Motherboard Parts and Functions

Motherboard Parts and Functions:
Getting to Know Your Hardware
The motherboard is one of the most important parts of the PC, but as a tech
enthusiast, you probably already know that. What you might not know,
though, is the role played by each chip, port or slot present on a
motherboard. A lot of people simply don’t care about these aspects, but if
you’re the do-it-yourself type, knowing everything there is to know when it
comes to motherboards can help you when it comes to troubleshooting,
upgrading or even building your own PC, despite the latter operation
already being simple if you
Motherboard Basics
A computer has many components, each with their own roles and
functions. The role of the motherboard is to allow all these components to
communicate with each other. Considering the fact that all the other
components are installed on the motherboard or connected to it, it is safe to
say that the motherboard is the central piece of a PC, the component that
brings it all together.
Processor Socket
The processor socket is the central piece of a motherboard, usually being
located near the center of the motherboard. It’s also the central piece
because it holds the processor – the brain of your computer.
Power Connectors
No computer component can operate without power, and a motherboard is
no exception. The power connector, commonly a 20 or 24-pin connector,
can be situated either near the right edge of the motherboard, or
somewhere close to the processor socket on older motherboards. This is
where the power supply’s main connector gets attached, providing power to
the motherboard and all the other components.
Newer motherboards have an additional 4-pin or 8-pin connector near the

processor, used to supply additional power directly to the processor.
Memory Slots
Located in the upper-right part of the motherboard, the memory slots are
used to house the computer’s memory modules. The number of slots can
vary, depending on motherboard, from 2, in low-end motherboards, all the
way up to 8 memory slots, on high-end and gaming motherboards.
It is important to pay close attention to the type of memory a motherboard

supports, in order to buy the appropriate memory modules. Newer
motherboards support DDR3 memory, the current industry standard
memory architecture, but motherboards with DDR2 memory slots and even
DDR1 memory slots are still present on the market. An interesting aspect is
that there are some older motherboard models that supported different
types of memory, and usually come with two DDR1 memory slots and 2
DDR2 memory slots, or two DDR2 slots and two DDR3 slots. These
motherboards were great options for people that wanted to upgrade a
motherboard without having to upgrade all the other components as well.
The number of memory slots should be an important criterion to take into

account when choosing a motherboard, as it will determine the maximum
amount of memory you can install.
Video Card Slot

This is the type of slot that doesn’t need an explanation, as its name doesn’t
leave much room for interpretation as to what its role is. Coming in the
form of a PCI-Express slot on newer motherboards or AGP on older ones,
the video card slot is situated right below the processor.
It is not uncommon for older motherboards, especially those that target the
office segment, to lack this slot, meaning that you won’t be able to install a
discrete video card, thus having to rely on the integrated one. At the
opposite pole, high-end gaming motherboards come with multiple video
card slots, allowing the installation of multiple video cards in a SLI or
CrossFire configuration.
Expansion Slots
Expansions have the role of letting you install additional components to
enhance or expand the functionality of your PC. You can install a TV tuner,
a video capture card, a better soundcard, etc. – you get the idea. These
ports are located under the video card slot, and come in the form of PCI
slots (on older motherboards) or a scaled-down version of PCI-Express
slots (on newer motherboards). Some motherboards come with both types
of expansion slots. The number of slots is usually dependent on the format
of the motherboard – larger motherboards (full ATX) have more, while
smaller formats (micro-ATX) have fewer, if any.
IDE and SATA Ports

IDE and SATA ports are used to provide connectivity for the storage devices
and optical drives. The IDE interface is somewhat outdated, so you
shouldn’t be surprised if you see a lot of new motherboards coming without
this type of port. It was replaced by the smaller and much faster SATA
interface, which currently reached its 3rdrevision, being able to achieve
maximum speeds of up to 600 MB/s, as opposed to the IDE interface,
which can reach a maximum of 133 MB/s.
It is not uncommon for manufacturers to include SATA ports of different

revisions, such as two SATA2 ports and two SATA3 ports. Considering the
fact that most optical drives on the market come with a SATA connector,
and these devices are not bandwidth-hungry, using a SATA2 port for an
optical drive is perfectly acceptable. In fact, most mechanical hard drives
cannot achieve SATA3 speeds due to mechanical limitations, so unless you
plan to use multiple high-performance solid state drives in your PC, which
can benefit of the higher speeds of SATA3, a combination of SATA2 and
SATA3 shouldn’t make much of a difference. If you’re not familiar with the
differences between classical hard drives and solid state drives,
BIOS Chip and Battery

The BIOS chip contains the basic code needed to take your computer
through the boot process, up to the point where the operating system takes
over. Since the BIOS code is stored on a memory chip that needs constant
power to function, a battery is also present to keep the chip powered when
the computer is unplugged.
Northbridge and Southbridge

If you have a look at your motherboard, chances are you’ll see a square
metal component somewhere in the lower-right part of the board. This
metal component is actually a heatsink, and its role is to provide thermal
protection for the Northbridge – one of the most important components of
a motherboard. The northbridge is responsible for coordinating the data
flow between the memory, the video card and the processor. A secondary
chip, known as Southbridge, has a similar function, coordinating the data
flow between the processor and peripherals such as sound cards or network
cards.
Front Panel Connectors, USB Headers and Audio

Header
The front panel connector is where all the elements present on the front of
your case are connected. Power button, reset button, power led, audio
connectors and USB connectors – they are all connected to the front panel
or the corresponding headers.
Rear Connectors
These connectors are the bridge between the outside of your computer and
the inside. The name is a bit misleading, as the connectors are actually
located on the left edge of the motherboard; however, since these
connectors are accessible from the outside, the name simply implies where
they are accessible from – the rear of the PC case. External peripherals such
as keyboard, mouse, monitor, speakers and so on are all connected via
these connectors.

Motherboard Parts and Functions

Uploaded by

Copyright:

Available Formats

Motherboard Parts and Functions

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Motherboard Parts and Functions

Uploaded by

Copyright:

Available Formats

Motherboard Parts and Functions:

Getting to Know Your Hardware

Newer motherboards have an additional 4-pin or 8-pin connector near the

It is important to pay close attention to the type of memory a motherboard

The number of memory slots should be an important criterion to take into

Video Card Slot

IDE and SATA Ports

It is not uncommon for manufacturers to include SATA ports of different

BIOS Chip and Battery

Northbridge and Southbridge

Front Panel Connectors, USB Headers and Audio

You might also like