Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 260 views

    LAB4

    Uploaded by

    Esteban Esguevillas García
    The LAB4 dehydrator provides continuous dry air flow up to 300 Nl/h with a dew point below -45°C. It uses two drying chambers that operate alternately to dry and regenerate desiccant. Output pressure can be programmed from 1 to 6 kPa. It has low power consumption and is suitable for wall, rack, or floor mounting. Alarms indicate issues like low pressure, high pressure, high humidity, or power failure.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    LAB4

    Uploaded by

    Esteban Esguevillas García
    260 views4 pages
    The LAB4 dehydrator provides continuous dry air flow up to 300 Nl/h with a dew point below -45°C. It uses two drying chambers that operate alternately to dry and regenerate desiccant. Output pressure can be programmed from 1 to 6 kPa. It has low power consumption and is suitable for wall, rack, or floor mounting. Alarms indicate issues like low pressure, high pressure, high humidity, or power failure.

    Original Description:

    Dehydrator manual

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The LAB4 dehydrator provides continuous dry air flow up to 300 Nl/h with a dew point below -45°C. It uses two drying chambers that operate alternately to dry and regenerate desiccant. Output pressure can be programmed from 1 to 6 kPa. It has low power consumption and is suitable for wall, rack, or floor mounting. Alarms indicate issues like low pressure, high pressure, high humidity, or power failure.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    260 views4 pages

    LAB4

    Uploaded by

    Esteban Esguevillas García
    The LAB4 dehydrator provides continuous dry air flow up to 300 Nl/h with a dew point below -45°C. It uses two drying chambers that operate alternately to dry and regenerate desiccant. Output pressure can be programmed from 1 to 6 kPa. It has low power consumption and is suitable for wall, rack, or floor mounting. Alarms indicate issues like low pressure, high pressure, high humidity, or power failure.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Pressurization LAB4

    L A B 4 D E H Y D R AT O R
    F O R W AV E G U I D E S A N D C O A X I A L C A B L E S

    key features

    output pressure programmable up to 6 kPa


    flow rate up to 300 Nl/h
    dew point better than -45 C
    two pumps and two drying chambers running alternatively
    continuous duty and automatic operation
    drying chambers automatic regeneration
    microprocessor control, LCD display, two buttons keypad
    low/high pressure, high humidity, power and system failures alarms
    local and remote alarm signaling
    optional Ethernet port for remote monitoring
    output pressure, hour meter, alarms readout
    very low power consumption
    low acoustic noise
    high reliability and long life
    mounting: wall , 19 and ETSI N3 racks
    description
    The following devices are available on the front
    The LAB4 dehydrator provides continuous dry air
    panel:
    flow up to 300 Nl/h with a dew point better than 2x16 LCD
    two function keys
    -45C. Output pressure can be set in the range from
    bi-color led (power on, alarms)
    1 kPa to 6 kPa. on/off outlet valves

    The LAB4 achieves reduced mechanical wear and The LAB4 provides front access keys to set the
    noise and therefore a long lifetime by output operating pressure at any time.
    pressure measurement, microprocessor control and
    Output pressure measurement and hour meter
    a pump speed regulation. Pumps speed control
    values are displayed on the LCD.
    avoids mechanical pressure regulators eliminating
    The basic version has low pressure, high pressure,
    undesirable pressure losses and a worse response
    high humidity, power and system failures alarms. All
    to plant air flow regulation.
    alarm messages are locally signaled by the display
    Two drying chambers contain the desiccant and dry and remotely signaled by one SPDT relay.
    airstream by adsorption process. The chambers As option are available:
    operate on alternate cycles so while the first 10/100 Mbit Ethernet interface for remote control,
    chamber dries, the second one regenerates the variable area flowmeter, glass tube type, placed
    on the front panel
    desiccant by heating and backwashing with a small electronic flowmeter with data showed on the
    reverse dry air flow. display
    pump-rate measure showed on the display
    The dehydrator also adjusts the switching interval
    Power supply and alarm remote connectors, outlets
    between the two drying chambers according to the
    with hose-tail fittings are available on the rear panel.
    amount of dry air supplied to the plant.
    The LAB4 always includes wall, 19 and ETSI N3
    This technology reduces overall power consumption.
    rack mountings.

    pneumatic scheme

    DRYING CHAMBER

    HEATER

    PUMP

    AIR BACKWASHING HOLE

    HUMIDITY PROBE

    DIGITAL PRESSURE GAUGE

    SAFETY VALVE

    SHUT OFF VALVE

    DRY AIR OUTLET

    FLOW METER (OPTIONAL)


    performance
    Output pressure : programmable from 1 to 6 kPa
    Maximum flow rate : 300 Nl/h
    Safety valve : built in, factory set at 7 kPa
    Output air dew point : better than -45C at 80% RH at 20C
    Regeneration : automatic by heating
    Regeneration phase interval : adaptive according to the amount of dry air supplied to the plant
    Local alarms : power and system failures, low/high pressure, high humidity
    Remote alarms : the summary alarm is remotely signaled by a SPDT relay
    Optional remote monitoring interface : 10/100 Mbit Ethernet, auto-sensing
    LED indications : power on, alarms
    Standard readouts : pressure, low/high pressure alarm thresholds, hour meter
    Optional measures : air flow by a variable area meter or by an electronic flowmeter,
    pump rate
    MTBF : higher than 165000 h, according to MIL HDBK 217F at Ground
    Base conditions, 25C ambient temperature, 50% flow rate
    Shock and vibration : transportation ETSI EN 300 019-1-2, Class 2.3
    stationary use ETSI EN 300 019-1-3, Class 3.1E
    Low Voltage Directive : 2006/95/EC
    Electromagnetic Compatibility Directive : 2004/108/EC
    Safety Normative : IEC/EN 60950-1
    certified to CB, test ref. n SE-64590A1
    Electromagnetic Compatibility Normative : EN 55022; EN 61000;
    ETSI EN 301 489-1; ANSI CFR 47 part 15
    Environmental compliance : 2011/65/EC (RoHS2)
    1907/2006 (REACH)
    Quality assurance standard : ISO 9001

    electrical specifications
    Power supply : 48/60 Vdc
    100 - 240 Vac, 50/60 Hz, with kit code K14524
    Power consumption operation : 2 W normal operation
    < 55 W regeneration phase

    mechanical and environmental characteristics


    Operating temperature C (F) : -10 to + 50 (+14 to +122)
    Storage temperature C (F) : -30 to + 70 (-22 to +158)
    Acoustic noise : 50 dBA
    Dimensions H, W, D, mm (in) : 19 rack mounting 132 (5.2), 482 (19), 238 (9.4)
    ETSI N3 rack mounting 132 (5.2), 533 (21), 238 (9.4)
    wall and floor mounting 132 (5.2), 482 (19), 278 (11)
    Weight kg (lb) : 6,5 (14.3)
    Standard outlets : 4 or 8 outlets, each with ON/OFF valve
    Outlets fitting mm (in) : 9,5 (3/8) diameter, others on request
    LAB4

    The equipment illustrated are fully equipped versions. CIBRED SUD reserves the right to modify without notice characteristics and data supplied herein.
    Via Catania 2 00041 Albano Laziale Loc. Pavona (RM) - Italy
    T el. +3 9 0 6 93 4 40 0 9 Fax + 3 9 0 69 3 44 0 35
    ww w.c i bre d .c om e - m ail : c i bre d @c i bre d .c om
    C14520-E.DS4 DEL 07.14

    You might also like