Kamile Nazan Turhan
Kamile Nazan Turhan
Kamile Nazan Turhan
13
Review paper
UDC 579.67
CELLULOSE BASED PACKAGING FILMS CONTAINING NATURAL
ANTIMICROBIAL AGENTS
Kamile Nazan Turhan
1*
1
Department of Food Engineering, Faculty of Agricultural Technology and Food Science, Izmir
University of Economics, Sakarya Cad. No. 156, Balova, 35330 zmir, Turkey
*
e-mail: nazan.turhan@ieu.edu.tr
Abstract
Microbial growth on the product surface is the main
cause of spoilage of many foods. The application of
antimicrobial agents to packaging can create an en-
vironment inside the package that may delay or even
prevent the growth of microorganisms on the product
surface. Hence, it leads to an extension of the shelf life
and the improved safety of the product.
In this technology, natural or chemical antimicrobial
agents incorporate into the packaging polymers are
used to produce antimicrobial materials. Biodegradable
packaging materials, made from entirely renewable
natural polymers, could contribute to solving environ-
mental pollution and creating new markets for agri-
cultural products. On the other hand, the natural anti-
microbial agent incorporation into renewable natural
polymers for the development of antimicrobial food
packaging materials is a new subject.
This study reviews eficiency of several natural anti-
microbial agents against undesirable microorganisms
in foods and their usage in cellulose-based packaging
materials.
Key words: Antimicrobial films/coatings, Biodegradable
material, Cellulose derivatives, Natural antimicrobial
agents.
1. Introduction
Microbial growth on the product surface is the main
cause of spoilage of many foods. To control undesirab-
le microorganisms in foods during storage, antimicro-
bial substances can either be coated on food surface
or incorporated into the food packaging materials.
Antimicrobial packaging is one of active packaging
concepts that is an innovative way of inhibiting mic-
robial growth on the foods while maintaining quality,
freshness, and safety. It is also an alternative techno-
logy to non-thermal process which do not prevent
growth of heat-resistant microorganisms and their spo-
res. As antimicrobial packaging films are used for surfa-
ce preservation, antimicrobial containers and utensils
are used for liquid foods [1, 2].
Antimicrobial packaging is gaining interest from rese-
archers and industries due to its potential to provide
quality and safety benefits. The reason for incorpora-
ting antimicrobial agents into packaging materials is
to prevent surface growth of microorganisms in foods
where a large portion of spoilage and contamination
occurs. This approach can reduce the addition of larger
quantities of antimicrobials that are usually incorpora-
ted into the bulk of the food. A controlled release from
packaging film to the food surface has numerous ad-
vantages over dipping and spraying [2 - 4].
In this technology, natural or chemical antimicrobial
agents incorporated into the packaging system/pol-
ymer or antimicrobial polymers are used to produce
antimicrobial packaging materials. Packaging material
having antimicrobial activity limits or prevents micro-
bial growth by reducing growth rate or extending lag
phase of microorganisms. Hence, it leads to an extensi-
on of the shelf life and the improved safety of the pro-
duct. Because of the increase in consumer demand for
minimally processed, preservative-free products, the
preservative agents must be applied to packaging in
such a way that only low levels of preservatives come
into contact with the food or natural preservative ma-
terials should be used. In order to meet this demand,
the film or coating technique is considered to be more
efective for applications [2, 3]. The natural antimicrobi-
al agent incorporation into a polymeric material for the
development of antimicrobial food packaging materi-
als is a new subject. Natural antimicrobial agents such
as spice volatile oils (thyme, rosemary, black pepper,
sage, garlic etc.), plant extracts (olive leaf extract, gra-
pe seed extract etc.), organic acids (acetic, citric, lactic
acids etc.), bacteriocins (nisin, lisozim, colisin, pediocin
etc.) are used to produce antimicrobial packaging ma-
terials [1 - 3].
Journal of Hygienic Engineering and Design
14
2. Biodegradable antimicrobial packaging
Synthetic polymers are widely used as packaging mate-
rials, because of their excellent mechanical properties,
low permeability values and low cost, but they cause
a big environmental disposal problem. For this reason,
there has been an increasing interest on developing
packaging materials alternative to synthetics with not
only mechanical and permeability properties but also
economical fabrication.
Biodegradable packaging, made from entirely re-
newable natural polymers, could contribute to solving
environmental pollution and creating new markets for
agricultural products. Environmental problems can
thus result from using non-renewable raw materials
and accumulation of such non-biodegradable packa-
ging. One solution is use of biodegradable materials
made from polysaccharides, proteins, lipids, polyes-
ters or a combination of these. Moreover, some addi-
tives such as colorants, antioxidants and antimicrobial
agents can provide to packaging materials some func-
tional properties to prevent or delay microbial or che-
mical spoilage of food products.
The marketing of environmentally friendly packaging
that uses biodegradable materials has the greatest po-
tential in countries where landfill is the main waste ma-
nagement tool. The packaging field is still dominated
by petroleum-derived polymers, such as polyethylene
and polystyrene, despite global concerns about the
environment. This is indicative of problems associated
with the performance, processing, and overall cost,
which remains a challenge when dealing with these
renewable materials. In this content biopolymer-based
packaging materials that include both edible films and
coatings, along with primary and secondary packaging
materials, have been reviewed [1 - 4].
Antimicrobial packaging may be an efective way of food
preservation, but there are some critical concerns. First
of all, antimicrobial agents may be incorporated into the
packaging materials initially or coated or immobilized
on the surface of packaging material and migrate into
through the food difusion and partitioning for it to be
efective. Thus, this antimicrobial agent must be consi-
dered as a food additive and it should correspond to the
regulatory concerns. Moreover, as much as antimicrobial
eficiency, the cost-to-benefit ratio is an important con-
cern. Some antimicrobial systems can be efective, but
if produced on a large scale, they might require expen-
ses beyond the benefits. And at last, there are numerous
technical challenges related to coating methods, the
efects on physical and mechanical properties of film,
the efects on color, the texture or favor of the food, and
the ability of the antimicrobial agent to provide efec-
tiveness throughout the package/product life cycle. As
researches in this area progress, there is a promise to de-
velop many new systems to meet these challenges [5].
2.1. Cellulose for biodegradable films/coatings
Biodegradable packaging is defined as packaging that
contains raw materials originating from agricultural
and marine sources. There are three such categories of
biopolymers: (a) produced by chemical synthesis from
bioderived monomers; (b) produced by microorganis-
ms; (c) extracted directly from natural raw materials,
such as cellulose [1].
Cellulose is one of the most abundant biopolymers
on earth, occurring in wood, cotton, hemp and other
plant-based materials and serving as the dominant re-
inforcing phase in plant structures. It is one of the most
plentiful renewable resources. As a consequence of its
chemical structure, it is highly crystalline, fibrous, and
insoluble. Cellulose based edible films are very good
barriers to aroma, oxygen and oil transfer like other
hydrophilic films. Several water-soluble, composite
coatings are made commercially from cellulose, car-
boxymethylcellulose with sucrose-fatty acid esters.
Derivatives of cellulose, such as methylcellulose and
hydroxypropyl methylcellulose, form strong and fexib-
le water-soluble films. The barrier and mechanical pro-
perties of cellulose based edible films have been repor-
ted in the literature, with these films also lower in water
vapour permeability compared to other hydrophilic
edible films [3, 4].
2.2. Natural antimicrobial agents using in cellulo-
se-based films
The natural antimicrobial agent incorporation into a
polymeric material for the development of antimicro-
bial food packaging materials is a new subject. Natural
antimicrobial agents such as spice volatile oils (thyme,
rosemary, black pepper, sage, garlic etc.), plant extra-
cts (olive leaf extract, grape seed extract etc.), organic
acids (acetic, citric, lactic acids etc.), bacteriocins (nisin,
lisozim, colisin, pediocin etc.) are used to produce an-
timicrobial packaging materials. The use of biodegra-
dable polymers (cellulose derivatives, starch, pectin,
etc.) may ofer a good way for carrying a natural anti-
microbial agent.
Antimicrobial agents incorporation into polymers may
be a more suitable method for heat-sensitive antimicro-
bials like enzymes and volatile compounds. Lysozyme
for example, has been incorporated into cellulose ester
films by solvent compounding in order to prevent heat
denaturation of the enzyme. Although bacteriocins
and peptides are relatively heat-resistant, their antimic-
robial activity may be higher when heat is not used in
the process. Studies on nisin show that the activity of
the bacteriocin in cast films is three times greater than
that of heat-pressed films. The films were made from
methylcellulose, hydroxypropyl methylcellulose, carra-
geenan and chitosan [3].
Chen et al. [6] developed antimicrobial methylcellulose
films containing chitosan as well as sodium benzoate
Journal of Hygienic Engineering and Design
15
or potassium sorbate and investigated the efect of
the films on Penicillium notatum and Rhodotomla nibra.
The methylcellulose films containing 2% preservatives
yielded clear zone at the film/medium interface as well
as the area around the disc. However, the chitosan film
containing 2 % of preservative did not result in a clear
inhibitory zone around the film disc. The complex film
comprising of methylcellulose and chitosan, contai-
ning 4% preservatives, could release the antimicrobial
agents and form clear inhibitory zone during incuba-
tion.
Ghosh et al. [7] developed fungistatic wrappers with
sorbic acid and applied them to bread. This wrapper
necessitated heating the wrapped bread at 95 - 100
0
C
for a period of 30 to 60 min. The incorporation of an
antioxidant in the treated wrapper and also the use of
an odor adsorbent inside the bread packs minimized
of-favor development. Sliced bread, based on sensory
evaluation, was found acceptable up to 1 month and
as a sandwich, up to 3 months. The fungistatic wrap-
pers were made by coating grease-proof paper with an
aqueous dispersion of sorbic acid in 2% carboxymet-
hylcellulose solution. Using this sorbic acid-treated pa-
per and then enclosing the food in a polyethylene bag
could preserve foods that are generally amenable to
spoilage by mold for minimum of 10days.
Coma [8] obtained antimicrobial activity of edible cel-
lulosic films made with hydroxypropyl methylcellulose
(HPMC) by the incorporation of nisin into the film-for-
ming solution. The inhibitory activity of nicin was tes-
ted for inhibition of Listeria innocua and Staphylococcus
aureus. The use of stearic acid was observed to reduce
the inhibitory activity of active HPMC film against both
selected strains. This phenomenon may be explained
by electrostatic interactions between the cationic nisin
and the anionic stearic acid.
Several studies have shown that the use of natural-
ly derived antimicrobial agents in packaging systems
for milk products, meat and meat products, fruits, ve-
getables etc. extends shelf life and maintain product
quality (Table 1). Applications of cellulose based films
containing natamycin to gorgonzola cheese, methy-
lcellulose based films containing olive leaf extract to
kashar cheese, cellulose based films containing nisin,
natamycin to mozzarella cheese, lemongrass, oregano
oil and vanillin incorporated in apple puree-alginate
edible coatings to fresh-cut Fuji apples, methylcellulo-
se-based coatings incorporated with chitosan to melon
have retarded the growth rate of microorganisms whi-
ch cause food spoilage [1 - 5].
Zhuang et al. [9] investigated the efect of hydroxy-
propyl methylcellulose (HPMC) coatings with ethanol
to mature-green tomatoes on the survival of Salmonella
montevideo on the surface and in core tissue. HPMC
coating significantly (P 0.05) reduced the number of
viable S. montevideo cells on the surface of tomatoes.
However, only about a 2 log unit reduction was achie-
ved in core tissue. The addition of citric acid, acetic acid,
or sorbic acid to HPMC did not substantially enhance
bactericidal activity. Application of HPMC coating also
retarded the rate of loss of firmness and change in color
of tomatoes stored at 20
0
C for up to 18 days.
Heat resistant Pediococcus-derived bacteriocins inhi-
bit or kill Listeria monocytogenes on contact with food.
Ming et al. [10] applied nisin and pediocin to cellulo-
se casings to reduce L. monocytogenes in meats and
poultry. Pediocin-coated bags completely inhibited
the growth of inoculated L. monocytogenes through 12
weeks storage at 4
0
C. Patents taken in this regard are
also available. One of them (US Patent 5,573,797) is a
patent for the method of employing pediocin-coated
cellulose casings on meat for inhibiting the growth of
L. monocytogenes [1, 11].
Soares et al. [12] developed cellulose acetate films with
sodium propionate to reduce mould growth during
Table 1. Applications of some antimicrobial packaging
materials to food spoilage microorganisms
Polymer
Antimicrobial
agent
Food Microorganism Reference
HPMC*
Citric / Sorbic
acid
Green
tomatoes
Salmonella
montevideo
[9]
Cellulose Pediocin
Ham, turkey
breast meat
and beef
Listeria
monocytogenes
[10]
Cellulose
acetate
Sodium
propionate
Bread Bread mold [12]
Cellophane Nisin
Fresh veal
meat
Total aerobic
bacteria
[13]
Cellulose Nisin
Cheddar
cheese
Ham
Staphylococcus
aureus
Listeria innocua
[14]
Cellulose Natamycin
Gorgonzola
cheese
Penicillium
roqueforti
[15]
Cellulose Nisin Sausage
Listeria
monocytogenes
[16]
Methylce-
llulose
Olive leaf
extract
Kashar
cheese
Staphylococcus
aureus
[17]
HPMC
Organic acid
salts
Mandarin
Penicillium
digitatum,
Penicillium
italicum
[18]
HPMC Propolis Grape
Total mesophilic
microorganisms,
yeast, mold
[19]
Methylce-
llulose
Propolis
Kashar
cheese
Staphylococcus
aureus
[20]
HPMC*: Hydroxypropyl methylcellulose,
Journal of Hygienic Engineering and Design
16
bread storage. The microbiological analyses showed
that increased propionate concentration into the film
decreased mould growth during storage period.
Nisin-adsorbed bioactive cellophane was applied to
chopped meat under refrigeration temperatures. To as-
sess the shelf life implications of incorporating bioacti-
ve inserts in the packaging of fresh veal meat, total ae-
robic bacteria counts were determined. The developed
bioactive cellophane reduced significantly the growth
of the total aerobic bacteria through 12 days of storage
at 4
0
C [13].
Olive leaf extract (OLE) is known with its high antioxidant,
antimicrobial and antibacterial activity. Antimicrobial
eficiency of phenolics extracted from olive, olive oil
and olive leaf against some food pathogens, namely
Staphylococcus aureus, Escherichia coli, Salmonella typ-
himurium, Salmonella enteritidis, Listeria monocytogenes
have been studied in the literature [21]. The first study on
the OLE incorporated antimicrobial packaging materials
and application of it performed by Ayana and Turhan in
2009. In the first part of the study, they prepared olive
leaf extract (OLE) incorporated antimicrobial methylcel-
lulose films and investigated OLE concentration on the
film properties (water vapor permeability and mechani-
cal properties) and the antimicrobial eficiency of these
films against S. aureus. In the second part of the study,
they applied the OLE incorporated methylcellulose films
on the S. aureus inoculated kasar cheese and investiga-
ted the inhibition eficiency of the films. They reported
that the S. aureus numbers decreased 1.22 log cycle for
the slices wrapped with OLE incorporated methylcel-
lulose films after 14 day of storage. On the other hand
S. aureus count increased 0.64 and 0.60 log cycle at the
end of the storage for non-wrapped and methylcellulose
film wrapped slices, respectively [17]. A similar study was
performed by Scannel at al. [14] who immobilized nisin
to cellulose-based pouches. Nisin-adsorbed bioactive
inserts reduced levels of Listeria innocua by 2 log units
in both products, and S.aureus by 1.5 log units in cheese,
and 2.8 log units in ham in in modified atmosphere pac-
kaging at refrigeration temperatures. Similar reductions
were observed in cheese vacuum-packaged in nisin-ad-
sorbed pouches [16].
In another study, antimicrobial eficiency of OLE in-
corporated polylactic acid (PLA) and methylcellulo-
se-PLA films were investigated against S. aureus [22]. It
was reported that the methylcellulose-PLA films were
much successive inhibiting S. aureus than the PLA fil-
ms at all OLE concentrations. It was suggested that the
incorporation of hydrophilic methylcellulose into the
hydrophobic PLA matrix probably made easy the relea-
se of the OLE to the hydrophilic agar medium.
Antimicrobial methylcellulose films containing propo-
lis extract (0 - 6%, w/v) as an antimicrobial agent were
produced by Erol [20]. The efect of the amount of pro-
polis extract on the water vapour permeability, the me-
chanical and the antimicrobial properties of the methyl
cellulose based films were investigated. As the con-
centration of extract increased in methylcellulose films,
the water vapour permeability and percent elongati-
on decreased whereas the tensile strength increased.
The methylcellulose films containing propolis extract
(4,5%, w/v) were applied onto the salami slices inocula-
ted with S. aureus. The level of S. aureus decreased 0,78
log at the end of the 14th days.
The eficiency of cellulose based packaging materials
containing certain antimicrobial agents like nisin, oli-
ve leaf extract, propolis, organic acids and others have
been widely investigated (Table 1). These studies un-
derline that a proper polymer with an antimicrobial
may ofer efective food preservation. However, appli-
cation of plant extracts or essential oils on a foodstuf
or a packaging material may not always refect the re-
sults obtained from preliminary in vitro studies of the
same compounds. The inhibitory efect of an antimic-
robial agent in an antimicrobial package is related with
release from the polymer matrix. Foods are complex
systems consisting of diferent connected microenvi-
ronments and the antimicrobial additive should relea-
se enough from the polymer matrix to show inhibitory
efect [2]. Thus, having an inhibition efect against cer-
tain group of bacteria of an antimicrobial agent is not
suficient alone; selection of an appropriate polymer
should be taken account when developing antimicro-
bial packaging materials.
3. Conclusions
- Although there has been a rising interest in the re-
searches in this field, availability of natural antimic-
robials and new biodegradable polymer materials,
regulatory concerns, and appropriate testing met-
hods limit the developments.
- Antimicrobial packaging is highly regulated around
the world and researchers must take these regula-
tions into consideration. First of all, the component
showing the antimicrobial efect must considered
as a food additive and must meet the food additive
standards.
- In recent years, studies on usage of antimicrobial
plant extracts have gained acceleration since these
are generally classified as GRAS (generally recogni-
zed as safe).
- The use of biodegradable films for food packaging
has been strongly limited because of the poor bar-
rier properties and weak mechanical properties
shown by natural polymers. For this reason, further
studies are necessary to improve the barrier proper-
ties of natural polymers.
Journal of Hygienic Engineering and Design
17
4. References
[1] Cha D. S., and Chinnan M. S. (2004). Biopolymer-based an-
timicrobial packaging: A review. Critical Reviews in Food
Science and Nutrition 44, pp. 223 - 237.
[2] Han J. H. (2000). Antimicrobial food packaging. Food
Technology, 54 (3), pp. 56 - 65.
[3] Appendini P., and Hotchkiss J. H. (2002). Review of anti-
microbial food packaging. Innovative Food Science and
Emerging Technologies, 3 (2), pp. 113 - 126.
[4] Vermeiren L., Devlieghere F., and Debevere J. (2002).
Efectiveness of some recent antimicrobial packaging con-
cepts. Food Additives and Contaminants, 19, pp. 163 -
171.
[5] Cooksey K. (2005). Efectiveness of antimicrobial food pa-
ckaging materials. Food Additives and Contaminants, 22
(10), pp. 980 - 987.
[6] Chen M. C., Yeh G. H. C., and Chiang B. H. (1996).
Antimicrobial and physicochemical properties of methy-
lcellulose and chitosan films containing a preservative.
Journal of Food Processing and Preservation, 20, pp.
379 - 390.
[7] Ghosh K. G., Srivatsava A. N., Nirmala N., and Sharma T. R.
(1997). Development and application of fungistatic wrap-
pers in food preservation. Part II. Wrappers made by coa-
ting process. Journal of Food Science and Technology,
14, pp. 261 - 264.
[8] Coma V., Sebti I., Pardon P., Deschamps A., and Pichavant
F. H. (2001). Antimicrobial edible packaging based on cel-
lulosic ethers, fatty acids, and nisin incorporation to inhibit
Listeria innocua and Staphylococcus aureus. Journal of
Food Protection, 64 (4), pp. 470 - 475.
[9] Zhuang R., Beuchat L. R., Chinnan M. S., Shewfelt R. L.,
and Huang Y. W. (1996). Inactivation of Salmonella mon-
tevideo on tomatoes by applying cellulose-based films.
Journal of Food Protection, 59 (8), pp. 808 - 812.
[10] Ming X., Weber G. H., Ayres J. W., and Sandine W. E.
(1997). Bacteriocins applied to food packaging materials
to inhibit Listeria monocytogenes on meats. Journal of
Food Science, 62 (2), pp. 413 - 415.
[11] Quintavalla S., and Vicini L. (2002). Antimicrobial food pa-
ckaging in meat industry. Meat Science, 62, pp. 373 - 380.
[12] Soares N. F. F., Rutishauser D. M., Melo N., Cruz R. S., and
Andrade N. J. (2002). Inhibition of microbial growth in
bread through active packaging. Packaging Technology
and Science, 15, pp. 129 - 132.
[13] Guerra N. P., Macias C. L., Agrasar A. T., and Castro L. P.
(2005). Development of a bioactive packaging cellopha-
ne using Nisaplin as biopreservative agent. Letters in
Applied Microbiology, 40, pp. 106 - 110.
[14] Scannell A. G. M., Hill C., Ross R. P., Marx S., Hartmeier
W., and Arendt E. K. (2000). Development of bioactive
food packaging materials using immobilised bacterio-
cins Lacticin 3147 and Nisaplin. International Journal of
Food Microbiology, 60, pp. 241 - 249.
[15] Oliveira T. M., Soares N. F. F., Pereira R. M., and Fraga K.
F. (2007). Development and evaluation of antimicrobial
natamycin-incorporated film in Gorgonzola cheese con-
servation. Packaging Technology and Science, 20, pp.
147 - 153.
[16] Nguyen V. T., Gidley M. J., and Dykes G. A. (2008).
Potential of a nisin-containing bacterial cellulose film to
inhibit Listeria monocytogenes on processed meats. Food
Microbiology, 25, 471- 478.
[17] Ayana, B. and Turhan, K.N. (2009). Use of antimicrobial
methylcellulose films to control Staphylococcus aureus du-
ring storage of kasar cheese. Packaging Technology and
Science, 22, pp. 461 - 469.
[18] Valencia-Chamorro S. A., Perez-Gago M. B., Del Rio M. A.,
Palou L. (2010). Efect of antifungal hydroxypropyl methy-
lcellulose-lipid edible composite coatings on Penicillium
decay development and postharvest quality of cold-stored
Ortanique mardarins. Journal of Food Science, 75 (8),
418 - 426.
[19] Pastor C., Sanchez-Gonzalez L., Marcilla A., Chiralt A.,
Chafer M., and Gonzalez-Mertinez C. (2011). Quality
and safety of table grapes coated with hydroxypropylmet-
hylcellulose edible coatings containing propolis extract.
Postharvest Biology and Technology, 60, pp. 64 - 70.
[20] Erol E. (2012). Production of biodegradable films contai-
ning natural antimicrobials. M.Sci. thesis, University of
Mersin, Mersin, Turkey.
[21] Erdohan Z. O., and Turhan K. N. (2011). Olive leaf ext-
ract and usage for development of antimicrobial food
packaging. In: A. Mendez-Vilas (ed.), Science Against
Microbial Pathogens: Communicating Current Research
and Technological Advances. Microbiology Book Series,
Formatex Research Center, Number 3, pp. 1094 - 1101.
[22] Turhan K. N. (2009). Production and characterization of
antimicrobial polylactic acid and methylcellulose-polyla-
ctic acid films. The Scientific and Technological Research
Council of Turkey, Turkey. Project No: 107O234.