HMC698LP5 / 698LP5E

v03.0709
7 GHz INTEGER N SYNTHESIZER
(N = 12 - 259)

Typical Applications Features

The HMC698LP5(E) is ideal for: Ultra Low SSB Phase Noise Floor:
• Satellite Communication Systems -153 dBc/Hz @ 10 kHz offset @ 100 MHz
Reference Frequency.
• Point-to-Point Radios
Programmable Divider (N= 12 - 259) Operating
• Military Applications up to 7 GHz
• Sonet Clock Generation Open Collector Output Buffer Amplifiers for
Interfacing w/ Op-Amp Based Loop Filter
Reversible Polarity PFD w/ Lock Detect Output

6 32 Lead 5x5mm SMT Package: 25mm2

Functional Diagram General Description

PLL - INTEGER-n synthesizer - SMT

The HMC698LP5(E) is a frequency synthesizer with

a wideband reversible polarity digital PFD and lock
detect output. The divider operates unconditionally
from 80 - 7000 MHz with a continuous integer
division ratio of 12 to 259. The HMC698LP5(E) high
frequency operation along with ultra low phase noise
floor make possible synthesizers with wide loop
bandwidth and low N resulting in fast settling and
very low phase noise. When used in conjunction with
a differential loop filter, the HMC698LP5(E) can be
used to phase lock a VCO to a reference oscillator.

Electrical Specifications, TA = +25° C, Vcc = Vcc1 = Vcc2 = Vcc3 = Vcc_pd = 5V

Parameter Conditions Min. Typ. Max. Units
Maximum Ref. Input Frequency Sine or Square Wave Input [1] 1300 MHz
Minimum Ref. Input Frequency Square Wave Input [2] 10 MHz
Reference Input Power Range 100 MHz Frequency -5 +5 dBm
Maximum VCO Input Frequency 7000 MHz
Minimum VCO Input Frequency 80 MHz
VCO Input Power Range 100 MHz Input Frequency -10 +5 dBm

PFD Output Voltage 2000 mV, Pk - Pk

PFD Gain Gain = Vpp / 2π Rad. 0.32 V/Rad.

@ 10 kHz Offset @ 100 MHz Square Wave Ref. Input
SSB Phase Noise -153 dBc/Hz
Pin= 0 dBm
Total Supply Current 310 mA
[1] Maximum frequencies may be limited by available counter division ratio.
[2] Square wave input achieves best phase noise at lower ref. frequency (see sine & square wave comparison plots)

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to place orders: For price, 20
delivery, and to place orders: Analog
MADevices,
01824 Inc.,
responsibility is assumed by Analog Devices for its use, nor for anyHittite Microwave
infringements Corporation,
of patents or other Alpha Road, Chelmsford,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 Fax: 978-250-3373 Order
Phone: On-line at www.hittite.com
6-1 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 781-329-4700
Application
• Order online at www.analog.com
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. or apps@hittite.com
 HMC698LP5 / 698LP5E
v03.0709

7 GHz INTEGER N SYNTHESIZER

(N = 12 - 259)

Phase Noise Floor [1][2][3] Phase Noise Floor [1][2][3]

Ref = Sine Wave, Vcc = 4.75V Ref = Square Wave, Vcc = 4.75V
-100 -100

-110 -10 dBm -110 -10 dBm

SSB PHASE NOISE (dBc/Hz)

SSB PHASE NOISE (dBc/Hz)

-5 dBm -5 dBm
-120 0 dBm -120 0 dBm
+5 dBm +5 dBm

-130 -130

-140 -140

-150 -150

-160 -160

6
-170 -170

-180 -180
2 3 4 5 2 3 4 5
10 10 10 10 10 10 10 10
OFFSET FREQUENCY (Hz) OFFSET FREQUENCY (Hz)

PLL - INTEGER-n synthesizer - SMT

Phase Noise Floor [1][2][3] Phase Noise Floor [1][2][3]
Ref = Sine Wave, Vcc = 5V Ref = Square Wave, Vcc = 5V
-100 -100

-110 -10 dBm -110 -10 dBm

SSB PHASE NOISE (dBc/Hz)

SSB PHASE NOISE (dBc/Hz)

-5 dBm -5 dBm
0 dBm 0 dBm
-120 +5 dBm
-120 +5 dBm

-130 -130

-140 -140

-150 -150

-160 -160

-170 -170

-180 -180
2 3 4 5 2 3 4 5
10 10 10 10 10 10 10 10
OFFSET FREQUENCY (Hz) OFFSET FREQUENCY (Hz)

Phase Noise Floor [1][2][3] Phase Noise Floor [1][2][3]

Ref = Sine Wave, Vcc = 5.25V Ref = Square Wave, Vcc = 5.25V
-100 -100

-110 -10 dBm -110

SSB PHASE NOISE (dBc/Hz)

SSB PHASE NOISE (dBc/Hz)

-5 dBm
-120 0 dBm -120 -10 dBm
+5 dBm
-5 dBm
0 dBm
-130 -130 +5 dBm

-140 -140

-150 -150

-160 -160

-170 -170

-180 -180
2 3 4 5
10 10 10 10 10
2
10
3
10
4
10
5

OFFSET FREQUENCY (Hz) OFFSET FREQUENCY (Hz)

[1] Phase Noise Floor vs Offset Frequency with varying Ref Power Level
[2] Fin= 7000 MHz @ 0 dBm, Ref Frequency = 100 MHz, N = 70
[3] Phase Noise Floor remains constant beyond 100 kHz offset frequency

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to place orders: For price, 20
delivery, and to place orders: Analog
MADevices,
01824 Inc.,
responsibility is assumed by Analog Devices for its use, nor for anyHittite Microwave
infringements Corporation,
of patents or other Alpha Road, Chelmsford,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 Fax: 978-250-3373
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Order
Phone: On-line at www.hittite.com
781-329-4700 • Order online at www.analog.com 6-2
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. Application Support: Phone: 1-800-ANALOG-D
or apps@hittite.com
 HMC698LP5 / 698LP5E
v03.0709

7 GHz INTEGER N SYNTHESIZER

(N = 12 - 259)

Phase Noise Floor [1][2][3] Phase Noise Floor [1][2][3]

Ref = Sine Wave @ 5 dBm, Vcc = 5V Ref = Square Wave @ 5 dBm, Vcc = 5V
-100 -100

-110 -110
SSB PHASE NOISE (dBc/Hz)

SSB PHASE NOISE (dBc/Hz)

-120 -120 +25C
+25C
+85C +85C
-130 -45C -130 -45C

-140 -140

-150 -150

-160 -160

6
-170 -170

-180 -180
2 3 4 5 2 3 4 5
10 10 10 10 10 10 10 10
OFFSET FREQUENCY (Hz) OFFSET FREQUENCY (Hz)
PLL - INTEGER-n synthesizer - SMT

Phase Noise Floor vs Offset Frequency

with varying Fin @ 0 dbm, Ref = 100 MHz
Square Wave @ 5 dBm, Vcc = 5V [3]
-100

-110
SSB PHASE NOISE (dBc/Hz)

-120 1000 MHz

7000 MHz

-130

-140

-150

-160

-170

-180
2 3 4 5
10 10 10 10
OFFSET FREQUENCY (Hz)

[1] Phase Noise Floor vs Offset Frequency over temperature

[2] Fin= 7000 MHz @ 0 dBm, Ref Frequency = 100 MHz, N = 70
[3] Phase Noise Floor remains constant beyond 100 kHz offset frequency

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to place orders: For price, 20
delivery, and to place orders: Analog
MADevices,
01824 Inc.,
responsibility is assumed by Analog Devices for its use, nor for anyHittite Microwave
infringements Corporation,
of patents or other Alpha Road, Chelmsford,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 Fax: 978-250-3373 Order
Phone: On-line at www.hittite.com
6-3 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 781-329-4700
Application
• Order online at www.analog.com
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. or apps@hittite.com
 HMC698LP5 / 698LP5E
v03.0709

7 GHz INTEGER N SYNTHESIZER

(N = 12 - 259)

Absolute Maximum Ratings Typical Supply Current vs. Vcc

RF Input (Vcc= +5V) +10 dBm Vcc (Vdc) Icc (mA)
Supply Voltage (Vcc) +5.5V 4.75 294
Logic Inputs -0.5V to (0.5V + Vcc) 5.00 310
Junction Temperature (Tc) 135 °C 5.25 342
Continuous Pdiss (T = 85 °C) Note: HMC698LP5 will work over full voltage range above.
3.9 W
(derate 78 mW/° C above 85 °C)
Thermal Resistance
12.90 °C/W
(Junction to ground paddle)
Storage Temperature -65 to +150 °C ELECTROSTATIC SENSITIVE DEVICE
Operating Temperature -40 to +85 °C OBSERVE HANDLING PRECAUTIONS
6

PLL - INTEGER-n synthesizer - SMT

Typical DC Characteristics @ Vcc = +5V
+25C
Symbol Characteristics Units
Min. Typ. Max.
Power Supply
Icc 280 310 340 mA
Current
Output High
Voh 5 5 5 V
Voltage, (NU, ND)
Output Low
Vol 2.9 3.0 3.1 V
Voltage, (NU, ND)

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to place orders: For price, 20
delivery, and to place orders: Analog
MADevices,
01824 Inc.,
responsibility is assumed by Analog Devices for its use, nor for anyHittite Microwave
infringements Corporation,
of patents or other Alpha Road, Chelmsford,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 Fax: 978-250-3373
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Order
Phone: On-line at www.hittite.com
781-329-4700 • Order online at www.analog.com 6-4
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. Application Support: Phone: 1-800-ANALOG-D
or apps@hittite.com
 HMC698LP5 / 698LP5E
v03.0709

7 GHz INTEGER N SYNTHESIZER

(N = 12 - 259)

Outline Drawing

6
PLL - INTEGER-n synthesizer - SMT

NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
PCB LAND PATTERN.

Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
[1] H698
HMC698LP5 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1
XXXX
[2] H698
HMC698LP5(E) RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to place orders: For price, 20
delivery, and to place orders: Analog
MADevices,
01824 Inc.,
responsibility is assumed by Analog Devices for its use, nor for anyHittite Microwave
infringements Corporation,
of patents or other Alpha Road, Chelmsford,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 Fax: 978-250-3373 Order
Phone: On-line at www.hittite.com
6-5 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 781-329-4700
Application
• Order online at www.analog.com
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. or apps@hittite.com
 HMC698LP5 / 698LP5E
v03.0709

7 GHz INTEGER N SYNTHESIZER

(N = 12 - 259)

Pin Description
Pin Number Function Description Interface Schematic

Pulsed output.

1 LD Average “LOW” = UNLOCKED.

Average “HIGH” = LOCKED

PFD INVERT function

6
CMOS compatible input control bit

PLL - INTEGER-n synthesizer - SMT

2 INV
Logic “LOW” = NORMAL

Logic “HIGH” = INVERT

Vcc1, Vcc3,
4, 5, 18, 25 Supply Voltage 5V ±0.25V
Vcc2, Vcc_pd

9 - 14 N0 - N5 CMOS compatible control input bit 0 (LSB) - 5

15 FIN (These pins are AC coupled and must be DC Blocked externally.)

Frequency Input

16 NFIN Frequency Input Complement

CMOS compatible

22, 23 S1, S0 Control Input

bit 0 (LSB) -1

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to place orders: For price, 20
delivery, and to place orders: Analog
MADevices,
01824 Inc.,
responsibility is assumed by Analog Devices for its use, nor for anyHittite Microwave
infringements Corporation,
of patents or other Alpha Road, Chelmsford,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 Fax: 978-250-3373
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Order
Phone: On-line at www.hittite.com
781-329-4700 • Order online at www.analog.com 6-6
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. Application Support: Phone: 1-800-ANALOG-D
or apps@hittite.com
 HMC698LP5 / 698LP5E
v03.0709

7 GHz INTEGER N SYNTHESIZER

(N = 12 - 259)

Pin Description (Continued)

Pin Number Function Description Interface Schematic

28 REF
Reference Input

Reference Input Complement

(These pins are AC coupled and must be DC Blocked externally.)

6 27 NREF
PLL - INTEGER-n synthesizer - SMT

30 ND Down Output

31 NU Up Output

3, 6 - 8, 17,
No Connection. These pins may be connected to RF/DC ground.
19 - 21, 24, N/C
Performance will not be affected.
26, 29, 32

Ground Package bottom has an exposed ground paddle that must be

GND
Paddle connected to RF/DC ground

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to place orders: For price, 20
delivery, and to place orders: Analog
MADevices,
01824 Inc.,
responsibility is assumed by Analog Devices for its use, nor for anyHittite Microwave
infringements Corporation,
of patents or other Alpha Road, Chelmsford,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 Fax: 978-250-3373 Order
Phone: On-line at www.hittite.com
6-7 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 781-329-4700
Application
• Order online at www.analog.com
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. or apps@hittite.com
 HMC698LP5 / 698LP5E
v03.0709

7 GHz INTEGER N SYNTHESIZER

(N = 12 - 259)

HMC698LP5(E) Programming Truth Table

Division N Counter Swallow Swallow S (LSB) (LSB)
N Counter
Ratio n Decimal Set S Counter Decimal Set N0 N1 N2 N3 N4 N5 S0 S1
12 3 2 0 0 0 1 0 0 0 0 0 0
13 3 2 1 1 0 1 0 0 0 0 1 0
14 3 2 2 2 0 1 0 0 0 0 0 1
15 3 2 3 3 0 1 0 0 0 0 1 1
16 4 3 0 0 1 1 0 0 0 0 0 0
17 4 3 1 1 1 1 0 0 0 0 1 0

6
18 4 3 2 2 1 1 0 0 0 0 0 1
19 4 3 3 3 1 1 0 0 0 0 1 1
20 5 4 0 0 0 0 1 0 0 0 0 0
21 5 4 1 1 0 0 1 0 0 0 1 0

PLL - INTEGER-n synthesizer - SMT

22 5 4 2 2 0 0 1 0 0 0 0 1
23 5 4 3 3 0 0 1 0 0 0 1 1
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
252 63 62 0 0 0 1 1 1 1 1 0 0
253 63 62 1 1 0 1 1 1 1 1 1 0
254 63 62 2 2 0 1 1 1 1 1 0 1
255 63 62 3 3 0 1 1 1 1 1 1 1
256 64 63 0 0 1 1 1 1 1 1 0 0
257 64 63 1 1 1 1 1 1 1 1 1 0
258 64 63 2 2 1 1 1 1 1 1 0 1
259 64 63 3 3 1 1 1 1 1 1 1 1
N = INT (n/P)
S = MOD (n/P)
Where: n = Desired division ratio
P = Prescaler value = 4
N = Counter N value (counter decimal set is N - 1)

HMC698LP5(E) Programming Truth Table, Non-Continuous Division Ratios

Division N Counter Swallow Swallow S (LSB) (LSB)
N Counter
Ratio n Decimal Set S Counter Decimal Set N0 N1 N2 N3 N4 N5 S0 S1
8 2 1 0 0 1 0 0 0 0 0 0 0
9 2 1 1 1 1 0 0 0 0 0 1 0
10 2 1 2 2 1 0 0 0 0 0 0 1
N = INT (n/P)
S = MOD (n/P)
Where: n = Desired division ratio
P = Prescaler value = 4
N = Counter N value (counter decimal set is N - 1)

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to place orders: For price, 20
delivery, and to place orders: Analog
MADevices,
01824 Inc.,
responsibility is assumed by Analog Devices for its use, nor for anyHittite Microwave
infringements Corporation,
of patents or other Alpha Road, Chelmsford,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 Fax: 978-250-3373
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Order
Phone: On-line at www.hittite.com
781-329-4700 • Order online at www.analog.com 6-8
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. Application Support: Phone: 1-800-ANALOG-D
or apps@hittite.com
 HMC698LP5 / 698LP5E
v03.0709

7 GHz INTEGER N SYNTHESIZER

(N = 12 - 259)

Evaluation PCB Circuit

6
PLL - INTEGER-n synthesizer - SMT

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to place orders: For price, 20
delivery, and to place orders: Analog
MADevices,
01824 Inc.,
responsibility is assumed by Analog Devices for its use, nor for anyHittite Microwave
infringements Corporation,
of patents or other Alpha Road, Chelmsford,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 Fax: 978-250-3373 Order
Phone: On-line at www.hittite.com
6-9 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 781-329-4700
Application
• Order online at www.analog.com
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. or apps@hittite.com
 HMC698LP5 / 698LP5E
v03.0709

7 GHz INTEGER N SYNTHESIZER

(N = 12 - 259)

Evaluation PCB

PLL - INTEGER-n synthesizer - SMT

The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50
ohm impedance while the package backside ground paddle should be connected directly to the ground plane similar
to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hittite upon request.

List of Materials for Evaluation PCB Truth Table

Evaluation PCB 122625 [1] (see Programming Truth Table)
Item Description Note: 0 = Jumper Installed.
1 = Jumper Not Installed.
J1 - J4 PC Mount SMA RF Connector
J5 - J6 2mm DC Header
Note: The evaluation PCB for the HMC698LP5 contains
C1 - C5, C8 - C10 1000 pF Capacitor, 0402 Pkg
10K Ohm pull up resistors for each of the 9 control inputs.
C6 - C7 100 pF Capacitor, 0402 Pkg
Programming the 251 distinct division ratios consists of
C15 1000 pF Capacitor, 0603 Pkg
installing or removing jumpers N0 through N5 and S0, S1.
C16 4.7 μF Tantalum Capacitor Case A
D LED Green, 0603 Pkg
R1 10k Ohm, Resistor, Array
R8, R9 10k Ohm, Resistor, 0402 Pkg.
R11 1k Ohm, Resistor, 0402 Pkg.
R12 100 Ohm, Resistor, 0402 Pkg.
U1 HMC698LP5(E) Synthesizer
PCB [2] 116106 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to place orders: For price, 20
delivery, and to place orders: Analog
MADevices,
01824 Inc.,
responsibility is assumed by Analog Devices for its use, nor for anyHittite Microwave
infringements Corporation,
of patents or other Alpha Road, Chelmsford,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 Fax: 978-250-3373
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Order
Phone: On-line at www.hittite.com
781-329-4700 • Order online at www.analog.com 6 - 10
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. Application Support: Phone: 1-800-ANALOG-D
or apps@hittite.com
 HMC698LP5 / 698LP5E
v03.0709

7 GHz INTEGER N SYNTHESIZER

(N = 12 - 259)

Typical PLL Application Circuit using HMC698LP5

PLL application shown for a 13.0 GHz Fout. Contact HMC to discuss your specific application.

6
PLL - INTEGER-n synthesizer - SMT

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to place orders: For price, 20
delivery, and to place orders: Analog
MADevices,
01824 Inc.,
responsibility is assumed by Analog Devices for its use, nor for anyHittite Microwave
infringements Corporation,
of patents or other Alpha Road, Chelmsford,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 Fax: 978-250-3373 Order
Phone: On-line at www.hittite.com
6 - 11 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 781-329-4700
Application
• Order online at www.analog.com
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. or apps@hittite.com
 HMC698LP5 / 698LP5E
v03.0709

7 GHz INTEGER N SYNTHESIZER

(N = 12 - 259)

Typical Application Typical Application

Showing Spurious Performance 13 GHz Measured Phase Noise [1]
-100

-110

SSB PHASE NOISE (dBc/Hz)

-120

-130
MEASURED
CALCULATED
-140

-150

-160

-170

-180
6
2 3 4 5 6 7
10 10 10 10 10 10
OFFSET FREQUENCY (Hz)

PLL - INTEGER-n synthesizer - SMT

[1] Phase Noise Floor remains constant beyond 100 kHz offset
frequency. Measured phase noise using Agilent 5500 with 2 unit
measurement technique and corresponding calculated phase noise
floor.

CMOS/TTL Input Characteristics

Maximum Input Logic “0” Voltage (VIL MAXIMUM) = 1.1V @ 1 µA.
Minimum Input Logic “1” Voltage (VIH MINIMUM) = 1.8V @ 50 µA.
Input IV characteristics for the logic inputs (N0 - N5, S0 - S1) are shown below:

0.4

V V
IL MAX IH MIN
0.3
Input Current (mA)

0.2

0.1

-0.1
0 1 2 3 4 5
Input Voltage (V)

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

For price, delivery and to place orders: For price, 20
delivery, and to place orders: Analog
MADevices,
01824 Inc.,
responsibility is assumed by Analog Devices for its use, nor for anyHittite Microwave
infringements Corporation,
of patents or other Alpha Road, Chelmsford,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343 Fax: 978-250-3373
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Order
Phone: On-line at www.hittite.com
781-329-4700 • Order online at www.analog.com 6 - 12
Trademarks and registered trademarks are Application Support:
the property of their Phone: 978-250-3343
respective owners. Application Support: Phone: 1-800-ANALOG-D
or apps@hittite.com