Obsolete: HMC189AMS8 / 189AMS8E
Obsolete: HMC189AMS8 / 189AMS8E
v03.0714
TE
Functional Diagram General Description
The HMC189AMS8(E) is a miniature passive
frequency doublers in plastic 8-lead MSOP packages.
LE The suppression of undesired fundamental and
higher order harmonics is 33 dB typical with respect
to input signal levels. The doubler uses the same
diode/balun technology used in Hittite MMIC mixers.
The doubler is ideal for high volume applications
where frequency doubling of a lower frequency
SO
is more economical than directly generating a higher
frequency. The passive Schottky diode doubler
technology contributes no measurable additive phase
noise onto the multiplied signal.
B
Conversion Loss @ +13 dBm Drive Level Isolation* @ +13 dBm Drive Level
0 0
-10 1F0
ISOLATION (dB)
-20 3F0
4F0
-15
-30
-20
-40C
+25C -40
-25 +85C
TE
-50
-30
-35 -60
2 3 4 5 6 7 8 9 10 0 2 4 6 8 10 12 14 16 18 20
-5
LE
+7 dBm
+10 dBm
Isolation* @ +10 dBm Drive Level
0
-10
1F0
CONVERSION LOSS (dB)
+13 dBm
+15 dBm 3F0
-10 -20 4F0
ISOLATION (dB)
-15 -30
SO
-20 -40
-25 -50
-30 -60
-35 -70
2 3 4 5 6 7 8 9 10 0 2 4 6 8 10 12 14 16 18 20
0 0
Input=2 GHz
-5 -5 Input=3 GHz
Input=4 GHz
RETURN LOSS (dB)
-10 -10
-15 -15
+7 dBm
-20 +10 dBm -20
+13 dBm
-25 -25
1 2 3 4 5 2 3 4 5 6 7 8 9 10
Outline Drawing
TE
LE
SO
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
B
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
[1] 189A
HMC189AMS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1
XXXX
[2] 189A
HMC189AMS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Pin Description
Pin Number Function Description Interface Schematic
These pins are not connected internally; however, all data shown herein
2 RFIN Pin is DC coupled and matched to 50 Ohms from 2.0 to 4.0 GHz
TE
3, 6 GND All ground leads must be soldered to PCB RF/DC ground.
7 RFOUT Pin is DC coupled and matched to 50 Ohms from 4.0 to 8.0 GHz
Evaluation PCB
LE
SO
B
O