Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Datasheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

LOW VOLTAGE/POWER NARROW BAND FM IF S1T3361D

INTRODUCTION
16−DIP−300A
The S1T3361D is designed for use in FM dual conversion
communication. It contains a complete narrow band FM demodulation
system operable to less than 2.5V supply voltage. This low-power
narrow-band FM IF system provides the second converter, second IF,
demodulator. Filter Amp and squelch circuitry for communications and
scanning receivers.

16−SOP−225A
FEATURES

• Low power consumption (4.0mA typ. at VCC = 4.0V)


• Excellent input sensitivity
(-3dB limiting, 2.0µVrms typ.)
• Minimum number of external components required.
• Operating Voltage: 2.5 to 7.0V

APPLICATIONS

• Cordless phone (for home usage)


• FM dual conversion communications equipment

ORDERING INFORMATION

Device Package Operating Temperature


S1T3361D01-D0B0 16−DIP−300A
− 20°C to +70°C
S1T3361D01-S0B0 16−SOP−225A

1
S1T3361D LOW VOLTAGE/POWER NARROW BAND FM IF

PIN CONFIGURATION

RF
OSC 1 16 INPUT

OSC 2 15 GND

MIXER
OUTPUT
3 14 MUTE

SCAN
VCC 4 13 CONTROL
S1T3361D
LIMITER SQUELCH
INPUT 5 12 INPUT

FILTER
DECOUPLING 6 11 OUTPUT

FILTER
DECOUPLING 7 10 INPUT

QUADRATURE AUDIO
INPUT 8 9 OUTPUT

ABSOLUTE MAXIMUM RATINGS

Characteristic Symbol Value Unit


Max. Supply Voltage VCC (MAX) 10 V
Supply Voltage Range VCC 2.5 to 7.0 V
Detector Input Voltage VI (DET) 1.0 VP-P
RF Input Voltage (VCC ≥ 4.0V) VI (RF) 1.0 Vrms
Mute Function VMUTE − 0.5 to + 0.5 Vpeak
Operating Temperature TOPR − 20 to + 70 °C
Storage Temperature TSTG − 65 to + 150 °C

NOTE:
Absolute maximum ratings are those values beyond which permanent damage to the device may occur. These are stress
ratings only and functional operation of the device at or beyond them is not implied. Long exposure to these conditions may
affect device reliability.

2
LOW VOLTAGE/POWER NARROW BAND FM IF S1T3361D

ELECTRICAL CHARACTERISTICS

(VCC = 4.0V, fo = 10.7MHz, ∆f = ± 3kHz, fMOD = 1kHz, Ta = 25°C, unless otherwise specified)

Characteristic Symbol Test Conditions Min. Typ. Max. Unit


Operating Current ICC Squelch off (V12 = 2V) 2.0 4.0 8.0 mA
Squelch on (V12 = GND) 3.0 6.0 10 mA

Input Limiting Voltage VI (LIM) -3.0dB limiting − 2.0 6.0 µV


Detector Output Voltage VO (DET) − − 2.0 − Vdc
Detector Output Impedance ZO (DET) − − 400 − W
Recoverd audio output voltage VO Vin = 10mV 134 150 168 mVrms

Filter Gain GV f = 10kHz, Vin = 5mV 40 48 52 dB


Filter Output DC Voltage VO (DC) − 1.0 1.5 2.0 Vdc
Trigger Hysteresis of Filter VTH − − 50 − mV
Mute Switch-on Resistance RON (MUTE) Mute Low − 10 40 Ω
Mute Switch-off Resistance ROFF(MUTE) Mute High 1 - 10 MΩ
Scan Control Low Output VL (SCAN) Mute off (V12 = 2V) − − 0.5 Vdc

Scan Control High Output VH (SCAN) Mute on (V12 = GND) 3.0 − − Vdc

Mixer Conversion Gain GV (MIXER) − 30 36 − dB


Mixer Input Resistance RI (MIXER) − − 3.3 − kΩ
Mixer Input Capacitance CI (MIXER) − − 2.2 − pF

3
S1T3361D LOW VOLTAGE/POWER NARROW BAND FM IF

CHARACTERISTIC GRAPH

4
LOW VOLTAGE/POWER NARROW BAND FM IF S1T3361D

APPLICATION CIRCUIT

Mixer input Audio Scan Filter Filter Audio


10.7MHz Mute Control Amp out Amp in output
Squelch
SW input 1.0uF
51Ω 10kΩ 10nF

1.0uF 510kΩ
10nF 8.2kΩ
470kΩ
16 15 14 13 12 11 10 9
MIXIN GND MUTE SCAN SQ FOUT FIN AUDIO

S1T3361D

OSC OSC MIXOUT VCC LIMIN DECOLP LING QUAD


1 2 3 4 5 6 7 8

455MHz
68pF Filter
20kΩ
10.24MHz 220pF
0.1uF 0.1uF Quad coil
Vcc 0.1uF

In the above application circuit, the audio signal is recovered using a conventional quadrature FM detector.
The absence of an input signal is indicated by the presence of noise above the desired audio frequencies. This
“noise band” is monitored by an active filter and a detector. A squelch trigger circuit indicates the presence of
noise (or a tone) by an output which can be used to control scanning. At the same time, an internal switch is
operated which can be used to mute the audio.

5
S1T3361D LOW VOLTAGE/POWER NARROW BAND FM IF

NOTES

You might also like