Официальный дистрибьютор ЗАО «Ресурс» т/ф 8 (383) 363-26-24, 291-93-02 630020 Россия г.Новосибирс ул.Объединения д.9 e-mail: resurszao@
Официальный дистрибьютор ЗАО «Ресурс» т/ф 8 (383) 363-26-24, 291-93-02 630020 Россия г.Новосибирс ул.Объединения д.9 e-mail: resurszao@
Официальный дистрибьютор ЗАО «Ресурс» т/ф 8 (383) 363-26-24, 291-93-02 630020 Россия г.Новосибирс ул.Объединения д.9 e-mail: resurszao@
EN 1044 : CP 201
Copper-phosphor brazing rod with
DIN 8513 : L-Cu8P
8%P
EN ISO 3677 : BCu92P710-770
Application field
UTP 37 is suited for joining copper to copper without flux. With flux it can also be used for joining brass
and bronze and red brass. Not suitable for steel and nickel alloys.
Heating sources
Acetylene torch, HF-induction
Technical data
Working temperature Tensile strength
Rm
°C MPa
710 250 (an Cu)
Weld metal analysis in %
P Cu
8,0 balance
Instructions
Clean solder joint thoroughly, apply UTP flux on solder joint. Large weldments must be preheated right
through until flux flows like water. Place rod onto groove, melting off a small droplet which is spread out
or drawn along with the flame.
Flame adjustment
Acetylene torch (excess fuel gas)
Availability
Rods Ø mm x 500 mm 2,0 3,0
Special types available on request
Fluxes
UTP Flux AGX Universal silver-solder-flux in powder form
UTP Flux 3 W Universal silver-solder-flux in powder form