Showing 1–50 of 51 results for author: Furukawa, K

Modeling and Mathematical Analysis of the Clogging Phenomenon in Filtration Filters Installed in Aquaria

Authors: Ken Furukawa, Hiroyuki Kitahata

Abstract: This paper proposes a mathematical model for replicating a simple dynamics in an aquarium with two components; bacteria and organic matter. The model is based on a system of partial differential equations (PDEs) with four components: the drift-diffusion equation, the dynamic boundary condition, the fourth boundary condition, and the prey-predator model. The system of PDEs is structured to represen… ▽ More This paper proposes a mathematical model for replicating a simple dynamics in an aquarium with two components; bacteria and organic matter. The model is based on a system of partial differential equations (PDEs) with four components: the drift-diffusion equation, the dynamic boundary condition, the fourth boundary condition, and the prey-predator model. The system of PDEs is structured to represent typical dynamics, including the increase of organic matter in the aquarium due to the excretion of organisms ($e.g$. fish), its adsorption into the filtration filter, and the decomposition action of the organic matter both on the filtration filter and within the aquarium. In this paper, we prove the well-posedness of the system and show some results of numerical experiments. The numerical experiments provide a validity of the modeling and demonstrate filter clogging phenomena. We compare the feeding rate with the filtration performance of the filter. The model exhibits convergence to a bounded steady state when the feed rate is reasonable, and grow up to an unbounded solution when the feeding is excessively high. The latter corresponds to the clogging phenomenon of the filter. △ Less

Submitted 20 January, 2024; originally announced January 2024.

The three limits of the hydrostatic approximation

Authors: Ken Furukawa, Yoshikazu Giga, Matthias Hieber, Amru Hussein, Takahito Kashiwabara, Marc Wrona

Abstract: The primitive equations are derived from the $3D$-Navier-Stokes equations by the hydrostatic approximation. Formally, assuming an $\varepsilon$-thin domain and anisotropic viscosities with vertical viscosity $ν_z=\mathcal{O}(\varepsilon^γ)$ where $γ=2$, one obtains the primitive equations with full viscosity as $\varepsilon\to 0$. Here, we take two more limit equations into consideration: For… ▽ More The primitive equations are derived from the $3D$-Navier-Stokes equations by the hydrostatic approximation. Formally, assuming an $\varepsilon$-thin domain and anisotropic viscosities with vertical viscosity $ν_z=\mathcal{O}(\varepsilon^γ)$ where $γ=2$, one obtains the primitive equations with full viscosity as $\varepsilon\to 0$. Here, we take two more limit equations into consideration: For $γ<2$ the $2D$-Navier-Stokes equations are obtained. For $γ>2$ the primitive equations with only horizontal viscosity $-Δ_H$ as $\varepsilon\to 0$. Thus, there are three possible limits of the hydrostatic approximation depending on the assumption on the vertical viscosity. The latter convergence has been proven recently by Li, Titi, and Yuan using energy estimates. Here, we consider more generally $ν_z=\varepsilon^2 δ$ and show how maximal regularity methods and quadratic inequalities can be an efficient approach to the same end for $\varepsilon,δ\to 0$. The flexibility of our methods is also illustrated by the convergence for $δ\to \infty$ and $\varepsilon\to 0$ to the $2D$-Navier-Stokes equations. △ Less

Submitted 6 December, 2023; originally announced December 2023.

Comments: 29 pages, 2 figures

MSC Class: Primary: 35Q35; Secondary: 47D06; 86A05

Beam Operation for Particle Physics and Photon Science with Pulse-to-Pulse Modulation at KEK injector LINAC

Authors: Kazuro Furukawa, Masanori Satoh, Injector LINAC group

Abstract: The electron and positron accelerator complex at KEK offers unique experimental opportunities in the fields of elementary particle physics with SuperKEKB collider and photon science with two light sources. In order to maximize the experimental performances at those facilities the injector LINAC employs pulse-to-pulse modulation at 50 Hz, injecting beams with diverse properties. The event-based con… ▽ More The electron and positron accelerator complex at KEK offers unique experimental opportunities in the fields of elementary particle physics with SuperKEKB collider and photon science with two light sources. In order to maximize the experimental performances at those facilities the injector LINAC employs pulse-to-pulse modulation at 50 Hz, injecting beams with diverse properties. The event-based control system effectively manages different beam configurations. This injection scheme was initially designed 15 years ago and has been in full operation since 2019. Over the years, quite a few enhancements have been implemented. As the event-based controls are tightly coupled with microwave systems, machine protection systems and so on, their modifications require meticulous planning. However, the diverse requirements from particle physics and photon science, stemming from the distinct nature of those experiments, often necessitate patient negotiation to meet the demands of both fields. This presentation discusses those operational aspects of the multidisciplinary facility. △ Less

Submitted 4 December, 2023; originally announced December 2023.

Comments: 5 figures, LaTeX, a contribution to ICALEPCS2023, Cape Town, South Africa, TUPDP046

Report number: KEK Preprint 2023-40

Journal ref: Proceedings of the 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS2023), Cape Town, South Africa, 09-13 October 2023, pp.627-630, paperID:TUPDP046

Symbol emergence as interpersonal cross-situational learning: the emergence of lexical knowledge with combinatoriality

Authors: Yoshinobu Hagiwara, Kazuma Furukawa, Takafumi Horie, Akira Taniguchi, Tadahiro Taniguchi

Abstract: We present a computational model for a symbol emergence system that enables the emergence of lexical knowledge with combinatoriality among agents through a Metropolis-Hastings naming game and cross-situational learning. Many computational models have been proposed to investigate combinatoriality in emergent communication and symbol emergence in cognitive and developmental robotics. However, existi… ▽ More We present a computational model for a symbol emergence system that enables the emergence of lexical knowledge with combinatoriality among agents through a Metropolis-Hastings naming game and cross-situational learning. Many computational models have been proposed to investigate combinatoriality in emergent communication and symbol emergence in cognitive and developmental robotics. However, existing models do not sufficiently address category formation based on sensory-motor information and semiotic communication through the exchange of word sequences within a single integrated model. Our proposed model facilitates the emergence of lexical knowledge with combinatoriality by performing category formation using multimodal sensory-motor information and enabling semiotic communication through the exchange of word sequences among agents in a unified model. Furthermore, the model enables an agent to predict sensory-motor information for unobserved situations by combining words associated with categories in each modality. We conducted two experiments with two humanoid robots in a simulated environment to evaluate our proposed model. The results demonstrated that the agents can acquire lexical knowledge with combinatoriality through interpersonal cross-situational learning based on the Metropolis-Hastings naming game and cross-situational learning. Furthermore, our results indicate that the lexical knowledge developed using our proposed model exhibits generalization performance for novel situations through interpersonal cross-modal inference. △ Less

Submitted 27 June, 2023; originally announced June 2023.

KST-Mixer: Kinematic Spatio-Temporal Data Mixer For Colon Shape Estimation

Authors: Masahiro Oda, Kazuhiro Furukawa, Nassir Navab, Kensaku Mori

Abstract: We propose a spatio-temporal mixing kinematic data estimation method to estimate the shape of the colon with deformations caused by colonoscope insertion. Endoscope tracking or a navigation system that navigates physicians to target positions is needed to reduce such complications as organ perforations. Although many previous methods focused to track bronchoscopes and surgical endoscopes, few numb… ▽ More We propose a spatio-temporal mixing kinematic data estimation method to estimate the shape of the colon with deformations caused by colonoscope insertion. Endoscope tracking or a navigation system that navigates physicians to target positions is needed to reduce such complications as organ perforations. Although many previous methods focused to track bronchoscopes and surgical endoscopes, few number of colonoscope tracking methods were proposed. This is because the colon largely deforms during colonoscope insertion. The deformation causes significant tracking errors. Colon deformation should be taken into account in the tracking process. We propose a colon shape estimation method using a Kinematic Spatio-Temporal data Mixer (KST-Mixer) that can be used during colonoscope insertions to the colon. Kinematic data of a colonoscope and the colon, including positions and directions of their centerlines, are obtained using electromagnetic and depth sensors. The proposed method separates the data into sub-groups along the spatial and temporal axes. The KST-Mixer extracts kinematic features and mix them along the spatial and temporal axes multiple times. We evaluated colon shape estimation accuracies in phantom studies. The proposed method achieved 11.92 mm mean Euclidean distance error, the smallest of the previous methods. Statistical analysis indicated that the proposed method significantly reduced the error compared to the previous methods. △ Less

Submitted 2 February, 2023; originally announced February 2023.

Comments: Accepted paper as an oral presentation at Joint MICCAI workshop 2022, AE-CAI/CARE/OR2.0. Received the Outstanding Paper Award

Journal ref: Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization, 2023

Data Assimilation to the Primitive Equations with $L^p$-$L^q$-based Maximal Regularity Approach

Authors: Ken Furukawa

Abstract: In this paper, we show mathematical justification of the data assimilation of nudging type in $L^p$-$L^q$ maximal regularity settings. We prove that the approximate solution of the primitive equations by data assimilation converges to the true solution with exponential order on the Besov space $B^{2/q}_{q,p}(Ω)$ in the periodic layer domain $Ω= \mathbb{T}^2 \times (-h, 0)$. In this paper, we show mathematical justification of the data assimilation of nudging type in $L^p$-$L^q$ maximal regularity settings. We prove that the approximate solution of the primitive equations by data assimilation converges to the true solution with exponential order on the Besov space $B^{2/q}_{q,p}(Ω)$ in the periodic layer domain $Ω= \mathbb{T}^2 \times (-h, 0)$. △ Less

Submitted 26 August, 2022; originally announced August 2022.

Achievement of 200,000 hours of operation at KEK 7-GeV electron 4-GeV positron injector linac

Authors: Kazuro Furukawa, Mitsuo Akemoto, Dai Arakawa, Yoshio Arakida, Yusei Bando, Hiroyasu Ego, Yoshinori Enomoto, Toshiyasu Higo, Hiroyuki Honma, Naoko Iida, Kazuhisa Kakihara, Takuya Kamitani, Hiroaki Katagiri, Masato Kawamura, Shuji Matsumoto, Toshihiro Matsumoto, Hideki Matsushita, Katsuhiko Mikawa, Takako Miura, Fusashi Miyahara, Hiromitsu Nakajima, Takuya Natsui, Yujiro Ogawa, Satoshi Ohsawa, Yuichi Okayasu , et al. (17 additional authors not shown)

Abstract: KEK electron positron injector LINAC initiated the injection operation into Photon Factory (PF) light source in 1982. Since then for 39 years, it has served for multiple projects, namely, TRISTAN, PF-AR, KEKB, and SuperKEKB. Its total operation time has accumulated 200 thousand hours on May 7, 2020. We are extremely proud of the achievement following continuous efforts by our seniors. The construc… ▽ More KEK electron positron injector LINAC initiated the injection operation into Photon Factory (PF) light source in 1982. Since then for 39 years, it has served for multiple projects, namely, TRISTAN, PF-AR, KEKB, and SuperKEKB. Its total operation time has accumulated 200 thousand hours on May 7, 2020. We are extremely proud of the achievement following continuous efforts by our seniors. The construction of the injector LINAC started in 1978, and it was commissioned for PF with 2.5 GeV electron in 1982. In parallel, the positron generator linac was constructed for the TRISTAN collider project. The slow positron facility was also commissioned in 1992. After the KEKB asymmetric-energy collider project was commissioned in 1998 with direct energy injections, the techniques such as two-bunch acceleration and simultaneous injection were developed. As the soft structure design of the LINAC was too weak against the great east Japan earthquake, it took three years to recover. Then the construction and commissioning for the SuperKEKB project went on, and the simultaneous top-up injection into four storage rings contributes to the both elementary particle physics and photon science. △ Less

Submitted 4 July, 2022; originally announced July 2022.

Comments: 6 figures, contribution to IPAC2022, Bangkok, THPOST012

Report number: KEK Preprint 2022-17

Journal ref: J. Phys. Conf. Ser. 2420, 2023, 012021

Symbol Emergence as Inter-personal Categorization with Head-to-head Latent Word

Authors: Kazuma Furukawa, Akira Taniguchi, Yoshinobu Hagiwara, Tadahiro Taniguchi

Abstract: In this study, we propose a head-to-head type (H2H-type) inter-personal multimodal Dirichlet mixture (Inter-MDM) by modifying the original Inter-MDM, which is a probabilistic generative model that represents the symbol emergence between two agents as multiagent multimodal categorization. A Metropolis--Hastings method-based naming game based on the Inter-MDM enables two agents to collaboratively pe… ▽ More In this study, we propose a head-to-head type (H2H-type) inter-personal multimodal Dirichlet mixture (Inter-MDM) by modifying the original Inter-MDM, which is a probabilistic generative model that represents the symbol emergence between two agents as multiagent multimodal categorization. A Metropolis--Hastings method-based naming game based on the Inter-MDM enables two agents to collaboratively perform multimodal categorization and share signs with a solid mathematical foundation of convergence. However, the conventional Inter-MDM presumes a tail-to-tail connection across a latent word variable, causing inflexibility of the further extension of Inter-MDM for modeling a more complex symbol emergence. Therefore, we propose herein a head-to-head type (H2H-type) Inter-MDM that treats a latent word variable as a child node of an internal variable of each agent in the same way as many prior studies of multimodal categorization. On the basis of the H2H-type Inter-MDM, we propose a naming game in the same way as the conventional Inter-MDM. The experimental results show that the H2H-type Inter-MDM yields almost the same performance as the conventional Inter-MDM from the viewpoint of multimodal categorization and sign sharing. △ Less

Submitted 24 May, 2022; originally announced May 2022.

Comments: 7 pages, 4 figures, 5 tables

Journal ref: IEEE International Conference on Development and Learning (ICDL 2022), 2022, 60-67

On the faintest solar coronal hard X-rays observed with FOXSI

Authors: Juan Camilo Buitrago-Casas, Lindsay Glesener, Steven Christe, Säm Krucker, Juliana Vievering, P. S. Athiray, Sophie Musset, Lance Davis, Sasha Courtade, Gregory Dalton, Paul Turin, Zoe Turin, Brian Ramsey, Stephen Bongiorno, Daniel Ryan, Tadayuki Takahashi, Kento Furukawa, Shin Watanabe, Noriyuki Narukage, Shin-nosuke Ishikawa, Ikuyuki Mitsuishi, Kouichi Hagino, Van Shourt, Jessie Duncan, Yixian Zhang , et al. (1 additional authors not shown)

Abstract: Solar nanoflares are small eruptive events releasing magnetic energy in the quiet corona. If nanoflares follow the same physics as their larger counterparts, they should emit hard X-rays (HXRs) but with a rather faint intensity. A copious and continuous presence of nanoflares would deliver enormous amounts of energy into the solar corona, possibly accounting for its high temperatures. To date, the… ▽ More Solar nanoflares are small eruptive events releasing magnetic energy in the quiet corona. If nanoflares follow the same physics as their larger counterparts, they should emit hard X-rays (HXRs) but with a rather faint intensity. A copious and continuous presence of nanoflares would deliver enormous amounts of energy into the solar corona, possibly accounting for its high temperatures. To date, there has not been any direct observation of such sustained and persistent HXRs from the quiescent Sun. However, Hannah et al. in 2010 constrained the quiet Sun HXR emission using almost 12 days of quiescent solar-off-pointing observations by RHESSI. These observations set upper limits at $3.4\times 10^{-2}$ photons$^{-1}$ s$^{-1}$ cm$^{-2}$ keV$^{-1}$ and $9.5\times 10^{-4}$ photons$^{-1}$ s$^{-1}$ cm$^{-2}$ keV$^{-1}$ for the 3-6 keV and 6-12 keV energy ranges, respectively. Observing feeble HXRs is challenging because it demands high sensitivity and dynamic range instruments in HXRs. The Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket experiment excels in these two attributes. Particularly, FOXSI completed its third successful flight (FOXSI-3) on September 7th, 2018. During FOXSI-3's flight, the Sun exhibited a fairly quiet configuration, displaying only one aged non-flaring active region. Using the entire $\sim$6.5 minutes of FOXSI-3 data, we constrained the quiet Sun emission in HXRs. We found $2σ$ upper limits in the order of $\sim 10^{-3}$ photons$^{-1}$ s$^{-1}$ cm$^{-2}$ keV$^{-1}$ for the 5-10 keV energy range. FOXSI-3's upper limit is consistent with what was reported by Hannah et al., 2010, but FOXSI-3 achieved this result using $\sim$1/2640 less time than RHESSI. A possible future spacecraft using FOXSI's concept would allow enough observation time to constrain the current HXR quiet Sun limits further or perhaps even make direct detections. △ Less

Submitted 9 May, 2022; originally announced May 2022.

Journal ref: A&A 665, A103 (2022)

Applying Syntax$\unicode{x2013}$Prosody Mapping Hypothesis and Prosodic Well-Formedness Constraints to Neural Sequence-to-Sequence Speech Synthesis

Authors: Kei Furukawa, Takeshi Kishiyama, Satoshi Nakamura

Abstract: End-to-end text-to-speech synthesis (TTS), which generates speech sounds directly from strings of texts or phonemes, has improved the quality of speech synthesis over the conventional TTS. However, most previous studies have been evaluated based on subjective naturalness and have not objectively examined whether they can reproduce pitch patterns of phonological phenomena such as downstep, rhythmic… ▽ More End-to-end text-to-speech synthesis (TTS), which generates speech sounds directly from strings of texts or phonemes, has improved the quality of speech synthesis over the conventional TTS. However, most previous studies have been evaluated based on subjective naturalness and have not objectively examined whether they can reproduce pitch patterns of phonological phenomena such as downstep, rhythmic boost, and initial lowering that reflect syntactic structures in Japanese. These phenomena can be linguistically explained by phonological constraints and the syntax$\unicode{x2013}$prosody mapping hypothesis (SPMH), which assumes projections from syntactic structures to phonological hierarchy. Although some experiments in psycholinguistics have verified the validity of the SPMH, it is crucial to investigate whether it can be implemented in TTS. To synthesize linguistic phenomena involving syntactic or phonological constraints, we propose a model using phonological symbols based on the SPMH and prosodic well-formedness constraints. Experimental results showed that the proposed method synthesized similar pitch patterns to those reported in linguistics experiments for the phenomena of initial lowering and rhythmic boost. The proposed model efficiently synthesizes phonological phenomena in the test data that were not explicitly included in the training data. △ Less

Submitted 29 March, 2022; originally announced March 2022.

Comments: Submitted to INTERSPEECH 2022

The International Linear Collider: Report to Snowmass 2021

Authors: Alexander Aryshev, Ties Behnke, Mikael Berggren, James Brau, Nathaniel Craig, Ayres Freitas, Frank Gaede, Spencer Gessner, Stefania Gori, Christophe Grojean, Sven Heinemeyer, Daniel Jeans, Katja Kruger, Benno List, Jenny List, Zhen Liu, Shinichiro Michizono, David W. Miller, Ian Moult, Hitoshi Murayama, Tatsuya Nakada, Emilio Nanni, Mihoko Nojiri, Hasan Padamsee, Maxim Perelstein , et al. (487 additional authors not shown)

Abstract: The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu… ▽ More The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community. △ Less

Submitted 16 January, 2023; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: 356 pages, Large pdf file (40 MB) submitted to Snowmass 2021; v2 references to Snowmass contributions added, additional authors; v3 references added, some updates, additional authors

Report number: DESY-22-045, IFT--UAM/CSIC--22-028, KEK Preprint 2021-61, PNNL-SA-160884, SLAC-PUB-17662

Tracking accuracy evaluation of electromagnetic sensor-based colonoscope tracking method

Authors: Masahiro Oda, Hiroaki Kondo, Takayuki Kitasaka, Kazuhiro Furukawa, Ryoji Miyahara, Yoshiki Hirooka, Hidemi Goto, Nassir Navab, Kensaku Mori

Abstract: This paper reports a detailed evaluation results of a colonoscope tracking method. A colonoscope tracking method utilizing electromagnetic sensors and a CT volume has been proposed. Tracking accuracy of this method was evaluated by using a colon phantom. In the previously proposed paper, tracking errors were measured only at six points on the colon phantom for the accuracy evaluation. The point nu… ▽ More This paper reports a detailed evaluation results of a colonoscope tracking method. A colonoscope tracking method utilizing electromagnetic sensors and a CT volume has been proposed. Tracking accuracy of this method was evaluated by using a colon phantom. In the previously proposed paper, tracking errors were measured only at six points on the colon phantom for the accuracy evaluation. The point number is not enough to evaluate relationships between the tracking errors and positions in the colon. In this paper, we evaluated the colonoscope tracking method based on more detailed measurement results of the tracking errors. We measured tracking errors at 52 points on the colon phantom and visualized magnitudes of the tracking errors. From our experiments, tracking errors in the ascending and descending colons were enough small to perform colonoscope navigations. However, tracking errors in the transverse and descending colons were large due to colon deformations. △ Less

Submitted 14 January, 2022; originally announced January 2022.

Comments: Accepted paper as an oral presentation at the Second International Workshop on Computer-Assisted and Robotic Endoscopy (CARE) 2015, Held in Conjunction with MICCAI 2015

Journal ref: Computer-Assisted and Robotic Endoscopy, LNCS 9515, pp.101-108, 2015

Semi-automated Virtual Unfolded View Generation Method of Stomach from CT Volumes

Authors: Masahiro Oda, Tomoaki Suito, Yuichiro Hayashi, Takayuki Kitasaka, Kazuhiro Furukawa, Ryoji Miyahara, Yoshiki Hirooka, Hidemi Goto, Gen Iinuma, Kazunari Misawa, Shigeru Nawano, Kensaku Mori

Abstract: CT image-based diagnosis of the stomach is developed as a new way of diagnostic method. A virtual unfolded (VU) view is suitable for displaying its wall. In this paper, we propose a semi-automated method for generating VU views of the stomach. Our method requires minimum manual operations. The determination of the unfolding forces and the termination of the unfolding process are automated. The unf… ▽ More CT image-based diagnosis of the stomach is developed as a new way of diagnostic method. A virtual unfolded (VU) view is suitable for displaying its wall. In this paper, we propose a semi-automated method for generating VU views of the stomach. Our method requires minimum manual operations. The determination of the unfolding forces and the termination of the unfolding process are automated. The unfolded shape of the stomach is estimated based on its radius. The unfolding forces are determined so that the stomach wall is deformed to the expected shape. The iterative deformation process is terminated if the difference of the shapes between the deformed shape and expected shape is small. Our experiments using 67 CT volumes showed that our proposed method can generate good VU views for 76.1% cases. △ Less

Submitted 14 January, 2022; originally announced January 2022.

Comments: Accepted paper as a poster presentation at MICCAI 2013 (International Conference on Medical Image Computing and Computer-Assisted Intervention), Nagoya, Japan

Journal ref: Published in Proceedings of MICCAI 2013, LNCS 8149, pp.332-339, 2013

On the singular loci of higher secant varieties of Veronese embeddings

Authors: Katsuhisa Furukawa, Kangjin Han

Abstract: In this paper we study singular loci of higher secant varieties of the image of the $d$-uple Veronese embedding of projective $n$-space, $v_d(\mathbb{P}^n) \subset \mathbb{P}^{N={n+d\choose d}-1}$. We call the closure of the union of all the $(k-1)$-planes spanned by $k$ points on $X$ the `$k$-th secant of $X$' for a given embedded variety $X \subset\mathbb{P}^N$ and denote it by $σ_k(X)$. For t… ▽ More In this paper we study singular loci of higher secant varieties of the image of the $d$-uple Veronese embedding of projective $n$-space, $v_d(\mathbb{P}^n) \subset \mathbb{P}^{N={n+d\choose d}-1}$. We call the closure of the union of all the $(k-1)$-planes spanned by $k$ points on $X$ the `$k$-th secant of $X$' for a given embedded variety $X \subset\mathbb{P}^N$ and denote it by $σ_k(X)$. For the singular loci of $σ_k(v_d(\mathbb{P}^n))$, it has been known only for $k\le3$. As investigating geometry of moving tangents along subvarieties, we determine the (non-)singularity of so-called the `$m$-subsecant locus' of $σ_k(v_d(\mathbb{P}^n))$, consisting of $σ_k(v_d(\mathbb{P}^m))$ with any $m$-plane $\mathbb{P}^m \subset \mathbb{P}^n$. These loci with arbitrary $k,d,m,n$ show an interesting trichotomy between generic smoothness, non-trivial singularity and trivial singularity. In many cases, they can be served as a new source for the singular locus of the $k$-th secant other than a trivial one, the $(k-1)$-th secant variety. We also consider the case of the $4$-th secant of $v_d(\mathbb{P}^n)$ by applying main results and computing conormal space via a certain type of Young flattening. In the end, some generalization and discussions for further development are presented as well. △ Less

Submitted 28 April, 2024; v1 submitted 5 November, 2021; originally announced November 2021.

Comments: 35 pages; a major revision on Sect 2 (e.g. replacing an erroneous lemma based on affine geometry (lemma 13 in ver.1) by new dimension estimations using projective geometry techniques) & updating proof accordingly (Sect 4.2); finding the other exceptional case for the 'trichotomy' behavior (see Remark 4 (e)); presenting a generalization (Theorem 33) and a refined question (Question 35)

MSC Class: 14N05; 14M12; 14J60; 15A21; 15A69

Multiagent Multimodal Categorization for Symbol Emergence: Emergent Communication via Interpersonal Cross-modal Inference

Authors: Yoshinobu Hagiwara, Kazuma Furukawa, Akira Taniguchi, Tadahiro Taniguchi

Abstract: This paper describes a computational model of multiagent multimodal categorization that realizes emergent communication. We clarify whether the computational model can reproduce the following functions in a symbol emergence system, comprising two agents with different sensory modalities playing a naming game. (1) Function for forming a shared lexical system that comprises perceptual categories and… ▽ More This paper describes a computational model of multiagent multimodal categorization that realizes emergent communication. We clarify whether the computational model can reproduce the following functions in a symbol emergence system, comprising two agents with different sensory modalities playing a naming game. (1) Function for forming a shared lexical system that comprises perceptual categories and corresponding signs, formed by agents through individual learning and semiotic communication between agents. (2) Function to improve the categorization accuracy in an agent via semiotic communication with another agent, even when some sensory modalities of each agent are missing. (3) Function that an agent infers unobserved sensory information based on a sign sampled from another agent in the same manner as cross-modal inference. We propose an interpersonal multimodal Dirichlet mixture (Inter-MDM), which is derived by dividing an integrative probabilistic generative model, which is obtained by integrating two Dirichlet mixtures (DMs). The Markov chain Monte Carlo algorithm realizes emergent communication. The experimental results demonstrated that Inter-MDM enables agents to form multimodal categories and appropriately share signs between agents. It is shown that emergent communication improves categorization accuracy, even when some sensory modalities are missing. Inter-MDM enables an agent to predict unobserved information based on a shared sign. △ Less

Submitted 15 September, 2021; originally announced September 2021.

Comments: 27 pages, 5 figures, 12 tables

Justification of the Hydrostatic Approximation of the Primitive Equations in Anisotropic Space $L^\infty_H L^q_{x_3}(\Torus^3)$

Authors: Ken Furukawa, Takahito Kashiwabara

Abstract: The primitive equations are fundamental models in geophysical fluid dynamics and derived from the scaled Navier-Stokes equations. In the primitive equations, the evolution equation to the vertical velocity is replaced by the so-called hydrostatic approximation. In this paper, we give a justification of the hydrostatic approximation by the scaled Navier-Stoke equations in anisotropic spaces… ▽ More The primitive equations are fundamental models in geophysical fluid dynamics and derived from the scaled Navier-Stokes equations. In the primitive equations, the evolution equation to the vertical velocity is replaced by the so-called hydrostatic approximation. In this paper, we give a justification of the hydrostatic approximation by the scaled Navier-Stoke equations in anisotropic spaces $L^\infty_H L^q_{x_3} (\Torus^3)$ for $q \geq 1$. △ Less

Submitted 7 September, 2021; originally announced September 2021.

Analysis and Stabilization of AC Line Synchronized Timing System for SuperKEKB

Authors: Di Wang, Kazuro Furukawa, Masanori Satoh, Hiroshi Kaji, Hitoshi Sugimura, Yoshinori Enomoto, Fusashi Miyahara

Abstract: A timing system provides high-precision signals to allow the controls over a variety of hardware and software components in the accelerator complex. This is guaranteed by the radio frequency (RF) and trigger signal synchronization for subsystems such as klystrons, pulsed magnets, and beam monitors. The main trigger signal should be distributed throughout the facility and repeated at the beam repet… ▽ More A timing system provides high-precision signals to allow the controls over a variety of hardware and software components in the accelerator complex. This is guaranteed by the radio frequency (RF) and trigger signal synchronization for subsystems such as klystrons, pulsed magnets, and beam monitors. The main trigger signal should be distributed throughout the facility and repeated at the beam repetition rate. This trigger signal is usually generated by the same phase of an AC power line to follow the source of the fluctuation of an electrical grid and reduce the unwanted variation of the beam quality. To fulfill the needs of the multi-accelerator facility at KEK, apart from the normal trigger synchronization and bucket selection injection control, a beam operation scheme called the pulse-to-pulse modulation is utilized; hence, the complexity of the timing system increases. Uncertainty in the system and a trigger signal delivery error caused by a drastic AC power line drift are observed. Further, the effort to establish a reliable timing system at KEK and several solutions to improve the system robustness are presented. △ Less

Submitted 26 July, 2021; v1 submitted 19 May, 2021; originally announced May 2021.

Imaging and Spectral Performance of a 60 μm Pitch CdTe Double-Sided Strip Detector

Authors: Kento Furukawa, Shunsaku Nagasawa, Lindsay Glesener, Miho Katsuragawa, Shin'ichiro Takeda, Shin Watanabe, Tadayuki Takahashi

Abstract: We have evaluated the performance of a fine pitch CdTe Double-sided Strip Detector (CdTe-DSD), which was originally developed for the focal plane detector of a hard X-ray telescope to observe the Sun. The detector has a thickness of 750 um and has 128 strip electrodes with a 60 um strip pitch orthogonally placed on both sides of the detector and covers an energy range 4 keV to 80 keV. The study of… ▽ More We have evaluated the performance of a fine pitch CdTe Double-sided Strip Detector (CdTe-DSD), which was originally developed for the focal plane detector of a hard X-ray telescope to observe the Sun. The detector has a thickness of 750 um and has 128 strip electrodes with a 60 um strip pitch orthogonally placed on both sides of the detector and covers an energy range 4 keV to 80 keV. The study of the depth of photon interaction and charge sharing effects are of importance in order to provide good spectroscopic and imaging performance. We study the tail structure observed in the spectra caused by charge trapping and develop a new method to reconstruct the spectra based on induced charge information from both anode and cathode strips. By applying this method, energy resolutions (FWHM) of 0.76 keV and 1.0 keV can be obtained at photon energies of 14 keV and 60 keV, respectively, if the energy difference between the anode and cathode is within 1 keV. Furthermore, the tail component at 60 keV is reduced, and the energy resolution of the 60 keV peak is improved from 2.4 keV to 1.5 keV (FWHM) if the energy difference is greater than 1 keV. In order to study the imaging performance, we constructed a simple imaging system using a 5 mm thick tungsten plate that has a pinhole with a diameter of 100 um. We utilize a Ba-133 radioisotope of 1 mm in diameter as a target source in combination with a 100 um slit made from 0.5 mm thickness tungsten. We imaged the Ba-133 source behind the 100 um slit using a 30 keV peak, with a 100 um pinhole placed at the center of the source-detector distance. By applying a charge sharing correction between strips, we have succeeded in obtaining a position resolution better than the strip pitch of 60 um. △ Less

Submitted 10 June, 2020; originally announced June 2020.

Comments: 7 pages, 13 figures, accepted for publication in Nuclear Inst. and Methods in Physics Research, A

Journal ref: Nuclear Inst. and Methods in Physics Research, A 978 (2020) 164378

The Hydrostatic Approximation for the Primitive Equations by the Scaled Navier-Stokes Equations under the No-Slip Boundary Condition

Authors: Ken Furukawa, Yoshikazu Giga, Takahito Kashiwabara

Abstract: In this paper we justify the hydrostatic approximation of the primitive equations in the maximal $L^p$-$L^q$-setting in the three-dimensional layer domain $Ω= \Torus^2 \times (-1, 1)$ under the no-slip (Dirichlet) boundary condition in any time interval $(0, T)$ for $T>0$. We show that the solution to the scaled Navier-Stokes equations with Besov initial data $u_0 \in B^{s}_{q,p}(Ω)$ for… ▽ More In this paper we justify the hydrostatic approximation of the primitive equations in the maximal $L^p$-$L^q$-setting in the three-dimensional layer domain $Ω= \Torus^2 \times (-1, 1)$ under the no-slip (Dirichlet) boundary condition in any time interval $(0, T)$ for $T>0$. We show that the solution to the scaled Navier-Stokes equations with Besov initial data $u_0 \in B^{s}_{q,p}(Ω)$ for $s > 2 - 2/p + 1/ q$ converges to the solution to the primitive equations with the same initial data in $\mathbb{E}_1 (T) = W^{1, p}(0, T ; L^q (Ω)) \cap L^p(0, T ; W^{2, q} (Ω)) $ with order $O(ε)$ where $(p,q) \in (1,\infty)^2$ satisfies $ \frac{1}{p} \leq \min \bracket{ 1 - 1/q, 3/2 - 2/q }$. The global well-posedness of the scaled Navier-Stokes equations in $\mathbb{E}_1 (T)$ is also proved for sufficiently small $ε>0$. Note that $T = \infty$ is included. △ Less

Submitted 3 June, 2020; originally announced June 2020.

Comments: 24pages

MSC Class: 5K61

Colon Shape Estimation Method for Colonoscope Tracking using Recurrent Neural Networks

Authors: Masahiro Oda, Holger R. Roth, Takayuki Kitasaka, Kazuhiro Furukawa, Ryoji Miyahara, Yoshiki Hirooka, Hidemi Goto, Nassir Navab, Kensaku Mori

Abstract: We propose an estimation method using a recurrent neural network (RNN) of the colon's shape where deformation was occurred by a colonoscope insertion. Colonoscope tracking or a navigation system that navigates physician to polyp positions is needed to reduce such complications as colon perforation. Previous tracking methods caused large tracking errors at the transverse and sigmoid colons because… ▽ More We propose an estimation method using a recurrent neural network (RNN) of the colon's shape where deformation was occurred by a colonoscope insertion. Colonoscope tracking or a navigation system that navigates physician to polyp positions is needed to reduce such complications as colon perforation. Previous tracking methods caused large tracking errors at the transverse and sigmoid colons because these areas largely deform during colonoscope insertion. Colon deformation should be taken into account in tracking processes. We propose a colon deformation estimation method using RNN and obtain the colonoscope shape from electromagnetic sensors during its insertion into the colon. This method obtains positional, directional, and an insertion length from the colonoscope shape. From its shape, we also calculate the relative features that represent the positional and directional relationships between two points on a colonoscope. Long short-term memory is used to estimate the current colon shape from the past transition of the features of the colonoscope shape. We performed colon shape estimation in a phantom study and correctly estimated the colon shapes during colonoscope insertion with 12.39 (mm) estimation error. △ Less

Submitted 20 April, 2020; originally announced April 2020.

Comments: Accepted paper as a poster presentation at MICCAI 2018 (International Conference on Medical Image Computing and Computer-Assisted Intervention), Granada, Spain

Journal ref: Published in Proceedings of MICCAI 2018, LNCS 11073, pp 176-184

Colonoscope tracking method based on shape estimation network

Authors: Masahiro Oda, Holger R. Roth, Takayuki Kitasaka, Kazuhiro Furukawa, Ryoji Miyahara, Yoshiki Hirooka, Nassir Navab, Kensaku Mori

Abstract: This paper presents a colonoscope tracking method utilizing a colon shape estimation method. CT colonography is used as a less-invasive colon diagnosis method. If colonic polyps or early-stage cancers are found, they are removed in a colonoscopic examination. In the colonoscopic examination, understanding where the colonoscope running in the colon is difficult. A colonoscope navigation system is n… ▽ More This paper presents a colonoscope tracking method utilizing a colon shape estimation method. CT colonography is used as a less-invasive colon diagnosis method. If colonic polyps or early-stage cancers are found, they are removed in a colonoscopic examination. In the colonoscopic examination, understanding where the colonoscope running in the colon is difficult. A colonoscope navigation system is necessary to reduce overlooking of polyps. We propose a colonoscope tracking method for navigation systems. Previous colonoscope tracking methods caused large tracking errors because they do not consider deformations of the colon during colonoscope insertions. We utilize the shape estimation network (SEN), which estimates deformed colon shape during colonoscope insertions. The SEN is a neural network containing long short-term memory (LSTM) layer. To perform colon shape estimation suitable to the real clinical situation, we trained the SEN using data obtained during colonoscope operations of physicians. The proposed tracking method performs mapping of the colonoscope tip position to a position in the colon using estimation results of the SEN. We evaluated the proposed method in a phantom study. We confirmed that tracking errors of the proposed method was enough small to perform navigation in the ascending, transverse, and descending colons. △ Less

Submitted 20 April, 2020; originally announced April 2020.

Comments: Accepted paper as an oral presentation at SPIE Medical Imaging 2019, San Diego, CA, USA

Journal ref: Proceedings of SPIE Medical Imaging 2019: Image-Guided Procedures, Robotic Interventions, and Modeling, Vol.10951, 109510Q

Maximal $L_p$-$L_q$ regularity for the Quasi-Steady Elliptic Problems

Authors: Ken Furukawa, Naoto Kajiwara

Abstract: In this paper we consider maximal regularity for the vector-valued quasi-steady linear elliptic problems. The equations are the elliptic equation in the domain and the evolution equations on its boundary. We prove the maximal $L_p$-$L_q$ regularity for these problems and give examples that our results are applicable. The Lopatinskii--Shapiro and the asymptotic Lopatinskii--Shapiro conditions are i… ▽ More In this paper we consider maximal regularity for the vector-valued quasi-steady linear elliptic problems. The equations are the elliptic equation in the domain and the evolution equations on its boundary. We prove the maximal $L_p$-$L_q$ regularity for these problems and give examples that our results are applicable. The Lopatinskii--Shapiro and the asymptotic Lopatinskii--Shapiro conditions are important to get boundedness of solution operators. △ Less

Submitted 18 March, 2020; originally announced March 2020.

Comments: 16 pages

The Compact Linear Collider (CLIC) - 2018 Summary Report

Authors: The CLIC, CLICdp collaborations, :, T. K. Charles, P. J. Giansiracusa, T. G. Lucas, R. P. Rassool, M. Volpi, C. Balazs, K. Afanaciev, V. Makarenko, A. Patapenka, I. Zhuk, C. Collette, M. J. Boland, A. C. Abusleme Hoffman, M. A. Diaz, F. Garay, Y. Chi, X. He, G. Pei, S. Pei, G. Shu, X. Wang, J. Zhang , et al. (671 additional authors not shown)

Abstract: The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the… ▽ More The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years. △ Less

Submitted 6 May, 2019; v1 submitted 14 December, 2018; originally announced December 2018.

Comments: 112 pages, 59 figures; published as CERN Yellow Report Monograph Vol. 2/2018; corresponding editors: Philip N. Burrows, Nuria Catalan Lasheras, Lucie Linssen, Marko Petrič, Aidan Robson, Daniel Schulte, Eva Sicking, Steinar Stapnes

Report number: CERN-2018-005-M

SuperKEKB Collider

Authors: Kazunori Akai, Kazuro Furukawa, Haruyo Koiso

Abstract: SuperKEKB, a 7 GeV electron - 4 GeV positron double-ring collider, is constructed by upgrading KEKB in order to seek new physics beyond the Standard Model. The design luminosity of SuperKEKB is 8 x 10^35 /cm^2 /s - 40 times higher than that achieved by KEKB. The greater part of the gain comes from significantly decreasing the beam sizes at the interaction point based on the nanobeam collision sche… ▽ More SuperKEKB, a 7 GeV electron - 4 GeV positron double-ring collider, is constructed by upgrading KEKB in order to seek new physics beyond the Standard Model. The design luminosity of SuperKEKB is 8 x 10^35 /cm^2 /s - 40 times higher than that achieved by KEKB. The greater part of the gain comes from significantly decreasing the beam sizes at the interaction point based on the nanobeam collision scheme; the design beam currents in both rings are double those achieved in KEKB. Large-scale construction to upgrade both the collider rings and the injector was conducted, and beam commissioning without the Belle II detector and final-focus magnets was successfully carried out from February to June in 2016. Subsequently, renovation of the interaction region, including the installation of the final-focus magnets and Belle II, and construction in the final stage of a new positron damping ring were conducted. Having completed the interaction region, beam collision tuning is scheduled from March till July in 2018. This paper reviews the design, construction, and beam commissioning of SuperKEKB. △ Less

Submitted 10 September, 2018; v1 submitted 6 September, 2018; originally announced September 2018.

Comments: Accepted by Nuclear Instruments and Method in Physics Research A (NIM A), latex(hyperref), one column, 21 pages, 17 figures, 3 tables. Fig.5 and Table.1 were updated

Report number: KEK Preprint 2018-28

Journal ref: Nucl. Instrum. Meth. A 907, 2018, pp.188-199

Rigorous justification of the hydrostatic approximation for the primitive equations by scaled Navier-Stokes equations

Authors: Ken Furukawa, Yoshikazu Giga, Matthias Hieber, Amru Hussein, Takahito Kashiwabara, Marc Wrona

Abstract: Consider the anisotropic Navier-Stokes equations as well as the primitive equations. It is shown that the horizontal velocity of the solution to the anisotropic Navier-Stokes equations in a cylindrical domain of height $\varepsilon $ with initial data $u_0=(v_0,w_0)\in B^{2-2/p}_{q,p}$, $1/q+1/p\le 1$ if $q\ge 2$ and $4/3q+2/3p\le 1$ if $q\le 2$, converges as $\varepsilon \to 0$ with convergence r… ▽ More Consider the anisotropic Navier-Stokes equations as well as the primitive equations. It is shown that the horizontal velocity of the solution to the anisotropic Navier-Stokes equations in a cylindrical domain of height $\varepsilon $ with initial data $u_0=(v_0,w_0)\in B^{2-2/p}_{q,p}$, $1/q+1/p\le 1$ if $q\ge 2$ and $4/3q+2/3p\le 1$ if $q\le 2$, converges as $\varepsilon \to 0$ with convergence rate $\mathcal{O} (\varepsilon )$ to the horizontal velocity of the solution to the primitive equations with initial data $v_0$ with respect to the maximal-$L^p$-$L^q$-regularity norm. Since the difference of the corresponding vertical velocities remains bounded with respect to that norm, the convergence result yields a rigorous justification of the hydrostatic approximation in the primitive equations in this setting. It generalizes in particular a result by Li and Titi for the $L^2$-$L^2$-setting. The approach presented here does not rely on second order energy estimates but on maximal $L^p$-$L^q$-estimates for the heat equation. △ Less

Submitted 7 August, 2018; originally announced August 2018.

Comments: 10 pages

MSC Class: Primary: 35Q35; Secondary: 47D06; 86A05

Journal ref: Nonlinearity, 33(12): 6502, 2020

Cubic hypersurfaces with positive dual defects

Authors: Katsuhisa Furukawa

Abstract: We show that if a cubic hypersurface with positive dual defect over the complex number field is not a cone, then either the hypersurface coincides with the secant variety of the singular locus, or the hypersurface contains a linear subvariety of dimension greater than the dual defect such that the intersection of the singular locus and a general contact locus is contained in the linear subvariety. We show that if a cubic hypersurface with positive dual defect over the complex number field is not a cone, then either the hypersurface coincides with the secant variety of the singular locus, or the hypersurface contains a linear subvariety of dimension greater than the dual defect such that the intersection of the singular locus and a general contact locus is contained in the linear subvariety. △ Less

Submitted 17 October, 2018; v1 submitted 9 June, 2018; originally announced June 2018.

Comments: 20 pages; v3: revised the statement of the main result and proofs

MSC Class: 14N05; 14M17

Machine learning-based colon deformation estimation method for colonoscope tracking

Authors: Masahiro Oda, Takayuki Kitasaka, Kazuhiro Furukawa, Ryoji Miyahara, Yoshiki Hirooka, Hidemi Goto, Nassir Navab, Kensaku Mori

Abstract: This paper presents a colon deformation estimation method, which can be used to estimate colon deformations during colonoscope insertions. Colonoscope tracking or navigation system that navigates a physician to polyp positions during a colonoscope insertion is required to reduce complications such as colon perforation. A previous colonoscope tracking method obtains a colonoscope position in the co… ▽ More This paper presents a colon deformation estimation method, which can be used to estimate colon deformations during colonoscope insertions. Colonoscope tracking or navigation system that navigates a physician to polyp positions during a colonoscope insertion is required to reduce complications such as colon perforation. A previous colonoscope tracking method obtains a colonoscope position in the colon by registering a colonoscope shape and a colon shape. The colonoscope shape is obtained using an electromagnetic sensor, and the colon shape is obtained from a CT volume. However, large tracking errors were observed due to colon deformations occurred during colonoscope insertions. Such deformations make the registration difficult. Because the colon deformation is caused by a colonoscope, there is a strong relationship between the colon deformation and the colonoscope shape. An estimation method of colon deformations occur during colonoscope insertions is necessary to reduce tracking errors. We propose a colon deformation estimation method. This method is used to estimate a deformed colon shape from a colonoscope shape. We use the regression forests algorithm to estimate a deformed colon shape. The regression forests algorithm is trained using pairs of colon and colonoscope shapes, which contains deformations occur during colonoscope insertions. As a preliminary study, we utilized the method to estimate deformations of a colon phantom. In our experiments, the proposed method correctly estimated deformed colon phantom shapes. △ Less

Submitted 8 June, 2018; originally announced June 2018.

Comments: Accepted paper for oral presentation at SPIE Medical Imaging 2018, Houston, TX, USA

Report number: Published in Proceedings of SPIE 10576, Medical Imaging 2018: Image-Guided Procedures, Robotic Interventions, and Modeling, 1057619

Journal ref: SPIE Medical Imaging 2018: Image-Guided Procedures, Robotic Interventions, and Modeling

Crystalline C60 fulleride with metal inside

Authors: Ayano Nakagawa, Makiko Nishino, Hiroyuki Niwa, Katsuma Ishino, Zhiyong Wang, Haruka Omachi, Ko Furukawa, Takahisa Yamaguchi, Tatsuhisa Kato, Shunji Bandow, Jeremy Rio, Chris Ewels, Shinobu Aoyagi, Hisanori Shinohara

Abstract: Endohedral metallofullerenes have been extensively studied, since the first experimental observation of La@C60 in a laser-vaporized supersonic beam in 1985. However, all of these studies have been carried out on metallofullerenes larger than C60 such as (metal)@C82, and there are no reported purified C60-based metallofullerenes except for [Li@C60]+(SbCl6)- salt. Pure (metal)@C60 has not been obtai… ▽ More Endohedral metallofullerenes have been extensively studied, since the first experimental observation of La@C60 in a laser-vaporized supersonic beam in 1985. However, all of these studies have been carried out on metallofullerenes larger than C60 such as (metal)@C82, and there are no reported purified C60-based metallofullerenes except for [Li@C60]+(SbCl6)- salt. Pure (metal)@C60 has not been obtained because of their extremely high chemical reactivity. We report here the first isolation, structural determination and electromagnetic properties of crystalline C60-based metallofullerenes, Gd@C60(CF3)5 and La@C60(CF3)5. Synchrotron X-ray single-crystal diffraction reveals that La and Gd atoms are indeed encapsulated in the Ih-C60 fullerene. The HOMO-LUMO gaps of Gd@C60 and La@C60 are significantly widened by an order of magnitude with addition of CF3- groups. Magnetic measurements show the presense of a weak antiferromagnetic coupling in Gd@C60(CF3)3 crystals at low temperatures. Gd@C60 and La@C60 might exhibit superconductivity as the electronic structures resemble those of superconducting alkali-doped C60 fullerides. △ Less

Submitted 30 January, 2018; originally announced January 2018.

Comments: 15 pages, 4 figures

Dimension of the space of conics on Fano hypersurfaces

Authors: Katsuhisa Furukawa

Abstract: R. Beheshti showed that, for a smooth Fano hypersurface $X$ of degree $\leq 8$ over the complex number field $\mathbb{C}$, the dimension of the space of lines lying in $X$ is equal to the expected dimension. We study the space of conics on $X$. In this case, if $X$ contains some linear subvariety, then the dimension of the space can be larger than the expected dimension. In this paper, we show tha… ▽ More R. Beheshti showed that, for a smooth Fano hypersurface $X$ of degree $\leq 8$ over the complex number field $\mathbb{C}$, the dimension of the space of lines lying in $X$ is equal to the expected dimension. We study the space of conics on $X$. In this case, if $X$ contains some linear subvariety, then the dimension of the space can be larger than the expected dimension. In this paper, we show that, for a smooth Fano hypersurface $X$ of degree $\leq 6$ over $\mathbb{C}$, and for an irreducible component $R$ of the space of conics lying in $X$, if the $2$-plane spanned by a general conic of $R$ is not contained in $X$, then the dimension of $R$ is equal to the expected dimension. △ Less

Submitted 10 December, 2017; v1 submitted 28 February, 2017; originally announced February 2017.

Comments: 15 pages; v2: revised and simplified proofs

MSC Class: 14C05; 14J70; 14N05

On separable higher Gauss maps

Authors: Katsuhisa Furukawa, Atsushi Ito

Abstract: We study the $m$-th Gauss map in the sense of F.~L.~Zak of a projective variety $X \subset \mathbb{P}^N$ over an algebraically closed field in any characteristic. For all integer $m$ with $n:=\dim(X) \leq m < N$, we show that the contact locus on $X$ of a general tangent $m$-plane is a linear variety if the $m$-th Gauss map is separable. We also show that for smooth $X$ with $n < N-2$, the… ▽ More We study the $m$-th Gauss map in the sense of F.~L.~Zak of a projective variety $X \subset \mathbb{P}^N$ over an algebraically closed field in any characteristic. For all integer $m$ with $n:=\dim(X) \leq m < N$, we show that the contact locus on $X$ of a general tangent $m$-plane is a linear variety if the $m$-th Gauss map is separable. We also show that for smooth $X$ with $n < N-2$, the $(n+1)$-th Gauss map is birational if it is separable, unless $X$ is the Segre embedding $\mathbb{P}^1 \times \mathbb{P}^n \subset \mathbb{P}^{2n-1}$. This is related to L. Ein's classification of varieties with small dual varieties in characteristic zero. △ Less

Submitted 20 February, 2017; originally announced February 2017.

Comments: 20 pages

MSC Class: 14N05

A combinatorial description of dual defects of toric varieties

Authors: Katsuhisa Furukawa, Atsushi Ito

Abstract: From a finite set in a lattice, we can define a toric variety embedded in a projective space. In this paper, we give a combinatorial description of the dual defect of the toric variety using the structure of the finite set as a Cayley sum with suitable conditions. We also interpret the description geometrically. From a finite set in a lattice, we can define a toric variety embedded in a projective space. In this paper, we give a combinatorial description of the dual defect of the toric variety using the structure of the finite set as a Cayley sum with suitable conditions. We also interpret the description geometrically. △ Less

Submitted 11 December, 2019; v1 submitted 18 May, 2016; originally announced May 2016.

Comments: 26 pages, Exposition has been improved due to referee comment

On Gauss maps in positive characteristic in view of images, fibers, and field extensions

Authors: Katsuhisa Furukawa, Atsushi Ito

Abstract: The Gauss map of a projective variety $X \subset \mathbb{P}^N$ is a rational map from $X$ to a Grassmann variety. In positive characteristic, we show the following results. (1) For given projective varieties $F$ and $Y$, we construct a projective variety $X$ whose Gauss map has $F$ as its general fiber and has $Y$ as its image. More generally, we give such construction for families of varieties ov… ▽ More The Gauss map of a projective variety $X \subset \mathbb{P}^N$ is a rational map from $X$ to a Grassmann variety. In positive characteristic, we show the following results. (1) For given projective varieties $F$ and $Y$, we construct a projective variety $X$ whose Gauss map has $F$ as its general fiber and has $Y$ as its image. More generally, we give such construction for families of varieties over $Y$ instead of fixed $F$. (2) At least in the case when the characteristic is not equal to $2$, any inseparable field extension appears as the extension induced from the Gauss map of some $X$. △ Less

Submitted 31 January, 2015; v1 submitted 22 December, 2014; originally announced December 2014.

Comments: 27 pages, Corollary 5.4 added

MSC Class: 14N05

The Physics of the B Factories

Authors: A. J. Bevan, B. Golob, Th. Mannel, S. Prell, B. D. Yabsley, K. Abe, H. Aihara, F. Anulli, N. Arnaud, T. Aushev, M. Beneke, J. Beringer, F. Bianchi, I. I. Bigi, M. Bona, N. Brambilla, J. B rodzicka, P. Chang, M. J. Charles, C. H. Cheng, H. -Y. Cheng, R. Chistov, P. Colangelo, J. P. Coleman, A. Drutskoy , et al. (2009 additional authors not shown)

Abstract: This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary… ▽ More This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026. △ Less

Submitted 31 October, 2015; v1 submitted 24 June, 2014; originally announced June 2014.

Comments: 928 pages, version 3 (arXiv:1406.6311v3) corresponds to the alpha, beta, gamma version of the book, the other versions use the phi1, phi2, phi3 notation

Report number: SLAC-PUB-15968, KEK Preprint 2014-3

Journal ref: Eur. Phys. J. C74 (2014) 3026

Gauss maps of toric varieties

Authors: Katsuhisa Furukawa, Atsushi Ito

Abstract: We investigate Gauss maps of (not necessarily normal) projective toric varieties over an algebraically closed field of arbitrary characteristic. The main results are as follows: (1) The structure of the Gauss map of a toric variety is described in terms of combinatorics in any characteristic. (2) We give a developability criterion in the toric case. In particular, we show that any toric variety wh… ▽ More We investigate Gauss maps of (not necessarily normal) projective toric varieties over an algebraically closed field of arbitrary characteristic. The main results are as follows: (1) The structure of the Gauss map of a toric variety is described in terms of combinatorics in any characteristic. (2) We give a developability criterion in the toric case. In particular, we show that any toric variety whose Gauss map is degenerate must be the join of some toric varieties in characteristic zero. (3) As applications, we provide two constructions of toric varieties whose Gauss maps have some given data (e.g., fibers, images) in positive characteristic. △ Less

Submitted 4 March, 2014; originally announced March 2014.

Comments: 25 pages, 3 figures

MSC Class: 14N05; 14M25

Convex separably rationally connected complete intersections

Authors: Katsuhisa Furukawa

Abstract: We give a generalization of a result of R. Pandharipande to arbitrary characteristic: We prove that, if $X$ is a convex, separably rationally connected, smooth complete intersection in $\mathbb{P}^N$ over an algebraically closed field of arbitrary characteristic, then $X$ is rational homogeneous. We give a generalization of a result of R. Pandharipande to arbitrary characteristic: We prove that, if $X$ is a convex, separably rationally connected, smooth complete intersection in $\mathbb{P}^N$ over an algebraically closed field of arbitrary characteristic, then $X$ is rational homogeneous. △ Less

Submitted 21 July, 2014; v1 submitted 24 November, 2013; originally announced November 2013.

Comments: 14 pages

MSC Class: 14E08; 14J45; 14M17

On general fibers of Gauss maps in positive characteristic

Authors: Katsuhisa Furukawa

Abstract: A general fiber of the Gauss map of a projective variety in $\mathbb{P}^N$ coincides with a linear subvariety of $\mathbb{P}^N$ in characteristic zero. In positive characteristic, S. Fukasawa showed that a general fiber of the Gauss map can be a non-linear variety. In this paper, we show that each irreducible component of such a possibly non-linear fiber of the Gauss map is contracted to one point… ▽ More A general fiber of the Gauss map of a projective variety in $\mathbb{P}^N$ coincides with a linear subvariety of $\mathbb{P}^N$ in characteristic zero. In positive characteristic, S. Fukasawa showed that a general fiber of the Gauss map can be a non-linear variety. In this paper, we show that each irreducible component of such a possibly non-linear fiber of the Gauss map is contracted to one point by the degeneracy map, and is contained in a linear subvariety corresponding to the kernel of the differential of the Gauss map. We also show the inseparability of Gauss maps of strange varieties not being cones. △ Less

Submitted 29 June, 2015; v1 submitted 20 October, 2013; originally announced October 2013.

Comments: 8 pages

MSC Class: 14N05 (Primary); 14M15 (Secondary)

Development of an intense positron source using a crystal--amorphous hybrid target for linear colliders

Authors: Y. Uesugi, T. Akagi, R. Chehab, O. Dadoun, K. Furukawa, T. Kamitani, S. Kawada, T. Omori, T. Takahashi, K. Umemori, J. Urakawa, M. Satoh, V. Strakhovenko, T. Suwada, A. Variola

Abstract: In a conventional positron source driven by a few GeV electron beam, a high amount of heat is loaded into a positron converter target to generate intense positrons required by linear colliders, and which would eventually damage the converter target. A hybrid target, composed of a single crystal target as a radiator of intense gamma--rays, and an amorphous converter target placed downstream of the… ▽ More In a conventional positron source driven by a few GeV electron beam, a high amount of heat is loaded into a positron converter target to generate intense positrons required by linear colliders, and which would eventually damage the converter target. A hybrid target, composed of a single crystal target as a radiator of intense gamma--rays, and an amorphous converter target placed downstream of the crystal, was proposed as a scheme which could overcome the problem.This paper describes the development of an intense positron source with the hybrid target. A series of experiments on positron generation with the hybrid target has been carried out with a 8--GeV electron beam at the KEKB linac. We observed that positron yield from the hybrid target increased when the incident electron beam was aligned to the crystal axis and exceeded the one from the conventional target with the converter target of the same thickness, when its thickness is less than about 2 radiation length. The measurements in the temperature rise of the amorphous converter target was successfully carried out by use of thermocouples. These results lead to establishment to the evaluation of the hybrid target as an intense positron source. △ Less

Submitted 16 October, 2013; v1 submitted 15 October, 2013; originally announced October 2013.

Comments: 17pages, 10figures

Journal ref: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Volume 319, 15 January 2014, Pages 17-23

Cohomological characterization of hyperquadrics of odd dimensions in characteristic two

Authors: Katsuhisa Furukawa

Abstract: We consider characterizations of projective varieties in terms of their tangents. S. Mori established the characterization of projective spaces in arbitrary characteristic by ampleness of tangent bundles. J. Wahl characterized projective spaces in characteristic zero by cohomological condition of tangent bundles; in addition, he remarked that a counter-example in characteristic two is constructed… ▽ More We consider characterizations of projective varieties in terms of their tangents. S. Mori established the characterization of projective spaces in arbitrary characteristic by ampleness of tangent bundles. J. Wahl characterized projective spaces in characteristic zero by cohomological condition of tangent bundles; in addition, he remarked that a counter-example in characteristic two is constructed from odd-dimensional hyperquadrics $Q_{2n-1}$ with $n > 1$. This is caused by existence of a common point in $\mathbb{P}^{2n}$ which every embedded tangent space to the quadric contains. In general, a projective variety in $\mathbb{P}^N$ is said to be strange if its embedded tangent spaces admit such a common point in $\mathbb{P}^N$. A non-linear smooth projective curve is strange if and only if it is a conic in characteristic two (E. Lluis, P. Samuel). S. Kleiman and R. Piene showed that a non-linear smooth hypersurface in $\mathbb{P}^N$ is strange if and only if it is a quadric of odd-dimension in characteristic two. In this paper, we investigate complete intersection varieties, and prove that, a non-linear smooth complete intersection variety in $\mathbb{P}^N$ is strange if and only if it is a quadric in $\mathbb{P}^N$ of odd dimension in characteristic two; these conditions are also equivalent to non-vanishing of 0-cohomology of (-1)-twist of the tangent bundle. △ Less

Submitted 2 February, 2014; v1 submitted 5 April, 2013; originally announced April 2013.

Comments: 14 pages

MSC Class: 14F10 (Primary); 14N05 (Secondary)

Accelerator Control System at KEKB and the Linac

Authors: Kazuro Furukawa, Atsuyoshi Akiyama, Eiichi Kadokura, Miho Kurashina, Katsuhiko Mikawa, Tatsuro Nakamura, Jun-ichi Odagiri, Masanori Satoh, Tsuyoshi Suwada

Abstract: KEKB completed all of the technical milestones, and had offered important insights into the flavor structure of elementary particles, especially the CP violation. The accelerator control system at KEKB and injector linac was initiated by a combination of scripting languages at the operation layer and EPICS at the equipment layer. During the project many features were implemented to achieve extreme… ▽ More KEKB completed all of the technical milestones, and had offered important insights into the flavor structure of elementary particles, especially the CP violation. The accelerator control system at KEKB and injector linac was initiated by a combination of scripting languages at the operation layer and EPICS at the equipment layer. During the project many features were implemented to achieve extreme performance out of the machine. Especially the online linkage to the accelerator simulation played an essential role. In order to further improve the reliability and flexibility two major concepts were additionally introduced later in the project, namely the channel access everywhere and the dual-tier controls. Based on the improved control system a concept of virtual accelerators were realized that enables the single injector linac serve as three separate injectors to KEKB HER, LER and Photon Factory, respectively. Those control technologies are indispensable for the future particle accelerators. △ Less

Submitted 28 December, 2012; v1 submitted 25 November, 2012; originally announced November 2012.

Comments: LaTeX (hyperref), 4 figures, English corrected, accepted by Progress of Theoretical and Experimental Physics (PTEP)

Journal ref: Progress of Theoretical and Experimental Physics, Volume 2013, Issue 3, 1 March 2013, 03A008

Duality with expanding maps and shrinking maps, and its applications to Gauss maps

Authors: Katsuhisa Furukawa

Abstract: We study expanding maps and shrinking maps of subvarieties of Grassmann varieties in arbitrary characteristic. The shrinking map was studied independently by Landsberg and Piontkowski in order to characterize Gauss images. To develop their method, we introduce the expanding map, which is a dual notion of the shrinking map and is a generalization of the Gauss map. Then we give a characterization of… ▽ More We study expanding maps and shrinking maps of subvarieties of Grassmann varieties in arbitrary characteristic. The shrinking map was studied independently by Landsberg and Piontkowski in order to characterize Gauss images. To develop their method, we introduce the expanding map, which is a dual notion of the shrinking map and is a generalization of the Gauss map. Then we give a characterization of separable Gauss maps and their images, which yields results for the following topics: (1) Linearity of general fibers of separable Gauss maps; (2) Generalization of the characterization of Gauss images; (3) Duality on one-dimensional parameter spaces of linear subvarieties lying in developable varieties. △ Less

Submitted 8 April, 2013; v1 submitted 21 October, 2011; originally announced October 2011.

Comments: 28 pages, v3: added some examples, v2: the title has been changed from v1 "Linearity of general fibers of separable Gauss maps"

MSC Class: 14N05 (Primary) 14M15 (Secondary)

Journal ref: Math. Ann. (2014) 358:403--432

13C NMR study of the magnetic properties of the quasi-one-dimensional conductor, (TMTTF)2SbF6

Authors: F. Iwase, K. Sugiura, K. Furukawa, T. Nakamura

Abstract: Magnetic properties in the quasi-one-dimensional organic salt (TMTTF)2SbF6 are investigated by 13C NMR under pressures. Antiferromagnetic phase transition at ambient pressure (AFI) is confirmed. Charge-ordering is suppressed by pressure and is not observed under 8 kbar. For 5 < P < 20 kbar, a sharp spectrum and the rapid decrease of the spin-lattice relaxation rate 1/T1 were observed below about 4… ▽ More Magnetic properties in the quasi-one-dimensional organic salt (TMTTF)2SbF6 are investigated by 13C NMR under pressures. Antiferromagnetic phase transition at ambient pressure (AFI) is confirmed. Charge-ordering is suppressed by pressure and is not observed under 8 kbar. For 5 < P < 20 kbar, a sharp spectrum and the rapid decrease of the spin-lattice relaxation rate 1/T1 were observed below about 4 K, attributed to a spin-gap transition. Above 20 kbar, extremely broadened spectrum and critical increase of 1/T1 were observed. This indicates that the system enters into another antiferromagnetic phase (AFII) under pressure. The slope of the antiferromagnetic phase transition temperature T_AFII, dT_AFII/dP, is positive, while T_AFI decreases with pressure. The magnetic moment is weakly incommensurate with the lattice at 30 kbar. △ Less

Submitted 31 August, 2011; originally announced September 2011.

Comments: 8 pages, 9 figures, to appear in Phys. Rev. B

Belle II Technical Design Report

Authors: T. Abe, I. Adachi, K. Adamczyk, S. Ahn, H. Aihara, K. Akai, M. Aloi, L. Andricek, K. Aoki, Y. Arai, A. Arefiev, K. Arinstein, Y. Arita, D. M. Asner, V. Aulchenko, T. Aushev, T. Aziz, A. M. Bakich, V. Balagura, Y. Ban, E. Barberio, T. Barvich, K. Belous, T. Bergauer, V. Bhardwaj , et al. (387 additional authors not shown)

Abstract: The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been pr… ▽ More The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been proposed. A new international collaboration Belle-II, is being formed. The Technical Design Report presents physics motivation, basic methods of the accelerator upgrade, as well as key improvements of the detector. △ Less

Submitted 1 November, 2010; originally announced November 2010.

Comments: Edited by: Z. Doležal and S. Uno

Report number: KEK Report 2010-1

Pulse-to-pulse Beam Modulation and Event-based Beam Feedback System at KEKB Linac

Authors: Kazuro Furukawa, Masanori Satoh, Tsuyoshi Suwada, Tatsuro Nakamura

Abstract: Beam injections to KEKB and Photon Factory are performed with pulse-to-pulse modulation at 50 Hz. Three very different beams are switched every 20 ms in order to inject those beams into KEKB HER, LER and Photon Factory (PF) simultaneously. Human operators work on one of those three virtual accelerators, which correspond to three-fold accelerator parameters. Beam charges for PF injection and the pr… ▽ More Beam injections to KEKB and Photon Factory are performed with pulse-to-pulse modulation at 50 Hz. Three very different beams are switched every 20 ms in order to inject those beams into KEKB HER, LER and Photon Factory (PF) simultaneously. Human operators work on one of those three virtual accelerators, which correspond to three-fold accelerator parameters. Beam charges for PF injection and the primary electron for positron generation are 50-times different, and beam energies for PF and HER injection are 3-times different. Thus, the beam stabilities are sensitive to operational parameters, and if any instability in accelerator equipment occurred, beam parameter adjustments for those virtual accelerators have to be performed. In order to cure such a situation, beam energy feedback system was installed that can respond to each of virtual accelerators independently. △ Less

Submitted 13 June, 2010; originally announced June 2010.

Comments: 3 pages, 2 figures, Contributed Talk at IPAC10, Kyoto, id:TUOCMH01

Report number: KEK Preprint 2010-16

Journal ref: Proceedings of IPAC10, Kyoto, Japan (2010) pp.1271-1273

Anomalous Interaction Dependence in Magnetism of Graphene Nanoribbons with Zigzag Edges

Authors: Karin Furukawa, Hideo Yoshioka, Yoneko Mochizuki

Abstract: Properties in magnetic ordered states of graphene nanoribbons with zigzag shaped edges are investigated by applying mean-field approximation to the Hubbard model with on-site repulsion $U$. We observe that magnetic moments and critical temperature show anomalous power-law dependences as a function of $U$; the actual values of the power are determined by only the width of ribbons. Such singular b… ▽ More Properties in magnetic ordered states of graphene nanoribbons with zigzag shaped edges are investigated by applying mean-field approximation to the Hubbard model with on-site repulsion $U$. We observe that magnetic moments and critical temperature show anomalous power-law dependences as a function of $U$; the actual values of the power are determined by only the width of ribbons. Such singular behaviours are found to be due to localized nature of the electronic states close to Fermi energy. △ Less

Submitted 1 March, 2010; originally announced March 2010.

Comments: 12 pages, 7 figures. submitted to J. Phys. Soc. Jpn

Compensation of the Crossing Angle with Crab Cavities at KEKB

Authors: T. Abe, K. Akai, M. Akemoto, A. Akiyama, M. Arinaga, K. Ebihara, K. Egawa, A. Enomoto, J. Flanagan, S. Fukuda, H. Fukuma, Y. Funakoshi, K. Furukawa, T. Furuya, K. Hara, T. Higo, S. Hiramatsu, H. Hisamatsu, H. Honma, T. Honma, K. Hosoyama, T. Ieiri, N. Iida, H. Ikeda, M. Ikeda , et al. (90 additional authors not shown)

Abstract: Crab cavities have been installed in the KEKB B--Factory rings to compensate the crossing angle at the collision point and thus increase luminosity. The beam operation with crab crossing has been done since February 2007. This is the first experience with such cavities in colliders or storage rings. The crab cavities have been working without serious issues. While higher specific luminosity than… ▽ More Crab cavities have been installed in the KEKB B--Factory rings to compensate the crossing angle at the collision point and thus increase luminosity. The beam operation with crab crossing has been done since February 2007. This is the first experience with such cavities in colliders or storage rings. The crab cavities have been working without serious issues. While higher specific luminosity than the geometrical gain has been achieved, further study is necessary and under way to reach the prediction of simulation. △ Less

Submitted 21 June, 2007; originally announced June 2007.

Comments: Submitted to Particle Accelerator Conference 2007, MOZAKI01, Albuquerque

Journal ref: Conf.Proc.C070625:27,2007

Introduction of Modern Subsystems at the KEK Injector-linac

Authors: N. Kamikubota, K. Furukawa, S. Kusano, T. Obata

Abstract: As an accelerator control system survives over several years, it is often the case that new subsystems are introduced into the original control system. The control system for the KEK electron/positron injector-linac has been using Unix workstations and VME computers since 1993. During the eight-year operation, we extended the system by introducing a) Windows PCs, b) PLC controllers with a networ… ▽ More As an accelerator control system survives over several years, it is often the case that new subsystems are introduced into the original control system. The control system for the KEK electron/positron injector-linac has been using Unix workstations and VME computers since 1993. During the eight-year operation, we extended the system by introducing a) Windows PCs, b) PLC controllers with a network interface, and c) web servers based on modern information technology. Although such new subsystems are essential to improve control functionalities, they often cause communication problems with the original control system. We discuss the experienced problems, and present our solutions for them. △ Less

Submitted 13 December, 2001; originally announced December 2001.

Comments: 3 pages, 1 figure, submitted at ICALEPCS 2001, psn# WEAP025

Report number: KEK Preprint 2001-155

Journal ref: eConf C011127 (2001) WEAP025

A Control System of the Joint-Project Accelerator Complex

Authors: J. Chiba, H. Fujii, K. Furukawa, N. Kamikubota, H. Nakagawa, N. Yamamoto, H. Sakaki, H. Yoshikawa

Abstract: The current status of the control system for a new high intensity proton accelerator, the JAERI-KEK Joint Project, is presented. The Phase 1 of the Joint-Project has been approved and recently started its construction at JAERI site at Tokai. The first beam commissioning is scheduled in 2006. In parallel with it, a 60-MeV Linac is now being constructed at KEK site at Tsukuba for R&D purpose. Rece… ▽ More The current status of the control system for a new high intensity proton accelerator, the JAERI-KEK Joint Project, is presented. The Phase 1 of the Joint-Project has been approved and recently started its construction at JAERI site at Tokai. The first beam commissioning is scheduled in 2006. In parallel with it, a 60-MeV Linac is now being constructed at KEK site at Tsukuba for R&D purpose. Recently the Project has officially decided to use the Experimental Physics and Industrial Control System (EPICS). Under the EPICS environment, we are challenging to implement the Ethernet/IP network for all communication, even at the level of end-point controllers which are so far connected via a field bus. In order to realize such a system, three new controllers (PLCs, WE7000 stations and general-purpose Ethernet boards) are being developed. A prototype EPICS driver for the PLCs works fine and is used to control the ion-source at the KEK Linac. △ Less

Submitted 28 November, 2001; originally announced November 2001.

Comments: 3 pages, no figure, ICALEPCS01

Journal ref: eConf C011127 (2001) TUAP002

Implementation of the Epics Device Support for Network-Based Controllers

Authors: K. Furukawa, J. Chiba, N. Kamikubota, H. Nakagawa

Abstract: In the control system of the JAERI-KEK joint project (High Intensity Proton Accelerator Facility), it is planned to employ network-based controllers such as PLC's and measurement stations instead of using other field control networks, since the network hardware and software can be standardized and they have been successfully utilized in other accelerator control systems in KEK. EPICS software… ▽ More In the control system of the JAERI-KEK joint project (High Intensity Proton Accelerator Facility), it is planned to employ network-based controllers such as PLC's and measurement stations instead of using other field control networks, since the network hardware and software can be standardized and they have been successfully utilized in other accelerator control systems in KEK. EPICS software support for those controllers was designed paying special attention to robustness and has been implemented and applied for the accelerator test stand. Basic functionalities were confirmed and miscellaneous functions such as diagnosis of the software itself would be added. Since many kinds of network-based equipment such as oscilloscopes have become available recently, they are considered to be integrated as well. They may enable more manageable controllers. △ Less

Submitted 7 February, 2002; v1 submitted 26 November, 2001; originally announced November 2001.

Comments: LaTeX, 3 pages, 2 figures, ICALEPCS2001, TUAP066, http://www-linac.kek.jp/linac-paper/

Journal ref: eConf C011127 (2001) TUAP066

Beam Feedback Systems and BPM Read-out System for the Two-Bunch Acceleration at Kekb Linac

Authors: K. Furukawa, N. Kamikubota, T. Suwada, T. Obata

Abstract: In order to double the positron injection rate into the KEKB ring, a two-bunch acceleration scheme has been studied at the linac, in which bunches separated by 96 ns are accelerated in 50 Hz. In this scheme the stabilization of energy and orbit of each bunch is indispensable. Thus the beam energy and orbit feedback systems have been upgraded. Since beam characteristics are acquired through bea… ▽ More In order to double the positron injection rate into the KEKB ring, a two-bunch acceleration scheme has been studied at the linac, in which bunches separated by 96 ns are accelerated in 50 Hz. In this scheme the stabilization of energy and orbit of each bunch is indispensable. Thus the beam energy and orbit feedback systems have been upgraded. Since beam characteristics are acquired through beam position monitors (BPM), their read-out system was improved to meet two-bunch requirements. Combined waveforms from BPM's were adjusted with delay cables avoiding overlaps and they enabled simultaneous measurement of beam positions of two bunches. The beam energies of two bunches were balanced by tuning rf pulse timings, and the average energy was stabilized by adjusting the accelerating rf phases. The average beam orbits were also stabilized. Slow feedback systems at the injector section for charge and bunching stabilities are being planned as well. These systems were used successfully in the test beams and will be employed in the routine operation. △ Less

Submitted 7 February, 2002; v1 submitted 26 November, 2001; originally announced November 2001.

Comments: LaTeX, 3 pages, 4 figures, ICALEPCS2001, WECT006, http://www-linac.kek.jp/linac-paper/

Journal ref: eConf C011127:WECT006,2001

Beam Switching and Beam Feedback Systems at KEKB Linac

Authors: K. Furukawa, A. Enomoto, N. Kamikubota, T. Kamitani, T. Matsumoto, Y. Ogawa, S. Ohsawa, K. Oide, T. Suwada

Abstract: The KEK 8-GeV electron / 3.5-GeV positron linac has been operated with very different beam specifications for downstream rings, KEKB, PF and PF-AR. For the reliable operation among these beam modes intelligent beam switching and beam feedback systems have been developed and used since its commissioning. A software panel is used to choose one of four beam modes and a switching sequence is execut… ▽ More The KEK 8-GeV electron / 3.5-GeV positron linac has been operated with very different beam specifications for downstream rings, KEKB, PF and PF-AR. For the reliable operation among these beam modes intelligent beam switching and beam feedback systems have been developed and used since its commissioning. A software panel is used to choose one of four beam modes and a switching sequence is executed in about two minutes. Most items in a sequence are simple operations followed by failure recoveries. The magnet standardization part consumes most of the time. The sequence can be re-arranged easily by accelerator operators. Linac beam modes are switched about fifty times a day using this software. In order to stabilize linac beam energy and orbits, as well as some accelerator equipment, about thirty software beam feedback loops have been installed. They have been utilized routinely in all beam modes, and have improved its beam quality. Since its software interfaces are standardized, it is easy to add new feedback loops simply defining monitors and actuators. △ Less

Submitted 11 September, 2000; v1 submitted 18 August, 2000; originally announced August 2000.

Comments: 3 pages, 3 figures, LaTeX, LINAC2000, TUE10, english correction

Report number: KEK Preprint 2000-102

Journal ref: eConf C000821 (2000) TUE10