Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 263 views

    ZHRV5

    Uploaded by

    thaisub
    1. The document provides operating instructions for ZHRV5 series single-phase voltage control relays. 2. The relays can be used to protect electrical equipment from over-voltage and under-voltage conditions. They have adjustable voltage thresholds, time delays, and locking/non-locking modes. 3. The relays are small in size at 18mm wide and have LED indicators to show operating status. They are designed for DIN rail mounting.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    ZHRV5

    Uploaded by

    thaisub
    263 views2 pages
    1. The document provides operating instructions for ZHRV5 series single-phase voltage control relays. 2. The relays can be used to protect electrical equipment from over-voltage and under-voltage conditions. They have adjustable voltage thresholds, time delays, and locking/non-locking modes. 3. The relays are small in size at 18mm wide and have LED indicators to show operating status. They are designed for DIN rail mounting.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document provides operating instructions for ZHRV5 series single-phase voltage control relays. 2. The relays can be used to protect electrical equipment from over-voltage and under-voltage conditions. They have adjustable voltage thresholds, time delays, and locking/non-locking modes. 3. The relays are small in size at 18mm wide and have LED indicators to show operating status. They are designed for DIN rail mounting.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    263 views2 pages

    ZHRV5

    Uploaded by

    thaisub
    1. The document provides operating instructions for ZHRV5 series single-phase voltage control relays. 2. The relays can be used to protect electrical equipment from over-voltage and under-voltage conditions. They have adjustable voltage thresholds, time delays, and locking/non-locking modes. 3. The relays are small in size at 18mm wide and have LED indicators to show operating status. They are designed for DIN rail mounting.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    IEC60947-5-1

    Operating Instructions for ZHRV5 Series Relay


    Function Features
    Controls its own supply voltage(True RMS measurement). User may select operation mode through knob. Measuring frequency range:45Hz-65Hz,DC. The relay is only 18mm wide. Voltage measurement accuracy <1%. Control status is indicated by a LED. The relays are designed for clip-on mounting on rail.
    U> U<

    Single-phase voltage control relay

    Mounting support

    35mm symmetrical DIN rail conforming to EN/IEC 60715

    Panel Diagram
    ZHRV5-01 panel description
    R/T UE
    U 40 50 60
    30 20 70 80V AC/DC 16 18 20% 4 6 8 10s

    1 Relay output and time delay LED.R/T 2 Over/under voltage fault LED.UE 3 Operating function selector knob
    (overvoltage/undervoltage, locking/non-locking)

    Applications
    Protect electrical equipment and motors from over-voltage and under-voltage. Normal/emergency power supply switching.

    H 10 12 14
    8 6 5

    4 Voltage threshold adjusting knob.U 5 Hysteresis control knob.H 6 Time delay control knob . Tt

    Model and Connotation


    ZHRV 5

    Tt
    2 0.1

    /
    Rated supply voltage codes (see Table 2) Function code(see Table 1) ZHRV5 series relay

    ZHRV5-01

    ZHRV5-02 panel description


    R/T >U
    U>40 50 60
    30 20 70 <U 80V AC/DC 70 80V AC/DC 4 6 8 10s

    Table 1
    Function code ZHRV5-01 ZHRV5-02 Overvoltage Undervoltage

    1 Relay output and time delay LED.R/T 2 Overvoltage fault LED.U> 3 Undervoltage fault LED.U< 4 Over voltage threshold adjusting knob .U> 5 Under voltage threshold adjusting knob .U< 6 Time delay control knob . Tt

    Over / undervoltage in windows mode

    Table 2
    Rated supply voltage code D12 AD48 AD240 A220 Rated supply voltage DC 12V AC/DC 24...48V AC/DC 110...240V AC 220V Supply voltage limits DC 7...20V AC /DC15...100V AC/DC 50...270V AC 160...270V Range of adjustment DC 9...15V AC/DC 20...80V AC/DC 65...260V AC 180...260V

    U<40 50 60
    30 20

    Tt
    2 0.1

    ZHRV5-02

    LED functions
    Table 3
    Function R / T:yellow LED UE:red LED U>:red LED U<:red LED

    Technical Parameters
    Rated supply voltage Rated supply frequency Hysteresis ZHRV5-02:3%fixed of threshold setting Time delay Measurement error Run up delay at power up Konb setting accuracy Reset delay Rated insulation voltage IP degree of protection Pollution degree Electrical durability Mechanical durability Height above sea level Operation temperature Relative humidity Storage temperature Conventional heat current Utilisation category Contact capacity Output type Adjustable 0.1...10s,10% <1%over the whole range with voltage variation 0.5s time delay 1%of scale value 1000ms 460V IP20 DC12V,AC/DC24...48V,AC/DC110V...240V , AC220V 50/60Hz +-10%,0 ZHRV5-01:5...20%of threshold setting

    Setting error Output relay energized Tripping delay Overvoltage Undervoltage

    Knob for setting of threshold value

    11 10 9

    12 13 14 15V DC 30 20

    40

    50 60 70 80V AC/DC
    AD48

    3
    100000 cycles 1000000 cycles <=2000m -5...40 <=50%(40) -25...75 5A AC-15 Ue/Ie:250V/1.5A 1/CO

    D12

    220 220 230 210 240 200 250 260V 180 AC


    A220

    140 160 180 200 120 100 220 240 80 260V 65 AC/DC
    AD240

    U>

    U<

    U>40 50 60
    30 20 70 80V

    U<40 50 60
    30 20 70 80V

    R 12

    11 14

    -1-

    Function Diagrams
    ZHRV5-01 Un

    Operating Instructions
    ZHRV5-01

    U>

    U<
    U> H U LED:R / T LED : UE

    Overvoltage, non - locking mode

    11

    14 12

    Tt

    <Tt

    U>

    U<

    Un U> H U LED:R / T

    Overvoltage, locking mode

    LED:UE

    11

    14 12

    Tt

    1.Select operating function selector knob ;the relay takes a reading of operating functions after power-on.In case of knob setting error, LED will flash at the same time, which indicate the setting error. Normal operation will be resumed through resetting after power-off. If the operating function is changed after power-on, all LED indicators would flash while the relay operates based on original operating functions;the LED would resume the normal indication after the original setting is recovered. 2.Regulate the Voltage threshold adjusting knob to set protection threshold value. 3.Regulate the h ysteresis control knob ; hysteresis is 5%...20%of threshold value. 4.When measured volte exceeds the set threshold value of voltage,R/T LED would flash and the UE LED would go ON . When fault time exceeds the set time delay(0.1s...10s) interval,output relay would be disconnected and R/T LED would go OFF. 5.When "over-voltage, non-locking" mode is activated, if the operating voltage is less than the difference between voltage threshold value and lagged value , the output relay would be actuated and the R / T LED would go ON . When "under-voltage, non-locking" mode is activated, if the operating voltage is more than the sum of voltage threshold value and lagged value, the output relay would be actuated and the R / T LED would go ON . 6.In case of "locking" mode, the operating voltage exceeds threshold value and output relay would keep an off-state. The power must be turned off before resetting the relay.

    ZHRV5-02
    1.Regulate the overvoltage and undervoltage threshold adjusting knob threshold value . The set overvoltage threshold value must be larger than undervoltage threshold value. Otherwise, all LEDs would flash and the output relay would be disconnected. 2.Fixed Hysteresis is 5% . 3.When measured voltage exceeds the threshold value, R/T LED would flash and the U> (U<) LED would go ON. When fault time exceeds the set time delay(0.1s...10s) interval, output relay would be disconnected and R/T LED would go OFF. 4.When operating voltage is lower than the difference between overvoltage threshold value and lagged value or higher than the sum of undervoltage and lagged value,the output relay would be actuated and the R / T LED would go ON . Note: hysteresis = set threshold value * set hysteresis value .

    U>

    U<

    Un U H U< LED : R / T LED:UE

    Undervoltage, non-locking mode

    11

    14 12

    Tt

    <Tt

    Overall Dimensions
    A1 A2

    U>

    U<

    Us U H U< LED:R / T LED:UE

    U>

    U<

    R/T UE

    U 40 50 60
    30 20 70 80V AC/D C 16 18 20% 4 6 8 10s

    Undervoltage, locking mode ZHRV5-02

    H 10 12 14

    11

    14 12

    Tt

    8 6 5

    Tt
    2 0.1

    ZHRV5-01

    12

    11

    14

    U> H

    66.2max 68.5max 180 . 3

    H U< U LED:R / T LED:U> LED:U<


    11

    Wiring Diagram

    L N
    Tt Tt <Tt <Tt

    F1 A1+
    12

    14 12

    A211 R 14

    U> :Overvoltage threshold U< :Undervoltage threshold H :Hysteresis U :Controlled signal Tt :Delay on threshold crossing

    12

    11

    14

    Warning
    1. This product shall be installed , operated and maintained by professional personnel. 2 . Whether or not the product functions normally , user shall not dismantle or repair the said product without permission, and we shall not assume any responsibility for the accident as a result thereof. 3 . Please refer to the wiring diagram in Operation Instructions when arranging wires. 4 . Never place power input line in the same conduit with other wires with heavy current. Please use shielded wire if necessary so as not to bring about interference that may influence the normal operation of relay. 5 . Do not use this product in areas with dust , corrosive gases and with exposure to direct sunlight and rain. 6 . Never use this product in medium with explosion hazard and with gases that may corrode metals and destroy the insulation, and do not use this product in a space with conductive dust. 7 . Please store and use this product at rated supply voltage and stated temperature , height above sea level and humidity . 8 . Failure to follow these instructions can result in death, serious injury, or equipment damage. 9. The warranty period of this product shall be 18 months under normal use .

    -2-

    You might also like