Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Free Energy Generator Plans

Download as pdf or txt
Download as pdf or txt
You are on page 1of 7
At a glance
Powered by AI
The key takeaways are that the electric loop free energy generator uses a coil of wire to create a circulating electric current that can power loads without external energy input once started. It has no moving parts.

The electric loop free energy generator works by using a coil of multi-conductor wire to create an endless circulating electric current once an initial spark of energy is provided. This circulating current is then able to power loads without draining the energy from the circuit, creating an overunity state.

To start the electric loop free energy generator, a source of high voltage is needed, such as a piezo igniter from an electric lighter, which uses a high voltage spark to induce an electromagnetic pulse into the wires and start the circulating current.

9/13/13

Free Energy Generator Plans

Free Energy Generator Plans


KINO: contact angle meter
www.uskino.com
Expert of measuring contact angle Global Sourcing & Acceptable Price

Electric loop free energy generator


The electric loop free energy generator is one of the most simple free energy generator
topologies. It works on a principle of an endless electric loop. Once the initial energy is
applied, the electric power keeps circulating in the ring. The circulation also starts the
process of harnesing the ubiquitous abundant energy, thus turning the device into an
overunity. Overutiny state allows adding a load without draining the energy from the circle.
This turns the ordinary energy circle into a free energy generator and generates some
amount of the free electricity. Big advantage of this version of free energy generator is
that it has no moving parts. It simple uses the circular coil made of a multi-conductor wire.
The electricity is the only thing moving in the generator. The disadvantage is that the free
energy device of this kind can't be simply started by spinning its rotor, unlike the rotation
free energy generators. The source of an initial electric energy is necessary. The Electric
loop free energy generator topology is suitable for building the low to medium power
overunity device.
The practical model of this generator is easy to build using the ordinary power extension
plug. In most cases, the cable length of at least 3 meters (10 feet) is enough to form its
operating coil. I recommned the coil diameter to be at least 10cm (4 inch) and the turn
count at least 8 turns. The complete circle is formed by putting the end of the cable into
one of the sockets. The free energy device is ignited by using a source of initial electricity.
The voltage has to be high enough to start the circulation at the overunity level. The best
ignitor seems to be simply the piezo from the electric lighter. It allows the ignition witn ho
battery (that can run empty), just by pressing the button of the piezo element. This element
generates high voltage sparks of several kilovolts, but with a very short duration and very
low current. The output wire shoud be put very close to a metal part of the extension cord.
free-energi.com/index.php?a=1

1/7

9/13/13

Free Energy Generator Plans

Best way is to use metal parts accessible from outside, eg. the ground contact. The
electromagnetic pulse is then induced into the other wires of the extension socket, eg. the
line and neutral. Before doing anything, read the Disclaimer first.

Menu:
Home
Electric loop free
energy generator
free-energi.com/index.php?a=1

The ilustration how the power extension cord can look like. It has several sockets. Note
2/7

9/13/13

Free Energy Generator Plans

Magnet motor free


energy generator

the maximum power rating denoted on it. This power should never be exceeded.
However, in some cases, the generated power limit of the free energy generator can be
lower due to the coil dimensions.

Electrostatic self
running motor
LED - Photovoltaic
loop generator
Air / Gas loop free
energy generator
Disclaimer

Beside the power extension plug, another necessary part of the free energy generator is
free-energi.com/index.php?a=1

3/7

9/13/13

Free Energy Generator Plans

the lighter. The image shows the comparison of the good and wrong lighters. The blue
one is the good one - the piezo can be salvaged from it. The orange one is the bad one it is the mechanical lighter, not electrical, and contains no piezo. So remember, not every
lighter is suitable as a source of an initial energy!

free-energi.com/index.php?a=1

4/7

9/13/13

Free Energy Generator Plans

Those photos illustrate the overunity generator before and after the ignition. I strongly
recommend you to use the power strip with the indicator light in its switch. The light helps
you determine Whether the generator is in active mode or in idle mode. Also remember
to turn on the switch before ignition. The ignition can take up to several cycles of the piezo
pulse.

free-energi.com/index.php?a=1

5/7

9/13/13

Free Energy Generator Plans

Those two pictures are showing the detail of the piezo and the free energy being started
in dark. You can see the visible high voltage electric spark. Also note that the piezo, unlike
the non-overutiny elements, has only a single wire and no return wire.

Last pair of the photos shows the electric loop free energy generator in loaded state. It
free-energi.com/index.php?a=1

6/7

9/13/13

Free Energy Generator Plans

can be loaded even with a 2 kW heating unit!

MF-Generatoren 0.1-50 kW
www.tigres.de
fr Korona-, AD- und ND-Plasma fr OEM und Einzelanwendungen.

Like

free-energi.com/index.php?a=1

301

7/7

You might also like