Mechanical Syllabus

BAPATLA ENGINEERING COLLEGE
(Autonomous)
BAPATLA - 522 101.
SCHEME OF INSTRUCTIONS & EXAMINATION

4 Year B.Tech Program
2014-2015
DEPARTMENT OF MECHANICAL ENGINEERING
Academic Rules & Regulations for B. Tech Programme

(As Approved by The Academic Council & The Governing Body of the College)
(Amended in August 2014; Applicable to the students admitted into the First year B.Tech
from the academic year 2014-2015 onwards).
1.0 EXTENT: All the rules and regulations, specified herein after, shall be read as a whole for the
purpose of interpretation and when a doubt arises, the interpretation of the Chairman,
Academic Council, Bapatla Engineering College (Autonomous) is final. As per the requirements
of the Statutory Bodies, The Principal, Bapatla Engineering College (Autonomous), shall be the
Chairman of the College Academic Council.
2.0 ADMISSIONS:
2.1 Admission into the First year of any Four Year B.Tech Programmes of study in
Engineering: Admissions into the first year of B.Tech Programme of Bapatla Engineering
College (Autonomous) (Subsequently referred to as B.E.C) will be as per the norms
stipulated by Acharya Nagarjuna University and the Govt. of Andhra Pradesh from time
to time.
2.2 Admission into the Second year of any Four year B.Tech Programmes of study in
Engineering: Admissions into the second year of B.Tech Programme of B.E.C will be as
per the norms stipulated by Acharya Nagarjuna University and the Govt. of Andhra
Pradesh from time to time.
2.3 Admissions with advance standing: These may arise in the following cases:
1) When a student seeks transfer from other colleges to B.E.C and intends to pursue
B.Tech at B.E.C in an eligible branch of study.
2) When students of B.E.C get transferred from one regulation to another regulation or
from previous syllabus to revised syllabus.
3) When a student, after long discontinuity, rejoins the college to complete his/her
Programme of study for the award of the degree.
4) When a student is not able to pursue his/her existing Programme of study but
intends to get transferred to another Programme of study.
These admissions may be permitted by the Academic Council of B.E.C as per the norms
stipulated by the statutory bodies and the Govt. of Andhra Pradesh from time to time. In
all such cases for admission, when needed, permissions from the statutory bodies are to
be obtained and the Programme of study at B.E.C will be governed by the transitory
regulations stipulated in 5.3.
3.0 DURATION OF THE PROGRAMME AND MEDIUM OF INSTRUCTION: The duration of the
B.Tech. Programme is for four academic years consisting of two semesters in each academic
year. The medium of instruction and examinations is English.
SNo
Activity
1.
Number of Semester in an
Academic Year
2.
Regular Semester duration in
Weeks
3.
Academic Activities Schedule
Course Work
Examination Preparation
Examinations
Declaration of Results
4.
Evaluation
5.
Other Items
Description
Two
19
15 Weeks
1 Week
2 Weeks
1 Week
Continuous Internal Evaluation (CIE) with a
weightage of 40% and Semester End Examinations
(SEE) with a weightage of 60% of the students
performance in course/laboratory work and other
activities, if any.
The total number of working days in an academic
year shall be >180;
Academic schedules prescribed by the college shall be
be adhered to by all the concerned.
Students failing in any course (s) shall register for
the same again (re-register) and shall secure SEE
afresh in each course(s). This shall continue until a
pass grade is obtained in the said course(s).
4.0 MINIMUM No. INSTRUCTION DAYS:

Each semester shall consist of a minimum of 90 instruction days.
5.0 Programmes of study in B.Tech:
5.1 The Four year B.Tech Programme is offered in the following branches of study:
S.No. Title of the UG Programme
1. Civil Engineering
2. Chemical Engineering
3. Computer Science & Engineering
4. Electrical & Electronics Engineering
5. Electrical & Communication Engineering
6. Electronics & Instrumentation Engineering
7. Information Technology
8. Mechanical Engineering
5.2 Structure of the Programme:
Abbreviation
CE
CH
CS
EE
EC
EI
IT
ME
5.2.1
1)
2)
3)
4)
5)
Each Programme of a Discipline or a branch of study shall consist of:
General courses in Basic Sciences, Basic Engineering Sciences, Social Sciences &
Humanities.
Interdisciplinary courses in Engineering to impart the fundamentals of Engineering
to the student.
Compulsory core courses to impart broad based knowledge needed in the branch
of study concerned.
Elective courses from either discipline or interdisciplinary areas to be chosen by the
student based on his/her interest and specialization preferred.
A Term paper and a Project approved by the Department to be submitted in the
fourth year of study.
Every Programme of study shall be designed to have 45-50 theory courses and 2025 laboratory courses and the distribution of types of courses from the above is
indicated in the following table.
Humanities & Social Science, Basic Science and
Engineering Science courses
Professional Core courses
30 -45%
Professional Elective and Open Elective Courses
10-15%
Major Project / Seminar, etc
5-10%
35-45%
Note: All components prescribed in the curriculum of any Programme of study shall be
conducted and evaluated.
5.2.2
Contact hours: Depending on the complexity and volume of the course,

the number of contact hours per week will be determined.
5.2.3
Credits: Credits are assigned to each course as per norms mentioned in

the following table.
Subject
Theory Course (4 Periods/Week)
5.3
Credits
03
Theory Course with additional Tutorial Period
04
Laboratory Course (3 Periods/Week)

Term paper (2 Periods/Week)
Business communication & Presentation Skills Lab (2 Periods/Week)
Final year Project (12 Periods/Week)
02
01
01
10
Transitory Regulations: For students admitted under advance standing (mentioned in

2.3) these transitory regulations will provide the modus operandi.
At the time of such admission, based on the Programme pursued (case by case)
1)
2)
3)
4)
Equivalent courses completed by the student are established by the BOS

concerned.
Marks/Credits are transferred for all such equivalent courses and treated as
successfully cleared in the Programme of study prescribed by B.E.C.
A Programme chart of residual courses not cleared will be derived and a
Programme of study with duration specified will be prescribed for pursuit at B.E.C.
Marks obtained in the previous system if the case be, are converted to grades and
CGPA is calculated accordingly.
All other modalities and regulations governing shall be the same as those applicable to
the stream of students with whom such a candidate is included into.
5.4 Curriculum for each Programme of study:
1)
2)
3)
4)
The Four year curriculum of any B.Tech Programme of study in any branch of
engineering is formulated based on the guidelines mentioned in 5.2 and will be
recommended by the Board of Studies concerned and is approved by the Academic
council of the college.
In the case of students admitted through lateral entry, the respective regular
curriculum contents from the second year onwards are to be pursued by such
students.
In the case of students admitted under advanced standing, the Programme
curriculum will be prepared by the Board of Studies concerned and the same shall
be approved by the Academic Council.
After approval from the Academic Council, Programme curriculum for the same
shall be prepared and made available to all the students along with the academic
regulations.
Table below shows a typical curriculum frame work for B.Tech Degree program.
Average
no. of credits
1.
Humanities & Social Sciences courses
14
2.
Basic Science Courses
35
3.
Engineering Science
32
4.
Professional Core courses
96
5.
Professional Elective Courses
16
6.
Major Project / Seminar, etc.
11
7.
Open Electives
3
TOTAL
207
The students admitted through the Lateral Entry scheme have to complete 155 credits
S.No.
Subject Area
5.5 The Maximum duration permitted to pursue the programme and cancellation of
admission:
5.5.1 The maximum duration permitted for any student to successfully complete any
four year B.Tech. Programme of study shall be:
1) Eight academic years in sequence from the year of admission for a normal student
admitted into the first year of any Programme,
2) Six academic years in sequence from the year of admission for a Lateral entry
student admitted into the second year of any Programme, and
3) For students admitted with advanced standing, the maximum time for completion
of Programme study shall be twice the period in terms of academic years in
sequence, stipulated in the Programme curriculum defined at the time of
admission.
5.5.2 In case, any student fails to meet the applicable conditions for the eligibility of
degree in the maximum stipulated period as mentioned in 5.5.1, his/her
admission stands cancelled.
6.0 EXAMINATION SYSTEM & EVALUATION:
6.1 The performance of the students in each semester shall be assessed course wise. All
assessments will be done on absolute mark basis. However, for the purpose of reporting
the performance of a candidate, letter grades and grade points will be awarded as per
section 11.0. The performance of a student in each course is assessed with Alternate
Assessment Tests, term examinations on a continuous basis during the semester called
Continuous Internal Evaluation (CIE) and a Semester End Examination (SEE) conducted at
the end of the semester. For each theory, design and/or drawing course, there shall be a
comprehensive Semester End Examination (SEE) of three hours duration at the end of
each Semester, except where stated otherwise in the detailed Scheme of Instruction.
6.2 The distribution of marks between Continuous Internal Evaluation (CIE) and Semester
End Examination (SEE) to be conducted at the end of the semester will be as follows:
Nature of the Course
Theory subjects
Drawing
Practical
Business communication & presentation Skills Lab
Term Paper
Project work
CIE
40
40
40
20
20
50
SEE
60
60
60
30
30
100
6.3 Continuous Internal Evaluation (CIE) in Theory and Drawing subjects:
1.
In each Semester there shall be two Term examinations and two tests from any of
the Alternate Assessment Tools (AAT) like Home Assignment, Class Test, Problem
Solving, Group Discussion, Quiz, Seminar and Field Study in every theory course.
The Alternate Assessment Tool with detailed modality of evaluation for each
course shall be finalized by the teacher concerned before beginning of the course
with the permission of HOD concerned and the PRINCIPAL.
The Term Examination is conducted in the regular mode according to a schedule
which will be common for a particular year of study. The maximum weightage for
Term Examinations, AAT and the calculation of marks for CIE in a theory course is
given in the following table.
Weightage for different heads to calculate CIE for 40 marks in a Theory course
Term Exams
AAT
Attendance
Particulars
(Max. 25 marks)
(Max. 10 marks)
(Max.5 marks)
Better Performed
75% of marks obtained 50% of marks obtained
exam
5
Other exam
25% of marks obtained 50% of marks obtained
2. For drawing courses, there shall be only two Term examinations in a semester with
no Alternate Assessment Tool. In case of such courses a maximum of 10 marks shall
be given for day-to-day class work and a maximum of 25 marks shall be awarded to
the Term examinations taking into account the performance of both the Term
examinations giving weightage as prescribed above.
3. A maximum weightage of 5 marks will be given in the CIE for attendance in all
theory and drawing courses as indicated in 7.1.1.
6.4 Semester End Examination (SEE) in Theory and Drawing subjects:
1)
For each theory, design and/or drawing course, there shall be a comprehensive
Semester End Examination (SEE) of three hours duration at the end of each
Semester for 100 marks and reduced to 60 marks for the combined performance in
CIE & SEE purpose, except where stated otherwise in the detailed Scheme of
Instruction. Question paper setting shall be entrusted to external examiners from
the panels approved by the respective Boards of Studies.
2)
A minimum of 40 marks are to be secured exclusively in the Semester End

Examination (SEE) of theory/drawing course which shall be reduced to 24 marks
(40%) and a minimum total of 40 marks in SEE and CIE put together in a theory /
drawing course is to be secured in order to be declared as passed in that course and
for the award of the grade in the course.
6.5 Continuous Internal Evaluation (CIE) in laboratory courses:

1)
2)
The evaluation for Laboratory course is based on SEE and CIE. The CIE for 40 marks
comprises of 20 marks for day to day laboratory work, 5 marks for record
submission and 15 marks for a laboratory examination at the end of the semester.
In any semester, a minimum of 90 percent of prescribed number of experiments /

exercises specified in the syllabi for laboratory course shall be taken up by the
students. They shall complete these experiments / exercises in all respects and get
the record certified by the internal lab teacher concerned and the Head of the
Department concerned to be eligible to appear for the Final Examination in that
laboratory course.
6.6 Semester End Examination (SEE) in laboratory courses:
1)
For each laboratory course, the Semester End Examination (SEE) shall be conducted
by one internal and one external examiner appointed by the Principal and the
duration of the exam shall be for three hours. The SEE is for 100 marks which
include 15 marks for write up, 40 marks for lab experiment/exercise, 10 marks for
record, 15 marks for result analysis and 20 marks for Viva-voce. The student
performance in SEE shall be reduced to 60 marks.
2)
A minimum of 50 marks shall be obtained in SEE which shall be reduced to 30 marks

(50%) and a minimum total of 40 marks in SEE and CIE put together in a laboratory
course are to be secured in order to be declared as passed in the laboratory course
and for the award of the grade in that laboratory course.
6.7. Evaluation of term paper and Business communication & Presentation Skills Lab:
1)
A term paper is to be submitted by each student in the 7th semester which would be
a precursor to the project work to be done in the 8th semester, and Business
Communication & Presentation Skills Lab is to be taken up in the 7th semester. The
evaluation is based on CIE for 20 marks, which includes a minimum of two
seminars/presentations for 10 marks and the report submitted at the end of the
semester which is evaluated for 10 marks.
2)
The Semester End Examination (SEE) shall be conducted for 100 marks by one
internal and one external examiner appointed by the Principal. The same shall be
reduced to 30 marks. The SEE contains Viva-voce and the demonstration of the
model developed or work performed as a part of the term paper.
3)
A minimum of 25 marks shall be obtained in SEE which is reduced to 15 (50 %) and

a minimum total of 20 marks in SEE and CIE put together in the term paper are to be
secured in order to be declared as passed in the term paper and for the award of
the grade in the term paper.
6.8 Evaluation of Project:

1)
In case of the Project work, the evaluation shall be based on CIE and SEE. The CIE for
50 marks consists of a minimum of two Seminars/ presentations for 25 marks and
the Project Report submitted at the end of the semester which is evaluated for 25
marks.
2)
SEE shall be in the form of a Viva- voce and the demonstration of the thesis work for
100 marks. Viva-voce Examination in Project Work shall be conducted by one
internal examiner and one external examiner to be appointed by the Principal. A
minimum of 50 marks shall be obtained in SEE exclusively and a minimum total of
60 marks in SEE and CIE put together are to be secured in order to be declared as
passed in the Project and for the award of the grade.
6.9 A student who could not secure a minimum of 50% aggregate marks in CIE of a semester
is not eligible to appear for the Semester End Examinations conducted at the end of the
semester and shall have to repeat that semester.
NOTE : A student who is absent for any Test / Exam / Seminar / Presentation as a part of
Continuous Internal Evaluation (CIE), for any reason whatsoever, shall be deemed to
have scored zero marks in the respective component and no provision for make-up shall
be provided.
6.10 Make-up Test: A student can appear for a Make-up Test in a single theory subject of a
semester to improve marks in the Continuous Internal Evaluation (CIE/Internal marks)
subject to the following:
If the student becomes eligible to appear for the Semester End Examination (SEE) of a
semester and is unable to secure 40% internal marks in a particular theory subject due
to genuine reasons, he/she may be given an opportunity to appear for makeup test in
any one subject of that semester. The makeup test will be conducted for 40 marks and
the marks obtained in this test are final. However, the maximum mark awarded will be
16 only irrespective of the marks obtained in the makeup test. Such students have to
apply by paying a fee prescribed by the institution and submit the application along with
a letter of request indicating the genuineness of his/her candidature to be eligible for
the makeup test. Applications should be recommended by the HOD concerned and
approved by the principal.
6.11 Course Repetition: The students secured less than 40% in the Continuous Internal
Evaluation (CIE) and Semester End Examinations (SEE) may register for the course
repetition. The students have to apply to the Principal through the respective HOD by
paying prescribed fees. A student can take up a maximum of two courses in a semester
immediately after the semester end examinations of that particular semester.
The HODs concerned have to allot a teacher related to that course to conduct class
work. The minimum number of periods to be conducted should not be less than 50% of
the total prescribed periods for that course. The classes will be conducted in the
vacation period or in the weekends or in the afternoons as decided by the HOD
concerned. Teacher has to evaluate the student for his performance in CIE as per the
autonomous norms and students should appear for a semester end examination. The
pass criteria in both CIE & SEE should be as per autonomous norms.
7.0 ATTENDANCE REGULATIONS:
7.1 Regular course of study means a minimum average attendance of 75% in all the courses
of study prescribed for a semester in the curriculum, computed by considering total
number of hours / periods conducted in all courses as the denominator and the total
number of hours / periods actually attended by the student in all courses, as the
numerator.
7.1.1 A maximum of 5 marks weightage in CIE in each theory/drawing course shall be
given for those students who put in a minimum of 65% attendance in the
respective theory/drawing course in a graded manner as indicated below:
Attendance of 65% and above but less than 75%
Attendance of 90% and above
4 mark
6 mark
8 marks
10 marks
The above marks are scaled and reduced to maximum of 5 marks for the purpose
of calculating attendance weightage.
7.2 Condonation of shortage in attendance may be recommended on genuine medical
grounds, up to a maximum of 10%, provided the student puts in at least 65% attendance
as calculated in 7.1 above and provided the principal is satisfied with the genuineness of
the reasons.
7.3 A student, who could not satisfy the minimum attendance requirements, as given above,
in any semester, is not eligible to appear for the Semester End examinations and shall
have to repeat that semester.
8.0 DETENTION: A student is said to have been detained and not allowed to appear for Semester
End Examination (SEE) at the end of the semester when
8.1 The student does not have a minimum average 75% attendance or 65% attendance with
condonation in all subjects put together in that semester or the student has not scored a
minimum of 50% of marks in CIE in all the courses of that semester put together.
Such a student shall have to repeat the same semester subsequently and satisfy the
above requirements afresh to become eligible to appear for the Semester End
Examination (SEE), conducted at the end of the semester.
9.0 CONDITIONS FOR PROMOTION:
9.1 A student not detained in the first semester of a year of study shall be promoted to
second semester of that year of study.
9.2 A student shall be eligible for promotion to II year of B.Tech. Programme, if he/she is not
detained in the second semester of first year B.Tech. Programme irrespective of the
number of backlog courses in I year B.Tech.
9.3 A student shall be eligible for promotion to III year of B.Tech. Programme, if he/she is
not detained in the second semester of II year B.Tech. Programme and has passed all but
three courses of I year B.Tech. (Including laboratory courses).
9.4 A student shall be eligible for promotion to IV year of B.Tech. Programme, if he/she is
not detained in the second semester of III year B.Tech. Programme and has passed all
but three courses of II B.Tech. (Including laboratory course) and all but one course of I
B.Tech. (Including laboratory courses).
10.0 Registration: Every eligible student (not detained and promoted) has to register himself/
herself at the beginning of every semester indicating all the Courses taken up for pursuit by
him/her during that Semester.
10.1 When a student is debarred for one or more semesters, his/her registration in the
present semester is cancelled and the student is debarred from registering in future
during the debarred period.
10.2 In any case, while re-registering in any semester, he or she will have to pay the requisite
fee once again.
11.0 GRADING SYSTEM
11.1 Based on the student performance during a given semester, a final letter grade will be
awarded at the end of the semester for each course. The letter grades and the
corresponding grade points are as given in the Table.
Table: Grades & Grade Points
Grade Points
% of Marks
Grade
O
10
90% and above
A+
80% 89%
70% 79%
B+
60% 69%
50% 59%
40% 49%
Failed, 0
Less than 40%
11.2 A student who earns a minimum of 5 grade points (C grade) in a course is declared to
have successfully completed the course, and is deemed to have earned the credits
assigned to that course. However it should be noted that a pass in any course/term
paper/Project shall be governed by the rules mentioned in 6.0.
12.0 GRADE POINT AVERAGE
12.1 The Grade Point Average (GPA) will be calculated according to the formula:
GPA
C G
C
i
Where C i = number of credits for the course i,

G i = grade points obtained by the student in the course.
12.2 Semester Grade Point Average (SGPA) is awarded to candidates considering all the
courses of the semester. Zero grade points are also included in this computation.
12.3 To arrive at Cumulative Grade Point Average (CGPA), the formula is used considering the
students performance in all the courses taken in all the semesters completed up to the
particular point of time.
12.4 Example
Semester
I
I
I
I
I
I
Course
Code.
14MA101
14PH102
14CH103
14EL104
14ES105
14EG106
Credits
Grade
4
3
3
3
3
4
C
B
A
O
A+
B+
Grade
Point
5
6
8
10
9
7
Credit
Points
20
18
24
30
27
28
SGPA
CGPA
7.73
7.73
I
I
I
Total
II
II
II
II
II
II
II
II
II
Total
14CHL101
14ELL102
14WSL103
14MA201
14PH202
14CH203
14EE204
14EM205
14CP206
14PHL201
14HWL202
14CPL203
2
2
2
26
4
3
3
3
4
3
2
2
2
26
O
A
A+
10
8
9
A
B
A+
C
O
B+
A+
A
O
8
6
9
5
10
7
9
8
10
20
16
18
201
32
18
27
15
40
21
18
16
20
207
(201/26) (201/26)
7.96
7.84
(207/26) (408/52)
13.0 ELIGIBILITY FOR AWARD OF B.TECH. DEGREE: A student shall be eligible for award of the
B.Tech degree if he/she fulfils all the following conditions:
1)
2)
3)
4)
Registered and successfully completed all the components prescribed in the Programme
of study to which he/she is admitted,
Obtained CGPA greater than or equal to 5.0 (Minimum requirements for Pass),
Has no dues to the Institute, hostels, Libraries, NCC/NSS etc., and
No disciplinary action is pending against him/her.
14.0 AWARD OF CLASS: A candidate who becomes eligible for the award of B.Tech. Degree shall
be placed in one of the following Classes based on CGPA.
Table: CGPA required for award of Degree
Distinction
8.0*
First Class
7.0
Second Class
6.0
Pass
5.0
* In addition to the required CGPA of 8.0, the student must have necessarily passed all the
courses of every semester in the minimum stipulated period for the Programme.
14.1
Grade Sheet: A grade sheet (Memorandum) will be issued to each student
indicating his performance in all courses taken in that semester and also indicating
the Grades and SGPA.
14.2
Transcripts: After successful completion of the total Programme of study, a

Transcript containing performance of all academic years will be issued as a final
record. Duplicate transcripts will also be issued if required after the payment of
requisite fee. Partial transcript will also be issued up to any point of study to any
student on request and by paying the stipulated fee in force.
14.3
Candidates shall be permitted to apply for recounting/revaluation of SEE scripts

within the stipulated period with payment of prescribed fee.
14.4 The Governing Body of B.E.C (Autonomous) has to approve and recommend the same to
Acharya Nagarjuna University for the award of a degree to any student.
15.0 IMPROVEMENT OF CLASS:

15.1 A candidate, after becoming eligible for the award of the Degree, may reappear for the
Final Examination in any of the theory courses as and when conducted, for the purpose
of improving the aggregate and the class. But this reappearance shall be within a
period of two academic years after becoming eligible for the award of the Degree.
However, this facility shall not be availed of by a candidate who has taken the Original
Degree Certificate. Candidates shall not be permitted to reappear either for CIE in any
course or for Semester End Examination (SEE) in laboratory courses (including Project
Viva-voce) for the purpose of improvement.
16.0 SUPPLEMENTARY EXAMINATIONS: In addition to the Regular Final Examinations held at the
end of each semester, Supplementary Final Examinations will be conducted during the
academic year. Candidates taking the Regular / Supplementary examinations as
Supplementary candidates may have to take more than one Final Examination per day. A
student can appear for any number of supplementary examinations till he/she clears all
courses which he/she could not clear in the first attempt. However the maximum stipulated
period shall not be relaxed under any circumstances.
17.0 INSTANT SUPPLEMENTARY EXAMINATIONS: Candidates who fail in one theory course of 4th
year 2nd semester can appear for Instant Supplementary Examination conducted after
declaration of the revaluation results of the said exam.
18.0 MALPRACTICES:
The Principal shall refer the cases of malpractices in Continuous Internal Evaluation (CIE) and
Semester End Examination (SEE) to an Enquiry Committee constituted by him / her. The
Committee will submit a report on the malpractice allegedly committed by the student to the
Principal. The Principal along with the members of the Committee is authorized to award a
suitable punishment, if the student is found guilty.
19.0 ADDITIONAL ACADEMIC REGULATIONS:
19.1 Any attempt to impress upon the teachers, examiners, faculty and staff of
Examinations, bribing for either marks or attendance will be treated as malpractice.
19.2 When a student is absent for final examination, he/she is treated as to have appeared
and obtained zero marks in that component and Grade is awarded accordingly.
19.3 When a component of Continuous Internal Evaluation (CIE) or Semester End
Examination (SEE) is cancelled as a penalty, he/she is awarded zero marks in that
component.
20.0 AMENDMENTS TO REGULATIONS:
The Academic Council of Bapatla Engineering College (Autonomous) reserves the right to revise,
amend, change or nullify the Regulations, Schemes of Examinations, and/ or Syllabi or any other
matter pertained that meets to the needs of the students, society and industry without any
notice and the decision is final.
BAPATLA ENGINEERING COLLEGE : BAPATLA

(Autonomous)
SCHEME OF INSTRUCTION & EXAMINATION (Semester System)
For
Mechanical Engineering
With Effective From 2014-2015 Academic Year
First Year B.Tech., (SEMESTER I)
Code No.
14MA101
14PH102
14CH103
14EL104
Scheme of
Instruction
(Periods per week)
Subject
40
60
100
40
60
100
40
60
100
40
60
100
40
60
100
40
60
100
Engineering
Mathematics I
Engineering
Physics I
Engineering
Chemistry I
English Language and
Communication
Environmental Studies
14EG106
Engineering Graphics
14CHL101 Chemistry Lab
40
60
100
40
60
100
40
60
100
24 1 11 0
36
360
540
900
26
English Language
Laboratory
14WSL103 Workshop
TOTAL
No. of
Credits
14ES105
14ELL102
Scheme of
Examination
(Maximum marks)
Total
S Total CIE SEE
Marks
CIE: Continuous Internal Evaluation

L: Lecture
S: Self Study
SEE: Semester End Examination

T: Tutorial
P: Practical

(Autonomous)
For
First Year B.Tech., (SEMESTER II)
Code No.
Subject
Scheme of
Instruction
(Periods per week)
L
14MA201
14PH202
14CH203
14EE204
Engineering
Mathematics II
Engineering
Physics II
Engineering
Chemistry II
Basic Electrical and
Electronics
Engineering
Scheme of
Examination
(Maximum marks)
Total
T P S Total CIE SEE
Marks
No. of
Credits
40
60
100
40
60
100
40
60
100
40
60
100
14EM205
Engineering Mechanics
40
60
100
14CP206
Computer
Programming with C
40
60
100
14PHL201
Physics lab
40
60
100
40
60
100
40
60
100
24
36
360
540
900
26
14HWL202 Hardware Lab

14CPL203
Computer
Programming Lab.
TOTAL

L: Lecture
S: Self Study

T: Tutorial
P: Practical

(Autonomous)
For
Second Year B.Tech., (SEMESTER III)
Code No.
14MA301
14ME302
14ME303
14ME304
14ME305
14ME306
14MEL301
14MEL302
14CEL303
Subject
Scheme of
Instruction
(Periods per week)
No. of
Credits
40
60
100
40
60
100
40
60
100
40
60
100
40
60
100
40
60
100
Fuels & Oils Lab
40
60
100
Basic CAD Lab
40
60
100
Strength of
Materials Lab
40
60
100
36
360
540
900
26
Engineering
Mathematics-III
Mechanics of
Materials-I
Basic
Thermodynamics
Fluid Mechanics
Kinematics Of
Machines
Machine Drawing
TOTAL
Scheme of
Examination
(Maximum marks)
Total
S Total CIE SEE
Marks
23 2 10 1

L: Lecture
S: Self Study

T: Tutorial
P: Practical

(Autonomous)
For
Second Year B.Tech., (SEMESTER IV)
Code No.
Subject
Scheme of
Instruction
(Periods per week)
L
14ME403
Engineering
Mathematics-IV
Mechanics of
Materials-II
Applied
Thermodynamics
14ME404
Hydraulic Machines
14MA401
14ME402
Casting, Forming and

Welding Technology
Material Science
14ME406
&Metallurgy
Fluid Mechanics &
14CEL401 Hydraulic Machines
Lab
Computer Applications
14MEL402 In Mechanical
Engineering Lab
14MEL403 Basic Manufacturing
Processes Lab
14ME405
TOTAL
L: Lecture
S: Self Study
Scheme of
Examination
(Maximum marks)
Total
T P S Total CIE SEE
Marks
4
4
40
60
100
40
60
100
40
60
100
40
60
100
40
60
100
40
60
100
40
60
100
40
60
100
40
60
100
36
360
540
900
26
No. of
Credits
24 2

T: Tutorial
P: Practical

(Autonomous)
For
Third Year B.Tech., (SEMESTER V)
Code No.
Subject
Scheme of
Instruction
(Periods per week)
L
14ME501
14ME502
14ME503
14ME504
14ME505
14ME506
14MEL501
Professional ethics
and human values
Design of machine
elements-I
I.C.engines & gas
turbines
Metal Cutting &
Machine Tools
Operations research
Elective-I
Scheme of
Examination
(Maximum marks)
Total
T P S Total CIE SEE
Marks
40
60
100
40
60
100
40
60
100
40
60
100
40
60
100
40
60
100
40
60
100
40
60
100
40
60
100
36
360
540
900
26
I.C.engines lab
14MEL502 Machine shop

practice
14ELL503
Soft skills lab
TOTAL
No. of
Credits
24

L: Lecture
S: Self Study
Elective-I
1. Engineering economics & accountancy
2. Computer Graphics
3. Mechanics of composite materials

T: Tutorial
P: Practical

(Autonomous)
For
Third Year B.Tech., (SEMESTER VI)
Code No.
Subject
Scheme of
Instruction
(Periods per week)
L
14ME601
Machine dynamics
14ME602
Design of Machine
Elements-II
Heat transfer
14ME603
14ME604
14ME605
14ME606
14MEL601
14MEL602
14ECL603
Manufacturing
engineering
Electronics& Micro
processors
Elective II
Scheme of
Examination
(Maximum marks)
Total
T P S Total CIE SEE
Marks
1
No. of
Credits
40
60
100
40
60
100
40
60
100
40
60
100
40
60
100
40
60
100
H.T. lab
40
60
100
Cad modeling lab
40
60
100
Electronics lab
40
60
100
9 1
36
360
540
900
26
TOTAL
24

L: Lecture
S: Self Study
Elective-II
1. Operations management
2. Refrigeration and air conditioning
3. Fluid power and control systems

T: Tutorial
P: Practical

(Autonomous)
For
Code No.
14ME701
14ME702
14ME703
14ME704

Final Year B.Tech., (SEMESTER VII)
Scheme of
Scheme of
Instruction
Examination
(Periods per week)
(Maximum marks)
Subject
Total
L T P S Total CIE SEE
Marks
Industrial Engineering
and Enterpreneurship
4 0
4
40
60
100
Development
Design of Machine
4 1
5
40
60
100
Elements-III
Engineering metrology
and Mechanical
4 0
4
40
60
100
Measurements
Computer aided
4 0
4
40
60
100
Manufacturing
No. of
Credits
3
4
3
3
14ME705
ELECTIVE-III
40
60
100
14ME706
OPEN ELECTIVE
40
60
100
20
30
50
40
60
100
Business
Communication &
Presentation Skills Lab
14MEL702
CAE Lab
14ELL701
14MEL703
Design and Metrology

Lab
40
60
100
14MEL704
Term Paper
20
30
50
36
360
540
900
26
TOTAL
L: Lecture
S: Self Study
Elective-III
1. Finite element methods
2. Computational fluid dynamics
3. Mechatronics
4. Solar energy and utilization
24 2 10 0

T: Tutorial
P: Practical
Open elective
Annexure-1

(Autonomous)
For
Final Year B.Tech., (SEMESTER VIII)
Code No.
14ME801
14ME802
14ME803
14ME804
14MEPR801
14MEL802
Subject
Scheme of
Instruction
(Periods per week)
L
ELECTIVE-IV
ELECTIVE-V
Automation
Technology
Automobile
Engineering
Scheme of
Examination
(Maximum marks)
Total
S Total CIE SEE
Marks
No. of
Credits
40
60
100
40
60
100
40
60
100
40
60
100
Project Work
12
12
50
100
150
10
Automation Lab
40
60
100
1 15 1
33
250
400
650
25
TOTAL
16

L: Lecture
S: Self Study
Elective-IV
1. Power plant engineering
2. Optimization techniques
3. Computer integrated manufacturing
4. Computer aided design

T: Tutorial
P: Practical
Elective-V
1. Robotics
2. Computer aided process planning
3. Enterprise recourse planning
4. Production Planning and control
Annexure-1
LIST OF OPEN ELECTIVES
DEPARTMENT
SUBJECT NAME
SUBJECT
CODE
Industrial Pollution & Control
CH 01
Energy Engineering
CH 02
Air Pollution & Control
CE 01
Remote Sensing & GIS
CE 02
Database Management Systems
CS 01
Java Programming
CS 02
Optimization Techniques
EE 01
Non-Conventional Energy Sources
EE 02
Consumer Electronics
EC 01
Embedded Systems
EC 02
Virtual Instrumentation Using LABVIEW
EI 01
Sensors & Transducers
EI 02
Mobile Application Development
IT 01
Web Technologies
IT 02
Automobile Engineering
ME 01
Refrigeration & Air Conditioning
ME 02
Automation Technology
BR 01
Chemical Engineering.
Civil Engineering.
Computer Science &

Engineering.
Electrical & Electronics

Engineering.
Electronics & Communication

Engineering.
Electronics & Instrumentation

Engineering.
Information Technology.
Mechanical Engineering.
BOSCH REXROTH Centre
MATHEMATICS I
(Common for all branches)
14MA101
I B.Tech I Semester
Lectures
Final Exam
: 4 Periods/Week, Tutorial: 1
: 3 hours
Continuous Assessment
Final Exam Marks
: 40
: 60
UNIT - I
Matrix Algebra: Rank of a Matrix, Linear Independence, Vector Space, Solutions of Linear
Systems, Inverse of a Matrix by Gauss-Jordan Elimination, Vector Spaces, Inner Product Spaces,
Linear Transformations. Eigen Values, Eigen Vectors, Some applications of Eigen value
problems. Symmetric, Skew-Symmetric and Orthogonal Matrices.
UNIT - II
Matrix Algebra: Complex Matrices: Hermitian, Skew-Hermitian and Unitary.
Similarity of Matrices, Basis of Eigen Vectors, Diagonalization.
Differential Calculus: Rolles Theorem, Lagranges Mean Value Theorem and Taylors
Theorem (without Proofs), Taylors and, Maclaurins Series for functions of one variable.
Maxima and Minima of functions of Two Variables, Lagranges method of Multipliers.
UNIT - III
First Order Differential Equations: Basic concepts, Geometrical meaning, Separable
Differential Equations, Exact Differential Equations, Integrating Factors, Linear Differential
Equations, Bernoullis Equation, Orthogonal Trajectories of curves, Some Engineering
Applications: Growth-Decay and Newtons Law of Cooling.
UNIT - IV
Linear Differential Equations of Second Order: Homogeneous Linear Equations of Second
Order, Second Order Homogeneous Equations with Constant Coefficients, Case of Complex
Roots, Euler-Cauchy Equations, Non-Homogeneous Equations, Solution by Undetermined
Coefficients, Solution by Variation of Parameters, Applications-Modeling of Electric Circuits.
TEXT BOOK:
1. Erwin Kreyszig, Advanced Engineering Mathematics, 8th edition, John Wiley & Sons.
REFERENCE BOOK:
1. George B, Thomas, Jr. and Ross L. Finney, Calculus and Analytic Geometry, Addison
Wesley.
Lectures
Final Exam
ENGINEERING PHYSICS I
(Common to all branches)
14PH102
I B.Tech I Semester
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
OPTICS
(11 Periods)
INTERFERENCE: Two-wave interference, coherence, cosine law, Michelson interferometer
and its applications, (determination of wavelengths of monochromatic light and resolution of two
nearby wavelengths).
DIFFRACTION: Fresnel &Fraunhoffer diffraction, fraunhoffer diffraction due to single slit,
plane diffraction grating, dispersive and resolving power of grating.
POLARISATION: Introduction, Brewesters and Malus law, double refraction,Nicol prism,
quarter wave plate, half wave plate.
UNIT II
LASERS & FIBER OPTICS
(10 Periods)
LASERS: Properties of lasers, Spontaneous and stimulated emission, Population inversion,
active medium, Solid state (Ruby) laser, Gas(He-Ne) laser, semiconductor (Ga-As) laser,
Applications.
HOLOGRAPHY: Principle, recording and reproduction of holography, Applications.
FIBER OPTICS: Structure and types of optical fibers, acceptance angle, Numerical aperture,
fiber optic communication and its advantages.
UNIT III
ELECTRICITY & MAGNETISM
(10 Periods)
Gausss law in static electricity (qualitative only), Gausss law of magnetism, circulating
charges, Cyclotron-constructing, working and limitations, Hall effect and its applications,
displacement current, Maxwells equations (qualitative treatment), E M oscillations, velocity of
EM waves, energy transport and the pointing vector, radiation pressure, AC circuit containing
series LCR circuit-resonance condition.
UNIT IV
MODERN PHYSICS
(11 Periods)
Dual nature of light, de-Broglis concept of matter waves, Davison-Germer electron diffraction
experiment, Heisenbergs uncertainty experiment and applications (non-existence of electron in a
nucleus and finite width of spectral lines), one dimensional time- independent Schrdinger wave
equation, physical significance of wave function, applications of time-independent wave
equation to particle in a box(one dimensional), tunneling, the scanning tunneling microscope.
TEXT BOOKS:
1. R.K Goure and S.C. Gupta, Engineering Physics, New Delhi.
2. Halliday, Resnik, Krane, PHYSICS, John Wiley & Sons.
REFERENCE BOOKS:
1. Optics, A. Ghatak (TMH).
2. Concepts of Modern Physics, AurthurBeiser (TMG).
3. A text book of engineering physics, M.N. Avadhanulu, P.G. Kshirasagar, S.Chand& Co.,.
4. Serway and jewett, Physics for scientist and engineers with Modern physics, 6 th edition,
Tomson Brooks/Cole, Indian reprint.
ENGINEERING CHEMISTRY I
14CH103
I B.Tech I Semester
Lectures
: 4 Periods/Week
: 40
Final Exam
: 3 hours
Final Exam Marks
: 60
UNIT I
WATER TECHNOLOGY
(11 Periods)
Characteristics alkalinity types of alkalinity and determination hardness types and
estimation by EDTA method (problems); Domestic water treatment disinfection methods
(Chlorination, ozonation. UV treatment) Boiler feed water requirements disadvantages of
using hard water in boilers: Scales, Sludges, Caustic embrittlement, boiler corrosion, Priming
and foaming internal conditioning (phosphate, calgon and carbonate conditioning methods)
external conditioning demineralization process Lime Soda Process- desalination of brackish
water by electro dialysis and reverse osmosis.
UNIT II
POLYMERS:
(12 Periods)
Polymers: Definition, Polymerization, types, addition and condensation polymerization, free
radical polymerization mechanism.
Plastics: Classification, Preparation, Properties and uses of PVC, Teflon, polycarbonate,
polyurethane, nylon-6,6, PET.
Rubber: vulcanization of rubber, synthetic Rubbers: Buna-S, Buna-N and Polyurethane rubbers.
SURFACE CHEMISTRY:
Surface Chemistry: Solid surfaces, types of adsorption, Frendlich and Longmuir adsorption
isotherm, BET adsorption equip. Calculation of surface area of solid & application adsorption:
role of adsorbents in catalysis, ion-exchange adsorption and pollution abatement; classification
of colloids, Electrical & optical properties micelles, applications of colloids in industry.
UNIT III
RENWEBLE AND NON RENWEABLE ENERGY SOURCES
(11 Periods)
Thermal and Chemical energy: Introduction to solid fuels - calorific value (lower, higher)determination of calorific value(Bomb Calorimeter) - pulverized coal carbonization (Bee Haive
method - Otto Hoffman by product method)- Proximate and ultimate analysis of coal -Flow
Chart in Thermal Power Stations.- Introduction to Geo Thermal Energy-working applicationsIntroduction to Solar Cells Solar Panels-Applications-Green House Concept - wind energy
fuel cells hydrogen oxygen fuel cell batteries alkaline batteries leadacid, nickel
cadmium and lithium batteries.
UNIT IV
ENGINEERING MATERIALS
(11 Periods)
Refractories classification acidic, basic and neutral refractories properties: refractoriness,
refractoriness under load, dimensional stability, porosity, thermal spalling manufacture of
alumina, magnesite and zirconia bricks, Abrasives natural and synthetic abrasives quartz,
corundum, emery, garnet, diamond, silicon carbide and boron carbide.
Composites: definition, types, polymer matrix composites.

Lubricants mechanism of lubrication, liquid lubricants - properties: viscosity index, flash and
fire points, cloud and pour points, oiliness solid lubricants graphite and molybdenum
sulphide.
Nanomaterials: Introduction to nanochemistry preparation of few Nano materials:carbon
nanotubes, Fullerenes etc Properties of Nano materialas and their Engineering applications.
TOTAL: 45 PERIODS
TEXT BOOKS:
1. P.C.Jain and Monica Jain, Engineering Chemistry, DhanpatRai Pub, Co., New Delhi (2002).
2. S.S. Dara & Mukkati K., A text book of engineering chemistry, S.Chand & Co.Ltd., New
Delhi (2006).
3. Text Books of Engineering Chemistry, C.P. Murthy, C.V. Agarwal, A. Naidu B.S.
Publications, Hyderabad (2006).
REFERENCE BOOKS:
1. B.K.Sharma, Engineering chemistry, Krishna Prakasan Media (P) Ltd., Meerut (2001).
2. B. Sivasankar, Engineering Chemistry, Tata McGraw-Hill Pub.Co.Ltd, New Delhi (2008).
3. Enginering Chemistry, J.C. Kuriacase & J. Rajaram, Tata McGraw Hill co.,
New Delhi 1. (2004).
4. Chemistry of Engineering Meterials, R.P Mani and K.N.Mishra, CENGAGE learning.
5. Applied Chemistry A text for Engineering & Technology, Springar (2005).
6. Text Book of Engineering Chemistry, ShasiChawla, DhantpatRai Publishing Company,
NewDelhi (2008).
7. Engineering Chemistry, R. Gopalan, D. Venkatappayya, D.V. SulochanaNagarajan, Vikas
Publishers (2008).
ENGLISH LANGUAGE AND COMMUNICATION

14EL104
I B.Tech I Semester
Lectures
: 4 Periods/Week
: 40
Final Exam
: 3 hours
Final Exam Marks
: 60
Objective of the course: To impart Basic skills of communication in English in through
intensive practice to the First year student, So as to enable them to function confidently and
effectively in that language in the professional sphere of their life.
Unit 1
Grammar: This area exposes the learners to improve the standard proficiency level, avoiding
grammatical mistake in communication.
1. Tenses
2. Preposition
3. Parts of speech
Unit 2
Writing skills: This area promotes a format and well structured sentences required in
professional writing
1. Paragraph writing
2. Letter writing
3. Essay writing
Unit 3
Vocabulary: This unit offers an extensive knowledge of words and word meaning, essential for
communication and contemporary test
1. Analogies
2. Idioms and phrases and their use
3. Antonyms & Synonyms
Unit 4
Reading skills: Reading skills enable the student to turn writing into meaning and achieve the
goals of reading independently, comprehensibly and fluently
1. Reading comprehension
i.
Scanning
ii.
Skimming
iii.
Glance
TEXT BOOK:
1. Objective English for Competitive Examination (Third edition), Hari Mohan Prasad, Uma
ReniSinha, Tata McGraw Hill.
REFFRENCE BOOKS:
1. Effective Technical Communication, M.AshrafRizvi, Tata McGraw Hill.
2. Cambridge Preparation Guide for TOFEL.
3. Dictionary of Technical Terms.
4. Cambridge Advanced Learners Dictionary.
5. Cambridge Idioms Dictionary.
6. Basic Correspondence & Report Writing, Sharma, Tata McGraw Hill.
7. Business Correspondences and Report Writing, R.C.Sharma, Krishna Mohan, Tata
McGraw Hill.
Dictionary of Misspelled and Easily Confused Words, David Downing, Deborah K.Williams,
Tata McGraw Hill.
Lectures
Final Exam
ENVIRONMENTAL STUDIES
14ES105
I B.Tech I Semester
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Introduction: Definition, Scope and Importance, Need for public awareness.
Ecosystems: Introduction, types, Structure and Functions of Ecosystems, Forest, Grassland,
Desert, Aquatic (lakes, rivers and estuaries)
Biodiversity: Definition and levels of Biodiversity, Bio-geographical Classification of India,
India as a mega diversity nation and Hot Spots of Biodiversity.
Values of Biodiversity: Consumptive use, Productive use, Social, Ethical, Aesthetic and Option
values.
Threats to Biodiversity: Habitat loss, Extinction of Species, Poaching of wildlife
Conservation of Biodiversity: In-situ and Ex-situ conservation of biodiversity
UNIT II
Natural Resources: Exploitation and Related Pollution Problems
Land: Land as a resource, causes and effects of land degradation
Forest: Use of forests, causes and effects of deforestation and conservation of forests
Water: Distribution of Water Resources, floods and drought, causes, effects and control of water
pollution.
Energy: Classification of Resources, Importance of energy, causes and effects of nuclear
pollution.
Causes, Effects and Control of Air Pollution and Noise Pollution.
Solid Waste Management: Urban and Industrial wastes, Composting and Vermiculture and 3 R
- approach.
UNIT III
Sustainability: Theory and Practice, Equitable use of resources for sustainable life styles. Rain
water harvesting, Watershed management, Cloud Seeding, Acid rain, Ozone layer depletion,
Global warming, Population Growth and its Impact on environment, Green Revolution,
Resettlement and Rehabilitation program, Mining and Dams and their conflictions,
Environmental Impact Assessment
UNIT IV
Environmental acts: Water (Prevention and Control of pollution) act, Air (Prevention and
Control of pollution) act, Environmental protection act, Wild life protection act, Forest
Conservation act.
International Conventions: Stockholm Conference 1972, Earth Summit 1992 and Copenhagen
Conference 2009
Case Studies: Chipko movement, Narmada BachaoAndolan, Silent Valley Project, Madhura
Refinery and TajMahal, Chernobyl Nuclear Diaster, Ralegaon Siddhi (Anne Hazare) and Bhopal
Tragedy.
Text Book:
1. Environmental Studies by Benny Joseph,Tata McGraw-Hill Publishing Company Limited,
New Delhi.
Reference Books:
1. Text Book of environmental studies, ErachBharucha, UGC.
2. Environmental Studies, AnubhaKaushik and C. P. Kaushik.
3. A basic course in environmental studies, S. Deswal and A. Deswal, DhanapathRai& Co.
4. Essentials of environmental studies, Kurian Joseph and R.Nagendram, Pearson Education Pt
Ltd, Delhi.
5. Environmental studies, R.Rajagopalan, Oxford University Press.
6. Environmental Pollution Control Engineering, C. S. Rao, Wiley Eastern Ltd., New Age
International Ltd.,
7. Introduction to Environmental Science, Anjaneyulu Y, B S Publications
8. Principles of Environmental Studies, Manoharachary C and Jayarama Reddy P, B S
Publications.
9. Comprehensive environmental studies- JP Sharma, Laxmi Publications.
10. Environmental Science, 11th Edition Thomson Series By G Tyler Miller, Jr.
Environmental Science and Engineering by Dr. Suresh, K.Dhaneja, Publishers SK
Kataria& Sons, New Delhi-110006.
Lectures
Final Exam
ENGINEERING GRAPHICS
14EG106
I B.Tech I Semester
: 3 Periods/Week, Tutorial: 3 Continuous Assessment
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
INTRODUCTION: Introduction to Drawing instruments and their uses, geometrical
construction procedures
(6)
CURVES: Conic sections general construction methods for ellipse, parabola and hyperbola.
Other methods to construct ellipse only, cycloid, involute of a circle
(12)
UNIT II
METHOD OF PROJECTIONS: Principles of projection - First angle and third angle
projection of points. Projection of straight lines.Traces of lines.
(18)
UNIT III
PROJECTIONS OF PLANES : Projections of plane figures: circle, square, rhombus,
rectangle, triangle, pentagon and hexagon.
(12)
UNIT IV
PROJECTIONS OF SOLIDS: Projections of Cubes, Prisms, Pyramids, Cylinders and Cones
with varying positions.
(15)
UNIT V
ISOMETRIC PROJECTIONS: Isometric Projection and conversion of Orthographic views
into isometric views. (Treatment is limited to simple objects only).
(9)
ORTHOGRAPHIC PROJECTIONS: Conversion of pictorial views into Orthographic views.
(Treatment is limited to simple castings).
(12)
TEXT BOOK:
1. Engineering Drawing by N.D. Bhatt & V.M. Panchal. (Charotar Publishing House,
Anand). (First angle projection)
REFERENCE BOOK:
1. Engineering Drawing by Dhananjay A Jolhe, Tata McGraw hill publishers
2. Engineering Drawing by Prof.K.L.Narayana& Prof. R.K.Kannaiah.
Lectures
Final Exam
1.
CHEMISTRY LAB I
14CHL101
I B.Tech I Semester
: 3 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
LIST OF EXPERIMENTS
Introduction to Chemistry Lab (the teachers are expected to teach fundamentals like
Primary, Secondary Standard Solutions , Normality, Molarity, Molality etc and
laboratory ware used, error ,accuracy, precision, Theory of indicators, use of volumetric
titrations.
2.
Volumetric Analysis:
a.
Estimation of acid content in un-known solution
b.
Estimation of Iron by Dichrometric method
c.
Estimation of Copper by Iodometric method
d.
Estimation of available chlorine in bleaching powder
3.
Analysis Of Water: Estimation of :

a.
TOTAL HARDNESS BY EDTA METHOD
b.
TURBIDITY
c.
CONDUCTIVITY
d.
pH
e.
TOTAL DISSOLVED SALTS
f.
SALANITY
g.
ALKALINITY
h.
DISSOLVED OXYGEN
4.
Bacterial Count: The student has to get his water sample and the teacher has to explain
the analysis and the results are to be compared with the INDIAN STANDRDS.
5.
Construction Of Galvanic Cell: Based on the position of the metals in the electrochemical
series a model electrochemical Cell is constructed and the values are determined and
effect of metal ion concentration, Temperature etc. on emf are calculated.
TEXT BOOKS:
1. Practical Engineering Chemistry, K. Mukkanti, etal, B.S. Publications, Hyderabad.
2. Inorganic quantitative analysis, Vogel.
REFERENCE BOOKS:
1. Text Book of engineering chemistry, R. N. Goyal and HarrmendraGoel.
2. A text book on experiments and calculation Engg., S.S. Dara.
3. Instrumental methods of chemical analysis, Chatwal, Anand, Himalaya publications.
Lectures
Final Exam
ENGLISH LANGUAGE LAB

14ELL102
I B.Tech I Semester
: 3 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
OBJECTIVES
This course enables the students to expedite the process of improving communication in both
formal and in formal situation. A special attention has been paid to the needs of competitive and
current demands.
Introduction to communication: Difference between communication and communication
skills, Types of communication, Barriers to communication.
Introduction to skills: Listening skills, writing skills, Reading skills, and Speaking skills.
Pronunciation drills: Phonetics, British English and American English.
Conversational skills: Dialogue, Telephonic Interaction.
Professional writings & skills: Resumes, Reports, Business letters and Interview skills.
Practical: Extempore Debates, Group discussion, and Oral presentation.

RECOMMENDED SOFTWARES:
Digital Language Lab - Networking Software, HiClass Software.
English Language Listening, Speaking Reading, Writing Skills: A lania series English
Mastery, Levels A, B (Set of 2 CDs), English Discoveries (Set 0f 12 CDs).
English Grammar / Pronunciation: Live Action English Interactive, Speech Solutions
Dictionaries: Cambridge Advanced Learners, Oxford Genie & Advanced
Writing: Easy writer, Creative writing
Professional English: Telephonic English, English in mind
English for ETS: Barrons, TOEFL Mastery, IELTS, GRE
Lectures
Final Exam
WORKSHOP
14WSL103
I B.Tech I Semester
: 3 Periods/Week
: 3 hours
Final Exam Marks
1. Carpentry
a. Half Lap joint
b. Dovetail joint
c. Mortise &Tenon joint
2. Welding using electric arc welding process/gas welding

a. Lap joint
b. Tee joint
c. Butt joint
3. Sheet metal operations with hand tools

a. Trapezoidal tray
b. Funnel
c. T-joint
4. House wiring
a. To control one lamp by a single switch
b. To control two lamps by a single switch
c. Stair-case wiring
: 40
: 60
MATHEMATICS II
14MA201
I B.Tech. II Semester
Lectures
Final Exam
: 4 Periods/Week, Tutorial: 1
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Fourier Series: Periodic Functions, Trigonometric Series, Fourier Series, Functions of Any
Period P = 2L, Even and Odd Functions, Half Range Expansions, Complex Fourier Series,
Approximation by Trigonometric polynomials.
UNIT II
Laplace Transforms: Laplace Transform, Inverse Transform, Linearity, Shifting, Transforms of
Derivatives and Integrals, Differential Equations, Unit Step Function, Second Shifting Theorem,
Diracs Delta Function, Convolution theorem (without proof).
UNIT III
Integral Calculus: Evaluation of double integrals (Cartesian & Polar), Changing the order of
integration, Evaluation of triple integrals, Applications of triple integrals to find area and
volume.
UNIT IV
Vector calculus: Scalar and vector point functions, Gradient of a scalar field, Directional
derivative, Divergence of a vector field, curl of a vector field, Line integrals, Line integrals
independent of path, Greens theorem in the plane (without proof), Surface integrals, Triple
integrals, Divergence theorem of Gauss (without proof), Applications to Engineering problems,
Stokes theorem(without proof).
TEXT BOOK:
1. Advanced Engineering Mathematics, Erwin Kreyszig, 8th edition, John Wiley & Sons.
REFERENCE BOOKS:
1. Advanced Engineering Mathematics, Peter V. ONeil, Thomsons Brooks/Cole.
2. Advanced Calculus, Murray R Spiegel, Schaums outline series.
Prerequisites: Elementary integral calculus, Linear differential equations of second and higher
order, Elementary calculus.
Text Book:
1. Advanced Engineering Mathematics, Erwin Kreyszig, 8th edition, John Wiley & Sons.
ENGINEERING PHYSICS II
14PH202
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT - I
Electron theory of solids & semiconductor physics
(10 periods)
Electron theory of solids:Failure of classical free electron theory, quantum free electron theory,
Fermi-Dirac distribution and its temperature dependence, Kronig-Penny model (Qualitative),
effective mass of electron, concept of hole.
Semiconductor physics: Classification of semiconductors, P-N junction diode and its
characteristics, carrier concentration in P and N type semiconductors, Equation of continuity.
UNIT II
Magnetic, Dielectric and Ferro-electric materials
(10 periods)
Origin of magnetic moment of an atom, Bohr magneton, Weiss theory of Ferro magnetism
(Qualitative), Hysteresis curve, soft and hard magnetic materials, ferrites and its applications.
Dielectric materials, Types of polarizations, internal field (qualitative), Classius Mossetti
equation, Frequency dependence of polarization, Ferroelectrics and its applications.
UNIT III
Advanced materials
(12 periods)
Nano-materials: Introduction to nano-materials, Fabrication of nano-materials and carbon nano
tubes (CVD and sol-gel), physical and chemical properties of nano materials, Applications of
nano materials (Structural point, Storage of information, Strength point)
Superconductivity:Meissner effect, types of superconductors, elements of BCS theory,
Applications of superconductors.
Opto-electronic devices: Working and applications of solar cell,LED, LCD, Photo Diode.
UNIT IV
Analytical techniques
(10 periods)
Nuclear techniques: Radio isotopes and its applications (Medical and Industrial), GM-counter,
scintillation counter.
Ultrasonics: Properties of ultrasonics, General applications of ultrasonics.
Medical applications: Cardiology, Neurology, Ultrasonic imaging.
NDT: Pulse echo technique, cavitation effect, Time of flight diffraction technique.
Structure determination: Crystal planes, Braggs law, structural analysis of crystal using XRay powder diffraction method.
TEXT BOOKS:
1. Engineering physics,M.R.Sreenivasan, Newage International Publication.
2. Engineering Physics, Palaniswamy, ScitechPulishers.
3. Solid State Physics, Dekkar.
REFERENCE BOOKS:
1. Material Science for scientists and Engineers, Srinivasan&Srivastava, TMH Publishers.
2. A text book of engineering physics, M.N.Avadhanulu& P. Krushisagar, S.Chand Pub.
3. Material Science, VijayaRangarajan.
Lectures
Final Exam
ENGINEERING CHEMISTRY II
14CH203
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
(11 Periods)
ELECTROCHEMISTRY
Electrochemical cells reversible and irreversible cells EMF measurement of emf Single
electrode potential Nernst equation (problem) reference electrodes Standard Hydrogen
electrode -Calomel electrode Ion selective electrode glass electrode and measurement of pH
electrochemical series significance potentiometer titrations (redox - Fe+vs dichromate and
precipitation Ag+ vs CI-titrations) and conduct metric titrations (acid-base HCI vs, NaOH)
titrations.
UNIT - II
(11 Periods)
CORROSION AND CORROSION CONTROL
Chemical corrosion Pilling Bedworth rule electrochemical corrosion different types
galvanic corrosion differential aeration corrosion factors influencing corrosion corrosion
control sacrificial anode and impressed cathodic current methods corrosion inhibitors
protective coatings paints constituents and functions metallic coatings electroplating (Au)
and electroless (Ni) plating.
GREEN CHEMISTRY: Introduction-concepts-Engineering Applications.
UNIT III
(12 Periods)
LIQUID AND GASEOUS FUELS AND COMBUSTION: Petroleum based: Petroleum
processing and fractions cracking catalytic cracking and methods-knocking and antiknocking Agents octane number and cetane number synthetic petrol Fischer Tropsch and
Bergius processes.
Gaseous fuels- water gas, producer gas, CNG and LPG, Flue gas analysis Orsat apparatus
theoretical air for combustion.
PHASE RULE AND ALLOYS: Statement and explanation of terms involved one component
system water system condensed phase rule construction of phase diagram by thermal
analysis simple eutectic systems (lead-silver system only) alloys importance, ferrous alloys
nichrome and stainless steel heat treatment of steel, non-ferrous alloys brass and bronze.
UNIT IV
(11 periods)
ANALYTICAL TECHNIQUES: Beer-Lamberts law (problem) UV-visible spectroscopy
and IR spectroscopy principles instrumentation (problem) (block diagram only) estimation
of iron by colorimetry flame photometry principle instrumentation (block diagram only)
estimation of sodium by flame photometry atomic absorption spectroscopy principles
instrumentation (block diagram only) estimation of nickel by atomic absorption spectroscopy.
TOTAL: 45 PERIODS
TEXT BOOKS:
1. P.C.Jain, Monica Jain, Engineering Chemistry, DhanpatRai Pub, Co., New Delhi (2002).
2. S.S.Dara, Mukkanti K.,A text book of Engineering Chemistry, S.Chand& Co., Ltd., New
Delhi (2006).
3. B. Sivasankar, Engineering Chemistry, Tata McGraw-Hill Pub.Co.Ltd, New Delhi (2008).

REFERENCE BOOKS:
1. B.K.Sharma, Engineering Chemistry, Krishna Prakasan Media (P) Ltd., Meerut (2001).
2. Enginering Chemistry, J.C.Kuriacase&J.Rajaram, Tata McGraw Hill, New Delhi (2004).
3. Chemistry of Engineering Materials, R.P Mani, K.N.Mishra, CENGAGE learning.
4. Applied Chemistry - A text for Engineering & Technology, Springar (2005).
5. Text Book of Engineering Chemistry, ShasiChawla, DhantpatRai Publishing Company,
NewDelhi (2008).
6. Engineering Chemistry, R. Gopalan, D. Venkatappayya, D.V. SulochanaNagarajan, Vikas
Publishers (2008).
BASIC ELECTRICAL AND ELECTRONICS ENGINEERING

14EE204
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Basic Concepts of Electric Circuits: Introduction, Electric Current, Ohms Law, Work, Power,
and Energy, Dynamically Induced EMF and Statically Induced EMF, Self-induced EMF and
Mutually Induced EMF, Self-inductance of a Coil, Mutual Inductance, Energy Stored in a
Magnetic Field, Electrical Circuit Elements, Energy Stored in a Capacitor, Capacitor in Parallel
and in Series.
DC Networks and Network Theorems: DC Network Terminologies, Voltage and Current
Sources, Series Parallel Circuits, Voltage and Current Divider Rules, Kirchhoffs Laws,
Maxwells Mesh Current Method, Nodal Voltage Method (Nodal Analysis), Network Theorems
(Superposition Theorem, Thevenins Theorem, Nortons Theorem).
UNIT II
AC Fundamentals: Introduction, Generation of Alternating Voltage in an Elementary
Generator, Concept of Frequency, Cycle, Time Period, Instantaneous Value, Average Value, and
Maximum Value, Sinusoidal and Non-sinusoidal Wave Forms, Concept of Average Value and
Root Mean Square (RMS) Value of an Alternating Quantity, Analytical Method of Calculation
of RMS Value, Average Value, and Form Factor, RMS and Average Values of Halfwave
rectified Alternating Quantity, Concept of Phase and Phase Difference.
Transformers: Introduction, Basic Principle and Constructional Details, EMF Equation.
UNIT III
Semiconductor Devices: Introduction, Review of Atomic Theory, Binding Forces Between
Atoms in Semiconductor Materials, Extrinsic Semiconductors, Semiconductor Diodes;
Voltampere Characteristic of a Diode, An Ideal Diode, Diode Parameters and Diode Ratings,
Zener Diode; Zener Diode As Voltage Regulator, Zener Diode As a Reference Voltage, Bipolar
Junction Transistors; Working of a n-p-n Transistor, Working of a p-n-p Transistor, Transistor
Configurations, Transistor As an Amplifier, Transistor As a Switch, Rectifiers and Other Diode
Circuits.
Rectifiers: Introduction, Half-Wave, Full wave Rectifiers and their analysis, Comparison of
Half-Wave and Full-Wave Rectifiers.
UNIT III
Digital Electronics: Introduction, Number System, Octal Number System, Hexadecimal
Number System, Application of Binary Numbers in Computers, Logic Gates, Boolean Algebra,
De Morgans Theorem, Combinational Circuits, Simplification of Boolean Expressions Using
De Morgans Theorem.
Integrated Circuits: Introduction, Fabrication of Monolithic ICs, Hybrid Integrated Circuits,

Linear and Digital ICs.
TEXT BOOK: Basic Electrical and Electronics Engineering, S.K. Bhattacharya, Pearson
Publications
REFERENCE BOOKS:
1. Basic Electrical, Electronics and Computer Engineering, Muthusubramanian R, Salivahanan
S and Muraleedharan K A, Tata McGraw Hill, Second Edition, (2006).
2. Basics of Electrical and Electronics Engineering, Nagsarkar T K and Sukhija M S, Oxford
press University Press.
Lectures
Final Exam
ENGINEERING MECHANICS I
14EM205
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Concurrent Forces in a Plane: Principles of statics composition and resolution of forces
equilibrium of concurrent forces in a plane Method of moments.
Parallel Forces in a Plane:
Two parallel forces general case of parallel forces in a plane center of parallel forces
Centroids of composite plane figures and curves-Distributed force in a plane.
General Case of Forces in a Plane: Composition of forces in a plane Equilibrium of forces
in a plane Plane trusses: methods of joints.
UNIT II
Forces in space: Concurrent forces in space: method of projections parallel forces in space.
Friction: Characteristics of friction problems involving dry friction.
Principle of Virtual Work: Equilibrium of Ideal systems.
UNIT III
Rectilinear Translation: Kinematics of rectilinear motion principles of dynamics Differential
equations of rectilinear motion DAlemberts principle momentum and impulse work and
energy ideal systems: conservation of energy.
Curvilinear Translation:
Kinematics of curvilinear motion Differential equations of curvilinear motion DAlemberts
principle Work and Energy.
UNIT IV
Moments of Inertia of Plane Figures: Moment of inertia of a plane figure with respect to an
axis in its plane Moment of Inertia with respect to an axis perpendicular to the plane of
the figure Parallel axis theorem.
Moments of Inertia of Material Bodies: Moment of inertia of rigid body Moment of
inertia of a lamina Moments of inertia of three dimensional bodies.
Rotation of a Rigid Body about a Fixed Axis: Kinematics of rotation Equation of motion for
a rigid body rotating about a fixed axis DAlemberts principle.
TEXT BOOKS
1. Engineering mechanics by S. Timoshenko and D. H.Young Mc Graw-Hill International
edition (For concepts and symbolic problems)
2. Engineering mechanics statics and dynamics by A.K. Tayal Umesh publication, Delhi (For
numerical problems using S.I. system of units)
REFERENCE BOOKS:
1.Vector mechanics for engineers statics and dynamic s by Beer and Johnston, Tata
Mc Graw-Hill publishing company, New Delhi
2. Engineering mechanics statics and dynamics by R. C. Hibbeler and Ashok Gupta Pearson (For numerical problems using S.I. system of units)
Lectures
Final Exam
COMPUTER PROGRAMMING WITH C

(Common to all Branches)
14CP206
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Introduction:
Computer Fundamentals: Computer and its components, hardware/software, algorithm,
characteristics of algorithms, flowchart, symbols used in flowchart, history of C, basic structure
of a C program.
C Tokens: Character set, variables, keywords, data types and sizes, type qualifiers, numeric
constants and their forms of representation, character constants, string constants, declaration and
initialization of variables.
Operators & Expressions: Arithmetic operators and expressions, type-conversion rules,
coercion, assignment operators and expressions, increment and decrement operators, conditional
operator, statements, preprocessor directives, input/ output functions and other library functions.
Relational operators and expressions, boolean operators and expressions, operator precedence
and associativity.
Control Statements: if-else statement, else-lf statement and switch statement.
Programming Exercises for Unit I :
C-expressions for algebraic expressions, evaluation of arithmetic and boolean expressions.
Syntactic errors in a given program, output of a given program, values of variables at the end of
execution of a program fragment, filling the blanks in a given program. Programs using
Scientific and Engineering formulae.Finding the largest of the three given numbers.Computation
of discount amount on different types of products with different discount percentages. Finding
the class of an input character, finding the type of triangle formed with the given sides,
computation of income-tax, computation of electricity bill and conversion of lower case
character to its upper case.
UNIT II
Control Statements: while loop, for loop, do while loop, nested Control statements, break and
continue statements.
Arrays: One-Dimensional numeric and character arrays and Two-Dimensional numeric and
character arrays.
Programming Exercises for Unit - II:
To print the sum of the digits of a given number and to display the image of a given number.To
find whether a given number is prime, printing Fibonacci sequence and to find prime factors of a
given number.To print graphic patterns of symbols and numbers and computation of statistical
parameters of a given list of numbers.To find the length of a string, compare strings, reverse a
string, copy a string and to find whether the given string is palindrome or not. Transpose of a
matrix, product and sum of matrices and sorting of names using arrays.
UNIT III
Functions: Function definition, parameter passing mechanisms and simple recursion.
Scope & extent: Scope rules and storage classes.
Pointers and Dynamic Memory Allocation: Pointer variables, pointer arithmetic, dynamic
memory allocation, array of pointers, command line arguments, passing pointer variables as
parameters to functions.
Programming Exercises for Unit - III:
Functions - Insertion sort, Linear search. Recursive functions to find factorial &GCD(Greatest
Common Divisor), string operations using pointers and pointer arithmetic and dynamic memory
allocation. Swapping two variable values. Sorting a list of names using array of pointers and
command line arguments.
UNIT IV
Structures: Structures, array of structures, pointers to structures, unions and difference between
structure and union.
Files: File handling functions for input and output.
Programming Exercises for Unit - IV:
Operations on complex numbers, matrix operations with the matrix and the size of the matrix as
a structure, sorting a list of student records on register number using array of pointers and to read
an input file of marks and generate a result file.
TEXT BOOK:
1. Byron Gottfried, Programming with C, Schaum's Outline series.
REFERENCE BOOKS:
1. Kernighan BW and Dennis Ritchie M, C programming language, 2nded, Prentice Hall.
2. Yashavant P. Kanetkar, Let us C, BPB Publications.
3. E.Balagurusamy, Programming in ANSI C, 4thed, Tata Mcgraw-Hill.
4. Herbert Schildt, C: The Complete Reference, 4th edition, Tata Mcgraw-Hill.
Lectures
Final Exam
PHYSICS LAB I
14PHL201
: 3 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
LIST OF EXPERIMENTS
1. Determination of acceleration due to gravity at a place using compound pendulum.
2. Study the variation of intensity of magnetic field along the axis of a circular coil using
Stewart-Gees apparatus.
3. Determination of thickness of thin wire using air wedge interference bands.

4. Determination of radius of curvature of a Plano convex lens by forming Newtons rings.
5. Determination of wavelengths of mercury spectrum using grating normal incidence method.

6. Determination of dispersive power of a given material of prism using prism minimum
deviation method.
7. Draw the resonant characteristic curves of L.C.R. series circuit and calculate the resonant
frequency.
8. Draw the characteristic curves of a photocell and calculate the maximum velocity of electron.
9. Verify the laws of transverse vibration of stretched string using sonometer.

10. Determination of numerical aperture of an optical fiber.
HADWARE LAB I
14HWL202
Lectures
Final Exam
: 3 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
LIST OF EXPERIMENTS
1. Identification and testing of various electronic components. (Resistors, Inductor,

Capacitor, Transistor, ICs and Bread board)
2. Study of Oscilloscope, Function generator, Power supply and Multi meter.
3. KCL & KVL verification for simple circuits on Bread board.
4. Study of Ceiling fan.
5. Study of Florescent lamp.
6. 6.Study of Single Phase Transformer.
7. 7.Identifying all parts of computers.
8. 8.Install and Uninstall system and application software.
9. Assembling a Computer.
10. Connecting computers in a network.
Lectures
Final Exam
COMPUTER PROGRAMMING LAB

(Common to all Branches)
14CPL203
: 3 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
LIST OF PROGRAMS
1. A program for electricity bill taking different categories of users, different slabs in each
category. (Using nested if else statement).
Domestic Customer:
Consumption Units
Rate of Charges(Rs.)
0 200
0.50 per unit
201 400
100 plus 0.65 per unit
401 600
601 and above
Commercial Customer:
Consumption Units
Rate of Charges(Rs.)
0 50
0.50 per unit
100 200
201 300
301 and above
2. Write a C program to evaluate the following (using loops):
a) 1 + x2/2! + x4 / 4!+ upto ten terms
b) x +x3/3! + x5/5!+ upto 7 digit accuracy
3. Write a C program to check whether the given number is
a) Prime or not.
b) Perfect or Abundant or Deficient.
4. Write a C program to display statistical parameters (using one dimensional array).
a) Mean
b) Mode
c) Median
d) Variance.
NOTE: Use functions for each subtask in the following programs
5. Write a C program to read a list of numbers and perform the following operations
a) Print the list.
b) Delete duplicates from the list.
c) Reverse the list.
6. Write a C program to read a list of numbers and search for a given number using Binary
search algorithm and if found display its index otherwise display the message Element not
found in the List.
7. Write a C program to read two matrices and compute their sum and product.
8. A menu driven program with options (using array of character pointers).

a) To insert a student name
b) To delete a name
c) To print the names
9. Write a C program to read list of student names and perform the following operations
a) To print the list of names.
b) To sort them in ascending order.
c) To print the list after sorting.
10. Write a C program that consists of recursive functions to
a) Find factorial of a given number
b) Solve towers of Hanoi with three towers ( A, B & C) and three disks initially on
tower A.
11. A Bookshop maintains the inventory of books that are being sold at the shop. The list
includes details such as author, title, price, publisher and stock position. Whenever a
customer wants a book the sales person inputs the title and the author and the system
searches the list and displays whether it is available or not. If it is not an appropriate message
is displayed, if it is then the system displays the book details and request for the number of
copies required ,if the requested copies are available the total cost of the requested copies is
displayed otherwise the message required copies not in stock is displayed. Write a program
for the above in structures with suitable functions.
12. Write a C program to read a data file of students records with fields( Regno, Name,
M1,M2,M3,M4,M5) and write the successful students data (percentage > 40% ) to a data file.
Lectures
Final Exam
MATHEMATICS-III
14MA301
II Year B.Tech. (Mech) Third Semester
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT-I
Fourier integrals: From Fourier series to the Fourier integral, Application of the Fourier
integral, Fourier Cosine and Sine integral, Evaluation of integrals, Fourier cosine and sine
Transforms: Fourier Cosine Transforms, Fourier Sine Transforms, Linearity, Transforms
of Derivatives, Fourier Transform: Complex form of the Fourier integral, Fourier
Transform and its inverse, Linearity. Fourier Transform of Derivatives, Convolution.
UNIT-II
Partial differential equations: Basic concepts, Modeling-Vibrating string, Wave
Equation
Separation of Variables Use of Fourier series, DAlemberts Solution of the Wave
Equation, Heat Equation-Solution Fourier series, Steady-State Two-Dimensional Heat
Flow
UNIT-III
Numerical Methods in general: Introduction, Solution of Equations by Iteration,
Newtons Method for Solving Equations f(x) = 0, Convergence of Newtons method,
Interpolation:Lagrange interpolation, Newtons divided difference interpolation, Equal
spacing: Newtons forward Difference formula, Newtons Backward Difference
formula, Inverse interpolation, Numerical integration and Differentiation: Trapezoidal
Rule, Error Bounds and Estimate for the Trapezoidal Rule, Simpsons Rule of
integration, Error of Simpsons rule
UNIT-IV
Numerical methods in linear algebra: Linear Systems: Gauss Elimination, LU
Factorization, Gauss-Seidel iteration Method, Method of least Squares, Methods of First
order Differential Equations: Eulers method, Runge-Kutta methods, Methods for Elliptic
Partial Differential Equations: Laplace equation, Poisson equation
TEXT BOOK:
1.Advanced Engineering Mathematics, Erwin Kreyszig, 8th edition, John Wiley &
Sons.
REFERENCE BOOKS:
1.Advanced Engineering Mathematics, Peter V. ONeil, Thomsons Brooks/Cole.
MECHANICS OF MATERIALS- I
14ME302
Lectures
Final Exam
: 4 Periods/Week,Tutorial: 1
: 3 hours
Final Exam Marks
: 40
: 60
UNIT-I
TENSION, COMPRESSION AND SHEAR: Introduction to Mechanics of materials, normal
stress and strain, stress strain diagram for mild steel, elasticity and plasticity, linear elasticity,
Hookes law and Poissons ratio, shear stress and strain, volumetric strain and bulk modulus,
allowable stresses and allowable loads.
(9)
AXIALLY LOADED MEMBERS: Introduction, changes in lengths of axially loaded members,
changes in lengths under non uniform conditions.
(6)
UNIT-II
STATICALLY INDETERMINATE AXIALLY LOADED MEMBERS: Statically indeterminate
structures, thermal effects, misfits and pre strains, strain energy
(8)
TORSION:Introduction, torsion of circular bars, non uniform torsion, relationship between E and
G, transmission of power by circular shafts, strain energy in torsion.
(7)
UNIT-III
SHEARING FORCE AND BENDING MOMENT: Introduction, Types of Beams, Loads and
Reactions. Shearing force and bending moment, relationships between loads, Shear forces and
bending moment s, S.F. and B.M. diagrams.
(15)
UNIT-IV
STRESSES IN BEAMS: Introduction, normal strains and stresses in beams. Shear stresses in
beams of rectangular cross section, shear stresses in beams of circular cross section.
(8)
ANALYSIS OF STRESS AND STRAIN: Introduction, plane stress, principal stresses and
maximum shear stresses, Mohrs circle for plane stress, Hookes law for plane stress.
(7)
Text Books:
1. Mechanics of Materials by James M Gere
Reference Books:
1.Strength of materials by G.H. Ryder: MacMillan India Ltd. publishers.
2.Mechanics of Materials by Beer and Johnston
3.Strength of Materials by L.S.Srinath
4.Applied strength of materials by Robort L.Mott
BASIC THERMODYNAMICS
14ME303
II Year B.Tech.(Mech) Third Semester
Lectures
: 4 Periods/Week, Self study:1
: 40
Final Exam
: 3 hours
Final Exam Marks
: 60
UNIT I
FUNDAMENTAL CONCEPTS AND DEFINITIONS: Introduction, Macroscopic and
microscopic points of view, Thermodynamic system and control volume, Perfect gases,
properties and state of a substance, Thermodynamic equilibrium and Quasi-static Process,
thermodynamic path, cycle, Zeroth law of thermodynamics, concept of temperature.
(8)
WORK AND HEAT: Definitions and units, Work done at the moving boundary of a system,
work done in various non-flow processes, comparison of heat and work.
(7)
UNIT II
FIRST LAW OF THERMODYNAMICS FOR NON-FLOW SYSTEMS: First law for a
system undergoing a cycle and for a change in state of system, internal energy and enthalpy,
constant volume and constant pressure specific heats and their relation to internal energy and
enthalpy of ideal gases.
(7)
FIRST LAWOF THERMODYNAMICS FOR FLOW SYSTEMS: Control mass and control
volume, first law of thermodynamics for a control volume, Steady flow energy equation and its
application to engineering equipment.
(8)
UNIT III
SECOND LAW OF THERMODYNAMICS: Limitations of first law, PMM of first kind, Heat
engines and Refrigerators, Statements of Second law, PMM of second kind, reversible and
irreversible processes, factors that render a process irreversible, Carnot cycle and Carnot
theorems, Thermodynamic temperature scale.
(6)
ENTROPY: Inequality of Classius, Entropy change in reversible process, T-ds relations,
Entropy change of a system during an irreversible process, Principle of increase of entropy,
Applications, Entropy change of an ideal gas, Availability, Maximum work.
(9)
UNIT IV
GAS POWER CYCLES: Air standard Carnot cycle, Otto cycle, Diesel cycle, Dual Combustion
cycle and Brayton cycle, Air standard efficiency and MEP.
(7)
PURE SUBSTANCE: Definition, process of steam generation, P-v, T-s and h-s diagrams,
properties of saturated and superheated steam, Use of Steam Tables, Mollier chart.
(8)
TEXT BOOKS:
1. Engineering Thermodynamics- P.K.Nag, TMH, New Delhi.
2. Thermal Science and Engineering- D.S.kumar, S.K.Kataria publ, New Delhi.
3. ThermodynamicsRajput, Laxmi Publ, New Delhi.
REFERENCE BOOKS:
1. Fundamentals of Engineering Thermodynamics-Rathakrishnan-PHI, New Delhi.
2. Thermodynamics -- J.P.Holman, MGH, New York.
3. Engineering ThermodynamicsCengel & Boles, TMH
FLUID MECHANICS
14ME304
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
INTRODUCTION: Definition of fluid, Properties of a fluid density, specific weight, specific
gravity, viscosity, compressibility, surface tension, capillarity, vapor pressure, Classification of
fluid
(6)
FLUID STATICS: Pressure, variation of pressure in a fluid, measurement of pressure simple
and differential manometers, pressure head, Pascals law, Total pressure and center of pressure
on plane surfaces, Buoyancy and Metacentric height.
(9)
UNIT II
FLUID KINEMATICS: Velocity and acceleration of fluid particle, types of fluid flow,
Description of flow pattern, Rotational and irrotational flows, velocity potential, stream function,
flownet, continuity equation in Cartesian coordinates.
(7)
FLUID DYNAMICS: Introduction, Eulers equation of motion, Bernoullis equation, Pitot tube,
venturimeter, orifice meter, orifice- various coefficients of an orifice.
(8)
UNIT III
IMPULSE MOMENTUM EQUATION: Impulse momentum Principle, Equation and
Applications - Force on pipe bend, jet propulsion of orifice tanks and ships.
(3)
FLOW THROUGH PIPES: Types, Reynolds experiment, laws of fluid friction, DarcyWiesbach equation, minor losses, hydraulic gradient & total energy lines, pipes in series and
parallel, transmission of power through a pipe, water hammer, Laminar flow through a circular
pipe, Hagen-Poiseulle law, emptying of tanks with uniform cross section.
(12)
UNIT IV
BOUNDARY LAYER CONCEPTS: introduction, boundary layer thickness, displacement
thickness, momentum thickness, energy thickness, boundary layer growth on a flat plate,
separation of boundary layer.
(6)
INTRODUCTION TO COMPRESSIBLE FLUID FLOW: Equation of state, Gas laws,
Equation of Continuity, Equation of motion and Equation of Energy, compressible flow regimes,
Mach number, Mach cone, Shock waves, Stagnation point and properties, area velocity
relationship for compressible fluid flow.
(9)
TEXT BOOKS:
1. Hydraulics and fluid mechanics -P.N. Modi & S.M.Seth, Standard Book House, New Delhi.
2. Fluid Mechanics and Fluid machines Agarwal, TMH.
REFERENCE BOOKS:
1. Fluid Mechanics and hydraulic machines-R.K.Bansal
2. Fluid mechanics and fluid power engineering - D.S.Kumar, SK Kataria & Sons, New Delhi.
3. Fluid mechanics including Hydraulic machines - A.K.Jain.
4. Fluid Mechanics-K.L.Kumar
KINEMATICS OF MACHINES
14ME305
Lectures
Final Exam
: 4 Periods/Week, Tutorial:1
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
INTRODUCTION : Mechanisms and machines, Rigid and resistant bodies, Link, Kinematic
pair, Degrees of Freedom, Classifications of Kinematic pairs, kinematic-chain, Linkage,
Mechanism, and structure, Classification of mechanisms, Equivalent Mechanisms, Four - Link
(bar) Mechanism, Inversions of Slider - Crank Chain, Double Slider Chain.
(7)
VELOCITY ANALYSIS: Introduction, Absolute and Relative Motion, Vectors, Addition and
subtraction of Vectors, Motion of a Link, Four Link Mechanism, Angular Velocity of Links,
Velocity of Rubbing, Slider - Crank Mechanism, Crank and Slotted Lever Mechanism.
(8)
UNIT II
Instantaneous centre, Notation, Number of I - Centres, Kennedy's theorem, Locating I - Centres,
Angular velocity by I - Centre Method.
(5)
ACCELERATION ANALYSIS : Acceleration, Four-Link Mechanism, Angular acceleration of
Links, Acceleration of Intermediate and offset points, slider-Crank Mechanism, Coriolis
acceleration component, Crank and slotted lever Mechanism.
(10)
UNIT Ill
KINEMATIC SYNTHESIS: Stages of synthesis-Concepts of type, Number and dimensional
synthesis - Tasks of dimensional synthesis, Concepts of function generation, Rigid body
guidance and path generation, Freudenstein equation for function generation using three
precision points.
(7)
CAMS : Introduction, Types of cams, Types of Followers, Definitions, Graphical synthesis of
cam profile.(Knife Edge, Roller and Flat faced Followers).
(8)
UNIT IV
GEARS : Introduction, Classification gear terminology, Law of Gearing, Velocity of Sliding,
Forms of Teeth, Cycloidal Profile Teeth, Involute Profile Teeth, Path of contact, Arc of contact,
Number of pairs of Teeth in contact, Interference in Involute Gears, Minimum number of Teeth,
Interference between Rack and Pinion, Undercutting, Comparison of Cycloidal and Involute
tooth forms.
(8)
GEAR TRAINS: Introduction, simple Gear Train, Compound Gear Train, Reverted Gear train,
Planetary or Epicyclic Gear Train, Analysis of Epicyclic Gear Train, Torques in Epicyclic
Trains. Tabular and Algebraic Methods.
(7)
TEXT BOOKS:
1.Theory of Machines of by S.S.Rattan. TMH.
2.Theory of Mechanisms and Machines by C.S.Sharma, Kamlesh Purohit, PHI
REFERENCE BOOK:
1.Theory of Mechanisms and Machines by Ghosh and Mallik
2.Mechanism and Machine Theory by J.E. Shigley
MACHINE DRAWING
14ME306
Lectures
Final Exam
: 3 Periods/Week practical 1
: 3 hours
Final Exam Marks
: 40
: 60
1. Sectional views : Introduction, Full & half sectional views

(9)
2.Screwed fasteners : Screw thread nomenclature , types & classification of screw threads ,
Square & hexagonal headed bolted joints.
(9)
3. Keys, Cotters and Pin joints : Saddle & sunk keys, Cotter joint with sleeve , Knuckle joint
(9)
4.Shaft couplings : Universal coupling , Protected flange coupling
(6)
5.Assembly Drawings : Stuffing box , Screw jack , Eccentric, Pipe vice
(12)
Text book :
1. Machine Drawing by K.L.Narayana, P.Kannaiah & K.Venkata Reddy,
Reference book :
1. Machine Drawing by K.R.Gopala Krishnan
FUELS & OIL TESTING LAB

14MEL301
Practicals
Final Exam
: 3 Periods/Week
: 3 hours
Final Exam Marks
Any Ten Experiments out of the following are to be performed

1. Viscosity measurement using Redwood No.I viscometer.
2. Viscosity measurement using Redwood No.II viscometer.
3. Viscosity measurement using Saybolt viscometer.
4. Viscosity measurement using Englers viscometer.
5. Carbon residue test using Conradsons carbon residue apparatus
6. Calorific value of LPG using Junkers Gas Calorimeter
7. Calorific value of liquid fuel using Bomb Calorimeter
8. Calorific value of solid fuel using Bomb Calorimeter
9. Measurement of flash point using Abels apparatus
10. Measurement of flash point using Pensky-Martins apparatus
11. Measurement of flash and fire points using Clevelands open cup apparatus
12. Grease penetration test using Penetrometer apparatus
: 40
: 60
BASIC CAD LAB

14MEL302
II Year B.Tech (Mech.) Third Semester
Practicals
Final Exam
: 3 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
1. Introduction, Basic commands-drawing, modify, editing & dimensioning. Layers, AutoCAD

screen menus.
2. Sectional views of castings
3. Assembly drawings
a) Pipe vice b) Lathe tail stock c) Swivel bearing
Reference books:
1. AutoCAD 14 for Engineering drawing made easy by P.Nageswara Rao, TMH,
2. An Introduction to AutoCAD 2000 by A.Yarwood, Longman Publishers.
3. Machine Drawing by K.L.Narayana, P.Kannaiah, and K.Venkata Reddy, Wiley Eastern Limited,
New Age International.
STRENGTH OF MATERIALS LAB

14CEL303
II Year B.Tech (Mech.) Third Semester
Practicals
Final Exam
: 3 Periods/Week
: 3 hours
Final Exam Marks
List of Experiments:
1. Double Shear Test

2. Spring Test
3. Rockwell hardness test
4. Brinell Hardness Test
5. Youngs Modulus of given Specimen of cantilever beam
6. Youngs Modulus of given Specimen of simply supported beam
7. Torsion Test
8. Charpy Impact Test
9. Stress Strain Characteristics of steel bars using by UTM
: 40
: 60
MATHEMATICS-IV
14MA401
II Year B.Tech. (Mech) Fourth Semester
Lectures
Final Exam
: 4 Periods/Week Self study: 1

: 3 hours
Final Exam Marks
: 40
: 60
UNIT-I
Complex numbers and functions, conformal mapping:
Introduction to Complex Numbers, Derivative. Analytic Function, Cauchys- Riemann
equations. Laplace equation.
Geometry of analytic functions: conformal mapping, linear fractional transformations
UNIT-II
Complex Integration:
Line integral in the complex plane, Cauchys Integral Theorem, Cauchys Integral Formula,
Derivates of analytic functions.
UNIT-III
Taylor , Laurent series and Residue Integration
Taylor Series and Maclaurin series, Laurent Series, singularities and zeros. Infinity, Residue
integration method, evaluation of Real Integrals.
UNIT-IV
Special Functions
Power Series method, Legendres equation
gendres equation, Legendre Polynomials Pn(x), Bessels equation. Bessel functions
TEXT BOOK:
1. Advanced Engineering Mathematics, Erwin Kreyszig, 8th Edition, John Wiley,2000
REFERENCE BOOK:
1. Theory and Problems of Complex Variables, Murray R Spiegel, Schaums outline series
Prerequisites: Elementary calculus MA 02
Text Book:
1. Advanced Engineering Mathematics, Erwin Kreyszig, 8th edition, John Wiley & Sons, 2000.
Reference book:
2. Theory and Problems of Complex Variables, Murray R Spiegel, Schaums outline series.
MECHANICS OF MATERIALS- II
14ME402
III Year B.Tech. (Mech) Fourth Semester
Lectures
Final Exam
: 4 Periods/Week,Tutorial:1
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
DEFLECTIONS OF BEAMS : Introduction, Differential Equations of the Deflection Curve,
Deflections by Integration of the Bending Moment Equation. Moment Area Method, Macaulays
Method.
(9)
COLUMNS : Buckling and Stability, Columns with Pinned ends, Columns with other support
conditions, Limitations of Eulers Formula, Rankines Formula, Columns with eccentric Axial
Loads, Secant formula.
(6)
UNIT II
STATICALLY INDETERMINATE BEAMS: Statically indeterminate Beams, Analysis by
the differential equations of the Deflection curve, Moment Area Method.
(8)
CONTINUOUS BEAMS: Clapeyrons theorem of three moments, Beams with constant and
varying moments of inertia.
(7)
UNIT III
PRESSURE VESSELS: Thin Spherical and Cylindrical Pressure Vessels [Biaxial Stresses],
Thick Cylinders: Lames theory, Radial Deflection, Compound Cylinders.
(7)
CURVED BEAMS : Stresses in Beams of small and large initial curvature, The Winkler-Bach
theory, Stresses in Crane Hook and C-Clamp with Rectangular, Circular and Trapezoidal crosssections.
(8)
UNIT IV
SHEAR CENTRE : Bending Axis and Shear Centre, Position of Shear Centre, Shear flow,
Shear Centre of Channel section, Angle section, T- section and
I- section
(6)
CENTRIFUGAL STRESSES : Introduction, Rotating Ring, Rotating Disc, Rotating Disc of

uniform strength.
(9)
TEXT BOOK:
1. Mechanics of Materials by James M Gere.
2. Strength of materials by Sadhu Singh, Khanna Publishers
REFERANCBOOK:
1. Advanced Solid Mechanics by L.S. Srinath
2.Strength of materials by G.H. Ryder: MacMillan India Ltd. Publishers
APPLIED THERMODYNAMICS
14ME403
Lectures
Final Exam
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
VAPOR POWER CYCLES: Rankine cycle, Effect of pressure and temperature on the Rankine
cycle, reheat cycle, regenerative cycle.
(9)
STEAM BOILERS: Function, classification, working of Babcock and Wilcox boiler,
Mountings & Accessories.
(6)
UNIT II
STEAM NOZZLES: Types of nozzles, isentropic flow through nozzles, Effect of friction,
Nozzle efficiency, Critical pressure ratio and maximum discharge, calculation of throat and exit
areas using Mollier diagram.
(8)
STEAM CONDENSERS: Jet and Surface condensers, condenser vacuum and vacuum
efficiency, Condenser efficiency, Thermodynamic analysis, Air pumps, Capacity of air
extraction pump.
(7)
UNIT III
STEAM TURBINES: Types of steam turbines, Impulse turbines: pressure and velocity
compounding, velocity diagrams, work output, power, blade efficiency and stage efficiency.
Reaction turbines: velocity diagrams, degree of reaction, work output, power, blade efficiency
and stage efficiency. Governing of turbines, Overall efficiency and reheat factor.
(15)
UNIT IV
REFRIGERATION: Need for Refrigeration, Definitions, Methods of refrigeration, Working of
Refrigerator & Heat pump, Bell - Coleman cycle, Refrigerating effect, COP , vapor compression
refrigeration system, influence of various parameters on cycle performance, Vapor absorption
refrigeration cycle.
(8)
PSYCHROMETRY AND AIR CONDITIONING: -Introduction, Psychrometric properties,
Psychrometric chart, Psychrometric processes, Types of Air conditioning systems.
(7)
TEXTBOOKS:
1.Treatise on Heat Engineering-V.P.Vasandani and D.S.Kumar, Metropolitan Book co, New
Delhi.
2.Thermal Engineering ---Rajput, Laxmi Publ, New Delhi.
3.Thermal Science and Engineering- D.S.kumar, S.K.kataria Publ, New Delhi.
REFERENCE BOOKS:
1.Engineering Thermodynamics----Cengel and Boles, TMH.
2.Refrigeration and Air Conditioning -- C.P. Arora, TMH.
3.Engineering ThermodynamicsAchuthan, PHI, New Delhi
HYDRAULIC MACHINES
14ME404
Lectures
: 4 Periods/Week
: 40
Final Exam
: 3 hours
Final Exam Marks
: 60
UNIT I
INTRODUCTION: Classification of fluid machines, linear impulse momentum and angular
momentum principles.
(5)
IMPACT OF JETS: Introduction, Force exerted by a fluid jet on stationary and moving flat
plate and curved vanes, flow over radial curved vanes, sprinklers.
(10)
UNIT II
HYDRAULIC TURBINES: Elements of hydroelectric power plants, Heads and efficiencies of
a turbine, Classification of turbines, Pelton, Francis and Kaplan turbines- Working, proportions
of turbines, Numerical problems. Draft tube theory, Oil pressure Governing.
(8)
PERFORMANCE OF TURBINES: Performance under unit quantities, Performance under
specific conditions - Specific speed . Selection of turbines. Performance characteristics curves,
Water hammer, Cavitation in turbines- Thomas cavitation factor
(7)
UNIT Ill
RECIPROCATING PUMPS: Types, Working principle, Power required by a Reciprocating
pump, Coefficient of discharge, Slip and negative slip, Effect of Acceleration of piston on
velocity and pressure in suction and delivery pipes, Indicator diagram, Maximum speed of a
reciprocating pump. Air vessels. Work saved against friction by fitting air vessel.
(8)
CENTRIFUGAL PUMPS: Types, Working, Reciprocating vs. Centrifugal pump, Work done
by impeller, Head of a pump, losses and efficiencies, Minimum starting speed, Specific speed,
Multistage pumps, Pumps in parallel, Performance characteristic curves, limitation of suction
lift, NPSH, Cavitations.
(7)
UNIT IV
DIMENSIONAL ANALYSIS & MODEL SIMILITUDE: Introduction, Buckinghams PI
theorem, Types of similarities, Force ratios, Dimensionless numbers, Model Laws-Reynolds and
Froude law, Types of models, Scale effect.(Qualitative treatment only)
(10)
MISCELLANEOUS HYDRAULIC EQUIPMENT: Hydraulic accumulator (simple and
differential type), Hydraulic intensifier, Hydraulic press, Hydraulic crane Hydraulic lift,
Hydraulic ram.
(5)
TEXT BOOK:
1. Hydraulics and Fluid Mechanics --P.N.Modi & S.M. Seth, Standard Book House, New Delhi.
2. Hydraulic Machines - Jagadish Lal
REFERENCE BOOKS:
1. Fluid Mechanics & Fluid Power Engineering - D.S.Kumar, SK Kataria &sons, New Delhi.
2. Fluid Mechanics & Hydraulic Machines - R.K.Bansal
CASTING, FORMING AND WELDING TECHNOLOGY

14ME405
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
METAL CASTING: Introduction, advantages of Casting method, pattern types, materials and
allowances. Sand moulding procedure, Moulding materials and equipment. Preparation, control
and testing of moulding sands, Cores, Cupola: Description, operation and zones.
(15)
UNIT II
GATING DESIGN: Design Considerations
SPECIAL CASTING METHODS: Permanent Mould Casting, Die Casting, Centrifugal
casting, Investment casting, shell moulding, CO2 process and continuous casting. Fettling of
castings, casting defects: causes, remedies and testing.
UNIT
(15)
III
WELDING: Gas and arc welding - Principles of oxy-acetylene welding, oxyacetylene flame
cutting, MMAW (Manual metal arc welding), TIG, MIG, submerged arc welding. Resistance
welding principles - Butt welding, Spot welding, Seam welding. Thermit Welding, Electro slag
welding. Laser beam welding. Brazing & Soldering, welding defects - causes and remedies.
(15)
UNIT IV
METAL WORKING PROCESSES: Introduction, Hot and Cold working of metals. Rolling,
Forging, Extrusion, Tube making, Swaging, Spinning, Coining, Embossing and Wire drawing.
(6)
SHEET METAL WORKING OPERATIONS: Introduction, Types of Sheet metal working
operations, Blanking and Punching operations, Clearance and shear as applied to
Punching/Blanking operations, Simple related problems, High energy rate forming of metals,
Bending, deep drawing,
(9)
load estimation using homogeneous deformation methods.
TEXT BOOKS:
1. Manufacturing Technology-Vol- I by PN Rao, TMH
2. Workshop Technology Vol.1 by S.K.Hazra Chowdary. Khanna Publishers
3. A course in Work shop technology, Vol-I by B.S.Raghuvanshi, Dhanpatrai & sons.
REFERENCE BOOKS:
1. Welding Technology by Little, TMH
2. Principles of Metal Casting by Heine, Loper, Rosenthal, TMH.
3. Manufacturing Engineering & Technology, Kalpakjian, Pearson Education / PHI
MATERIAL SCIENCE & METALLURGY

14ME406
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
CRYSTALLOGRAPHY: Classification of crystals Bravis lattices Miller Indices Packing
factor in cubic systems coordination number crystal imperfections crystal deformation
Slip and Twinning.
(8)
PHASE DIAGRAMS: Binary phase diagrams Phase rule one component system, two
component system, isomorphous, eutectic, eutectoid, peritectic and peritectoid systems. (8)
UNIT II
HEAT TREATMENT OF STEELS: IronIron carbide equilibrium diagram, TTT diagrams
for eutectoid, hypo and hyper eutectoid steels, martensite and bainitic transformation.(8)
HEAT TREATMENT: Annealing, normalizing, hardening, tempering, surface hardening, age
hardening, austempering, martempering and hardenability concept and experimental
determination.
(8)
UNIT III
STRENGTHENING MECHANISMS: Strain hardening, solid solution strengthening, grain
refinement, dispersion strengthening.
(6)
COMPOSITE MATERIALS:
Properties and applications of Particulate-reinforced composites, fibre reinforced composites,
Laminar composites and metal matrix composites.
(7)
UNIT IV
POWDER METALLURGY:
Powder metallurgy process, preparation of powders,
characteristics of metal powders, mixing, compacting, sintering, Applications of Powder
Metallurgy.
(8)
FERROUS AND NON FERROUS MATERIALS:
Composition,
properties
and
application of ferrous and non ferrous metals and their alloys. Brief study of cast iron, steels,
copper, aluminum,
Nano materials Introduction and Applications
(7)
TEXT BOOKS:
1.Introduction to Physical Metallurgy - Avner, McGrawHill
2.Material Science and Metallurgy - V. Raghavan, Pearson Education / PHI.
3.Material Science and Metallurgy - R.B.Choudary - Khanna Pub.
REFERENCE BOOK:
1.Material Science and Metallurgy - Dr.V.D.Kodgire, Everest Publishers
2.Nano materials J.Dutta & H.Hofman
3.Manufacturing Engineering & Technology Kalpak Jain & Schmid, Pearson / PHI
FLUID MECHANICS AND HYDRAULIC MACHINES LAB

14CEL401
II Year B.Tech (Mech.) fourth Semester
Practicals
Final Exam
: 3 Periods/Week
: 3 hours
Final Exam Marks
List of Experiments:
1. Mouth pieces: determination of coefficient of discharge
2. Determination of friction factor for pipes of different materials
3. Verification of Bernoullis theorem
4. Reynolds experiment
5. Venturimeter: Determination of coefficient of discharge
6. Orifice: Determination of coefficient of discharge
7. Impact of jets
8. Performance studies on single acting reciprocating pump
9. Performance studies on single stage centrifugal pump
10. Performance study on Pelton turbine
: 40
: 60
COMPUTER APPLICATIONS IN MECHANICAL ENGINEERING LAB

14MEL402
II Year B.Tech. (Mech) Second Semester
Practicals
Final Exam
: 3 Periods/Week
: 3 hours
Final Exam Marks
Note : Develop programs for the following problems using C- language

I .SIMULATION EXERCISE: [ Any TWO ]
1.Hart Mechanism
2.Paucellier Mechanism
3.Robert Mechanism
4.Scott Russel Mechanism
5.Watt Mechanism
6.Pantograph Mechanism
7.Four Bar Mechanism
8.Slider Crank Mechanism
9.Tchibicheff Mechanism
II.COMPUTER APPLICATIONS: [ANY FOUR]

1.Numerical Methods
2.Differential Equation solution
3.Gauss elimination: General Matrix and skyline.
4.Two dimensional stress analysis
5.Cylinder subjected to internal pressure.
6.1D Heat Transfer (conduction)
7. Analysis of beams
8.O.R. applications like L.P., Queing Theory, CPM, PERT etc..
III. APPLICATIONS PACKAGES: [ANY ONE]

1. Simple packages for Fluid flow like fluent, Star CD etc.,
2.O.R. Packages like TORA, LINDO, PRIMAERA ,Etc.,
3.MAT Lab.
4.Any application package in Mechanical Engineering.
: 40
: 60
BASIC MANUFACTURING PROCESSES LAB

14MEL403
Practicals
Final Exam
: 3 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
PATTERN MAKING: Solid pattern, Split pattern.
MOULDING: Stepped cone pulley, Hand wheel, Bush.
FITTING: Four Standard Exercises
TURNING: Plain, Step and Taper turning, Right-hand and Left-hand threads, Eccentric turning,
Knurling and contour turning.
PROFESSIONAL ETHICS AND HUMAN VALUES

14ME501
III Year B.Tech. (Mech) Fifth Semester
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Human Values: Morals, Values and Ethics, Integrity, Work Ethic, Service Learning, Civic
Virtue, Respect for others, Living peacefully, Caring, Sharing, Honesty, Courage, Valuing time
Co-Operation, Commitment, Empathy, Self Confidence, Character, Spirituality
(14)
UNIT -II
Engineering Ethics: Senses Of Engineering Ethics, Variety of Moral Issues, Types of Inquiry,
Moral Dilemmas, Moral Autonomy, Kohlbergs Theory,
Gilligans Theory, Consensus and controversy, Professions and Professionalism, Professional
Ideals and Virtues, Theories about Right Action, Self interest, Customs and religion, Uses of
EthicalTheories.
(14)
UNIT III
Engineering as Social Experimentation: Engineering as Experimentation, Engineers as
Responsible
Experimenters,
Codes
of
Ethics,
Balanced
Outlook
on
law
(20)
Safety, Responsibility and Rights: Safety and Risk Assessment of Safety and Risk, Risk
Benefit Analysis and Reducing Risk.
Collegiality and Loyalty, Respect For Authority, Collective Bargaining, Confidentiality,
Conflicts Of Interest, Occupational Crime, Professional Rights, Employee Rights, Intellectual
property rights (IPR), Discrimination.
UNIT IV
Global Issues:
Multinational Corporations, Environmental Ethics, Computer Ethics, Weapon Development,
Engineers as Managers, Consulting Engineering,Engineering as Expert Witnesses and Advisors,
Moral leadership, Sample codes of Ethics like ASME, ASCE, IEEE, Institution of Engineers
(India), Indian institute of material management, Institution of Electronics and
Telecommunication Engineers (IETE),India etc.,
(12)
Text Books:
1. Govindarajan. M, Natarajan. S, Senthilkimar.V.S, Engineering Ethics, Phi, 2004.
2. Mike Martin and Roland Schinzinger, Ethics In Engineering, Mc Graw Hill, New York 1996.
3. M.P.Raghavan, Professiional Ehics and Human Values, Scitech Publications(India)
Pvt.ltd.,2009.
Reference Books:
1.Charles D Fleddermann, Engineering Ethics, Prentice Hall, New Jersey, 2004.
2.Charles E Harris, Michael S Pritchard and Michael J Robins, Engineering Ethics Concepts and
Cases, Thomson Learning, United States, 2000.
3.John R Boatright, Ethics and The Conduct Of Business, Phi, New Delhi, 2003.
4.Edmund G Seebauer And Robert L Barry, Fundamentals Of Ethics For ScientistsAnd
Engineering, Oxford University Press, 2001.
DESIGN OF MACHINE ELEMENTS-I

14ME502
Lectures
Final Exam
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
BASICS: Basic procedure of machine design, requirements and design of machine elements,
traditional design methods. Design synthesis, use of standards in design, manufacturing
considerations in machine design, preferred numbers and significance.
(5)
MATERIALS & THEIR PROPERTIES : Mechanical properties of materials, Common
engineering materials and their properties.
(4)
DESIGN FOR STATIC STRENGTH : Simple Stresses , Combined stresses , Torsional and
Bending stresses, stress strain relation, various theories of failure , Factor of safety and its
importance in design.
(6)
UNIT II
DESIGN FOR FATIGUE STRENGTH : Stress concentration, stress concentration factors,
reduction of stress concentration, fluctuating stresses, fatigue failure, endurance limit, low cycle
and high cycle fatigue, notch sensitivity, endurance limit approximate estimation method,
reversed stresses ,design for finite and infinite life, cumulative damage in fatigue, Soderberg and
Goodman
lines,
modified
Goodman
diagrams,
Gerber
equation.
(13)
COTTER JOINTS: Socket & Spigot cotter joints.
(2)
UNIT Ill
RIVETED JOINTS: Types of riveted joints, Failures of riveted joints, Design of Boiler Joints
& Lozenge Joint, Design of joints under eccentric loading.
(8)
WELDED JOINTS: Types of welded joints, Design of butt and fillet welded joints,
eccentrically loaded welded joints. Welded joints subjected to fluctuating loads.
(7)
UNIT IV
THREADED JOINTS basic types, bolt of uniform strength, materials and manufacture,
eccentrically loaded bolted joints in shear, eccentric load perpendicular to axis of bolt, eccentric
load on circular base.
(7)
POWER SCREWS: Types - Mechanics of power screws, efficiency, Design of Screw Jack. (8)
TEXT BOOKS:
1.Design of machine elements by Bhandari, Tata McGraw Hill book Co.
2.Machine Design by P.C. Sharma & D.K. Agarwal.
HAND BOOKS TO BE ALLOWED IN UNIVERSITY EXAMINATION:
1.Design data book, P.S.G. College of Technology, Coimbatore
2.Design data book, Mahadevan & Balaveera Reddy - CBS Pub
Lectures
Final Exam
I.C. ENGINES & GAS TURBINES

14ME503
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
I.C.ENGINES: Introduction, Basic engine nomenclature, Review and classification of I.C.
Engines, working principles of S.I. and C.I. Engines (both 4 stroke and 2-stroke) - valve timing
and Port Timing diagrams - Differences between S.I. & C. I. and 2 stroke & 4 stroke engines
(7)
FUEL SUPPLY SYSTEMS: S.I. Engines- Chemically correct air-fuel ratio, Air-fuel mixture
requirements, Carburetion, Simple float type carburetor, injection system, types, electronic fuel
injection system, MPFI.
(4)
C. I. Engines- Air- fuel requirements, fuel supply and injection systems, Bosch fuel pump,
electronic injection system, CRDI.
(4)
UNIT II
COMBUSTION PROCESSES: S.I.Engines- Normal combustion, abnormal combustion,
Knock rating and Octane number.
(3)
C.I.Engines- Ignition delay, combustion knock in C.I. engines, Knock rating and Cetane
number.
(4)
TESTING OF I.C.ENGINES: Indicator diagram, evaluation of Indicated Power, Brake power,
Fuel consumption, SFC, Mechanical & thermal efficiencies, mean effective pressure, air-fuel
ratio, Heat balance, Engine performance curves, Variables affecting engine performance for
both S.I. & C.I. Engines.
(8)
UNIT III
RECIPROCATING AIR COMPRESSORS: Classification, Operation, Effect of clearance
volume, compression ratio, volumetric efficiency, power input, Single-stage and Multi-stage
compressors, Effect of intercooling, optimum intermediate pressure in a two-stage compressor.
(7)
ROTARY COMPRESSORS: Introduction, Types and their applications, principles of working,
static and total head values, Centrifugal compressor- velocity vector diagrams, pressure
coefficient, pre whirl, Axial flow compressor - polytropic efficiency, Surging, Choking and
Stalling, Centrifugal compressor versus axial flow compressor.
0(8)
UNIT IV
GAS TURBINES: Closed and Open cycle gas turbines, analysis of closed cycle gas turbine,
efficiencies of Compressor and turbine, cycles with intercooling, reheat and regeneration.
(8)
JET & ROCKET PROPULSION: Basic principles of Jet propulsion - specific thrust,
propulsive efficiency and overall thermal efficiency of a jet engine, Principles of Rocket
propulsion, Types of rocket propulsion.
(7)
TEXT BOOKS:
1.Treatise on heat Engineering - Vasandani & Kumar-Metropolitan Book Company, New Delhi
2.Thermal Engineering- Rajput-Laxmi Pub, New Delhi
3. Internal Combustion Engines - V.Ganeshan , Tata McGraw Hill Publishing Company Ltd..
REFERENCE BOOKS:
1.Fundamentals of I.C. Engines - P.W. Gill, J.H. Smith & Ziurys- IBH & Oxford publ, Mumbai.
2. A Course in I.C. Engines - M.L. Mathur & R.P. Sharma - Dhanpat Rai & Sons- New Delhi.
3.Gas Turbine Theory - Cohen, Rogers and Sarvanamuttu.
METAL CUTTING AND MACHINE TOOLS

14ME504
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
MACHINING PROCESSES AND MACHINE TOOLS:
Introduction, Primary and Auxiliary Motions in Machine Tools, Parameters defining working
motions of a Machine Tool.
(3)
LATHE :
Constructional details, specifications, classification of lathes.
Lathe Mechanisms: Spindle speed Mechanisms in Belt driven and All Geared Head stock, Apron
and Half-nut mechanisms. Lathe accessories various work holding devices. Lathe operations
including taper turning and thread cutting and related problems.
(12)
UNIT II
DRILLING MACHINES:
Types and specifications, spindle feed mechanism, drilling operations, drilling time.
(4)
SHAPING AND PLANING:

Constructional details, types of shapers and planers, specifications, Quick Return Mechanism
and automatic feed mechanisms.
(4)
GRINDING MACHINES:
General Principles, Wheel materials, Selection and specification of grinding wheels, Truing and
Dressing of grinding wheels, types of grinding machines.
(7)
UNIT III
SURFACEFINISHING OPERATIONS: Honing and Lapping operations
(3)
MILLING MACHINES:
Working Principle, Size and Specification, Up and Down Milling, Types of milling machines,
Description and working of Universal Milling machine, Milling operations, Milling cutters,
Indexing methods and Indexing Head, related problems.
(12)
UNIT IV
THEORY OF METAL CUTTING:
Introduction, Basic elements of machining, Nomenclature of single point cutting tool, Tool
Geometry, Mechanics of chip formation, Types of chips. Determination of shear angle and chip
thickness ratio, stress and strain in the chip, velocity relations, Merchants theory of orthogonal
cutting forces, related simple problems.
(6)
Tool wear, Tool life and Tool life criteria

(3)
Heat Generation and temperature distribution in metal cutting , cutting fluids- types and required
characteristics.
(3)
CUTTING TOOL MATERIALS: Requirements of Tool materials and types, economics of
machining.
(3)
TEXT BOOKS:
1.Workshop Technology Vol. II by Hazra Chowdary
2.Production Engineering by P.C. Sharma, S.Chand & Co.
REFERENCE BOOKS:
1.Materials and Processes in Manufacturing by E.Paul De Garmo, J.T.Black and Ronald
A.Kohser.
2.Machining and machining process by PN.Rao, TMH.
3.Manufacturing Science by Ghosh & Mallick
OPERATIONS REASERCH
14ME505
Lectures
Final Exam
: 3 hours
Final Exam Marks
: 40
: 60
UNIT-I
LINEAR PROGRAMMING: Definition, Characteristics and Phases and Scope of Operations
Research, Mathematical formulation of the problem, Graphical method, Simplex method,
Artificial variables techniques: Twophase method, Big-M method, Variants of Simplex method,
Duality Principle, Dual Simplex method.
(15)
UNIT-II
TRANSPORTATION PROBLEM: Introduction, Formulation, Optimal solution,
Unbalanced transportation problem, Degeneracy.
(8)
ASSIGNMENT PROBLEM: Formulation, Optimal solution, Variants of Assignment Problem,
Traveling Salesman problem.
(7)
UNIT-III
QUEUING THEORY: Introduction, Characteristics of Queuing models, Single Channel
Queuing Theory models with Poisson arrivals and exponential service times with infinite
population. Analysis of markovian chains, Transition diagrams.
(9)
SIMULATION: Introduction, Advantages, Limitations. Monte carlo simulation. Generation of
Random Numbers: Mixed congruential method, Additive congruential method and multiplicative
congruential method. Application problems in queuing and inventory.
(6)
UNIT-IV
PERT AND CPM: Project management, network modeling-probabilistic model, various types
of activity times estimation-Programme Evaluation Review Techniques- Critical Path-probability
of completing the project, Critical Path Method (CPM)-critical path calculation.
(9)
DYNAMIC PROGRAMMING: Introduction, Bellmans Principle of optimality, Applications
of dynamic programming: optimal subdivision problem, Linear programming problem. (6)
TEXT BOOKS:
1. Operations Research / H.A. Taha
2. Operations Research / S.D.Sharma-Kedarnath Ramnath
1.
2.
3.
4.
5.
6.
REFERENCES :
O.R /A.M.Natarajan, P.Balasubramani, A.Tamilarasi/Pearson Education.
O.R / Premkumar Gupta & D.S.Hira / S.Chand & Company Ltd.
Operations Research / Wagner/ PHI Publications.
Operation Research /J.K.Sharma/MacMilan.
Introduction to O.R / Hiller & Libermann (TMH).
Operations Research, P Shankara Iyer
ENGINEERING ECONOMICS AND ACCOUNTANCY

14ME506/A
Lectures
Final Exam
: 3 hours
Final Exam Marks
: 40
: 60
UNIT-I
Economics: Utility, Value, Wealth, Consumption, Wants Necessaries, Comforts and Luxuries.
(7)
Demand: Laws of Demand, Elasticity of Demand Price Elasticity of Demand, Factors
affecting Elasticity of Demand.
(8)
UNIT-II
Forms of Business organization: Single Trader, Partnership and Public Limited Company.
(5)
Costing: Cost Concepts, Elements of Cost, Methods of Distribution of Overhead Costs. Unit
Costing, Job Costing and Process Costing.
(10)
UNIT-III
Break-Even Analysis: Assumptions, Break Even Charts, Simple problems. (7)
Depreciation: Definition, causes of depreciation, Methods of Depreciation. (8)
UNIT-IV
Accountancy: Double-Entry Book Keeping, Journal, Ledger, Final Accounts: Preparation of
Trading Account, Profit &Loss account and Balance sheet. (15)
Text Books:
1. Aryasri: Managerial Economics and Financial Analysis, TMH.
2. S. A. Siddiqui & A. S. Siddiqui, Managerial Economics & Financial Analysis, New age
International Space Publications.
Reference Books:
1. Narayanaswamy: Financial AccountingA Managerial Perspective, PHI.
2. M.Mahajan- Industrial Engineering and Production Management, Dhanpatrai & Sons.
COMPUTER GRAPHICS
14ME506/B
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
GEOMETRY AND LINE GENERATION: Introduction, Lines, Line segments, Perpendicular
Lines, Distance between a point and a Line, Vectors, Pixels and Frame Buffers.
GRAPHIC PRIMITIVES: Introduction, Display devices, Primitive operations, The DisplayFile Interpreter, Normalized Device Coordinates, Display-File structures.
(15)
UNIT II
POINT PLOTTING TECHNIQUES: Coordinate system, Incremental methods, Line Drawing
Algorithms, Circle generators.
LINE DRAWING DISPLAYS: The CRT, Inherent-Memory devices, The storage-Tube
display, The Refresh Line-Drawing Display.
(15)
UNIT III
POLYGONS: Introduction to Polygons, Polygon representation, Polygon Interfacing
Algorithms, Filling Polygons, Filling with a pattern, Initializing, Antialiasing
TRANSFORMATIONS: Introduction, Scaling Transformations, Rotation, Homogeneous
Coordinates and Translations, Coordinate Transformations, Rotation about an Arbitrary point,
Inverse Transformations.
(15)
UNIT IV
SEGMENTS (Algorithmic Approach only) : Introduction, The Segment table, Segment
creation, Closing a Segment, Deleting a Segment, Renaming a Segment.
WINDOWING AND CLIPPING: Introduction, The Viewing Transformation, Viewing
transformation implementation, Clipping, The Cohen-Sutherland Algorithm, Clipping of
Polygons.
(15)
TEXT BOOK:
Computer Graphics by Steven Harrington.
REFERENCE BOOKS:
1. Procedural elements for Computer Graphics by Rogers.
2. Principles of Interactive Graphics by Newman and Sproull.
MECHANICS OF COMPOSITE MATERIALS

14ME506/C
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
INTRODUCTION: Classification and characteristics of composite materials - mechanical
behavior of isotropic and orthotropic materials - terminology of laminated fibre reinforced
composite materials current and potential usage of composites.
(5)
MECHANICAL BEHAVIOUR OF A LAMINA: Engineering constants for orthotropic
materials stress, strains, relation for plane stress in an orthotropic material and in a lamina of
arbitrary orientation strength of an orthotropic laminates Basic strength theories
Determination of engineering constants mechanics of materials approach.
(10)
UNIT II
MACHANICAL BEHAVIOUR OF A LAMINATE:
Classical lamination theory lamina
stress - strain behavior Resultant forces and moment in a laminate Types of laminates
Strength and Stiffness of laminates - Interlaminar stress in laminates.
(15)
UNIT III
LAMINATED PLATES AND BEAMS: Types of laminated plates and beams elementary
mechanical behavior - Bending and buckling of laminated plates forces and moments Stress
and Deflection under different boundary conditions.
(15)
UNIT IV
PRODUCTION OF COMPOSITE MATERIALS & PRODUCTS: Matrix and their role
Principal types of fibre and matrix materials - Basic principle of production of composite
materials & products
- Advantages and Limitations of different processes.
(6)
MOULDING AND FORMING OF COMPOSITES: Layup and curing open and closed
mould process hand layup techniques filament winding Pultrusion Pulforming
Thermoforming Injection moulding - blow moulding.
(6)
APPLICATION OF COMPOSITES: AIR CRAFT: Missiles- automobile - electrical and
electronics recreational and sports equipment - future potential of composites.
(3)
TEXT BOOKS:
1. Robert M.Jones.Mechanics of compsite Materials Mc Graw Hillbook co.1970.
2..Meier schwartyx Composites meterials Hand book.Mc Graw Graw Hill Book co.1984.
REFERENCE BOOKS:
1. Agarwal B.D. &Brout man LJ.Analysists and performance of Fibre composites,Johnwileay &
sons.
2. Tery Richardson, Composite Adesign guide Industrial press inc, NY,1987.
I.C ENGINES LAB

14MEL501
Practicals
Final Exam
: 3 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
Any Ten Experiments out of the following are to be performed

1. Valve timing diagrams on 4-stroke single cylinder petrol and diesel engine models.
2. Port Timing diagram on 2 stroke single cylinder petrol engine model.
3. Air compressor- to determine volumetric and isothermal efficiencies
4. Blower test rig- to determine overall efficiency
5. Two stroke single cylinder petrol engine load test
6. Four stroke single cylinder petrol engine - load test & motoring test
7. Four stroke four cylinder petrol engine load test
8. Four stroke four cylinder petrol engine heat balance test
9. Four stroke four cylinder petrol engine Morse test
10. Four stroke four cylinder diesel engine load test
11. Four stroke four cylinder diesel engine heat balance test
12. Four stroke single cylinder petrol engine variable compression ratio test
13. Computer interfaced single cylinder Four stroke petrol engine load test
14. Computer interfaced single cylinder Four stroke diesel engine load test
MACHINE SHOP PRACTICE

14MEL502
Practicals
Final Exam
: 3 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
TURNING :
L.H & R.H Threading, Multi-start threading, Drilling, Boring and Internal threading
DRILLING & TAPPING :
Drilling and Tapping of Different threads
MILLING :
Key-way, Spur and Helical Gear Milling, Gear Hobbing.
SHAPING :
At least three models involving production of flat surface, Stepped surface, Cutting dovetail and
rectangular grooves.
PLANING AND SLOTTING :
Working on Planing and Slotting Machines
GRINDING :
At least one model on surface grinder, cylindrical grinder or tool and cutter grinder.
SOFT SKILLS LAB

14ELL503
Practicals
Final Exam
1.
2.
3.
4.
5.
6.
: 3 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
NON-VERBAL COMMUNICATION
a. Voluntary & Involuntary Body Language.
b. Facial Expressions.
c. Kinesics.
d. Oculesics.
e. Haptics.
f. Proxemics.
g. Chronemics.
h. Para Linguistics.
LIFE SKILLS
a. Good Attitude & Self Motivation.
b.Social Behaviour &Social Norms.
c. Ethics, Values and Positive Work Ethics.
d.Desire to Learn and Responsibility.
EMOTIONAL INTELLIGENCE
a. Self Awareness.
b. Self Control.
c. Self Motivation.
d. Empathy.
e. Relationship Skills.
f. Self Esteem.
PEOPLE SKILLS
a. Effective Listening.
b. Managing Stress.
c. Persuading Techniques.
d. Questioning Techniques Close End, Open End Questions and Answers.
e. Role Perception.
COGNITIVE SKILLS
a. Situational Analysis.
b. Critical Thinking.
c. Lateral Thinking.
d. Creative Thinking.
EMPLOYABILITY
a. Corporate Information.
b. Group Discussion.
c. Team Building.
d. Conflict Management.
e. Negotiating Skills.
f. Interview Techniques.
RFFERENCE BOOKS:
1. The Definitive Book Of Body Language, Allan & Barbara Pease
2. You Can Win, Shiv Khera.
3. Lateral Thinking, Edward De Bono.
4. How To Prepare For Group Discussions And Interview, Hari Mohan Prasad, Rajnish
Mohan, 2nd Edition, TMH.
5. Emotional Intelligence, Daniel Goleman.
6. The 7 Habits Of Highly Effective People, Stephen R. Covey
7. Working in Teams, Sandy Pokras.
MACHINE DYNAMICS
14ME601
III Year B.Tech. (Mech) Sixth Semester
Lectures
Final Exam
: 4 Periods/Week,Tutorials:1
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
DYNAMIC FORCE ANALYSIS : Introduction, D'Alembert's Principle, Equivalent Offset
Inertia Force, Dynamic Analysis of Slider - Crank mechanism (Using Analytical method)
Velocity and Acceleration of piston, Angular velocity and Angular Acceleration of Connecting
Rod, Piston Effort (Effective Driving Force), Crank Effort. Turning Moment on Crankshaft,
Inertia of connecting Rod.
(8)
GOVERNORS: Introduction, Types of Governors, Watt Governor, Porter Governor, Hartnell
Governor, Sensitiveness of a Governor, Hunting, Isochronism, Stability,Controlling force.
(7)
UNIT II
BALANCING : Introduction, Static balancing, Dynamic balancing, Transferring of a Force

from one plane to another, Balancing of Several Masses in Different planes, Primary &
Secondary Balancing of Reciprocating Mass , Balancing of In line Engines, Balancing of V
Engines.
(10)
GYROSCOPES : Angular Velocity, Angular Acceleration, Gyroscopic Torque, Gyroscopic
Effect on Naval Ships, Stability of a two wheel vehicle.
(5)
UNIT III
FUNDAMENTALS OF VIBRATION:- Introduction, Definitions,Vector method of
representing Harmonic Motions, Addition of two simple Harmonic motion of the same
frequency.
(2)
UNDAMPED FREE VIBRATIONS OF SINGLE DEGREE OF FREEDOM SYSTEMS:Introduction, Derivations of differential equations, solution of differential equation, Torsional
vibrations, Equivalent stiffness of spring combinations, Energy method.
(6)
DAMPED FREE VIBRATIONS OF SINGLE DEGREE OF FREEDOM SYSTEMS:Introduction, Different types of damping, Free vibrations with viscous damping, Logarithmic
Decrement, Viscous dampers, Coulomb damping.
(7)
UNIT IV
FORCED VIBRATIONS OF SINGLE DEGREE OF FREEDOM SYSTEMS:- Introduction,
Forced vibrations with constant Harmonic excitation, Forced vibration with rotating and
reciprocating unbalance, forced vibrations due to excitation of the support, Critical speed of a
light shaft having a single disc without damping, critical speed of a light shaft having a single
disc with damping, Vibration, isolation and transmissibility, vibration measuring instruments.
(15)
TEXT BOOKS:
1.Theory of Machines by S.S. Rattan
2.Theory of Mechanisms and Machines by C.S.Sharma, Kamlesh Purohit, PHI
3.Mechanical Vibrations G.K.Groover
4.Mechanical Vibrations Rao V.Dukkipati, J.Srinivas, PHI
REFERENCE BOOKS:
1.Theory of Machines by T. Bevan
2.Theory of Mechanisms and Machines by A. Ghosh and A.K. Mallik.
3.Theory of Machines and Mechanisms by Jagadish Lal

4.Mechanical Vibrations W.T.Thomson
5.Mechanical Vibration S.S.Rao
Lectures
Final Exam
DESIGN OF MACHINE ELEMENTS-II

14ME602
: 4 Periods/Week, Self study:1
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
SHAFTS: Design of solid and hollow shafts for strength For Bending, Torsion, Combined
bending and torsion and combined bending, torsion and axial loads
KEYS: Introduction, Design of square and flat keys
SHAFT COUPLINGS: Rigid couplings: Muff Coupling, Clamp or compression coupling
,Flange coupling, Bushed pin flexible coupling. Oldham coupling ,
universal
coupling
(15)
UNIT II
BEARINGS AND LUBRICATION: Lubrication, Types of lubrications, types of lubricants,
properties of lubricants, types of Bearings, Bearing materials, Journal bearing design (using
Mckees equation and Raymond and Boyd charts & tables)
BALL AND ROLLER BEARINGS: Static load, Dynamic load, Equivalent radial load,
selection of ball and roller bearings
(15)
UNIT III
BELT DRIVES: Flat and V-belts, Belt constructions, Geometrical relationships, Analysis of
belt tensions, condition for maximum power, Selection of Flat-belts, Selection of V-belts,
Selection of Pulleys.
CHAIN DRIVES: Introduction, Chain drives, Advantages of chain drives over belt drives,
Polygonal effect, Selection of roller chains.
(15)
UNIT IV
SPUR GEARS : Classification of gears, Terminology of spur gear, standard systems of Gear
Tooth, Force analysis, Gear tooth failures, Selection of material, Beam Strength of gear teeth,
lubrication, Lewis Equation.
HELICAL GEARS: Terminology of helical gears, virtual number of teeth, Tooth proportions,
force analysis, Beam Strength of helical gears, effective load on gear tooth, wear strength of
helical gears. Lewis Equation.
BEVEL GEARS: Terminology, force analysis, Beam Strength of bevel gears, wear strength.
Lewis Equation.
WORM GEARS: Terminology, Force analysis, Strength rating of worm gears, Wear rating of
worm gears.
(15)
TEXT BOOKS:
2.Machine Design by P.C. Sharma & D.K. Agarwal.
1.Design data book, P.S.G. College of Tech, Coimbatore
2.Design data book, Mahadevan & Balaveera Reddy - CBS Pub.
HEAT TRANSFER
14ME603
Lectures
Final Exam
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
INTRODUCTION: Basic Modes and Laws of Heat transfer, thermal conductivity, Steady state
Heat Conduction, General conduction equation in Cartesian and Cylindrical coordinates, initial
and boundary conditions.
(4)
ONE- DIMENSIONAL STEADY STATE HEAT CONDUCTION: Heat flow through plane
wall and cylinder with constant thermal conductivity , Heat flow through composite slab and
Cylinders, Thermal resistance, Electrical analogy, Thermal contact resistance, problems on
variable thermal conductivity, critical insulation thickness, uniform heat generation in slabs.
(7)
EXTENDED SURFACES: Types, Applications, Fin materials, Heat transfer from fins with
uniform cross section, Fin efficiency and Effectiveness.
(4)
UNIT II
TRANSIENT HEAT CONDUCTION (One dimensional only) - Lumped heat capacity
systems.
(3)
FORCED CONVECTION: Introduction, Principles of convection, Mass, Momentum and
Energy equations for boundary layer, Hydrodynamic and thermal boundary layers and their
thicknesses, Correlations for heat transfer in Laminar and Turbulent flows over a flat plate, and
in pipes, relation between fluid friction and heat transfer in laminar & turbulent flows
Reynolds-Colburn Analogy.
(12)
UNIT III
NATURAL CONVECTION: Approximate analysis for laminar film on a vertical plate,
Correlations for vertical plates, horizontal plates, vertical and horizontal cylinders, inclined
surfaces.
(7)
HEAT EXCHANGERS: Classification, types of heat exchangers, Flow arrangement,
Temperature distribution , Overall heat transfer coefficient, Fouling factor, LMTD and NTU
methods of Heat exchanger analysis, correction for LMTD for use with multi pass and cross flow
Heat Exchangers, Effectiveness.
(8)
UNIT IV
RADIATION: Fundamentals of Radiation: Basic Concepts and definitions, Absorptivity,
Reflectivity, Transmissivity, concept of Black body, Laws of Radiation, Kirchhoff's law,
Planck's law, Weins law, Stefan Boltzman's law.
(7)
RADIANT HEAT TRANSFER: Heat Exchange by radiation between two finite parallel
surfaces, Electrical analogy, solid angle and Radiation intensity, radiant heat transfer between
two finite black and gray surfaces, shape factor, Radiation shields.
(8)
TEXT BOOKS:
1. Heat and Mass Transfer Sachdeva, New Age India, New Delhi
2. Heat TransferRajput, Laxmi publ, New Delhi.
REFERENCE BOOKS:
1. Heat transfer - J.P.Holman, MGH, New York.
2. Heat transfer - S.P.Sukhatme, TMH.
3. Heat Transfer Cengel and Boles, TMH, New Delhi
NOTE: Heat and Mass Transfer Data Book by Kothandaraman and Subramanian to be
allowed in University Examination.
Lectures
Final Exam
MANUFACTURING ENGINEERING
14ME604
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
JIGS & FIXTURES : Introduction, design considerations in jigs & fixtures. The principle of six
point location, locating pins. Clamping and clamping devices. A few examples of drilling jigs
like box type, template jig, Inverted jig, indexing jig, fixtures Lathe, milling
(8)
GEAR MANFUACTURING : Introduction to various gear manufacturing methods, gear
shaping, gear hobbing, bevel gear generation - principles and methods, gear finishing methods.
(5)
THREAD MANUFACTURING PROCESSES : Thread rolling, thread milling, thread
grinding.
(2)
UNIT II
UNCONVENTIONAL MACHINING PROCESSES : Introduction, principles of operation,
equipment and applications of AJM, USM, WJM, EDM, ECM, CHM, EBM, LBM and PAM
(15)
UNIT III
PRESS WORKING TOOLS : Major components of a press, shear action in die cutting
operation, centre of pressure and its calculation, scrap strip layout for blanking.
(6)
Types of dies compound die, combination die, progressive die.
(3)
Drawing die Calculation of blank size, number of draws, percentage reduction, radius on punch
and die, total drawing force.
(3)
Bending die Bending methods, spring back, bending allowance, bending force.
(3)
UNIT IV
COMPUTER AIDED INSPECTION : Types of CMM (Coordinate Measuring Machines),
CMM construction, CMM operation and programming, CMM software, Flexible inspection
systems, CMM applications and benefits.
(8)
Machine vision, principle and introduction to stages in machine vision, image acquisition and
digitization, image processing and analysis, interpretation, machine vision applications. (7)
Text Books:
1.A Text book of Production Engineering by P.C.Sharma, S.Chand & Co.
2.Manufacturing Science by Ghosh & Mallik,
Reference Books:
1.Manufacturing engineering & technology by Kalpakjian, Pearson Education / PHI
2.Engineering metrology by R.K.Jain, Dhanpathrai & Sons
3.Automation, production systems & CIM by M.P.Groover, Pearson Education / PHI
Lectures
Final Exam
ELECTRONICS & MICRO-PROCESSORS

14ME605
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
BASIC ELECTRONIC DEVICES:
PN junction diode: Principle, characteristics: Zener diode : Principle, characteristics, Rectifiers:
Definition, Half wave rectifier, Full wave rectifier; BJT: Principle & operation, Input,& output
characteristics, Transistor as a switch, Transistor as an amplifier.
FET: Principle & operation, characteristics of JFET, & MOSFET & of JEET., its characteristics.
(15)
UNIT II
ANALOG ELECTRONICS: Operation amplifiers: Definition of op-Amplifiers, Block diagram
of op Amp, details of op Amp characteristics, Op Amp Configurations: Inverting
configuration, Non- Inverting configuration.
OP AMPLIFIERS APPLICATIONS:
Summing
Amplifier, Difference Amplifier,
Integrator, Differentiator, Instrumentation amplifier, Comparator, Schmitt trigger.
(15)
UNIT III
DIGITAL ELECTRONICS: Number systems: Decimal, Binary Octal, Hexa decimal
number systems, Number system conversions.
Codes: BCD Code, Excess 3 code.
Boolean Algebra & LogicGates: Boolean Logic Postulates. Basic logic gates, Universal Logic
gates, Boolean expression simplification using K Map Method up to 4 variables.
Combinational Logic Circuits: Definition, Combinational circuit design Procedure, Design of
Combinational Circuits: half Adder, Full adder, Half Sub tractor, Full Sub tractor, Decoder,
Encoder, Multiplexer, De Multiplexer.
SEQUENTIAL LOGIC CIRCUITS: Definition, Flip flops: SR, JK, T, D., Race around
condition, Master slave J.K.Flip - flop, Counters: Asynchronous versus synchronous counters,
Design of ripple counters, shift registers.
(15)
UNIT IV
INTRODUCTION MICROPROCESSORS: Intel 8085 architecture, Pin diagram, Instruction
set OF 8085, Addressing Modes, Development of simple assembly language Programs.
(15)
TEXT BOOKS:
1. Microprocer & Architectures, Programming & applications with the 8085/8080 A by
Gaoneker. for Unit - IV
2. Digital Logic and Computer Design by M.Morris mano, PHI for unit 3.
3. Semiconductor devices & Circuits by B.P. Singh for chapter 2 of Unit I (Dhanpati Rai)
Linear integrated circuits by D.Roy Chaudary& S.Jain(New - age international).
Lectures
Final Exam
OPERATIONS MANAGEMENT
14ME606/A
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT-I
Forecasting: Introduction, types of forecasting and their uses, General principles of forecasting,
forecasting techniques: qualitative and quantitative methods of Forecasting.
(7)
Production Systems: Types of production systems: job, batch, mass and flow type production.
(3)
Plant Location: Factors affecting the plant location, comparison of rural and urban sites
(2)
Plant Layout: Introduction, objectives, principles of plant layout, factors affecting the plant
layout, types of plant layouts
(3)
UNIT-II
Materials Management: Introduction, functions of materials management, inventory, inventory
management, types of inventories, Selective inventory control techniques: ABC analysis, VED
analysis, Inventory control systems: PSystem and Q-System, problems, Material Requirement
Planning: Introduction, Inputs, outputs and MRP logic.
(15)
UNIT-III
Aggregate Planning: Introduction, aggregate planning strategies, aggregate planning methods:
mathematical planning models, heuristic and computer search models, problems.
(10)
Line Balancing: Relevant terms used, line balancing methods, problems.
(5)
UNIT-IV
Scheduling: Introduction, difference with loading, scheduling policies, techniques, standard
scheduling methods.
(10)
Contemporary management techniques: Introduction to MRP-II, JIT, ERP and Supply chain
management.
(5)
TEXT BOOKS:
1. Operations Management -Joseph. G.Monks, International (3rd) Edition
2. Elements of Production Planning and Control / Samuel Eilon.
3. Modern Production/ operation managements / Baffa & Rakesh Sarin
REFERENCES:
1. Operations Management S.N. Chary.
2. Inventory Control Theory and Practice / Martin K. Starr and David W. Miller.
3. Production And Operation Management / Martand Telsang
4. Production Control A Quantitative Approach / John E. Biegel.
5. Production Control / Moore.
REFRIGERATION AND AIR CONDITIONING

14ME606/B
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
INTRODUCTION TO REFRIGERATION: Necessity and applications, unit of refrigeration
and C.O.P, mechanical refrigeration, types of ideal cycle of refrigeration, Refrigerants- desirable
properties, commonly used refrigerants, nomenclature.
(6)
AIR REFRIGERATION: Bell Coleman cycle and Brayton cycle, Open and Dense air systems,
Actual refrigeration system, refrigeration needs of aircrafts, adoption of air refrigeration,
Justification, types of systems, problems.
(9)
UNIT II
VAPOUR COMPRESSION REFRIGERATION: Working principle, essential components of
plant, simple vapor compression refrigeration cycle, Multi pressure systems multistage
compression, multi evaporator system, Cascade system, use of p h charts, problems.
(8)
SYSTEM COMPONENTS: Compressors- general classification, comparison, advantages and
disadvantages, Condensers - classification, working, Evaporators - classification, working,
Expansion devices - types, working.
(7)
UNIT III
VAPOUR ABSORPTION SYSTEM: Calculation of max COP, description and working of
NH3 - water system, Li - Br, H2O system, principle of operation of three fluid absorption system
and salient features.
(10)
STEAM JET REFRIGERATION: Principle of working, application, merits and demerits.
(2)
NON-CONVENTIONAL REFRIGERATION METHODS: Principle and operation of
thermoelectric refrigerator and Vortex tube or Hirsch tube.
(3)
UNIT IV
INTRODUCTION TO AIR CONDITIONING: Psychrometric properties and processes,
sensible and latent heat loads, Sload characterization and SHF, need for ventilation, infiltration,
concepts of RSHF, ASHF, ESHF & ADP, concept of human comfort and effective temperature,
comfort air conditioning, industrial air conditioning requirements, air conditioning load
calculations.
(9)
AIR CONDITIONING SYSTEMS: Classification of equipment, cooling, heating,
humidification and dehumidification, filters, grills and registers, deodorants, fans and blowers,
heat pump, heat sources, different heat pump circuits, application.
(6)
TEXT BOOKS:
1. Refrigeration and air conditioning - C.P.Arora, TMH.
2. Refrigeration and Air conditioning - Manohar Prasad, New Age India, New Delhi.
3. A course in refrigeration and air conditioning - S.C.Arora & Domkundwar, Dhanpat Rai&
sons, New Delhi.
REFERENCE BOOKS:
1. Principles of Refrigeration - Dossat.
2. Refrigeration and air conditioning - Stoecker.
NOTE: Refrigeration and Air conditioning Data book by Manohar Prasad is allowed in the
exam
Lectures
Final Exam
FLUID POWER & CONTROL SYSTEMS

14ME606/C
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
HUDRAULIC PUMPS & PRESSURE REGULATION:
Fundamental principles of industrial drives. Pressure regulation, pump types: Gear Pump, Vane
Pump, Piston Pump, Combination Pumps. Selection and specification of pumps, pump
characteristics
[9]
AIR COMPRESSORS TYPES: Piston, Screw rotary and Dynamic compressors
[6]
UNIT II
HYDRAULIC & PNEUMATIC ACTUATORS:
Linear and Rotary Actuators-Selection, Specification and Characteristics, Hydraulic and
pneumatic accessories
[15]
UNIT III
CONTROL AND REGULATION ELEMENTS:
Pressure-direction and flow control valves, Relief valves, non return and safety valves-actuation
systems
[15]
UNIT IV
HYDRAULIC CIRCUITS
Reciprocation, quick return, Sequencing synchronizing circuits-accumulator circuits-industrial
circuits-press circuits-hydraulic milling machine-grinding, planning, copying, forklift, earth
mover circuits-design and selection of components-safety and emergency mandrels.
[15]
Text Book:
1. Andrew Parr, "Hydraulics and Pneumatics", (HB), Jaico Publishing House, 1999
2. R.Srinivasan,Hydraulic and Pneumatic controls, Vijay Nicole imprints Pvt Ltd
References:
1. Antony Esposito, "Fluid power with Applications", Prentice Hall, 1980
2. Dudley Appease and John J.Pippenger, "Basic Fluid Power", Prentice Hall, 1987
HEAT TRANSFER LAB

14MEL601
Practicals
Final Exam
: 3 Periods/Week
: 3 hours
Final Exam Marks
Conduct Tests on Any Ten of the Following:

1. Refrigeration Test Rig
2. Air Conditioning Test Rig
3. Heat Exchanger Parallel Flow
4. Heat Exchanger Counter Flow
5. Composite Slab / Metal Rod
6. Critical Heat flux Apparatus
7. Emissivity Apparatus
8. Pin fin Natural Convection
9. Pin fin Forced Convection
10. Insulating powder Apparatus
11. Drop wise and film wise condensation Apparatus
12. Forced Convection Apparatus
13. Stefan Boltzmanns Apparatus
14. Lagged pipe Apparatus
: 40
: 60
CAD MODELLING LAB

14MEL602
Practicals
Final Exam
: 3 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
3D modelling using any of the modelling packages like CATIA, Pro/ENGINEER, Uni-Graphics,
Solid Works, Ideas, AutoDesk Inventor etc.
List of Modules to be Covered:

SKETCHER
PART MODELLING
ASSEMBLY MODELLING
DRAFTING
Draw the following Assembly drawings (Any three) :
1) Screw Jack.
2) Stuffing Box.
3) Eccentric.
4) Universal Joint
5) Connecting Rod.
Parts and Assemblies can be chosen from
1). A Text book of Machine Drawing by K. L. Narayana, P. Kannaiah, K. Venkata Reddy.
ELECTRONICS LAB
14ECL603
Practicals
Final Exam
: 3 Periods/Week
: 3 hours
Final Exam Marks
(Any Ten Experiments)

1. VI characteristics of PN junction diode
2. VI characteristics of Zener diode
3. Half wave rectifier with and without filter
4. Common emitter configurations (BJT)
5. Characteristics of JFET
6. Characteristics of UJT
7. Logic gates using discrete components
8. Logic gates using universal gate (NAND gate)
9. Combinational Circuits (half adder, full adder, half subtractor)
10. Verification of Flip-Flop (JK & D etc.,)
11. Code converters (Gray to Binary & Binary to Gray)
12. Multiplexer and Demultiplexer
13. Addition of two numbers using 8085 Microprocessor
14. Subtraction of two numbers using 8085 Microprocessor
15. Addition of n-numbers using 8085 Microprocessor
: 40
: 60
INDUSTRIAL MANAGEMENT AND ENTREPRENEURSHIP DEVELOPMENT

14ME701
IVYear B.Tech. (Mech) Seventh Semester
Lectures
: 4 Periods/Week
: 40
Final Exam
: 3 hours
Final Exam Marks
: 60
UNIT-I
Management: Introduction, levels of management, evolution of management thought: Taylors
Scientific Management, Henry Fayols Principles of Management, Functions of management
(5)
Organization:Introduction,principles and types of organization structures
(5)
Marketing: Introduction, marketing vs selling, marketing mix, distribution channels, product life
cycle.
(5)
UNIT-II
Productivity: Introduction, methods to measure productivity, measures to improve productivity.
(3)
Work study - Introduction, objectives, method study - objectives, steps involved, various types
of associated charts, difference between micromotion and memomotion studies, Work
measurement - techniques, time study - steps involved, equipment, different methods of
performance rating- allowances, standard time calculation.
(12)
UNIT-III
Statistical Quality Control: Introduction, techniques, variable control charts mean chart and
range charts, attribute control charts: p charts and c charts, Acceptance sampling: single
sampling and double sampling plans ,OC Curves.
(7)
Human Resource Management: Introduction, functions of HRM, Job Evaluation, different
types of evaluation methods. Job description, merit Rating, difference with job evaluation,
different methods of merit ratings.
(5)
Wage Incentives Plans: Introduction, different types of wage incentive plans with merits and
demerits
(3)
UNIT-IV
Entrepreneur Development: Introduction, Entrepreneural characteristics, Functions of an
Entrepreneur; Factors affecting entrepreneurship; Role of communication in entrepreneurship;
Entrepreneurial development-Objectives, Need of Training for enterprises; Finance for the
enterprises; Product, Process and Plant Design- Product analysis and Product Design process.
Steps in process design and plant design.
(15)
TEXT BOOKS:
1. Manufacturing Organization and Management / Amrine / Pearson Education
2. Industrial Engineering and Management / O.P. Khanna / Dhanpat Rai.
3. Principles of Motion and Time Study / Ralph Barnes
4. Work study / ILO
REFERENCES:
1. Management / Stoner, Freeman, Gilbert / Pearson Education, New Delhi
2. Production and Operations Management / Panner Selvam
3. Operations Management / Chase, Jacobs, Aquilano / Tata McGraw-Hill.
4. Human Resource Management / Gary Dessler / Pearson Education.
5. Marketing Management / Phillip Kotler / Pearson Education.
6. Management Science / A.R.Aryasri / Tata McGraw-Hill.
7. The Essence of Small Business, Barrow colin.
8.Small Industry Ram K Vepa.
DESIGN OF MACHINE ELEMENTS-III

14ME702
Lectures
Final Exam
: 4 Periods/Week, Tutorial :1
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
SPRINGS: Introduction, Materials, Types of springs, Helical springs under axial load, Fatigue
loading,
Torsion
springs,
Spiral
springs,
leaf
springs.
(15)
UNIT II
BRAKES AND CLUTCHES:- Introduction to Brakes, Types, Analysis and design of block
brakes, band brakes, Internal shoe brakes, external shoe brakes, pivoted shoe brakes,
Temperature rise, Friction materials, Clutches, Analysis and design of simple and multiple disc
clutches, cone clutches and centrifugal clutches, friction materials, comparison of brakes and
clutches.
(15)
UNIT III
FLYWHEEL: Introduction, construction, Torque analysis, solid flywheel, Rimmed flywheel,
stresses
in
rimmed
flywheel,
Design
of
flywheel.
(15)
UNIT IV
I.C.ENGINE COMPONENTS: Introduction, Design of trunk type piston, connecting rod and
crank
shaft.
(10)
OPTIMUM DESIGN: Optimization functions of single variable and multi variables,
optimization
techniques,
Interval
halving
and
Golden
section
methods.
(5)
TEXT BOOKS:
2.Machine Design by Sharma & Purohit.
1.Design data book, P.S.G. College of Tech, Coimbatore
2.Design data book, Mahadevan & Balaveera Reddy - CBS Pub.
ENGINEERING METROLOGY & MECHANICAL MEASUREMENTS

14ME703
Lectures
: 4 Periods/Week
: 40
Final Exam
: 3 hours
Final Exam Marks
: 60
METROLOGY :
UNIT - I
INTRODUCTION: Elements of engineering measurements, standards of length, end and line
standards. Theory of limits, Fits, Tolerances and their selection, Hole Basis and shaft basis
system, IS system of limits & fits, simple problems. Interchangeability, Selective Assembly,
GAUGES: Limit gauges, Taylors Principle of limit gauging, plug gauges, Ring gauges and
design of plain cylindrical plug and ring gauges. Slip gauges, angle gauges, sine bars, spirit
levels.
(15)
UNIT II
COMPARATORS:
Sigma comparator, Solex pneumatic gauge, electrical & electronic comparator, projectors, Tool
Makers Microscope, Auto collimator, bore gauges, straight edges, angle plates.
MEASUREMENT OF SURFACE FINISH: Surface texture, roughness , waviness, Indian
standard terminology, Various methods of measuring surface finish, Tomilson surface meter and
Taylor Hobson Talysurf.
MEASUREMENT OF SCREW THREADS: Introduction-Types of threads-Measurement of
outside diameter,inner diameter,effective diameters.
MACHINE TOOL PERFORMANCE TESTS: Static and Dynamic alignment testsAlignment tests on Lathe, Universal Milling Machine and Pillar Drilling Machines.
(15)
MEASUREMENTS:
UNIT - III
BASIC CONCEPTS: Introduction, Measurement system elements, Definition of terms:
Calibration, standards, Accuracy, Precision, Sensitivity, Resolution.
(3)
STRAIN MEASUREMENT:
Introduction, electrical resistance strain gauges principle, Method of fixing and bridge circuits
for measuring strain changes, Gauge factor, Temperature compensation strain gauge. Rosette,
Strain gauge applications.
(6)
FLOW MEASUREMENT:
Introduction. Variable head flow meters, orifice, Pitot tube, variable area flow meters, Hot-wire
anemometer. Flow visualization methods.
(6)
UNIT - IV
PRESSURE MEASUREMENT:
Introduction, pressure measurement terms, Pressure units, Bourdon tube pressure gauge,
Diaphragm and Bellows, Bridgeman gauge, Low pressure measurement: McLeod gauge, thermal
conductivity gauge.
(6)
TEMPERATURE MEASUREMENT:
Introduction, Liquid in glass thermometers, Bi-metallic thermometers, Thermo-Resistive
elements, Thermocouples, Thermisters and Pyrometers.
(4)
FORCE AND TORQUE MEASUREMENT: Introduction, Elastic force meters, Load cells.
Dynamo meters, Mechanical ,Electrical & Transmission Dynamometers.
(5)
TEXT BOOKS:
1. Metrology - R.K.Jain , Khanna publishers
2. Mechanical Measurements & Control - by D.S. Kumar ,
REFERENCE BOOKS:
1 Engg.Metrology D.M.Antony
2. A text book of Engg.Metrology I.C.Gupta.
3. Mechanical Measurements - by T.G. Beckwith & N.L.Buck
4. Experimental Methods for Engineers by J.P.Hollman, TMH.
COMPUTER AIDED MANUFACTURING

14ME704
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Automation : Automation in production systems automated manufacturing systems,
computerized manufacturing support systems, reasons for automating, merits and demerits,
automation principles and strategies, manufacturing industries and products, manufacturing
operations processing and assembly operations, other factory operations, Production Concepts.
(8)
Tranfer lines: fundamentals of automated production lines, system configurations, workpart
transfer mechanism, storage buffers, control of the production line. Applications of automated
production lines
Automatic lathes: Classification of automatic machines; single spindle automatic machines &
Multi spindle automatic machines
(7)
UNIT II
NUMERICAL CONTROL : Introduction, basic components of an NC system, classifications
of NC systems, nomenclature of NC machine axes, interpolation methods, features of CNC, the
machine control unit for CNC, CNC software, direct numerical control, distributed numerical
control, applications of NC, advantages and disadvantages of NC, adaptive control machining.
(15)
UNIT III
NC PART PROGRAMMING : NC coding systems, manual part programming, simple
examples on drilling, milling and turning operations, computer assisted part programming, part
programming with APT language, simple examples in drilling and milling operations.
(15)
UNIT IV
GROUP TECHNOLOGY & CELLULAR MANUFACTURING : Introduction, part families,
parts classification and coding, features of parts classification of coding system, selecting a
coding system, developing coding system in an industry OPITZ , MICLASS, Product Flow
Analysis, composite part concept, machine cell design, applications.
(6)
COMPUTER AIDED PROCESS PLANNING : Introduction, retrieval CAPP system,
generative CAPP systems, benefits of CAPP.
(3)
FLEXIBLE MANUFACTURING SYSTEMS : Introduction, types of FMS, components, FMS

layout configurations, computer control system, human resources, applications and benefits. (4)
Introduction to Computer Integrated Manufacturing.
(2)
TEXT BOOK:
1.Automation, Production systems and Computer Integrated Manufacturing by M.P.Groover,
Pearson Education / PHI.
REFERENCE BOOKS :
1.CAD/CAM by M.P.Groover and E.W.Zimmers, Pearson Education / PHI.
2.CAD/CAM by P.N.Rao, TMH
3.Production Engineering by P.C.Sharma
FINITE ELEMENT METHODS

14ME705/A
Lectures
Final Exam
: 3 hours
Final Exam Marks
: 40
: 60
UNIT - I
FUNDAMENTAL CONCEPTS: Introduction, historical background, Analysis of 3-D stresses
& strains, stress-strain relations, stress cubic, principal stress caliculations, temperature effects,
potential energy and equilibrium, the Rayleigh-Ritz method, Weighted Residual Method,
Galerkins method, Saint venants principle, Von Mises stress.
(15)
UNIT- II
BASIC CONCEPTS OF F.E.M. AND ONE DIMENSIONAL PROBLEMS : Fundamental
concepts, Finite Element Modeling, Coordinates and Shape functions, The Potential Energy
Approach, The Galerkin Approach, Assembly of the Global Stiffness Matrix and Load Vector,
Properties of Global Stiffness Matrix, The Finite Element equations; Treatment of boundary
conditions, Examples of Axially Loaded Members.
(8)
ANALYSIS OF PLANE TRUSSES : Introduction, Plane Trusses: Local and Global
Coordinate systems, Element Stiffness Matrix, Stress Calculations, Example of plane Truss with
three members.
(7)
UNIT- III
TWO DIMENSIONAL PROBLEMS : Introduction, Plane Stress and Plane Strain, Finite
Element Modeling, Constant Strain Triangle (CST); Iso-parametric representation, Potential
Energy Approach, Element Stiffness, Force terms, Galerkin Approach, Stress calculation,
Problem modeling and boundary conditions, Examples of plane Stress and plane Strain problems
with three degrees of freedom using CST Element.
(15)
UNIT- IV
Axi-Symmetric solids subjected to Axi-Symmetric loading : Introduction, Axi-Symmetric
formulation, FEM using triangular element,Strain displacement relation,load vector calculations.
(5)
Scalar Field Problems : Introduction, steady-state heat transfer, one-dimensional heat
conduction, governing equation, boundary conditions, the one dimensional element, functional
approach for heat conduction.
(10)
Text Books:
1.Introduction to Finite Elements in Engineering by Chandrupatla & Belegundu, PHI.
2. Finite Element Analysis by P.Seshu, PHI publications
References:
1. Finite Element Analysis by C.S.Krishna Moorthy.
2. Finite Element Analysis by L.J.Segerlind.
3. Cook, Robert Davis et al, "Concepts and Applications of Finite Element
Analysis" , Wiley, John & Sons,1999
4. George R Buchanan, "Schaum's Outline of Finite Element Analysis",
McGraw Hill Company, 1994.
5. David V. Hutton, Fundamentals of Finite Element Analysis Mc Graw Hill Company.
COMPUTATIONAL FLUID DYNAMICS

14ME705/B
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
INTRODUCTION:-CFD as a design tool, as a research tool, impact of CFD, Applications.
(3)
GOVERNING EQUATIONS: - Continuity, Momentum and Energy equations in3 Dimensions,
Navier-Stokes equations, Single Generic Integral form equations for Continuity, Momentum and
Energy.
(12)
UNIT II
DISCRETIZATION:-Basic aspects of discretization, Techniques used--Finite Difference,
Finite Volume and Finite Element, comparison of methods, difference equations, Explicit and
Implicit approaches.
(15)
UNIT Ill
GRID GENERATION AND TRANSFORMATION:-Generation of grid, Transformation of
non- uniform grids, General transformation of equations, form of governing equations suitable
for CFD, Compressed grids, Boundary filled coordinate systemsElliptic grid generation,
Adaptive grids, Modern developments in grid generation.
(15)
UNIT IV
CFD TECHNIQUES:-Introduction, LAX-WENDORFF technique, MACCORMICK technique,
CRANK-NICHOLSON technique, Relaxation technique, ADI technique, suitability for different
conditions. Aspects of numerical dissipation and dispersion.
(15)
TEXT BOOKS:
1. Computational Fluid Dynamics, Basics with ApplicationsANDERSON Jr.-MGH, 1995
2. Numerical Heat Transfer and Fluid FlowPATANKAR-Hemisphere, NY, 1980
REFERENCE BOOK:
1. Computational Fluid Dynamics for EngineeringHOFFMAN K.A. - Engineering Education
System, Austin, TX, 1989
Lectures
Final Exam
MECHATRONICS
14ME705/C
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
INTRODUCTION TO MECHATRONICS, sensors & transducers: Introduction, performance
terminology, classification of sensors, selection of sensors.
Signal Conditioning: Introduction data acquisition Quantizing theory, analog to digital
conversion, digital to analog conversion.
Data Presentation Systems: Data presentation elements magnetic displays, data acquisition
systems, systems measurement, testing and calibration.
15
UNIT II
ACTUATION SYSTEMS: Pneumatic and hydraulic actuation systems, stepper motors.
System Models: Modeling of one and two degrees of freedom mechanical, electrical, fluid and
thermal systems. Block diagram representations for these systems.
15
UNIT III
DYNAMIC RESPONSE of systems zero order, First order and second order systems. Block
diagram representation, Transfer function. Systems in series, Systems with feed back loops.
CLOSED LOOP CONTROLLERS : Continuous and discrete processes, control modes, two
step, proportional , derivative, integral, PID controllers.
15
UNIT IV
PLC : Introduction, basic structure, I/P, O/P, processing, programming, ladder diagrams, timers,
internal relays and counters, data handling, analogue input and output selection of PLC.
DESIGN: Designing mechatronics systems, possible design solutions, case studies of
mechatronics systems pick and place robot.
15
Text book:
1. W.Bolton., Mechatronics-Electronic control systems in Mechanical and Electrical
Engineering, 4th edition, Pearson Education Limited, New Delhi.
REFERENCE BOOKS:
1.David G.Alciatore, Michael B.Histand, Introduction to Mechatronics and Measurement
systems, Special Indian Edition 2007, Tata McGraw-Hill publishing Company Limited, New
Delhi.
2.K.P.Ramachandran, G.K.Vijaya Raghavan, M.S.Balasundaram, Mechatronics- Integrated
Mechanical Electronic systems, 1st edition, Wiley India Pvt Limited, New Delhi.
3.Devdas Shetty, Richard A.Kolk, Mechatronics System Design, 2nd Indian reprint, Thomson
India edition (Cengage Learing (India) Pvt Limited.
4.M.D.Singh, J.G.Joshi, Mechatronics 2nd printing, PHI Learning Private Limited, New Delhi.
5.Godfey C.Onwubolu, Mechatronics- Principles and Applications, First printed in India 2006,
Elsevier India Private Limited.
6.Newton C.Braga, Mechatronics Source book, First Indian reprint 2009, Cengage Learing
(India) Pvt Limited.
7.Nitaigour Premchand Mahalik, Mechatronics- Principles, Concepts and Applications,
Second reprint 2006, Tata McGraw-Hill publishing Company Limited, New Delhi.
8.W.Bolton, Programmable logic controllers Fourth edition, Newnens-An Imprint of Elsevier
2009.
Lectures
Final Exam
SOLAR ENERGY AND UTILIZATION

14ME705/D
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Introduction, Energy alternative, Devices for thermal collection and storage, Thermal
applications.
Solar radiation: Instruments for measuring solar radiation, Solar radiation geometry, Empirical
equations for prediction of availability of solar radiation, Solar radiation on tilted surfaces.
UNIT II
Liquid flat- Plate Collectors: General performance analysis, Transmissivity, absorptivity, product
and overall loss coefficient and heat transfer correlations, Collector efficiency factor, Numerical.
Analysis of collectors similar to the conventional collector. Testing procedures, Alternatives to
the conventional collector,Numerical.
Solar Air Heaters: Performance analysis of a conventional air heater, Other types of air heaters.
Concentrating Collectors: Flat plate collectors with plane reflectors, Cylindrical parabolic
collector,
compound parabolic dish collector ,central receiver collector, numerical.
UNIT III
Thermal energy storage: Sensible heat storage, Latent heat Storage, Thermochemical storage
.Solar
distillation: Introduction, working principal of solar distillation, Thermal efficiency of distiller
unit, External heat transfer, Top loss coefficient, Bottom and side loss coefficient, Internal heat
transfer, Radioactive loss coefficient, connective loss coefficient, Evaporative loss coefficient,
Overall heat Evaluation of distillation output, Passive solar stills, Conventional solar still, Basin
construction, Thermal analysis of conventional solar still.
UNITIV
Photovoltaic Systems: Introduction, doping Fermi level, P-N junction characteristics,
Photovoltaic effect, Photovoltaic material, Module, Cell temperature, Numerical. Economic
analysis: Introduction, cost analysis.
TEXT BOOK:
1. Solar Energy: Thermal Processes, by Duffie John A, and Beckman W.A, john Wiley and
Sons.
2.Solar
Energy,
by
S.P
Sukhatme,
Tata
Mc
Graw
Hill.
3.Treatise
on
Solar
Energy,
by
H.P
Garg,
john
Wiley
and
Sons.
4. For more details : visit http://www.uktech.in
OPEN ELECTIVE OPEN ELECTIVE

INDUSTRIAL POLLUTION & CONTROL
14OE706/ChE01
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Man & Environment, Types of Pollution, Pollution control aspects, Industrial emissions-Liquids,
Gases, Environmental Legislation, Water quality management in India, Air (Prevention &
Control of Pollution) Act.
UNIT II
Removal of BOD, Biological oxidation, Anaerobic treatment, Removal of Chromium, Removal
of Mercury, Removal of Ammonia, Urea, Treatment of Phenallic effluents.
UNIT III
Removal of Particulate matter, Removal of Sulfur Oxides, Removal of Oxides of Nitrogen,
Removal of Organic vapors from Effluent.
UNIT IV
Pollution control in Chemical Industries, General considerations, pollution control aspects of
Fertilizer industries, Pollution control in Petroleum Refineries and Petrochemical units, Pollution
control in Pulp and Paper Industries.
TEXT BOOK:
1. Pollution control in Process Industries, S.P .Mahajan, Tata McGraw Hill Publishing
Company Ltd, New Delhi
REFERENCE BOOKS:
1. Environmental Pollution Control Engineering, C.S.Rao, Wiley Eastern Ltd., New Age
International Ltd.,
2. Air pollution, M.N.Rao, H.V.N.Rao, Tata McGrawhill.
3. Water Pollution control, W.Wesley Eckenfelder Jr.Industrial, Tata McGrawHill.
OPEN ELECTIVE
ENERGY ENGINEERING
14OE706/ChE02
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Conventional energy resources, the present scenario, scope for future development.
Coal: Origin, occurrence and reserves, classification, ranking, analysis and testing, coal
carbonization, manufacture of coke, coal gasification, coal liquefaction.
UNIT II
Petroleum: Origin, occurrence and reserves, composition, classification, characteristics,
exploration and production.
Petroleum Refining: Refinery processes, petroleum products, testing and analysis of petroleum
products.
UNIT III
Non conventional energy sources: Solar energy, solar radiation, principles of heating and
cooling, photo voltaic cells.
Bio gas products, bio-mass, wind energy, hydrogen energy, geothermal and ocean thermal
energy, fuel cells.
UNIT IV
Energy storage, mechanical energy storage, water storage, solar pond, phase change storage,
chemical storage.
Energy Conservation: Conservation methods in process industries, Theoretical analysis,
practical limitations, equipment for energy saving / recovery.
TEXT BOOKS:
1. Conventional Energy technology, S.B.Pandy, Tata McGraw Hill
2. Fuel Science, Harker and Allen, Oliver & Boyd.
3. Energy conversion, Culp, Mc Graw Hill.
OPEN ELECTIVE
AIR POLLUTION AND CONTROL
14OE706/CE 01
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Air Pollution Definitions, AirPollutantsClassifications NaturalandArtificial Primaryand
Secondary,pointandNon-Point,Line and ArealSourcesofairpollution-stationaryand mobilesources.
EffectsofAirpollutantsonman,materialand vegetation:Globaleffects ofairpollution Green
Houseeffect,HeatIslands, Acid Rains,Ozone Holesetc.
UNIT II
MeteorologyandplumeDispersion;properties
ofatmosphere;Heat,Pressure,
Windforces,MoistureandrelativeHumidity, Influence ofMeteorologicalphenomenaon Air Qualitywindrosediagrams.
UNIT III
Lapse
Rates,PressureSystems,Windsandmoistureplume
behaviorandplumeRiseModels;
GaussianModelfor Plume Dispersion.
Control ofparticulates Control atSources,Process Changes,Equipmentmodifications,Design
andoperation ofcontrol. EquipmentsSettlingChambers, Centrifugalseparators, filtersDryand
Wetscrubbers,Electrostatic precipitators.
UNIT IV
GeneralMethodsofControl
ofNOxandSox
emissionsIn-plantControl
processchanges,dryand wetmethods ofremovaland recycling.
Air QualityManagementMonitoring ofSPM,SO;NOand COEmission Standards.
Measures,
NOTE:
Two questions of 12 marks each will be given from each unit out of which one is to be answered.
Twelve questions of one mark each will be given from entire syllabus which is a compulsory
question.
TEXTBOOKS:
1.Air pollutionByM.N.Raoand H.V.N.Rao Tata Mc.GrawHillCompany.
2.Air pollutionbyWarkand Warner.-Harper&Row,NewYork.
REFERENCE BOOK:
1.An introductiontoAirpollution by R.K.Trivedy andP.K.Goel,B.S.Publications.
OPEN ELECTIVE
REMOTE SENSING AND GIS
14OE706/CE 02
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Concepts and Foundations of Remote Sensing: Introduction, Energy sources and radiation
principles, Energy interactions in the atmosphere, Energy interactions with Earth surface
features, an ideal remote sensing system, characteristics of remote sensing systems, application
of remote sensing .
UNIT II
Visual Image Interpretation: Introduction, Fundamentals of visual image interpretation, basic
visual image interpretation equipment, land use and land cover mapping, geologic and soil
mapping, agricultural applications, forestry applications, water resources applications, urban and
regional planning applications.
UNIT III
Digital Image Processing: Introduction, Image rectification and restoration, Image enhancement,
contrast manipulation, spatial feature manipulation, Image Classification, Supervised
classification, the classification stage, the training stage, Un-supervised classification,
Classification accuracy assessment.
UNIT IV
Geo-graphical Information Systems (GIS):Introduction, spatial information system: an overview,
conceptual model of spatial information, concept of databases, digitizing, editing, and structuring
map data, data quality and sources of errors in GIS, spatial data analysis (vector based), spatial
data analysis (raster based), Fundamental concepts of GPS, Types of GPS, GPS satellite,
Application of GPS in resource surveys, mapping and navigation.
TEXT BOOKS:
1. Lillisand.T.M, Keifer.R.W, and Chipman.J.WRemotesensind Image interpretation, 2004,
John Wlley and Sons.
2. Chrisman, N.R. (1997), Exploring Geographic Information systems, John Willey and sons
3. Remote Sensing and its applications by LRA Narayana University Press 1999.
4. Principals of Geo physical Information Systems - Peter ABurragh and Rachael A. Me Donnell, Oxford
Publishers 2004.
REFERENCE BOOKS:
1. Concepts & Techniques of GIS by C.P.Lo Albert, K.W. Yonng, Prentice Hall (India)
Publications.
2. Remote Sensing and Geographical Information systems by M.Anji Reddy JNTU Hyderabad
2001,
3. B.S.Publications.GIS by Kang - tsungchang, TMH Publications & Co.
4. Basics of Remote sensing & GIS by S.Kumar, Laxmi Publications.
5. Fundamental of GIS by Mechanical designs John Wiley & Sons.
OPEN ELECTIVE
DATABASE MANAGEMENT SYSTEMS
14OE706/CS01
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
(17 Periods)
Databases and Database Users: Introduction - An Example - Characteristics of the Database
Approach - Actors on the Scene - Workers behind the Scene - Advantages of Using the DBMS
Approach - A Brief History of Database Applications - When Not to Use a DBMS.
Database System Concepts and Architecture: Data Models, Schemas, and Instances - ThreeSchema Architecture and Data Independence - Database Languages and Interfaces - The
Database System Environment - Centralized and Client/Server Architectures for DBMSs Classification of Database Management Systems.
Data Modeling Using the Entity-Relationship (ER) Model: Using High-Level Conceptual
Data Models for Database Design - An Example Database Application - Entity Types, Entity
Sets, Attributes, and Keys - Relationship Types, Relationship Sets, Roles, and Structural
Constraints - Weak Entity Types - Refining the ER Design for the COMPANY Database - ER
Diagrams, Naming Conventions, and Design Issues.
UNIT II
(15 Periods)
The Relational Data Model and Relational Database Constraints: Relational Model
Concepts - Relational Model Constraints and Relational Database Schemas - Update Operations,
Transactions, and Dealing with Constraint Violations - Relational Database Design Using ER-toRelational Mapping.
SQL-99: Schema Definition, Constraints, Queries, and Views: SQL Data Definition and Data
Types - Specifying Constraints in SQL - Schema Change Statements in SQL - Basic Queries in
SQL - More Complex SQL Queries - INSERT, DELETE, and UPDATE Statements in SQL Views (Virtual Tables) in SQL.
UNIT III
(16 Periods)
Functional Dependencies and Normalization for Relational Databases: Informal Design
Guidelines for Relation Schemas - Functional Dependencies - Normal Forms Based on Primary
Keys - General Definitions of Second and Third Normal Forms, Boyce-Codd Normal Form.
Relational Database Design Algorithms and Further Dependencies: Properties of Relational
Decompositions - Algorithms for Relational Database Schema Design Multivalued
Dependencies and Fourth Normal Form - Join Dependencies and Fifth Normal Form.
UNIT IV
(16 Periods)
Introduction to Transaction Processing Concepts and Theory: Introduction to Transaction
Processing - Transaction and System Concepts - Desirable Properties of Transactions Characterizing Schedules Based on Recoverability - Characterizing Schedules Based on
serializability.
Concurrency Control Techniques: Two-Phase Locking Techniques for Concurrency Control Concurrency Control Based on Timestamp Ordering Multiversion Concurrency Control
Techniques - Validation (Optimistic) Concurrency Control Techniques - Granularity of Data
Items and Multiple Granularity Locking.
TEXT BOOK:
1. Fundamentals of Database Systems, RamezElmasri and Navate Pearson Education, 5 th
edition.
REFERENCE BOOKS:
1. Introduction to Database Systems, C.J.Date Pearson Education.
2. Data Base Management Systems, Raghurama Krishnan, Johannes Gehrke, TATA
McGrawHill, 3rdEdition.
3. Data base System Concepts, Silberschatz, Korth, McGraw hill, 5th edition.
OPEN ELECTIVE
JAVA PROGRAMMING
14OE706/CS02
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT - I
(16 Periods)
Introduction: Introduction to java, data types, dynamic initialization, scope and life time,
operators, control statements, arrays, type conversion and casting, finals & blank finals.
Classes and Objects : Concepts, methods, constructors, usage of static, access control, this key
word, garbage collection, overloading, parameter passing mechanisms, nested classes and inner
classes.
Inheritance: Basic concepts, access specifires, usage of super key word, method overriding,
final methods and classes, abstract classes, dynamic method dispatch, Object class.
Interfaces: Differences between classes and interfaces, defining an interface, implementing
interface, variables in interface and extending interfaces.
Packages: Creating a Package, setting CLASSPATH, Access control protection, importing
packages.
Strings: Exploring the String class, String buffer class, Command-line arguments.
UNIT II
(15 Periods)
Exception Handling: Concepts of Exception handling, types of exceptions, usage of try, catch,
throw, throws and finally keywords, Built-in exceptions, creating own exception sub classes.
Multithreading: Concepts of Multithreading, differences between process and thread, thread life
cycle, Thread class, Runnable interface, creating multiplethreads, Synchronization, thread
priorities.
Applets: Concepts of Applets, life cycle of an applet, creating applets, passing parameters to
applets, accessing remote applet, Color class and Graphics
UNIT-III
(16 Periods)
Event Handling: Events, Event sources, Event classes, Event Listeners, Delegation event
model, handling events.
AWT: AWT Components, windows, canvas, panel, File Dialog boxes, Layout Managers, Event
handling model of AWT, Adapter classes, Menu, Menubar.
UNIT-IV
(17 Periods)
Swing-I swings introduction, JApplet, JFrame and JComponent, Icons and Labels, text fields,
buttons The JButton class, Check boxes, Radio buttons.
JDBC Connectivity: Jdbc connectivity, types of Jdbc Drivers, connecting to the database, Jdbc
Statements, Jdbc Exceptions, Manipulations on the database, Metadata.
TEXT BOOKS:
1.
2.
The Complete Reference Java J2SE, 7th Edition, Herbert Schildt, TMH Publishing
Company Ltd, New Delhi.
Big Java, 2nd Edition, Cay Horstmann, John Wiley and Sons, Pearson Education.
REFERENCE BOOKS:
1. Java How to Program, Sixth Edition, H.M.Dietel and P.J.Dietel, Pearson Education/PHI.
2. Core Java 2, Vol 1, Fundamentals, Cay.S.Horstmann and Gary Cornell, Seventh Edition,
Pearson Education.
3. Core Java 2, Vol 2, Advanced Features, Cay.S.Horstmann and Gary Cornell, Seventh
Edition, Pearson Education.
4. Beginning in Java 2, Iver Horton, Wrox Publications.
5. Java, Somasundaram, Jaico.
6. Introduction to Java programming, By Y.DanielLiang, Pearson Publication.
OPEN ELECTIVE
OPTIMIZATION TECHNIQUES
14OE706/EE01
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Linear Programming: Introduction and formulation of models Convexity - simplex method Bid method - two phase method degeneracy nonexistent and unbounded solutions - duality
in L.P. - dual simplex method - sensitivity analysis - revised simplex method - transportation and
assignment problems.
UNIT II
Non-linear Programming: Classical optimization methods - equality and inequality constraints
- Lagrange multipliers and Kuhn-Tucker conditions - quadratic forms - quadratic programming
and Bessels method.
UNIT III
Search Methods: One dimensional optimization - sequential search - Fibonacci search - multi
dimensional search method - Univariate search - gradient methods - steepest descent / ascent
methods - conjugate gradient method -Fletcher Reeves method - penalty function approach.
UNIT IV
Dynamic Programming: Principle of optimality recursive relation - solution of linear
programming problem - simple examples
TEXT BOOKS:
1. Engineering Optimization: Theory and Practice by S.S. Rao, 3rd Ed., New Age International,
1998
2. Optimization Methods in Operations Research and Systems Analysis by K.V. Mittal and C.
Mohan, 3rd Ed, New Age International, 1996.
REFERENCE BOOKS:
1. Non-linear Programming by P.L. Mangassarian.
2. Operations Research by S.D. Sharma.
3. Operations Research: An introduction by H.A. Taha, 6th Edition, PHI.
4. Linear Programming by G. Hadley.
OPEN ELECTIVE
NON-CONVENTIONAL ENERGY SOURCES
14OE706/EE02
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Principle of Renewable Energy: Comparison of renewable and conventional energy sources Ultimate energy sources - natural energy currents on earth - primary supply to end use Spaghetti & Pie diagrams - energy planning - energy efficiency and management.
UNIT II
Solar Radiation: Extra terrestrial solar radiation - terrestrial solar radiation - solar thermal
conversion - solar thermal central receiver systems - photovoltaic energy conversion - solar cells
4 models.
UNIT III
Wind energy: Planetary and local winds - vertical axis and horizontal axis wind mills principles of wind power - maximum power - actual power - wind turbine operation - electrical
generator.
UNIT IV
Energy from Oceans: Ocean temperature differences - principles of OTEC plant operations wave energy - devices for energy extraction tides - simple single pool tidal system.
Geothermal energy: Origin and types - Bio fuels classification - direct combustion for heat
and electricity generator - anaerotic digestion for biogas - biogas digester - power generation.
TEXT BOOK:
1. Renewable Energy Sources by John Twidell& Toney Weir : E&F.N. Spon.
REFERENCE BOOKS:
1. Power plant technology by EL-Wakil, McGraw-Hill.
2. Non-Conventional Energy Sources by G.D.Rai, Khanna Pub.
OPEN ELECTIVE
CONSUMER ELECTRONICS
14OE706/EC01
Lectures
4 Periods/Week
40
Final Exam
3 hours
Final Exam Marks
60
UNIT I
Microphones, Headphones and Headsets, Loud Speakers, Disc Recording and Reproduction,
Amplifying Systems Equalizers and Mixers, Electronic Music Synthesizers.
UNIT II
Commercial Sound, Theatre Sound System, Audio Systems , Color TV standards and Systems,
Remote Controls, Video Systems.
UNIT III Electronic
Gadgets and Home Appliances:
Telecommunication Systems, Switching Systems, Modulation Techniques, Carrier Systems,
Fibre Optics
UNIT IV
Data Services, Mobile Systems, Facsimile fax, Xerography
TEXT BOOK:
1.Consumer Electronics by S.P.Bali, Pearson Education, ISBN: 9788131717592.
REFERENCE BOOKS:
1. Consumer Electronics for Engineers by Philip Herbert Hoff, Cambridge University Press
(July 28, 1998), ISBN-10: 0521582075
2. Digital Consumer Electronics Handbook by RonadlK.Jurgen, (Editor) by McGraw Hill
Professional Publishing, 1997. ISBN-10: 0070341435.
OPEN ELECTIVE
EMBEDDED SYSTEMS
14OE706/EC02
Lectures
4 Periods/Week
40
Final Exam
3 hours
Final Exam Marks
60
UNIT I
Introduction to embedded systems, design challenges, processor technology, IC technology,
design technology, tradeoffs, single purpose processor, RT level combinational logic, sequential
logic (RT level) custom single purpose processor design, optimizing custom single purpose
processors. General purpose processors: basic architecture, pipelining, programmers view,
development environment, ASIPS, microcontrollers and digital signal processors
UNIT II
State machine and concurrent process models: models vs. languages, FSMD, using state
machines, PSMM, concurrent process model, concurrent processes, communication and
synchronization among processes, data flow model and real time systems. Need for
communication interfaces, RS232/UART, RS422/RS485, USB, Infrared, IEEE 802.11, and
Bluetooth.
UNIT III
Embedded system and RTOS concepts: Architecture of kernel, tasks and task scheduler,
interrupt service routines, semaphores, mutex. Mail boxes, message queues, event registers,
pipes and signals.
UNIT IV
Embedded system and RTOS concepts: Timers, memory management, priority inversion
problem, embedded OS and real time OS, RT Linux, and Handheld OS. Design technology:
Introduction, automation, synthesis, parallel evolution of compilation and synthesis, logic
synthesis, RT synthesis, behavioural synthesis, system synthesis, HW / SW co- design,
verification, and co-simulation.
TEXT BOOKS:
1. Frank Vahid, Tony D Givargis, Embedded system design A unified HW/ SW Introduction,
John Wily & sons, 2002.
2. KVKK Prasad, Embedded and real time systems, Dreemtech Press, 2005.
REFERENCE BOOKS:
1. Raj Kamal, Embedded system architecture, programming and design, TMH edition.
2. Mohammad Ali Mazidi, Janice G., The 8051 microcontroller and embedded systems, Pearson
edition.
3. Jonathan W Valvano, Embedded Microcomputer Systems, Brooks/cole, Thompson Learning.
4. David E. Simon, An Embedded Software Primer, Pearson edition.
OPEN ELECTIVE
VIRTUAL INSTRUMENTATION USING LABVIEW
14OE706/EI01
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
REVIEW OF VIRTUAL INSTRUMENTATION: Historical perspective, Need of VI,
Advantages of VI, Define VI, block diagram & architecture of VI, data flow techniques,
graphical programming in data flow, comparison with conventional programming.
PROGRAMMING TECHNIQUES: VIS and sub-VIS, loops & charts, arrays, clusters, graphs,
case & sequence structures, formula modes, local and global variable, string & file input.
Graphical programming in data flow, comparison with conventional programming.
UNIT II
DATA ACQUISITION BASICS: ADC, DAC, DIO, Counters & timers, PC Hardware
structure, timing, interrupts, DMA, Software and Hardware Installation. GPIB/IEEE 488
concepts, and embedded system buses - PCI, EISA, CPCI, and USB & VXI. A
UNIT III
COMMON INSTRUMENT INTERFACES: Current loop, RS 232C/RS 485, GPIB, System
basics, interface basics: USB, PCMCIA, VXI, SCXI, PXI etc, networking basics for office &
industrial application VISA & IVI, image acquisition & processing, Motion Control. ADC,
DAC, DIO, DMM, waveform generator.
UNIT IV
USE OF ANALYSIS TOOLS AND APPLICATION OF VI: Fourier transforms Power
spectrum, Correlation methods, windowing & flittering. Application in Process Control projects,
Major equipments- Oscilloscope, Digital Multimeter, Pentium Computers, temperature data
acquisition system, motion control employing stepper motor.
TEXT BOOKS:
1. Gary Johnson, LABVIEW Graphical Programming , 2nd Edition, McGraw Hill, 1997.
2. Lisa K. Wells and Jeffrey Travis, LABVIEW for Everyone , PHI, 1997.
3. Skolkoff, Basic concepts of LABVIEW 4 , PHI, 1998.
REFERENCE BOOKS:
1. S. Gupta, J.P. Gupta, PC Interfacing for Data Acquisition and Process Control, ISA, 2nd
Edition, 1994.
2. Technical Manuals for DAS Modules of Advantech and National Instruments.
3. L.T. Amy, Automation System for Control and Data Acquisition, ISA, 1992.
OPEN ELECTIVE
SENSORS and TRANSDUCERS
14OE706/EI02
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Introduction: Definition related to measurements /instrumentation, static and dynamic
characteristics of instruments, classification of transducers.
UNIT II
Displacement Measurement: Variable resistance devices, variable inductance devices, variable
capacitance devices, digital displacement transducers.
Strain measurement: Stress-strain relations, resistance strain gauges, types of strain gauges,
strain gauge measurement techniques, static measurements ,dynamic measurements. Calibration
of strain gauge, strain gauge load cell, force and torque measurements using strain gauge.
UNIT III
Pressure measurement: Diaphragm, Bellows, Bourdon tubes, Resistive inductive and
capacitive transducers, piezo-electric transducers.
Low pressure measurement: McLeod gauge, Knudson gauge, Ionization gauge.
Temperature measurement: RTD, Thermocouple and thermistor.
UNIT IV
Flow measurement: Head type flow meters, Rotometer, Electromagnetic flow meter.
Measurement of liquid level, viscocity, humidity and moisture.
TEXT BOOKS:
1. A.K.Ghosh, Introduction to Instrumentation and Control, PHI.
2. BC Nakra, KK Chaudhry, Instrumentation measurement and analysis, TMH, New Delhi
second edition.
REFERENCE BOOKS:
1. PatranabisD,Sensors and transducers, second edition, PHI, New Delhi 2003.
Ernest O Doeblin, Measurement Systems Application and Design, TMH.
OPEN ELECTIVE
WEB TECHNOLOGIES
14OE706/IT01
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Introduction to XHTML, Cascading Style Sheets (CSS), JavaScript: Introduction to Scripting,
Control Statements, Part 1, Control Statements, Part 2, Functions, Arrays, Objects.
UNIT - II
Dynamic HTML: Object Model and Collections, Dynamic HTML: Event Model, XML, RSS
(Really Simple Syndication).
UNIT III
Building Ajax-Enabled Web Applications, Web Servers (IIS and Apache).
UNIT - IV
Servlets and Java Server Pages.
TEXT BOOK:
1. Harvey M. Deitel and Paul J. Deitel,Internet & World Wide Web How to Program,
4/e,Pearson Education.
REFERENCE BOOKS:
1. Jason Cranford Teague, Visual Quick Start Guide CSS, DHTML &AJAX, 4e, Pearson
Education.
2. Tom NerinoDoli smith, JavaScript & AJAX for the web, Pearson Education 2007.
3. Joshua Elchorn, Understanding AJAX, Prentice Hall 2006.
Marty Hall, Larry Brown, Core Servlets and JavaServer Pages: Volume 1: Core
Technologies, 2nd Edition, Prentice Hall.
OPEN ELECTIVE
MOBILE APPLICATION DEVELOPMENT
14OE706/IT02
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Introduction: Introduction to java, data types, dynamic initialization, scope and life time,
operators, control statements, arrays, type conversion and casting, finals & blank finals.
Classes and Objects : Concepts, methods, constructors, usage of static, access control, this key
word, garbage collection, overloading, parameter passing mechanisms, nested classes and inner
classes.
Inheritance: Basic concepts, access specifiers, usage of super key word, method overriding,
final methods and classes, abstract classes, dynamic method dispatch, Object class.
Interfaces: Differences between classes and interfaces, defining an interface, implementing
interface, variables in interface and extending interfaces.
UNIT II
Packages: Creating a Package, setting CLASSPATH, Access control protection, importing
packages.
Strings: Exploring the String class.
Exception Handling: Concepts of Exception handling, types of exceptions, usage of try, catch,
throw, throws and finally keywords, Built-in exceptions, creating own exception sub classes.
I/O Streams: Streams, Byte streams, Character streams, File class, File streams.
Event Handling: Events, Event sources, Event classes, Event Listeners, Delegation event
model, handling events.
UNIT III
Introduction: Introduction to Mobile Application Development, Constraints and requirements of
mobile Apps, Understanding the available mobile platforms
Overview of Android: Introduction to Android OS, History of Android, Versions of Android,
Android Architecture.
Understanding the development Environment: Developing Android applications using
Eclipse, creating the first Android application, Anatomy of the Android Application, Working
with the emulators.
Application Components: Activities, Services, Content Providers, Broadcast Receivers,
Understanding Activity, Activitys Life Cycle and Intents.
Creating UI for Android: Android Views and View Groups, Android Layouts, Basic Views,
Picker views, List views, Additional views (Image Views, Gallery view and Image Switcher) and
working with menus. Understanding and working with screen Orientation.
UNIT IV
Data Persistence: Shared Preferences, Working with Files, Working with databases (SQLite).
Content Providers: Accessing the Contacts using Content Providers.
Messaging &Email: Sending SMS, Sending e-mails.
Working with Location: Obtaining the location of mobile using GPS and A-GPS, Displaying
the Location on Maps.
Services and Broadcast Receivers: Working with Services and broadcast receivers.
Publishing Apps: Preparing for publishing and deploying the APK file.
TEXT BOOK:
1. The Complete Reference Java J2SE, 7th Edition, Herbert Schildt, TMH Publishing
Company Ltd, New Delhi (for UNIT I)
2. Beginning Android application development, Wei-Meng Lee, Wiley Publishing Inc.(for
UNIT II)
REFERENCE BOOKS:
1. Java How to Program, Sixth Edition, H.M.Dietel and P.J.Dietel, Pearson
Education/PHI.
2. Learn JAVA for Android Development, Jeff Friesen, Apress Publications.
OPEN ELECTIVE
AUTOMOBILE ENGINEERING
14OE706/ME01
Lectures
Final Exam
:
:
4 Periods/Week
3 hours
Final Exam Marks
: 40
: 60
UNIT I
INTRODUCTION: Classification of vehicles applications, options of prime movers,
transmission and arrangements.
(4)
ENGINE: Engine Classifications - number of strokes, cylinders, types of combustion chambers
for petrol and diesel engines, valves, valve arrangements and operating Mechanisms, Piston design basis, types, piston rings, firing order; Crankshafts, Flywheel.
(7)
ASSORTED EQUIPMENT: Fuel supply pumps, Mechanical and Electrical type Diaphragm
pumps, Air and Fuel Filters, super chargers, Mufflers.
(4)
UNIT II
COOLING SYSTEMS: Need for cooling system, Air and water cooling.
(3)
LUBRICATING SYSTEMS: Various lubricating systems for I.C. Engines.
(3)
ELECTRICAL SYSTEM: Ignition system, Spark plugs, Distributor, Electronic Ignition,

Alternator, cutout, Current and voltage regulators, charging circuit, starting motors, lighting,
instruments and accessories.
(9)
UNIT III
CHASSIS & TRANSMISSION SYSTEMS: Introduction to Chassis & Transmission, Clutches
Single-plate and Multi-plate clutches, Centrifugal clutches, wet and dry type, actuating
mechanisms.
(7)
TRANSMISSION: Gear Box - Theory, Four speed and Five Speed Sliding Mesh, Constant
mesh & synchromesh type, selector mechanism, automatic transmission, overdrive, propeller
shaft, differential - principle of working.
(8)
UNIT IV
SUSPENSION SYSTEMS: Need for suspension systems, springs, shock absorbers, axles
front and rear, different methods of floating rear axle, front axle and wheel alignment.
(8)
VEHICLE CONTROL: steering mechanisms and power steering, types of brakes and brake
actuation mechanisms (air and hydraulic).
(7)
TEXT BOOKS:
1. Automobile Engineering - G.B.S.Narang.
2. Automobile Engineering -R.B.Gupta
3. Automobile Engineering - Vol I & II - Kirpal Singh
REFERENCE BOOKS:
1. Automotive Mechanics - Joseph Heitner
2. Automobile Engineering -S.Srinivasan
OPEN ELECTIVE
REFRIGERATION AND AIR CONDITIONING
14OE706/ME02
Lectures
Final Exam
:
:
4 Periods/Week
3 hours
Final Exam Marks
: 40
: 60
Note: Qualitative treatment

UNIT I
INTRODUCTION TO REFRIGERATION: Necessity and applications, unit of refrigeration
and C.O.P, mechanical refrigeration, types of ideal cycle of refrigeration, Refrigerants- desirable
properties, commonly used refrigerants, nomenclature.
(6)
AIR REFRIGERATION: Bell Coleman cycle and Brayton cycle, Open and Dense air systems,
Actual refrigeration system, refrigeration needs of aircrafts, adoption of air refrigeration,
Justification, types of systems
(9)
UNIT II
VAPOUR COMPRESSION REFRIGERATION: Working principle, essential components of
plant, simple vapor compression refrigeration cycle, Multi pressure systems multistage
compression, multi evaporator system, Cascade system, use of p h charts
(8)
SYSTEM COMPONENTS: Compressors- general classification, comparison, advantages and
disadvantages, Condensers - classification, working, Evaporators - classification, working,
Expansion devices - types, working.
(7)
UNIT III
VAPOUR ABSORPTION SYSTEM: Calculation of max COP, description and working of
NH3 - water system, Li - Br, H2O system, principle of operation of three fluid absorption system
and salient features.
(10)
STEAM JET REFRIGERATION: Principle of working, application, merits and demerits.
(2)
NON-CONVENTIONAL REFRIGERATION METHODS: Principle and operation of
thermoelectric refrigerator and Vortex tube or Hirsch tube.
(3)
UNIT IV
INTRODUCTION TO AIR CONDITIONING:Psychrometric properties and processes,
sensible and latent heat loads, need for ventilation, infiltration, concepts of RSHF, ASHF, ESHF
& ADP, concept of human comfort and effective temperature, comfort air conditioning,
industrial air conditioning requirements, air conditioning load calculations.
(9)
AIR CONDITIONING SYSTEMS: Classification of equipment, cooling, heating,
humidification and dehumidification, filters, grills and registers, deodorants, fans and blowers,
heat pump, heat sources, different heat pump circuits, application.
(6)
TEXT BOOKS:
1. Refrigeration and air conditioning - C.P.Arora, TMH.
2. Refrigeration and Air conditioning - Manohar Prasad, New Age India, New Delhi.
3. A course in refrigeration and air conditioning - S.C.Arora&Domkundwar, Dhanpat Rai&
sons, New Delhi.
REFERENCE BOOKS:
1. Principles of Refrigeration - Dossat.
2. Refrigeration and air conditioning - Stoecker.
NOTE: Refrigeration and Air conditioning Data book by Manohar Prasad is allowed in the
exam
OPEN ELECTIVE
AUTOMATION TECHNOLOGY
14OE706/BR 01
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT-I
FUNDAMENTAL PRINCIPLES
Industrial prime movers - A brief system comparison: An electrical system, A hydraulic system,
A pneumatic system, A comparison - Definition of terms: Mass and force, Pressure, Work,
energy and power, Torque - Pascals law - Gas laws.
HYDRAULIC PUMPS AND PRESSURE REGULATION
Pressure regulation - Pump types: Gear pumps, Vane pumps - Loading valves - Filters.
AIR COMPRESSORS, AIR TREATMENT AND PRESSURE REGULATION
Piston compressors - Air receivers and compressor control - Stages of air treatment - Pressure
regulation: Relief valves, Non-relieving pressure regulators and Relieving pressure regulators Service units.
UNIT -II
CONTROL VALVES
Graphic symbols - Types of control valve: Poppet valves, Spool valves, Rotary valves - Pilotoperated valves - Check valves: Pilot-operated check valves, Restriction check valves - Shuttle
and fast exhaust valves - Sequence valves - Time delay valves
ACTUATORS
Linear actuators - Mounting arrangements and Cylinder dynamics - Seals - Rotary actuators:
Constructional details - Applications: Speed control, Actuator synchronization, Regeneration,
Counter balance and dynamic braking, Pilot-operated check valves, Pre-fill and compression
relief.
UNIT-III
SENSORS
Sensors and Transducers - Performance Terminology Sensors: Displacement, Position, and
Proximity - Velocity and Motion - Force - Fluid Pressure - Liquid Flow - Liquid level Temperature - Light Sensors - Selection of Sensors - Inputting data by switches.
UNIT-IV
PROGRAMMABLE LOGIC CONTROLLER
Programmable - Basic PLC structure - Input / Output Processing - Ladder Programming Instruction lists - Latching and internal relays - Sequencing - Timers and Counters - Shift
registers - Master and Jump Controls - Data Handling - Analog input / output.
MECHATRONIC SYSTEMS: Mechatronic designs, Case studies: Timed switch, A pick-andplace robot and Car park barriers.
Text Books:
1. Andrew Parr, Hydraulics and Pneumatics - A Technicians and Engineers Guide, Jaico
Publishing House, 2005
2. W. Bolton, Mechatronics, Fourth Edition, Pearson Education, 2010
Reference Books:
1. Anthony Esposito, Fluid Power with Applications, Fifth Edition, Pearson Education,
2005
2. W. Bolton, Pneumatic and Hydraulic Systems, Butterworth Heinemann, 1997
3. Ernest. O. Doebelin, Measurement Systems - Applications and Design, Fifth Edition,
TMH
4. Gary Dunning, Introduction to Programmable Logic Controllers, 3rd Edition, 2007
BUSINESS COMMUNICATION & PRESENTATION SKILLS LAB

14ELL701
Practicals
Final Exam
: 2 Periods/Week
: 3 hours
Final Exam Marks
: 20
: 30
Unit-I
Identity Management Communication: Face to Face Impression Management & Mediated
Communication (Self Introduction & Self Promoting Over Stating And Under Stating
Strategies to Overcome Communicative Inhibitions Creating Positive Self image through
words - Appearance- Verbal and Non Verbal Manners) Giving Polite Yet Assertive Responses
Responsive strategies to handle criticism - Accepting Failure and Declaring Success.
Unit-II
Business Presentations: Oral and Power Point Presentations; Preparing Successful
Presentations; Assessing Audience, Making Effective Use of Visual Aids, Delivering
Presentation, Using Prompts, Handling With Questions and Interruptions, Mock Presentations.
Unit-III
Oratory Skills: Group Discussion, Extempore, Mock Parliament and Mock Press.
Unit-IV
Interview Management: Resume Preparation, Types of Interviews, Preparing For Interviews,
Facing Interviews, Handling Tough & Tricky Questions, Reviewing Performance, Participating
In Mock Interviews
COMPUTER AIDED ENGINEERING LAB

14MEL702
Practicals
Final Exam
: 3 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
The following analysis can be performed by using any of the analysis softwares like
ANSYS,
ALGOR, NASTRAN, NISA, ABAQUS etc.,
1. STATIC ANALYSIS: TRUSS AND FRAME STRUCTURES
2-D truss
3-D truss
Beam analysis
2. STATIC ANALYSIS: TWO DIMENSIONAL PROBLEMS
2-D structure with various loadings
2-D structures with different materials
Plate with hole
3. DYNAMIC ANALYSIS: MODAL AND TRANSIENT ANALYSIS
Modal analysis
Transient Response (spring-mass system)
4 NON-STRUCTURAL PROBLEMS
Steady State heat transfer
Transient heat transfer
REFERENCES:
1. Introduction to Finite elements in Engineering by Chandrupatla & Belegundu, PHI.
2. www.mece.ualberta.ca.
DESIGN & METROLOGY LABORATORY

14MEL703
Practicals
Final Exam
: 3 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
List of Experiments
1. Angle measurement by Bevel Protractor.

2. Angle and taper measurement by sine bar.
3. Measuring effective dia. of thread using 3 - wire method.
4. Measuring gear tooth thickness using gear tooth vernier.
5. Measuring internal diameter using bore dial gauge.
6. Measuring external diameters using Micrometer & Plotting
& R Charts
7. Measuring different parameters of a thread / gear tooth using profile projector

8. Measuring different parameters of a thread / gear tooth using Tool Makers Microscope.
9. Measurement of external diameter and thickness using Dial caliper.
TERM PAPER
14MEL704
Lectures
Final Exam
: 2 Periods/Week
: 3 hours
Final Exam Marks
: 20
: 30
Internal marks for the term paper will be awarded based on a minimum of two
SEMINARS/ PRESENTATIONS and the report submitted at the end of semester
AUTOMATION TECHNOLOGY
14ME801
IVYear B.Tech. (Mech) Eighth Semester
Lectures
Final Exam
: 4 Periods/Week, Tutorial 1
: 3 hours
Final Exam Marks
: 40
: 60
UNIT-I
FUNDAMENTAL PRINCIPLES
Industrial prime movers - A brief system comparison: An electrical system, A hydraulic system,
A pneumatic system, A comparison - Definition of terms: Mass and force, Pressure, Work,
energy and power, Torque - Pascals law - Gas laws.
HYDRAULIC PUMPS AND PRESSURE REGULATION
Pressure regulation - Pump types: Gear pumps, Vane pumps - Loading valves - Filters.
AIR COMPRESSORS, AIR TREATMENT AND PRESSURE REGULATION
Piston compressors - Air receivers and compressor control - Stages of air treatment - Pressure
regulation: Relief valves, Non-relieving pressure regulators and Relieving pressure regulators Service units.
UNIT -II
CONTROL VALVES
Graphic symbols - Types of control valve: Poppet valves, Spool valves, Rotary valves - Pilotoperated valves - Check valves: Pilot-operated check valves, Restriction check valves - Shuttle
and fast exhaust valves - Sequence valves - Time delay valves
ACTUATORS
Linear actuators - Mounting arrangements and Cylinder dynamics - Seals - Rotary actuators:
Constructional details - Applications: Speed control, Actuator synchronization, Regeneration,
Counter balance and dynamic braking, Pilot-operated check valves, Pre-fill and compression
relief.
UNIT-III
SENSORS
Sensors and Transducers - Performance Terminology Sensors: Displacement, Position, and
Proximity - Velocity and Motion - Force - Fluid Pressure - Liquid Flow - Liquid level Temperature - Light Sensors - Selection of Sensors - Inputting data by switches.
UNIT-IV
PROGRAMMABLE LOGIC CONTROLLER
Programmable - Basic PLC structure - Input / Output Processing - Ladder Programming Instruction lists - Latching and internal relays - Sequencing - Timers and Counters - Shift
registers - Master and Jump Controls - Data Handling - Analog input / output.
MECHATRONIC SYSTEMS: Mechatronic designs, Case studies: Timed switch, A pick-andplace robot and Car park barriers.
Text Books:
1. Andrew Parr, Hydraulics and Pneumatics - A Technicians and Engineers Guide, Jaico
Publishing House, 2005
2. W. Bolton, Mechatronics, Fourth Edition, Pearson Education, 2010
Reference Books:
1. Anthony Esposito, Fluid Power with Applications, Fifth Edition, Pearson Education,
2005
2. W. Bolton, Pneumatic and Hydraulic Systems, Butterworth Heinemann, 1997
3. Ernest. O. Doebelin, Measurement Systems - Applications and Design, Fifth Edition,
TMH
4. Gary Dunning, Introduction to Programmable Logic Controllers, 3rd Edition, 2007
Lectures
Final Exam
:
:
AUTOMOBILE ENGINEERING
14ME802
4 Periods/Week Self study:1
3 hours
Final Exam Marks
: 40
: 60
UNIT I
INTRODUCTION: Classification of vehicles applications, options of prime movers,
transmission and arrangements.
(4)
ENGINE: Engine Classifications - number of strokes, cylinders, types of combustion chambers
for petrol and diesel engines, valves, valve arrangements and operating Mechanisms, Piston design basis, types, piston rings, firing order; Crankshafts, Flywheel.
(7)
ASSORTED EQUIPMENT: Fuel supply pumps, Mechanical and Electrical type Diaphragm
pumps, Air and Fuel Filters, super chargers, Mufflers.
(4)
UNIT II
COOLING SYSTEMS: Need for cooling system, Air and water cooling.
(3)
LUBRICATING SYSTEMS: Various lubricating systems for I.C. Engines.
(3)
ELECTRICAL SYSTEM: Ignition system, Spark plugs, Distributor, Electronic Ignition,

Alternator, cutout, Current and voltage regulators, charging circuit, starting motors, lighting,
instruments and accessories.
(9)
UNIT III
CHASSIS & TRANSMISSION SYSTEMS: Introduction to Chassis & Transmission, Clutches
Single-plate and Multi-plate clutches, Centrifugal clutches, wet and dry type, actuating
mechanisms.
(7)
TRANSMISSION: Gear Box - Theory, Four speed and Five Speed Sliding Mesh, Constant
mesh & synchromesh type, selector mechanism, automatic transmission, overdrive, propeller
shaft, differential - principle of working.
(8)
UNIT IV
SUSPENSION SYSTEMS: Need for suspension systems, springs, shock absorbers, axles
front and rear, different methods of floating rear axle, front axle and wheel alignment.
(8)
VEHICLE CONTROL: steering mechanisms and power steering, types of brakes and brake
actuation mechanisms (air and hydraulic).
(7)
TEXT BOOKS:
1. Automobile Engineering - G.B.S.Narang.
2. Automobile Engineering - R.B.Gupta
3. Automobile Engineering - Vol I & II - Kirpal Singh
REFERENCE BOOKS:
1. Automotive Mechanics - Joseph Heitner
2. Automobile Engineering - S.Srinivasan
POWER PLANT ENGINEERING

14ME803/A
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
INTRODUCTION: Various Energy sources, types of power plants.
(1)
HYDRO ELECTRIC POWER PLANT: Hydrology, Rainfall, Run off and their measurement,
hydrograph, Flow duration curve, Mass curve and calculation of storage capacity, site selection
of hydro plant, different types of hydro plants.
(9)
DIESEL AND GAS TURBINE POWER PLANTS: Classification, main components of plant,
plant layout, application and comparison with other plants.
(5)
UNIT II
THERMAL POWER PLANT: General layout, Fuels, Coal analysis, Coal handling, burning of
coal - stoker and pulverized systems, Ash handling systems, ESP, Need for Draught, Highpressure boilers, Condensers, cooling ponds and towers (wet and dry types), Deaeration. (15)
UNIT III
NUCLEAR POWER PLANTS: Nuclear Fission, Nuclear Fuels, Components of Reactor, types
of Nuclear Reactors, Breeding, Fast Breeder Reactor, Radiation shields, nuclear waste disposal.
(7)
FLUCTUATING LOADS ON POWER PLANTS: Various performance Factors (load factor,
diversity factor, use factor etc.).
(3)
POWER PLANT ECONOMICS: Fixed costs, operating costs, cost per kWh, comparison of
fixed and operating costs of hydro, thermal, nuclear plants, power tariffs.
(3)
POLLUTION AND CONTROL: Introduction, particulate and gaseous pollutants, thermal
pollution and solid waste pollution, methods to control pollution - brief description.
(2)
UNIT IV
SOLAR ENERGY: Solar collectors, solar energy storage, solar ponds, solar energy utilization
and applications.
(4)
WIND POWER: Basic principle, different types of wind mills, wind energy conversion
systems, other applications.
(3)
GEOTHERMAL POWER: sources, energy conversion system.
(2)
OTEC: ocean thermal energy conversion systems, introduction to tidal power.
(3)
DIRECT ENERGY CONVERSION SYSTEMS: Fuel cells, MHD, Solar cell.
(3)
TEXT BOOKS:
1. Power Plant Engineering - G.R. Nagpal, Khanna publ, New Delhi
2. Power Plant Engineering P.K.Nag, TMH
3. Non Conventional Energy Sources - G.D. Rai, Khanna publ, New Delhi.
REFERENCE BOOKS:
1. Power Plant Technology - M.M. El Wakil, MGH, New York.
2. Principles of Energy Conversion - A.W.Culp, MGH, New York.
14ME803/B
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT - I
INTRODUCTION
General Characteristics of mechanical elements, adequate and optimum design, principles of
optimization, formulation of objective function, design constraints -Classification of
optimization problems.
(15)
UNIT - II
Single variable and multivariable optimization, Techniques of unconstrained minimization Golden Section - Random , pattern and gradient search methods -Interpolation methods. (15)
UNIT - III
OPTIMIZATION WITH EQUALITY AND INEQUALITY CONSTRAINTS: Direct
methods - Indirect methods using penalty functions Lagrange multipliers; Geometric
programming and stochastic programming; Multi objective optimization.
(15)
UNIT - IV
ENGINEERING APPLICATIONS
Structural applications - Design of simple truss members. Design application - design of simple
axial, transverse loaded members for minimum cost, maximum weight, - Design of shafts and
torsionally loaded members - Design of springs, Dynamic Applications - Optimum design of
single, two degree freedom system, vibration absorbers. Application in Mechanism - Optimum
design of simple linkage mechanism.
(15)
TEXT BOOKS:
1.Singeresu S. Rao, "Engineering Optimization - Theory and Practice" New Age Intl.
Ltd.Publishers, 2000
REFERENCES:
1.Johnson Ray, C., "Optimum design of mechanical elements", John Wiley & Sons, 1981
2.Goldberg, D.E., "Genetic algorithms in search, optimization and machine learning",
Addison-Wesley, NewYork, 1989
3.Kalyanamoy Deb, "Optimization for Engineering design algorithms and Examples", Prentice
Hall of India, 1995
COMPUTER INTEGRATED MANUFACTURING

14ME803/C
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
INTRODUCTION:; Scope of computer integrated manufacturing, Product cycle, Production
automation.
GROUP TECHNOLOGY : Role of group technology in CAD/CAM ,Integration, methods for
developing part families, classification and codling, Examples of coding systems, Facility design
using group technology.
UNIT II
COMPUTER AIDED PROCESS PLANNING: Approaches to process planning Manual,
variant ,Generative approach, Process planning systems CAPP , DCLASS ,CMPP, Criteria for
selecting a CAPP system, Part feature recognition.
UNIT III
INTEGRATIVE MANUFACTURING PLANNING AND CONTROL : Role of integrative
manufacturing in CAD/CAM integration, over view of production control Forecasting, Master
production schedule, rough cut capacity planning, M.R.P., order release, shop floor control,
Quality assurance, Planning and control systems, Cellular manufacturing.
UNIT IV
COMPUTER AIDED QUALITY CONTROL: Terminology in quality control, contact
inspection methods, Non Contact inspection methods, computer Aided Testing, Integration of
CAQC with CAD/CAM .
COMPUTER INTEGRATED MANUFACTURING SYSTEMS: Type of manufacturing
systems, Machine tools and related equipment, Material handling systems, Computer control
systems, FMS.
TEXT BOOKS:
1. Mikel P.Graoover, Emery W. Zimmer ,CAD/CAM PHI Ltd.,
2. David D.Bed.worth , Mark R.Henderson, Philip M. Woife, Computer aided design and
Manufacturing ,McGraw Hill Publishers.
Lectures
Final Exam
COMPUTER AIDED DESIGN

14ME803/D
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT - I
INTRODUCTION: Fundamentals of CAD, Design process, Applications of computer for
design, Benefits of CAD, Computer peripherals for CAD work station, Graphic terminal, CAD
software, CAD database and structure.
(8)
DISPLAY DEVICES: Video display devices Raster scan display, CRT , DVST, Inherent
memory display devices, Random Scan Display, Input devices.
(7)
UNIT- II
PRIMITIVES: Points and Lines, Line drawing algorithms, DDA algorithm, Bresenhams line
algorithm, Circle generation algorithm, Mid point circle algorithm.
(7)
GEOMETRIC MODELING: 2D wire frame modeling, 3D Wire frame modeling, Wire frame
models , Entities and their definitions. Concept of Parametric and nonparametric representation
of curve, Curve fitting techniques, Definitions of cubic splines.
(8)
UNIT - III
SURFACE MODELING: Surface modeling and entities, Parametric space of Surface, Blending
functions, Surface of revolution,.
(7)
SOLID MODELING: Solid models, Solid entities, Solid representation, Sweep representation,
Constructive solid geometry and Boundary representation, Solid modeling based applications.
(8)
UNIT- IV
GEOMETRIC TRANSFORMATIONS: Transformation Principles, Translation,Scaling,
Rotation, Matrix Representations and Homogeneous Coordinates, Composite transformations .
(15)
TEXT BOOKS:
1.CAD/CAM by Mikel P.Groover and Emory W.Zimmers,Prentice Hall of India , Delhi
2.CAD/CAM by P.N.Rao, Tata McGrawhill , Delhi
3.CAD/CAM by Ibrahim Zeid, Tata McGrawhill,Delhi.
4.Principles of Interactive Computer Graphics by Newman and Sproull, McGrawhill
Lectures
Final Exam
ROBOTICS
14ME804/A
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
Introduction to Robotics, major components of a robot, robotic like devices, classification of
robots Classification by coordinate system and by control method, Specifications of robots,
fixed versus flexible automation, economic analysis, overview of robot application.
15
UNIT II
Robot end Effectors : Introduction, end effectors, interfacing, types of end effectors, grippers and
tools, considerations in the selection and design of remote centered devices.
15
UNIT III
Robotic sensory devices : Objective, Non-optical position sensors potentiometers, synchros,
inductocyn, optical position sensors optic interrupters, optical encoders (absolute &
incremental)
Proximity sensors : Contact type , non contact type reflected light scanning laser sensors.
Touch & slip sensors : Touch sensors proximity rod & photo detector sensors, slip sensors
Forced oscillation slip sensor, interrupted type slip sensors, force and torque sensors.
15
UNIT IV
Transformations and Kinematics : Objectives, homogenous coordinates, basic transformation
operations, forward solution Denavit Hartenberg procedure. Simple problems involving planar
manipulators, inverse or backward solution problems involved, techniques.
Introduction to Trajectory Planning, the manipulator jacobian.
TEXT BOOKS :
1.Robotic Engineering by Richard D.Klafter
2.Industrial Robotics by Mikell P.Groover
REFERENCE BOOKS :
1.Introduction to Robotics John J.Craig
2.Robotics K.S.Fu, Gonzalez & Lee
3.Robotics for Enginers by Yoram Koren.
4. Robotics Technology and Flexible Automation by S.R.Deb
5. Robotics by Saeed.B.Niku
15
COMPUTER AIDED PROCESS PLANNING

14ME804/B
Lectures
Final Exam
: 4 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
UNIT I
INTRODUCTION
The Place of Process Planning in the Manufacturing cycle-Process planning and production
Planning-Process planning and Concurrent Engineering, CAPP, Group Technology
15
UNIT II
PART DESIGN REPRESENTATION
Design Drafting-Dimensioning-Conventional Tolerance- Geometric Tolerance-CADinput/output devices-Topology- Geometric transformation-Perspective transformation-Data
Structure-Geometric modeling for process planning--GT Coding-The OPITZ system-The
MICLASS System
15
UNIT III
PROCESS ENGINEERING AND PROCESS PLANNING
Experience based planning-Decision table and Decision trees-Process capability analysis-Process
planning-Variant process planning-Generative approach-Forward and backward planning, Input
format, AI
15
UNIT IV
COMPUTER AIDED PROCESS PLANNING SYSTEMS
Logical Design of process planning-Implementation considerations-Manufacturing system
components, Production Volume, No. of production families - CAM-I, CAPP, MIPLAN,
APPAS, AUTOPLAN and PRO, CPPP
15
References:
1. Gideon Halevi and Roland D. Weill, "Principle of process planning- A Logical
Approach, Chapman & Hall, 1995
2. Chang T. C. & Richard A.Wysk, "An Introduction to automated process planning
systems", PrenticeHall1985
3. Chang,T.C., "An Expert Process Planning System", Prentice Hall,1985
4. Nanua Singh, "Systems Approach to Computer Intergrated Design and Manufacturing",
John Wiley &Sons,1996
5. Rao P.N., "Computer Aided Manufacturing", Tata McGraw Hill Publishing Co., 2000.
Web References:
1. http://claymore.engineer.gusu.edu/jackh/eod/automate/capp/capp.htm
2. http://Estraj.ute.sk/journal/engl-027/027.htm
ENTERPRISE RESOURSE PLANNING

14ME804/C
: 4 Periods/Week
: 3 hours
Final Exam Marks
Lectures
: 40
Final Exam
: 60
UNIT I
MANUFACTURING INDUSTRY: Management characteristics and Information
Requirements. Industry classification, Product , Market, Process characteristics, Manufacturing
Planning, and control, Technoiques ERP ,Concept & Evaluation History: MRP -1 , MRP 2,
Advancement, Client survivor Technology, RDBMS.
SALES PURCHASE, INVENTRORY CONTROL, CONCEPTS: Classifications, coding of
Material , Finished goods, sales, Enquires, Quotation, Order , Invoices, Delivery, Finished good
valuation, Purchase requisition, Enquiry, Supplier, Quotation, Purchase order, Material Receipts,
Material issues, Methods of issue, valuation (FIFO/LIFO, Weighted Average cost/ std.Cost).
Returns, From operations, Returns to supplier, Stock Adjustments, Physical stock verification,
ABC Analysis, Lot and Locations, Controls, Replenishment order control (Safety, stocks, Report
paint, Economic order quantity). (15)
UNIT II
MANUFACTURING: product configuration, Bill of material, Master production Scheduling,
Material. Requirement Planning, Capacity, Requirement Planning, Loading and Scheduling. An
over view of man power planning and customer manufacturing planning.
FINANCIAL AND COST ACCOUNTING:
Basic accounting principles, Daybook, cash, journal, purchase and sales, Ledgers, - general,
supplier , customer, Advances. etc., Bank Reconciliation, Trial Balance, Profit, & Loss, Income
& Expenditure. Account and Balance sheet. Fixed assets and depreciation Budgeting Revenue,
Capital cash, Cost. Elements Direct materials, Direct Labour, Direct expenses, and over heads.
Margin of Cost and Break even analysis standard costing.Activity based costing.
(15)
UNIT III
INTRODUCTION TO A TYPICAL ERP SOFTWARE : Overview of ERP modules and
tools of a software like BaaN.
DISTRIBUTION MODULE:
Module architecture, an over view, Item data, Purchase
orderings/ Control, sales, Ordering, Control, Replenishment order Control, Electronic Data
Interchange.
(15)
UNIT IV
MANUFACTURING MODULE: Module architecture an overview, capacity Requirement
Planning. Engineering Change Control, Engineering data management, Master Production.
Scheduling, Masterials Requirement planning, Product classification / Configuration , Production
Planning and Control, Repetitive Manufacturing,.
FINANCE MODULE: Module architecture an overview, accounts payable, Accounts
receivable, General Ledger, cost allocation, cash management, Activity based costing, Fixed
assets, Financial, Budgeting system.
(15)
TEXT BOOKS:
Joseph or Ticks, Materials Requirement Planning the New Way in Production, and Inventory
Management (McGraw Hill Books company New Delhi1975.,
Reference Book:
BaaN Student Manuals BaaN Education Books.Hyderabad..1990.
PRODUCTION PLANNING AND CONTROL

14ME804/D
: 4 Periods/Week
: 3 hours
Final Exam Marks
Lectures
: 40
Final Exam
: 60
UNIT I
Introduction: Definition Objectives of production Planning and Control Functions of
production planning and control Elements of production control Types of production
Organization of production planning and control department Internal organization of
department.
Forecasting Importance of forecasting Types of forecasting, their uses General principles of
forecasting Forecasting techniques qualitative methods and quantitive methods.
UNIT II
Inventory management Functions of inventories relevant inventory costs ABC analysis
VED analysis EOQ model Inventory control systems PSystems and Q-Systems
Introduction to MRP & ERP, LOB (Line of Balance), JIT inventory, and Japanese concepts.
UNIT III
Routing Definition Routing procedure Route sheets Bill of material Factors affecting
routing procedure. Schedule definition Difference with loading
Scheduling Policies Techniques, Standard scheduling methods.
UNIT IV
Line Balancing, Aggregate planning, Chase planning, Expediting, controlling aspects.
Dispatching Activities of dispatcher Dispatching procedure folowup definition Reason
for existence of functions types of followup, applications of computer in production planning
and control.
TEXT BOOKS:
1. Elements of Production Planning and Control / Samuel Eilon.
2. Modern Production/ operation managements / Baffa & Rakesh Sarin
REFERENCES:
1. Operations Management S.N. Chary.
2. Inventory Control Theory and Practice / Martin K. Starr and David W. Miller.
3. Reliability Engineering & Quality Engineering by Dr. C. Nadha Muni Reddy and
Dr. K. Vijaya Kumar Reddy, Galgotia Publications, Pvt., Limited.
4. Production Control A Quantitative Approach / John E. Biegel.
5. Production Control / Moore.
6. Operations Management / Joseph Monks.
PROJECT WORK
14MEPR801
Practicals
Final Exam
: 12 Periods/Week
: 3 hours
Final Exam Marks
: 50
: 100
The Project Report has to be submitted at the end of the semester and marks will be
awarded based on the Viva-voce examination
AUTOMATION LAB
14MEPR802
Practicals
Final Exam
: 3 Periods/Week
: 3 hours
Final Exam Marks
: 40
: 60
I. Manual Part Programming and tool path simulation on CNC Lathe for the following
operations.
1) Step turning,
2) Taper turning,
3) Profile turning
4) External threading
5) Drilling, boring and internal threading
II. Manual Part Programming and tool path simulation on CNC Machining centre for the
following operations.
1) Slot milling.
2) Step milling
3) Diagonal milling.
4) Profile milling.
5) Hexagon milling & drilling.
III. Modeling, Part Program generation and tool path simulation using Master CAM software.
IV. Programming examples on PLC.

Mechanical Syllabus

Uploaded by

Copyright:

Available Formats

Mechanical Syllabus

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mechanical Syllabus

Uploaded by

Copyright:

Available Formats

BAPATLA ENGINEERING COLLEGE

SCHEME OF INSTRUCTIONS & EXAMINATION

DEPARTMENT OF MECHANICAL ENGINEERING

Academic Rules & Regulations for B. Tech Programme

4.0 MINIMUM No. INSTRUCTION DAYS:

Each Programme of a Discipline or a branch of study shall consist of:

Professional Elective and Open Elective Courses

Major Project / Seminar, etc

Contact hours: Depending on the complexity and volume of the course,

Credits: Credits are assigned to each course as per norms mentioned in

Theory Course (4 Periods/Week)

Theory Course with additional Tutorial Period

Laboratory Course (3 Periods/Week)

Transitory Regulations: For students admitted under advance standing (mentioned in

Equivalent courses completed by the student are established by the BOS

6.3 Continuous Internal Evaluation (CIE) in Theory and Drawing subjects:

25% of marks obtained 50% of marks obtained

A minimum of 40 marks are to be secured exclusively in the Semester End

6.5 Continuous Internal Evaluation (CIE) in laboratory courses:

In any semester, a minimum of 90 percent of prescribed number of experiments /

A minimum of 50 marks shall be obtained in SEE which shall be reduced to 30 marks

A minimum of 25 marks shall be obtained in SEE which is reduced to 15 (50 %) and

6.8 Evaluation of Project:

90% and above

Less than 40%

Where C i = number of credits for the course i,

Transcripts: After successful completion of the total Programme of study, a

Candidates shall be permitted to apply for recounting/revaluation of SEE scripts

15.0 IMPROVEMENT OF CLASS:

BAPATLA ENGINEERING COLLEGE : BAPATLA

14CHL101 Chemistry Lab

CIE: Continuous Internal Evaluation

SEE: Semester End Examination

BAPATLA ENGINEERING COLLEGE : BAPATLA

14HWL202 Hardware Lab

CIE: Continuous Internal Evaluation

SEE: Semester End Examination

BAPATLA ENGINEERING COLLEGE : BAPATLA

Fuels & Oils Lab

Basic CAD Lab

CIE: Continuous Internal Evaluation

SEE: Semester End Examination

BAPATLA ENGINEERING COLLEGE : BAPATLA

Casting, Forming and

SEE: Semester End Examination

BAPATLA ENGINEERING COLLEGE : BAPATLA

14MEL502 Machine shop

CIE: Continuous Internal Evaluation

SEE: Semester End Examination

BAPATLA ENGINEERING COLLEGE : BAPATLA

Cad modeling lab

CIE: Continuous Internal Evaluation

SEE: Semester End Examination

BAPATLA ENGINEERING COLLEGE : BAPATLA

With Effective From 2014-2015 Academic Year

Design and Metrology

SEE: Semester End Examination

BAPATLA ENGINEERING COLLEGE : BAPATLA

CIE: Continuous Internal Evaluation