Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 4 views

    Utp 2949 W

    Uploaded by

    rajbujji478sd

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Utp 2949 W

    Uploaded by

    rajbujji478sd
    4 views1 page

    Original Title

    UTP 2949 W

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    4 views1 page

    Utp 2949 W

    Uploaded by

    rajbujji478sd

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    UTP 2949 W

    basic coated special stick electrode with high carbon content

    Classifications
    EN ISO 14172 Material-No.
    E Z Ni 6702 (NiCr28Fe6W) 2.4879
    Characteristics and field of use

    UTP 2949 W is suitable for joining and surfacing high alloyed 28/48 CrNi high temperature cast
    materials of identical or similar nature, such as material-No. 2.4879 G-NiCr28W.

    UTP 2949 W has a smooth, stable arc. Easy slag removal. The seam has a finely rippled structure.

    Main applications are reformer tubes in petrochemical installations with a service temperature up
    to 1150 °C.

    Mechanical properties of the weld metal


    Yield strength Rp0,2 Tensile strength Rm Elongation A
    MPa MPa %
    480 650 5
    Typical analysis in %
    C Si Mn Cr Ni W Fe
    0.45 1.1 1.2 29.0 49.0 4.5 balance
    Welding instruction

    Clean welding area. Hold stick electrode as vertically as possible with a short arc. Use string bead
    welding technique with little weaving. This stick electrode is weldable with low amperage settings.
    Interpass temperature max. 150 °C.

    Re-dry stick electrodes 2 – 3 h / 250 – 300 °C.

    Welding positions

    Current type DC (+)

    Recommended welding parameters


    Electrodes Ø x L [mm] 2.5 x 300* 3.2 x 350* 4.0 x 350*
    Amperage [A] 50 – 70 70 – 120 100 – 140
    *
    available on request

    All information provided is based upon careful investigation and intensive research. 03/2019 Rev. 1 TA/dp
    However, we do not assume any liability for correctness and information is subject to change without notice. www.voestalpine.com/welding

    You might also like