Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 45 views

    Cuñero, VR 2 150 Keyway, VR 2 150: Cambios / Changes

    Uploaded by

    tauasi_1
    This document provides technical specifications for a keyway part including dimensions, tolerances, and other machining details. Key details include: - The part has a through hole drilled at 0.196" with 1/4-20 UNC threading and sections labeled A-A showing additional dimensions. - Machining and dimensional tolerances are specified according to ASME standards. Integer and fractional dimensions have a tolerance of ±0.015" while dimensions ending in 0.XXX" have a tolerance of ±0.005". - Additional specifications include break all sharp corners at 0.015" x 45 degrees and off-angle drill tolerances of ±0.30'.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Cuñero, VR 2 150 Keyway, VR 2 150: Cambios / Changes

    Uploaded by

    tauasi_1
    45 views1 page
    This document provides technical specifications for a keyway part including dimensions, tolerances, and other machining details. Key details include: - The part has a through hole drilled at 0.196" with 1/4-20 UNC threading and sections labeled A-A showing additional dimensions. - Machining and dimensional tolerances are specified according to ASME standards. Integer and fractional dimensions have a tolerance of ±0.015" while dimensions ending in 0.XXX" have a tolerance of ±0.005". - Additional specifications include break all sharp corners at 0.015" x 45 degrees and off-angle drill tolerances of ±0.30'.

    Original Description:

    AD ASD DADASDASGRBHGFT N DF

    Original Title

    A 161381

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides technical specifications for a keyway part including dimensions, tolerances, and other machining details. Key details include: - The part has a through hole drilled at 0.196" with 1/4-20 UNC threading and sections labeled A-A showing additional dimensions. - Machining and dimensional tolerances are specified according to ASME standards. Integer and fractional dimensions have a tolerance of ±0.015" while dimensions ending in 0.XXX" have a tolerance of ±0.005". - Additional specifications include break all sharp corners at 0.015" x 45 degrees and off-angle drill tolerances of ±0.30'.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    45 views1 page

    Cuñero, VR 2 150 Keyway, VR 2 150: Cambios / Changes

    Uploaded by

    tauasi_1
    This document provides technical specifications for a keyway part including dimensions, tolerances, and other machining details. Key details include: - The part has a through hole drilled at 0.196" with 1/4-20 UNC threading and sections labeled A-A showing additional dimensions. - Machining and dimensional tolerances are specified according to ASME standards. Integer and fractional dimensions have a tolerance of ±0.015" while dimensions ending in 0.XXX" have a tolerance of ±0.005". - Additional specifications include break all sharp corners at 0.015" x 45 degrees and off-angle drill tolerances of ±0.30'.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    161381 REF: FIP-17.

    0.500"
    12.7mm
    0.131"
    0.128"
    A 3.33mm
    3.25mm

    DRILL THRUO0.196"
    THREAD SIZE 1/4-20 UNC
    BNO. PASADO O0.196"
    CUERDA 1/4-20 UNC

    O 1.250"
    31.75mm
    0.319"
    0.316"
    8.09mm
    8.01mm

    0.506"
    O 0.504"
    A 12.85mm
    12.8mm
    SECTION A-A
    SECCIÓN A-A

    A MENOS QUE SE INDIQUE OTRA COSA / UNLESS OTHERWISE SPECIFIED DIBUJÓ / DRAWN
    R

    ACOTACION EN PULGADAS [mm] / DIMENSIONS ARE IN INCHES [mm] J. RODRÍGUEZ


    MAQUINADO GENERAL 125 µpulgadas [3.2 µmm] / MACHINING SURFACES 125 µinches [3.2 µmm] INGENIERÍA DEL PRODUCTO
    MATAR FILOS 0.015" [0.38 mm] x 45° / BREAK ALL SHARP CORNERS 0.015" [0.38 mm] x 45° REVISÓ / CHECKED
    TITULO / TITLE:
    DIMENSIONES Y TOLERANCIAS POR ASME Y14.5-2009 / INTERPRET DIM AND TOL PER ASME Y14.5-2009 E. HERNÁNDEZ
    TOLERANCIAS NO INDICADAS / NOT NOTED TOLERANCES FECHA / DATE
    24/11/2017
    CUÑERO, VR 2 150
    ENTEROS Y FRACCIONES / INTEGERS AND FRACTIONAL: ± 0.015" [0.4mm]
    0.XXX" : ± 0.005" [0.13 mm] ESCALA / SCALE KEYWAY, VR 2 150
    PARA ANGULARES / TO ANGULAR: ± 0°30' 2:1
    FECHA POR BARRENOS FUERA ANGULO / OFF-ANGLE DRILL : ± 0°30' PROCESO / PROCESS TAMAÑO / SIZE No. REV.
    REV. CAMBIOS / CHANGES DATE BY
    OK DISTANCIA ENTRE BARRENOS / BETWEEN HOLES DISTANCE : ± 0.005" [0.13 mm] MACHINING A 161381 -

    You might also like