Showing 1–36 of 36 results for author: Ogitsu, T

Dynamics of ballistic photocurrents driven by Coulomb scattering

Authors: Liang Z. Tan, Xavier Andrade, Sangeeta Rajpurohit, Alfredo A. Correa, Tadashi Ogitsu

Abstract: First principles real-time time dependent density functional theory (rt-TDDFT) calculations reveal the existence of ballistic photocurrents generated by Coulomb scattering, a form of photocurrent that has not previously been considered as a mechanism for the bulk photovoltaic effect. With monolayer GeS as an example, it is predicted that ballistic currents can exceed shift currents under experimen… ▽ More First principles real-time time dependent density functional theory (rt-TDDFT) calculations reveal the existence of ballistic photocurrents generated by Coulomb scattering, a form of photocurrent that has not previously been considered as a mechanism for the bulk photovoltaic effect. With monolayer GeS as an example, it is predicted that ballistic currents can exceed shift currents under experimentally accessible conditions. Moreover, these simulations reveal recombination pathways that work to modify shift current magnitudes beyond perturbation theory predictions. △ Less

Submitted 12 August, 2024; originally announced August 2024.

Characteristic THz-emissions induced by optically excited collective orbital modes

Authors: Sangeeta Rajpurohit, Christian Jooss, Simone Techert, Tadashi Ogitsu, P. E. Blöchl, L. Z. Tan

Abstract: We study the generation of collective orbital modes, their evolution, and the characteristic non-linear optical response induced by them in a photoinduced orbital-ordered correlated oxide using real-time simulations based on an interacting multiband tight-binding (TB) model. The d-d optical transitions under femtoseconds light-pulse in a orbital-ordered state excite collective orbital modes, also… ▽ More We study the generation of collective orbital modes, their evolution, and the characteristic non-linear optical response induced by them in a photoinduced orbital-ordered correlated oxide using real-time simulations based on an interacting multiband tight-binding (TB) model. The d-d optical transitions under femtoseconds light-pulse in a orbital-ordered state excite collective orbital modes, also known as "orbitons". The consistent inclusion of electronic interactions and the coupling between charge, spin, and lattice degrees of freedom in the TB-model provide a better understanding of the underlying mechanisms of the collective orbital modes. The dynamics of Jahn-Teller vibrational modes in the photoinduced state modify the intersite orbital interaction, which further amplifies these orbital modes. In the presence of weak ferroelectricity, the excitation of collective orbital modes induces a strong THz oscillatory photocurrent which is long-lived. This suggests an alternative way to experimentally detect quasiparticles describing such collective modes through THz-emission studies in the photoinduced state. Our study also elucidates that quasiparticle dynamics in improper ferroelectric oxides can be exploited to achieve highly interesting and non-trivial optoelectronic properties. △ Less

Submitted 15 June, 2023; originally announced June 2023.

Comments: 6 pages and 4 figures

Ballistic photocurrent driven by optical phonon modes in a polaronic ferroelectric

Authors: Sangeeta Rajpurohit, Tadashi Ogitsu, Liang Z. Tan

Abstract: We investigate the effect of local electron-phonon coupling on nonlinear optical conductivity in an interacting ferroelectric system. Using real-time simulations, we show an enhancement in nonlinear conductivity under linearly-polarized light due to generation of the phonon-assisted ballistic-current in addition to the injection-current generated by electron-hole pairs. The optically excited phono… ▽ More We investigate the effect of local electron-phonon coupling on nonlinear optical conductivity in an interacting ferroelectric system. Using real-time simulations, we show an enhancement in nonlinear conductivity under linearly-polarized light due to generation of the phonon-assisted ballistic-current in addition to the injection-current generated by electron-hole pairs. The optically excited phonon modes generate an asymmetric carrier distribution that causes a strong directional ballistic-current. The ballistic-current enhances the photocurrent several times at above band-gap excitation frequencies and is sublinearly dependent on the excitation intensity. This strong phonon-assisted zero-frequency directional ballistic-current demonstrates an alternative way to boost the bulk photovoltaic effect (BPVE) in electronic ferroelectric materials with strong local electron-phonon coupling. △ Less

Submitted 19 August, 2022; originally announced August 2022.

Comments: 5 pages, 4 figures

A Work Proposal for a Collaborative Study of Magnet Technology for a Future Muon Collider

Authors: L. Bottura, D. Aguglia, B. Auchmann, T. Arndt, J. Beard, A. Bersani, F. Boattini, M. Breschi, B. Caiffi, X. Chaud, M. Dam, F. Debray, H. De Gersem, E. De Matteis, A. Dudarev, S. Farinon, A. Kario, R. Losito, S. Mariotto, M. Mentink, R. Musenich, T. Ogitsu, M. Prioli, L. Quettier, L. Rossi , et al. (8 additional authors not shown)

Abstract: In this paper we elaborate on the nature and challenges for the magnet systems of a muon collider as presently considered within the scope of the International Muon Collider Collaboration (IMCC). We outline the structure of the work proposed over the coming period of five years to study and demonstrate relevant magnet technology. The proposal, which is part of the overall work planned to establish… ▽ More In this paper we elaborate on the nature and challenges for the magnet systems of a muon collider as presently considered within the scope of the International Muon Collider Collaboration (IMCC). We outline the structure of the work proposed over the coming period of five years to study and demonstrate relevant magnet technology. The proposal, which is part of the overall work planned to establish feasibility of a muon collider, is in direct response to the recent recommendations received from the Laboratories Directors Group (LDG). The plan is to profit from joint activities, within the scope of the IMCC and beyond, implemented through direct and EU-funded contributions. △ Less

Submitted 29 March, 2022; v1 submitted 26 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

A Strategic Approach to Advance Magnet Technology for Next Generation Colliders

Authors: G. Ambrosio, K. Amm, M. Anerella, G. Apollinari, D. Arbelaez, B. Auchmann, S. Balachandran, M. Baldini, A. Ballarino, S. Barua, E. Barzi, A. Baskys, C. Bird, J. Boerme, E. Bosque, L. Brouwer, S. Caspi, N. Cheggour, G. Chlachidze, L. Cooley, D. Davis, D. Dietderich, J. DiMarco, L. English, L. Garcia Fajardo , et al. (52 additional authors not shown)

Abstract: Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the domi… ▽ More Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the dominant cost driver for future collider facilities. As the community considers opportunities to explore new energy frontiers, the importance of advanced magnet technology - both in terms of magnet performance and in the magnet technology's potential for cost reduction - is evident, as the technology status is essential for informed decisions on targets for physics reach and facility feasibility. △ Less

Submitted 26 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

R&D works for Superconducting Magnet for Future Accelerator Applications in Japan

Authors: Toru Ogitsu, Tatsushi Nakamoto, Ken-ichi Sasaki, Michinaka Sugano, Masami Iio, Kento Suzuki, Makoto Yoshida, Satoshi Awaji, Naoyuki Amemiya

Abstract: KEK cryogenics science center is developing superconducting magnet technology for future accelerator science. Three major technological categories are focused; 1) high precision 3D magnetic field technology based on the g-2/EDM magnet developments, 2) rad-hard superconducting magnet technology based on the COMET magnet developments, and 3) high magnetic field superconducting magnet technology for… ▽ More KEK cryogenics science center is developing superconducting magnet technology for future accelerator science. Three major technological categories are focused; 1) high precision 3D magnetic field technology based on the g-2/EDM magnet developments, 2) rad-hard superconducting magnet technology based on the COMET magnet developments, and 3) high magnetic field superconducting magnet technology for future colliders based on the LHC MQXA and HL-LHC D1 magnet developments. Extensive studies including Nb3Sn conductor and magnet developments for high field magnets and HTS for rad-hard superconducting magnets are ongoing with various collaboration programs such as the US-Japan research collaboration. △ Less

Submitted 22 March, 2022; originally announced March 2022.

Superconducting detector magnets for high energy physics

Authors: Matthias Mentink, Ken-ichi Sasaki, Benoit Cure, Nikkie Deelen, Alexey Dudarev, Mitsushi Abe, Masami Iio, Yasuhiro Makida, Takahiro Okamura, Toru Ogitsu, Naoyuki Sumi, Akira Yamamoto, Makoto Yoshida, Hiromi Iinuma

Abstract: Various superconducting detector solenoids for particle physics have been developed in the world. The key technology is the aluminum-stabilized superconducting conductor for almost all the detector magnets in particle physics experiments. With the progress of the conductor, the coil fabrication technology has progressed as well, such as the inner coil winding technique, indirect cooling, transpare… ▽ More Various superconducting detector solenoids for particle physics have been developed in the world. The key technology is the aluminum-stabilized superconducting conductor for almost all the detector magnets in particle physics experiments. With the progress of the conductor, the coil fabrication technology has progressed as well, such as the inner coil winding technique, indirect cooling, transparent vacuum vessel, quench protection scheme using pure aluminum strips and so on. The detector solenoids design study is in progress for future big projects in Japan and Europe, that is, ILC, FCC and CLIC, based on the technologies established over many years. The combination of good mechanical properties and keeping a high RRR is a key point for the development of Al-stabilized conductor. The present concern for the detector solenoid development is to have been gradually losing the key technologies and experiences, because large-scale detector magnets with Al-stabilized conductor has not been fabricated after the success of CMS and ATLAS-CS in LHC. Complementary efforts are needed to resume an equivalent level of expertise, to extend the effort on research and to develop these technologies and apply them to future detector magnet projects. Especially, further effort is necessary for the industrial technology of Al-stabilized superconductor production. The worldwide collaboration with relevant institutes and industries will be critically important to re-realize and validate the required performances. Some detector solenoids for mid-scale experiment wound with conventional copper-stabilized Nb-Ti conductor require precise control of magnetic field distribution. The development efforts are on-going in terms of the magnetic field design technology with high precision simulation, coil fabrication technology and control method of magnetic field distribution. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: 35 pages, 35 figures, 8 tables, contribution to Snowmass 2021

INQ, a modern GPU-accelerated computational framework for (time-dependent) density functional theory

Authors: Xavier Andrade, Chaitanya Das Pemmaraju, Alexey Kartsev, Jun Xiao, Aaron Lindenberg, Sangeeta Rajpurohit, Liang Z. Tan, Tadashi Ogitsu, Alfredo A. Correa

Abstract: We present INQ, a new implementation of density functional theory (DFT) and time-dependent DFT (TDDFT) written from scratch to work on graphical processing units (GPUs). Besides GPU support, INQ makes use of modern code design features and takes advantage of newly available hardware. By designing the code around algorithms, rather than against specific implementations and numerical libraries, we a… ▽ More We present INQ, a new implementation of density functional theory (DFT) and time-dependent DFT (TDDFT) written from scratch to work on graphical processing units (GPUs). Besides GPU support, INQ makes use of modern code design features and takes advantage of newly available hardware. By designing the code around algorithms, rather than against specific implementations and numerical libraries, we aim to provide a concise and modular code. The result is a fairly complete DFT/TDDFT implementation in roughly 12,000 lines of open-source C++ code representing a modular platform for community-driven application development on emerging high-performance computing architectures for the simulation of materials. △ Less

Submitted 7 June, 2021; originally announced June 2021.

Comments: 25 pages, 10 figures

A non-perturbative study of bulk photovoltaic effect enhanced by an optically induced phase transition

Authors: Sangeeta Rajpurohit, C. Das Pemmaraju, Tadashi Ogitsu, Liang Z Tan

Abstract: Solid systems with strong correlations and interactions under light illumination have the potential for exhibiting interesting bulk photovoltaic behavior in the non-perturbative regime, which has remained largely unexplored in the past theoretical studies. We investigate the bulk photovoltaic response of a perovskite manganite with strongly coupled electron-spin-lattice dynamics, using real-time s… ▽ More Solid systems with strong correlations and interactions under light illumination have the potential for exhibiting interesting bulk photovoltaic behavior in the non-perturbative regime, which has remained largely unexplored in the past theoretical studies. We investigate the bulk photovoltaic response of a perovskite manganite with strongly coupled electron-spin-lattice dynamics, using real-time simulations performed with a tight-binding model. The transient changes in the band structure and the photoinduced phase transitions, emerging from spin and phonon dynamics, result in a nonlinear current versus intensity behavior beyond the perturbative limit. The current rises sharply across a photoinduced magnetic phase transition, which later saturates at higher light intensities due to excited phonon and spin modes. The predicted peak photoresponsivity is orders of magnitude higher than other known ferroelectric oxides such as BiFeO$_3$. We disentangle phonon-and spin-assisted components to the ballistic photocurrent, showing that they are comparable in magnitude. Our results illustrate a promising alternative way for controlling and optimizing the bulk photovoltaic response through the photoinduced phase transitions in strongly-correlated systems. △ Less

Submitted 24 May, 2021; originally announced May 2021.

Comments: 6 pages, 4 figures

Supernova Model Discrimination with Hyper-Kamiokande

Authors: Hyper-Kamiokande Collaboration, :, K. Abe, P. Adrich, H. Aihara, R. Akutsu, I. Alekseev, A. Ali, F. Ameli, I. Anghel, L. H. V. Anthony, M. Antonova, A. Araya, Y. Asaoka, Y. Ashida, V. Aushev, F. Ballester, I. Bandac, M. Barbi, G. J. Barker, G. Barr, M. Batkiewicz-Kwasniak, M. Bellato, V. Berardi, M. Bergevin , et al. (478 additional authors not shown)

Abstract: Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-colla… ▽ More Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-collapse supernovae is not yet well understood. Hyper-Kamiokande is a next-generation neutrino detector that will be able to observe the neutrino flux from the next galactic core-collapse supernova in unprecedented detail. We focus on the first 500 ms of the neutrino burst, corresponding to the accretion phase, and use a newly-developed, high-precision supernova event generator to simulate Hyper-Kamiokande's response to five different supernova models. We show that Hyper-Kamiokande will be able to distinguish between these models with high accuracy for a supernova at a distance of up to 100 kpc. Once the next galactic supernova happens, this ability will be a powerful tool for guiding simulations towards a precise reproduction of the explosion mechanism observed in nature. △ Less

Submitted 20 July, 2021; v1 submitted 13 January, 2021; originally announced January 2021.

Comments: 21 pages, 7 figures. Article based on thesis published as arXiv:2002.01649. v2: added references and some explanations in response to reviewer comments

Journal ref: Astrophys.J. 916 (2021) 15

Structural Motifs and Bonding in Two Families of Boron Structures Predicted at Megabar Pressures

Authors: Katerina P. Hilleke, Eva Zurek, Tadashi Ogitsu, Shuai Zhang

Abstract: The complex crystal chemistry of elemental boron has led to numerous proposed structures with distinctive motifs as well as contradictory findings. Herein, evolutionary structure searches performed at 100 GPa have uncovered a series of potential new metastable phases of boron, and bonding analyses were carried out to elucidate their electronic structure. These polymorphs, dynamically stable at 100… ▽ More The complex crystal chemistry of elemental boron has led to numerous proposed structures with distinctive motifs as well as contradictory findings. Herein, evolutionary structure searches performed at 100 GPa have uncovered a series of potential new metastable phases of boron, and bonding analyses were carried out to elucidate their electronic structure. These polymorphs, dynamically stable at 100 GPa, were grouped into two families. The first was derived from the thermodynamic minimum at these conditions, $α$-Ga, whereas channels comprised the second. Two additional intergrowth structures were uncovered, and it was shown they could be constructed by stacking layers of $α$-Ga-like and channel-like allotropes on top of each other. A detailed bonding analysis revealed networks of four-center $σ$-bonding functions linked by two-center B-B bonds in the $α$-Ga based structures, and networks that were largely composed of three-center $σ$-bonding functions in the channel-based structures. Seven of these high pressure phases were found to be metastable at atmospheric conditions, and their Vickers hardnesses were estimated to be $\sim$36 GPa. △ Less

Submitted 1 January, 2021; originally announced January 2021.

Comments: 14 pages, 12 figures, 3 tables

Journal ref: Phys. Rev. Materials 5, 053605 (2021)

The Hyper-Kamiokande Experiment -- Snowmass LOI

Authors: Hyper-Kamiokande Collaboration, :, K. Abe, P. Adrich, H. Aihara, R. Akutsu, I. Alekseev, A. Ali, F. Ameli, L. H. V. Anthony, A. Araya, Y. Asaoka, V. Aushev, I. Bandac, M. Barbi, G. Barr, M. Batkiewicz-Kwasniak, M. Bellato, V. Berardi, L. Bernard, E. Bernardini, L. Berns, S. Bhadra, J. Bian, A. Blanchet , et al. (366 additional authors not shown)

Abstract: Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiduc… ▽ More Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiducial volume make the detector unique, that is expected to acquire an unprecedented exposure of 3.8~Mton$\cdot$year over a period of 20~years of operation. Hyper-Kamiokande combines an extremely diverse science program including nucleon decays, long-baseline neutrino oscillations, atmospheric neutrinos, and neutrinos from astrophysical origins. The scientific scope of this program is highly complementary to liquid-argon detectors for example in sensitivity to nucleon decay channels or supernova detection modes. Hyper-Kamiokande construction has started in early 2020 and the experiment is expected to start operations in 2027. The Hyper-Kamiokande collaboration is presently being formed amongst groups from 19 countries including the United States, whose community has a long history of making significant contributions to the neutrino physics program in Japan. US physicists have played leading roles in the Kamiokande, Super-Kamiokande, EGADS, K2K, and T2K programs. △ Less

Submitted 1 September, 2020; originally announced September 2020.

Comments: 6 pages, prepared as Snowmass2021 LOI

Benchmarking boron carbide equation of state using computation and experiment

Authors: Shuai Zhang, Michelle C. Marshall, Lin H. Yang, Philip A. Sterne, Burkhard Militzer, Markus Daene, James A. Gaffney, Andrew Shamp, Tadashi Ogitsu, Kyle Caspersen, Amy E. Lazicki, David Erskine, Richard A. London, Peter M. Celliers, Joseph Nilsen, Heather D. Whitley

Abstract: Boron carbide (B$_4$C) is of both fundamental scientific and practical interest in inertial confinement fusion (ICF) and high energy density physics experiments. We report the results of a comprehensive computational study of the equation of state (EOS) of B$_4$C in the liquid, warm dense matter, and plasma phases. Our calculations are cross-validated by comparisons with Hugoniot measurements up t… ▽ More Boron carbide (B$_4$C) is of both fundamental scientific and practical interest in inertial confinement fusion (ICF) and high energy density physics experiments. We report the results of a comprehensive computational study of the equation of state (EOS) of B$_4$C in the liquid, warm dense matter, and plasma phases. Our calculations are cross-validated by comparisons with Hugoniot measurements up to 61 megabar from planar shock experiments performed at the National Ignition Facility (NIF). Our computational methods include path integral Monte Carlo, activity expansion, as well as all-electron Green's function Korringa-Kohn-Rostoker and molecular dynamics that are both based on density functional theory. We calculate the pressure-internal energy EOS of B$_4$C over a broad range of temperatures ($\sim$6$\times$10$^3$--5$\times$10$^8$ K) and densities (0.025--50 g/cm$^{3}$). We assess that the largest discrepancies between theoretical predictions are $\lesssim$5% near the compression maximum at 1--2$\times10^6$ K. This is the warm-dense state in which the K shell significantly ionizes and has posed grand challenges to theory and experiment. By comparing with different EOS models, we find a Purgatorio model (LEOS 2122) that agrees with our calculations. The maximum discrepancies in pressure between our first-principles predictions and LEOS 2122 are $\sim$18% and occur at temperatures between 6$\times$10$^3$--2$\times$10$^5$ K, which we believe originate from differences in the ion thermal term and the cold curve that are modeled in LEOS 2122 in comparison with our first-principles calculations. In addition, we have developed three new equation of state models and applied them to 1D hydrodynamic simulations of a polar direct-drive NIF implosion, demonstrating that these new models are now available for future ICF design studies. △ Less

Submitted 3 August, 2020; originally announced August 2020.

Comments: 20 pages, 12 figures, 2 tables

Report number: LLNL-JRNL-812984

Journal ref: Phys. Rev. E 102, 053203 (2020)

Comparison of ablators for the polar direct drive exploding pusher platform

Authors: Heather D. Whitley, G. Elijah Kemp, Charles Yeamans, Zachary Walters, Brent E. Blue, Warren Garbett, Marilyn Schneider, R. Stephen Craxton, Emma M. Garcia, Patrick W. McKenty, Maria Gatu-Johnson, Kyle Caspersen, John I. Castor, Markus Däne, C. Leland Ellison, James Gaffney, Frank R. Graziani, John Klepeis, Natalie Kostinski, Andrea Kritcher, Brandon Lahmann, Amy E. Lazicki, Hai P. Le, Richard A. London, Brian Maddox , et al. (14 additional authors not shown)

Abstract: We examine the performance of pure boron, boron carbide, high density carbon, and boron nitride ablators in the polar direct drive exploding pusher (PDXP) platform. The platform uses the polar direct drive configuration at the National Ignition Facility to drive high ion temperatures in a room temperature capsule and has potential applications for plasma physics studies and as a neutron source. Th… ▽ More We examine the performance of pure boron, boron carbide, high density carbon, and boron nitride ablators in the polar direct drive exploding pusher (PDXP) platform. The platform uses the polar direct drive configuration at the National Ignition Facility to drive high ion temperatures in a room temperature capsule and has potential applications for plasma physics studies and as a neutron source. The higher tensile strength of these materials compared to plastic enables a thinner ablator to support higher gas pressures, which could help optimize its performance for plasma physics experiments, while ablators containing boron enable the possiblity of collecting addtional data to constrain models of the platform. Applying recently developed and experimentally validated equation of state models for the boron materials, we examine the performance of these materials as ablators in 2D simulations, with particular focus on changes to the ablator and gas areal density, as well as the predicted symmetry of the inherently 2D implosion. △ Less

Submitted 30 December, 2020; v1 submitted 28 June, 2020; originally announced June 2020.

Report number: LLNL-JRNL-803851

Phase transformation in boron under shock compression

Authors: Shuai Zhang, Heather D. Whitley, Tadashi Ogitsu

Abstract: Using first-principles molecular dynamics, we calculated the equation of state and shock Hugoniot of various boron phases. We find a large mismatch between Hugoniots based on existing knowledge of the equilibrium phase diagram and those measured by shock experiments, which could be reconciled if the $α$-B$_{12}$/$β\rightarrowγ$-B$_{28}$ transition is significantly over-pressurized in boron under s… ▽ More Using first-principles molecular dynamics, we calculated the equation of state and shock Hugoniot of various boron phases. We find a large mismatch between Hugoniots based on existing knowledge of the equilibrium phase diagram and those measured by shock experiments, which could be reconciled if the $α$-B$_{12}$/$β\rightarrowγ$-B$_{28}$ transition is significantly over-pressurized in boron under shock compression. Our results also indicate that there exists an anomaly and negative Clapeyron slope along the melting curve of boron at 100 GPa and 1500--3000 Kelvin. These results enable in-depth understanding of matter under shock compression, in particular the significance of compression-rate dependence of phase transitions and kinetic effects in experimental measurements. △ Less

Submitted 31 January, 2020; originally announced January 2020.

Comments: 18 pages, 5 figures (1 in graphical abstract)

Report number: LLNL-JRNL-803936-DRAFT

Journal ref: Solid State Sciences (2020)

Optical Absorption Induced by Small Polaron Formation in Transition Metal Oxides -- The Case of Co$_3$O$_4$

Authors: Tyler J. Smart, Tuan Anh Pham, Yuan Ping, Tadashi Ogitsu

Abstract: Small polarons (SPs) are known to exist in most important transition metal oxides (TMOs); however, the nature of small polaron formation remains enigmatic, and a fundamental understanding of how SPs impact the intrinsic electronic structure and optical properties of these materials is largely lacking. In this work, we employ first-principles calculations to investigate SP formation in Co$_{3}$O… ▽ More Small polarons (SPs) are known to exist in most important transition metal oxides (TMOs); however, the nature of small polaron formation remains enigmatic, and a fundamental understanding of how SPs impact the intrinsic electronic structure and optical properties of these materials is largely lacking. In this work, we employ first-principles calculations to investigate SP formation in Co$_{3}$O$_{4}$, a highly promising material for a wide range of emerging energy applications, and we resolve the conflicting findings that have been reported on the electronic structure of the system. We confirm that the intrinsic band gap of Co$_{3}$O$_{4}$ is 1.6 eV, and we show that the formation of hole small polarons significantly influences the optical absorption spectra, leading to a 0.8 eV transition that is often misinterpreted as the band edge that defines the fundamental gap. In addition, we discuss how uniaxial strain can be utilized to probe the Jahn-Teller distortion of SP states and in turn, effect their optical transitions. Beyond Co$_{3}$O$_{4}$, our study suggests a general roadmap for establishing a first-principles computational approach that can simultaneously achieve an accurate description of SP states, electronic band structure and optical transitions of polaronic magnetic oxides. △ Less

Submitted 18 September, 2019; originally announced September 2019.

Journal ref: Phys. Rev. Materials 3, 102401 (2019)

J-PARC Neutrino Beamline Upgrade Technical Design Report

Authors: K. Abe, H. Aihara, A. Ajmi, C. Alt, C. Andreopoulos, M. Antonova, S. Aoki, Y. Asada, Y. Ashida, A. Atherton, E. Atkin, S. Ban, F. C. T. Barbato, M. Barbi, G. J. Barker, G. Barr, M. Batkiewicz, A. Beloshapkin, V. Berardi, L. Berns, S. Bhadra, J. Bian, S. Bienstock, A. Blondel, S. Bolognesi , et al. (360 additional authors not shown)

Abstract: In this document, technical details of the upgrade plan of the J-PARC neutrino beamline for the extension of the T2K experiment are described. T2K has proposed to accumulate data corresponding to $2\times{}10^{22}$ protons-on-target in the next decade, aiming at an initial observation of CP violation with $3σ$ or higher significance in the case of maximal CP violation. Methods to increase the neut… ▽ More In this document, technical details of the upgrade plan of the J-PARC neutrino beamline for the extension of the T2K experiment are described. T2K has proposed to accumulate data corresponding to $2\times{}10^{22}$ protons-on-target in the next decade, aiming at an initial observation of CP violation with $3σ$ or higher significance in the case of maximal CP violation. Methods to increase the neutrino beam intensity, which are necessary to achieve the proposed data increase, are described. △ Less

Submitted 14 August, 2019; originally announced August 2019.

A New Approach for Measuring the Muon Anomalous Magnetic Moment and Electric Dipole Moment

Authors: M. Abe, S. Bae, G. Beer, G. Bunce, H. Choi, S. Choi, M. Chung, W. da Silva, S. Eidelman, M. Finger, Y. Fukao, T. Fukuyama, S. Haciomeroglu, K. Hasegawa, K. Hayasaka, N. Hayashizaki, H. Hisamatsu, T. Iijima, H. Iinuma, K. Inami, H. Ikeda, M. Ikeno, K. Ishida, T. Itahashi, M. Iwasaki , et al. (71 additional authors not shown)

Abstract: This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon… ▽ More This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon $g-2$ experiments with unprecedented quality of the storage magnetic field. Additional significant differences from the present experimental method include a factor of 1,000 smaller transverse emittance of the muon beam (reaccelerated thermal muon beam), its efficient vertical injection into the solenoid, and tracking each decay positron from muon decay to obtain its momentum vector. The precision goal for $a_μ$ is statistical uncertainty of 450 part per billion (ppb), similar to the present experimental uncertainty, and a systematic uncertainty less than 70 ppb. The goal for EDM is a sensitivity of $1.5\times 10^{-21}~e\cdot\mbox{cm}$. △ Less

Submitted 10 March, 2019; v1 submitted 10 January, 2019; originally announced January 2019.

Comments: 24 pages, 14 figures

COMET Phase-I Technical Design Report

Authors: The COMET Collaboration, R. Abramishvili, G. Adamov, R. R. Akhmetshin, A. Allin, J. C. Angélique, V. Anishchik, M. Aoki, D. Aznabayev, I. Bagaturia, G. Ban, Y. Ban, D. Bauer, D. Baygarashev, A. E. Bondar, C. Cârloganu, B. Carniol, T. T. Chau, J. K. Chen, S. J. Chen, Y. E. Cheung, W. da Silva, P. D. Dauncey, C. Densham, G. Devidze , et al. (170 additional authors not shown)

Abstract: The Technical Design for the COMET Phase-I experiment is presented in this paper. COMET is an experiment at J-PARC, Japan, which will search for neutrinoless conversion of muons into electrons in the field of an aluminium nucleus ($μ-e$ conversion, $μ^- N \to e^- N$); a lepton flavor violating process. The experimental sensitivity goal for this process in the Phase-I experiment is… ▽ More The Technical Design for the COMET Phase-I experiment is presented in this paper. COMET is an experiment at J-PARC, Japan, which will search for neutrinoless conversion of muons into electrons in the field of an aluminium nucleus ($μ-e$ conversion, $μ^- N \to e^- N$); a lepton flavor violating process. The experimental sensitivity goal for this process in the Phase-I experiment is $3.1\times10^{-15}$, or 90 % upper limit of branching ratio of $7\times 10^{-15}$, which is a factor of 100 improvement over the existing limit. The expected number of background events is 0.032. To achieve the target sensitivity and background level, the 3.2 kW 8 GeV proton beam from J-PARC will be used. Two types of detectors, CyDet and StrECAL, will be used for detecting the \mue conversion events, and for measuring the beam-related background events in view of the Phase-II experiment, respectively. Results from simulation on signal and background estimations are also described. △ Less

Submitted 19 May, 2020; v1 submitted 21 December, 2018; originally announced December 2018.

Comments: A minor correction applied in Eq. 3

Journal ref: Progress of Theoretical and Experimental Physics, Volume 2020, Issue 3, March 2020, 033C01

Theoretical and experimental investigation of the equation of state of boron plasmas

Authors: Shuai Zhang, Burkhard Militzer, Michelle C. Gregor, Kyle Caspersen, Lin H. Yang, Tadashi Ogitsu, Damian Swift, Amy Lazicki, D. Erskine, Richard A. London, P. M. Celliers, Joseph Nilsen, Philip A. Sterne, Heather D. Whitley

Abstract: We report a theoretical equation of state (EOS) table for boron across a wide range of temperatures (5.1$\times$10$^4$-5.2$\times$10$^8$ K) and densities (0.25-49 g/cm$^3$), and experimental shock Hugoniot data at unprecedented high pressures (5608$\pm$118 GPa). The calculations are performed with full, first-principles methods combining path integral Monte Carlo (PIMC) at high temperatures and de… ▽ More We report a theoretical equation of state (EOS) table for boron across a wide range of temperatures (5.1$\times$10$^4$-5.2$\times$10$^8$ K) and densities (0.25-49 g/cm$^3$), and experimental shock Hugoniot data at unprecedented high pressures (5608$\pm$118 GPa). The calculations are performed with full, first-principles methods combining path integral Monte Carlo (PIMC) at high temperatures and density functional theory molecular dynamics (DFT-MD) methods at lower temperatures. PIMC and DFT-MD cross-validate each other by providing coherent EOS (difference $<$1.5 Hartree/boron in energy and $<$5% in pressure) at 5.1$\times$10$^5$ K. The Hugoniot measurement is conducted at the National Ignition Facility using a planar shock platform. The pressure-density relation found in our shock experiment is on top of the shock Hugoniot profile predicted with our first-principles EOS and a semi-empirical EOS table (LEOS 50). We investigate the self diffusivity and the effect of thermal and pressure-driven ionization on the EOS and shock compression behavior in high pressure and temperature conditions We study the performance sensitivity of a polar direct-drive exploding pusher platform to pressure variations based on comparison of the first-principles calculations with LEOS 50 via 1D hydrodynamic simulations. The results are valuable for future theoretical and experimental studies and engineering design in high energy density research. (LLNL-JRNL-748227) △ Less

Submitted 30 April, 2018; originally announced April 2018.

Comments: 12 pages, 9 figures, 2 tables

Journal ref: Phys. Rev. E 98, 023205 (2018)

Insertion Magnets

Authors: G. Ambrosio, M. Anerella, R. Bossert, D. Cheng, G. Chlachidze, D. Dietderich, D Duarte Ramos, P. Fabbricatore, S. Farinon, H. Felice, P. Ferracin, P. Fessia, J. Garcia Matos, A. Ghosh, P. Hagen, S. Izquierdo Bermudez, M. Juchno, S. Krave, M. Marchevsky, T. Nakamoto, T. Ogitsu, J. C. Perez, H. Prin, J. M. Rifflet, G. L. Sabbi , et al. (12 additional authors not shown)

Abstract: Chapter 3 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temper… ▽ More Chapter 3 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC. △ Less

Submitted 26 May, 2017; originally announced May 2017.

Comments: 19 pages, Chapter 3 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report

Journal ref: CERN Yellow Report CERN 2015-005, pp. 61-79

Properties of B4C in the shocked state for pressures up to 1.5 TPa

Authors: Andrew Shamp, Eva Zurek, Tadashi Ogitsu, Dayne E. Fratanduono, Sebastien Hamel

Abstract: Density Functional Theory calculations using the quasi-harmonic approximation have been used to calculate the solid Hugoniot of two polytypes of boron carbide up to 100 GPa. Under the assumption that segregation into the elemental phases occurs around the pressure that the B11Cp(CBC) polytype becomes thermodynamically unstable with respect to boron and carbon, two discontinuities in the Hugoniot,… ▽ More Density Functional Theory calculations using the quasi-harmonic approximation have been used to calculate the solid Hugoniot of two polytypes of boron carbide up to 100 GPa. Under the assumption that segregation into the elemental phases occurs around the pressure that the B11Cp(CBC) polytype becomes thermodynamically unstable with respect to boron and carbon, two discontinuities in the Hugoniot, one at 50 GPa and one at 90-100 GPa, are predicted. The former is a result of phase segregation, and the latter a phase transition within boron. First principles molecular dynamics (FPMD) simulations were employed to calculate the liquid Hugoniot of B4C up to 1.5 TPa, and the results are compared to recent experiments carried out at the Omega Laser Facility up to 700 GPa [Phys. Rev. B 94, 184107 (2016)]. A generally good agreement between theory and experiment was observed. Analysis of the FPMD simulations provides evidence for an amorphous, but covalently bound, fluid below 438 GPa, and an atomistic fluid at higher pressures and temperatures. △ Less

Submitted 22 May, 2017; originally announced May 2017.

Comments: 10 pages, 6 figures

MuSIC: delivering the world's most intense muon beam

Authors: S. Cook, R. D'Arcy, A. Edmonds, M. Fukuda, K. Hatanaka, Y. Hino, Y. Kuno, M. Lancaster, Y. Mori, T. Ogitsu, H. Sakamoto, A. Sato, N. H. Tran, N. M. Truong, M. Wing, A. Yamamoto, M. Yoshida

Abstract: A new muon beamline, muon science innovative channel (MuSIC), was set up at the Research Centre for Nuclear Physics (RCNP), Osaka University, in Osaka, Japan, using the 392 MeV proton beam impinging on a target. The production of an intense muon beam relies on the efficient capture of pions, which subsequently decay to muons, using a novel superconducting solenoid magnet system. After the pion-cap… ▽ More A new muon beamline, muon science innovative channel (MuSIC), was set up at the Research Centre for Nuclear Physics (RCNP), Osaka University, in Osaka, Japan, using the 392 MeV proton beam impinging on a target. The production of an intense muon beam relies on the efficient capture of pions, which subsequently decay to muons, using a novel superconducting solenoid magnet system. After the pion-capture solenoid the first $36^\circ$ of the curved muon transport line was commissioned and the muon flux was measured. In order to detect muons, a target of either copper or magnesium was placed to stop muons at the end of the muon beamline. Two stations of plastic scintillators located upstream and downstream from the muon target were used to reconstruct the decay spectrum of muons. In a complementary method to detect negatively-charged muons, the X-ray spectrum yielded by muonic atoms in the target were measured in a germanium detector. Measurements, at a proton beam current of 6 pA, yielded $(10.4 \pm 2.7) \times 10^5$ muons per Watt of proton beam power ($μ^+$ and $μ^-$), far in excess of other facilities. At full beam power (400 W), this implies a rate of muons of $(4.2 \pm 1.1) \times 10^8$ muons s$^{-1}$, amongst the highest in the world. The number of $μ^-$ measured was about a factor of 10 lower, again by far the most efficient muon beam produced. The set up is a prototype for future experiments requiring a high-intensity muon beam, such as a muon collider or neutrino factory, or the search for rare muon decays which would be a signature for phenomena beyond the Standard Model of particle physics. Such a muon beam can also be used in other branches of physics, nuclear and condensed matter, as well as other areas of scientific research. △ Less

Submitted 25 October, 2016; originally announced October 2016.

Comments: 15 pages, 5 figures, submitted to Phys. Rev. ST-Acc. Beams

Self-optimizing layered hydrogen evolution catalyst with high basal-plane activity

Authors: Yuanyue Liu, Jingjie Wu, Ken P. Hackenberg, Jing Zhang, Y. Morris Wang, Yingchao Yang, Kunttal Keyshar, Jing Gu, Tadashi Ogitsu, Robert Vajtai, Jun Lou, Pulickel M. Ajayan, Brandon C. Wood, Boris I. Yakobson

Abstract: Hydrogen is a promising energy carrier and key agent for many industrial chemical processes1. One method for generating hydrogen sustainably is via the hydrogen evolution reaction (HER), in which electrochemical reduction of protons is mediated by an appropriate catalyst-traditionally, an expensive platinum-group metal. Scalable production requires catalyst alternatives that can lower materials or… ▽ More Hydrogen is a promising energy carrier and key agent for many industrial chemical processes1. One method for generating hydrogen sustainably is via the hydrogen evolution reaction (HER), in which electrochemical reduction of protons is mediated by an appropriate catalyst-traditionally, an expensive platinum-group metal. Scalable production requires catalyst alternatives that can lower materials or processing costs while retaining the highest possible activity. Strategies have included dilute alloying of Pt2 or employing less expensive transition metal alloys, compounds or heterostructures (e.g., NiMo, metal phosphides, pyrite sulfides, encapsulated metal nanoparticles)3-5. Recently, low-cost, layered transition-metal dichalcogenides (MX2)6 based on molybdenum and tungsten have attracted substantial interest as alternative HER catalysts7-11. These materials have high intrinsic per-site HER activity; however, a significant challenge is the limited density of active sites, which are concentrated at the layer edges.8,10,11. Here we use theory to unravel electronic factors underlying catalytic activity on MX2 surfaces, and leverage the understanding to report group-5 MX2 (H-TaS2 and H-NbS2) electrocatalysts whose performance instead derives from highly active basal-plane sites. Beyond excellent catalytic activity, they are found to exhibit an unusual ability to optimize their morphology for enhanced charge transfer and accessibility of active sites as the HER proceeds. This leads to long cycle life and practical advantages for scalable processing. The resulting performance is comparable to Pt and exceeds all reported MX2 candidates. △ Less

Submitted 19 August, 2016; originally announced August 2016.

First-principles simulation of capacitive charging of graphene and implications for supercapacitor design

Authors: Maxwell D. Radin, Tadashi Ogitsu, Minoru Otani, Juergen Biener, Brandon C. Wood

Abstract: Supercapacitors store energy via the formation of an electric double layer, which generates a strong electric field at the electrode-electrolyte interface. Unlike conventional metallic electrodes, graphene-derived materials suffer from a low electronic density of states (i.e., quantum capacitance), which limits their ability to redistribute charge and efficiently screen this field. To explore thes… ▽ More Supercapacitors store energy via the formation of an electric double layer, which generates a strong electric field at the electrode-electrolyte interface. Unlike conventional metallic electrodes, graphene-derived materials suffer from a low electronic density of states (i.e., quantum capacitance), which limits their ability to redistribute charge and efficiently screen this field. To explore these effects, we introduce a first-principles approach based on the effective screening medium framework, which is used to directly simulate the charge storage behavior of single- and multi-layered graphene in a way that more closely approximates operating devices. We demonstrate that the presence of the interfacial field significantly alters the capacitance in electrodes thinner than a few graphene layers, deriving in large part from intrinsic space-charge screening limitations. The capacitance is also found to be highly sensitive to the gap between the electrode and the solvent (contact layer), which offers possibilities for tuning the interfacial capacitance of the electrode by proper engineering of the electrolyte. Our results offer an alternative interpretation of discrepancies between experimental measurements and fixed-band models, and provide specific implications for improving graphene-based devices. △ Less

Submitted 3 October, 2014; originally announced October 2014.

Comments: 12 pages, 3 figures

Journal ref: Phys. Rev. B 91, 125415 (2015)

First Muon-Neutrino Disappearance Study with an Off-Axis Beam

Authors: T2K Collaboration, K. Abe, N. Abgrall, Y. Ajima, H. Aihara, J. B. Albert, C. Andreopoulos, B. Andrieu, M. D. Anerella, S. Aoki, O. Araoka, J. Argyriades, A. Ariga, T. Ariga, S. Assylbekov, D. Autiero, A. Badertscher, M. Barbi, G. J. Barker, G. Barr, M. Bass, M. Batkiewicz, F. Bay, S. Bentham, V. Berardi , et al. (422 additional authors not shown)

Abstract: We report a measurement of muon-neutrino disappearance in the T2K experiment. The 295-km muon-neutrino beam from Tokai to Kamioka is the first implementation of the off-axis technique in a long-baseline neutrino oscillation experiment. With data corresponding to 1.43 10**20 protons on target, we observe 31 fully-contained single muon-like ring events in Super-Kamiokande, compared with an expectati… ▽ More We report a measurement of muon-neutrino disappearance in the T2K experiment. The 295-km muon-neutrino beam from Tokai to Kamioka is the first implementation of the off-axis technique in a long-baseline neutrino oscillation experiment. With data corresponding to 1.43 10**20 protons on target, we observe 31 fully-contained single muon-like ring events in Super-Kamiokande, compared with an expectation of 104 +- 14 (syst) events without neutrino oscillations. The best-fit point for two-flavor nu_mu -> nu_tau oscillations is sin**2(2 theta_23) = 0.98 and |Δm**2_32| = 2.65 10**-3 eV**2. The boundary of the 90 % confidence region includes the points (sin**2(2 theta_23),|Δm**2_32|) = (1.0, 3.1 10**-3 eV**2), (0.84, 2.65 10**-3 eV**2) and (1.0, 2.2 10**-3 eV**2). △ Less

Submitted 6 January, 2012; originally announced January 2012.

Comments: 7 pages, 4 figures

Journal ref: Physical Review D 85, 031103(R) (2012)

Measurements of the T2K neutrino beam properties using the INGRID on-axis near detector

Authors: K. Abe, N. Abgrall, Y. Ajima, H. Aihara, J. B. Albert, C. Andreopoulos, B. Andrieu, M. D. Anerella, S. Aoki, O. Araoka, J. Argyriades, A. Ariga, T. Ariga, S. Assylbekov, D. Autiero, A. Badertscher, M. Barbi, G. J. Barker, G. Barr, M. Bass, M. Batkiewicz, F. Bay, S. Bentham, V. Berardi, B. E. Berger , et al. (407 additional authors not shown)

Abstract: Precise measurement of neutrino beam direction and intensity was achieved based on a new concept with modularized neutrino detectors. INGRID (Interactive Neutrino GRID) is an on-axis near detector for the T2K long baseline neutrino oscillation experiment. INGRID consists of 16 identical modules arranged in horizontal and vertical arrays around the beam center. The module has a sandwich structure o… ▽ More Precise measurement of neutrino beam direction and intensity was achieved based on a new concept with modularized neutrino detectors. INGRID (Interactive Neutrino GRID) is an on-axis near detector for the T2K long baseline neutrino oscillation experiment. INGRID consists of 16 identical modules arranged in horizontal and vertical arrays around the beam center. The module has a sandwich structure of iron target plates and scintillator trackers. INGRID directly monitors the muon neutrino beam profile center and intensity using the number of observed neutrino events in each module. The neutrino beam direction is measured with accuracy better than 0.4 mrad from the measured profile center. The normalized event rate is measured with 4% precision. △ Less

Submitted 14 November, 2011; originally announced November 2011.

Comments: 32 pages, 27 figures, submitted to Nucl. Instr. and Meth. A

Residual Strain Dependence on Matrix Structure in RHQ-Nb3Al Wires by Neutron Diffraction Measurement

Authors: Xinzhe Jin, Tatsushi Nakamoto, Takayoshi Ito, Stefanus Harjo, Akihiro Kikuchi, Takao Takeuchi, Kiyosumi Tsuchiya, Tsutomu Hemmi, Toru Ogitsu, Akira Yamamoto

Abstract: We prepared three types of non-Cu RHQ-Nb3Al wire samples with different matrix structures: an all-Ta matrix,a composite matrix of Nb and Ta with a Ta inter filament, and an all-Nb matrix. Neutron diffraction patterns of the wire samples were measured at room temperature in J-PARC "TAKUMI". To obtain residual strains of materials, we estimated lattice constant a by multi-peak analysis in the wire.… ▽ More We prepared three types of non-Cu RHQ-Nb3Al wire samples with different matrix structures: an all-Ta matrix,a composite matrix of Nb and Ta with a Ta inter filament, and an all-Nb matrix. Neutron diffraction patterns of the wire samples were measured at room temperature in J-PARC "TAKUMI". To obtain residual strains of materials, we estimated lattice constant a by multi-peak analysis in the wire. Powder sample of each wire was measured, where the powder was considered to be strain-free. The grain size of all the powder samples was below 0.02 mm. For wire sample with the all-Nb matrix, we also obtained lattice spacing d by a single-peak analysis. Residual strains of Nb3Al filament were estimated from the two analysis results and were compared. Result, residual strains obtained from the multi-peak analysis showed a good accuracy with small standard deviation. The multi-peak analysis results for the residual strains of Nb3Al filament in the three samples were all tensile residual strain in the axial direction, they are 0.12%, 0.12%, and 0.05% for the all-Ta matrix, the composite matrix, and the all-Nb matrix, respectively. Difference in the residual strain of Nb3Al filament between the composite and all-Nb matrix samples indicates that type of inter-filament materials show a great effect on the residual strain. In this paper, we report the method of measurement, method of analysis, and results for residual strain in the tree types of non-Cu RHO-Nb3Al wires. △ Less

Submitted 3 November, 2011; originally announced November 2011.

Comments: 7 pages, 8 figures

Tensile Strain Dependence of Critical Current for RHQ-Nb3Al Wires

Authors: Xinzhe Jin, Hidetoshi Oguro, Tatsushi Nakamoto, Satoshi Awaji, Toru Ogitsu, Kiyosumi Tsuchiya, Akira Yamamoto, Akihiro Kikuchi, Takao Takeuchi

Abstract: KEK and NIMS have been jointly developing Nb3Al superconducting wire with a rapid heating and quenching (RHQ) method towards high field accelerator magnets in the Large Hadron Collider (LHC) luminosity upgrade. A15-type superconductors such as Nb3Al and Nb3Sn exhibit strain dependence with respect to their critical currents. Therefore, a thorough understanding of strain behavior is necessary for h… ▽ More KEK and NIMS have been jointly developing Nb3Al superconducting wire with a rapid heating and quenching (RHQ) method towards high field accelerator magnets in the Large Hadron Collider (LHC) luminosity upgrade. A15-type superconductors such as Nb3Al and Nb3Sn exhibit strain dependence with respect to their critical currents. Therefore, a thorough understanding of strain behavior is necessary for high field accelerator magnet development, which will be critical for the luminosity upgrade of the LHC. △ Less

Submitted 13 May, 2012; v1 submitted 2 November, 2011; originally announced November 2011.

Comments: This paper has been withdrawn by the author due to the larger errors in experiments as shown in Fig. 3

J-PARC MUSE H-line optimization for the g-2 and MuHFS experiments

Authors: A. Toyoda, Y. Fujiwara, Y. Fukao, O. Kamigaito, N. Kawamura, Y. Matsuda, T. Mibe, T. Ogitsu, N. Saito, K. Sasaki, K. Shimomura, M. Sugano, K. Tanaka, D. Tomono, H. A. Torii

Abstract: Significant deviation of the anomalous magnetic moment value (g-2) observed by the muon g-2 experiment should be confirmed by the other experiment. This value is experimentally determined by frequency difference observed by the g-2/EDM experiment and muon magnetic moment observed by the muonium hyperfine splitting experiment (MuHFS). Both two experiments are planned to be performed at H-line of th… ▽ More Significant deviation of the anomalous magnetic moment value (g-2) observed by the muon g-2 experiment should be confirmed by the other experiment. This value is experimentally determined by frequency difference observed by the g-2/EDM experiment and muon magnetic moment observed by the muonium hyperfine splitting experiment (MuHFS). Both two experiments are planned to be performed at H-line of the J-PARC/MUSE under construction. We optimized the beamline layout for each experiment with G4beamline. For both experiments, statistics is the most important, thus beamline transmission efficiency should be maximized. Especially for the g-2, the purpose of the present effort is to compromise between small beam size and small leakage field. For the MuHFS, it is crucial to minimize leakage field at around final focus position, and to get all stopped muons within good field region of MuHFS magnet. Conceptual design of the several final focusing systems will be presented. contribution (or invited paper) to NUFACT 11, XIIIth International Workshop on Neutrino Factories, Super beams and Beta beams, 1-6 August 2011, CERN and University of Geneva △ Less

Submitted 5 October, 2011; originally announced October 2011.

Comments: 4 pages, 5 figures, contribution (or invited paper) to NUFACT 11, XIIIth International Workshop on Neutrino Factories, Super beams and Beta beams, 1-6 August 2011, CERN and University of Geneva

Indication of Electron Neutrino Appearance from an Accelerator-produced Off-axis Muon Neutrino Beam

Authors: T2K Collaboration, K. Abe, N. Abgrall, Y. Ajima, H. Aihara, J. B. Albert, C. Andreopoulos, B. Andrieu, S. Aoki, O. Araoka, J. Argyriades, A. Ariga, T. Ariga, S. Assylbekov, D. Autiero, A. Badertscher, M. Barbi, G. J. Barker, G. Barr, M. Bass, F. Bay, S. Bentham, V. Berardi, B. E. Berger, I. Bertram , et al. (387 additional authors not shown)

Abstract: The T2K experiment observes indications of $ν_μ\rightarrow ν_e$ appearance in data accumulated with $1.43\times10^{20}$ protons on target. Six events pass all selection criteria at the far detector. In a three-flavor neutrino oscillation scenario with $|Δm_{23}^2|=2.4\times10^{-3}$ eV$^2$, $\sin^2 2θ_{23}=1$ and $\sin^2 2θ_{13}=0$, the expected number of such events is 1.5$\pm$0.3(syst.). Under th… ▽ More The T2K experiment observes indications of $ν_μ\rightarrow ν_e$ appearance in data accumulated with $1.43\times10^{20}$ protons on target. Six events pass all selection criteria at the far detector. In a three-flavor neutrino oscillation scenario with $|Δm_{23}^2|=2.4\times10^{-3}$ eV$^2$, $\sin^2 2θ_{23}=1$ and $\sin^2 2θ_{13}=0$, the expected number of such events is 1.5$\pm$0.3(syst.). Under this hypothesis, the probability to observe six or more candidate events is 7$\times10^{-3}$, equivalent to 2.5$σ$ significance. At 90% C.L., the data are consistent with 0.03(0.04)$<\sin^2 2θ_{13}<$ 0.28(0.34) for $δ_{\rm CP}=0$ and a normal (inverted) hierarchy. △ Less

Submitted 25 July, 2011; v1 submitted 14 June, 2011; originally announced June 2011.

Comments: 20 pages, 6 figures, version published in PRL

Journal ref: Phys.Rev.Lett.107:041801,2011

The T2K Experiment

Authors: T2K Collaboration, K. Abe, N. Abgrall, H. Aihara, Y. Ajima, J. B. Albert, D. Allan, P. -A. Amaudruz, C. Andreopoulos, B. Andrieu, M. D. Anerella, C. Angelsen, S. Aoki, O. Araoka, J. Argyriades, A. Ariga, T. Ariga, S. Assylbekov, J. P. A. M. de André, D. Autiero, A. Badertscher, O. Ballester, M. Barbi, G. J. Barker, P. Baron , et al. (499 additional authors not shown)

Abstract: The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross… ▽ More The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross section measurements and sterile neutrino searches. The experiment uses an intense proton beam generated by the J-PARC accelerator in Tokai, Japan, and is composed of a neutrino beamline, a near detector complex (ND280), and a far detector (Super-Kamiokande) located 295 km away from J-PARC. This paper provides a comprehensive review of the instrumentation aspect of the T2K experiment and a summary of the vital information for each subsystem. △ Less

Submitted 8 June, 2011; v1 submitted 6 June, 2011; originally announced June 2011.

Comments: 33 pages, 32 figures, Submitted and accepted by NIM A. Editor: Prof. Chang Kee Jung, Department of Physics and Astronomy, SUNY Stony Brook, chang.jung@sunysb.edu, 631-632-8108 Submit Edited to remove line numbers

Summary of the J-PARC UCN Taskforce

Authors: The J-Parc Ucn Taskforce, :, Tomokazu Aso, Masatoshi Futakawa, Tomiyoshi Haruyama, Kazuo Hasegawa, Yujiro Ikeda, Masanori Ikegami, Yukihide Kamiya, Takashi Kato, Nobuhiro Kimura, Yoshiaki Kiyanagi, Yasuo Maekawa, Yasuhiro Masuda, Taichi Miura, Masaharu Numajiri, Toru Ogitsu, Nobuo Ouchi, Kotaro Sato, Hirohiko Shimizu, Eiichi Takasaki, Nobuyuki Takenaka, Akira Yamamoto, Satoru Yamashita

Abstract: Discussions in the taskforce meetings in the period of Jan.-Mar. 2009 on the technical possibility of the ultracold neutron (UCN) source at the Japan Proton Accelerator Research Complex (J-PARC) is summarized. Discussions in the taskforce meetings in the period of Jan.-Mar. 2009 on the technical possibility of the ultracold neutron (UCN) source at the Japan Proton Accelerator Research Complex (J-PARC) is summarized. △ Less

Submitted 2 July, 2009; originally announced July 2009.

Comments: 13 pages, 16 figures

A quantum fluid of metallic hydrogen suggested by first-principles calculations

Authors: Stanimir A. Bonev, Eric Schwegler, Tadashi Ogitsu, Giulia Galli

Abstract: It is generally assumed that solid hydrogen will transform into a metallic alkali-like crystal at sufficiently high pressure. However, some theoretical models have also suggested that compressed hydrogen may form an unusual two-component (protons and electrons) metallic fluid at low temperature, or possibly even a zero-temperature liquid ground state. The existence of these new states of matter… ▽ More It is generally assumed that solid hydrogen will transform into a metallic alkali-like crystal at sufficiently high pressure. However, some theoretical models have also suggested that compressed hydrogen may form an unusual two-component (protons and electrons) metallic fluid at low temperature, or possibly even a zero-temperature liquid ground state. The existence of these new states of matter is conditional on the presence of a maximum in the melting temperature versus pressure curve (the 'melt line'). Previous measurements of the hydrogen melt line up to pressures of 44 GPa have led to controversial conclusions regarding the existence of this maximum. Here we report ab initio calculations that establish the melt line up to 200 GPa. We predict that subtle changes in the intermolecular interactions lead to a decline of the melt line above 90 GPa. The implication is that as solid molecular hydrogen is compressed, it transforms into a low-temperature quantum fluid before becoming a monatomic crystal. The emerging low-temperature phase diagram of hydrogen and its isotopes bears analogies with the familiar phases of 3He and 4He, the only known zero-temperature liquids, but the long-range Coulombic interactions and the large component mass ratio present in hydrogen would ensure dramatically different properties △ Less

Submitted 17 October, 2004; originally announced October 2004.

Comments: See related paper: cond-mat/0410408

Journal ref: Nature 431, 669 (2004)

High-pressure molecular phases of solid carbon dioxide

Authors: S. A. Bonev, F. Gygi, T. Ogitsu, G. Galli

Abstract: We present a theoretical study of solid carbon dioxide up to 50GPa and 1500K using first-principles calculations. In this pressure-temperature range, interpretations of recent experiments have suggested the existence of CO2 phases which are intermediate between molecular and covalent-bonded solids. We reexamine the concept of intermediate phases in the CO2 phase diagram and propose instead molec… ▽ More We present a theoretical study of solid carbon dioxide up to 50GPa and 1500K using first-principles calculations. In this pressure-temperature range, interpretations of recent experiments have suggested the existence of CO2 phases which are intermediate between molecular and covalent-bonded solids. We reexamine the concept of intermediate phases in the CO2 phase diagram and propose instead molecular structures, which provide an excellent agreement with measurements. △ Less

Submitted 15 May, 2003; originally announced May 2003.

Comments: 4 pages, 4 figures, revtex4, submitted to Phys. Rev. Lett

Role of Conduction Electrons in the ortho-KC$_{60}$ Polymer

Authors: T. Ogitsu, K. Kusakabe, S. Tsuneyuki, Y. Tateyama

Abstract: We present first-principles band calculations as well as structural optimization of the orthorhombic K$_1$C$_{60}$ polymerized phase. We found three-dimensional inter-fullerene bonding/anti-bonding characters consisting of $t_{1u}$ molecular orbitals with $p$-like symmetry in the conduction bands. The formation of the four-membered ring connecting the fullerenes lifts the $p_x$ band from the con… ▽ More We present first-principles band calculations as well as structural optimization of the orthorhombic K$_1$C$_{60}$ polymerized phase. We found three-dimensional inter-fullerene bonding/anti-bonding characters consisting of $t_{1u}$ molecular orbitals with $p$-like symmetry in the conduction bands. The formation of the four-membered ring connecting the fullerenes lifts the $p_x$ band from the continuous $p_y$-$p_z$ band, where the z-axis is parallel to the chain. The asymmetry between $p_x$ and $p_y$ may play an important role in binding the chains with the rotational configuration proposed by Stephens et al. △ Less

Submitted 24 December, 1997; originally announced December 1997.

Comments: 8 pages, 1 JPG figure, 4 Color JPG figures, uses REVTEX. Submitted to Phys.Rev.Lett