HMC 410 A
HMC 410 A
v00.0410
GaAs MMIC DOUBLE-BALANCED
HIGH IP3 MIXER, 9 - 15 GHz
10 • Microwave Radio
• VSAT
LO/IF Isolation: 37 dB
Input IP3: +24 dBm
No External Components
Mixers - SINGLE & DOUBLE BALANCED - SMT
TE
Functional Diagram General Description
IF = 1.45 GHz
Parameter LO = +17 dBm Units
Min. Typ. Max.
Frequency Range, RF & LO 9 - 15 GHz
Frequency Range, IF DC - 2.5 GHz
Conversion Loss 8 11 dB
Noise Figure (SSB) 8 11 dB
LO to RF Isolation 30 40 - 45 dB
LO to IF Isolation 30 37 dB
RF to IF Isolation 8 17 dB
IP3 (Input) 20 24 dBm
1 dB Compression (Input) 11 14 dBm
* Unless otherwise noted, all measurements performed as downconverter, IF= 1.45 GHz.
RF/IF
-10 LO/RF
CONVERSION GAIN (dB)
10
-5 LO/IF
ISOLATION (dB)
-20
-10 -30
TE
+25 C
-15 -40 C
+85 C
-50
-20 -60
8 9 10 11 12 13 14 15 16 8 9 10 11 12 13 14 15 16
FREQUENCY (GHz) FREQUENCY (GHz)
+11 dBm
+13 dBm
LE
+17 dBm
+19 dBm
Return Loss @ LO = +17 dBm
0
-5
CONVERSION GAIN (dB)
-5 +15 dBm
RETURN LOSS (dB)
-10
SO
-10
-15
-15 RF
-20 LO
-20 -25
8 9 10 11 12 13 14 15 16 8 9 10 11 12 13 14 15 16
FREQUENCY (GHz) FREQUENCY (GHz)
B
Upconverter Performance
IF Bandwidth @ LO = +17 dBm Conversion Gain @ LO = +17 dBm
O
0 0
-5
CONVERSION GAIN (dB)
-5
RESPONSE (dB)
-10
-15 -10
-20
-15
-25 IF CONVERSION GAIN
IF RETURN LOSS
-30 -20
0 0.5 1 1.5 2 2.5 3 8 9 10 11 12 13 14 15 16
FREQUENCY (GHz) FREQUENCY (GHz)
10
30 30
P1dB (dBm)
P1dB (dBm)
25 25
Mixers - SINGLE & DOUBLE BALANCED - SMT
TE
+15 dBm +25 C
20 +17 dBm 20 -40 C
+19 dBm +85 C
15 15
9 10 11 12 13 14 15 9 10 11 12 13 14 15
FREQUENCY (GHz) FREQUENCY (GHz)
75
LE Temperature @ LO = +17 dBm
20
18
70
65
P1dB (dBm)
16
IP2 (dBm)
SO
60
+25 C
55 14 -40 C
+85 C
50
+15 dBm 12
+17 dBm
45 +19 dBm
40 10
9 10 11 12 13 14 15 9 10 11 12 13 14 15
FREQUENCY (GHz) FREQUENCY (GHz)
B
Outline Drawing
LE
SO
B
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
O
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
[1] H410A
HMC410AMS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1
XXXX
[2] H410A
HMC410AMS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Pin Descriptions
Pin Number Function Description Interface Schematic
10
connected to RF ground.
TE
The pins are not connected internally; however, all data shown
3, 4, 6 N/C herein was measured with these pins connected to RF/DC
ground externally.
This pin is DC coupled. For applications not requiring opera-
tion to DC this port should be DC blocked externally using a
series capacitor whose value has been chosen to pass the
5 IF
necessary IF frequency range. For operation to DC, this pin
7 RF
LE
must not source/sink more than 4mA of current or die non-
function and possible die failure will result.
Evaluation PCB
10