Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 30 views

    Utp A 80 M: Classifications

    Uploaded by

    Inaam
    UTP A 80 M is a solid wire suitable for joining and surfacing nickel-copper alloys and nickel-copper clad steels. It can also join different materials like steel to copper alloys or steel to nickel-copper alloys. These materials are used in high-grade apparatus for chemical and petrochemical industries, as well as seawater evaporation plants. The weld metal has excellent resistance to corrosive media like water, acids, alkalis and salt solutions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Utp A 80 M: Classifications

    Uploaded by

    Inaam
    30 views1 page
    UTP A 80 M is a solid wire suitable for joining and surfacing nickel-copper alloys and nickel-copper clad steels. It can also join different materials like steel to copper alloys or steel to nickel-copper alloys. These materials are used in high-grade apparatus for chemical and petrochemical industries, as well as seawater evaporation plants. The weld metal has excellent resistance to corrosive media like water, acids, alkalis and salt solutions.

    Original Title

    13062016000000UTP A 80 M_2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    UTP A 80 M is a solid wire suitable for joining and surfacing nickel-copper alloys and nickel-copper clad steels. It can also join different materials like steel to copper alloys or steel to nickel-copper alloys. These materials are used in high-grade apparatus for chemical and petrochemical industries, as well as seawater evaporation plants. The weld metal has excellent resistance to corrosive media like water, acids, alkalis and salt solutions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    30 views1 page

    Utp A 80 M: Classifications

    Uploaded by

    Inaam
    UTP A 80 M is a solid wire suitable for joining and surfacing nickel-copper alloys and nickel-copper clad steels. It can also join different materials like steel to copper alloys or steel to nickel-copper alloys. These materials are used in high-grade apparatus for chemical and petrochemical industries, as well as seawater evaporation plants. The weld metal has excellent resistance to corrosive media like water, acids, alkalis and salt solutions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    UTP A 80 M

    solid wire

    Classifications
    EN ISO 18274 AWS A5.14 Material-No.
    S Ni 4060 (NiCu30Mn3Ti) ER NiCu-7 2.4377
    Characteristics and field of use
    UTP A 80 M is suitable for joining and surfacing of nickel-copper alloys and of nickel-
    opper-clad steels. Particularly suited for the following materials: 2.4360 NiCu30Fe,
    2.4375 NiCu30Al.

    UTP A 80 M is also used for joining different materials, such as steel to copper and copper alloys,
    steel to nickel-copper alloys. These materials are employed in high-grade apparatus construction,
    primarily for the chemical and petrochemical industries. A special application field is the fabrication
    of seawater evaporation plants and marine equipment.

    The weld metal has an excellent resistance to a large amount of corrosive medias, from pure water
    to nonoxidising mineral acids, alkali and salt solutions.

    Typical analysis in %
    C Si Mn Cu Ni Ti Fe
    < 0.02 0.3 3.2 29.0 balance 2.4 1.0
    Mechanical properties of the weld metal
    Yield strength RP0.2 Tensile strength Rm Elongation A Impact strength KV
    MPa MPa % J (RT)
    > 300 > 480 > 30 > 80
    Welding instruction
    Clean the weld area thotoughly to avoid porosity. Opening groove angle about 70 °.
    Weld stringer beads.

    Approvals
    TÜV (No. 00250), ABS, GL
    Wire diameter [mm] Current type Shielding gas (EN ISO 14175)
    0.8* DC (+) I1 I3 Z-ArHeHC-30/2/0.05
    1.0 DC (+) I1 I3 Z-ArHeHC-30/2/0.05
    1.2 DC (+) I1 I3 Z-ArHeHC-30/2/0.05
    *available on request

    All information provided is based upon careful investigation and intensive research. 03/2014 Rev. 0
    However, we do not assume any liability for correctness and information is subject to change without notice. www.voestalpine.com/welding

    You might also like