-
Characterization of 4H-SiC Low Gain Avalanche Detectors (LGADs)
Authors:
Tao Yang,
Ben Sekely,
Yashas Satapathy,
Greg Allion,
Philip Barletta,
Carl Haber,
Steve Holland,
John F. Muth,
Spyridon Pavlidis,
Stefania Stucci
Abstract:
4H-SiC low gain avalanche detectors (LGADs) have been fabricated and characterized. The devices employ a circular mesa design with low-resistivity contacts and an SiO$_2$ passivation layer. The I-V and C-V characteristics of the 4H-SiC LGADs are compared with complementary 4H-SiC PiN diodes to confirm a high breakdown voltage and low leakage current. Both LGADs and PiN diodes were irradiated with…
▽ More
4H-SiC low gain avalanche detectors (LGADs) have been fabricated and characterized. The devices employ a circular mesa design with low-resistivity contacts and an SiO$_2$ passivation layer. The I-V and C-V characteristics of the 4H-SiC LGADs are compared with complementary 4H-SiC PiN diodes to confirm a high breakdown voltage and low leakage current. Both LGADs and PiN diodes were irradiated with $α$ particles from a $^{210}_{84}\rm{Po}$ source. The charge collected by each device was compared, and it was observed that low-gain charge carrier multiplication is achieved in the 4H-SiC LGAD.
△ Less
Submitted 22 August, 2024;
originally announced August 2024.
-
Studying single-electron traps in newly fabricated Skipper-CCDs for the Oscura experiment using the pocket-pumping technique
Authors:
S. E. Perez,
B. A. Cervantes-Vergara,
J. Estrada,
S. Holland,
D. Rodrigues,
J. Tiffenberg
Abstract:
Understanding and characterizing very low-energy ($\sim$eV) background sources is a must in rare-event searches. Oscura, an experiment aiming to probe electron recoils from sub-GeV dark matter using a 10-kg skipper-CCD detector, has recently fabricated its first two batches of sensors. In this work, we present the characterization of defects/contaminants identified in the buried-channel region of…
▽ More
Understanding and characterizing very low-energy ($\sim$eV) background sources is a must in rare-event searches. Oscura, an experiment aiming to probe electron recoils from sub-GeV dark matter using a 10-kg skipper-CCD detector, has recently fabricated its first two batches of sensors. In this work, we present the characterization of defects/contaminants identified in the buried-channel region of these newly fabricated skipper-CCDs. These defects/contaminants produce deferred charge from trap emission in the images next to particle tracks, which can be spatially resolved due to the sub-electron resolution achieved with these sensors. Using the trap-pumping technique, we measured the energy and cross section associated to these traps in three Oscura prototype sensors from different fabrication batches which underwent different gettering methods during fabrication. Results suggest that the type of defects/contaminants is more closely linked to the fabrication batch rather than to the gettering method used. The exposure-dependent single-electron rate (SER) of one of these sensors was measured $\sim$100~m underground, yielding $(1.8\pm 0.3)\times10^{-3}~e^-$/pix/day at 131K. The impact of the identified traps on the measured exposure-dependent SER is evaluated via a Monte Carlo simulation. Results suggest that the exposure-dependent SER of Oscura prototype sensors would be lower in lower background environments as expected.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
Astronomical Spectroscopy with Skipper CCDs: First Results from a Skipper CCD Focal Plane Prototype at SIFS
Authors:
Edgar Marrufo Villalpando,
Alex Drlica-Wagner,
Brandon Roach,
Marco Bonati,
Abhishek Bakshi,
Julia Campa,
Gustavo Cancelo,
Braulio Cancino,
Claudio R. Chavez,
Fernando Chierchie,
Juan Estrada,
Guillermo Fernandez Moroni,
Luciano Fraga,
Manuel E. Gaido,
Stephen E. Holland,
Rachel Hur,
Michelle Jonas,
Peter Moore,
Eduardo Paolini,
Andrés A. Plazas Malagón,
Leandro Stefanazzi,
Javier Tiffenberg,
Ken Treptou,
Sho Uemura,
Neal Wilcer
Abstract:
We present the first on-sky results from an ultra-low-readout-noise Skipper CCD focal plane prototype for the SOAR Integral Field Spectrograph (SIFS). The Skipper CCD focal plane consists of four 6k x 1k, 15 $μ$m pixel, fully-depleted, p-channel devices that have been thinned to ~250 $μ$m, backside processed, and treated with an anti-reflective coating. These Skipper CCDs were configured for astro…
▽ More
We present the first on-sky results from an ultra-low-readout-noise Skipper CCD focal plane prototype for the SOAR Integral Field Spectrograph (SIFS). The Skipper CCD focal plane consists of four 6k x 1k, 15 $μ$m pixel, fully-depleted, p-channel devices that have been thinned to ~250 $μ$m, backside processed, and treated with an anti-reflective coating. These Skipper CCDs were configured for astronomical spectroscopy, i.e., single-sample readout noise < 4.3 e- rms/pixel, the ability to achieve multi-sample readout noise $\ll$ 1 e- rms/pixel, full-well capacities ~40,000-65,000 e-, low dark current and charge transfer inefficiency (~2 x 10$^{-4}$ e-/pixel/s and 3.44 x 10$^{-7}$, respectively), and an absolute quantum efficiency of $\gtrsim$ 80% between 450 nm and 980 nm ($\gtrsim$ 90% between 600 nm and 900 nm). We optimized the readout sequence timing to achieve sub-electron noise (~0.5 e- rms/pixel) in a region of 2k x 4k pixels and photon-counting noise (~0.22 e- rms/pixel) in a region of 220 x 4k pixels, each with a readout time of $\lesssim$ 17 min. We observed two quasars (HB89 1159+123 and QSO J1621-0042) at redshift z ~ 3.5, two high-redshift galaxy clusters (CL J1001+0220 and SPT-CL J2040-4451), an emission line galaxy at z = 0.3239, a candidate member star of the Boötes II ultra-faint dwarf galaxy, and five CALSPEC spectrophotometric standard stars (HD074000, HD60753, HD106252, HD101452, HD200654). We present charge-quantized, photon-counting observations of the quasar HB89 1159+123 and show the detector sensitivity increase for faint spectral features. We demonstrate signal-to-noise performance improvements for SIFS observations in the low-background, readout-noise-dominated regime. We outline scientific studies that will leverage the SIFS-Skipper CCD data and new detector architectures that utilize the Skipper floating gate amplifier with faster readout times.
△ Less
Submitted 15 June, 2024;
originally announced June 2024.
-
Multi-Amplifier Sensing Charge-coupled Devices for Next Generation Spectroscopy
Authors:
Kenneth W. Lin,
Armin Karcher,
Julien Guy,
Stephen E. Holland,
William F. Kolbe,
Peter E. Nugent,
Alex Drlica-Wagner,
Ana M. Botti,
Javier Tiffenberg
Abstract:
We present characterization results and performance of a prototype Multiple-Amplifier Sensing (MAS) silicon charge-coupled device (CCD) sensor with 16 channels potentially suitable for faint object astronomical spectroscopy and low-signal, photon-limited imaging. The MAS CCD is designed to reach sub-electron readout noise by repeatedly measuring charge through a line of amplifiers during the seria…
▽ More
We present characterization results and performance of a prototype Multiple-Amplifier Sensing (MAS) silicon charge-coupled device (CCD) sensor with 16 channels potentially suitable for faint object astronomical spectroscopy and low-signal, photon-limited imaging. The MAS CCD is designed to reach sub-electron readout noise by repeatedly measuring charge through a line of amplifiers during the serial transfer shifts. Using synchronized readout electronics based on the DESI CCD controller, we report a read noise of 1.03 e$^-$ rms/pix at a speed of 26 $μ$s/pix with a single-sample readout scheme where charge in a pixel is measured only once for each output stage. At these operating parameters, we find the amplifier-to-amplifier charge transfer efficiency (ACTE) to be $>0.9995$ at low counts for all amplifiers but one for which the ACTE is 0.997. This charge transfer efficiency falls above 50,000 electrons for the read-noise optimized voltage configuration we chose for the serial clocks and gates. The amplifier linearity across a broad dynamic range from $\sim$300 to 35,000 e$^-$ was also measured to be $\pm 2.5\%$. We describe key operating parameters to optimize on these characteristics and describe the specific applications for which the MAS CCD may be a suitable detector candidate.
△ Less
Submitted 30 August, 2024; v1 submitted 10 June, 2024;
originally announced June 2024.
-
A Sixteen Multiple-Amplifier-Sensing CCD and Characterization Techniques Targeting The Next Generation of Astronomical Instruments
Authors:
Agustin J. Lapi,
Blas J. Irigoyen Gimenez,
Miqueas E. Gamero,
Claudio R. Chavez Blanco,
Fernando Chierchie,
Guillermo Fernandez Moroni,
Stephen E. Holland,
Juan Estrada,
Javier Tiffenberg
Abstract:
This work presents a candidate sensor for future spectroscopic applications, such as a Stage-5 Spectroscopic Survey Experiment or the Habitable Worlds Observatory. This new type of CCD sensor features multiple in-line amplifiers at its output stage allowing multiple measurements of the same charge packet, either in each amplifier and/or in the different amplifiers. Recently, the operation of an 8-…
▽ More
This work presents a candidate sensor for future spectroscopic applications, such as a Stage-5 Spectroscopic Survey Experiment or the Habitable Worlds Observatory. This new type of CCD sensor features multiple in-line amplifiers at its output stage allowing multiple measurements of the same charge packet, either in each amplifier and/or in the different amplifiers. Recently, the operation of an 8-amplifier sensor has been experimentally demonstrated, and the operation of a 16-amplifier sensor is presented in this work. This new sensor enables a noise level of approximately $1^e_{\rm rms}$ with a single sample per amplifier. Additionally, it is shown that sub-electron noise can be achieved using multiple samples per amplifier. In addition to demonstrating the performance of the 16-amplifier sensor, this work aims to create a framework for future analysis and performance optimization of this type of detectors. New models and techniques are presented to characterize specific parameters, which are absent in conventional CCDs and Skipper-CCDs: charge transfer between amplifiers and independent and common noise in the amplifiers, and their processing.
△ Less
Submitted 29 May, 2024;
originally announced May 2024.
-
SENSEI: First Direct-Detection Results on sub-GeV Dark Matter from SENSEI at SNOLAB
Authors:
SENSEI Collaboration,
Prakruth Adari,
Itay M. Bloch,
Ana M. Botti,
Mariano Cababie,
Gustavo Cancelo,
Brenda A. Cervantes-Vergara,
Michael Crisler,
Miguel Daal,
Ansh Desai,
Alex Drlica-Wagner,
Rouven Essig,
Juan Estrada,
Erez Etzion,
Guillermo Fernandez Moroni,
Stephen E. Holland,
Yonatan Kehat,
Yaron Korn,
Ian Lawson,
Steffon Luoma,
Aviv Orly,
Santiago E. Perez,
Dario Rodrigues,
Nathan A. Saffold,
Silvia Scorza
, et al. (12 additional authors not shown)
Abstract:
We present the first results from a dark matter search using six Skipper-CCDs in the SENSEI detector operating at SNOLAB. With an exposure of 534.9 gram-days from well-performing sensors, we select events containing 2 to 10 electron-hole pairs. After aggressively masking images to remove backgrounds, we observe 55 two-electron events, 4 three-electron events, and no events containing 4 to 10 elect…
▽ More
We present the first results from a dark matter search using six Skipper-CCDs in the SENSEI detector operating at SNOLAB. With an exposure of 534.9 gram-days from well-performing sensors, we select events containing 2 to 10 electron-hole pairs. After aggressively masking images to remove backgrounds, we observe 55 two-electron events, 4 three-electron events, and no events containing 4 to 10 electrons. The two-electron events are consistent with pileup from one-electron events. Among the 4 three-electron events, 2 appear in pixels that are likely impacted by detector defects, although not strongly enough to trigger our "hot-pixel" mask. We use these data to set world-leading constraints on sub-GeV dark matter interacting with electrons and nuclei.
△ Less
Submitted 20 December, 2023;
originally announced December 2023.
-
Characterization and Optimization of Skipper CCDs for the SOAR Integral Field Spectrograph
Authors:
Edgar Marrufo Villalpando,
Alex Drlica-Wagner,
Andrés A. Plazas Malagón,
Abhishek Bakshi,
Marco Bonati,
Julia Campa,
Braulio Cancino,
Claudio R. Chavez,
Juan Estrada,
Guillermo Fernandez Moroni,
Luciano Fraga,
Manuel E. Gaido,
Stephen Holland,
Rachel Hur,
Michelle Jonas,
Peter Moore,
Javier Tiffenberg
Abstract:
We present results from the characterization and optimization of six Skipper CCDs for use in a prototype focal plane for the SOAR Integral Field Spectrograph (SIFS). We tested eight Skipper CCDs and selected six for SIFS based on performance results. The Skipper CCDs are 6k $\times$ 1k, 15 $μ$m pixels, thick, fully-depleted, $p$-channel devices that have been thinned to $\sim 250 μ$m, backside pro…
▽ More
We present results from the characterization and optimization of six Skipper CCDs for use in a prototype focal plane for the SOAR Integral Field Spectrograph (SIFS). We tested eight Skipper CCDs and selected six for SIFS based on performance results. The Skipper CCDs are 6k $\times$ 1k, 15 $μ$m pixels, thick, fully-depleted, $p$-channel devices that have been thinned to $\sim 250 μ$m, backside processed, and treated with an antireflective coating. We optimize readout time to achieve $<4.3$ e$^-$ rms/pixel in a single non-destructive readout and $0.5$ e$^-$ rms/pixel in $5 \%$ of the detector. We demonstrate single-photon counting with $N_{\rm samp}$ = 400 ($σ_{\rm 0e^-} \sim$ 0.18 e$^-$ rms/pixel) for all 24 amplifiers (four amplifiers per detector). We also perform conventional CCD characterization measurements such as cosmetic defects ($ <0.45 \%$ ``bad" pixels), dark current ($\sim 2 \times 10^{-4}$ e$^-$/pixel/sec.), charge transfer inefficiency ($3.44 \times 10^{-7}$ on average), and charge diffusion (PSF $< 7.5 μ$m). We report on characterization and optimization measurements that are only enabled by photon-counting. Such results include voltage optimization to achieve full-well capacities $\sim 40,000-63,000$ e$^-$ while maintaining photon-counting capabilities, clock induced charge optimization, non-linearity measurements at low signals (few tens of electrons). Furthermore, we perform measurements of the brighter-fatter effect and absolute quantum efficiency ($\gtrsim\, 80 \%$ between 450 nm and 980 nm; $\gtrsim\,90 \%$ between 600 nm and 900 nm) using Skipper CCDs.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Achieving Single-Electron Sensitivity at Enhanced Speed in Fully-Depleted CCDs with Double-Gate MOSFETs
Authors:
Miguel Sofo-Haro,
Kevan Donlon,
Juan Estrada,
Steve Holland,
Farah Fahim,
Chris Leitz
Abstract:
We introduce a new output amplifier for fully-depleted thick p-channel CCDs based on double-gate MOSFETs. The charge amplifier is an n-type MOSFET specifically designed and operated to couple the fully-depleted CCD with high charge-transfer efficiency. The junction coupling between the CCD and MOSFET channels has enabled high sensitivity, demonstrating sub-electron readout noise in one pixel charg…
▽ More
We introduce a new output amplifier for fully-depleted thick p-channel CCDs based on double-gate MOSFETs. The charge amplifier is an n-type MOSFET specifically designed and operated to couple the fully-depleted CCD with high charge-transfer efficiency. The junction coupling between the CCD and MOSFET channels has enabled high sensitivity, demonstrating sub-electron readout noise in one pixel charge measurement. We have also demonstrated the non-destructive readout capability of the device. Achieving single-electron and single-photon per pixel counting in the entire CCD pixel array has been made possible through the averaging of a small number of samples. We have demonstrated fully-depleted CCD readout with better performance than the floating diffusion and floating gate amplifiers available today, in both single and multisampling regimes, boasting at least six times the speed of floating gate amplifiers.
△ Less
Submitted 20 October, 2023;
originally announced October 2023.
-
Fast Single-Quantum Measurement with a Multi-Amplifier Sensing Charge-Coupled Device
Authors:
Ana M. Botti,
Brenda A. Cervantes-Vergara,
Claudio R. Chavez,
Fernando Chierchie,
Alex Drlica-Wagner,
Juan Estrada,
Guillermo Fernandez Moroni,
Stephen E. Holland,
Blas J. Irigoyen Gimenez,
Agustin J. Lapi,
Edgar Marrufo Villalpando,
Miguel Sofo Haro,
Javier Tiffenberg,
Sho Uemura
Abstract:
A novel readout architecture that uses multiple non-destructive floating-gate amplifiers to achieve sub-electron readout noise in a thick, fully-depleted silicon detector is presented. This Multi-Amplifier Sensing Charge-Coupled Device (MAS-CCD) can perform multiple independent charge measurements with each amplifier; measurements with multiple amplifiers can then be combined to further reduce the…
▽ More
A novel readout architecture that uses multiple non-destructive floating-gate amplifiers to achieve sub-electron readout noise in a thick, fully-depleted silicon detector is presented. This Multi-Amplifier Sensing Charge-Coupled Device (MAS-CCD) can perform multiple independent charge measurements with each amplifier; measurements with multiple amplifiers can then be combined to further reduce the readout noise. The readout speed of this detector scales roughly linearly with the number of amplifiers without requiring segmentation of the active area. The performance of this detector is demonstrated, emphasizing the ability to resolve individual quanta and the ability to combine measurements across amplifiers to reduce readout noise. The unprecedented low noise and fast readout of the MAS-CCD make it a unique technology for astronomical observations, quantum imaging, and low-energy interacting particles.
△ Less
Submitted 18 August, 2023;
originally announced August 2023.
-
Confirmation of the spectral excess in DAMIC at SNOLAB with skipper CCDs
Authors:
A. Aguilar-Arevalo,
I. Arnquist,
N. Avalos,
L. Barak,
D. Baxter,
X. Bertou,
I. M. Bloch,
A. M. Botti,
M. Cababie,
G. Cancelo,
N. Castelló-Mor,
B. A. Cervantes-Vergara,
A. E. Chavarria,
J. Cortabitarte-Gutiérrez,
M. Crisler,
J. Cuevas-Zepeda,
A. Dastgheibi-Fard,
C. De Dominicis,
O. Deligny,
A. Drlica-Wagner,
J. Duarte-Campderros,
J. C. D'Olivo,
R. Essig,
E. Estrada,
J. Estrada
, et al. (47 additional authors not shown)
Abstract:
We present results from a 3.25 kg-day target exposure of two silicon charge-coupled devices (CCDs), each with 24 megapixels and skipper readout, deployed in the DAMIC setup at SNOLAB. With a reduction in pixel readout noise of a factor of 10 relative to the previous detector, we investigate the excess population of low-energy events in the CCD bulk previously observed above expected backgrounds. W…
▽ More
We present results from a 3.25 kg-day target exposure of two silicon charge-coupled devices (CCDs), each with 24 megapixels and skipper readout, deployed in the DAMIC setup at SNOLAB. With a reduction in pixel readout noise of a factor of 10 relative to the previous detector, we investigate the excess population of low-energy events in the CCD bulk previously observed above expected backgrounds. We address the dominant systematic uncertainty of the previous analysis through a depth fiducialization designed to reject surface backgrounds on the CCDs. The measured bulk ionization spectrum confirms the presence of an excess population of low-energy events in the CCD target with characteristic rate of ${\sim}7$ events per kg-day and electron-equivalent energies of ${\sim}80~$eV, whose origin remains unknown.
△ Less
Submitted 26 March, 2024; v1 submitted 2 June, 2023;
originally announced June 2023.
-
SENSEI: Search for Millicharged Particles produced in the NuMI Beam
Authors:
Liron Barak,
Itay M. Bloch,
Ana M. Botti,
Mariano Cababie,
Gustavo Cancelo,
Luke Chaplinsky,
Michael Crisler,
Alex Drlica-Wagner,
Rouven Essig,
Juan Estrada,
Erez Etzion,
Guillermo Fernandez Moroni,
Roni Harnik,
Stephen E. Holland,
Yaron Korn,
Zhen Liu,
Sravan Munagavalasa,
Aviv Orly,
Santiago E. Perez,
Ryan Plestid,
Dario Rodrigues,
Nathan A. Saffold,
Silvia Scorza,
Aman Singal,
Miguel Sofo Haro
, et al. (6 additional authors not shown)
Abstract:
Millicharged particles appear in several extensions of the Standard Model, but have not yet been detected. These hypothetical particles could be produced by an intense proton beam striking a fixed target. We use data collected in 2020 by the SENSEI experiment in the MINOS cavern at the Fermi National Accelerator Laboratory to search for ultra-relativistic millicharged particles produced in collisi…
▽ More
Millicharged particles appear in several extensions of the Standard Model, but have not yet been detected. These hypothetical particles could be produced by an intense proton beam striking a fixed target. We use data collected in 2020 by the SENSEI experiment in the MINOS cavern at the Fermi National Accelerator Laboratory to search for ultra-relativistic millicharged particles produced in collisions of protons in the NuMI beam with a fixed graphite target. The absence of any ionization events with 3 to 6 electrons in the SENSEI data allow us to place world-leading constraints on millicharged particles for masses between 30 MeV to 380 MeV. This work also demonstrates the potential of utilizing low-threshold detectors to investigate new particles in beam-dump experiments, and motivates a future experiment designed specifically for this purpose.
△ Less
Submitted 24 May, 2023; v1 submitted 8 May, 2023;
originally announced May 2023.
-
Searching for millicharged particles with 1 kg of Skipper-CCDs using the NuMI beam at Fermilab
Authors:
Santiago Perez,
Dario Rodrigues,
Juan Estrada,
Roni Harnik,
Zhen Liu,
Brenda A. Cervantes-Vergara,
Juan Carlos D'Olivo,
Ryan D. Plestid,
Javier Tiffenberg,
Tien-Tien Yu,
Alexis Aguilar-Arevalo,
Fabricio Alcalde-Bessia,
Nicolas Avalos,
Oscar Baez,
Daniel Baxter,
Xavier Bertou,
Carla Bonifazi,
Ana Botti,
Gustavo Cancelo,
Nuria Castelló-Mor,
Alvaro E. Chavarria,
Claudio R. Chavez,
Fernando Chierchie,
Juan Manuel De Egea,
Cyrus Dreyer
, et al. (35 additional authors not shown)
Abstract:
Oscura is a planned light-dark matter search experiment using Skipper-CCDs with a total active mass of 10 kg. As part of the detector development, the collaboration plans to build the Oscura Integration Test (OIT), an engineering test with 10% of the total mass. Here we discuss the early science opportunities with the OIT to search for millicharged particles (mCPs) using the NuMI beam at Fermilab.…
▽ More
Oscura is a planned light-dark matter search experiment using Skipper-CCDs with a total active mass of 10 kg. As part of the detector development, the collaboration plans to build the Oscura Integration Test (OIT), an engineering test with 10% of the total mass. Here we discuss the early science opportunities with the OIT to search for millicharged particles (mCPs) using the NuMI beam at Fermilab. mCPs would be produced at low energies through photon-mediated processes from decays of scalar, pseudoscalar, and vector mesons, or direct Drell-Yan productions. Estimates show that the OIT would be a world-leading probe for mCPs in the MeV mass range.
△ Less
Submitted 2 December, 2023; v1 submitted 17 April, 2023;
originally announced April 2023.
-
Skipper-CCD Sensors for the Oscura Experiment: Requirements and Preliminary Tests
Authors:
Brenda A. Cervantes-Vergara,
Santiago Perez,
Juan Estrada,
Ana Botti,
Claudio R. Chavez,
Fernando Chierchie,
Nathan Saffold,
Alexis Aguilar-Arevalo,
Fabricio Alcalde-Bessia,
Nicolás Avalos,
Oscar Baez,
Daniel Baxter,
Xavier Bertou,
Carla Bonifazi,
Gustavo Cancelo,
Nuria Castelló-Mor,
Alvaro E. Chavarria,
Juan Manuel De Egea,
Juan Carlos D'Olivo,
Cyrus Dreyer,
Alex Drlica-Wagner,
Rouven Essig,
Ezequiel Estrada,
Erez Etzion,
Paul Grylls
, et al. (30 additional authors not shown)
Abstract:
Oscura is a proposed multi-kg skipper-CCD experiment designed for a dark matter (DM) direct detection search that will reach unprecedented sensitivity to sub-GeV DM-electron interactions with its 10 kg detector array. Oscura is planning to operate at SNOLAB with 2070 m overburden, and aims to reach a background goal of less than one event in each electron bin in the 2-10 electron ionization-signal…
▽ More
Oscura is a proposed multi-kg skipper-CCD experiment designed for a dark matter (DM) direct detection search that will reach unprecedented sensitivity to sub-GeV DM-electron interactions with its 10 kg detector array. Oscura is planning to operate at SNOLAB with 2070 m overburden, and aims to reach a background goal of less than one event in each electron bin in the 2-10 electron ionization-signal region for the full 30 kg-year exposure, with a radiation background rate of 0.01 dru. In order to achieve this goal, Oscura must address each potential source of background events, including instrumental backgrounds. In this work, we discuss the main instrumental background sources and the strategy to control them, establishing a set of constraints on the sensors' performance parameters. We present results from the tests of the first fabricated Oscura prototype sensors, evaluate their performance in the context of the established constraints and estimate the Oscura instrumental background based on these results.
△ Less
Submitted 11 April, 2024; v1 submitted 10 April, 2023;
originally announced April 2023.
-
Design of a Skipper CCD Focal Plane for the SOAR Integral Field Spectrograph
Authors:
Edgar Marrufo Villalpando,
Alex Drlica-Wagner,
Marco Bonati,
Abhishek Bakshi,
Vanessa Bawden de Paula Macanhan,
Braulio Cancino,
Gregory E. Derylo,
Juan Estrada,
Guillermo Fernandez Moroni,
Luciano Fraga,
Stephen Holland,
Michelle J. Jonas,
Agustín Lapi,
Peter Moore,
Andrés A. Plazas Malagón,
Leandro Stefanazzi,
Javier Tiffenberg
Abstract:
We present the development of a Skipper Charge-Coupled Device (CCD) focal plane prototype for the SOAR Telescope Integral Field Spectrograph (SIFS). This mosaic focal plane consists of four 6k $\times$ 1k, 15 $μ$m pixel Skipper CCDs mounted inside a vacuum dewar. We describe the process of packaging the CCDs so that they can be easily tested, transported, and installed in a mosaic focal plane. We…
▽ More
We present the development of a Skipper Charge-Coupled Device (CCD) focal plane prototype for the SOAR Telescope Integral Field Spectrograph (SIFS). This mosaic focal plane consists of four 6k $\times$ 1k, 15 $μ$m pixel Skipper CCDs mounted inside a vacuum dewar. We describe the process of packaging the CCDs so that they can be easily tested, transported, and installed in a mosaic focal plane. We characterize the performance of $\sim 650 μ$m thick, fully-depleted engineering-grade Skipper CCDs in preparation for performing similar characterization tests on science-grade Skipper CCDs which will be thinned to 250$μ$m and backside processed with an antireflective coating. We achieve a single-sample readout noise of $4.5 e^{-} rms/pix$ for the best performing amplifiers and sub-electron resolution (photon counting capabilities) with readout noise $σ\sim 0.16 e^{-} rms/pix$ from 800 measurements of the charge in each pixel. We describe the design and construction of the Skipper CCD focal plane and provide details about the synchronized readout electronics system that will be implemented to simultaneously read 16 amplifiers from the four Skipper CCDs (4-amplifiers per detector). Finally, we outline future plans for laboratory testing, installation, commissioning, and science verification of our Skipper CCD focal plane.
△ Less
Submitted 7 October, 2022;
originally announced October 2022.
-
Solid State Detectors and Tracking for Snowmass
Authors:
A. Affolder,
A. Apresyan,
S. Worm,
M. Albrow,
D. Ally,
D. Ambrose,
E. Anderssen,
N. Apadula,
P. Asenov,
W. Armstrong,
M. Artuso,
A. Barbier,
P. Barletta,
L. Bauerdick,
D. Berry,
M. Bomben,
M. Boscardin,
J. Brau,
W. Brooks,
M. Breidenbach,
J. Buckley,
V. Cairo,
R. Caputo,
L. Carpenter,
M. Centis-Vignali
, et al. (110 additional authors not shown)
Abstract:
Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the…
▽ More
Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the development of new techniques, materials and technologies in order to fully exploit their physics potential. In this article we summarize the discussions and conclusions of the 2022 Snowmass Instrumentation Frontier subgroup on Solid State and Tracking Detectors (Snowmass IF03).
△ Less
Submitted 19 October, 2022; v1 submitted 8 September, 2022;
originally announced September 2022.
-
Skipper-CCDs: current applications and future
Authors:
B. A. Cervantes-Vergara,
S. Perez,
J. C. D'Olivo,
J. Estrada,
D. J. Grimm,
S. Holland,
M. Sofo-Haro,
W. Wong
Abstract:
This work briefly discusses the potential applications of the Skipper-CCD technology in astronomy and reviews its current use in dark matter and neutrino experiments. An overview of the ongoing efforts to build multi-kilogram experiments with these sensors is given, in the context of the Oscura experiment. First results from the characterization of Oscura sensors from the first 200 mm wafer-fabric…
▽ More
This work briefly discusses the potential applications of the Skipper-CCD technology in astronomy and reviews its current use in dark matter and neutrino experiments. An overview of the ongoing efforts to build multi-kilogram experiments with these sensors is given, in the context of the Oscura experiment. First results from the characterization of Oscura sensors from the first 200 mm wafer-fabrication run with a new vendor are presented. The overall yield of the electron counting capability of these sensors is 71%. A noise of 0.087 e$^-$ RMS, with 1225 samples/pix, and a dark current of (0.031$\pm$0.013) e$^-$/pix/day at 140 K were measured.
△ Less
Submitted 10 August, 2022;
originally announced August 2022.
-
Photon counting from the vacuum ultraviolet to the short wavelength infrared using semiconductor and superconducting technologies
Authors:
Jonathan Asaadi,
Dan Baxter,
Karl K. Berggren,
Davide Braga,
Serge A. Charlebois,
Clarence Chang,
Angelo Dragone,
Alex Drlica-Wagner,
Carlos O. Escobar,
Juan Estrada,
Farah Fahim,
Michael Febbraro,
Guillermo Fernandez Moroni,
Stephen Holland,
Todd Hossbach,
Stewart Koppell,
Christopher Leitz,
Agustina Magnoni,
Benjamin A. Mazin,
Jean-François Pratte,
Bernie Rauscher,
Dario Rodrigues,
Lingjia Shen,
Miguel Sofo-Haro,
Javier Tiffenberg
, et al. (5 additional authors not shown)
Abstract:
In the last decade, several photon counting technologies have been developed opening a new window for experiments in the low photon number regime. Several ongoing and future projects in HEP benefit from these developments, which will also have a large impact outside HEP. During the next decade there is a clear technological opportunity to fully develop these sensors and produce a large impact in H…
▽ More
In the last decade, several photon counting technologies have been developed opening a new window for experiments in the low photon number regime. Several ongoing and future projects in HEP benefit from these developments, which will also have a large impact outside HEP. During the next decade there is a clear technological opportunity to fully develop these sensors and produce a large impact in HEP. In this white paper we discuss the need for photon counting technologies in future projects, and present some technological opportunities to address those needs.
△ Less
Submitted 23 March, 2022;
originally announced March 2022.
-
Fast Timing With Silicon Carbide Low Gain Avalanche Detectors
Authors:
P. Barletta,
M. Cerullo,
C. Haber,
S. E. Holland,
J. Muth,
B. Sekely
Abstract:
4H-Silicon Carbide, when considered as a material for the fabrication of Low Gain Avalanche Detectors for particle timing and position measurement, offers potential advantages over Silicon. We discuss an ongoing study of this material aimed at the fabrication and test of prototype fast timing sensors. This work is well aligned with technical directions identified in the recent Department of Energy…
▽ More
4H-Silicon Carbide, when considered as a material for the fabrication of Low Gain Avalanche Detectors for particle timing and position measurement, offers potential advantages over Silicon. We discuss an ongoing study of this material aimed at the fabrication and test of prototype fast timing sensors. This work is well aligned with technical directions identified in the recent Department of Energy study, Basic Research Needs for High Energy Physics Detector Research and Development.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
The Oscura Experiment
Authors:
Alexis Aguilar-Arevalo,
Fabricio Alcalde Bessia,
Nicolas Avalos,
Daniel Baxter,
Xavier Bertou,
Carla Bonifazi,
Ana Botti,
Mariano Cababie,
Gustavo Cancelo,
Brenda Aurea Cervantes-Vergara,
Nuria Castello-Mor,
Alvaro Chavarria,
Claudio R. Chavez,
Fernando Chierchie,
Juan Manuel De Egea,
Juan Carlos D`Olivo,
Cyrus E. Dreyer,
Alex Drlica-Wagner,
Rouven Essig,
Juan Estrada,
Ezequiel Estrada,
Erez Etzion,
Guillermo Fernandez-Moroni,
Marivi Fernandez-Serra,
Steve Holland
, et al. (19 additional authors not shown)
Abstract:
The Oscura experiment will lead the search for low-mass dark matter particles using a very large array of novel silicon Charge Coupled Devices (CCDs) with a threshold of two electrons and with a total exposure of 30 kg-yr. The R&D effort, which began in FY20, is currently entering the design phase with the goal of being ready to start construction in late 2024. Oscura will have unprecedented sensi…
▽ More
The Oscura experiment will lead the search for low-mass dark matter particles using a very large array of novel silicon Charge Coupled Devices (CCDs) with a threshold of two electrons and with a total exposure of 30 kg-yr. The R&D effort, which began in FY20, is currently entering the design phase with the goal of being ready to start construction in late 2024. Oscura will have unprecedented sensitivity to sub-GeV dark matter particles that interact with electrons, probing dark matter-electron scattering for masses down to 500 keV and dark matter being absorbed by electrons for masses down to 1 eV. The Oscura R&D effort has made some significant progress on the main technical challenges of the experiment, of which the most significant are engaging new foundries for the fabrication of the CCD sensors, developing a cold readout solution, and understanding the experimental backgrounds.
△ Less
Submitted 23 February, 2022; v1 submitted 21 February, 2022;
originally announced February 2022.
-
EXCESS workshop: Descriptions of rising low-energy spectra
Authors:
P. Adari,
A. Aguilar-Arevalo,
D. Amidei,
G. Angloher,
E. Armengaud,
C. Augier,
L. Balogh,
S. Banik,
D. Baxter,
C. Beaufort,
G. Beaulieu,
V. Belov,
Y. Ben Gal,
G. Benato,
A. Benoît,
A. Bento,
L. Bergé,
A. Bertolini,
R. Bhattacharyya,
J. Billard,
I. M. Bloch,
A. Botti,
R. Breier,
G. Bres,
J-. L. Bret
, et al. (281 additional authors not shown)
Abstract:
Many low-threshold experiments observe sharply rising event rates of yet unknown origins below a few hundred eV, and larger than expected from known backgrounds. Due to the significant impact of this excess on the dark matter or neutrino sensitivity of these experiments, a collective effort has been started to share the knowledge about the individual observations. For this, the EXCESS Workshop was…
▽ More
Many low-threshold experiments observe sharply rising event rates of yet unknown origins below a few hundred eV, and larger than expected from known backgrounds. Due to the significant impact of this excess on the dark matter or neutrino sensitivity of these experiments, a collective effort has been started to share the knowledge about the individual observations. For this, the EXCESS Workshop was initiated. In its first iteration in June 2021, ten rare event search collaborations contributed to this initiative via talks and discussions. The contributing collaborations were CONNIE, CRESST, DAMIC, EDELWEISS, MINER, NEWS-G, NUCLEUS, RICOCHET, SENSEI and SuperCDMS. They presented data about their observed energy spectra and known backgrounds together with details about the respective measurements. In this paper, we summarize the presented information and give a comprehensive overview of the similarities and differences between the distinct measurements. The provided data is furthermore publicly available on the workshop's data repository together with a plotting tool for visualization.
△ Less
Submitted 4 March, 2022; v1 submitted 10 February, 2022;
originally announced February 2022.
-
Analysis of the first Genetic Engineering Attribution Challenge
Authors:
Oliver M. Crook,
Kelsey Lane Warmbrod,
Greg Lipstein,
Christine Chung,
Christopher W. Bakerlee,
T. Greg McKelvey Jr.,
Shelly R. Holland,
Jacob L. Swett,
Kevin M. Esvelt,
Ethan C. Alley,
William J. Bradshaw
Abstract:
The ability to identify the designer of engineered biological sequences -- termed genetic engineering attribution (GEA) -- would help ensure due credit for biotechnological innovation, while holding designers accountable to the communities they affect. Here, we present the results of the first Genetic Engineering Attribution Challenge, a public data-science competition to advance GEA. Top-scoring…
▽ More
The ability to identify the designer of engineered biological sequences -- termed genetic engineering attribution (GEA) -- would help ensure due credit for biotechnological innovation, while holding designers accountable to the communities they affect. Here, we present the results of the first Genetic Engineering Attribution Challenge, a public data-science competition to advance GEA. Top-scoring teams dramatically outperformed previous models at identifying the true lab-of-origin of engineered sequences, including an increase in top-1 and top-10 accuracy of 10 percentage points. A simple ensemble of prizewinning models further increased performance. New metrics, designed to assess a model's ability to confidently exclude candidate labs, also showed major improvements, especially for the ensemble. Most winning teams adopted CNN-based machine-learning approaches; however, one team achieved very high accuracy with an extremely fast neural-network-free approach. Future work, including future competitions, should further explore a wide diversity of approaches for bringing GEA technology into practical use.
△ Less
Submitted 14 October, 2021;
originally announced October 2021.
-
On the trajectory of the nonlinear pendulum: Exact analytic solutions via power series
Authors:
W. Cade Reinberger,
Morgan S. Holland,
Nathaniel S. Barlow,
Steven J. Weinstein
Abstract:
We provide an exact infinite power series solution that describes the trajectory of a nonlinear simple pendulum undergoing librating and rotating motion for all time. Although the series coefficients were previously given in [V. Fairén, V. López, and L. Conde, Am. J. Phys 56 (1), (1988), pp. 57-61], the series itself -- as well as the optimal location about which an expansion should be chosen to a…
▽ More
We provide an exact infinite power series solution that describes the trajectory of a nonlinear simple pendulum undergoing librating and rotating motion for all time. Although the series coefficients were previously given in [V. Fairén, V. López, and L. Conde, Am. J. Phys 56 (1), (1988), pp. 57-61], the series itself -- as well as the optimal location about which an expansion should be chosen to assure series convergence and maximize the domain of convergence -- was not examined, and is provided here. By virtue of its representation as an elliptic function, the pendulum function has singularities that lie off of the real axis in the complex time plane. This, in turn, imposes a radius of convergence on the physical problem in real time. By choosing the expansion point at the top of the trajectory, the power series converges all the way to the bottom of the trajectory without being affected by these singularities. In constructing the series solution, we re-derive the coefficients using an alternative approach that generalizes to other nonlinear problems of mathematical physics. Additionally, we provide an exact resummation of the pendulum series -- Motivated by the asymptotic approximant method given in [Barlow et al., Q. J. Mech. Appl. Math., 70 (1) (2017), pp. 21-48] -- that accelerates the series' convergence uniformly from the top to the bottom of the trajectory. We also provide an accelerated exact resummation of the infinite series representation for the elliptic integral used in calculating the period of a pendulum's trajectory. This allows one to preserve analyticity in the use of the period to extend the pendulum series for all time via symmetry.
△ Less
Submitted 23 August, 2021; v1 submitted 20 August, 2021;
originally announced August 2021.
-
The Skipper CCD for low-energy threshold particle experiments above ground
Authors:
Guillermo Fernandez Moroni,
Fernando Chierchie,
Javier Tiffenberg,
Ana Botti,
Mariano Cababie,
Gustavo Cancelo,
Eliana L. Depaoli,
Juan Estrada,
Stephen E. Holland,
Dario Rodrigues,
Iván Sidelnik,
Miguel Sofo Haro,
Leandro Stefanazzi,
Sho Uemura
Abstract:
We present experimental results using a single-electron resolution Skipper-CCD running above ground level to demonstrate the potential of this technology for its use in reactor neutrino observations and other low-energy particle interaction experiments. Operating conditions and event-selection criteria are provided to decouple most of the background rate at low energies. Our final results for even…
▽ More
We present experimental results using a single-electron resolution Skipper-CCD running above ground level to demonstrate the potential of this technology for its use in reactor neutrino observations and other low-energy particle interaction experiments. Operating conditions and event-selection criteria are provided to decouple most of the background rate at low energies. Our final results for events with energies as low as $5$ ionized electron-hole pairs show that the exponentially increasing rate of events seen in other technologies is not present in our data. This demonstrates that the Skipper CCD proves to be among the best options to measure low energy and weakly interacting particles at ground level.
△ Less
Submitted 30 August, 2021; v1 submitted 30 June, 2021;
originally announced July 2021.
-
SENSEI: Characterization of Single-Electron Events Using a Skipper-CCD
Authors:
Liron Barak,
Itay M. Bloch,
Ana Botti,
Mariano Cababie,
Gustavo Cancelo,
Luke Chaplinsky,
Fernando Chierchie,
Michael Crisler,
Alex Drlica-Wagner,
Rouven Essig,
Juan Estrada,
Erez Etzion,
Guillermo Fernandez Moroni,
Daniel Gift,
Stephen E. Holland,
Sravan Munagavalasa,
Aviv Orly,
Dario Rodrigues,
Aman Singal,
Miguel Sofo Haro,
Leandro Stefanazzi,
Javier Tiffenberg,
Sho Uemura,
Tomer Volansky,
Tien-Tien Yu
Abstract:
We use a science-grade Skipper Charge Coupled Device (Skipper-CCD) operating in a low-radiation background environment to develop a semi-empirical model that characterizes the origin of single-electron events in CCDs. We identify, separate, and quantify three independent contributions to the single-electron events, which were previously bundled together and classified as "dark counts": dark curren…
▽ More
We use a science-grade Skipper Charge Coupled Device (Skipper-CCD) operating in a low-radiation background environment to develop a semi-empirical model that characterizes the origin of single-electron events in CCDs. We identify, separate, and quantify three independent contributions to the single-electron events, which were previously bundled together and classified as "dark counts": dark current, amplifier light, and spurious charge. We measure a dark current, which depends on exposure, of (5.89+-0.77)x10^-4 e-/pix/day, and an unprecedentedly low spurious charge contribution of (1.52+-0.07)x10^-4 e-/pix, which is exposure-independent. In addition, we provide a technique to study events produced by light emitted from the amplifier, which allows the detector's operation to be optimized to minimize this effect to a level below the dark-current contribution. Our accurate characterization of the single-electron events allows one to greatly extend the sensitivity of experiments searching for dark matter or coherent neutrino scattering. Moreover, an accurate understanding of the origin of single-electron events is critical to further progress in ongoing R&D efforts of Skipper and conventional CCDs.
△ Less
Submitted 26 January, 2022; v1 submitted 15 June, 2021;
originally announced June 2021.
-
Characterization of Skipper CCDs for Cosmological Applications
Authors:
Alex Drlica-Wagner,
Edgar Marrufo Villalpando,
Judah O'Neil,
Juan Estrada,
Stephen Holland,
Noah Kurinsky,
Ting S. Li,
Guillermo Fernandez Moroni,
Javier Tiffenberg,
Sho Uemura
Abstract:
We characterize the response of a novel 250 $μ$m thick, fully-depleted Skipper Charged-Coupled Device (CCD) to visible/near-infrared light with a focus on potential applications for astronomical observations. We achieve stable, single-electron resolution with readout noise $σ\sim 0.18$ e$^{-}$ rms/pix from 400 non-destructive measurements of the charge in each pixel. We verify that the gain derive…
▽ More
We characterize the response of a novel 250 $μ$m thick, fully-depleted Skipper Charged-Coupled Device (CCD) to visible/near-infrared light with a focus on potential applications for astronomical observations. We achieve stable, single-electron resolution with readout noise $σ\sim 0.18$ e$^{-}$ rms/pix from 400 non-destructive measurements of the charge in each pixel. We verify that the gain derived from photon transfer curve measurements agrees with the gain calculated from the quantized charge of individual electrons to within < 1%. We also perform relative quantum efficiency measurements and demonstrate high relative quantum efficiency at optical/near-infrared wavelengths, as is expected for a thick, fully depleted detector. Finally, we demonstrate the ability to perform multiple non-destructive measurements and achieve sub-electron readout noise over configurable subregions of the detector. This work is the first step toward demonstrating the utility of Skipper CCDs for future astronomical and cosmological applications.
△ Less
Submitted 12 March, 2021;
originally announced March 2021.
-
Analytic solution of the SEIR epidemic model via asymptotic approximant
Authors:
Steven J. Weinstein,
Morgan S. Holland,
Kelly E. Rogers,
Nathaniel S. Barlow
Abstract:
An analytic solution is obtained to the SEIR Epidemic Model. The solution is created by constructing a single second-order nonlinear differential equation in $\ln S$ and analytically continuing its divergent power series solution such that it matches the correct long-time exponential damping of the epidemic model. This is achieved through an asymptotic approximant (Barlow et. al, 2017, Q. Jl Mech.…
▽ More
An analytic solution is obtained to the SEIR Epidemic Model. The solution is created by constructing a single second-order nonlinear differential equation in $\ln S$ and analytically continuing its divergent power series solution such that it matches the correct long-time exponential damping of the epidemic model. This is achieved through an asymptotic approximant (Barlow et. al, 2017, Q. Jl Mech. Appl. Math, 70 (1), 21-48) in the form of a modified symmetric Padé approximant that incorporates this damping. The utility of the analytical form is demonstrated through its application to the COVID-19 pandemic.
△ Less
Submitted 29 June, 2020; v1 submitted 12 June, 2020;
originally announced June 2020.
-
200 mm Sensor Development Using Bonded Wafers
Authors:
M. Alyari,
R. Bradford,
M. Campanella,
P. Camporeale,
R. Demina,
J. Everts,
Z. Gecse,
R. Halenza,
U. Heintz,
S. Holland,
S. Hong,
S. Korjenevski,
A. Lampis,
R. Lipton,
R. Patti,
J. Segal,
K. W. Shin
Abstract:
Sensors fabricated from high resistivity, float zone, silicon material have been the basis of vertex detectors and trackers for the last 30 years. The areas of these devices have increased from a few square cm to $\> 200\ m^2$ for the existing CMS tracker. High Luminosity Large Hadron Collider (HL-LHC), CMS and ATLAS tracker upgrades will each require more than $200\ m^2$ of silicon and the CMS Hi…
▽ More
Sensors fabricated from high resistivity, float zone, silicon material have been the basis of vertex detectors and trackers for the last 30 years. The areas of these devices have increased from a few square cm to $\> 200\ m^2$ for the existing CMS tracker. High Luminosity Large Hadron Collider (HL-LHC), CMS and ATLAS tracker upgrades will each require more than $200\ m^2$ of silicon and the CMS High Granularity Calorimeter (HGCAL) will require more than $600\ m^2$. The cost and complexity of assembly of these devices is related to the area of each module, which in turn is set by the size of the silicon sensors. In addition to large area, the devices must be radiation hard, which requires the use of sensors thinned to 200 microns or less. The combination of wafer thinning and large wafer diameter is a significant technical challenge, and is the subject of this work. We describe work on development of thin sensors on $200 mm$ wafers using wafer bonding technology. Results of development runs with float zone, Silicon-on-Insulator and Silicon-Silicon bonded wafer technologies are reported.
△ Less
Submitted 2 September, 2020; v1 submitted 8 June, 2020;
originally announced June 2020.
-
Maintaining Capabilities in CCD Production for the Astronomy Community
Authors:
Kyle Dawson,
Stephen Holland,
David Schlegel
Abstract:
CCD detectors play a vital role in all aspects of optical astronomy. Critical to advancing research is the ability to partner with commercial foundries to produce custom devices that meet the needs of specific instruments. For more than 20 years, Teledyne DALSA Semiconductor was the primary industrial partner in the manufacturing of 150 mm wafers for CCDs. DALSA is migrating the manufacturing from…
▽ More
CCD detectors play a vital role in all aspects of optical astronomy. Critical to advancing research is the ability to partner with commercial foundries to produce custom devices that meet the needs of specific instruments. For more than 20 years, Teledyne DALSA Semiconductor was the primary industrial partner in the manufacturing of 150 mm wafers for CCDs. DALSA is migrating the manufacturing from 150mm to 200mm wafer diameter and will not be updating their CCD processing tools for the new format wafer. As a result, DALSA will no longer serve as a partner to the astronomy community in the manufacturing of CCDs. We recommend that the Department of Energy, National Science Foundation, and NASA jointly pursue a new commercial partner in CCD fabrication to maintain capabilities in custom CCD design for astronomy applications.
△ Less
Submitted 15 July, 2019;
originally announced July 2019.
-
Enhancing Operation of a Sewage Pumping Station for Inter Catchment Wastewater Transfer by Using Deep Learning and Hydraulic Model
Authors:
Duo Zhang,
Erlend Skullestad Holland,
Geir Lindholm,
Harsha Ratnaweera
Abstract:
This paper presents a novel Inter Catchment Wastewater Transfer (ICWT) method for mitigating sewer overflow. The ICWT aims at balancing the spatial mismatch of sewer flow and treatment capacity of Wastewater Treatment Plant (WWTP), through collaborative operation of sewer system facilities. Using a hydraulic model, the effectiveness of ICWT is investigated in a sewer system in Drammen, Norway. Con…
▽ More
This paper presents a novel Inter Catchment Wastewater Transfer (ICWT) method for mitigating sewer overflow. The ICWT aims at balancing the spatial mismatch of sewer flow and treatment capacity of Wastewater Treatment Plant (WWTP), through collaborative operation of sewer system facilities. Using a hydraulic model, the effectiveness of ICWT is investigated in a sewer system in Drammen, Norway. Concerning the whole system performance, we found that the Søren Lemmich pump station plays a vital role in the ICWT framework. To enhance the operation of this pump station, it is imperative to construct a multi-step ahead water level prediction model. Hence, one of the most promising artificial intelligence techniques, Long Short Term Memory (LSTM), is employed to undertake this task. Experiments demonstrated that LSTM is superior to Gated Recurrent Unit (GRU), Recurrent Neural Network (RNN), Feed-forward Neural Network (FFNN) and Support Vector Regression (SVR).
△ Less
Submitted 9 November, 2018;
originally announced November 2018.
-
The Dataset Nutrition Label: A Framework To Drive Higher Data Quality Standards
Authors:
Sarah Holland,
Ahmed Hosny,
Sarah Newman,
Joshua Joseph,
Kasia Chmielinski
Abstract:
Artificial intelligence (AI) systems built on incomplete or biased data will often exhibit problematic outcomes. Current methods of data analysis, particularly before model development, are costly and not standardized. The Dataset Nutrition Label (the Label) is a diagnostic framework that lowers the barrier to standardized data analysis by providing a distilled yet comprehensive overview of datase…
▽ More
Artificial intelligence (AI) systems built on incomplete or biased data will often exhibit problematic outcomes. Current methods of data analysis, particularly before model development, are costly and not standardized. The Dataset Nutrition Label (the Label) is a diagnostic framework that lowers the barrier to standardized data analysis by providing a distilled yet comprehensive overview of dataset "ingredients" before AI model development. Building a Label that can be applied across domains and data types requires that the framework itself be flexible and adaptable; as such, the Label is comprised of diverse qualitative and quantitative modules generated through multiple statistical and probabilistic modelling backends, but displayed in a standardized format. To demonstrate and advance this concept, we generated and published an open source prototype with seven sample modules on the ProPublica Dollars for Docs dataset. The benefits of the Label are manyfold. For data specialists, the Label will drive more robust data analysis practices, provide an efficient way to select the best dataset for their purposes, and increase the overall quality of AI models as a result of more robust training datasets and the ability to check for issues at the time of model development. For those building and publishing datasets, the Label creates an expectation of explanation, which will drive better data collection practices. We also explore the limitations of the Label, including the challenges of generalizing across diverse datasets, and the risk of using "ground truth" data as a comparison dataset. We discuss ways to move forward given the limitations identified. Lastly, we lay out future directions for the Dataset Nutrition Label project, including research and public policy agendas to further advance consideration of the concept.
△ Less
Submitted 9 May, 2018;
originally announced May 2018.
-
Red, redder, reddest: SCUBA-2 imaging of colour-selected \textit{Herschel} sources
Authors:
S. Duivenvoorden,
S. Oliver,
J. M. Scudder,
J. Greenslade,
D. A. Riechers,
S. M. Wilkins,
V. Buat,
S. C. Chapman,
D. L. Clements,
A. Cooray,
K. E. K. Coppin,
H. Dannerbauer,
G. De Zotti,
J. S. Dunlop,
S. A. Eales,
A. Efstathiou,
D. Farrah,
J. E. Geach,
W. S. Holland,
P. D. Hurley,
R. J. Ivison,
L. Marchetti,
G. Petitpas,
M. T. Sargent,
D. Scott
, et al. (6 additional authors not shown)
Abstract:
High-redshift, luminous, dusty star forming galaxies (DSFGs) constrain the extremity of galaxy formation theories. The most extreme are discovered through follow-up on candidates in large area surveys. Here we present 850 $μ$m SCUBA-2 follow-up observations of 188 red DSFG candidates from the \textit{Herschel} Multi-tiered Extragalactic Survey (HerMES) Large Mode Survey, covering 274 deg$^2$. We d…
▽ More
High-redshift, luminous, dusty star forming galaxies (DSFGs) constrain the extremity of galaxy formation theories. The most extreme are discovered through follow-up on candidates in large area surveys. Here we present 850 $μ$m SCUBA-2 follow-up observations of 188 red DSFG candidates from the \textit{Herschel} Multi-tiered Extragalactic Survey (HerMES) Large Mode Survey, covering 274 deg$^2$. We detected 87 per cent with a signal-to-noise ratio $>$ 3 at 850~$μ$m. We introduce a new method for incorporating the confusion noise in our spectral energy distribution fitting by sampling correlated flux density fluctuations from a confusion limited map. The new 850~$μ$m data provide a better constraint on the photometric redshifts of the candidates, with photometric redshift errors decreasing from $σ_z/(1+z)\approx0.21$ to $0.15$. Comparison spectroscopic redshifts also found little bias ($\langle (z-z_{\rm spec})/(1+z_{\rm spec})\rangle = 0.08 $). The mean photometric redshift is found to be 3.6 with a dispersion of $0.4$ and we identify 21 DSFGs with a high probability of lying at $z > 4$. After simulating our selection effects we find number counts are consistent with phenomenological galaxy evolution models. There is a statistically significant excess of WISE-1 and SDSS sources near our red galaxies, giving a strong indication that lensing may explain some of the apparently extreme objects. Nevertheless, our sample should include examples of galaxies with the highest star formation rates in the Universe ($\gg10^3$ M$_\odot$yr$^{-1}$).
△ Less
Submitted 22 January, 2018;
originally announced January 2018.
-
Commercialization of micro-fabrication of antenna-coupled Transition Edge Sensor bolometer detectors for studies of the Cosmic Microwave Background
Authors:
Aritoki Suzuki,
Chris Bebek,
Maurice Garcia-Sciveres,
Stephen Holland,
Akito Kusaka,
Adrian T. Lee,
Nicholas Palaio,
Natalie Roe,
Leo Steinmetz
Abstract:
We report on the development of commercially fabricated multi-chroic antenna coupled Transition Edge Sensor (TES) bolometer arrays for Cosmic Microwave Background (CMB) polarimetry experiments. CMB polarimetry experiments have deployed instruments in stages. Stage-II experiments deployed with O(1,000) detectors and reported successful detection of B-mode (divergent free) polarization pattern in th…
▽ More
We report on the development of commercially fabricated multi-chroic antenna coupled Transition Edge Sensor (TES) bolometer arrays for Cosmic Microwave Background (CMB) polarimetry experiments. CMB polarimetry experiments have deployed instruments in stages. Stage-II experiments deployed with O(1,000) detectors and reported successful detection of B-mode (divergent free) polarization pattern in the CMB. Stage-III experiments have recently started observing with O(10,000) detectors with wider frequency coverage. A concept for a Stage-IV experiment, CMB-S4, is emerging to make a definitive measurement of CMB polarization from the ground with O(400,000) detectors. The orders of magnitude increase in detector count for CMB-S4 requires a new approach in detector fabrication to increase fabrication throughput.and reduce cost. We report on collaborative efforts with two commercial micro-fabrication foundries to fabricate antenna coupled TES bolometer detectors. The detector design is based on the sinuous antenna coupled dichroic detector from the POLARBEAR-2 experiment. The TES bolometers showed the expected I-V response and the RF performance agrees with simulation. We will discuss the motivation, design consideration, fabrication processes, test results, and how industrial detector fabrication could be a path to fabricate hundreds of detector wafers for future CMB polarimetry experiments.
△ Less
Submitted 22 January, 2018;
originally announced January 2018.
-
The Herschel Bright Sources (HerBS): Sample definition and SCUBA-2 observations
Authors:
Tom J. L. C. Bakx,
S. A. Eales,
M. Negrello,
M. W. L. Smith,
E. Valiante,
W. S. Holland,
M. Baes,
N. Bourne,
D. L. Clements,
H. Dannerbauer,
G. De Zotti,
L. Dunne,
S. Dye,
C. Furlanetto,
R. J. Ivison,
S. Maddox,
L. Marchetti,
M. J. Michałowski,
A. Omont,
I. Oteo,
J. L. Wardlow,
P. van der Werf,
C. Yang
Abstract:
We present the Herschel Bright Sources (HerBS) sample, a sample of bright, high-redshift Herschel sources detected in the 616.4 square degree H-ATLAS survey. The HerBS sample contains 209 galaxies, selected with a 500 μm flux density greater than 80 mJy and an estimated redshift greater than 2. The sample consists of a combination of HyLIRGs and lensed ULIRGs during the epoch of peak cosmic star f…
▽ More
We present the Herschel Bright Sources (HerBS) sample, a sample of bright, high-redshift Herschel sources detected in the 616.4 square degree H-ATLAS survey. The HerBS sample contains 209 galaxies, selected with a 500 μm flux density greater than 80 mJy and an estimated redshift greater than 2. The sample consists of a combination of HyLIRGs and lensed ULIRGs during the epoch of peak cosmic star formation. In this paper, we present SCUBA-2 observations at 850 $μ$m of 189 galaxies of the HerBS sample, 152 of these sources were detected. We fit a spectral template to the Herschel-SPIRE and 850 $μ$m SCUBA-2 flux densities of 22 sources with spectroscopically determined redshifts, using a two-component modified blackbody spectrum as a template. We find a cold- and hot-dust temperature of 21.29 K and 45.80 K, a cold-to-hot dust mass ratio of 26.62 and a $β$ of 1.83. The poor quality of the fit suggests that the sample of galaxies is too diverse to be explained by our simple model. Comparison of our sample to a galaxy evolution model indicates that the fraction of lenses is high. Out of the 152 SCUBA-2 detected galaxies, the model predicts 128.4 $\pm$ 2.1 of those galaxies to be lensed (84.5%). The SPIRE 500 $μ$m flux suggests that out of all 209 HerBS sources, we expect 158.1 $\pm$ 1.7 lensed sources, giving a total lensing fraction of 76 per cent.
△ Less
Submitted 5 September, 2017;
originally announced September 2017.
-
Quantum efficiency modeling for a thick back-illuminated astronomical CCD
Authors:
D. E. Groom,
S. Haque,
S. E. Holland,
W. F. Kolbe
Abstract:
The quantum efficiency and reflectivity of thick, back-illuminated CCD's being fabricated at LBNL for astronomical applications are modeled and compared with experiment. The treatment differs from standard thin-film optics in that (a) absorption is permitted in any film, (b) the 200--500~$μ$m thick silicon substrate is considered as a thin film in order to observe the fringing behavior at long wav…
▽ More
The quantum efficiency and reflectivity of thick, back-illuminated CCD's being fabricated at LBNL for astronomical applications are modeled and compared with experiment. The treatment differs from standard thin-film optics in that (a) absorption is permitted in any film, (b) the 200--500~$μ$m thick silicon substrate is considered as a thin film in order to observe the fringing behavior at long wavelengths, and (c) by using approximate boundary conditions, absorption in the surface films is separated from absorption in the substrate. For the quantum efficiency measurements the CCD's are normally operated as CCD's, usually at $T = -140^\circ$C, and at higher temperatures as photodiodes. They are mounted on mechanical substrates. Reflectivity is measured on air-backed wafer samples at room temperature. The agreement between model expectation and quantum efficiency measurement is in general satisfactory.
△ Less
Submitted 9 August, 2017;
originally announced August 2017.
-
Celebrating 30 Years of Science from the James Clerk Maxwell Telescope
Authors:
Ian Robson,
Wayne S. Holland,
Per Friberg
Abstract:
The James Clerk Maxwell Telescope (JCMT) has been the world's most successful single dish telescope at submillimetre wavelengths since it began operations in 1987. From the pioneering days of single-element photometers and mixers, through the first modest imaging arrays, leading to the state-of-the-art widefield camera SCUBA-2 and the spectrometer array HARP, the JCMT has been associated with a nu…
▽ More
The James Clerk Maxwell Telescope (JCMT) has been the world's most successful single dish telescope at submillimetre wavelengths since it began operations in 1987. From the pioneering days of single-element photometers and mixers, through the first modest imaging arrays, leading to the state-of-the-art widefield camera SCUBA-2 and the spectrometer array HARP, the JCMT has been associated with a number of major scientific discoveries. Famous for the discovery of "SCUBA" galaxies, which are responsible for a large fraction of the far-infrared background, to the first images of huge discs of cool debris around nearby stars, possibly giving us clues to the evolution of planetary systems, the JCMT has pushed the sensitivity limits more than any other facility in this most difficult of wavebands in which to observe. Now approaching the 30th anniversary of the first observations the telescope continues to carry out unique and innovative science. In this review article we look back on just some of the scientific highlights from the past 30 years.
△ Less
Submitted 26 June, 2017;
originally announced June 2017.
-
SONS: The JCMT legacy survey of debris discs in the submillimetre
Authors:
Wayne S. Holland,
Brenda C. Matthews,
Grant M. Kennedy,
Jane S. Greaves,
Mark C. Wyatt,
Mark Booth,
Pierre Bastien,
Geoff Bryden,
Harold Butner,
Christine H. Chen,
Antonio Chrysostomou,
Claire L. Davies,
William R. F. Dent,
James Di Francesco,
Gaspard Duchene,
Andy G. Gibb,
Per Friberg,
Rob J. Ivison,
Tim Jenness,
JJ Kavelaars,
Samantha Lawler,
Jean-Francois Lestrade,
Jonathan P. Marshall,
Amaya Moro-Martin,
Olja Panic
, et al. (10 additional authors not shown)
Abstract:
Debris discs are evidence of the ongoing destructive collisions between planetesimals, and their presence around stars also suggests that planets exist in these systems. In this paper, we present submillimetre images of the thermal emission from debris discs that formed the SCUBA-2 Observations of Nearby Stars (SONS) survey, one of seven legacy surveys undertaken on the James Clerk Maxwell telesco…
▽ More
Debris discs are evidence of the ongoing destructive collisions between planetesimals, and their presence around stars also suggests that planets exist in these systems. In this paper, we present submillimetre images of the thermal emission from debris discs that formed the SCUBA-2 Observations of Nearby Stars (SONS) survey, one of seven legacy surveys undertaken on the James Clerk Maxwell telescope between 2012 and 2015. The overall results of the survey are presented in the form of 850 microns (and 450 microns, where possible) images and fluxes for the observed fields. Excess thermal emission, over that expected from the stellar photosphere, is detected around 49 stars out of the 100 observed fields. The discs are characterised in terms of their flux density, size (radial distribution of the dust) and derived dust properties from their spectral energy distributions. The results show discs over a range of sizes, typically 1-10 times the diameter of the Edgeworth-Kuiper Belt in our Solar System. The mass of a disc, for particles up to a few millimetres in size, is uniquely obtainable with submillimetre observations and this quantity is presented as a function of the host stars' age, showing a tentative decline in mass with age. Having doubled the number of imaged discs at submillimetre wavelengths from ground-based, single dish telescope observations, one of the key legacy products from the SONS survey is to provide a comprehensive target list to observe at high angular resolution using submillimetre/millimetre interferometers (e.g., ALMA, SMA).
△ Less
Submitted 5 June, 2017;
originally announced June 2017.
-
Single-electron and single-photon sensitivity with a silicon Skipper CCD
Authors:
Javier Tiffenberg,
Miguel Sofo-Haro,
Alex Drlica-Wagner,
Rouven Essig,
Yann Guardincerri,
Steve Holland,
Tomer Volansky,
Tien-Tien Yu
Abstract:
We have developed a non-destructive readout system that uses a floating-gate amplifier on a thick, fully depleted charge coupled device (CCD) to achieve ultra-low readout noise of 0.068 e- rms/pix. This is the first time that discrete sub-electron readout noise has been achieved reproducibly over millions of pixels on a stable, large-area detector. This allows the precise counting of the number of…
▽ More
We have developed a non-destructive readout system that uses a floating-gate amplifier on a thick, fully depleted charge coupled device (CCD) to achieve ultra-low readout noise of 0.068 e- rms/pix. This is the first time that discrete sub-electron readout noise has been achieved reproducibly over millions of pixels on a stable, large-area detector. This allows the precise counting of the number of electrons in each pixel, ranging from pixels with 0 electrons to more than 1500 electrons. The resulting CCD detector is thus an ultra-sensitive calorimeter. It is also capable of counting single photons in the optical and near-infrared regime. Implementing this innovative non-destructive readout system has a negligible impact on CCD design and fabrication, and there are nearly immediate scientific applications. As a particle detector, this CCD will have unprecedented sensitivity to low-mass dark matter particles and coherent neutrino-nucleus scattering, while astronomical applications include future direct imaging and spectroscopy of exoplanets.
△ Less
Submitted 31 May, 2017;
originally announced June 2017.
-
Detection of exocometary CO within the 440 Myr-old Fomalhaut belt: a similar CO+CO$_2$ ice abundance in exocomets and Solar System comets
Authors:
L. Matrà,
M. A. MacGregor,
P. Kalas,
M. C. Wyatt,
G. M. Kennedy,
D. J. Wilner,
G. Duchene,
A. M. Hughes,
M. Pan,
A. Shannon,
M. Clampin,
M. P. Fitzgerald,
J. R. Graham,
W. S. Holland,
O. Panić,
K. Y. L. Su
Abstract:
Recent ALMA observations present mounting evidence for the presence of exocometary gas released within Kuiper belt analogues around nearby main sequence stars. This represents a unique opportunity to study their ice reservoir at the younger ages when volatile delivery to planets is most likely to occur. We here present the detection of CO J=2-1 emission co-located with dust emission from the comet…
▽ More
Recent ALMA observations present mounting evidence for the presence of exocometary gas released within Kuiper belt analogues around nearby main sequence stars. This represents a unique opportunity to study their ice reservoir at the younger ages when volatile delivery to planets is most likely to occur. We here present the detection of CO J=2-1 emission co-located with dust emission from the cometary belt in the 440 Myr-old Fomalhaut system. Through spectro-spatial filtering, we achieve a 5.4$σ$ detection and determine that the ring's sky-projected rotation axis matches that of the star. The CO mass derived ($0.65-42 \times10^{-7}$ M$_{\oplus}$) is the lowest of any circumstellar disk detected to date, and must be of exocometary origin. Using a steady state model, we estimate the CO+CO$_2$ mass fraction of exocomets around Fomalhaut to be between 4.6-76%, consistent with Solar System comets and the two other belts known to host exocometary gas. This is the first indication of a similarity in cometary compositions across planetary systems that may be linked to their formation scenario and is consistent with direct ISM inheritance. In addition, we find tentative evidence that $(49\pm 27)$% of the detected flux originates from a region near the eccentric belt's pericentre. If confirmed, the latter may be explained through a recent impact event or CO pericentre glow due to exocometary release within a steady state collisional cascade. In the latter scenario, we show how the azimuthal dependence of the CO release rate leads to asymmetries in gas observations of eccentric exocometary belts.
△ Less
Submitted 16 May, 2017;
originally announced May 2017.
-
A Complete ALMA Map of the Fomalhaut Debris Disk
Authors:
Meredith A. MacGregor,
Luca Matra,
Paul Kalas,
David J. Wilner,
Margaret Pan,
Grant M. Kennedy,
Mark C. Wyatt,
Gaspard Duchene,
A. Meredith Hughes,
George H. Rieke,
Mark Clampin,
Michael P. Fitzgerald,
James R. Graham,
Wayne S. Holland,
Olja Panic,
Andrew Shannon,
Kate Su
Abstract:
We present ALMA mosaic observations at 1.3 mm (223 GHz) of the Fomalhaut system with a sensitivity of 14 $μ$Jy/beam. These observations provide the first millimeter map of the continuum dust emission from the complete outer debris disk with uniform sensitivity, enabling the first conclusive detection of apocenter glow. We adopt a MCMC modeling approach that accounts for the eccentric orbital param…
▽ More
We present ALMA mosaic observations at 1.3 mm (223 GHz) of the Fomalhaut system with a sensitivity of 14 $μ$Jy/beam. These observations provide the first millimeter map of the continuum dust emission from the complete outer debris disk with uniform sensitivity, enabling the first conclusive detection of apocenter glow. We adopt a MCMC modeling approach that accounts for the eccentric orbital parameters of a collection of particles within the disk. The outer belt is radially confined with an inner edge of $136.3\pm0.9$ AU and width of $13.5\pm1.8$ AU. We determine a best-fit eccentricity of $0.12\pm0.01$. Assuming a size distribution power law index of $q=3.46\pm 0.09$, we constrain the dust absorptivity power law index $β$ to be $0.9<β<1.5$. The geometry of the disk is robustly constrained with inclination $65.\!\!^\circ6\pm0.\!\!^\circ3$, position angle $337.\!\!^\circ9\pm0.\!\!^\circ3$, and argument of periastron $22.\!\!^\circ5\pm4.\!\!^\circ3$. Our observations do not confirm any of the azimuthal features found in previous imaging studies of the disk with HST, SCUBA, and ALMA. However, we cannot rule out structures $\leq10$ AU in size or which only affect smaller grains. The central star is clearly detected with a flux density of $0.75\pm0.02$ mJy, significantly lower than predicted by current photospheric models. We discuss the implications of these observations for the directly imaged Fomalhaut b and the inner dust belt detected at infrared wavelengths.
△ Less
Submitted 16 May, 2017;
originally announced May 2017.
-
New constraints on the millimetre emission of six debris disks
Authors:
Jonathan P. Marshall,
S. T. Maddison,
E. Thilliez,
B. C. Matthews,
D. J. Wilner,
J. S. Greaves,
W. S. Holland
Abstract:
The presence of dusty debris around main sequence stars denotes the existence of planetary systems. Such debris disks are often identified by the presence of excess continuum emission at infrared and (sub-)millimetre wavelengths, with measurements at longer wavelengths tracing larger and cooler dust grains. The exponent of the slope of the disk emission at sub-millimetre wavelengths, `q', defines…
▽ More
The presence of dusty debris around main sequence stars denotes the existence of planetary systems. Such debris disks are often identified by the presence of excess continuum emission at infrared and (sub-)millimetre wavelengths, with measurements at longer wavelengths tracing larger and cooler dust grains. The exponent of the slope of the disk emission at sub-millimetre wavelengths, `q', defines the size distribution of dust grains in the disk. This size distribution is a function of the rigid strength of the dust producing parent planetesimals. As part of the survey `PLAnetesimals around TYpical Pre-main seqUence Stars' (PLATYPUS) we observed six debris disks at 9-mm using the Australian Telescope Compact Array. We obtain marginal (~3-σ) detections of three targets: HD 105, HD 61005, and HD 131835. Upper limits for the three remaining disks, HD20807, HD109573, and HD109085, provide further constraint of the (sub-)millimetre slope of their spectral energy distributions. The values of q (or their limits) derived from our observations are all smaller than the oft-assumed steady state collisional cascade model (q = 3.5), but lie well within the theoretically expected range for debris disks q ~ 3 to 4. The measured q values for our targets are all < 3.3, consistent with both collisional modelling results and theoretical predictions for parent planetesimal bodies being `rubble piles' held together loosely by their self-gravity.
△ Less
Submitted 27 March, 2017;
originally announced March 2017.
-
A Statistical Framework for Improved Automatic Flaw Detection in Nondestructive Evaluation Images
Authors:
Ye Tian,
Ranjan Maitra,
William Q. Meeker,
Stephen D. Holland
Abstract:
Nondestructive evaluation (NDE) techniques are widely used to detect flaws in critical components of systems like aircraft engines, nuclear power plants and oil pipelines in order to prevent catastrophic events. Many modern NDE systems generate image data. In some applications an experienced inspector performs the tedious task of visually examining every image to provide accurate conclusions about…
▽ More
Nondestructive evaluation (NDE) techniques are widely used to detect flaws in critical components of systems like aircraft engines, nuclear power plants and oil pipelines in order to prevent catastrophic events. Many modern NDE systems generate image data. In some applications an experienced inspector performs the tedious task of visually examining every image to provide accurate conclusions about the existence of flaws. This approach is labor-intensive and can cause misses due to operator ennui. Automated evaluation methods seek to eliminate human-factors variability and improve throughput. Simple methods based on peak amplitude in an image are sometimes employed and a trained-operator-controlled refinement that uses a dynamic threshold based on signal-to-noise ratio (SNR) has also been implemented. We develop an automated and optimized detection procedure that mimics these operations. The primary goal of our methodology is to reduce the number of images requiring expert visual evaluation by filtering out images that are overwhelmingly definitive on the existence or absence of a flaw. We use an appropriate model for the observed values of the SNR-detection criterion to estimate the probability of detection. Our methodology outperforms current methods in terms of its ability to detect flaws.
△ Less
Submitted 31 January, 2017;
originally announced February 2017.
-
The space density of luminous dusty star-forming galaxies at $z>4$: SCUBA-2 and LABOCA imaging of ultrared galaxies from $Herschel$-ATLAS
Authors:
R. J. Ivison,
A. J. R. Lewis,
A. Weiss,
V. Arumugam,
J. M. Simpson,
W. S. Holland,
S. Maddox,
L. Dunne,
E. Valiante,
P. van der Werf,
A. Omont,
H. Dannerbauer,
Ian Smail,
F. Bertoldi,
M. Bremer,
R. S. Bussmann,
Z. -Y. Cai,
D. L. Clements,
A. Cooray,
G. De Zotti,
S. A. Eales,
C. Fuller,
J. Gonzalez-Nuevo,
E. Ibar,
M. Negrello
, et al. (6 additional authors not shown)
Abstract:
Until recently, only a handful of dusty, star-forming galaxies (DSFGs) were known at $z>4$, most of them significantly amplified by gravitational lensing. Here, we have increased the number of such DSFGs substantially, selecting galaxies from the uniquely wide 250-, 350- and 500-$μ$m Herschel-ATLAS imaging survey on the basis of their extremely red far-infrared colors and faint 350- and 500-$μ$m f…
▽ More
Until recently, only a handful of dusty, star-forming galaxies (DSFGs) were known at $z>4$, most of them significantly amplified by gravitational lensing. Here, we have increased the number of such DSFGs substantially, selecting galaxies from the uniquely wide 250-, 350- and 500-$μ$m Herschel-ATLAS imaging survey on the basis of their extremely red far-infrared colors and faint 350- and 500-$μ$m flux densities - ergo they are expected to be largely unlensed, luminous, rare and very distant. The addition of ground-based continuum photometry at longer wavelengths from the JCMT and APEX allows us to identify the dust peak in their SEDs, better constraining their redshifts. We select the SED templates best able to determine photometric redshifts using a sample of 69 high-redshift, lensed DSFGs, then perform checks to assess the impact of the CMB on our technique, and to quantify the systematic uncertainty associated with our photometric redshifts, $σ=0.14\,(1+z)$, using a sample of 25 galaxies with spectroscopic redshifts, each consistent with our color selection. For Herschel-selected ultrared galaxies with typical colors of $S_{500}/S_{250}\sim 2.2$ and $S_{500}/S_{350}\sim 1.3$ and flux densities, $S_{500}\sim 50\,$mJy, we determine a median redshift, $\hat{z}_{\rm phot}=3.66$, an interquartile redshift range, 3.30$-$4.27, with a median rest-frame 8$-$1000-$μ$m luminosity, $\hat{L}_{\rm IR}$, of $1.3\times 10^{13}\,$L$_\odot$. A third lie at $z>4$, suggesting a space density, $ρ_{z>4}$, of $\approx 6 \times 10^{-7}\,$Mpc$^{-3}$. Our sample contains the most luminous known star-forming galaxies, and the most over-dense cluster of starbursting proto-ellipticals yet found.
△ Less
Submitted 2 November, 2016;
originally announced November 2016.
-
The DESI Experiment Part II: Instrument Design
Authors:
DESI Collaboration,
Amir Aghamousa,
Jessica Aguilar,
Steve Ahlen,
Shadab Alam,
Lori E. Allen,
Carlos Allende Prieto,
James Annis,
Stephen Bailey,
Christophe Balland,
Otger Ballester,
Charles Baltay,
Lucas Beaufore,
Chris Bebek,
Timothy C. Beers,
Eric F. Bell,
José Luis Bernal,
Robert Besuner,
Florian Beutler,
Chris Blake,
Hannes Bleuler,
Michael Blomqvist,
Robert Blum,
Adam S. Bolton,
Cesar Briceno
, et al. (268 additional authors not shown)
Abstract:
DESI (Dark Energy Spectropic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. The DESI instrument is a robotically-actuated, fiber-fed spectrograph capable of taking up to 5,000 simultaneous spectra over a wavelength range from…
▽ More
DESI (Dark Energy Spectropic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. The DESI instrument is a robotically-actuated, fiber-fed spectrograph capable of taking up to 5,000 simultaneous spectra over a wavelength range from 360 nm to 980 nm. The fibers feed ten three-arm spectrographs with resolution $R= λ/Δλ$ between 2000 and 5500, depending on wavelength. The DESI instrument will be used to conduct a five-year survey designed to cover 14,000 deg$^2$. This powerful instrument will be installed at prime focus on the 4-m Mayall telescope in Kitt Peak, Arizona, along with a new optical corrector, which will provide a three-degree diameter field of view. The DESI collaboration will also deliver a spectroscopic pipeline and data management system to reduce and archive all data for eventual public use.
△ Less
Submitted 13 December, 2016; v1 submitted 31 October, 2016;
originally announced November 2016.
-
The DESI Experiment Part I: Science,Targeting, and Survey Design
Authors:
DESI Collaboration,
Amir Aghamousa,
Jessica Aguilar,
Steve Ahlen,
Shadab Alam,
Lori E. Allen,
Carlos Allende Prieto,
James Annis,
Stephen Bailey,
Christophe Balland,
Otger Ballester,
Charles Baltay,
Lucas Beaufore,
Chris Bebek,
Timothy C. Beers,
Eric F. Bell,
José Luis Bernal,
Robert Besuner,
Florian Beutler,
Chris Blake,
Hannes Bleuler,
Michael Blomqvist,
Robert Blum,
Adam S. Bolton,
Cesar Briceno
, et al. (268 additional authors not shown)
Abstract:
DESI (Dark Energy Spectroscopic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations (BAO) and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. To trace the underlying dark matter distribution, spectroscopic targets will be selected in four classes from imaging data. We will measure…
▽ More
DESI (Dark Energy Spectroscopic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations (BAO) and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. To trace the underlying dark matter distribution, spectroscopic targets will be selected in four classes from imaging data. We will measure luminous red galaxies up to $z=1.0$. To probe the Universe out to even higher redshift, DESI will target bright [O II] emission line galaxies up to $z=1.7$. Quasars will be targeted both as direct tracers of the underlying dark matter distribution and, at higher redshifts ($ 2.1 < z < 3.5$), for the Ly-$α$ forest absorption features in their spectra, which will be used to trace the distribution of neutral hydrogen. When moonlight prevents efficient observations of the faint targets of the baseline survey, DESI will conduct a magnitude-limited Bright Galaxy Survey comprising approximately 10 million galaxies with a median $z\approx 0.2$. In total, more than 30 million galaxy and quasar redshifts will be obtained to measure the BAO feature and determine the matter power spectrum, including redshift space distortions.
△ Less
Submitted 13 December, 2016; v1 submitted 31 October, 2016;
originally announced November 2016.
-
The canonical semantic network supports residual language function in chronic post-stroke aphasia
Authors:
Joseph C. Griffis,
Rodolphe Nenert,
Jane B. Allendorfer,
Jennifer Vannest,
Scott Holland,
Aimee Dietz,
Jerzy P. Szaflarski
Abstract:
Current theories of language recovery after stroke are limited by a reliance on small studies. Here, we aimed to test predictions of current theory and resolve inconsistencies regarding right hemispheric contributions to long-term recovery. We first defined the canonical semantic network in 43 healthy controls. Then, in a group of 43 patients with chronic post-stroke aphasia, we tested whether act…
▽ More
Current theories of language recovery after stroke are limited by a reliance on small studies. Here, we aimed to test predictions of current theory and resolve inconsistencies regarding right hemispheric contributions to long-term recovery. We first defined the canonical semantic network in 43 healthy controls. Then, in a group of 43 patients with chronic post-stroke aphasia, we tested whether activity in this network predicted performance on measures of semantic comprehension, naming, and fluency while controlling for lesion volume effects. Canonical network activation accounted for 22-33% of the variance in language test scores. Whole-brain analyses corroborated these findings, and revealed a core set of regions showing positive relationships to all language measures. We next evaluated the relationship between activation magnitudes in left and right hemispheric portions of the network, and how right hemispheric activation related to the extent of left hemispheric damage. Activation magnitudes in the each hemispheric network were strongly correlated, but four right frontal regions showed heightened activity in patients with large lesions. Activity in two of these regions (inferior frontal gyrus pars opercularis and supplementary motor area) was associated with better language abilities in patients with larger lesions, but poorer language abilities in patients with smaller lesions. Our results indicate that bilateral language networks support language processing after stroke, and that right hemispheric activations related to extensive left hemisphere damage occur outside of the canonical semantic network and differentially contribute to in their relationship to behavior depending on the extent of left hemispheric damage
△ Less
Submitted 26 October, 2016; v1 submitted 6 September, 2016;
originally announced September 2016.
-
Gas and dust around A-type stars at tens of Myr:signatures of cometary breakup
Authors:
J S Greaves,
W S Holland,
B C Matthews,
J P Marshall,
W R F Dent,
P Woitke,
M C Wyatt,
L Matra,
A Jackson
Abstract:
Discs of dusty debris around main-sequence star indicate fragmentation of orbiting planetesimals, and for a few A-type stars, a gas component is also seen that may come from collisionally-released volatiles. Here we find the sixth example of a CO-hosting disc, around the 30Myr old A0-star HD 32297. Two more of these CO-hosting stars, HD 21997 and 49 Cet, have also been imaged in dust with SCUBA-2…
▽ More
Discs of dusty debris around main-sequence star indicate fragmentation of orbiting planetesimals, and for a few A-type stars, a gas component is also seen that may come from collisionally-released volatiles. Here we find the sixth example of a CO-hosting disc, around the 30Myr old A0-star HD 32297. Two more of these CO-hosting stars, HD 21997 and 49 Cet, have also been imaged in dust with SCUBA-2 within the SONS project. A census of 27 A-type debris hosts within 125 pc now shows 7/16 detections of carbon-bearing gas within the 5-50 Myr epoch, with no detections in 11 older systems. Such a prolonged period of high fragmentation rates corresponds quite well to the epoch when most of the Earth was assembled from planetesimal collisions. Recent models propose that collisional products can be spatially asymmetric if they originate at one location in the disc, with CO particularly exhibiting this behaviour as it can photodissociate in less than an orbital period. Of the six CO-hosting systems, only beta Pic is in clear support of this hypothesis. However, radiative transfer modelling with the ProDiMo code shows that the CO is also hard to explain in a proto-planetary disc context.
△ Less
Submitted 17 July, 2016; v1 submitted 13 July, 2016;
originally announced July 2016.
-
Far-infrared and sub-millimetre imaging of HD~76582's circumstellar disk
Authors:
J. P. Marshall,
M. Booth,
W. S. Holland,
B. C. Matthews,
J. S. Greaves,
B. Zuckerman
Abstract:
Debris disks, the tenuous rocky and icy remnants of planet formation, are believed to be evidence for planetary systems around other stars. The JCMT/SCUBA-2 debris disk legacy survey 'SCUBA-2 Observations of Nearby Stars' (SONS) observed 100 nearby stars, amongst them HD~76582, for evidence of such material. Here we present imaging observations by JCMT/SCUBA-2 and \textit{Herschel}/PACS at sub-mil…
▽ More
Debris disks, the tenuous rocky and icy remnants of planet formation, are believed to be evidence for planetary systems around other stars. The JCMT/SCUBA-2 debris disk legacy survey 'SCUBA-2 Observations of Nearby Stars' (SONS) observed 100 nearby stars, amongst them HD~76582, for evidence of such material. Here we present imaging observations by JCMT/SCUBA-2 and \textit{Herschel}/PACS at sub-millimetre and far-infrared wavelengths, respectively. We simultaneously model the ensemble of photometric and imaging data, spanning optical to sub-millimetre wavelengths, in a self-consistent manner. At far-infrared wavelengths, we find extended emission from the circumstellar disk providing a strong constraint on the dust spatial location in the outer system, although the angular resolution is too poor to constrain the interior of the system. In the sub-millimetre, photometry at 450 and 850~$μ$m reveal a steep fall-off that we interpret as a disk dominated by moderately-sized dust grains ($a_{\rm min}~=~36~μ$m), perhaps indicative of a non-steady-state collisional cascade within the disk. A disk architecture of three distinct annuli, comprising an unresolved component at $\sim$ 20 au and outer components at 80 and 270 au, along with a very steep particle size distribution ($γ~=~5$), is proposed to match the observations.
△ Less
Submitted 28 April, 2016;
originally announced April 2016.
-
Herschel detects oxygen in the beta Pictoris debris disk
Authors:
A. Brandeker,
G. Cataldi,
G. Olofsson,
B. Vandenbussche,
B. Acke,
M. J. Barlow,
J. A. D. L. Blommaert,
M. Cohen,
W. R. F. Dent,
C. Dominik,
J. Di Francesco,
M. Fridlund,
W. K. Gear,
A. M. Glauser,
J. S. Greaves,
P. M. Harvey,
A. M. Heras,
M. R. Hogerheijde,
W. S. Holland,
R. Huygen,
R. J. Ivison,
S. J. Leeks,
T. L. Lim,
R. Liseau,
B. C. Matthews
, et al. (6 additional authors not shown)
Abstract:
The young star beta Pictoris is well known for its dusty debris disk, produced through the grinding down by collisions of planetesimals, kilometre-sized bodies in orbit around the star. In addition to dust, small amounts of gas are also known to orbit the star, likely the result from vaporisation of violently colliding dust grains. The disk is seen edge on and from previous absorption spectroscopy…
▽ More
The young star beta Pictoris is well known for its dusty debris disk, produced through the grinding down by collisions of planetesimals, kilometre-sized bodies in orbit around the star. In addition to dust, small amounts of gas are also known to orbit the star, likely the result from vaporisation of violently colliding dust grains. The disk is seen edge on and from previous absorption spectroscopy we know that the gas is very rich in carbon relative to other elements. The oxygen content has been more difficult to assess, however, with early estimates finding very little oxygen in the gas at a C/O ratio 20x higher than the cosmic value. A C/O ratio that high is difficult to explain and would have far-reaching consequences for planet formation. Here we report on observations by the far-infrared space telescope Herschel, using PACS, of emission lines from ionised carbon and neutral oxygen. The detected emission from C+ is consistent with that previously reported being observed by the HIFI instrument on Herschel, while the emission from O is hard to explain without assuming a higher-density region in the disk, perhaps in the shape of a clump or a dense torus, required to sufficiently excite the O atoms. A possible scenario is that the C/O gas is produced by the same process responsible for the CO clump recently observed by ALMA in the disk, and that the re-distribution of the gas takes longer than previously assumed. A more detailed estimate of the C/O ratio and the mass of O will have to await better constraints on the C/O gas spatial distribution.
△ Less
Submitted 25 April, 2016;
originally announced April 2016.
-
The Dark Energy Camera
Authors:
B. Flaugher,
H. T. Diehl,
K. Honscheid,
T. M. C. Abbott,
O. Alvarez,
R. Angstadt,
J. T. Annis,
M. Antonik,
O. Ballester,
L. Beaufore,
G. M. Bernstein,
R. A. Bernstein,
B. Bigelow,
M. Bonati,
D. Boprie,
D. Brooks,
E. J. Buckley-Geer,
J. Campa,
L. Cardiel-Sas,
F. J. Castander,
J. Castilla,
H. Cease,
J. M. Cela-Ruiz,
S. Chappa,
E. Chi
, et al. (93 additional authors not shown)
Abstract:
The Dark Energy Camera is a new imager with a 2.2-degree diameter field of view mounted at the prime focus of the Victor M. Blanco 4-meter telescope on Cerro Tololo near La Serena, Chile. The camera was designed and constructed by the Dark Energy Survey Collaboration, and meets or exceeds the stringent requirements designed for the wide-field and supernova surveys for which the collaboration uses…
▽ More
The Dark Energy Camera is a new imager with a 2.2-degree diameter field of view mounted at the prime focus of the Victor M. Blanco 4-meter telescope on Cerro Tololo near La Serena, Chile. The camera was designed and constructed by the Dark Energy Survey Collaboration, and meets or exceeds the stringent requirements designed for the wide-field and supernova surveys for which the collaboration uses it. The camera consists of a five element optical corrector, seven filters, a shutter with a 60 cm aperture, and a CCD focal plane of 250 micron thick fully-depleted CCDs cooled inside a vacuum Dewar. The 570 Mpixel focal plane comprises 62 2kx4k CCDs for imaging and 12 2kx2k CCDs for guiding and focus. The CCDs have 15 microns x15 microns pixels with a plate scale of 0.263 arc sec per pixel. A hexapod system provides state-of-the-art focus and alignment capability. The camera is read out in 20 seconds with 6-9 electrons readout noise. This paper provides a technical description of the camera's engineering, construction, installation, and current status.
△ Less
Submitted 11 April, 2015;
originally announced April 2015.
-
The JCMT Gould Belt Survey: low-mass proto-planetary discs from a SCUBA-2 census of NGC1333
Authors:
P. Dodds,
J. Greaves,
A. Scholz,
J. Hatchell,
W. S. Holland,
JCMT Gould Belt Survey Team
Abstract:
NGC1333 is a 1-2 Myr old cluster of stars in the Perseus molecular cloud. We used 850mu data from the Gould Belt Survey with SCUBA-2 on the JCMT to measure or place limits on disc masses for 82 Class II sources in this cluster. Eight disc-candidates were detected; one is estimated to have mass of about 9 Jupiter masses in dust plus gas, while the others host only 2-4 Jupiter masses of circumstella…
▽ More
NGC1333 is a 1-2 Myr old cluster of stars in the Perseus molecular cloud. We used 850mu data from the Gould Belt Survey with SCUBA-2 on the JCMT to measure or place limits on disc masses for 82 Class II sources in this cluster. Eight disc-candidates were detected; one is estimated to have mass of about 9 Jupiter masses in dust plus gas, while the others host only 2-4 Jupiter masses of circumstellar material. None of these discs exceeds the threshold for the 'Minimum Mass Solar Nebula' (MMSN). This reinforces previous claims that only a small fraction of Class II sources at an age of 1-2 Myr has discs exceeding the MMSN threshold and thus can form a planetary system like our own. However, other regions with similarly low fractions of MMSN discs (IC348, UpSco, SigmaOri) are thought to be older than NGC1333. Compared with coeval regions, the exceptionally low fraction of massive discs in NGC1333 cannot easily be explained by the effects of UV radiation or stellar encounters. Our results indicate that additional environmental factors significantly affect disc evolution and the outcome of planet formation by core accretion.
△ Less
Submitted 21 November, 2014;
originally announced November 2014.