Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
73 views

MM MM MM Kpa (Psi) Kpa (Psi) MM MM MM: Steps When D /T 10

The document contains a table with values for calculating the maximum allowable external working pressure for cylindrical shells or vessels with different diameter to thickness (D0/t) ratios and length to diameter (L/D0) ratios. The table provides the coefficient 'A' which is used in the calculation formula Pa=A*E*t/D0, where Pa is the maximum allowable external working pressure, E is the material's modulus of elasticity, t is the wall thickness and D0 is the external diameter. The table contains 'A' values for D0/t ranging from 100 to 500 and L/D0 ranging from 0.05 to 50.

Uploaded by

bibhansu
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
73 views

MM MM MM Kpa (Psi) Kpa (Psi) MM MM MM: Steps When D /T 10

The document contains a table with values for calculating the maximum allowable external working pressure for cylindrical shells or vessels with different diameter to thickness (D0/t) ratios and length to diameter (L/D0) ratios. The table provides the coefficient 'A' which is used in the calculation formula Pa=A*E*t/D0, where Pa is the maximum allowable external working pressure, E is the material's modulus of elasticity, t is the wall thickness and D0 is the external diameter. The table contains 'A' values for D0/t ranging from 100 to 500 and L/D0 ranging from 0.05 to 50.

Uploaded by

bibhansu
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Steps when D0/t ≥10

Outside Diameter of the Cylindrical Shell/Vessel,D0 mm Assume, t mm


Total Length (design length of the Vessel/tube), L mm Now, L/D0
External Design pressure, P kPa (psi) Now, D0/t
Max. allowable ext. working pr. for assumed thk. (calc), Pa kPa (psi)
Outside radius of the Cylindrical Shell/Vessel, R0 mm
Min. required thk. of cylindrical shell/vessel, t mm
Nominal thk. of cylindrical shell/vessel, ts mm
Calculated value of (D0 / t) Ratio
Table G
D0/T L/D0 'A' D0/T L/D0 'A' D0/T L/D0 'A' D0/T L/D0 'A'
100 0.05 0.0741 125 0.05 0.048 150 0.05 0.0338 200 0.05 0.0196
100 0.07 0.0398 125 0.06 0.0344 150 0.06 0.0224 200 0.06 0.0143
100 0.10 0.022 125 0.08 0.021 150 0.08 0.0151 200 0.08 0.00909
100 0.14 0.0133 125 0.10 0.0148 150 0.10 0.0108 200 0.10 0.00659
100 0.20 0.00831 125 0.14 0.00917 150 0.12 0.00833 200 0.14 0.00421
100 0.40 0.00364 125 0.20 0.00578 150 0.16 0.00569 200 0.20 0.00272
100 0.50 0.00283 125 0.40 0.00257 150 0.20 0.00431 200 0.30 0.00171
100 0.80 0.0017 125 0.60 0.00165 150 0.40 0.00194 200 0.50 0.000976
100 1.00 0.00134 125 0.80 0.00121 150 0.60 0.00125 200 0.80 0.000592
100 2.00 0.000641 125 1.00 0.000955 150 1.00 0.000726 200 1.00 0.000469
100 4.00 0.000305 125 2.00 0.000459 150 2.00 0.000349 200 2.00 0.000227
100 6.00 0.000195 125 4.00 0.00022 150 4.00 0.000168 200 4.00 0.00011
100 8.00 0.000142 125 6.00 0.000141 150 6.00 0.000108 200 6.00 0.0000711
100 10.00 0.000124 125 9.00 0.0000904 150 8.00 0.0000787 200 8.00 0.000052
100 14.00 0.000114 125 10.00 0.0000837 150 10.00 0.0000619 200 10.00 0.0000403
100 25.00 0.00011 125 12.00 0.000077 150 12.00 0.0000553 200 12.00 0.0000338
100 50.00 0.00011 125 14.00 0.000074 150 16.00 0.000051 200 14.00 0.0000309
125 20.00 0.0000713 150 20.00 0.0000498 200 16.00 0.0000295
125 40.00 0.0000704 150 40.00 0.0000489 200 20.00 0.0000283
125 50.00 0.0000704 150 50.00 0.0000489 200 40.00 0.0000275
200 50.00 0.0000275
D0/T L/D0 'A' D0/T L/D0 'A' D0/T L/D0 'A'
250 0.05 0.0129 300 0.05 0.00923 400 0.05 0.00549
250 0.06 0.00955 300 0.06 0.0069 400 0.06 0.00417
250 0.08 0.00617 300 0.08 0.00452 400 0.08 0.00278
250 0.10 0.00452 300 0.10 0.00334 400 0.10 0.00208
250 0.14 0.00293 300 0.12 0.00264 400 0.12 0.00166
250 0.20 0.00191 300 0.20 0.00143 400 0.16 0.00118
250 0.40 0.000881 300 0.40 0.000666 400 0.20 0.000914
250 0.60 0.000572 300 0.60 0.000433 400 0.40 0.000429
250 0.80 0.000422 300 0.80 0.000321 400 0.60 0.00028
250 1.00 0.000335 300 1.00 0.000254 400 0.80 0.000207
250 2.00 0.000163 300 2.00 0.000124 400 1.00 0.000165
250 4.00 0.0000789 300 4.00 0.0000602 400 2.00 0.0000808
250 6.00 0.0000513 300 6.00 0.0000393 400 4.00 0.0000393
250 8.00 0.0000377 300 8.00 0.0000287 400 6.00 0.0000257
250 10.00 0.0000293 300 10.00 0.0000225 400 8.00 0.0000189
250 12.00 0.0000238 300 14.00 0.0000156 400 10.00 0.0000148
250 14.00 0.000021 300 16.00 0.0000142 400 14.00 0.0000102
250 16.00 0.0000196 300 20.00 0.000013 400 16.00 8.82E-06
250 20.00 0.0000184 300 40.00 0.0000123
250 40.00 0.0000176 300 50.00 0.0000122
250 50.00 0.0000176 300

You might also like