STG16-01 Actuator PDF
STG16-01 Actuator PDF
Robust Design
Easy Mounting
Engine Mounted
All Electric
Available
No Mechanical Drive
Extended Warranty
Available
Ex Stock
DESCRIPTION:
The STG16 actuator range is used extensively in diesel and gas engine power generation and marine propulsion
engine applications.
The Actuator replaces most Hydraulic actuators such as the Woodward UG8 range. The base of the actuator can
have an optional fitting that will allow the output shaft to be in an identical position to that of the Woodward unit.
This is called the UG8 Base Adaptor Plate.
Fitting of the actuator can be in any position or attitude relative to the engine fuel linkage and has the advantage of
being able to be mounted away from engine vibration high spots such as the conventional mechanical drive gear
train and shaft.
Another major advantage is that the actuator drives in both directions at full rated torque and has a closed loop positional drive allowing high torque to overcome linkage friction over the range 0100%..
The high torque comes with the advantage of low actuating running current. On Perkins 4012 and 4016 diesel
engines, the running current is normally no more than 2 amperes at steady state rated speed.
STG16SalesLiteratureAugust2013
STG16-01 ACTUATOR
GovernorTechnicalSolu
ons
EnterpriseHouseHarmireEnterpriseParkBarnardCastleCountyDurhamDL128XT
Tel:0044(0)1833696712Fax:0044(0)1833696713Email:sales@governorts.comwebsite:www.governorts.com
STG16SalesLiteratureAugust2013