high intensity contrast in detection of weak phase objects that are not detectable in conventional in-focus imaging mode. Adsorbates exhibit strong intensity contrast in zero and higher order CBED spots, whereas lattice deformation such as strain or rippling cause noticeable intensity contrast only in the first and higher order CBED spots. The individual CBED spots can be reconstructed as typical in-line holograms, and the resolution of 2.13 A can be in principle achieved in the reconstructions. We provide simulated and experimental examples of CBED of a 2D monolayer crystal. The simulations show that individual CBED spots can be treated as in-line holograms and sample distributions such as adsorbates, can be reconstructed. Individual atoms can be reconstructed from a single CBED pattern provided the later exhibits high-order CBED spots. Examples of reconstructions obtained from experimental CBED patterns, at a resolution of 2.7 A, are shown. △ Less

Submitted 24 October, 2018; originally announced October 2018.

Journal ref: Frontiers of Physics 14(1), 13606 (2019)

Infrared-to-violet tunable optical activity in atomic films of GaSe, InSe, and their heterostructures

Authors: Daniel J. Terry, Viktor Zólyomi, Matthew Hamer, Anastasia V. Tyurnina, David G. Hopkinson, Alexander M. Rakowski, Samuel J. Magorrian, Nick Clark, Yuri M. Andreev, Olga Kazakova, Konstantin Novoselov, Sarah J. Haigh, Vladimir I. Fal'ko, Roman Gorbachev

Abstract: Two-dimensional semiconductors - atomic layers of materials with covalent intra-layer bonding and weak (van der Waals or quadrupole) coupling between the layers - are a new class of materials with great potential for optoelectronic applications. Among those, a special position is now being taken by post-transition metal chalcogenides (PTMC), InSe and GaSe. It has recently been found that the band… ▽ More Two-dimensional semiconductors - atomic layers of materials with covalent intra-layer bonding and weak (van der Waals or quadrupole) coupling between the layers - are a new class of materials with great potential for optoelectronic applications. Among those, a special position is now being taken by post-transition metal chalcogenides (PTMC), InSe and GaSe. It has recently been found that the band gap in 2D crystals of InSe more than doubles in the monolayer compared to thick multilayer crystals, while the high mobility of conduction band electrons is promoted by their light in-plane mass. Here, we use Raman and PL measurements of encapsulated few layer samples, coupled with accurate atomic force and transmission electron microscope structural characterisation to reveal new optical properties of atomically thin GaSe preserved by hBN encapsulation. The band gaps we observe complement the spectral range provided by InSe films, so that optical activity of these two almost lattice-matched PTMC films and their heterostructures densely cover the spectrum of photons from violet to infrared. We demonstrate the realisation of the latter by the first observation of interlayer excitonic photoluminescence in few-layer InSe-GaSe heterostructures. The spatially indirect transition is direct in k-space and therefore is bright, while its energy can be tuned in a broad range by the number of layers. △ Less

Submitted 3 October, 2018; originally announced October 2018.

Comments: 8 pages 4 figures

Journal ref: 2D Mater. 5 041009, 2018

Magnetoresistance in Co-hBN-NiFe tunnel junctions enhanced by resonant tunneling through single defects in ultrathin hBN barriers

Authors: Pablo U. Asshoff, Jose L. Sambricio, Sergey Slizovskiy, Aidan P. Rooney, Takashi Taniguchi, Kenji Watanabe, Sarah J. Haigh, Vladimir Fal'ko, Irina V. Grigorieva, Ivan J. Vera-Marun

Abstract: Hexagonal boron nitride (hBN) is a prototypical high-quality two-dimensional insulator and an ideal material to study tunneling phenomena, as it can be easily integrated in vertical van der Waals devices. For spintronic devices, its potential has been demonstrated both for efficient spin injection in lateral spin valves and as a barrier in magnetic tunnel junctions (MTJs). Here we reveal the effec… ▽ More Hexagonal boron nitride (hBN) is a prototypical high-quality two-dimensional insulator and an ideal material to study tunneling phenomena, as it can be easily integrated in vertical van der Waals devices. For spintronic devices, its potential has been demonstrated both for efficient spin injection in lateral spin valves and as a barrier in magnetic tunnel junctions (MTJs). Here we reveal the effect of point defects inevitably present in mechanically exfoliated hBN on the tunnel magnetoresistance of Co-hBN-NiFe MTJs. We observe a clear enhancement of both the conductance and magnetoresistance of the junction at well-defined bias voltages, indicating resonant tunneling through magnetic (spin-polarized) defect states. The spin polarization of the defect states is attributed to exchange coupling of a paramagnetic impurity in the few-atomic-layer thick hBN to the ferromagnetic electrodes. This is confirmed by excellent agreement with theoretical modelling. Our findings should be taken into account in analyzing tunneling processes in hBN-based magnetic devices. More generally, our study shows the potential of using atomically thin hBN barriers with defects to engineer the magnetoresistance of MTJs and to achieve spin filtering, opening the door towards exploiting the spin degree of freedom in current studies of point defects as quantum emitters. △ Less

Submitted 3 October, 2018; originally announced October 2018.

Journal ref: Nano Lett., 2018

Anomalous twin boundaries in 2D materials

Authors: A. P. Rooney, Z. Li, W. Zhao, A. Gholinia, A. Kosikov, G. Auton, F. Ding, R. V. Gorbachev, R. J. Young, S. J Haigh

Abstract: The high mechanical strength and excellent flexibility of 2D materials such as graphene are some of their most important properties [1]. Good flexibility is key for exploiting 2D materials in many emerging technologies, such as wearable electronics, bioelectronics, protective coatings and composites [1] and recently bending has been suggested as a route to tune electronic transport behaviour [2].… ▽ More The high mechanical strength and excellent flexibility of 2D materials such as graphene are some of their most important properties [1]. Good flexibility is key for exploiting 2D materials in many emerging technologies, such as wearable electronics, bioelectronics, protective coatings and composites [1] and recently bending has been suggested as a route to tune electronic transport behaviour [2]. For virtually all crystalline materials macroscopic deformation is accommodated by the movement of dislocations and through the formation of twinning defects [3]; it is the geometry of the resulting microstructure that largely determines the mechanical and electronic properties. Despite this, the atomic microstructure of 2D materials after mechanical deformation has not been widely investigated: only by understanding these deformed microstructures can the resulting properties be accurately predicted and controlled. In this paper we describe the different structural features that can form as a result of bending in van der Waals (vdW) crystals of 2D materials. We show that twin boundaries, an important class of crystal defect, are delocalised by several nm and not atomically sharp as has been assumed for over half a century [4]. In addition, we demonstrate that different classes of microstructure are present in the deformed material and can be predicted from just the atomic structure, bend angle, and flake thickness. We anticipate that this new knowledge of the deformation structure for 2D materials will provide foundations for tailoring transport behaviour[2], mechanical properties, liquid-phase [5,6] and scotch-tape exfoliation [7,8], and crystal growth. △ Less

Submitted 1 September, 2018; originally announced September 2018.

Comments: 18 pages, 5 figures

Convergent beam electron holography for analysis of van der Waals heterostructures

Authors: Tatiana Latychevskaia, Colin Robert Woods, Yi Bo Wang, Matthew Holwill, Eric Prestat, Sarah J. Haigh, Kostya S. Novoselov

Abstract: Van der Waals heterostructures, which explore the synergetic properties of two-dimensional (2D) materials when assembled into three-dimensional stacks, have already brought to life a number of exciting new phenomena and novel electronic devices. Still, the interaction between the layers in such assembly, possible surface reconstruction, intrinsic and extrinsic defects are very difficult to charact… ▽ More Van der Waals heterostructures, which explore the synergetic properties of two-dimensional (2D) materials when assembled into three-dimensional stacks, have already brought to life a number of exciting new phenomena and novel electronic devices. Still, the interaction between the layers in such assembly, possible surface reconstruction, intrinsic and extrinsic defects are very difficult to characterise by any method, because of the single-atomic nature of the crystals involved. Here we present a convergent beam electron holographic technique which allows imaging of the stacking order in such heterostructures. Based on the interference of electron waves scattered on different crystals in the stack, this approach allows one to reconstruct the relative rotation, stretching, out-of-plane corrugation of the layers with atomic precision. Being holographic in nature, our approach allows extraction of quantitative information about the three-dimensional structure of the typical defects from a single image covering thousands of square nanometres. Furthermore, qualitative information about the defects in the stack can be extracted from the convergent diffraction patterns even without reconstruction - simply by comparing the patterns in different diffraction spots. We expect that convergent beam electron holography will be widely used to study the properties of van der Waals heterostructures. △ Less

Submitted 5 July, 2018; originally announced July 2018.

Journal ref: Proceedings of the National Academy of Sciences, Volume 115, Issue 29, pages 7473-7478, 2018

Ballistic molecular transport through two-dimensional channels

Authors: A. Keerthi, A. K. Geim, A. Janardanan, A. P. Rooney, A. Esfandiar, S. Hu, S. A. Dar, I. V. Grigorieva, S. J. Haigh, F. C. Wang, B. Radha

Abstract: Gas permeation through nanoscale pores is ubiquitous in nature and plays an important role in a plethora of technologies. Because the pore size is typically smaller than the mean free path of gas molecules, their flow is conventionally described by the Knudsen theory that assumes diffuse reflection (random-angle scattering) at confining walls. This assumption has proven to hold surprisingly well i… ▽ More Gas permeation through nanoscale pores is ubiquitous in nature and plays an important role in a plethora of technologies. Because the pore size is typically smaller than the mean free path of gas molecules, their flow is conventionally described by the Knudsen theory that assumes diffuse reflection (random-angle scattering) at confining walls. This assumption has proven to hold surprisingly well in experiment, and only a few cases of partially specular (mirror-like) reflection are known. Here we report gas transport through angstrom-scale channels with atomically-flat walls and show that surface scattering can be both diffuse or specular, depending on fine details of the surface atomic landscape, and quantum effects contribute to the specularity at room temperature. The channels made from graphene or boron nitride allow a helium gas flow that is orders of magnitude faster than expected from the theory. This is explained by specular surface scattering, which leads to ballistic transport and frictionless gas flow. Similar channels but with molybdenum disulfide walls exhibit much slower permeation that remains well described by Knudsen diffusion. The difference is attributed to stronger atomic corrugations at MoS2 surfaces, which are similar in height to the size of transported atoms and their de Broglie wavelength. The importance of the latter, matter-wave contribution is corroborated by the observation of a reversed isotope effect in which the mass flow of hydrogen is notably higher than that of deuterium, in contrast to the relation expected for classical flows. Our results provide insights into atomistic details of molecular permeation, which so far could be accessed only in simulations, and show a possibility of studying gas transport under a controlled confinement comparable to the quantum-mechanical size of atoms. △ Less

Submitted 15 May, 2018; originally announced May 2018.

Journal ref: Nature 558,420-424 (2018)

Transport of hydrogen isotopes through interlayer spacing in van der Waals crystals

Authors: S. Hu, K. Gopinadhan, A. Rakowski, M. Neek-Amal, T. Heine, I. V. Grigorieva, S. J. Haigh, F. M. Peeters, A. K. Geim, M. Lozada-Hidalgo

Abstract: Atoms start behaving as waves rather than classical particles if confined in spaces commensurate with their de Broglie wavelength. At room temperature this length is only about one angstrom even for the lightest atom, hydrogen. This restricts quantum-confinement phenomena for atomic species to the realm of very low temperatures. Here we show that van der Waals gaps between atomic planes of layered… ▽ More Atoms start behaving as waves rather than classical particles if confined in spaces commensurate with their de Broglie wavelength. At room temperature this length is only about one angstrom even for the lightest atom, hydrogen. This restricts quantum-confinement phenomena for atomic species to the realm of very low temperatures. Here we show that van der Waals gaps between atomic planes of layered crystals provide angstrom-size channels that make quantum confinement of protons apparent even at room temperature. Our transport measurements show that thermal protons experience a notably higher barrier than deuterons when entering van der Waals gaps in hexagonal boron nitride and molybdenum disulfide. This is attributed to the difference in de Broglie wavelength of the isotopes. Once inside the crystals, transport of both isotopes can be described by classical diffusion, albeit with unexpectedly fast rates, comparable to that of protons in water. The demonstrated angstrom-size channels can be exploited for further studies of atomistic quantum confinement and, if the technology can be scaled up, for sieving hydrogen isotopes. △ Less

Submitted 9 February, 2018; originally announced February 2018.

Nanometer Resolution Elemental Mapping in Graphene-based TEM Liquid Cells

Authors: Daniel J. Kelly, Mingwei Zhou, Nick Clark, Matthew J. Hamer, Edward A. Lewis, Alexander M. Rakowski, Sarah J. Haigh, Roman V. Gorbachev

Abstract: We demonstrate a new design of graphene liquid cell consisting of a thin lithographically patterned hexagonal boron nitride crystal encapsulated from both sides with graphene windows. The ultra-thin window liquid cells produced have precisely controlled volumes and thicknesses, and are robust to repeated vacuum cycling. This technology enables exciting new opportunities for liquid cell studies, pr… ▽ More We demonstrate a new design of graphene liquid cell consisting of a thin lithographically patterned hexagonal boron nitride crystal encapsulated from both sides with graphene windows. The ultra-thin window liquid cells produced have precisely controlled volumes and thicknesses, and are robust to repeated vacuum cycling. This technology enables exciting new opportunities for liquid cell studies, providing a reliable platform for high resolution transmission electron microscope imaging and spectral mapping. The presence of water was confirmed using electron energy loss spectroscopy (EELS) via the detection of the oxygen K-edge and measuring the thickness of full and empty cells. We demonstrate the imaging capabilities of these liquid cells by tracking the dynamic motion and interactions of small metal nanoparticles with diameters of 0.5-5 nm. We further present an order of magnitude improvement in the analytical capabilities compared to previous liquid cell data, with 1 nm spatial resolution elemental mapping achievable for liquid encapsulated bimetallic nanoparticles using energy dispersive X-ray spectroscopy (EDXS). △ Less

Submitted 18 October, 2017; originally announced October 2017.

Comments: 25 pages, 4 figures

Observing imperfection in atomic interfaces for van der Waals heterostructures

Authors: Aidan. P. Rooney, Aleksey Kozikov, Alexander N. Rudenko, Eric Prestat, Matthew J Hamer, Freddie Withers, Yang Cao, Kostya S. Novoselov, Mikhail I. Katsnelson, Roman Gorbachev, Sarah J. Haigh

Abstract: Vertically stacked van der Waals heterostructures are a lucrative platform for exploring the rich electronic and optoelectronic phenomena in two-dimensional materials. Their performance will be strongly affected by impurities and defects at the interfaces. Here we present the first systematic study of interfaces in van der Waals heterostructure using cross sectional scanning transmission electron… ▽ More Vertically stacked van der Waals heterostructures are a lucrative platform for exploring the rich electronic and optoelectronic phenomena in two-dimensional materials. Their performance will be strongly affected by impurities and defects at the interfaces. Here we present the first systematic study of interfaces in van der Waals heterostructure using cross sectional scanning transmission electron microscope (STEM) imaging. By measuring interlayer separations and comparing these to density functional theory (DFT) calculations we find that pristine interfaces exist between hBN and MoS2 or WS2 for stacks prepared by mechanical exfoliation in air. However, for two technologically important transition metal dichalcogenide (TMDC) systems, MoSe2 and WSe2, our measurement of interlayer separations provide the first evidence for impurity species being trapped at buried interfaces with hBN: interfaces which are flat at the nanometer length scale. While decreasing the thickness of encapsulated WSe2 from bulk to monolayer we see a systematic increase in the interlayer separation. We attribute these differences to the thinnest TMDC flakes being flexible and hence able to deform mechanically around a sparse population of protruding interfacial impurities. We show that the air sensitive two dimensional (2D) crystal NbSe2 can be fabricated into heterostructures with pristine interfaces by processing in an inert-gas environment. Finally we find that adopting glove-box transfer significantly improves the quality of interfaces for WSe2 compared to processing in air. △ Less

Submitted 25 July, 2017; originally announced July 2017.

Journal ref: Nano Lett 2017, 17 (9), pp 5222

Tuneable Sieving of Ions Using Graphene Oxide Membranes

Authors: J. Abraham, K. S. Vasu, C. D. Williams, K. Gopinadhan, Y. Su, C. Cherian, J. Dix, E. Prestat, S. J. Haigh, I. V. Grigorieva, P. Carbone, A. K. Geim, R. R. Nair

Abstract: Graphene oxide membranes show exceptional molecular permeation properties, with a promise for many applications. However, their use in ion sieving and desalination technologies is limited by a permeation cutoff of ~9 Angstrom, which is larger than hydrated ion diameters for common salts. The cutoff is determined by the interlayer spacing d ~13.5 Angstrom, typical for graphene oxide laminates that… ▽ More Graphene oxide membranes show exceptional molecular permeation properties, with a promise for many applications. However, their use in ion sieving and desalination technologies is limited by a permeation cutoff of ~9 Angstrom, which is larger than hydrated ion diameters for common salts. The cutoff is determined by the interlayer spacing d ~13.5 Angstrom, typical for graphene oxide laminates that swell in water. Achieving smaller d for the laminates immersed in water has proved to be a challenge.Here we describe how to control d by physical confinement and achieve accurate and tuneable ion sieving. Membranes with d from ~ 9.8 Angstrom to 6.4 Angstrom are demonstrated, providing the sieve size smaller than typical ions' hydrated diameters.In this regime, ion permeation is found to be thermally activated with energy barriers of ~10-100 kJ/mol depending on d. Importantly, permeation rates decrease exponentially with decreasing the sieve size but water transport is weakly affected (by a factor of <2). The latter is attributed to a low barrier for water molecules entry and large slip lengths inside graphene capillaries. Building on these findings, we demonstrate a simple scalable method to obtain graphene-based membranes with limited swelling, which exhibit 97% rejection for NaCl. △ Less

Submitted 19 January, 2017; originally announced January 2017.

Journal ref: Nature Nanotechnology 12, 546-550, 2017

Phase segregation facilitates exfoliation of franckeite crystals to a single unit cell thickness

Authors: Matěj Velický, Peter S. Toth, Alexander M. Rakowski, Aidan P. Rooney, Aleksey Kozikov, Artem Mishchenko, Colin R. Woods, Thanasis Georgiou, Sarah J. Haigh, Kostya S. Novoselov, Robert A. W. Dryfe

Abstract: Weak interlayer van der Waals interactions in bulk crystals facilitate their mechanical exfoliation to monolayer and few-layer two-dimensional (2D) materials, which exhibit striking physical phenomena absent in their bulk form. Here we study a 2D form of a mineral franckeite and show that phase segregation into discrete layers at the sub-nanometre scale facilitates its layered structure and basal… ▽ More Weak interlayer van der Waals interactions in bulk crystals facilitate their mechanical exfoliation to monolayer and few-layer two-dimensional (2D) materials, which exhibit striking physical phenomena absent in their bulk form. Here we study a 2D form of a mineral franckeite and show that phase segregation into discrete layers at the sub-nanometre scale facilitates its layered structure and basal cleavage. This behaviour is likely to be common in a wider family of complex crystals and could be exploited for a single-step synthesis of van der Waals heterostructures, as an alternative to stacking of 2D materials. Mechanical exfoliation allowed us to produce crystals down to a single unit cell thickness and rationalise its basal cleavage by atomic-resolution scanning transmission electron microscopy (STEM). We demonstrate p-type electrical conductivity and remarkable electrochemical properties in exfoliated crystals, which shows promise for energy storage applications. △ Less

Submitted 8 December, 2016; originally announced December 2016.

Comments: Main text: 19 pages, 5 figures; Supplementary Information: 19 pages, 10 figures

Journal ref: Nature Communications 8 (2017) 14410

Magnetoresistance of vertical Co-graphene-NiFe junctions controlled by charge transfer and proximity-induced spin splitting in graphene

Authors: P. U. Asshoff, J. L. Sambricio, A. P. Rooney, S. Slizovskiy, A. Mishchenko, A. M. Rakowski, E. W. Hill, A. K. Geim, S. J. Haigh, V. I. Fal'ko, I. J. Vera-Marun, I. V. Grigorieva

Abstract: Graphene is hailed as an ideal material for spintronics due to weak intrinsic spin-orbit interaction that facilitates lateral spin transport and tunability of its electronic properties, including a possibility to induce magnetism in graphene. Another promising application of graphene is related to its use as a spacer separating ferromagnetic metals (FMs) in vertical magnetoresistive devices, the m… ▽ More Graphene is hailed as an ideal material for spintronics due to weak intrinsic spin-orbit interaction that facilitates lateral spin transport and tunability of its electronic properties, including a possibility to induce magnetism in graphene. Another promising application of graphene is related to its use as a spacer separating ferromagnetic metals (FMs) in vertical magnetoresistive devices, the most prominent class of spintronic devices widely used as magnetic sensors. In particular, few-layer graphene was predicted to act as a perfect spin filter. Here we show that the role of graphene in such devices (at least in the absence of epitaxial alignment between graphene and the FMs) is different and determined by proximity-induced spin splitting and charge transfer with adjacent ferromagnetic metals, making graphene a weak FM electrode rather than a spin filter. To this end, we report observations of magnetoresistance (MR) in vertical Co-graphene-NiFe junctions with 1 to 4 graphene layers separating the ferromagnets, and demonstrate that the dependence of the MR sign on the number of layers and its inversion at relatively small bias voltages is consistent with spin transport between weakly doped and differently spin-polarized layers of graphene. The proposed interpretation is supported by the observation of an MR sign reversal in biased Co-graphene-hBN-NiFe devices and by comprehensive structural characterization. Our results suggest a new architecture for vertical devices with electrically controlled MR. △ Less

Submitted 16 June, 2017; v1 submitted 4 July, 2016; originally announced July 2016.

Comments: 12 pages, 6 figures, Supplementary Information (6 Supplementary Notes, 11 supplementary figures)

Journal ref: 2D Mater. 4, 031004 (2017)

Molecular transport through capillaries made with atomic-scale precision

Authors: B. Radha, A. Esfandiar, F. C. Wang, A. P. Rooney, K. Gopinadhan, A. Keerthi, A. Mishchenko, A. Janardanan, P. Blake, L. Fumagalli, M. Lozada-Hidalgo, S. Garaj, S. J. Haigh, I. V. Grigorieva, H. A. Wu, A. K. Geim

Abstract: Nanometre-scale pores and capillaries have long been studied because of their importance in many natural phenomena and their use in numerous applications. A more recent development is the ability to fabricate artificial capillaries with nanometre dimensions, which has enabled new research on molecular transport and led to the emergence of nanofluidics. But surface roughness in particular makes it… ▽ More Nanometre-scale pores and capillaries have long been studied because of their importance in many natural phenomena and their use in numerous applications. A more recent development is the ability to fabricate artificial capillaries with nanometre dimensions, which has enabled new research on molecular transport and led to the emergence of nanofluidics. But surface roughness in particular makes it challenging to produce capillaries with precisely controlled dimensions at this spatial scale. Here we report the fabrication of narrow and smooth capillaries through van der Waals assembly, with atomically flat sheets at the top and bottom separated by spacers made of two-dimensional crystals with a precisely controlled number of layers. We use graphene and its multilayers as archetypal two-dimensional materials to demonstrate this technology, which produces structures that can be viewed as if individual atomic planes had been removed from a bulk crystal to leave behind flat voids of a height chosen with atomic-scale precision. Water transport through the channels, ranging in height from one to several dozen atomic planes, is characterized by unexpectedly fast flow (up to 1 metre per second) that we attribute to high capillary pressures (about 1,000 bar) and large slip lengths. For channels that accommodate only a few layers of water, the flow exhibits a marked enhancement that we associate with an increased structural order in nanoconfined water. Our work opens up an avenue to making capillaries and cavities with sizes tunable to ångström precision, and with permeation properties further controlled through a wide choice of atomically flat materials available for channel walls. △ Less

Submitted 8 September, 2016; v1 submitted 29 June, 2016; originally announced June 2016.

Journal ref: Nature 538, 222-225 (2016)

Van der Waals pressure and its effect on trapped interlayer molecules

Authors: K. S. Vasu, E. Prestat, J. Abraham, J. Dix, R. J. Kashtiban, J. Beheshtian, J. Sloan, P. Carbone, M. Neek-Amal, S. J. Haigh, A. K. Geim, R. R. Nair

Abstract: Van der Waals assembly of two-dimensional (2D) crystals continue attract intense interest due to the prospect of designing novel materials with on-demand properties. One of the unique features of this technology is the possibility of trapping molecules or compounds between 2D crystals. The trapped molecules are predicted to experience pressures as high as 1 GPa. Here we report measurements of this… ▽ More Van der Waals assembly of two-dimensional (2D) crystals continue attract intense interest due to the prospect of designing novel materials with on-demand properties. One of the unique features of this technology is the possibility of trapping molecules or compounds between 2D crystals. The trapped molecules are predicted to experience pressures as high as 1 GPa. Here we report measurements of this interfacial pressure by capturing pressure-sensitive molecules and studying their structural and conformational changes. Pressures of 1.2 +/- 0.3 GPa are found using Raman spectrometry for molecular layers of one nanometer in thickness. We further show that this pressure can induce chemical reactions and several trapped salts or compounds are found to react with water at room temperature, leading to 2D crystals of the corresponding oxides. This pressure and its effect should be taken into account in studies of van der Waals heterostructures and can also be exploited to modify materials confined at the atomic interfaces. △ Less

Submitted 23 May, 2016; originally announced May 2016.

Journal ref: Nature Communications 7, Article number: 12168 (2016)

WSe2 light-emitting tunneling transistors with enhanced brightness at room temperature

Authors: F. Withers, O. Del Pozo-Zamudio, S. Schwarz, S. Dufferwiel, P. M. Walker, T. Godde, A. P. Rooney, A. Gholinia, C. R. Woods, P. Blake, S. J. Haigh, K. Watanabe, T. Taniguchi, I. L. Aleiner, A. K. Geim, V. I. Falko, A. I. Tartakovskii, K. S. Novoselov

Abstract: Monolayers of molybdenum and tungsten dichalcogenides are direct bandgap semiconductors, which makes them promising for opto-electronic applications. In particular, van der Waals heterostructures consisting of monolayers of MoS2 sandwiched between atomically thin hexagonal boron nitride (hBN) and graphene electrodes allows one to obtain light emitting quantum wells (LEQWs) with low-temperature ext… ▽ More Monolayers of molybdenum and tungsten dichalcogenides are direct bandgap semiconductors, which makes them promising for opto-electronic applications. In particular, van der Waals heterostructures consisting of monolayers of MoS2 sandwiched between atomically thin hexagonal boron nitride (hBN) and graphene electrodes allows one to obtain light emitting quantum wells (LEQWs) with low-temperature external quantum efficiency (EQE) of 1%. However, the EQE of MoS2 and MoSe2-based LEQWs shows behavior common for many other materials: it decreases fast from cryogenic conditions to room temperature, undermining their practical applications. Here we compare MoSe2 and WSe2 LEQWs. We show that the EQE of WSe2 devices grows with temperature, with room temperature EQE reaching 5%, which is 250x more than the previous best performance of MoS2 and MoSe2 quantum wells in ambient conditions. We attribute such a different temperature dependences to the inverted sign of spin-orbit splitting of conduction band states in tungsten and molybdenum dichalcogenides, which makes the lowest-energy exciton in WSe2 dark. △ Less

Submitted 19 November, 2015; originally announced November 2015.

An in- and ex-situ TEM study into the oxidisation of titanium (IV) sulphide

Authors: Edmund Long, Sean O'Brien, Edward A. Lewis, Eric Prestat, Clive Downing, Clotilde S. Cucinotta, Stefano Sanvito, Sarah J. Haigh, Valeria Nicolosi

Abstract: The degradation of liquid dispersed titanium (IV) sulphide (TiS$_2$) is studied from the point of view of oxidisation. TiS$_2$ is a layered two-dimensional nanomaterial, with potential for energy storage applications. However, flakes in dispersion were observed to degrade. We examined two oxidisation routes: deionised water at room temperature and oxygen gas within the temperature range 150-350°C.… ▽ More The degradation of liquid dispersed titanium (IV) sulphide (TiS$_2$) is studied from the point of view of oxidisation. TiS$_2$ is a layered two-dimensional nanomaterial, with potential for energy storage applications. However, flakes in dispersion were observed to degrade. We examined two oxidisation routes: deionised water at room temperature and oxygen gas within the temperature range 150-350°C. Water was seen to slowly oxidise flakes inwards from the edge, forming an amorphous oxide, a result comparable to the state of flakes which degraded within the original dispersion. Oxygen gas was seen to rapidly oxidise entire flakes to a polycrystalline oxide, when heated 275 °C and above. Degradation was studied with scanning transmission electron microscopy (STEM), energy dispersed x-ray spectroscopy (EDX) and electron energy-loss spectroscopy (EELS). Density Functional Theory calculations have shown oxidisation by both water and gas molecules to be thermodynamically favourable. △ Less

Submitted 29 May, 2015; originally announced May 2015.

Comments: 15 pages, 7 figures

Quality heterostructures from two dimensional crystals unstable in air by their assembly in inert atmosphere

Authors: Y. Cao, A. Mishchenko, G. L. Yu, K. Khestanova, A. Rooney, E. Prestat, A. V. Kretinin, P. Blake, M. B. Shalom, G. Balakrishnan, I. V. Grigorieva, K. S. Novoselov, B. A. Piot, M. Potemski, K. Watanabe, T. Taniguchi, S. J. Haigh, A. K. Geim, R. V. Gorbachev

Abstract: Many layered materials can be cleaved down to individual atomic planes, similar to graphene, but only a small minority of them are stable under ambient conditions. The rest reacts and decomposes in air, which has severely hindered their investigation and possible uses. Here we introduce a remedial approach based on cleavage, transfer, alignment and encapsulation of air-sensitive crystals, all insi… ▽ More Many layered materials can be cleaved down to individual atomic planes, similar to graphene, but only a small minority of them are stable under ambient conditions. The rest reacts and decomposes in air, which has severely hindered their investigation and possible uses. Here we introduce a remedial approach based on cleavage, transfer, alignment and encapsulation of air-sensitive crystals, all inside a controlled inert atmosphere. To illustrate the technology, we choose two archetypal two-dimensional crystals unstable in air: black phosphorus and niobium diselenide. Our field-effect devices made from their monolayers are conductive and fully stable under ambient conditions, in contrast to the counterparts processed in air. NbSe2 remains superconducting down to the monolayer thickness. Starting with a trilayer, phosphorene devices reach sufficiently high mobilities to exhibit Landau quantization. The approach offers a venue to significantly expand the range of experimentally accessible two-dimensional crystals and their heterostructures. △ Less

Submitted 12 February, 2015; originally announced February 2015.

Comments: 4 figures

Journal ref: Nano Letters 15 (8), pp 4914 - 4921 (2015)