LM358, LM258, LM158, LM2904 Dual Operational Amplifiers: 1 Features 2 Applications
LM358, LM258, LM158, LM2904 Dual Operational Amplifiers: 1 Features 2 Applications
LM358, LM258, LM158, LM2904 Dual Operational Amplifiers: 1 Features 2 Applications
IN+ + OUT
IN− −
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V
SLOS068U – JUNE 1976 – REVISED JANUARY 2017 www.ti.com
Table of Contents
1 Features .................................................................. 1 8.2 Functional Block Diagram ....................................... 12
2 Applications ........................................................... 1 8.3 Feature Description................................................. 13
3 Description ............................................................. 1 8.4 Device Functional Modes........................................ 13
4 Revision History..................................................... 2 9 Application and Implementation ........................ 14
9.1 Application Information............................................ 14
5 Pin Configuration and Functions ......................... 3
9.2 Typical Application ................................................. 14
6 Specifications......................................................... 4
6.1 Absolute Maximum Ratings ...................................... 4 10 Power Supply Recommendations ..................... 15
6.2 ESD Ratings.............................................................. 4 11 Layout................................................................... 15
6.3 Recommended Operating Conditions....................... 4 11.1 Layout Guidelines ................................................. 15
6.4 Thermal Information .................................................. 5 11.2 Layout Examples................................................... 16
6.5 Electrical Characteristics for LMx58.......................... 5 12 Device and Documentation Support ................. 17
6.6 Electrical Characteristics for LM2904 ....................... 6 12.1 Documentation Support ........................................ 17
6.7 Electrical Characteristics for LM158A and LM258A . 7 12.2 Related Links ........................................................ 17
6.8 Electrical Characteristics for LM358A ....................... 7 12.3 Receiving Notification of Documentation Updates 17
6.9 Operating Conditions ................................................ 8 12.4 Community Resources.......................................... 17
6.10 Typical Characteristics ............................................ 9 12.5 Trademarks ........................................................... 17
7 Parameter Measurement Information ................ 11 12.6 Electrostatic Discharge Caution ............................ 17
12.7 Glossary ................................................................ 17
8 Detailed Description ............................................ 12
8.1 Overview ................................................................. 12 13 Mechanical, Packaging, and Orderable
Information ........................................................... 18
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
• Added Applications section, ESD Ratings table, Feature Description section, Device Functional Modes, Application
and Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation
Support section, and Mechanical, Packaging, and Orderable Information section ............................................................... 1
• Converted this data sheet from the QS format to DocZone using the PDF on the web ........................................................ 1
• Deleted Ordering Information table ........................................................................................................................................ 1
• Updated Features to include Military Disclaimer .................................................................................................................... 1
• Added Typical Characteristics section.................................................................................................................................... 9
• Added ESD warning ............................................................................................................................................................. 17
Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V
LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V
www.ti.com SLOS068U – JUNE 1976 – REVISED JANUARY 2017
1OUT
V CC+
1OUT 1 8 VCC
NC
NC
NC
1IN− 2 7 2OUT
3 2 1 20 19
1IN+ 3 6 2IN− NC 4 18 NC
GND 4 5 2IN+ 1IN− 5 17 2OUT
NC 6 16 NC
1IN+ 7 15 2IN−
NC 8 14 NC
9 10 11 12 13
GND
2IN+
NC
NC
NC
NC - No internal connection
Pin Functions
PIN
SOIC, SSOP,
CDIP, PDIP I/O DESCRIPTION
NAME LCCC NO.
SO, TSSOP,
CFP NO.
1IN– 5 2 I Negative input
1IN+ 7 3 I Positive input
1OUT 2 1 O Output
2IN– 15 6 I Negative input
2IN+ 12 5 I Positive input
2OUT 17 7 O Output
GND 10 4 — Ground
1
3
4
6
8
9
NC — — Do not connect
11
13
14
16
18
19
VCC — 8 — Power supply
VCC+ 20 — — Power supply
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
LMx58, LMx58x, LM2904 UNIT
LM2904V
MIN MAX MIN MAX
VCC Supply voltage (2) –0.3 ±16 or 32 –0.3 ±13 or 26 V
VID Differential input voltage (3) –32 32 –26 26 V
either
VI Input voltage –0.3 32 –0.3 26 V
input
Duration of output short circuit (one amplifier) to ground at
(or below) TA = 25°C, Unlimited Unlimited s
VCC ≤ 15 V (4)
LM158, LM158A –55 125
LM258, LM258A –25 85
TA Operating free air temperature °C
LM358, LM358A 0 70
LM2904 –40 125 –40 125
TJ Operating virtual junction temperature 150 150 °C
Case temperature for 60
FK package 260 °C
seconds
Lead temperature 1.6 mm (1/16
JG package 300 300 °C
inch) from case for 60 seconds
Tstg Storage temperature –65 150 –65 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.
(3) Differential voltages are at IN+, with respect to IN−.
(4) Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V
LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V
www.ti.com SLOS068U – JUNE 1976 – REVISED JANUARY 2017
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report.
(1) All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX
VCC for testing purposes is 26 V for LM2902 and 30 V for the others.
(2) Full range is –55°C to 125°C for LM158, –25°C to 85°C for LM258, and 0°C to 70°C for LM358, and –40°C to 125°C for LM2904.
(3) All typical values are at TA = 25°C
Copyright © 1976–2017, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V
LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V
SLOS068U – JUNE 1976 – REVISED JANUARY 2017 www.ti.com
Non-A-suffix 25°C 3 7
VCC = 5 V to MAX, devices Full range 10
VIO Input offset voltage VIC = VICR(min), mV
VO = 1.4 V 25°C 1 2
A-suffix devices
Full range 4
Average temperature coefficient
αVIO Full range 7 μV/°C
of input offset voltage
25°C 2 50
Non-V device
Full range 300
IIO Input offset current VO = 1.4 V nA
25°C 2 50
V-suffix device
Full range 150
Average temperature coefficient
αIIO Full range 10 pA/°C
of input offset current
25°C –20 –250
IIB Input bias current VO = 1.4 V nA
Full range –500
0 to
25°C
Common-mode input VCC – 1.5
VICR VCC = 5 V to MAX V
voltage range 0 to
Full range
VCC – 2
RL ≥ 10 kΩ 25°C VCC – 1.5
(1) All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX
VCC for testing purposes is 26 V for LM2902 and 32 V for LM2902V.
(2) Full range is –55°C to 125°C for LM158, –25°C to 85°C for LM258, 0°C to 70°C for LM358, and –40°C to 125°C for LM2904.
(3) All typical values are at TA = 25°C.
Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V
LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V
www.ti.com SLOS068U – JUNE 1976 – REVISED JANUARY 2017
Average temperature
αVIO coefficient of input Full range 7 15 (3) 7 15 µA/°C
offset voltage
25°C 2 10 2 15
IIO Input offset current VO = 1.4 V nA
Full range 30 30
Average temperature
αIIO coefficient of input Full range 10 200 10 200 pA/°C
offset current
25°C –15 –50 –15 –80
IIB Input bias current VO = 1.4 V nA
Full range –100 –100
0 to 0 to
25°C
Common-mode input VCC – 1.5 VCC – 1.5
VICR VCC = 30 V V
voltage range 0 to 0 to
Full range
VCC – 2 VCC – 2
RL ≥ 2 kΩ 25°C VCC – 1.5 VCC – 1.5
High-level output
VOH RL= 2kΩ Full range 26 26 V
voltage VCC = 30 V
RL≥ 10kΩ Full range 27 28 27 28
Low-level output
VOL RL ≤ 10 kΩ Full range 5 20 5 20 mV
voltage
Large-signal VCC = 15 V, VO = 1 V to 11 V, 25°C 50 100 50 100
AVD differential voltage V/mV
RL ≥ 2 kΩ Full range 25 25
amplification
Common-mode
CMRR 25°C 70 80 70 80 dB
rejection ratio
Supply-voltage
kSVR rejection ratio 25°C 65 100 65 100 dB
(ΔVD /ΔVIO)
Crosstalk
VO1/ VO2 f = 1 kHz to 20 kHz 25°C 120 120 dB
attenuation
VCC = 15 V, 25°C –20 –30 –60 –20 –30 −60
VID = 1 V, Source
VO = 0 Full range –10 –10
mA
IO Output current VCC = 15 V, 25°C 10 20 10 20
VID = –1 V, Sink
VO = 15 V Full range 5 5
(1) All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX
VCC for testing purposes is 26 V for LM2904 and 30 V for others.
(2) All typical values are at TA = 25°C.
(3) On products compliant to MIL-PRF-38535, this parameter is not production tested.
(1) All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX
VCC for testing purposes is 26 V for LM2904 and 30 V for others.
(2) All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX
VCC for testing purposes is 26 V for LM2904 and 30 V for others.
(3) All typical values are at TA = 25°C.
Copyright © 1976–2017, Texas Instruments Incorporated Submit Documentation Feedback 7
Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V
LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V
SLOS068U – JUNE 1976 – REVISED JANUARY 2017 www.ti.com
Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V
LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V
www.ti.com SLOS068U – JUNE 1976 – REVISED JANUARY 2017
20 0.36
18 0.34 –55C
16 0C
0.32
14 125C
12 0.3
10 0.28
8
0.26
6 5Vdc
15Vdc 0.24
4
30Vdc
2 0.22
0 0.2
–55 –35 –15 5 25 45 65 85 105 125 0 5 10 15 20 25 30
Temperature (°C) Supply Voltage (Vdc)
Figure 1. Input Current vs. Temperature Figure 2. Supply Current vs. Supply Voltage
160 100
RL=20K 90 CMRR
140
RL=2K 80
120
Avol Voltage Gain (dB)
70
100
CMRR (dB)
60
80 50
40
60
30
40
20
20 10
0 0
0 5 10 15 20 25 30 35 40 0.1 1 10 100 1000
V+ Supply Voltage (Vdc) Frequency (kHz) C001
Figure 3. Voltage Gain vs. Supply Voltage Figure 4. Common-mode Rejection Ratio vs. Frequency
3.5 0.50
VOUT
3.0 0.45
2.5
0.40
Voltage (V)
Voltage (V)
2.0
0.35
1.5
0.30
1.0
0.25
0.5
VOUT
0.0 0.20
0 4 8 12 16 20 24 28 32 36 40 0 2 4 6 8 10
Time ( s) C001
Time ( s) C001
Figure 5. Voltage Follower Large Signal Response (50 pF) Figure 6. Voltage Follower Small Signal Response (50 pF)
6
12.5
5
10
4
7.5
3
5
2.5 2
0 1
1 10 100 1k 0.001 0.01 0.1 1 10 100
Frequency (kHz) Output Sink Current (mAdc)
Figure 7. Maximum Output Swing vs. Frequency Figure 8. Output Sourcing Characteristics
(VCC = 15 V)
10 90
5Vdc
80
15Vdc
1 60
50
40
0.1 30
20
10
0.01 0
0.001 0.01 0.1 1 10 100 –55 –35 –15 5 25 45 65 85 105 125
Output Sink Current (mAdc) Temperature (°C)
Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V
LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V
www.ti.com SLOS068U – JUNE 1976 – REVISED JANUARY 2017
8 Detailed Description
8.1 Overview
These devices consist of two independent, high-gain frequency-compensated operational amplifiers designed to
operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the
difference between the two supplies is 3 V to 32 V (3 V to 26 V for the LM2904 device), and VCC is at least 1.5 V
more positive than the input common-mode voltage. The low supply-current drain is independent of the
magnitude of the supply voltage.
Applications include transducer amplifiers, DC amplification blocks, and all the conventional operational amplifier
circuits that now can be implemented more easily in single-supply-voltage systems. For example, these devices
can be operated directly from the standard 5-V supply used in digital systems and easily can provide the required
interface electronics without additional ±5-V supplies.
VCC+
OUT
IN−
IN+ ≈50-µA
Current
Regulator
To Other Amplifier
COMPONENT COUNT
Epi-FET 1
Diodes 2
Resistors 7
Transistors 51
Capacitors 2
Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V
LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V
www.ti.com SLOS068U – JUNE 1976 – REVISED JANUARY 2017
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
RI Vsup+
VOUT
+
VIN
Vsup-
(1)
(2)
Once the desired gain is determined, choose a value for RI or RF. Choosing a value in the kilohm range is
desirable because the amplifier circuit will use currents in the milliamp range. This ensures the part will not draw
too much current. This example will choose 10 kΩ for RI which means 36 kΩ will be used for RF. This was
determined by Equation 3.
(3)
Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V
LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V
www.ti.com SLOS068U – JUNE 1976 – REVISED JANUARY 2017
0.5
Volts
0
-0.5
-1
-1.5
-2
0 0.5 1 1.5 2
Time (ms)
CAUTION
Supply voltages larger than 32 V for a single supply (26 V for the LM2904), or outside
the range of ±16 V for a dual supply (±13 V for the LM2904) can permanently damage
the device (see the Absolute Maximum Ratings).
Place 0.1-μF bypass capacitors close to the power-supply pins to reduce errors coupling in from noisy or high
impedance power supplies. For more detailed information on bypass capacitor placement, refer to the Layout.
11 Layout
RIN
VIN +
VOUT
RG
RF
Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V
LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V
www.ti.com SLOS068U – JUNE 1976 – REVISED JANUARY 2017
12.5 Trademarks
E2E is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
12.6 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
12.7 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms and definitions.
Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V
PACKAGE OPTION ADDENDUM
www.ti.com 18-Apr-2018
PACKAGING INFORMATION
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) (6) (3) (4/5)
5962-87710012A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962-
87710012A
LM158FKB
5962-8771001PA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 8771001PA
LM158
5962-87710022A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962-
87710022A
LM158AFKB
5962-8771002PA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 8771002PA
LM158A
LM158AFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962-
87710022A
LM158AFKB
LM158AJG ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 LM158AJG
LM158AJGB ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 8771002PA
LM158A
LM158FKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962-
87710012A
LM158FKB
LM158JG ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 LM158JG
LM158JGB ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 8771001PA
LM158
LM258AD ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM258A
& no Sb/Br)
LM258ADGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAU | Level-1-260C-UNLIM -25 to 85 (M3L, M3P, M3S, M3
& no Sb/Br) CU NIPDAUAG U)
LM258ADGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 (M3L, M3P, M3S, M3
& no Sb/Br) U)
LM258ADR ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU | CU SN Level-1-260C-UNLIM -25 to 85 LM258A
& no Sb/Br)
LM258ADRE4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM258A
& no Sb/Br)
LM258ADRG4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM258A
& no Sb/Br)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com 18-Apr-2018
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) (6) (3) (4/5)
LM258AP ACTIVE PDIP P 8 50 Pb-Free CU NIPDAU | CU SN N / A for Pkg Type -25 to 85 LM258AP
(RoHS)
LM258APE4 ACTIVE PDIP P 8 50 TBD Call TI Call TI -25 to 85 LM258AP
LM2904AVQDR ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904AV
& no Sb/Br)
LM2904AVQDRG4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904AV
& no Sb/Br)
LM2904AVQPWR ACTIVE TSSOP PW 8 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904AV
& no Sb/Br)
LM2904AVQPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904AV
& no Sb/Br)
LM2904D ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2904
& no Sb/Br)
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com 18-Apr-2018
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) (6) (3) (4/5)
LM2904DE4 ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2904
& no Sb/Br)
LM2904DG4 ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2904
& no Sb/Br)
LM2904DGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAU | Level-1-260C-UNLIM -40 to 125 (MBL, MBP, MBS, MB
& no Sb/Br) CU NIPDAUAG U)
LM2904DGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 (MBL, MBP, MBS, MB
& no Sb/Br) U)
LM2904DR ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU | CU SN Level-1-260C-UNLIM -40 to 125 LM2904
& no Sb/Br)
LM2904DRE4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2904
& no Sb/Br)
LM2904DRG3 ACTIVE SOIC D 8 2500 Green (RoHS CU SN Level-1-260C-UNLIM -40 to 125 LM2904
& no Sb/Br)
LM2904DRG4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2904
& no Sb/Br)
LM2904P ACTIVE PDIP P 8 50 Pb-Free CU NIPDAU | CU SN N / A for Pkg Type -40 to 125 LM2904P
(RoHS)
LM2904PE4 ACTIVE PDIP P 8 50 TBD Call TI Call TI -40 to 125 LM2904P
LM2904PSR ACTIVE SO PS 8 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904
& no Sb/Br)
LM2904PW ACTIVE TSSOP PW 8 150 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904
& no Sb/Br)
LM2904PWG4 ACTIVE TSSOP PW 8 150 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904
& no Sb/Br)
LM2904PWR ACTIVE TSSOP PW 8 2000 Green (RoHS CU NIPDAU | CU SN Level-1-260C-UNLIM -40 to 125 L2904
& no Sb/Br)
LM2904PWRG3 ACTIVE TSSOP PW 8 2000 Green (RoHS CU SN Level-1-260C-UNLIM -40 to 125 L2904
& no Sb/Br)
LM2904PWRG4-JF ACTIVE TSSOP PW 8 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904
& no Sb/Br)
LM2904QDR ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 2904Q1
& no Sb/Br)
LM2904QDRG4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 2904Q1
& no Sb/Br)
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com 18-Apr-2018
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) (6) (3) (4/5)
LM2904VQDR ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904V
& no Sb/Br)
LM2904VQDRG4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904V
& no Sb/Br)
LM2904VQPWR ACTIVE TSSOP PW 8 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904V
& no Sb/Br)
LM2904VQPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904V
& no Sb/Br)
LM358AD ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM358A
& no Sb/Br)
LM358ADE4 ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM358A
& no Sb/Br)
LM358ADG4 ACTIVE SOIC D 8 75 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM358A
& no Sb/Br)
LM358ADGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAU | Level-1-260C-UNLIM 0 to 70 (M6L, M6P, M6S, M6
& no Sb/Br) CU NIPDAUAG U)
LM358ADGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 (M6L, M6P, M6S, M6
& no Sb/Br) U)
LM358ADR ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU | CU SN Level-1-260C-UNLIM 0 to 70 LM358A
& no Sb/Br)
LM358ADRE4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM358A
& no Sb/Br)
LM358ADRG4 ACTIVE SOIC D 8 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM358A
& no Sb/Br)
LM358AP ACTIVE PDIP P 8 50 Pb-Free CU NIPDAU | CU SN N / A for Pkg Type 0 to 70 LM358AP
(RoHS)
LM358APE4 ACTIVE PDIP P 8 50 TBD Call TI Call TI 0 to 70 LM358AP
Addendum-Page 4
PACKAGE OPTION ADDENDUM
www.ti.com 18-Apr-2018
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) (6) (3) (4/5)
Addendum-Page 5
PACKAGE OPTION ADDENDUM
www.ti.com 18-Apr-2018
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) (6) (3) (4/5)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
• Automotive: LM2904-Q1
Addendum-Page 6
PACKAGE OPTION ADDENDUM
www.ti.com 18-Apr-2018
• Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
• Enhanced Product - Supports Defense, Aerospace and Medical Applications
Addendum-Page 7
PACKAGE MATERIALS INFORMATION
www.ti.com 15-Dec-2017
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com 15-Dec-2017
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com 15-Dec-2017
Pack Materials-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com 15-Dec-2017
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
LM258DGKR VSSOP DGK 8 2500 332.0 358.0 35.0
LM258DR SOIC D 8 2500 364.0 364.0 27.0
LM258DR SOIC D 8 2500 340.5 338.1 20.6
LM258DR SOIC D 8 2500 367.0 367.0 35.0
LM258DR SOIC D 8 2500 333.2 345.9 28.6
LM258DRG3 SOIC D 8 2500 364.0 364.0 27.0
LM258DRG3 SOIC D 8 2500 333.2 345.9 28.6
LM258DRG4 SOIC D 8 2500 340.5 338.1 20.6
LM258DRG4 SOIC D 8 2500 367.0 367.0 35.0
LM2904AVQDR SOIC D 8 2500 340.5 338.1 20.6
LM2904AVQDRG4 SOIC D 8 2500 340.5 338.1 20.6
LM2904AVQPWR TSSOP PW 8 2000 367.0 367.0 35.0
LM2904AVQPWRG4 TSSOP PW 8 2000 367.0 367.0 35.0
LM2904DGKR VSSOP DGK 8 2500 364.0 364.0 27.0
LM2904DGKR VSSOP DGK 8 2500 332.0 358.0 35.0
LM2904DGKR VSSOP DGK 8 2500 358.0 335.0 35.0
LM2904DR SOIC D 8 2500 340.5 338.1 20.6
LM2904DR SOIC D 8 2500 364.0 364.0 27.0
LM2904DR SOIC D 8 2500 367.0 367.0 35.0
LM2904DRG3 SOIC D 8 2500 364.0 364.0 27.0
LM2904DRG3 SOIC D 8 2500 333.2 345.9 28.6
LM2904DRG4 SOIC D 8 2500 367.0 367.0 35.0
LM2904DRG4 SOIC D 8 2500 340.5 338.1 20.6
LM2904PSR SO PS 8 2000 367.0 367.0 38.0
LM2904PWR TSSOP PW 8 2000 367.0 367.0 35.0
LM2904PWR TSSOP PW 8 2000 364.0 364.0 27.0
LM2904PWRG3 TSSOP PW 8 2000 364.0 364.0 27.0
LM2904PWRG4-JF TSSOP PW 8 2000 367.0 367.0 35.0
LM2904QDR SOIC D 8 2500 367.0 367.0 38.0
LM2904VQDR SOIC D 8 2500 340.5 338.1 20.6
LM2904VQPWR TSSOP PW 8 2000 367.0 367.0 35.0
LM2904VQPWRG4 TSSOP PW 8 2000 367.0 367.0 35.0
LM358ADGKR VSSOP DGK 8 2500 364.0 364.0 27.0
LM358ADGKR VSSOP DGK 8 2500 332.0 358.0 35.0
LM358ADR SOIC D 8 2500 340.5 338.1 20.6
LM358ADR SOIC D 8 2500 333.2 345.9 28.6
LM358ADR SOIC D 8 2500 367.0 367.0 35.0
LM358ADR SOIC D 8 2500 364.0 364.0 27.0
LM358ADRG4 SOIC D 8 2500 340.5 338.1 20.6
LM358ADRG4 SOIC D 8 2500 367.0 367.0 35.0
LM358APWR TSSOP PW 8 2000 364.0 364.0 27.0
LM358APWR TSSOP PW 8 2000 367.0 367.0 35.0
LM358APWRG4 TSSOP PW 8 2000 367.0 367.0 35.0
LM358DGKR VSSOP DGK 8 2500 332.0 358.0 35.0
Pack Materials-Page 4
PACKAGE MATERIALS INFORMATION
www.ti.com 15-Dec-2017
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
LM358DGKR VSSOP DGK 8 2500 358.0 335.0 35.0
LM358DGKR VSSOP DGK 8 2500 364.0 364.0 27.0
LM358DR SOIC D 8 2500 367.0 367.0 35.0
LM358DR SOIC D 8 2500 364.0 364.0 27.0
LM358DR SOIC D 8 2500 340.5 338.1 20.6
LM358DR SOIC D 8 2500 333.2 345.9 28.6
LM358DRG3 SOIC D 8 2500 364.0 364.0 27.0
LM358DRG3 SOIC D 8 2500 333.2 345.9 28.6
LM358DRG4 SOIC D 8 2500 340.5 338.1 20.6
LM358DRG4 SOIC D 8 2500 367.0 367.0 35.0
LM358PSR SO PS 8 2000 367.0 367.0 38.0
LM358PWR TSSOP PW 8 2000 367.0 367.0 35.0
LM358PWR TSSOP PW 8 2000 364.0 364.0 27.0
LM358PWRG3 TSSOP PW 8 2000 364.0 364.0 27.0
LM358PWRG4 TSSOP PW 8 2000 367.0 367.0 35.0
LM358PWRG4-JF TSSOP PW 8 2000 367.0 367.0 35.0
Pack Materials-Page 5
MECHANICAL DATA
0.400 (10,16)
0.355 (9,00)
8 5
0.280 (7,11)
0.245 (6,22)
1 4
0.065 (1,65)
0.045 (1,14)
0.023 (0,58)
0°–15°
0.015 (0,38)
0.100 (2,54) 0.014 (0,36)
0.008 (0,20)
4040107/C 08/96
C
6.6 SEATING PLANE
TYP
6.2
A PIN 1 ID 0.1 C
AREA
6X 0.65
8
1
3.1 2X
2.9
NOTE 3 1.95
4
5
0.30
8X
0.19
4.5 1.2 MAX
B 0.1 C A B
4.3
NOTE 4
(0.15) TYP
SEE DETAIL A
0.25
GAGE PLANE
0.75 0.15
0 -8 0.05
0.50
DETAIL A
TYPICAL
4221848/A 02/2015
NOTES:
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not
exceed 0.15 mm per side.
4. This dimension does not include interlead flash. Interlead flash shall not exceed 0.25 mm per side.
5. Reference JEDEC registration MO-153, variation AA.
www.ti.com
EXAMPLE BOARD LAYOUT
PW0008A TSSOP - 1.2 mm max height
SMALL OUTLINE PACKAGE
8X (1.5)
8X (0.45) SYMM
(R0.05)
1 TYP
8
SYMM
6X (0.65)
5
4
(5.8)
4221848/A 02/2015
NOTES: (continued)
www.ti.com
EXAMPLE STENCIL DESIGN
PW0008A TSSOP - 1.2 mm max height
SMALL OUTLINE PACKAGE
8X (1.5)
SYMM (R0.05) TYP
8X (0.45)
1
8
SYMM
6X (0.65)
5
4
(5.8)
4221848/A 02/2015
NOTES: (continued)
8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
9. Board assembly site may have different recommendations for stencil design.
www.ti.com
IMPORTANT NOTICE
Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its
semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers
should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
TI’s published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated
circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and
services.
Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced
documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements
different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the
associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Buyers and others who are developing systems that incorporate TI products (collectively, “Designers”) understand and agree that Designers
remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have
full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products
used in or for Designers’ applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with
respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous
consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and
take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will
thoroughly test such applications and the functionality of such TI products as used in such applications.
TI’s provision of technical, application or other design advice, quality characterization, reliability data or other services or information,
including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to
assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any
way, Designer (individually or, if Designer is acting on behalf of a company, Designer’s company) agrees to use any particular TI Resource
solely for this purpose and subject to the terms of this Notice.
TI’s provision of TI Resources does not expand or otherwise alter TI’s applicable published warranties or warranty disclaimers for TI
products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections,
enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically
described in the published documentation for a particular TI Resource.
Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that
include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE
TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY
RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or
endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
TI RESOURCES ARE PROVIDED “AS IS” AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR
REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO
ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL
PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM,
INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF
PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL,
DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN
CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949
and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements.
Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such
products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards
and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must
ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in
life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use.
Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life
support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all
medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S.
TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product).
Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications
and that proper product selection is at Designers’ own risk. Designers are solely responsible for compliance with all legal and regulatory
requirements in connection with such selection.
Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer’s non-
compliance with the terms and provisions of this Notice.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2018, Texas Instruments Incorporated