MAX4238/MAX4239 Ultra-Low Offset/Drift, Low-Noise,

Precision SOT23 Amplifiers

General Description Benefits and Features

The MAX4238/MAX4239 are low-noise, low-drift, ultra- ●● DC Performance Ideal for High-Precision Sensor Interface
high precision amplifiers that offer near-zero DC offset • Ultra-Low, 0.1µV Offset Voltage
and drift through the use of patented autocorrelating • 2.0µV (max) at +25°C
zeroing techniques. This method constantly measures • 2.5µV (max) at -40°C to +85°C
and compensates the input offset, eliminating drift over • 3.5µV (max) at -40°C to +125°C
time and temperature and the effect of 1/f noise. Both • Low 10nV/°C Drift
devices feature rail-to-rail outputs, operate from a single • Low Noise: 1.5µVP-P from DC to 10Hz
2.7V to 5.5V supply, and consume only 600µA. An active- • 150dB AVOL, 140dB PSRR, 140dB CMRR
low shutdown mode decreases supply current to 0.1µA. • High Gain-Bandwidth Product
The MAX4238 is unity-gain stable with a gain-bandwidth • 1MHz (MAX4238)
product of 1MHz, while the decompensated MAX4239 • 6.5MHz (MAX4239)
is stable with AV ≥ 10V/V and a GBWP of 6.5MHz. The • Ground-Sensing Input
• Rail-to-Rail Output (RL = 1kΩ)
MAX4238/MAX4239 are available in 8-pin narrow SO,
●● Low Power Consumption Reduces System Power
6-pin TDFN and SOT23 packages.
• Single 2.7V to 5.5V Supply Voltage Range
Applications • 600µA Supply Current
• 0.1µA Shutdown Mode
●● Thermocouples
●● Low Power Consumption Reduces System Power
●● Strain Gauges
●● AEC-Q100 Qualified, Refer to Ordering Information
●● Electronic Scales
for the List of /V Parts
●● Medical Instrumentation
●● Instrumentation Amplifiers

Typical Application Circuit Ordering Information appears at end of data sheet.

5V Pin Configurations appear at end of data sheet.

18kΩ
360Ω
STRAIN GAUGE
ADC
AV = 100 AIN

18kΩ MAX4238/
MAX4239

19-2424; Rev 8; 2/18

MAX4238/MAX4239 Ultra-Low Offset/Drift, Low-Noise,
Precision SOT23 Amplifiers

Absolute Maximum Ratings

Power-Supply Voltage (VCC to GND)......................................6V Operating Temperature Range.......................... -40°C to +125°C
All Other Pins.............................(VGND - 0.3V) to (VCC + 0.3V) Junction Temperature.......................................................+150°C
Output Short-Circuit Duration Storage Temperature Range............................. -65°C to +150°C
(OUT shorted to VCC or GND)..............................Continuous Lead Temperature (soldering, 10s).................................. +300°C
Continuous Power Dissipation (TA = +70°C) Soldering Temperature (reflow)
6-Pin Plastic SOT23 Lead(Pb)-Free Packages.............................................+260°C
(derate 9.1mW/°C above +70°C).................................727mW Packages Containing Lead..........................................+240°C
8-Pin Plastic SO (derate 5.88mW/°C above +70°C)....471mW
6-Pin TDFN-EP (derate 18.2mW above +70°C)........1454mW

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these
or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.

Electrical Characteristics
(2.7V ≤ VCC ≤ 5.5V, VCM = VGND = 0V, VOUT = VCC/2, RL = 10kΩ connected to VCC/2, SHDN = VCC, TA = +25°C, unless
otherwise noted.)

PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS

Input Offset Voltage VOS (Note 1) 0.1 2 µV
Long-Term Offset Drift 50 nV/1000hr
Input Bias Current IB (Note 2) 1 pA
Input Offset Current IOS (Note 2) 2 pA
Peak-to-Peak Input Noise
enP-P RS = 100W, 0.01Hz to 10Hz 1.5 µVP-P
Voltage
Input Voltage-Noise Density en f = 1kHz 30 NV/√Hz
Common-Mode Input VGND VCC
VCM Inferred from CMRR test V
Voltage Range - 0.1 - 1.3
Common-Mode Rejection Ratio CMRR -0.1V ≤ VCM ≤ VCC - 1.3V (Note 1) 120 140 dB
Power-Supply Rejection Ratio PSRR 2.7V ≤ VCC ≤ 5.5V (Note 1) 120 140 dB
0.05V ≤ VOUT ≤ VCC - 0.05V
RL = 10kW 125 150
(Note 1)
Large-Signal Voltage Gain AVOL dB
0.1V ≤ VOUT ≤ VCC - 0.1V
RL = 1kW 125 145
(Note 1)
VCC - VOH 4 10
RL = 10kW
VOL 4 10
Output Voltage Swing VOH/VOL mV
VCC - VOH 35 50
RL = 1kW
VOL 35 50
Output Short-Circuit Current To either supply 40 mA
Output Leakage Current 0 ≤ VOUT ≤ VCC, SHDN = GND (Note 2) 0.01 1 µA

VCC = 5V, CL = 100pF, MAX4238 0.35

Slew Rate V/µs
VOUT = 2V step MAX4239 1.6

RL = 10kW, CL = 100pF, MAX4238 1

Gain-Bandwidth Product GBWP MHz
measured at f = 100kHz MAX4239 6.5

Minimum Stable Closed-Loop RL = 10kW, CL = 100pF, MAX4238 1

V/V
Gain phase margin = 60° MAX4239 10

www.maximintegrated.com Maxim Integrated │  2

MAX4238/MAX4239 Ultra-Low Offset/Drift, Low-Noise,
Precision SOT23 Amplifiers

Electrical Characteristics (continued)

(2.7V ≤ VCC ≤ 5.5V, VCM = VGND = 0V, VOUT = VCC/2, RL = 10kΩ connected to VCC/2, SHDN = VCC, TA = +25°C,
unless otherwise noted.)

PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS

RL = 10kW, CL = 100pF, MAX4238 1000

Maximum Closed-Loop Gain V/V
phase margin = 60° MAX4239 6700
0.1% (10 bit) 0.5
0.025% (12 bit) 1.0
Settling Time -1V step ms
0.006% (14 bit) 1.7
0.0015% (16 bit) 2.3
0.1% (10 bit) 3.3

AV = 10 0.025% (12 bit) 4.1

Overload Recovery Time ms
(Note 4) 0.006% (14 bit) 4.9
0.0015% (16 bit) 5.7
0.1% (10 bit) 1.8
0.025% (12 bit) 2.6
Startup Time AV = 10 ms
0.006% (14 bit) 3.4
0.0015% (16 bit) 4.3
Supply Voltage Range VCC Inferred by PSRR test 2.7 5.5 V
SHDN = VCC, no load, VCC = 5.5V 600 850
Supply Current ICC µA
SHDN = GND, VCC = 5.5V 0.1 1
Shutdown Logic-High VIH 2.2 V
Shutdown Logic-Low VIL 0.8 V
Shutdown Input Current 0V ≤ V SHDN ≤ VCC 0.1 1 µA

www.maximintegrated.com Maxim Integrated │  3

MAX4238/MAX4239 Ultra-Low Offset/Drift, Low-Noise,
Precision SOT23 Amplifiers

Electrical Characteristics
(2.7V ≤ VCC ≤ 5.5V, VCM = GND = 0V, VOUT = VCC/2, RL = 10kΩ connected to VCC/2, SHDN = VCC, TA = -40°C to +125°C, unless
otherwise noted.) (Note 5)

PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS

TA = -40°C to +85°C 2.5
Input Offset Voltage VOS (Note 1) µV
TA = -40°C to +125°C 3.5
Input Offset Drift TCVOS (Note 1) 10 nV/°C
Common-Mode Input Voltage VGND VCC
VCM Inferred from CMRR test V
Range - 0.05 - 1.4

VGND - 0.05V ≤ TA = -40°C to +85°C 115

Common-Mode Rejection Ratio CMRR VCM ≤ VCC – dB
1.4V (Note 1) TA = -40°C to +125°C 90

Power-Supply Rejection Ratio PSRR 2.7V ≤ VCC ≤ 5.5V (Note 1) 120 dB

RL = 10kW, TA = -40°C to +85°C 125

0.1V ≤ VOUT
dB
≤ VCC - 0.1V
(Note 1) TA = -40°C to +125°C 95
Large-Signal Voltage Gain AVOL
0.1V ≤ VOUT ≤ VCC - 0.1V,
120
RL = 1kW TA = -40°C to +85°C
dB
(Note 1) 0.2V ≤ VOUT ≤ VCC - 0.2V,
80
TA = -40°C to +125°C
VCC - VOH 20
RL = 10kW
VOL 20
Output Voltage Swing VOH/VOL mV
VCC - VOH 100
RL = 1kW
VOL 100
0V ≤ VOUT ≤ VCC, SHDN = GND
Output Leakage Current 2 µA
(Note 3)
Supply Voltage Range VCC Inferred by PSRR test 2.7 5.5 V
SHDN = VCC, no load, VCC = 5.5V 900
Supply Current ICC µA
SHDN = GND, VCC = 5.5V 2
Shutdown Logic-High VIH 2.2 V
Shutdown Logic-Low VIL 0.7 V
Shutdown Input Current 0V ≤ VSHDN ≤ VCC 2 µA
Note 1: Guaranteed by design. Thermocouple and leakage effects preclude measurement of this parameter during production
testing. Devices are screened during production testing to eliminate defective units.
Note 2: IN+ and IN- are gates to CMOS transistors with typical input bias current of 1pA. CMOS leakage is so small that it is
impractical to test and guarantee in production. Devices are screened during production testing to eliminate defective units.
Note 3: Leakage does not include leakage through feedback resistors.
Note 4: Overload recovery time is the time required for the device to recover from saturation when the output has been
driven to either rail.
Note 5: Specifications are 100% tested at TA = +25°C, unless otherwise noted. Limits over temperature are guaranteed by design.

www.maximintegrated.com Maxim Integrated │  4

MAX4238/MAX4239 Ultra-Low Offset/Drift, Low-Noise,
Precision SOT23 Amplifiers

Typical Operating Characteristics

(VCC = 5V, VCM = 0V, RL = 10kΩ connected to VCC/2, SHDN = VCC, TA = +25°C, unless otherwise noted.)

OFFSET VOLTAGE
INPUT OFFSET DISTRIBUTION OFFSET VOLTAGE vs. SUPPLY VOLTAGE vs. COMMON-MODE VOLTAGE
50 0.4 0.4

MAX4238/39 toc03
MAX4238/39 toc01

MAX4238/39 toc02
TA = +125°C
40 TA = +125° C
PERCENTAGE OF UNITS (%)

0.2 TA = +25° C
0.2

OFFSET VOLTAGE (µV)

OFFSET VOLTAGE (µV)

TA = -40° C
30 TA = +25°C
TA = -40°C
0 0
20

10 -0.2
-0.2

0
-1.5 -1.2 -0.9 -0.6 -0.3 0 0.3 0.6 0.9 1.2 1.5
-0.4 -0.4
OFFSET VOLTAGE (µV) 0 0.9 1.8 2.7 3.6
2.7 3.4 4.1 4.8 5.5
SUPPLY VOLTAGE (V) COMMON-MODE VOLTAGE (V)

OUTPUT HIGH VOLTAGE OUTPUT LOW VOLTAGE MAX4238

vs. OUTPUT SOURCE CURRENT vs. OUTPUT SINK CURRENT GAIN AND PHASE vs. FREQUENCY
0.30 0.35 80
MAX4238/39 toc04

MAX4238/39 toc05

MAX4238/39 toc06
VOH = VCC - VOUT 60
0.30 40
0.25
GAIN AND PHASE (dB/DEGREES)
OUTPUT HIGH VOLTAGE (V)

OUTPUT LOW VOLTAGE (V)

20
0.25 0
0.20 VCC = 2.7V
VCC = 2.7V -20
0.20
-40
0.15 VCC = 5V
0.15 -60
VCC = 5V
-80
0.10
0.10 -100
-120 VCC = 5V
0.05 GAIN = 60dB
0.05 -140
RL = 10kΩ
-160 CL = 0pF
0 0 -180
0 5 10 15 20 0 5 10 15 20 100 1k 10k 100k 1M 10M
SOURCE CURRENT (mA) SINK CURRENT (mA) FREQUENCY (Hz)

MAX4238 MAX4238 MAX4238

GAIN AND PHASE vs. FREQUENCY GAIN AND PHASE vs. FREQUENCY GAIN AND PHASE vs. FREQUENCY
80 80 80
MAX4238/39 toc07

MAX4238/39 toc08

MAX4238/39 toc09

60 60 60
40 40 40
GAIN AND PHASE (dB/DEGREES)

GAIN AND PHASE (dB/DEGREES)

GAIN AND PHASE (dB/DEGREES)

20 20 20
0 0 0
-20 -20 -20
-40 -40 -40
-60 -60 -60
-80 -80 -80
-100 -100 -100
-120 VCC = 5V -120 VCC = 5V -120 VCC = 5V
GAIN = 60dB GAIN = 40dB GAIN = 40dB
-140 -140 -140
RL = 10kΩ RL = 10kΩ RL = 10kΩ
-160 CL = 100pF -160 -160
CL = 0pF CL = 68pF
-180 -180 -180
100 1k 10k 100k 1M 10M 100 1k 10k 100k 1M 10M 100 1k 10k 100k 1M 10M
FREQUENCY (Hz) FREQUENCY (Hz) FREQUENCY (Hz)

www.maximintegrated.com Maxim Integrated │  5

MAX4238/MAX4239 Ultra-Low Offset/Drift, Low-Noise,
Precision SOT23 Amplifiers

Typical Operating Characteristics (continued)

(VCC = 5V, VCM = 0V, RL = 10kΩ connected to VCC/2, SHDN = VCC, TA = +25°C, unless otherwise noted.)

MAX4239 MAX4239
GAIN AND PHASE vs. FREQUENCY GAIN AND PHASE vs. FREQUENCY SUPPLY CURRENT vs. SUPPLY VOLTAGE
80 80 600

MAX4238/39 toc11
MAX4238/39 toc10

MAx4238/39 toc12
60 60 TA = +125°C
40 40
GAIN AND PHASE (dB/DEGREES)
GAIN AND PHASE (dB/DEGREES)

500
20 20

SUPPLY CURRENT (µA)

0 0 TA = -40°C
400
-20 -20 TA = +25°C
-40 -40
-60 -60 300
-80 -80
-100 -100 200
-120 VCC = 5V -120 VCC = 5V
GAIN = 40dB GAIN = 40dB
-140 -140 100
RL = 10kΩ RL = 10kΩ
-160 CL = 0pF -160 CL = 100pF
-180 -180 0
1E+2 1E+3 1E+4 1E+5 1E+6 1E+7 1E+2 1E+3 1E+4 1E+5 1E+6 1E+7 0 1 2 3 4 5
FREQUENCY (Hz) FREQUENCY (Hz) SUPPLY VOLTAGE (V)

POWER-SUPPLY REJECTION RATIO COMMON-MODE REJECTION RATIO MAX4238

vs. FREQUENCY vs. FREQUENCY LARGE-SIGNAL TRANSIENT RESPONSE
MAX4238/39 toc15
0 0
MAX4238/39 toc13

MAX4238/39 toc14

-20 -20
IN
-40 -40 1V/div

-60 -60
CMRR (dB)
PSRR (dB)

-80 -80

-100 -100

-120 -120 OUT

1V/div
-140 -140

-160 -160
0.01 0.1 1 10 100 1000 0.01 0.1 1 10 100 1000 10µs/div
AV = 1V/V
FREQUENCY (kHz) FREQUENCY (kHz)
RL = 2kΩ
CL = 100pF
MAX4238 MAX4239
SMALL-SIGNAL TRANSIENT RESPONSE SMALL-SIGNAL TRANSIENT RESPONSE OVERVOLTAGE RECOVERY TIME
MAX4238/39 toc16 MAX4238/39 toc17 MAX4238/39 toc18

IN
IN 50mV/div 0
50mV/div IN
50mV/div

OUT
OUT
50mV/div 1V/div
OUT
500mV/div
0

10µs/div 10µs/div 400µs/div

AV = 1V/V AV = 10V/V AV = 100V/V
RL = 2kΩ RL = 2kΩ RL = 10kΩ
CL = 100pF CL = 100pF VCC = 2.5V
VEE = -2.5V

www.maximintegrated.com Maxim Integrated │  6

MAX4238/MAX4239 Ultra-Low Offset/Drift, Low-Noise,
Precision SOT23 Amplifiers

Typical Operating Characteristics (continued)

(VCC = 5V, VCM = 0V, RL = 10kΩ connected to VCC/2, SHDN = VCC, TA = +25°C, unless otherwise noted.)

DC TO 10Hz NOISE EMIRR vs. FREQUENCY

MAX4238/39 toc19
140

MAX4238/39 toc21
VCC = 5V, RFIN = 16dBm
120

100

EMIRR (dB)
80
OUT 0.6µV/div
60

40

20

0
1s/div 10 100 1000
VCC = 2.5V FREQUENCY (MHz)
VEE = -2.5V

Offset Error Sources

Pin Description To achieve very low offset, several sources of error common
PIN to autozero-type amplifiers need to be considered. The
NAME FUNCTION first contributor is the settling of the sampling capacitor.
TDFN SOT23 SO
This type of error is independent of input-source impedance,
1 1 6 OUT Amplifier Output
or the size of the external gain-setting resistors. Maxim
2 2 4 GND Ground uses a patented design technique to avoid large changes
3 3 3 IN+ Noninverting Input in the voltage on the sampling capacitor to reduce settling
4 4 2 IN- Inverting Input
time errors.

Shutdown Input. Active-low The second error contributor, which is present in both
5 5 1 SHDN shutdown, connect to VCC
autozero and chopper-type amplifiers, is the charge injection
from the switches. The charge injection appears as current
for normal operation.
spikes at the input, and combined with the impedance
6 6 7 VCC Positive Power Supply seen at the amplifier’s input, contributes to input offset
No Connection. Not voltage. Minimize this feedthrough by reducing the size of
— — 5, 8 N.C.
internally connected. the gain-setting resistors and the input-source impedance.
Exposed Pad (TDFN only). A capacitor in parallel with the feedback resistor reduces
— — — EP the amount of clock feedthrough to the output by limiting
Connect EP to GND.
the closed-loop bandwidth of the device.
Detailed Description The design of the MAX4238/MAX4239 minimizes the
The MAX4238/MAX4239 are high-precision amplifiers effects of settling and charge injection to allow specification
that have less than 2.5µV of input-referred offset and low of an input offset voltage of 0.1µV (typ) and less than
1/f noise. These characteristics are achieved through a 2.5µV over temperature (-40°C to +85°C).
patented autozeroing technique that samples and cancels 1/f Noise
the input offset and noise of the amplifier. The pseudorandom
1/f noise, inherent in all semiconductor devices, is inversely
clock frequency varies from 10kHz to 15kHz, reducing
proportional to frequency. 1/f noise increases 3dB/octave
intermodulation distortion present in chopper-stabilized
and dominates amplifier noise at lower frequencies. This
amplifiers.
noise appears as a constantly changing voltage in series
with any signal being measured. The MAX4238/MAX4239
treat 1/f noise as a slow varying offset error, inherently
canceling the 1/f noise.

www.maximintegrated.com Maxim Integrated │  7

MAX4238/MAX4239 Ultra-Low Offset/Drift, Low-Noise,
Precision SOT23 Amplifiers

Output Overload Recovery Pin Configurations

Autozeroing amplifiers typically require a substantial amount
of time to recover from an output overload. This is due to the TOP VIEW

SHDN
time it takes for the null amplifier to correct the main amplifier

VCC

IN-
to a valid output. The MAX4238/MAX4239 require only 6 5 4

3.3ms to recover from an output overload (see Electrical

EP*
Characteristics and Typical Operating Characteristics).
MAX4238/
Shutdown MAX4239
The MAX4238/MAX4239 feature a low-power (0.1µA)
shutdown mode. When SHDN is pulled low, the clock
stops and the device output enters a high-impedance + 1 2 3
state. Connect SHDN to VCC for normal operation.

OUT

GND

IN+
Applications Information TDFN
(3mm x 3mm x 0.8mm)

Minimum and Maximum Gain Configurations *CONNECT EP TO GND.

The MAX4238 is a unity-gain stable amplifier with a

gain-bandwidth product (GBWP) of 1MHz. The MAX4239
is decompensated for a GBWP of 6.5MHz and is stable MAX4238/ MAX4238/
MAX4239 MAX4239
with a gain of 10V/V. Unlike conventional operational
amplifiers, the MAX4238/MAX4239 have a maximum
SHDN 1 8 N.C. OUT 1 6 VCC
gain specification. To maintain stability, set the gain of the
MAX4238 between AV = 1000V/V to 1V/V, and set the IN- 2 7 VCC
GND 2 5 SHDN
gain of the MAX4239 between AV = 6700V/V and 10V/V. IN+ 3 6 OUT

ADC Buffer Amplifier GND 4 5 N.C.

IN+ 3 4 IN-
The low offset, fast settling time, and 1/f noise cancellation
SO
of the MAX4238/MAX4239 make these devices ideal for SOT23
ADC buffers. The MAX4238/MAX4239 are well suited
for low-speed, high-accuracy applications, such as strain
gauges (see Typical Application Circuit).
Error Budget Example
When using the MAX4238/MAX4239 as an ADC buffer,
the temperature drift should be taken into account when
determining the maximum input signal. With a typical offset
drift of 10nV/°C, the drift over a 10°C range is 100nV.
Setting this equal to 1/2LSB in a 16-bit system yields a
full-scale range of 13mV. With a single 2.7V supply, an
acceptable closed-loop gain is AV = 200. This provides
sufficient gain while maintaining headroom.

www.maximintegrated.com Maxim Integrated │  8

MAX4238/MAX4239 Ultra-Low Offset/Drift, Low-Noise,
Precision SOT23 Amplifiers

Ordering Information Package Information

PART PIN-PACKAGE TOP MARK For the latest package outline information and land patterns
(footprints), go to www.maximintegrated.com/packages. Note
MAX4238AUT-T 6 SOT23 AAZZ
that a “+”, “#”, or “-” in the package code indicates RoHS status
MAX4238AUT/V+T 6 SOT23 — only. Package drawings may show a different suffix character, but
MAX4238ASA 8 SO — the drawing pertains to the package regardles of RoHS status.
MAX4238ATT+T 6 TDFN-EP* +ANG
PACKAGE PACKAGE OUTLINE LAND
MAX4239AUT-T 6 SOT23 ABAA TYPE CODE NO. PATTERN NO.
MAX4239AUT/V+T 6 SOT23 —
6 SOT23 U6F-6 21-0058 90-0175
MAX4239ASA 8 SO —
8 SO S8-4 21-0041 90-0096
MAX4239ATT+T 6 TDFN-EP* +ANH
Note: All devices are specified over the -40°C to +125°C oper- 6 TDFN-EP T633+2 21-0137 90-0058
ating temperature range.
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed paddle.
/V denotes an automotive-qualified part. Chip Information
PROCESS: BiCMOS

Selector Guide
GAIN
MINIMUM STABLE
PART BANDWIDTH
GAIN
(MHz)
MAX4238 1V/V 1
MAX4239 10V/V 6.5

www.maximintegrated.com Maxim Integrated │  9

MAX4238/MAX4239 Ultra-Low Offset/Drift, Low-Noise,
Precision SOT23 Amplifiers

Revision History
REVISION REVISION PAGES
DESCRIPTION
NUMBER DATE CHANGED
2 5/06 — —
3 8/11 Added MAX4238 and MAX4239 automotive-qualified parts 1
4 1/14 Updated the Typical Operating Characteristics 7
5 5/15 Added the Benefits and Features section 1
6 9/15 Deleted duplicate graph and updated scale 7
7 7/17 Correcting scale on TOC15–TOC18 x-axes 6
8 2/18 Added AEC qualification statement to Benefits and Features section 1

For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.

Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses
are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits)
shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.

Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. © 2018 Maxim Integrated Products, Inc. │  10