TANKS

AVERAGE PROPERTIES OF PROPANE Formula Boiling Point, F Specific Gravity of Gas (Air = 1.00) Specific Gravity of Liquid (Water = 1.00) Lbs. per Gallon of Liquid at 60F BTU per Gallon of Gas at 60F BTU per Lb. of Gas BTU per Cu.Ft. of Gas at 60 Cu. Ft. of Vapor at 60F/Gal. of Liquid at 60F Cu. Ft. of Vapor at 60F/Lb.of Liquid at 60F Latent Heat of Vaporzation at Boiling Point BTU/Gal. Combustion Data: Cu.Ft. Air Required to Burn 1 Cu. Ft. Gas Ignition Temperature in Air, F Maximum Flame Temperature in Air, F Limits of Imflammability, Percentage of Gas in Air Mixture: at Lower Limit % at Upper Limit % Octane Number (ISO - Octane = 100) C3H8 -44 1.50 0.51 4.24 91547 21591 2516 36.39 8.547 785.0 23.86 920 to 1120 3595

APPROXIMATE VAPORZATION CAPACITIES OF TRINITY PROPANE TANKS BTU PER HOUR WITH 40% LIQUID IN TANK DOMESTIC SYSTEMS Prevailing Air Temperature Tank Size 20F 60F Water Capacity 120 250 325 500 1,000 2,000 6,000 8,000 10,000 12,000 15,000 18,000 20,000 30,000 290,304 406,080 514,100 634,032 1,088,472 2,128,897 4,262,400 5,060,000 6,230,400 7,400,000 8,080,000 8,500,000 9,500,000 11,800,000 516,096 721,920 937,900 1,127,168 1,978,051 4,257,795 6,393,600 7,590,000 9,345,600 11,100,000 12,120,000 12,750,000 14,250,000 17,700,000

CONVERTING VOLUMES OF GAS (CFH TO CFH OR CFM TO CFM) Multiply Flow of: Air By 0.707 1.290 0.808 1.414 1.826 1.140 0.775 0.547 0.625 1.237 0.874 1.598 To Obtain Flow of: Butane Natural Gas Propane Air Natual Gas Propane Air Butane Propane Air Butane Natural Gas

Butane

Natural Gas

Propane

2.15 9.6 Over 100 CONVERSION UNITS

VAPOR PRESSURE OF PROPANE TEMP. PRES. TEMP. PRES. TEMP. PRES. TEMP. PRES.
110F 220 psig 60F 102 psig 20F 100F 196 psig 50F 90F 165 psig 40F 80F 140 psig 30F 86 psig 10F 72 psig 0F 47 psig -20F 13.5 psig 37 psig -30F 8 psig 0 psig 28 psig -40F 3.6 psig

58 psig -10F 23.3 psig -44F

Multiply Volume Cubic centimeter Cubic feet Cubic feet Cubic feet Gallons (US) Gallons (US) Gallons (US) Liters Liters Miscellaneous BTU Decitherm Kilogram Kilowatt Hour Ounces Pounds Pounds Pounds Therm API Bbls Gallons of Propane HP HP (Steam) Pressure Grams per sq. cm Inches of mercury

By 0.06103 0.0275 28.316 1728 36.39 3.785 231 1.057 2.113 0.252 10,000 2.205 3412 28.35 0.4536 453.5924 21,591 100,000 42 26.9 746 42,418 0.0142 0.4912

To Obtain cubic inches gallons (US) liters cubic inches cubic feet liters cubic inches quarts pints calories BTU pounds BTU grams kilograms grams LPG BTU BTU gallons (US) KWH KWH BTU pounds per sq. in. pounds per sq. in.

Multiply Pressure continued Inches of mercury Inches of water Inches of water Inches of water Inches of wter KPA Kilograms per sq. cm Kilograms per sq. m Pounds per sq.in. Pounds per sq.in. Pounds per sq.in. Pounds per sq. in. Pounds per sq. in. Pounds per sq.in. Pounds per sq.in. Length Centimeters Feet Feet Kilometer Meters Meters Meters Miles (nautical) Miles (statute Yards Yards

By 1.133 0.0361 0.0735 0.5781 5.204 100 14.22 0.2048 0.07031 0.06804 6.89 2.036 2.307 0.6897 27.67 0.3937 0.3048 304.8 0.6214 1.094 3.281 39.37 1,853.0 1,609.0 0.9144 91.44

To Obtain feet of water pounds per sq. in. inches of mercury ounces per sq. in. pounds per sq. ft. BAR pounds per sq. in. pounds per sq. ft. kg per sq. cm atmospheres KPA inches of mercury feet of water BAR inches of water inches centimeters millimeters miles yards feet inches meters meters meters centimeters

70F 127 psig

BTU COMPARISON Common Fuels

Propane Butane Gasoline Fuel Oil

Per Gal.
91,547 102,032 110,250 134,425

Per Lb.
21,591 21,221 20,930 16,960

TEMPERATURE CONVERSION Degrees F -50 -40 -30 -20 -10 0 +10 20 30 32 40 50 Degrees C -46 -40 -34 -29 -23 -17.8 -12.2 -6.7 -1.1 0 +4.4 10.0 Degrees F Degrees C 60 70 80 90 100 110 120 130 140 150 160 170 15.6 21.1 26.7 32.2 37.8 43 49 54 60 66 71 77

FORMULA: Degrees C = (F - 32) x 5/9 Degrees F = 9/5 x C + 32

New Jersey 800-922-0724

New Hampshire 800-895-8265

Pennsylvania 888-972-6323

Virginia 866-828-2657

North Carolina 910-829-4980

Florida 866-837-1810

63

TANKS

TANKS

M ANCHESTER P ORTABLE DOT V ERTICAL S TEEL C YLINDERS

5, 10, and 11 Pound Portable Cylinders

OL H

OL H

OL

B B D 10054 DESCRIPTION 5LB Vertical ACME/Type 1 with OPD 10LB Vertical ACME/Type 1 with OPD 11LB Vertical ACME/Type 1 with OPD B D 10228.4 PART NUMBER 10054 10228.4 10393.1 OL 12 17.43 12.38 H 8.62 13.75 8.37 D 8 8.87 12.16 D 10393.1 TW 9.5 14 13 WC 13 26.1 25.4 B 6.5 7.25 7.93

COMPOSITE C YLINDERS
Manufactured by the Lite Cylinder Company Approved by the DOT special permit #13957
Features: 50% Lighter than Steel Corrosive Free Stackable Constant Tare Weight Pre-purged

Translucent! Know How Much Gas is Left in Cylinder

Specifications: Size 20lb Diameter 12.4 O.L. 18" Net Propane 19lb T.W. 12.4lb Valve ACME/OPD Standard UL Listed Type 1
Part Number LC-20

TANKS

20lb Cylinder Specifications: Size 10lb Diameter 9.7 O.L. 17.3" Net Propane 10lb T.W. 11.5lb Valve ACME/OPD Standard UL Listed Type 1 Part Number LC-10

Ideal for Marine, Camping and Hunting

10lb Cylinder

64

Order on-line: www.tarantin.com

TANKS
Youll nd cylinder accessories on page 67.

M ANCHESTER P ORTABLE DOT V ERTICAL S TEEL C YLINDERS

OL

B D

Vertical 10504 10781.12

20 Pound Gas Grill and RV Cylinders

DESCRIPTION 20LB ACME/Type 1 with OPD 20LB ACME/Type 1, Gauge with OPD 20LB Telephone, ACME/Type 1 with OPD PART NUMBER 10504 10834TC.1 10781.2 OL 17.56 17.56 18.31 H 13.62 13.62 13.62 D 12.16 12.16 12.16 B 8 8 7.93 TW 18 19 20 WC 47.6 47.6 47.6

30 and 40 Pound Cylinders

DESCRIPTION 30LB ACME/Type 1 with OPD 30LB ACME/Type 1, Gauge with OPD 40LB ACME/Type 1 with OPD 40LB ACME/Type 1, Gauge with OPD 40LB Telephone, ACME/Type 1 with OPD 40LB ACME/Type 1 with OPD (Large Foot Ring) PART NUMBER 1160.8 1166.2 1220TC.4 1222TC.2 12781.2 1203TC.3 OL 23.43 23.43 29.43 29.43 31.06 29.43 H 19.56 19.56 25.56 25.56 25.56 25.56 D 12.16 12.16 12.16 12.16 12.16 12.16 B 7.93 7.93 7.93 7.93 12.16 12 TW 25.5 26.6 30.5 30.5 34 30.5 WC 71.4 71.4 95.2 95.2 95.2 95.2

Cylinders are manufactured to meet or exceed DOT Specication 4BA240 or 4BW240.

S UREFLAME C YLINDER
The Newest and Most Effective Gauge Available!
Features: Easy to Read Easy to Use

Dont Run Out of Gas Again

10577

New Jersey 800-922-0724

New Hampshire 800-895-8265

Pennsylvania 888-972-6323

Virginia 866-828-2657

North Carolina 910-829-4980

Florida 866-837-1810

65

TANKS

TANKS

M ANCHESTER P ORTABLE DOT V ERTICAL S TEEL C YLINDERS

50, 60 and 100 Pound Cylinders

OL

B D

Standard POL Valve CGA510 Connection

Footring Rust resistant mastic coating applied by dipping footring. Powder Coated

DESCRIPTION 50LB Outage, Collar Type with POL 60LB Outage, Collar Type with POL 100LB Outage, Collar Type with POL 100LB Multivalve, Collar Type with POL White 100LB Cyl Collar w/ liquid valve 100LB Cyl Collar w/ liquid multivalve

PART NUMBER 14861 1426 1428 1436.4 100SLM 100SLMM

C .50 1.06 .50 .50 .50 .50

OL 28.5 43.12 46.31 46.31 46.31 46.31

H 23.7 37.37 41 41 41 41

D 14.5 12.16 15.06 15.06 15.06 15.06

B 14 12.16 14 14 14 14

TW 46 46 70 71 71 238

WC 119 143 238 238 238 14

TANKS

1436.4 Vapor Multivalve POL Valve with 1 3/4" ACME Fill

100SLM Liquid Withdrawal Valve CGA555 Connection

100SLMM Liquid Withdrawal Multivalve CGA555 Connection with 1 3/4" ACME Fill

All cylinders on this page are manufactured to meet or exceed DOT Specication 4BW240.

66

Order on-line: www.tarantin.com

TANKS
Replacement OPD valves are on page 19 of the Valves Section.

TANK AND C YLINDER A CCESSORIES

For use on cylinders during transportation. Also protects valve on construction sites as per DOT and OSHA requirements.
PART NUMBER 1433
Screw On Cap 1433 Screw On Collar 1406.1 1406.2

DESCRIPTION Screw cap, 3 1/2" thread Screw on collar (construction) ts over multivalve, 3 1/2" Screw on collar (construction) ts over multivalve, 3 1/8"

1406.1 1406.2

LOCKS
The easy to install 510 Saf-T-Lok securely locks POL service valves to prevent unauthorized hookups, reduce pilferage, and secures tanks after out of gas calls. Provides an effective credit control.

PART NUMBER
510

DESCRIPTION POL-LOCK POL-LOCK KEY LOCK FOR POL FILL STATION HOSE END

510 510-K LOCK-FILL

LOCK-FILL

LOCKING C APS
Encloses ACME thread or handwheel on valve to prevent tampering.

B REAK - AWAY LOCKS

Hidden breakaway feature allows re department or emergency response personnel access to valves, plant gates, etc. Lock shackle breaks away when struck with a hammer or chisel.
PART NUMBER 500BRK DESCRIPTION Break-away Lock; Keyed Alike

PART NUMBER LC-1 LC-S4

INSIDE DIAMETER 2 1/4" 2 1/2"

BOTTOM OPENING 1 1/2" 1 3/8"

HEIGHT 1-1/8" 1"

VALVE TYPE FILLER 100LB

New Jersey 800-922-0724

New Hampshire 800-895-8265

Pennsylvania 888-972-6323

Virginia 866-828-2657

North Carolina 910-829-4980

Florida 866-837-1810

67

TANKS

TANKS

S PECIAL A PPLICATION C YLINDERS

Vertical Liquid Truck Cylinders
ORDER NUMBER 5305L 14LB LP WITH FILL (LIQUID SERVICE) 32.4 20.75 9.0 8.0 8.0 21.8 5306V 14LB LP (VAPOR SERVICE) 32.4 20.75 9.0 8.0 8.0 21.8 5549 100LB LP WITH FILL** 238 48.87 14.5 10.25 14.0 77.0

Water Capacity (lbs.) OAL Cyl. Diameter Guard Diameter Foot Ring Diameter Tare Weight, lbs.*
VAPOR OR LIQUID 14 LB 100 LB

* Tare weight may vary slightly on individual cylinder. ** Special order

Plumber Pot Steel Cylinders with OPD Valve

With large foot ring for improved stability! Meets and exceeds 4BA240 specications.
OVERALL HEIGHT 18 3/16 FOOT RING DIAMETER 12" WATER CAP. 47.6 TARE WEIGHT 20

MODEL NO. 10511-C

SIZE 20LB

DIAMETER 12.150

All plumber tanks come with Sherwood 3359 AS valve with 10% outage. Plumber pot furnaces, shield and accessories available.

M ANCHESTER DOT H ORIZONTAL C YLINDERS

20 and 30 Pound Steel Cylinders
DESCRIPTION 20LB ACME/Type 1, Gauge with OPD 30LB ACME/Type 1 with OPD and Gauge PART NUMBER 10487TC 1175TC OL H D TW 19.5 27.7 WC 47.6 71.4 B 7.93 7.93

17.37 13.62 12.16 23.43 19.56 12.16

TANKS

All cylinders on this page are manufactured to meet or exceed DOT Specication 4BA240 or 4BW240.

68

Order on-line: www.tarantin.com

TANKS

P ORTABLE DOT A LUMINUM C YLINDERS

6, 10, 20, 30 and 40 Pound Vertical Aluminum Cylinders

6 LB

10 LB

20 LB

30 LB

40 LB

DESCRIPTION 6LB Vertical ACME/Type 1 10LB Vertical ACME/Type 1 20LB Vertical ACME/Type 1 30LB Vertical ACME/Type 1 40LB Vertical ACME/Type 1

PART NUMBER 6ALVQOW 9058TC.2 9060TC.1 30ALVQOW 40ALVQOW

OL 22.06 16.25 20.06 26.65 32.06

H 15.56 10.75 15.1 21.15 26.56

D 6.26 10.28 12.125 12.125 12.125

TW 8 10.1 14.1 18 20.9

WC 15 23.8 47.6 71.5 95.2

10, 20, 30 and 40 Pound Horizontal Aluminum Cylinders

DESCRIPTION 10LB Horizontal with OPD 20LB Horizontal with OPD 30LB Horizontal with OPD 40LB Horizontal with OPD PART NUMBER 9059TC.l 9061TC.1 30ALHQOW 40ALHQOW OL 16.5 20.56 26.5 31.25 OH 11 13 13 12.5 WC 23.8 47.6 71.5 95.2

All cylinders on this page are manufactured to meet or exceed DOT Specication 4E240.

New Jersey 800-922-0724

New Hampshire 800-895-8265

Pennsylvania 888-972-6323

Virginia 866-828-2657

North Carolina 910-829-4980

Florida 866-837-1810

69

TANKS

TANKS

All cylinders on this page are manufactured to meet or exceed DOT Specication 4BW260 with the exception of 6ALW.

I NDUSTRIAL W ELDING C YLINDERS

For use with low pressure welding and cutting gases: Mapp, Propylene, Flamex and Apache. ALL VALVES POL (CGA 510) W/405PSI RELIEF
6 LB

OL No. 14738 Collar Style

22 1/2"

OL

No. 14739.3 Cap Style

Aluminum

B DIA

6 POUND CYLINDERS
PART NUMBER WC 6ALW 15.0 DIA 5.5 L 19.0 OAL 22.5 BR 6.5 WP 260 TW 8.0 PART NUMBER WC 14738 60.7 14739.3 60.7

25.5 POUND CYLINDERS*

DIA 9 9 H 29 29 OL 33.56 35.25 B 8 8 TW 60.7 60.7

DOT Specication 4E260

Caps sold separately. * Overall length on screw cap may vary depending on design or vendor.

OAL H No. 14733 Collar Style No. 14734 Cap Style OL H OAL No. 14735 Collar Style OL

No. 14736 Cap Style B DIA B DIA

TANKS

60 POUND CYLINDERS*
PART NUMBER WC 1477 143 14734 143 DIA 12.17 12.17 H 37.38 37.39 OL 43.12 44.75 B 12 12 TW 58 58 PART NUMBER 14735 14736 WC 238 238

100 POUND CYLINDERS*

DIA 14.5 14.5 H 43.69 43.69 OL 49 50.69 B 14 14 TW 72 72

Caps sold separately. * Overall length on screw cap may vary depending on design or vendor.

Caps sold separately. * Overall length on screw cap may vary depending on design or vendor.

70

Order on-line: www.tarantin.com

TANKS
Remember! All Manchester forklift tanks have a lifetime guarantee on the liquid tube.

M ANCHESTER S TEEL F ORKLIFT C YLINDERS

20 LB

33.5 LB

43.5 LB

5550 5570 5590

5572.13* 5572.12

5560 5580 5595

5 Hole Head Plugged Fill Code 13

PART NUMBER 5455 Buffer/Vapor 5456 Buffer/Vapor 5550 5560 5570 5572.12 5572.13* 5580 5590 5595 LP CAP 20LB 20LB 20LB 20LB 33.5LB 33.5LB 33.5LB 33.5LB 43.5LB 43.5LB OVER ALL LENGTH 19.13 19.13 19.13 19.13 27.25 27.25 27.25 27.25 33.25 33.25 CYL DIAM. 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19

4 Hole Head No Gauge

GUARD DIAM. 10.25 10.25 10.25 10.25 10.25 10.25 10.25 10.25 10.25 10.25 FOOTRING DIAM. 10.25 10.25 10.25 10.25 10.25 10.25 10.25 10.25 10.25 10.25 TARE WT (LBS) 27 27 27 27 36 36 36 36 43 43

5 Hole Head Fully Fitted Code 12

GAUGE Yes Yes Yes Yes Yes No No Yes Yes Yes ACME CONN Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes WATER ACME CAP (LBS) FAST FILL 47.6 No 47.6 Yes 47.6 No 47.6 Yes 80 No 80 Yes 80 No 80 Yes 104 No 104 Yes 10% OUTAGE Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

NOTE: We are the largest warehouse for forklift cylinders. We can stamp your name on the collar. * Has plugged ll opening.

All cylinders on this page are manufactured to meet or exceed DOT Specication 4BA240.

New Jersey 800-922-0724

New Hampshire 800-895-8265

Pennsylvania 888-972-6323

Virginia 866-828-2657

North Carolina 910-829-4980

Florida 866-837-1810

71

TANKS

TANKS

M ANCHESTER A LUMINUM F ORKLIFT C YLINDERS

20 LB

33.5 LB

43.5 LB

9290

9317 9317.12*

3 Hole Head No Gauge

4 Hole Head No Gauge

5 Hole Head Code 12

43ALFL12W 9161 9305 9315

9300 9310 9164

5 Hole Head Plugged Fill Code 13

WATER ACME CAP (LBS) FAST FILL 47.6 No 47.6 Yes 47.6 Yes 80 No 80 Yes 80 No 80 Yes 105 Yes 105 No 10% OUTAGE Yes Yes Yes Yes Yes Yes Yes Yes Yes

PART NUMBER 9285 Buffer/Vapor** 9287 Buffer/Vapor** 9305 9310 9315 9290 9317 9161 9164

LP CAP 20LB 20LB 20LB 33.5LB 33.5LB 33.5LB 33.5LB 43.5LB 43.5LB

OVER ALL LENGTH 20.38 20.38 20.38 28.56 28.56 28.56 28.56 33.94 33.94

CYL DIAM. 12.28 12.28 12.28 12.28 12.28 12.28 12.28 12.28 12.28

GUARD DIAM. 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5

FOOT RING DIAM. 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5

TARE WT (LBS) 17 17 17 23.5 23.5 23.5 23.5 25 25

GAUGE Yes Yes Yes Yes Yes No No Yes Yes

ACME CONN Yes Yes Yes Yes Yes Yes Yes Yes Yes

TANKS

NOTE: We are the largest warehouse for forklift cylinders. We can stamp your name on the collar. * Has a plugged ll opening. ** Buffer tanks are for use in vertical position only.

All cylinders on this page are manufactured to meet or exceed DOT Specication 4E240.

72

Order on-line: www.tarantin.com

TANKS

R ELIEF VALVES

F ORKLIFT C YLINDER B RACKETS

7545-12

7545-14A 8545AK

7545-40

8545-41

PART NUMBER 8545AK 7545-14 7545-12 7545-40 8545-41 9103-54

DESCRIPTION 3/4" NPT RELIEF 375PSI 45 PIPE AWAY ADAPTER 90 PIPE AWAY ADAPTER RAIN CAP W/STRAP FOR 8545AK RAINCAP-PUSH-ON RAINCAP FOR 7545-14

PART NUMBER CYLINDER SIZE DESCRIPTION TB-2 33 1/2LB & 43 1/2LB Horizontal TB-3 20LB Vertical TB-4 20LB Horizontal TB5 14LB Vertical TB-6 14LB Horizontal TB2-60 Any Toggle Latch Only

REPLACEMENT DIALS FOR ROCHESTER FLOAT GAUGES

TAYLOR V ISIBLE R EPLACEMENT D IALS

PART NUMBER 2733U-CV DESCRIPTION JR Universal 33LB Motor Fuel JR Universal 43LB Motor Fuel

PART NUMBER 5-01791

DIAL SIZE Junior

TYPE OF TANK 33LB Universal 2743U-CV

S CREWS AND G ASKETS

PART NUMBER 40-414S 40-415S 40-416 15-004 15-007 DESCRIPTION Junior Head Screw Senior Head Screw Dial Screw Senior Gauge Gasket Junior Gauge Gasket

FLOAT GAUGES FOR FORKLIFT CYLINDERS

CYLINDER SIZE 20 LB 33 1/2 LB 43 1/2 LB P A JR JU086B JU160B JU212A R T N U M 1 1/4" MNPT TU086B TU160B TU212A B E R 3/4" MNPT HU086B HU160B

New Jersey 800-922-0724

New Hampshire 800-895-8265

Pennsylvania 888-972-6323

Virginia 866-828-2657

North Carolina 910-829-4980

Florida 866-837-1810

73

TANKS

TANKS

R EG O S ERVICE VALVES FOR D OT F ORKLIFT C YLINDERS

Designed specically for vapor or liquid withdrawal service on DOT forklift containers. Valves with 1.5 GPM closing ow are for use in small and medium size lift truck applications, while those with 2.6 GPM closing ow are for large lift trucks and gantry crane type vehicles.
CLOSING FLOW (LP-GAS) V A P O R 25 PSIG 100 PSIG LIQUID INLET (SCFH) INLET (SCFH) (GPM) 430 900 1.5 550 1050 2.6 430 900 1.5 550 1050 2.6 APPROXIMATE FILLING RATE LIQUID FLOW, GPM PRESSURE DROP ACROSS VALVE 10 PSIG 5.0 5.0 4.5 4.5 25 PSIG 7.6 7.6 7.2 7.2 50 PSIG 10.7 10.7 10.3 10.3 100 PSIG 14.9 14.9 14.8 14.8

9101P5

PART NUMBER 9101P5 9101P5H 9101P6 9101P6H

CONTAINER CONNECTION 34" M. NGT 34" M. NGT 34" M. NGT 34" M. NGT

SERVICE CONNECTION 38" M. NPT 38" M. NPT 38" M. NPT 38" M. NPT

LIQUID WITHDRAWAL CONNECTION None None 14" NPT 14" NPT

NOTE: These valves incorporate an excess ow valve.

R EG O F ORKLIFT CONNECTORS
These brass connectors are especially designed to join the carburetor fuel line to the service valve on lift truck cylinders.
PART NUMBER 7141M 7141F APPLICATION INLET OUTLET Service Valve 38" F. NPT 1 14" M. ACME Fuel Line 1 14" F. ACME 14" F. NPT PROTECTIVE C AP* RUBBER BRASS 7141M-40 7141FP

7141M

* Recommended to minimize foreign material entering valves which could result in leakage.

Accessories
PART NUMBER 7141M-3R MSW-4 2114A DESCRIPTION RegO Outer Flat Washer Outer Washer Flat Inner O-ring MSW-4

7141F

F IXED L IQUID L EVEL G AUGES

PART NUMBER 3165CF05.6 3165C

REGO DOUBLE BACKCHECK FILLER VALVE

1 3/4" M. ACME x 3/4" MPT high capacity lling used on DOT and ASME containers for fast lling.

TANKS

DESCRIPTION 12" Tube Supplied Fixed Level Gauge

3165CF05.6

7647SCT with everseal on threads

74

Order on-line: www.tarantin.com

TANKS
Did you know we have many remote pick-up yards where you can get a tank in a hurry. Call for the locations nearest you.

M ANCHESTER DOT C YLINDERS

Manchester ASME and DOT 200 and 420 offer the best nish and features in the industry.
Large 16" Diameter Collar Large Vented Collar & Foot Ring Full Load Lift-Lugs Armor-Clad III Powder Coat Paint All Threads Sealed with Blue Everseal Heavy-Duty Hinged Lid 4 Hole Head Design HPPE Plastic Lids No Rust or Dents Colors Available Vacuum Pre-purged

DOT 200LB

DOT 420LB

PART NO. 14205.29 PART NO. 14205.30 PART NO. UPON REQUEST Water Capacity, LBS Overall Length(OL) Cylinder Diameter Guard Diameter Foot Ring Diameter Tare Weight, Lbs.

COLOR GRAY WHITE SPECIAL COLOR 476 42.12 24 14 20 147

PART NO. 1499.101 PART NO. 1499.102 PART NO. UPON REQUEST Water Capacity, LBS Overall Length(OL) Cylinder Diameter Guard Diameter Foot Ring Diameter Tare Weight, Lbs.

COLOR GRAY WHITE SPECIAL COLOR 1000 53.25 30 16 23.12 270

420 D.O.T. and A.S.M.E. Basic Comparisons

DIAMETER 30" 30" RETEST O.L. WT. PERIOD 53.25" 270 lbs. 12/5 Yrs. 53.25" 309 lbs. None MATERIAL THICKNESS NAMEPLATE Stamped in Collar Stainless Steel Riveted in Collar FINISH Powder Coated Mastic Dip Powder Coated Mastic Dip T/L 99 99 TRANSPORTATION RELIEF VALVE WITH PROPANE PRESSURE Yes-80% 375 Yes-80% 250

13% Heavier More Corrosion Protection

All cylinders on this page are manufactured to meet or exceed DOT Specication 4BW240.

New Jersey 800-922-0724

New Hampshire 800-895-8265

Pennsylvania 888-972-6323

Virginia 866-828-2657

North Carolina 910-829-4980

Florida 866-837-1810

75

TANKS

D.O.T. 420 A.S.M.E. 420

TANKS

M ANCHESTER ASME TANKS

ASME 200LB

Large 16" Dia. Collar Large Vented Collar and Foot Ring Full Load Lift-Lugs Armor-Clad III Powder Coat Paint All Threads Sealed with Blue Everseal Heavy-Duty Hinged Lid Stainless Steel Nameplate Optional Liquid Withdrawal Plastic Lids Colors Available Vacuum Pre-purged

ASME 420LB

PART NO. 6765.4 PART NO. 6765.5 PART NO. UPON REQUEST Water Capacity, GALS Overall Length(OL) Cylinder Diameter Guard Diameter Foot Ring Diameter Tare Weight, Lbs.

COLOR GRAY WHITE SPECIAL COLOR 57 42.4 24 14 18 172

PART NO. 6762.7 PART NO. 6762.8 PART NO. UPON REQUEST Water Capacity, GALS Overall Length(OL) Cylinder Diameter Guard Diameter Foot Ring Diameter Tare Weight, Lbs.

COLOR GRAY WHITE SPECIAL COLOR 120 53.3 30 16 24 326

All cylinders on this page are manufactured to meet or exceed the American Society of Mechanical Engineers (ASME) specications.
REPAIR PARTS FOR 200 POUND CYLINDERS
CYLINDER TYPE DOT DOT DOT/ASME ASME DESCRIPTION Multivalve 3/4" for Vapor Withdrawal Multivalve 3/4" for Vapor Withdrawal Service Valve 3/4" Relive Valve 1", 250 PSI Relief Valve 1", 375 PSI Fill Valve 3/4" Float Gauge 1" MNPT JR Gauge 24" Dial PART NUMBER 8555RT10.6 8555RT11.6 9101RT11.1 8544G 8544KT 7647SCT HA180A JA176B

REPAIR PARTS FOR 420 POUND CYLINDERS

CYLINDER TYPE DOT ASME DOT ASME DOT/ASME DOT/ASME DOT/ASME DOT/ASME DOT/ASME DESCRIPTION Multivalve 3/4" Multivalve 3/4" Multivalve 1" Multivalve 1" Service Valve Fill Valve 3/4" Fill Valve 1 1/4" Float Gauge 1" MNPT JR Gauge PART NUMBER 6533R11.7 6532RT12.0 6543RT11.7 or 12.0 6542RT12.0 9101RT11.1 or 11.7 7647SCT 7579 HA254J JA250J

TANKS

DOT DOT/ASME DOT/ASME DOT/ASME

76

Order on-line: www.tarantin.com

TANKS

M ANCHESTER ASME TANKS

100lb ASME Manchester Mini

The Perfect Patio Solution Low center of gravity means more stability Wide 360 welded collar for safety and ease of installation Multivalve and gauge for onsite fill Vacuum purged HDPE lids
Part Number: 68143

SPECIFICATIONS: Overall Length(OL) 36.69" Height 29.75" Diameter 18" WC 238# B 15.5"

300lb ASME Manchester Mini

When a 200lb is too small and a 420lb is too big State-of-the-art powder coated finish Armor-Clad III Lifting lugs for easy handling Vacuum purged HDPE lids
Part Number: 68212

SPECIFICATIONS: Overall Length(OL) 40.9" Height 34" Diameter 30" WC 2911.7# B 23.1"

New Jersey 800-922-0724

New Hampshire 800-895-8265

Pennsylvania 888-972-6323

Virginia 866-828-2657

North Carolina 910-829-4980

Florida 866-837-1810

77

TANKS

TANKS
Motor Fuel Style
Floor Mount Tank for Narrow Body Pickup Beds and Utility Boxes Motorfuel Tanks for Under Pickup Tool Boxes

Standard Type #1-45 Motorfuel Tank for Trucks

Underbody, Manifold Motorfuel Tank for Vans (rear mount)

Trunk Mount Compact & Mid-Sized Fleet Vehicles

MODEL NUMBER 200347 24457 26087 20607* 20727 23117 23127 23147 224147* 24437* 256271

SIZE 12 + 12 X 60 20X48 20X60 14X48 18X80 20X42 20X48 24X48 10X44 12X41 14X37

DESCRIPTION UNDER TOOL BOX PICK-UP NARROW BED TRUCK PICK-UP STANDARD BED MOUNT PICK-UP WITH UNIVERSAL BRACKETS SCHOOL BUS SLICK TRUCK SLICK TRUCK SLICK TRUCK SLICK UNDERBODY ADJ. BRACKETS CHEVY VAN UNIVERSAL CAR TRUNK UNIVERSAL

VALVES UPPER 45 TOP UPPER 45 LOWER 45 UPPER 45 UPPER 45 UPPER 45 UPPER 45 LOWER 45 LOWER 45 UPPER 45

W.C. 54.5 58.6 74.4 29.2 81.3 50.7 58.6 83.1 13.8 18.3 22.1

LP CAP 43.6 46.9 59.6 23.3 65.1 40.6 46.9 66.5 11.0 14.6 17.7

T.W. 209 164 190 105 221 146 167 221 56 77 81

Additional sizes available, request catalog. * Special order.

All tanks on this page are manufactured to meet or exceed the American Society of Mechanical Engineers (ASME) specications.

TANKS

Dont miss the accessories on the next 3 pages!

78

Order on-line: www.tarantin.com

TANKS
For more accessories, see the next 2 pages.

A CCESSORIES FOR M OTORFUEL TANKS

Heavy Duty Strap Brackets
PART NUMBER 2636* 2518 2506 25291 2507 25071 25091
* Special order.

SIZE 14" 16" 18" 18" 20" 20" 24"

BRACKETS DESCRIPTION PAIR, STANDARD DUTY PAIR, STANDARD DUTY PAIR, STANDARD DUTY PAIR, HEAVY DUTY FOR SCHOOL BUS, ETC. PAIR, STANDARD DUTY PAIR, HEAVY DUTY PAIR, HEAVY DUTY

WEIGHT 36 37 41 82 42 84 101

RegO Check Filler Valve

Designed to provide fast lling of forklift, motor fuel, and recreational vehicle tanks.
Replacement Fill Cap Part Number: 3174-9P PART NUMBER ACME TANK HOSE CONNECTION CONNECTION M. NPT 1 3/4" 3/4" PART NUMBER V13414

Auto-stop Filler Valve

TRIPLE-L

V13414

STYLE

7647SCT w/Lanyard & Cap

DESCRIPTION CEODEUX 80% STOP-FILL VALVE-3/4" MPT

* Requires a 3/4" ll valve.

RegO Relief Valves Fully Internal Pop Action

8543 Series relief valves are designed for use as a primary relief valve in larger ASME motor fuel containers such as on buses, trucks and construction equipment. 8544 Series relief valves are designed for use as a primary relief valve in smaller ASME and DOT motor fuel containers such as on tractors, lift trucks, cars and taxicabs.
START TO DISCHARGE SETTING PSIG 312 312 CONTAINER CONNECTION M.NPT 1" 1 14" OVERALL HEIGHT (APPROX.) 5 716" 5 716" HEIGHT ABOVE COUPLING (APPROX.) 78" 78" HEX WRENCHING SECTION 1 516" 1 1116"

New Jersey 800-922-0724

New Hampshire 800-895-8265

Pennsylvania 888-972-6323

Virginia 866-828-2657

North Carolina 910-829-4980

Florida 866-837-1810

79

TANKS

PART NUMBER 8544T 8543T

CONTAINER TYPE ASME ASME

TANKS

M ANCHESTER RV ASME VAPOR S ERVICE TANKS

ASME Permanent Mount Tanks for Motor Home and Van

6814

62207

MODEL NUMBER 6810 6813 6814 6840 6802 6819 6820 6804 62207*

SIZE 8X30 10X23 10X32 12X28 12X32 12X42 12X42 14X40 10X32

BRACKET ADJUSTABLE ADJUSTABLE ADJUSTABLE TOP ANGLE UNIVERSAL UNIVERSAL UNIVERSAL UNIVERSAL UNIVERSAL

VALVE LOWER 45 LOWER 45 LOWER 45 SIDE FIT SIDE FIT SIDE FIT LOWER 45 SIDE FIT SIDE FIT

WATER CAP. 6.0 7.1 10.2 12.2 14.4 19.4 19.4 23.8 9.9

T.W. 45 40 46 50 60 75 75 90 34

* CATERING TRUCK TANK Note: Above tanks include oat gauge, but dial is additional. Specify standard or remote dial.

All tanks on this page are manufactured to meet or exceed the American Society of Mechanical Engineers (ASME) specications.

A CCESSORIES
Cylinders Mounting Brackets for RVs
PART NUMBER 1803 1811 1805 1806 1807 1809 1810 1588 1589 DESCRIPTION 30 LB DUAL RACK COMPLETE 40 LB DUAL RACK COMPLETE 20 LB CENTER ROD 3/8" X 18" 30 LB CENTER ROD 3/8" X 24" 40 LB CENTER ROD 3/8" X 30" WING NUT ONLY 3/8" DUAL RACK BASE W/3/8" NUT HOLD DOWN BAR REGULATOR MOUNTING BRACKET

TANKS

80

Order on-line: www.tarantin.com

TANKS

RV TANK A CCESSORIES AND R EPLACEMENT PARTS

Regulators Twin Stage
The rst stage features a lever arm design that improves both the efciency and regulation. Combined with the second stage regulator, the overall performance assures even smoother and more continuous ow of gas to all appliances. 160,000 BTU capacity.
PART NUMBER 290-00 299-00 DESCRIPTION Vent Over Outlet 9 Oclock Vent

Regulator Cover
863-00P Both First and Second Stage Covers in Bag with Header Card

Extend-A-Stay and Extend-A-Flow

Extend-A-Stay 536-00 Standard Kit with 5 ft. pigtail and tee tting 537-00 Deluxe Kit with tee tting, 12 ft. hose and 5 ft. pigtail

RegO Check Filler Valve

Designed to provide fast lling of forklift, motor fuel, and recreational vehicle tanks.
Replacement Fill Cap Part Number: 3194-9P PART NUMBER ACME TANK HOSE CONNECTION CONNECTION M. NPT 1 3/4" 3/4"

STYLE

7647SCT w/Lanyard & Cap

Typical Extend-A-Stay Motorhome Installation

PART NUMBER G12653

G12653

DESCRIPTION Dial, gauge ASME

538-00 Extend-A-Flow Plus QCC/TYPE 1

RegO Relief Valves Fully Internal Pop Action

8543 Series relief valves are designed for use as a primary relief valve in larger ASME motor fuel containers such as on buses, trucks and construction equipment. 8544 Series relief valves are designed for use as a primary relief valve in smaller ASME and DOT motor fuel containers such as on tractors, lift trucks, cars and taxicabs.
PART NUMBER 8544T 8543T CONTAINER TYPE ASME ASME START TO DISCHARGE SETTING PSIG 312 312 CONTAINER CONNECTION M.NPT 1" 1 14" OVERALL HEIGHT (APPROX.) 5 716" 5 716" HEIGHT ABOVE COUPLING (APPROX.) 78" 78" HEX WRENCHING SECTION 1 516" 1 1116"

New Jersey 800-922-0724

New Hampshire 800-895-8265

Pennsylvania 888-972-6323

Virginia 866-828-2657

North Carolina 910-829-4980

Florida 866-837-1810

81

TANKS

TANKS

M ANUAL P ROPANE F LARE T OWER

Flare Up to 529 Gallons/HR No Electricity Required Compact & Portable Design Quick & Easy Setup Simple to Use Great for Emergency Evacuation Situations Stable & Sturdy Construction Made in the USA

PART NUMBER PFM-16LPS PFM-25

DESCRIPTION 1/2" Manual Flare 25' Hose Extension Kit

PFM-16LPS Please note: cylinder not included PFM-25

M INUTEMAN TANK A NCHORING S YSTEM FOR F LOOD P LAIN T IEDOWN

High waters can dislodge unachored tanks causing spills, environmental and property damage. Loose tanks may explode causing injuries. Buried tanks can be pushed to the surface by the buoyant effect of soil saturated by water. Floating tanks become battering rams causing property damage.
PART NUMBER 1346 1593 1284 2391 2010-Minute 2365 2375 2382 2730 2741 DESCRIPTION 36" Earth Anchor w/ 4" & 6" Disks 36" Earth Anchor w/ 4" & 6" Disks & Stabilizer 50" Earth Anchor w/ Doulde 4" Disks Dry Concrete Anchor w/ Bolt Expansion Sleeve Split Bolt and Nut Stainless Steel Sling w/Sheathed Strap & Seals Stainless Steel Strap 100 Ft Roll Strap Sheathing - 150 Feet Minute Man Drive Machine Minute Man Anchor Adapter USE Dense / Normal Soil Dense / Medium Soil Loose to Medium Soil Concrete - Dry All Anchors For Vertical Cylinders Note: 120 gal. to 350 gal. tanks need 1 strap and 2 anchors, 351 gal. tanks to 1500 gal. tanks require 2 straps and 4 anchors.

TANKS

82

Order on-line: www.tarantin.com

TANKS

T RINITY U NDERGROUND TANKS

No Mastic Needed!
Red Oxide Powder Coating Epoxy Designed for Immediate Burial
Overall Length Top of Relief Valve Riser Height Lid & Shroud Assembly Liquid Withdrawal

Duplicate Data Plates Convenient and Easy Anode Attachment, allows for Testing of Cathodic Protection Available 14" or 28" Risers Vacuum Pre-purged Seamless Dome Plastic Rust Free Domes

Trinity Underground Tanks

TANK SIZE IN W.G. 120 GAL* 250 GAL* 320 GAL* 500 GAL* 1000 GAL* 2000 GAL* NUMBER STACK 9 7 7 5 5 4 PER LOAD 63 35 28 25 15 8 OVERALL LENGTH 5' 5 7/8" 7' 2 1/2" 8' 11 3/4" 9' 10" 15' 10 7/8" 23' 9 3/8" OUTSIDE DIAMETER 24" 31.5" 31.5" 37.42" 40.96" 46.614" OVERALL HEIGHT 14" RISER 28" RISER 3' 9 7/8" 4' 8 3/8" 4' 5 3/8" 5' 3 3/8" 4' 5 3/8" 5' 3 3/8" 4' 11 3/8" 5' 9 7/8" 5' 2 7/8" 6' 1 3/8" 5' 8 13/16" 6' 7 5/16" WEIGHT LBS 252 472 588 921 1731 3685

* Tanks are available with short or long risers

Replacement Valves for Trinity Underground Tanks

REGO C H E K - LO K VA LV E S
TANK SIZE 120 WG 250 WG 320 WG 500 WG 1000 WG 2000 WG MULTIVALVES G8475RV G8475RV G8475RV G8475RV G8475RV G8475RV BOTTOM 1 1/4" 7591U 7591U 7591U 7591U 7591U 7591U TOP 3/4" 7590U 7590U 7590U 7590U 7590U 7590U

Replacement Float Gauges for Trinity Underground Tanks

TANK SIZE 120 WG 250 WG 320 WG 500 WG 1000 WG 2000 WG SQUIBB TAYLOR FLOAT GAUGES 14" RISER 28" RISER JB213B JB340A JB251A JB376A JB251A JB376A JB277A JB404D JB297A JB424C JB450D ROCHESTER FLOAT GAUGES 14" RISER 28" RISER 6281-0490 6281-0491 6281-0534 6281-0535 6281-0534 6281-0535 6281-0427 6281-0426 6281-0524 6281-0418 REPLACEMENT DIAL SQUIBB TAYLOR ROCHESTER 2700CV 5-01813 2700CV 5-01813 2700CV 5-01813 2700CV 5-01813 2700CV 5-01813 2700CV

All tanks on this page are manufactured to meet or exceed the American Society of Mechanical Engineers (ASME) specications.
New Jersey 800-922-0724 New Hampshire 800-895-8265 Pennsylvania 888-972-6323 Virginia 866-828-2657 North Carolina 910-829-4980 Florida 866-837-1810

83

TANKS

TANKS

T RINITY A BOVEGROUND AND A BOVE /U NDERGROUND TANKS

Overall Length Liquid Withdrawal Dome Relief Valve

Powder Coated for Long Lasting Protection Vacuum Pre-purged AG/UG with Red Oxide Underground Protection Available in a Wide Range of Colors AG/UG Plastic Rust Free Domes
Plug Leg Spacing

Trinity Aboveground and Above/Underground Tanks

TANK SIZE IN W.G. 120 GAL 250 GAL 320 GAL 500 GAL 1000 GAL 2000 GAL NUMBER PER STACK LOAD 12 96 9 63 9 45 6 30 5 15 4 8 OVERALL LENGTH 5' 5 7/8" 7' 2 1/2" 8' 11 3/4" 9' 10" 15' 10 7/8" 23' 9 3/8" OUTSIDE DIAMETER 24" 31.5" 31.5" 37.42" 40.96" 46.614" OVERALL HEIGHT 3' 9 7/8" 4' 5 3/8" 4' 5 3/8" 4' 11 3/8" 5' 2 7/8" 5' 8 13/16" LEG WIDTH 10 1/8" 12 3/4" 12 3/4" 15" 16 1/4" 21" LEG WIDTH 3' 3' 6" 4' 1/4" 5' 9' 20' WEIGHT LBS 245 472 588 871 1729 3676

Replacement Parts for Trinity Aboveground and Above/Underground Tanks

TANK SIZE 120 WG 250 WG 320 WG 500 WG 1000 WG 2000 WG

REGO CHEK-LOK VALVES

MULTIVALVES 7556RT DT 6.7 7556RT DT 8.5 7556RT DT 8.5 7556RT DT 10.5 7556RT DT 11.3 7556RT DT 12.7 BOTTOM 1 1/4" 7591U 7591U 7591U 7591U 7591U 7591U TOP 3/4" 7590U 7590U 7590U 7590U 7590U 7590U

RELIEF VALVE 7583G 7583G 7583G 8684G 8685G 8685G

FILLER VALVE 7579T 7579T 7579T 7579T 7579T 7579T

Replacement Parts for Trinity Aboveground and Above/Underground Tanks

TANK SIZE 120 WG 250 WG 320 WG 500 WG 1000 WG 2000 WG SQUIBB TAYLOR GAUGES 1" MNPT HA130A HA162A HA162A HA194A HA210A ROCHESTER GAUGES 1" SCREW B8981-1224 B8981-1232 B8981-1232 B8981-1237 B8981-1241 B8981-1146 REPLACEMENT DIAL SQUIBB TAYLOR ROCHESTER 2701CV 5-01749 2701CV 5-01749 2701CV 5-01749 2701CV 5-01749 2701CV 5-01749 2701CV

TANKS

All tanks on this page are manufactured to meet or exceed the American Society of Mechanical Engineers (ASME) specications.

84

Order on-line: www.tarantin.com

TANKS

A MERICAN W ELDING & TANK R EPLACEMENT PARTS

Aboveground and Above/Underground Tank Replacement Parts
TANK SIZE 120 GAL 150 GAL 250 GAL 325 GAL 500 GAL 850 GAL 1000 GAL 1450 GAL 1990 GAL MULTIVALVE 7556RT12.0 7556RT12.0 7556RT12.0 7556RT12.0 7556RT12.0 7556RT12.0 7556RT12.0 7556RT13.0 7556RT13.0 DIP TUBE LENGTH 7 7 9 9 10 11.1 11 13 13 FILLER VALVE 7579 7579 7579 7579 7579 7579 7579 7579 7579 RELIEF VALVE 7583G 7583G 7583G 7583G 8684G 8685G 8685G 8685G 8685G TA210A TA240A TA240A FLOAT JR SCREW 1 1/4" 1" TA130A TA130A TA160A TA160A TA194A HA130A HA130A HA160A HA160A HA194A HA210A HA210A REPLACE DIAL 5-01749 5-01749 5-01749 5-01749 5-01749 5-01749 5-01749 5-01749 5-01749 LIQUID CHECK VALVE 1-1 1/4" BOT. 3/4" TOP N/A N/A Optional Optional Plugged Plugged Plugged Plugged Plugged 7590U 7590U 7590U 7590U 7590U 7590U 7590U 7591U 7591U

Underground Tank Replacement Parts

TANK SIZE 120 GAL 150 GAL 250 GAL 325 GAL 500 GAL 850 GAL 1000 GAL 1450 GAL 1990 GAL MULTIVALVE G8475RV G8475RV G8475RV G8475RV G8475RV G8475RV G8475RV G8475RV G8475RV JB316C JB386D J R F L O AT G A U G E 11 1/4" 18 1/4" JB232A JB232A JB262A JB262A JB296A JB302A JB302A JB332A JB332A JB370F REPLACE DIAL 5-01813 5-01813 5-01813 5-01813 5-01813 5-01813 5-01813 5-01813 5-01813 DOME & LID 8-1/2" RISER 15-1/2" RISER Dome U/G 18 Dome U/G 18 Dome U/G 18 Dome U/G 18 Dome U/G 18 Dome U/G 18 Dome U/G 18 Dome U/G 18 Dome U/G 18 Dome U/G 24 Dome U/G 24 Dome U/G 24 Dome U/G 24 Dome U/G 24 Dome U/G 24 Dome U/G 24 Dome U/G 24 Dome U/G 24 CHECK LOCK VALVE 7572FC 7572FC 7572FC 7572FC 7572FC 7572FC 7572FC 7572FC 7572FC

Replacement Parts for G8475RV

PART NUMBER MV3231G 19104-80 8475-50 8475-51A DESCRIPTION Relief Valve Service Valve Repair Bonnet Filler Valve Repair Vapor Equalizing Kit

New Jersey 800-922-0724

New Hampshire 800-895-8265

Pennsylvania 888-972-6323

Virginia 866-828-2657

North Carolina 910-829-4980

Florida 866-837-1810

85

TANKS

TANKS

UNDERGROUND ANCHORING EQUIPMENT

For 500 and 1000 Gallon Tanks
Designed to secure both 500 and 1000 gallon U/G Tanks
PART NUMBER UG-KIT KIT CONTAINS (2) 1/2" X 15FT CABLES (4) 1/2" X 6 TURNBUCKLES (20) 1/2" CABLE CLIPS (4) 1/2" X 9" X 15" ANCHORS

P URGE -I T -VAC A DAPTER

No labor No wasted propane The purge-it-vac allows you to insert methanol and your rst ll of propane without disconnecting the adapter. The purge-it vac adapter is easy to use and meets NPGA #133-899a) on the purging of LP-Gas containers.
Part Number: Purge-It-Vac

W IRELESS LP G AS TANK L EVEL M ETER M AGNESIUM A NODE B AG

5, 9, and 17lb anode with 10ft X #12 gauge electrical lead attached. Bagged and boxed for shipping protection.
Part Numbers: MG-5LB MG-9LB MG-17LB

Numerical and Graphic LCD Display Remote Transmitter weather tight Wireless Operation up to 150 feet from base Part Number: RS-228

E LECTRODE E XTENSION
30" long intermediate electrode extension. Can be used with MCM model ETM, I.A. and LC series meters or between the electrode and the standard electrode extension so that the electrode can be easily placed at the desired location inside manholes, water tanks, etc. Will t through a 1" diameter augered hole. Part Number: 16203

A NODE M ONITORING S TATION

When buried in the ground, provides a central point where 4 or 5 underground tank anodes can be monitored. ABS plastic shaft PVC terminal board Heavy-duty cast iron cover and collar Part Number: NM-4 4 Terminal
Part Number: NM-5 5 Terminal

A NODE S PLICE
Utilized in conjunction with pre-mounted anode lead wires on BSK-1 Underground Tanks. Includes burndy crimp and heat-shrink sleeve. Basic pliers or electrical crimp tool provide a solid connection.

A NODE T EST K IT
Anode Test Kit includes: 6A half cell - reference electrode Digital multimeter w/wired probes Storage case
Part Number: ATK-1

TANKS

R ISER P IPE C LAMP

DESCRIPTION 6A Half Cell Reference Electrode Copper Sulfate Copper Sulfate Anti-Freeze

PART NUMBER 6A 16906 17105

Retrot anode connection for existing or new underground tanks.

Part Number: RPC.1

86

Order on-line: www.tarantin.com

TANKS
Imagine your companys name on the side of one of these beauties what great advertising. Call for a quotation today!

M ANCHESTER V ERTICAL D ISPENSING TANK

The Advantages of Manchester Tanks Quality Vertical Dispensers
Dispensers are very visible and great for advertising. Space saving verticals only require 78.5 sq. ft. (10 ft. diameter), plus the necessary clearances in accordance with N.F.P.A. Pamphlet No. 58 and /or local codes. Valuable time and materials are saved in preparing a concrete foundation. Portable bases make it easier to relocate dispensers. Base supports the dispenser to safely endure up to a Seismic Zone 4 and 120 MPH winds. Bases available for our 660, 1150, 1250 and 1600 gal. dispensers. All Manchester Tank dispensers are National Board registered. Complete installation instructions will be shipped with the tank and are also available through customer service.

* Base, crash post and railings are not available on #23354(2000 gal. tank)

All tanks on this page are manufactured to meet or exceed the American Society of Mechanical Engineers (ASME) specications.
New Jersey 800-922-0724 New Hampshire 800-895-8265 Pennsylvania 888-972-6323 Virginia 866-828-2657 North Carolina 910-829-4980 Florida 866-837-1810

87

TANKS

1A. Liquid Line= 1 1/4" NPT and 2" NPT for 1600 & 2000 gal. (only) 1B. Liquid line= 1 1/4" (all) 2A. Relief= 1 1/4" NPT (all) 2B. Relief= 3/4" NPT for 1600 & 2000 gal. 3. Vapor line= 3/4" NPT with Excess Flow Check 4. Outage= 1/4" NPT 5. Sight Gauge= QTY.(2) SR. 6. Fill= 1 1/4" NPT with 1 3/4" ACME Fill 7. Vapor Return= 3/4" NPT with Excess Flow Check

CATALOG NUMBER 29014 22014 29016 23354

W.C. 660 1150 1600 2000

L.P. CAP. 528 920 1280 1600

DIA. 3' 6" 4' 4' 4' 6"

HT. 11' 9.5" 15' 1.5" 19' 10.5"

TANK HT. 9' 11" 13' 3" 18' 18' 7.5"

W.P. 250 250 250 250

T.W. 2025 2878 4120 4540

CATALOG NUMBER 29005* 22774*

DESCRIPTION 10ft. x Shape Steel Dispenser Base Crash Posts and Protective Railing

SHIP. WEIGHT 413 lbs. 305 lbs.