Professional Documents
Culture Documents
Utp 83 FN
Utp 83 FN
Classifications
EN ISO 1071 AWS A5.15
E C NiFe-11 E NiFe-Cl
Characteristics and field of use
UTP 83 FN is suitable for surfacing and joining of all commercial cast iron grades, such as lamellar
grey cast iron and nodular cast iron, malleable cast iron and for joining these materials to steel or
cast steel. This stick electrode is particularly used where a high deposition rate is needed.
UTP 83 FN has an excellent melting performance and the easily controllable transfer provides a
spatterfree deposit of perfect appearance. The weld deposit is easily machinable with cutting tools,
tough and crack-resistant.
Typical analysis in %
C Ni Fe
1,3 52,0 balance
Welding instruction
The casting skin and impurities have to be removed from the welding area. Weld with low amper-
age and short arc. For the purpose of stress relief in case of difficult weldings, peen the weld metal
and reduce the heat input by welding short beads.
Welding positions
All information provided is based upon careful investigation and intensive research. 03/2014 Rev. 0
However, we do not assume any liability for correctness and information is subject to change without notice. www.voestalpine.com/welding