- 466 sadashiv Peth
Alka Talkies Chowk, Pune, Maharashtra, India - 8600684001
- noneedit
- "International Journal of Innovations in Engineering Research and Technology [IJIERT]" is an International Journal fo... more"International Journal of Innovations in Engineering Research and Technology [IJIERT]" is an International Journal for paper publication in the field of engineering Research sciencesedit
- Mr. Pravin R. Choubeedit
The aim of this research was to empirically unravel the strategic prowess of leadership management styles employee motivation issues, as it concerns GSM operators in Port Harcourt. The study used cross-sectional survey design in... more
The aim of this research was to empirically unravel the strategic prowess of leadership management styles employee motivation issues, as it concerns GSM operators in Port Harcourt. The study used cross-sectional survey design in structured questionnaire to collect data from 400 employees of GSM firms. A total of 3 hypotheses were proposed and statistically tested with Spearman's Correlation Coefficient tool, aided by SPSS version 23.0. Results revealed that participatory leadership has a positive and significantly relationship with employee motivation. However, autocratic leadership had a positive but weak relationship with employee motivation. Based on these findings, this research concluded that participative leadership is a veritable management tool that can help in the motivation of employees of the organization. In this light, the research recommended that management and staffs of GSM operators, especially those in the position of leadership should embraced participatory leadership management style as strategy of employees' motivation. Also, strategists of telecommunication firms should be less or if possible, circumvent autocratic leadership management style in order to sustain employees' motivation.
Research Interests:
The aim of this research was to empirically investigate the relationship between leadership management style and academic staff performance of Nigeria tertiary institutions with emphasis on post Covid-19 effect. The study applied cross... more
The aim of this research was to empirically investigate the relationship between leadership management style and academic staff performance of Nigeria tertiary institutions with emphasis on post Covid-19 effect. The study applied cross sectional survey design in structured questionnaire to collect data from 400 lecturers of public universities in Rivers State. Spearman's Rank Correlation Coefficient tool was used with the help of SPSS Version 21.0, to statistically analyzing data obtained from the field. Results revealed that leadership management style has a positive and significant relationship with academic staff performance, however, Covid-19 moderates the extent of relationship between both variables by reducing the impact of the former on the latter. Consequently, the research concluded that analytical leadership is a veritable management tool that when deployed, will improve staff productivity. Therefore, staff performance in universities can be enhanced and measured with high level of productivity through the instrumentality of analytical leadership orientation. Based on the above, the research recommends that government at all levels should apply the analytical leadership orientation, as this research has proven the possibility of enhancing staff productivity and academic performance through this approach.
Research Interests:
The article considers the creation and operation of the educational and
consulting center KNAUF SamGASI as one of the positive examples of the integration of
production with education
consulting center KNAUF SamGASI as one of the positive examples of the integration of
production with education
Research Interests:
Duplicate detection is that the method of separating several versions of the same real-world object in the very information supply. Duplicate detection may be a disadvantage of considerable significance in a variety of applications, in... more
Duplicate detection is that the method of separating several versions of the same real-world object in the very information supply. Duplicate detection may be a disadvantage of considerable significance in a variety of applications, in combination with client relationship management, personal information management, or data processing. There is a class of models self-addressed and surveyed for the duplicate identification of hierarchical data such as the extensible markup language (XML). Associate algorithmic software XMLDup can auto-address the theorem network to find out the XML pieces of a chance. The heterogeneous information duplication technique can also be used for XMLDup to build and ensure stratified duplication by XML mining. The heterogeneous information duplication technique can also be used for XMLDup to build and ensure stratified duplication by XML mining. This work will set the key stone for alleviating duplication in large information sets. Here theorem network will be used for duplicate detection, and the XMLDup technique will be able to perform duplicate detection with high power and efficiency by experimenting with increasing artificial and world dataset. This technique can be used to compare any level of the XML tree from root to leaves. The
Research Interests:
Results of the studies of none-autoclave cellular are generalised In article with one axis and sprain with removal and without removal of friction, as well as is presented information on nature of the change to relative deformation under... more
Results of the studies of none-autoclave cellular are generalised In article with one axis and sprain with removal and without removal of friction, as well as is presented information on nature of the change to relative deformation under central compression and sprain. The Organized results of the studies of none-autoclave cellular at two-axis "sprain-compressions". The Broughted results of the analysis experimental data, on the grounds of which are made corresponding to findings, as well as results of the determination of the change relative deformation of none-autoclave cellular in condition of the clean shift, is revealled that toughness of none-autoclave cellular in two-axis "Compressions-sprains" on 13,5% lower, at sprain on axis of the symmetries.
Research Interests:
The latest developments in the design and construction of deep pits and slopes in urban development are described. The latest developments, especially in the fields of instrumentation and measuring methods, are considered. It is shown... more
The latest developments in the design and construction of deep pits and slopes in urban development are described. The latest developments, especially in the fields of instrumentation and measuring methods, are considered. It is shown that investment in complex preparatory work and monitoring contributes to an increase in the efficiency of project implementation. Making an optimal decision requires not only time and knowledge, but also the conscious cooperation of all interested parties and specialists.
Research Interests:
This article discusses environmental issues, the negative impact of harmful substances on the environment, the desertification process, the negative impact of industrial facilities on the environment, the improper use of water resources,... more
This article discusses environmental issues, the negative impact of harmful substances on the environment, the desertification process, the negative impact of industrial facilities on the environment, the improper use of water resources, the negative impact of these factors on human health, and disease prevention measures.
Research Interests:
The article presents the results of studies on the purification of swimming pool water carried out on a pilot filtering unit. A high and stable retention capacity of the auxiliary filtering layer of perlite in the mode of constant speed... more
The article presents the results of studies on the purification of swimming pool water
carried out on a pilot filtering unit. A high and stable retention capacity of the auxiliary
filtering layer of perlite in the mode of constant speed has been established. The
possibility and expediency of using the filter perlite of the Tashkent UzPerlit plant as
an upstream filtering material for water purification of swimming pools is shown.
carried out on a pilot filtering unit. A high and stable retention capacity of the auxiliary
filtering layer of perlite in the mode of constant speed has been established. The
possibility and expediency of using the filter perlite of the Tashkent UzPerlit plant as
an upstream filtering material for water purification of swimming pools is shown.
Research Interests:
In the present paper the experimental and numerical study carried out on the two models of high-rise buildings under different value of wind velocity with 0 degree of wind attack. Two shapes of building namely square and triangle are... more
In the present paper the experimental and numerical study carried out on the two models of
high-rise buildings under different value of wind velocity with 0 degree of wind attack. Two
shapes of building namely square and triangle are considered. Pressure measurements are
made on the rigid models of high-rise buildings made of timber. The models are tested in a
wind tunnel. (3D) ANSYS (Fluid Fluent) was employed with finite volume method to
predict the wind pressures on high-rise building using specified boundary conditions. RNG
k-ε turbulence model was applied for square shape and Spalart-Allmaras turbulent model for
triangle shape in order to simulate the wind turbulence. It is concluded that wind pressure
resulting from wind tunnel test have a very good agreement with the wind pressure results
from CFD for different value of velocity for two models. It can be seen from a comparison
that the design pressure of the square model is less than the design pressure of the triangle
model with different speed and the percentage of difference is about (20-25%).
high-rise buildings under different value of wind velocity with 0 degree of wind attack. Two
shapes of building namely square and triangle are considered. Pressure measurements are
made on the rigid models of high-rise buildings made of timber. The models are tested in a
wind tunnel. (3D) ANSYS (Fluid Fluent) was employed with finite volume method to
predict the wind pressures on high-rise building using specified boundary conditions. RNG
k-ε turbulence model was applied for square shape and Spalart-Allmaras turbulent model for
triangle shape in order to simulate the wind turbulence. It is concluded that wind pressure
resulting from wind tunnel test have a very good agreement with the wind pressure results
from CFD for different value of velocity for two models. It can be seen from a comparison
that the design pressure of the square model is less than the design pressure of the triangle
model with different speed and the percentage of difference is about (20-25%).
Research Interests:
It was achieved to improve agro physical properties of soil by forming of 22, 41-52,92t/ha green biomass of pea, chick pea, rape and barley when sown as green manure as well as tilling it into soil in summer July 10 wheat freed areas, and... more
It was achieved to improve agro physical properties of soil by forming of 22, 41-52,92t/ha green biomass of pea, chick pea, rape and barley when sown as green manure as well as tilling it into soil in summer July 10 wheat freed areas, and autumn October 10 cotton freed areas. With a 10-0,25 mm sized of macro aggregates portion was over 2,96-6,9 % in 0,20 cm of soil layer in summer green manure variant and it was over 2,37-6,41 % autumn green manure applied variants comparatively to control without green manure. In 20-40cm of soil layer the portion of macro aggregates differs from the tilling layer, and makes up 69,04 %-68,72% in control variant-without green manure when applied summer and autumn green manure variants, if these indicators are between 71,31-73,53 %; 70,59-73,0 % , it provides soil grainy, serves to increase of the mass of soil and increases soil fertility as well. In its turn, by establishing favorable condition of branching the root system of cotton-plant will be achieved to get high and quality yield
Research Interests:
(PhD) докторант, Самаркандского государственного архитектурно строительного института им. Мирзо Улугбека, Аннотация: В данной статье приводятся рекомендации по проведению съемок GNSS различного назначения в Республике Узбекистан,... more
(PhD) докторант, Самаркандского государственного архитектурно строительного института им. Мирзо Улугбека, Аннотация: В данной статье приводятся рекомендации по проведению съемок GNSS различного назначения в Республике Узбекистан, рекомендации по определению координат геодезических точек вокруг месторождений, а также возможность определения местоположения точек GNSS вблизи месторождений. Рассматриваются вопросы оптимизации координат точек спутниковой геодезической сети Узбекистана и их привязки к международным стандартам с использованием современных информационных технологий. Ключевые слова и фразы: GNSS, GPS, WGS-84, вектор, кинематическая "real-time" съемка, кинематика "stop-and-go". Основным режимом сбора данных для всех GNSS съёмок является наблюдение базовых линий (векторов). В простейшем случае один из приемников помещается на точку с известными координатами, а другой помещается на точку, пространственное положение которой необходимо определить. В течение определенного периода времени, зависящего от конкретного вида съемки, производится наблюдение базовой линии, после чего приемник перемещается на следующую точку. Одним из наибольших отличий GPS съёмок по сравнению с традиционными видами геодезических съемок заключается в том, что приращения координат между станциями вычисляются на математическом эллипсоиде WGS-84 (World Geodetic System), а не в принятой плановой системе координат. При этом вычисляется относительное положение определяемых станций относительно базовых, которые затем трансформируются на используемую модель эллипсоида в принятой картографической проекции, например на эллипсоид Красовского в прямоугольной проекции Гаусса. Существует несколько способов трансформации координат с
Research Interests:
Most people who live in Eritrea defecate in the open. In fact, open defecation is far more common in rural Eritrea than in urban Eritrea. Given that most people in Eritrea live in rural areas, it leaves a lot to be desired, especially... more
Most people who live in Eritrea defecate in the open. In fact, open defecation is far more common in rural Eritrea than in urban Eritrea. Given that most people in Eritrea live in rural areas, it leaves a lot to be desired, especially from a public health perspective. Using annual time series data on the number of people who practice open defecation in Eritrea from 2000-2017, the study predicts the annual number of people who will still be practicing open defecation over the period 2017-2021. The study applies the Box-Jenkins ARIMA methodology. The diagnostic ADF tests show that the ODR series under consideration is an I (1) variable. Based on the AIC, the study presents the ARIMA (0, 1, 1) model as the optimal model. The diagnostic tests further reveal that the presented model is very stable and its residuals are stationary in levels and also normally distributed. The results of the study indicate that the number of people practicing open defecation in Eritrea is likely to decline, although slightly, over the period 2018-2022, from approximately 66% to almost 62% of the total population. Indeed, open defecation is still very high in Eritrea. The study suggested a 3-fold policy recommendation to be put into consideration, especially by the Eritrean government.
Research Interests:
В данной статье приводятся рекомендации по использованию средств GNSS при установке и обновлении геодезических сетей Республики Узбекистан, решении задач практического, научного и оборонного значения со стороны Государственной... more
В данной статье приводятся рекомендации по использованию средств
GNSS при установке и обновлении геодезических сетей Республики Узбекистан,
решении задач практического, научного и оборонного значения со стороны
Государственной геодезической сети, а также принцип перехода от государственной
спутниковой геодезической сети (ГСГС). использование других методов космической
геодезии в процессе создания, совершенствования Национальной геодезической сети,
целесообразность размещения точек GNSS. Рассматриваются вопросы оптимизации
координат точек спутниковой геодезической сети Узбекистана и их привязки к
международным стандартам с использованием современных информационных
технологий.
GNSS при установке и обновлении геодезических сетей Республики Узбекистан,
решении задач практического, научного и оборонного значения со стороны
Государственной геодезической сети, а также принцип перехода от государственной
спутниковой геодезической сети (ГСГС). использование других методов космической
геодезии в процессе создания, совершенствования Национальной геодезической сети,
целесообразность размещения точек GNSS. Рассматриваются вопросы оптимизации
координат точек спутниковой геодезической сети Узбекистана и их привязки к
международным стандартам с использованием современных информационных
технологий.
Research Interests:
Using annual time series data on the number of people who practice open defecation in Ethiopia from 2000-2017, the study predicts the annual number of people who will still be practicing open defecation over the period 2018-2022. The... more
Using annual time series data on the number of people who practice open defecation in Ethiopia from 2000-2017, the study predicts the annual number of people who will still be practicing open defecation over the period 2018-2022. The study applies the Box-Jenkins ARIMA methodology. The diagnostic ADF tests indicate that the series under consideration is an I (1) variable. Based on the AIC, the study presents the ARIMA (2, 1, 0) model as the best model. The diagnostic tests further indicate that the presented model is stable and its residuals are stationary in levels. The results of the study indicate that the number of people practicing open defecation in Ethiopia is likely to decline over the period 2018-2022, from as high as 19% to as low as 5.69% of the total population. In order to sustainably maintain this desirable downwards trend, the study suggested a threefold policy recommendation to be put into consideration, especially by the Ethiopian government.
Research Interests:
Otabek Ismatullaev XXX Defectology III-student of the course Annotation: The article discusses education issues with a special corrective direction, organized taking into account the positive opportunities for children for the general... more
Otabek Ismatullaev XXX Defectology III-student of the course Annotation: The article discusses education issues with a special corrective direction, organized taking into account the positive opportunities for children for the general development of a mentally retarded child, the acquisition of knowledge, skills and abilities.
Research Interests:
Using annual time series data on the number of people who practice open defecation in Solomon Islands from 2000-2017, the study predicts the annual number of people who will still be practicing open defecation over the period 2018-2022.... more
Using annual time series data on the number of people who practice open defecation in Solomon Islands from 2000-2017, the study predicts the annual number of people who will still be practicing open defecation over the period 2018-2022. The study applies the Box-Jenkins ARIMA method. The diagnostic ADF tests show that the ODPS series under consideration is an I (1) variable. Based on the AIC, the study presents the ARIMA (3, 1, 0) model as the optimal model. The diagnostic tests further reveal that the presented model is quite stable and its residuals are stationary in levels and also normally distributed. The results of the study indicate that the number of people practicing open defecation in Solomon Islands is likely to decline slightly over the period 2018-2022, from approximately 53.5% to 52.7% of the total population. This points to the fact that open defecation is persistant in Solomon Islands and is still unacceptably high. The study suggested a twofold policy recommendation to be put into consideration, especially by the government of the Solomon Islands.
Research Interests:
Blower is used to deliver the air or gas with an appreciable rise in pressure again the flow resistance. It is an important role in various industries for airconditioning systems, furnaces and dust or fume extraction systems Based on the... more
Blower is used to deliver the air or gas with an appreciable rise in pressure again the flow resistance. It is an important role in various industries for airconditioning systems, furnaces and dust or fume extraction systems Based on the input data the design calculations has been carried out and modelled using SOLIDWORKS. The clean-up and meshing are carried out in CFD Analysis The Main Aim Behind these Project for increase energy efficiency & constant air flow delivery that enable them generate energy of up to 84% efficiency. Done the CFD investigation for getting improved parameter blend utilizing prepare. This will provide optimised design of centrifugal blower This paper gives the solution to above problems by optimization of centrifugal blower impeller by static and modal analysis using FEA for the material MS.
Research Interests:
In this Pedal operated hacksaw machine which can be used for industrial applications and Household needs in which no specific input energy or power is needed. This project consists of a crank and slider mechanism. In the mechanism pedal... more
In this Pedal operated hacksaw machine which can be used for industrial applications and Household needs in which no specific input energy or power is needed. This project consists of a crank and slider mechanism. In the mechanism pedal is directly connected to the hacksaw through crank and slider mechanism for the processing of cutting the wooden blocks, metal bars, pvc materials. The objective of the modal is using the conventional mechanical process which plays a vital role. The main aim is to reduce the human effort for machining various materials such as wooden blocks, steel, PVC etc. The power hacksaw machine, which runs on human power, works on the principle of the conversion of rotational motion to oscillatory motion. Importance of this project lies in the very fact that it is green project and helps us to reduce our electricity need. Secondly, this cutter can be used and transferred to our working place easily. Moreover, if we want we can generate electricity with our project by connecting it to dynamo, diode and battery.
Research Interests:
Concrete is one of the most widely used construction material. The global use of cement concrete is second only to the use of water. The demand for concrete as a construction material is increasing day to day. The production process of... more
Concrete is one of the most widely used construction material. The global use of cement concrete is second only to the use of water. The demand for concrete as a construction material is increasing day to day. The production process of cement releases some harmful substances, which adversely effect on environment. Design and experimental investigation on development of geopolymer concrete is important because increase in use of geopolymer concrete leads to reduction in use of regular cement concrete and ultimately production of cement. Also the fly ash and ground granulated blast furnace slag is used and the problem of dumping of these materials ultimately gets solved. In this experimental research cement is totally replaced by use of fly ash and ground granulated blast furnace slag (GGBS), and are activated by use of Alkali Activated Solution to form a cementious paste. Effect of elevated temperature is experimentally observed for various combinations of FA and GGBS and compared with ordinary cement concrete. From the experimental work it is observed that the geopolymer concrete with use of 40% fly ash and 60% GGBS gives 35% more strength than target strength. When geopolymer concrete and ordinary cement concrete is exposed to elevated temperature ranging from 300 o C to 700 o C in variation of 200 o C; comparatively geopolymer concrete has maximum 52% strength reduction, while on other hand ordinary cement concrete has maximum 67% strength reduction.
Research Interests:
The guiding mechanism is the main part of the our Project since it replaces the job of the guides by taking guided steps that are fed to the robot guide in the form of data into the program. It guides us to the required destination by... more
The guiding mechanism is the main part of the our Project since it replaces the job of the guides by taking guided steps that are fed to the robot guide in the form of data into the program. It guides us to the required destination by moving with the help of wheels. The Robot Guide is a very friendly guide that helps the students to find a particular subject book in the library since it's a robot at the end of the day. The processor in which we dump the program is also known as the "brain" which is run by a computer program. The program is very detailed as it gives commands for the moving parts of the robot to follow. There are many mechanical parts that are used in this part such as motors, wheels, and gears that make the robot move and turn. We also have a use of sensors to tell the robot about its surroundings. Sensors such as IR sensor which detects the black line and further guides the student to the shelves of the library. Alexa is a virtual assistant that was programmed and developed by Amazon and is available on almost all the wide range of products that are manufactured by Amazon, right from Amazon echo dot to Amazon FIRE TV. Alexa can be used for various tasks from a basic interaction with an AI, listening Music, listening to audiobooks, playing podcasts, for knowing weather forecast etc. It was first released in the year 2014. it has a wide variety of languages available namely English, French, Japanese, Italian, Spanish, Marathi, Japanese, Punjabi, Hindi, Portuguese. Since it is a cloud based assistant there is a requirement of active network connection for the purpose of accessing its services.
Research Interests:
GENERAL FOR FOOD RECIPES ON VARIOUS RECIPE RECOMMENDING WEBSITE DOES NOT TAKE INTO ACCOUNT THE FOOD INREDINENTS THAT ARE CURRENTLY PRESTENT WITH THE USER.
Research Interests:
Military sector is one of the most textile demanding sector with various special and critical requirements. Application of Nonwovens in the field of Flame Retardancy (FR) Uniforms will not only be cost effective but also can be produced... more
Military sector is one of the most textile demanding sector with various special and critical requirements. Application of Nonwovens in the field of Flame Retardancy (FR) Uniforms will not only be cost effective but also can be produced at higher production speeds compared to conventional woven technology. In battlefield solider are exposed to flame threats and thermal radiative, thus it gives need to the use of FR Uniforms in the Military Sector. The following paper discusses the current commercially available FR Military Uniforms and material which it is made of, fibers available for forming FR Military Uniforms and Special FR Finishes for Fire Retardancy of the fabric.
Research Interests:
Now-a-days health problems like cardiac failure, lung failures heart related diseases are arising day by day at a very high rate. Due to these problems time to time health monitoring is very essential. A modern concept is health... more
Now-a-days health problems like cardiac failure, lung failures heart related diseases are arising day by day at a very high rate. Due to these problems time to time health monitoring is very essential. A modern concept is health monitoring of a patient wirelessly. It is a major development in medical arena. Thus paper based on the monitoring of the patient that is done by the doctor continuously without actually visiting the patient. Health professionals have developed a brilliant and inexpensive health monitoring system for providing more comfortable living to the people suffering from various diseases using leading technologies like wireless communications, wearable and portable remote health monitoring device. As a result, visits of doctors to the patients constantly are decreased as the information regarding patient's health directly reaches to doctor's monitor screen from anywhere the patient resides. Also, based on this doctors can save many lives by imparting them a quick valuable service. In this, IoT is becoming a major platform for many services applications, also using Raspberry Pi not just as a sensor node but also a controller here. Paper propose a generic health monitoring system as a step forward to the progress made in this department till now.
Research Interests:
Design of Two switch buck boost converter which will operate on PV system. The proposed converter is used between PV system and load. The converter can operate in both buck as well as boost mode. Changing its mode is possible by... more
Design of Two switch buck boost converter which will operate on PV system. The proposed converter is used between PV system and load. The converter can operate in both buck as well as boost mode. Changing its mode is possible by controlling gate signals of respective semiconductor switch. As we get the voltage as per requirement at the output of converter we overcome problem of variation in voltage from system. We can overcome the problem of the voltage variation of the electrical output from PV system. Eventually there have been much advancement in solar technology but the technological advancements are still needed for various renewable energy systems for different loading conditions. By using this TSBB convertor, we can get voltage as per requirement which is helping for distribution the electricity during any environmental condition. MATLAB simulated model with PV system followed by converter is presented. Design of converter is for variable input from PV system, according to input obtained output is varied between range of 12 V to 40 V. Position of two semiconductor switches is arranged in such a way that their source is directly connected to the ground leads to give broader selection range for gate driver IC. As in each mode we use only one semiconductor for switching purpose overall performance is improved.
Research Interests:
This review paper focuses on the overview of anti-vortex devices, pump sump system, intake structure, and their performance, in recent years. The performance characteristic of pumps is developed by the manufacturer under standard... more
This review paper focuses on the overview of anti-vortex devices, pump sump system, intake structure, and their performance, in recent years. The performance characteristic of pumps is developed by the manufacturer under standard conditions. But in actual practice because of a pump and tank design, irregularities at suction, and other parameters, the performance of the pump decreases. One of the major parameter which affects pump performance is vortex formation at the inlet of pump intake causing entrainment of air. These setup design parameters are unchangeable but the effect of vortex formation can be controlled with the help of anti-vortex devices. Therefore, it is essential to study and identify vortex formation in a pump sump system with and without AVD's. In this review paper, we will be focusing on vortex formation in the pump sump system and its effect on the pump system. Also in addition currently used methods to control vortex/swirl. This review could be useful for studying vortices and anti-vortex devices in the field of pump sump systems for future use.
Research Interests:
For important and significant reasons, the design of bridges has become very important. Bridges are in favour of improving the road network. Bridges not only help in the flow of traffic without interruption but also maintain the safety of... more
For important and significant reasons, the design of bridges has become very important. Bridges are in favour of improving the road network. Bridges not only help in the flow of traffic without interruption but also maintain the safety of the roads. To check the weather adopted section will perform safely and satisfactorily during the life time of the structure. The bridge designs are compared with different countries design codes and determined which is better and economical. The study shows combination of various loads and sections of girders used to distribute load. the depth of beam decreases, the prestressing force decreases and no of cables decreases attributable to prestressing, additional strength of concrete is used and additionally well governs usefulness.
Research Interests:
T-Earlier the purpose of automation was to increase productivity (since automated systems can work 24 hours a day) and to reduce the cost associated with human operators (i.e. wages & benefits). However, today, the focus of automation has... more
T-Earlier the purpose of automation
was to increase productivity (since automated
systems can work 24 hours a day) and to reduce
the cost associated with human operators (i.e.
wages & benefits). However, today, the focus of
automation has shifted to increasing quality and
flexibility in the manufacturing process.
was to increase productivity (since automated
systems can work 24 hours a day) and to reduce
the cost associated with human operators (i.e.
wages & benefits). However, today, the focus of
automation has shifted to increasing quality and
flexibility in the manufacturing process.
Research Interests:
White coal is a form of bio fuel produced by agriculture or forestry waste. It differs from charcoal and black coal and produces more heat than green wood. White coal is a biomass briquette which replaces fossil fuels such as lignite,... more
White coal is a form of bio fuel produced by agriculture or forestry waste. It differs from charcoal and black coal and produces more heat than green wood. White coal is a biomass briquette which replaces fossil fuels such as lignite, coal, gas and so on. It is called white coal because it does not create any type of pollution when it's burning.
Research Interests:
With the advancement in technology, the mode of interaction with the electrical devices has also advanced. This paper proposes a brain computer interface BCI for regulating everyday house hold appliances ranging from a simple mechanical... more
With the advancement in technology, the mode
of interaction with the electrical devices has also advanced.
This paper proposes a brain computer interface BCI for
regulating everyday house hold appliances ranging from a
simple mechanical switch based control of electrical devices
to IoT based wireless control facility. This technology
includes an EEG device to acquire signals associated to the
brain activity and communication protocol. The integration
of BCI and IoT for “CONTOLLING THE THINGS
REMOTELY” is a promising and emerging technique to make
home environment comfortable by easy access, automation
and optimization of home appliances such as television sets,
ac light bulbs and so on. In addition to this, monitoring brain
activity in real time through cloud server a major role in
education and medical fields to monitor the concentration
and attention levels of students and to monitor brain activity
of patients in coma respectively. [12][7][1]
of interaction with the electrical devices has also advanced.
This paper proposes a brain computer interface BCI for
regulating everyday house hold appliances ranging from a
simple mechanical switch based control of electrical devices
to IoT based wireless control facility. This technology
includes an EEG device to acquire signals associated to the
brain activity and communication protocol. The integration
of BCI and IoT for “CONTOLLING THE THINGS
REMOTELY” is a promising and emerging technique to make
home environment comfortable by easy access, automation
and optimization of home appliances such as television sets,
ac light bulbs and so on. In addition to this, monitoring brain
activity in real time through cloud server a major role in
education and medical fields to monitor the concentration
and attention levels of students and to monitor brain activity
of patients in coma respectively. [12][7][1]
Research Interests:
Today, in the era of rapid advancement in the technology, the world attempts to automate every possible task ensuring ease to human life with improved work-efficiency and quality [1]. This report describes in detail the design,... more
Today, in the era of rapid advancement in the technology, the world attempts to automate every possible task ensuring ease to human life with improved work-efficiency and quality [1]. This report describes in detail the design, development and functionality of a Smart On-Floor Service Management System developed exclusively for restaurants. The system comprises of an online wireless module enabling the customers to order food from the comfort of their respective tables via tablet phones; and a robot for delivering the dishes to the customers at their respective tables. The order once placed and confirmed by the customers will be directed to the kitchen on a LCD screen. Once ready, the order will be delivered by the robots to their respective table. The project solely aims in aiding the restaurants with a practically implementable automated on-floor service management system.
Research Interests:
Finding the equivalent of a particular word in translation, choosing one of their synonyms is an important issue. When using synonyms, different translation texts are observed, what instructions are used before and after the word, the... more
Finding the equivalent of a particular word in translation, choosing one of their synonyms is an important issue. When using synonyms, different translation texts are observed, what instructions are used before and after the word, the valence potential of the word in the synonymous line, the frequency in the valence are determined and a clear conclusion is drawn. There is no equivalent of some words in another language, that is, in that language there may not be the same concept, event, and subject. As a result, such units are translated differently and are treated as a lexeme with lingvospetsific features. The most optimal way to identify such units is also to refer to a parallel corpus.
Research Interests:
Translation is a creative process, that is, re-polishing a work of art created in one language in order to make it understandable to other peoples, re-coloring the work, trying to show the same and the same aesthetic taste for other... more
Translation is a creative process, that is, re-polishing a work of art created in one language in order to make it understandable to other peoples, re-coloring the work, trying to show the same and the same aesthetic taste for other peoples. is a very hard-working and responsible cocktail that is carried out with the intention. Why bother? Why is it responsible? This question may not be well understood by anyone who reads the finished cocktail in silence. However, if the reader tried to translate a sentence into his own language, he would be a little more thoughtful. We students often have to do translation exercises in practical classes in terms of our specialization. In this case, we focus mainly on the grammar rules taught by our teacher. Whether the possessives were used in the right place, whether the time was used correctly, whether the articles and preposition
were chosen correctly, and so on. Although there is no flaw in the translation.
were chosen correctly, and so on. Although there is no flaw in the translation.
Research Interests:
This article discusses the interaction of harmonic waves with a rigid inclusion in a viscoelastic medium. The effect of viscosity parameters on the stress-strain state of a cylindrical body is shown.
Research Interests:
Experts of the world diabetes Federation (IDF) predict that the number of patients with diabetes will increase by 1.5 times to 552 million people by 2030, and the share of the population with metabolic syndrome will increase to 800... more
Experts of the world diabetes Federation (IDF) predict that the number of patients with diabetes will increase by 1.5 times to 552 million people by 2030, and the share of the population with metabolic syndrome will increase to 800 million people. It is from this group that the number of patients with diabetes mellitus is increased by 15% annually [1].
Research Interests:
this article is about the types of classroom interaction and interactive methods which teachers can use in promoting the communication among learners in the classroom Types of classroom interaction Habtamu Walga Adaba says that Classroom... more
this article is about the types of classroom interaction and interactive methods which teachers can use in promoting the communication among learners in the classroom Types of classroom interaction Habtamu Walga Adaba says that Classroom interaction encompasses all types of interaction that goes on in a classroom. There are several different ways to categorize classroom interaction, but all of the types of interaction are important to engage learning and to create well rounded young people inside and outside the classroom If the teachers dominate the activities in the classroom, it is traditional approach. Therefore, classroom interaction shouldn't be one-way, but two-way, three-way or four-way Rivers Understanding the types of interaction help one to understand the role of classroom interaction to improve the learners' speaking skills. See the following types of interaction: Teacher-learner interaction The role of teacher is should know that the learners need to do most of the talk to activate their speaking, since this skill requires practice and experience to be developed. Because Classroom interaction then involves the verbal exchanges between learners and teachers; If teachers are advised to reduce their time of talking in the classroom interaction, then it does not mean that they have no role to play. Involving all of the learners in the interactive activities is their main job; they must apply some of the teaching strategies to get all of the students to talk. Teachers should focus on three things when they talk with their students. Firstly, they must pay attention to the kind of the language the students are able to understand, i.e. teachers should provide an output that is comprehensible for the level of all the students. Secondly, the teachers must think about what they will say to their students, hence the teacher speech is as a resource for learners. Finally, teachers also have to identify the ways in which they will speak such as the voice, tone and intonation. Learner-learner interaction According to Johnson supports that if learner-learner interaction is well structured and managed, then it can be an important factor of: cognitive development, educational
Research Interests:
This article deals with the factors of improving family education in a multilingual environment. We know that family is the root of many things. So I try to explain multilingual environment of the family.
Research Interests:
This article deals with Factors of innovative approach in improving the pedagogical skills of school teachers. There are some factors about how to be a qualified teacher.
Research Interests:
Chronic recurrent aphthous stomatitis (CHAS) remains one of the urgent problems of practical dentistry, which is confirmed by its high prevalence and lack of effectiveness of treatment methods. With inflammatory pathology of the... more
Chronic recurrent aphthous stomatitis (CHAS) remains one of the urgent problems of practical dentistry, which is confirmed by its high prevalence and lack of effectiveness of treatment methods. With inflammatory pathology of the genitourinary tract, clinic and course, pathological processes in the oral cavity are characterized by the appearance of aphthae, occurring with periodic remissions and frequent exacerbations. In the mucous and submucous membranes of the oral cavity of patients, a violation of immunological parameters, microbiological flora and atypical manifestations of the primary and secondary damaging elements of the mucous membrane are detected. The age of such patients often ranges from 20 to 40 year old patients, and before puberty, persons of both sexes are equally affected, according to the author (Pindbord data) women prevail among adult patients Based on the foregoing, the study of the specificity of the clinical course of CHRAS in patients with infectious pathology of the genitourinary tract, which haunts patients with their constant unfavorable clinical and psychological symptoms, creates problems for people not only in the medical field, but also with adverse effects on their quality of life. The purpose and objectives of the study was the study of the effectiveness of complex methods of treatment and prevention in patients with CHAS against the background of infectious diseases of the genitourinary system based on clinical and laboratory studies. Materials and research methods On the basis of the Department of "Dentistry, Pediatric Dentistry and Orthodontics" and "Urology" of TashIUV, where it is located in the "Consultative and Diagnostic Medical Center" of the Institute and the 1st Clinical Hospital in Tashkent, 180 patients aged 25 to 45 years suffering from CHRA were examined. mild, moderate and severe. Of these, 120 against the background of infectious pathology of the genitourinary tract. The examined patients were divided into 60 patients (1st main group (OG) and 1st comparative group (SG) and 60 patients with CRAS but without pathology of the genitourinary system. Of these, 20 patients were practically healthy as a conditional control group (UKG)
Each resident of the autonomous Republic of Uzbekistan must have the option to peruse the first writing in a foreign language, comprehend the content and use it in their calling. Furthermore, he ought to have the option to convey openly... more
Each resident of the autonomous Republic of Uzbekistan must have the option to peruse the first writing in a foreign language, comprehend the content and use it in their calling. Furthermore, he ought to have the option to convey openly in a foreign language with his questioner on a given point. All things considered, learning foreign languages is a prerequisite of the present globalized world.
Research Interests:
We should use different types of methods during teaching classes. And we can use majority of modern techniques while teaching verbs. With international materials it is obvious that the needs of individual students and teachers, as well as... more
We should use different types of methods during teaching classes. And we can use majority of modern techniques while teaching verbs. With international materials it is obvious that the needs of individual students and teachers, as well as the expectations of particular schools in particular countries, can never be fully met by the materials themselves while studying verbs. Indeed, most users seem to accept that what they choose will in many ways be a compromise and that they will have to adapt the materials to their situation.
Research Interests:
The research work is devoted to a topical topic in modern times (one of the problems of social ecology)-nutrition and human health, namely, the relationship between carcinogenesis and nutrition. The problem of cancer has no analogues in... more
The research work is devoted to a topical topic in modern times (one of the problems of social ecology)-nutrition and human health, namely, the relationship between carcinogenesis and nutrition. The problem of cancer has no analogues in terms of complexity and importance for humanity. Every year, 8 million people die from malignant tumours on the globe, and in Uzbekistan-about 45,000. Cancer affects all segments of the population, causing huge damage to society.
Research Interests:
The mucous membrane of the oral cavity is exposed to high antigenic load. First of all, keratinocytes are exposed to harmful effects, and the level of body resistance to damaged agents depends on their functional lability. Nevertheless,... more
The mucous membrane of the oral cavity is exposed to high antigenic load. First of all, keratinocytes are exposed to harmful effects, and the level of body resistance to damaged agents depends on their functional lability. Nevertheless, there is currently practically no data on changes in the cellular composition of the epithelial layers of the mucous membrane of the prosthetic bed and immune control of this process under prosthetics (Y. Kimura et al., 2012).
Research Interests:
The concept of the neutral zone is by no means a new one in science and was first described in 1933 by Sir Wilfred Fish in his Principles of Complete Dentures 9. Victor Beresin and Frank Schiesser published the book The Neutral Zonein... more
The concept of the neutral zone is by no means a new one in science and was first described in
1933 by Sir Wilfred Fish in his Principles of Complete Dentures 9. Victor Beresin and Frank
Schiesser published the book The Neutral Zonein Complete Dentures.
1933 by Sir Wilfred Fish in his Principles of Complete Dentures 9. Victor Beresin and Frank
Schiesser published the book The Neutral Zonein Complete Dentures.
Research Interests:
Currently, dental diseases occupy a leading place among all diseases, the level of dental diseases in children in the later years of life significantly determines the state of individual's health, but in this direction it is necessary to... more
Currently, dental diseases occupy a leading place among all diseases, the level of dental diseases in children in the later years of life significantly determines the state of individual's health, but in this direction it is necessary to attract a high level of attention from The Specialists of the field.
Research Interests:
The term cerebral palsy has been around for more than a century, and the disease itself has probably existed without a name throughout human history. However, despite its long history, there is still no consensus on this issue.
Research Interests:
The attractiveness of the face plays a huge role in the social life of people, being a significant psychosocial factor. The face largely determines its attractiveness and is the main means of identification and nonverbal communication.... more
The attractiveness of the face plays a huge role in the social life of people, being a significant psychosocial factor. The face largely determines its attractiveness and is the main means of identification and nonverbal communication. According to the results of the study[12], 63 % of patients believe that their problems with appearance had a negative impact on their personal life, and 44%-on their FW (Shurbeleva 2003) [4]. Very often, it is the desire to improve the aesthetics of teeth and face that is the main reason for contacting an orthodontist [10,15].
Research Interests:
The temporomandibular joint is a receptor organ that is mobile in three directions, connected to the proprioceptors of the periodontal and masticatory muscles and transmits information to the Central nervous system about the position of... more
The temporomandibular joint is a receptor organ that is mobile in three directions, connected to the proprioceptors of the periodontal and masticatory muscles and transmits information to the Central nervous system about the position of the lower jaw for controlling and regulating masticatory movements (Alabin I. V., Mitrofanenko V. P., 2002). Introduction Persin L. S., Sharov M. N. (2013) believe that the main causes of disorders of the temporomandibular joint are: anomalies of occlusion of the dentition-65-70%; dysfunction of the maxillofacial muscles-15-20%; psychoneurological disorders-10-15%, and only 5% of patients have dysfunction of the temporomandibular joint associated with the joint disease itself. It was found that children with TMJ pathology experience depletion of the reserve capabilities of antioxidant and antimicrobial protection against the background of increased lipoperoxidation and contamination of the mouth with pathogenic and opportunistic microflora, as well as a decrease in the pH of the oral fluid and a decrease in the level of cellular metabolism (Perova E. G., 2010, Carlos F. L., 2010). Based on the above, the purpose of this study was to study the biochemical parameters of oral fluid in children with TMJ disease. Using laboratory research methods, we studied the biochemical parameters that characterize the state of homeostasis and the level of non-specific resistance in the oral cavity in children with TMJ disease.