Unsteady flow

Numerical Flow Analysis (NFA) predictions of the flow around a transom-stern hull form are compared to laboratory measurements collected at NSWCCD. The simulations are two-phase, three-dimensional, and unsteady. Each required 1.15 billion grid cells and 200,000 CPU hours to accurately resolve the unsteady flow and obtain a sufficient statistical ensemble size. Two speeds, 7 and 8 knots, are compared. The 7 knots (Fr=Uo /&surd;gLo=0.38) case is a partially wetted transom condition and the 8 knots (Fr=0.43) case is a dry transom condition. The results of a detailed comparison of the mean free surface elevation, surface roughness (RMS), and spectra of the breaking stern-waves, measured by Light Detection And Ranging (LiDAR) and Quantitative Visualization (QViz) sensors, are presented. All of the comparisons showed excellent agreement. The concept of height-function processing is introduced, and the application of this type of processing to the simulation data shows a k-5/3 power law be...

... All rights reserved. Permissions & Reprints. Vortex structures and kinetic energy budget in two-dimensional flow past a square cylinder. AK Saha, K. Muralidhar and G. Biswas Corresponding Author Contact Information , E-mail The Corresponding Author. ...

Aiming at the control of natural convection flows and heat transfer in air-filled differentially-heated cavities, experimental attempts were carried out in order to achieve the stability of such flows to various excitations. The mechanism of control chosen in these experiments introduces thermal disturbances via a thin pipe located inside the boundary layer at the bottom of the hot wall. Its

The Irrigation Training and Research Center (ITRC) at Cal Poly in San Luis Obispo, California has been working in conjunction with the Patterson Irrigation District (PID) on modernization of the district facilities. This project is being partially funded by the United States Bureau of Reclamation (USBR) Mid-Pacific Region. The district is located in the San Joaquin Valley of California. Water

When modelling and simulating complex systems, one often needs to use specific models for each com- ponent to take into account their behavior. This is the case, for instance, for the modelling of the coolant flow in a Pressurized Water Reactor. In the frame of the NEPTUNE project, it is clear that to obtain a complete and coherent description of

Current artificial heart valves either have limited lifespan or require the recipient to be on permanent anticoagulation therapy. In this paper, effort is made to assess a newly developed bileaflet valve prosthesis made of synthetic flexible leaflet materials, whose geometry and material properties are based on those of the native mitral valve, with a view to providing superior options for mitral valve replacement. Computational analysis is employed to evaluate the geometric and material design of the valve, by investigation of its mechanical behaviour and unsteady flow characteristics. The immersed boundary (IB) method is used for the dynamic modelling of the large deformation of the valve leaflets and the fluid-structure interactions. The IB simulation is first validated for the aortic prosthesis subjected to a hydrostatic loading. The predicted displacement fields by IB are compared with those obtained using ANSYS, as well as with experimental measurements. Good quantitative agre...

The visualization of unsteady flows is an attractive field of research and texture-based techniques seem to pro- vide satisfactory results. In this paper we propose a texture-based method which follows streaklines in order to produce an effective visualization of time-dependent phenomena. Our approach allows to overcome the lack of temporal coherence due to instantaneous methods which depict each frame of

Abstract: The fluid dynamics video shows rigid, spatially asymmetric bodies interacting with oscillating background flows. A free rigid object, here a hollow "pyramid," can hover quite stably against gravity in the oscillating airflow with a zero mean, when its peak speed is sufficiently high. ...

Shock–particle interaction is an important phenomenon. The interaction can be accurately resolved by direct numerical simulations. However, as the length scales of interest are much larger than the particle size in many applications, fully resolving the flow around the particle is impractical. Therefore, rigorous model for momentum and energy exchange in the interaction is very important. Shock–particle interaction is strongly time-dependent, so unsteady mechanisms play important roles in momentum and energy transfer. A model that includes unsteady contributions to force and heating is proposed. The model is used to investigate particle interactions with a planar shock wave and a spherical shock wave. The peak values and the net effects of unsteady contributions are used to measure their importance. The results show the peak values of unsteady contributions are much larger than the quasi-steady ones for a wide range of particle parameters. The net effects of unsteady contributions are important when the particle-to-gas density ratio is small. For the flow behind the spherical shock is unsteady and non-uniform, unsteady contributions have long-time influence on the particle evolution.

The accurate simulation of pressure transients in pipelines and pipe networks is becoming increasingly important in water engineering. Applications such as inverse transient analysis for condition assessment, leak detection, and pipe roughness calibration require accurate modeling of transients for longer simulation periods that, in many situations, requires improved modeling of unsteady frictional behavior. In addition, the numerical algorithm used for unsteady friction should be highly efficient, as inverse analysis requires the transient model to be run many times. A popular model of unsteady friction that is applicable to a short-duration transient event type is the weighting function-based type, as first derived by Zielke in 1968. Approximation of the weighting function with a sum of exponential terms allows for a considerable increase in computation speed using recursive algorithms. A neglected topic in the application of such models is evaluation of numerical error. This paper presents a discussion and quantification of the numerical errors that occur when using weighting function-based models for the simulation of unsteady friction in pipe transients. Comparisons of numerical error arising from approximations are made in the Fourier domain where exact solutions can be determined. Additionally, the relative importance of error in unsteady friction modeling and unsteady friction itself in the context of general simulation is discussed.