HMC 512
HMC 512
v06.0114
Electrical Specifications, TA = +25° C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V
Parameter Min. Typ. Max. Units
Fo 9.6 - 10.8 GHz
Frequency Range
Fo/2 4.8 - 5.4 GHz
RFOUT +3 +15 dBm
Power Output RFOUT/2 +6 +14 dBm
RFOUT/4 -8 -3 dBm
SSB Phase Noise @ 100 kHz Offset,
-110 dBc/Hz
Vtune= +5V @ RFOUT
Tune Voltage Vtune 2 13 V
Supply Current Icc(Dig) + Icc(Amp) + Icc(RF) 250 330 370 mA
Tune Port Leakage Current (Vtune= 12V) 10 µA
Output Return Loss 3 dB
Harmonics/Subharmonics 1/2 33 dBc
2nd 25 dBc
3rd 35 dBc
Pulling (into a 2.0:1 VSWR) 5 MHz pp
Pushing @ Vtune= 5V 30 MHz/V
Frequency Drift Rate 1.2 MHz/°C
10.8 10.8
OUTPUT FREQUENCY (GHz)
10 10
9.6 9.6
9.2 9.2
8.8 8.8
8.4 8.4
8 8
0 1 2 3 4 5 6 7 8 9 10 11 12 13 0 1 2 3 4 5 6 7 8 9 10 11 12 13
TUNING VOLTAGE (Vdc) TUNING VOLTAGE (Vdc)
600 14
OUTPUT POWER (dBm)
SENSITIVITY (MHz/Volt)
12
500
10
400
8
300
6
200
4
100 2
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 0 1 2 3 4 5 6 7 8 9 10 11 12 13
TUNING VOLTAGE (Vdc) TUNING VOLTAGE (Vdc)
SSB Phase Noise vs. Tuning Voltage SSB Phase Noise @ Vtune = +5V
-75 -10
-20
-80 -30
SSB PHASE NOISE (dBc/Hz)
SSB PHASE NOISE (dBc/Hz)
-85 -40
-50
-90 -60
-70
-95
-80
-100 -90
-100
-105 -110
-120
-110
-130
-115 -140
-150
-120 -160
-125 -170
1e+2 1e+3 1e+4 1e+5 1e+6 1e+7
0 1 2 3 4 5 6 7 8 9 10 11 12 13
OFFSET FREQUENCY (Hz)
TUNING VOLTAGE (Vdc)
+25C +85C -40C
10khz 100khz
5.6 14
VCOS WITH Fo/2 OUTPUT - SMT
4.2 2
4 0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 0 1 2 3 4 5 6 7 8 9 10 11 12 13
TUNING VOLTAGE (Vdc) TUNING VOLTAGE (Vdc)
2.8 -1
OUTPUT FREQUENCY (GHz)
2.7 -2
OUTPUT POWER (dBm)
-3
2.6
-4
2.5
-5
2.4
-6
2.3
-7
2.2 -8
2.1 -9
2 -10
0 1 2 3 4 5 6 7 8 9 10 11 12 13 0 1 2 3 4 5 6 7 8 9 10 11 12 13
TUNING VOLTAGE (Vdc) TUNING VOLTAGE (Vdc)
Note: VCO will operate over full voltage range shown above.
Outline Drawing
Pin Descriptions
Pin Number Function Description Interface Schematic
1 - 3, 8 - 10, 13 - 18, No Connection. These pins may be connected to RF/
N/C
20, 22 - 28, 30 - 32 DC ground. Performance will not be affected.
Pin Descriptions
Pin Number Function Description Interface Schematic
VCOS WITH Fo/2 OUTPUT - SMT
Evaluation PCB