Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
37 views

Operational Measured Values: - To Check The Operational Measured Values It

The document outlines steps to check operational measured values of a relay by injecting symmetrical 3-phase current and voltage signals with varying amplitudes. Current signals of IA = 0.5Inom, IB = 0.4Inom, and IC = 0.3Inom at 120 degree phases are injected, along with voltage signals of UAN = 0.5Unom, UBN = 0.4Unom, and UCN = 0.3Unom at 120 degree phases. The relay may pick up or alarm due to protection settings but readings can still be taken, with actual measurement values readable via DIGSI or the relay display.

Uploaded by

Mohamed Wahid
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
37 views

Operational Measured Values: - To Check The Operational Measured Values It

The document outlines steps to check operational measured values of a relay by injecting symmetrical 3-phase current and voltage signals with varying amplitudes. Current signals of IA = 0.5Inom, IB = 0.4Inom, and IC = 0.3Inom at 120 degree phases are injected, along with voltage signals of UAN = 0.5Unom, UBN = 0.4Unom, and UCN = 0.3Unom at 120 degree phases. The relay may pick up or alarm due to protection settings but readings can still be taken, with actual measurement values readable via DIGSI or the relay display.

Uploaded by

Mohamed Wahid
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Operational Measured Values: To check the operational measured values it

is necessary to inject a 3phase symmetrical current and voltage system (but with
different amplitudes) Inject current amplitudes of IA = 0.5Inom, IB = 0.4Inom,
IC = 0.3Inom (with balanced angles of 120) Inject voltage amplitudes of UAN
= 0.5Unom, UBN = 0.4Unom, UCN = 0.3Unom (with balanced angles of 120)
Depending on the protection / supervision settings the relay might pick up or
give an Alarm, but this does not affect the test (readings are possible to take)
The actual measurement values can be read via DIGSI or the relay display.

You might also like