Utp Dur 250
Utp Dur 250
Utp Dur 250
Application field
UTP DUR 250 is used for surfacing on parts, where a tough and easily machinable deposit is required, such
as rails, gear wheels, shafts and other parts on farming and building machineries.Also suitable as cushion and
filler layer on non-alloyed and low-alloyed steels and cast steels.
Hardness of the pure weld deposit approx. 270 HB
1 layer on steel with C = 0,5 % approx. 320 HB
Properties of the weld metal
UTP DUR 250 has a very good resistance against compression and rolling strain. The weld metal is ea-
sily machinable.
C Si Mn Cr Fe
0,15 1,1 1,2 0,8 balance
Welding instructions
Hold stick electrode as vertically as possible and with a short arc. Preheat heavy parts and higher-carbon
steel qualities to 150 - 300° C. Re-dry stick electrodes that have got damp for 2h/300° C.