1st Year Syllabus
1st Year Syllabus
1st Year Syllabus
TECHNOLOGY, ODISHA
1
First Year B.Tech Syllabus As Per AICTE Model Curriculum.
Semester
Category Total
1st 2nd 3rd 4th 5th 6th 7th 8th
HS/MS
Humanities and Social Sciences 3 3 3 3 12
Including Management Courses
BS (Basic Science Courses) 9 9 3 21
ES(Engineering Science
6 14 5 25
Courses)
MC (Mandatory Courses) 0 0 0 0 0 0 0
Total 18 23 22 21 22 22 17 15 160
2
Course Structure for First Year Engineering
First Semester
Theory
Course University Internal
Category Course Title L-T-P Credit
Code Marks Evaluation
BS RMA1A001 Mathematics –I 3-0-0 3 100 50
RPH1A001/ 100 50
BS Physics/Chemistry 3-0-0 3
RCH1A002
Basic Electrical 100 50
RBE1B001/ Engineering /Basic
ES 2-0-0 2
RBL1B002 Electronics
Engineering
Basic Mechanical 100 50
RBM1B001/ Engineering
ES 2-0-0 2
RBC1B002 / Basic Civil
Engineering
Communicative 100 50
HS RCE1E001 2-0-0 2
English
Induction Training
MC RIT1F301 0
(21 Days)
Total Credit (Theory) 12
Total Marks 500 250
Practical
RPH1A201/ Physics 100
BS 0-0-3 1 -
RCH1A202 Lab/Chemistry Lab
Basic Electrical 100
RBE1B201/ Engineering /
ES 0-0-3 1 -
RBL1B202 Basic Electronics
Engineering Lab
Basic Mechanical 100
RBM1B201/ Engineering /
ES 0-0-3 1 -
RBC1B202 Basic Civil
Engineering Lab
Engineering 100
REG1B201/
ES Graphics & Design 0-0-3 2 -
RWO1B202
Lab/Workshop
English Language 100
HS RCE1E201 0-0-3 1
Lab
6
Total Credit (Practical)
500
Total Marks
Grand Total
(Theory & Practical)=
1250
3
Second Semester
Theory
Course University Internal
Category Course Title L-T-P Credit
Code Marks Evaluation
BS RMA2A001 Mathematics-II 3-0-0 3 100 50
Engineering 50
ES REM2B001 3-0-0 3 100
Mechanics
RPH2A001/ 50
BS Physics / Chemistry 3-0-0 3 100
RCH2A002
Basic Electrical 50
RBE2B001/ Engineering /Basic
ES Electronics 2-0-0 2 100
RBL2B002
Engineering
RBM2B001 Basic Mechanical 50
ES / Engineering / Basic 2-0-0 2 100
RBC2B002 Civil Engineering
Programming 50
ES RPL2B001 3-0-0 3 100
for Problem
Solving using
C
MC RNC2F301 NCC/NSS/Yoga 0
Total Credit (Theory) 16
Total Marks 600 300
Practical
RPH2A201/ Physics 100
BS 0-0-3 1
RCH2A202 Lab/Chemistry Lab
Basic Electrical 100
RBE2B201/ Engineering / Basic
ES 0-0-3 1
RBL2B202 Electronics
Engineering Lab
Basic Mechanical 100
RBM2B201/
ES Engineering / Basic 1
RBC2B202
Civil Engineering Lab
Engineering Graphics 100
REG2B201/ &
ES 0-0-3 2
RWO2B202 Design
Lab/Workshop
ES RPL2B201 Programming for 0-0-3 2
100
Problem Solving using
C Lab
Total Credit (Practical) 7
Total Marks (Practical) 500
Grand Total
(Theory & Practical) = 1400
Total Semester Credit 23
Total First Year Credit 41
4
RMA1A001 Mathematics-I 3-0-0
OBJECTIVE:
The objective of the course Mathematics-I is to familiarize the prospective engineers with
techniques in calculus, Gamma & Bita function, differential equation of first and second order,
series solution of differential equations, Laplace transform. It aims to equip the students with
standard concepts and tools at an intermediate to advanced level that will serve them well
towards tackling more advanced level of mathematics and applications that they would find
useful in their disciplines.
Module-1 (8 hrs.)
Asymptote, Curvature (Cartesian and polar), Gamma & Beta function , Partial differentiation,
Maxima and Minima for function of two variables.
Module-2 (8 hrs.)
Differential Equation: First order differential equations, Separable Equation, Exact differential
equation, Linear differential equation, Bernoulli’s equation application to Electrical circuits.
Module-3 (9hrs.)
Laplace transformation and its use in getting solution to differential equations, Convolution,
Integral Equations.
OUTCOMES
Apply the knowledge of calculus, Gamma & Beta functions for analyzing engineering
problems.
Solve first order differential equation analytically using standard method.
Demonstrate various physical models through higher order differential equation and
solve such linear ordinary differential equation.
Obtain series solution of differential equation and explain application of Bessel’sfunction.
Apply Laplace problem to determine complete solution to ordinary differential equation.
5
Text Books:
References:
1. Ordinary and Partial Differential equations by J. Sihna Ray and S Padhy, Kalyani
Publishers
N.B:Thecourseisof3creditwith4contacthours.
6
PHYSICS 3-0-0
For 1st Semester Code (RPH1A001)
For 2nd Semester Code (RPH2A001)
Module I
Oscillation & Amp; Waves (8 Hours)
Simple Harmonic Oscillation: velocity of motion, acceleration, time period, frequency, phase;
damped harmonic oscillation: Wave equation of damped vibration, logarithmic decrement,
quality factor, relaxation time; Forced oscillation, resonance, velocity resonance and amplitude
resonance, coupled oscillation, Normal coordinates and normal frequencies, In- phase and
out-of-Phase Oscillation, Concept of wave and wave equation,, reflection and transmission of
longitudinal waves at boundaries.
Module II
OPTICS (10 Hours)
Concept of interference, two sources interference pattern, Bi-prism, Fringe width, uses of
biprism, Newton’s ring & measurement of wavelength and refractive index. Diffraction:
Huygen’s principle, Fresnel’s Diffraction and Fraunhoffer’s diffraction, Half period zone, Zone
plate, construction, principle, multiple foci, comparison ofzone plate with convex lens,
Fraunhoper’s diffraction of Single slit, intensity distribution
Module III
LASER and Fibre Optics :( 6 Hours)
Atomic excitation and energy states, Interaction of external energy with atomic energy states,
Absorption, spontaneous emission and stimulated emission, Population inversion, Pumping
mechanism, optical pumping, Electrical Pumping, Components of laser system, active
medium, population inversion, Ruby laser, Helium-Neon laser, Semiconductor laser (basic
concepts, and Engineering application only),Structure of optical fibre, Principle of propagation
and numerical aperture, Acceptance angle, classification of optical fibre (Single mode and
Multimode, SINand GRIN), FOCL (Fiber Optic Communication Link)
Solid State Physics ( 4 Hours )
Crystalline and Amorphous solid, unit cell, lattice parameter, Miller Indices, Reciprocal
Lattice(Only Concept), Bragg’s law, Concept of fermions and Bosons and their distribution
Functions, Band theory of Solids(Qualitative),Classification of materials: metals,
semiconductor and insulator in terms of band theory.
Module IV
Electromagnetism (8 Hours)
(Student will be familiarized with some basic used in vector calculus prior to Development of
Maxwell’s electromagnetic wave equations. No proof of theorems and laws included in this
unit expected- statement and interpretation should sufficient.)
Introduction; Scalar & vector fields, Gradient Of Scalar Field, divergence and curl of
Vector Field, Gauss divergence theorem, Stokes theorem (Only Statements, noproof),
Gauss’s law of electrostatics in free space and in a medium (Onlystatements), Faraday’s law
of electromagnetic induction (Only statements)Displacement current, Ampere’s circuital law,
Maxwell’s equation in Differential andIntegral form, Electromagnetic wave equation in E and,
Electromagnetic Energy,Poynting theorem and Poynting vector(no derivation)
Module V
Quantum Physics: (10 Hours)
Elementary concepts of quantum physics formulation to deal with physical systems.
Need for Quantum physics- historical overviews (For concept), Einstein equation, de
7
Broglie Hypothesis of matter waves, Compton Scattering, Pair production (no derivation),
Uncertainty Principle, Application of Uncertainty Principle, Non-existence of electrons in the
Nucleus, Ground state energy of a harmonic oscillator.Basic Features of Quantum Mechanics:
Transition from deterministic to Probabilistic,Wave function, probability density, Normalization
of wave function (Simple problem),observables and operators, expectation values (Simple
problem), Schrodingerequation-Time dependent and time independent equation Application:
Free Particle and Particle in a box
Books:
1. Engineering Physics by D.R. Joshi, Mc Graw Hill
2. Principle of Physics Vol. I & Vol. II by Md. M. Khan & S. Panigrahi(Cambridge
Univ. Press).
3. Lectures on Engineering Physics byL. Maharana, Prafulla ku. Panda, Sarat Ku. Dash,
Babita Ojha (Pearson)
4. Engineering Physics by D.K. Bhattacharrya and Poom Tondon , Oxford University Press
Reference Books:
1. Optics - A. K. Ghatak
2. Introduction to Electrodynamics - David J. Griffiths, PHI Publication
3. Concepts of Modern Physics – Arthur Beiser.
4. Physics-I for engineering degree students - B.B. Swain and P.K.Jena.
8
CHEMISTRY 3-0-0
For 1st Semester Code (RCH1A002)
For 2nd Semester Code (RCH2A002)
Course Objectives:
(1) To understand the basics of quantum mechanical concepts and spectroscopy.
(2) To predict the bulk properties and processes using thermodynamic considerations.
(3) To learn an introductory idea about new materials.
(4) To understand the fundamental concepts on fuels and corrosion chemistry.
Module I: [10Classes]
The phase rule: Statement of Gibb’s phase rule and explanation of the terms involved, Phase
diagram of one component system – water and sulfur system, Condensed phase rule, Phase
diagram of two component system – Eutectic Bi-Cd, Pb-Tin system &Isomorphous System.
Fuels: Classification of fuels, calorific value. (Determination by Dulong’s formula), G.C.V. and
N.C.V., Solid fuels, Analysis of coal. Liquid fuels: Classification of petroleum, Refining of
petroleum, Cracking, Knocking and anti knocking, cetane and octane numbers. Unleaded
petrol, synthetic petrol, power alcohol. Gaseous Fuel: Producer gas, Water gas, LPG, CNG,
Kerosene gas, Combustion calculation.
New Materials: Introduction to nanomaterials, classification (0D, 1D, 2D) with examples, size
dependent properties, Top-down and Bottom-up approaches of nanomaterial synthesis.
Introductory idea on synthesis of nanomaterials via green synthetic route. Application of
nanomaterials in environmental fields and electronic devices.
9
Text Books:
1. Engineering Chemistry (NPTEL web-book) by B. L. Tembe, Kamaludddin and M. S.
Krishan.
2. Text Book in Applied Chemistry by A. N. Acharya and B. Samantaray, Pearson India.
3. Fundamentals of Molecular Spectroscopy by Banwell, Tata McGraw Hill Education.
4. Textbook of nanoscience and Nanotechnology, McGraw Hill Education (India) Pvt.
Ltd., 2012.
5. Advanced Engineering Chemistry by M. R. Senapati, University Science Press,
India..
6. Engineering Chemistry, Jain and Jain, DhanpatRai Publication.
Reference Books:
1. Inorganic Chemistry by Donald A. Tarr, Gary Miessler, Pearson India, Third Edition.
2. Quantum Chemistry by Ira N. Levine, Pearson 7th Edition.
3. Molecular Spectroscopy, Ira N. Levine, John Wiley and Sons
4. Modern Spectroscopy – A Molecular Approach, by Donald McQuarrie and John
Simon, published by University Science Books.
7. Inorganic Chemistry by W. Overton, Rounk and Armstrong, Oxford Univesity Press,
6th edition.
8. Introductory to Quantum Chemistry by A. K. Chandra. , 4th Edition, Mcgraw Hill
Education.
Course Outcomes:
1. Understand the basics of quantum mechanical concepts and spectroscopy.
2. Rationalise bulk properties and processes using thermodynamic considerations.
3. Preliminary understanding on introductory idea about nano materials.
4. Analyse the quantitative aspects of fuel combustion and the mechanism of corrosion.
10
Basic Electrical Engineering 2-0-0
For 1st Semester Code (RBE1B001)
For 2nd Semester Code (RBE2B001)
Module 1:
DC & AC Circuits (6 hours)
Circuit laws: Fundamentals of electrical circuit, Ohm’s law, Kirchoff’s laws, series and parallel
connections, analysis of circuits using Node voltage, mesh current, superposition, Thevenin
and Norton Theorems to solve simple circuits with dc excitation. Single phase circuit: Single
phase emf generation, Representation of sinusoidal waveforms, average, effective, peak and
rms values, j operator, Rectangular and polar representation of phasors, real power, reactive
power, apparent power, power factor. Analysis of single-phase ac circuits consisting of R, L,
C, RL, RC, RLC combinations (series and parallel).
Module 2:
Three Phase Circuits (5 hours)
Three phase circuit: Three phase emf generation, Delta-star and star-delta conversions,
voltage and current relations in star and delta connections. solution of the three phase circuits
with balanced voltage and balanced load conditions, phasor diagram, measurement of power
in three phase circuits.
Module 3:
Magnetic Circuits (5 hours)
Magnetic Circuits: MMF, flux, reluctance, inductance. Review of Ampere Law, Biot Savart Law.
Magnetic field, BH characteristics and Hysteresis loss, Series and parallel magnetic circuits.
Module 4:
Electrical Machines (6 hours)
Transformers (Single Phase): Construction, operation, Phasor diagram and performance
testing. Induction Motors (Three Phase): Basic Principles, Rotating Magnetic Field, Equivalent
circuit, Phasor diagram, Torque-Speed Characteristics Basics of DC machines: EMF
Equation, Torque Equation, Methods of Excitation
Text / References:
1. E. Hughes, “Electrical and Electronics Technology”, Pearson, 2010
2. L. S. Bobrow, “Fundamentals of Electrical Engineering”, Oxford UniversityPress, 2011.
3. V. D. Toro, “Electrical Engineering Fundamentals”, Prentice Hall India, 1989.
4.D.C.Kulshreshtha,“BasicElectricalEngineering”,McGrawHill,2009.
11
Basic Electronics Engineering 2-0-0
For 1st Semester Code (RBL1B002)
For 2nd Semester Code (RBL2B002)
Module 01 : (6Hours)
Module 02 : ( 6 Hours)
Operational Amplifiers: The Ideal Op Amp, Inverting and Non – Inverting configurations,
Equivalent Circuit model, Op amp application in Integration,
Differentiation and Summing Circuits.
Module 04 : (5 Hours)
Digital Electronic Principles: Introduction, Binary digits, Logic levels and Digital
waveforms, Introduction to basic Logic operation, Number system, Decimal
numbers, Binary numbers, Decimal-to-Binary conversion, Simple binary arithmetic,
Logic Gates, Boolean algebra and Combinational Logic Circuits: The inverter, The
AND, OR, NAND NOR, Exclusive-OR and Exclusive-NOR gate, Boolean operations
and expressions, Laws and Rules of Boolean algebra, De Morgan’s theorem, Boolean
analysis of logic circuits, Standard forms of Boolean expressions, Boolean
expression and truth table. Basic combinational logic circuits, Implementation of
combinational logic, the universal properties of NAND and NOR gates, Basic adders.
Text book:
1. Electronic Devices Circuit Theory - by Rober L. Boylestad 11th Edition, Pearson
Publication, 2014
2. Microelectronic Circuits by A. S. Sedra and Kenneth C. Smith 7th Edition, Oxford
University Press. 2017
3. Digital Design by M. Morris Mano, 5th Edition, Pearson Publication, 2016.
12
BASIC MECHANICAL ENGINEERING 2-0-0
For 1st Semester Code (RBM1B001)
For 2nd Semester Code (RBM2B001)
MODULE-I (8 classes)
Thermodynamics:
Systems, Properties, Process, State, Cycle, Internal energy, Enthalpy, Zeroth Law, First law
and Second Law of Thermodynamics, Basic Concept of Entropy, Properties of ideal gas.,
Properties of pure substances, Steam formation, Types of Steam, Enthalpy, Specific volume,
Internal energy and dryness fraction of steam, use of Steam tables. Related numericals.
MODULE-II (6 classes)
Application of Thermodynamics:
Air compressors, Steam Power Plant, Refrigerators and Heat pump, I.C. Engines (Brief
Description of different components of above mentioned systems and working principles with
Schematic diagram only)
MODULE-III (5 Classes)
Introduction to Robotics:
Robot anatomy, joints and links and common robot configurations
MODULE-IV (5 Classes)
Mechanical Measurements:
Temperature, pressure, velocity, flow, strain, force, torque measurements. (Working principle
only).
Text books
i. Basic Mechanical Engineering by Pravin Kumar, Pearson
ii. Basic Mechanical Engineering by A R Israni, P K Shah, BS Publications
iii. Text book of Elements of Mechanical Engineering, S T Murthy, Universities press
iv. Basic and applied Thermodynamics by P. K. Nag, Tata McGraw Hill
Reference books
i. Basic Mechanical Engineering by .D. Mishra, P.K Parida, S.S.Sahoo, India Tech
Publishing company
ii. Elements of Mechanical Engineering by J K Kittur and G D Gokak,Willey
iii. Basic Mechanical Engineering by BasantAgrawal, C M Agrawal,Willey
iv. Engineering Thermodynamics by P. Chattopadhaya, Oxford University Press
13
BASIC CIVIL ENGINEERING 2-0-0
For 1st Semester Code (RBC1B002)
For 2nd Semester Code (RBC2B002)
MODULE-I (6 classes)
Introduction and Scope of Civil Engineering. Broad disciplines of Civil Engineering; Importance
of Civil Engineering, Early constructions and developments over time, Development of various
materials of construction and methods of construction.
Bricks: Brick as a construction material and its importance, qualities of a good brick, Stone:
classification, composition and characteristics, Cement: Classification, tests for cement, uses
of cement, types of cement, Concrete: Quality of mixing water, Workability, Compaction of
concrete, concrete mix design, Grade and strength of Concrete. Fundamentals of R.C.C. and
Prestressed concrete. Types of steels used in civil engineering works.
Building Components and their basic requirements, Mortar, Stone masonry, brick masonry,
roof, floors.
MODULE-II (6 classes)
Surveying: Linear measurement and chain survey: Use of chains and tapes for measurement
of correct length of lines, direct and indirect ranging,Compass surveying: Use of prismatic
compass, bearing of a line. Local attraction, Introduction to modern surveying instruments
EDM and Total Station.
MODULE-III (6 classes)
Fundamental of soil and its classification, Foundations: Types of shallow and deep foundations
with neat sketches. Fundamentals of Irrigation Engineering. Introduction of Hydraulics
structure like canals, siphons, weirs, dams etc.
MODULE-IV (6 classes)
Transport, Traffic and Urban Engineering: Introduction to planning and design aspects of
transportation engineering, different modes of transport, highway engineering, rail
engineering, airport engineering, traffic engineering, urban engineering
TEXT BOOKS
i. Basic Civil Engineering, S. Gopi, Pearson
ii. Building Construction, Sushil Kumar, Standard Publishers Distributors
iii. Surveying and Levelling by R. Subramanian, Oxford University Press
REFERENCE BOOKS
i. Engineering Materials, S.C. Rangwala, Charotar Publishing House
ii. Building Material and Construction, G C Sahu, Joygopal Jena, McGrow Hill
iii. Surveying Vol-1 by R Agor, Khanna Publishers
iv. Basic Civil Engineering, M.S. Palanichamy, McGraw Hill
14
RCE1E001 Communicative English 2-0-0
Course Objectives:
To enhance the Listening, Speaking, Reading and Writing skills of the
students.
To make the students Industry-ready.
Module 1
Introduction to communication (6 hours)
The importance of communication through English at the present time; the process of
communication and factors that influence communication : sender, receiver, channel,
code, topic, message, context, feedback, ‘noise’, filters and barriers; the importance of
audience and purpose
Verbal and non-verbal communication
Listening Skills: Importance and types of Listening
Identifying and rectifying common errors: Subject-verb agreement,
Noun/ Pronoun/ Articles/ Prepositions Usage, Word choice
Vocabulary Building
Module 2
The sounds of English (6 hours)
The International Phonetic Alphabet (IPA); Vowels, diphthongs,consonants,
consonant clusters; phonemic transcription;
Syllable division and word stress; sentence rhythm and weak forms, contrastive stress
Intonation: falling, rising and falling-rising tunes
Problem sounds in cultural contexts (Indian context)
Module 3
Workplace Communication (6 hours)
Communication challenges in culturally diverse workforce; Ethics in Communication
Bias-free communication
3.2 Effective Business Presentations: Importance in workplace communication; Planning,
Preparing, Organizing, Rehearsing, and Delivering Oral presentations, Handling
Questions; Power Point Presentation
Module 4
Writing at Work (6 hours)
Business letters
Writing notices, circulars, emails.
Writing reports and Proposals
Writing CVs (for Technical Positions and Internships)
Module 5
5. Soft Skills/Life Skills (8 hours)
Body Language
Connected Speech (Intonation in Everyday Speaking and Conversation)
15
Types of interviews, Planning and Preparing for a Job Interview; Stages of an
Interview; Mastering the art of giving interviews.
Team Management and Leadership Skills; Group Discussion; Public Speaking
(Reference: Martin Luther King: I have a Dream, Vivekananda: Chicago Address, Toni
Morrison: Noble Prize Acceptance Speech)
Recommended Books:
1. Business Communication by Carol M Lehman, Debbie D Dufrene and Mala Sinha.
Cengage Learning. 2nd Edition.
2. English Grammar in Use. Raymond Murphy. Cambridge UP. 4 th Edition.
3. A Textbook of English Phonetics for Indian Students by T. Balasubramanian
[MACMILLAN]
4. Soft Skills: Key to Success in Workplace and Life by Meenakshi Raman and Shalini
Upadhyay. Cengage Learning. 2018 Edition.
Reference Books:
1. Technical Communication, Principle and Practice by Meenakshi Raman & Sangeeta
Sharma, Oxford University Press
2. Business Communication Today by Courtland L Bovee and Thill, Pearson.
3. Communication skill by Sanjay Kumar & Puspa Lata, Oxford University Press. 2nd Edition.
4. Body Language. Allan Pease. Free on Googlebooks.
5. Business and Managerial Communication, Sengupta, PHI
6. Business Communication for Managers, P. Mehra, Pearson
16
Physics Laboratory 0-0-3
For 1st Semester Code (RPH1A201)
For 2nd Semester Code (RPH2A201)
A student is expected to perform ten experiments form the list given below.
Books:
17
CHEMISTRY LAB 0-0-3
For 1st Semester Code (RCH1A202)
For 2nd Semester Code (RCH2A202)
1. Preparation of Polymer/drug.
2. Determination of cell constant and conductance of solutions.
3. Determination of partition coefficients of iodine between benzene and water.
4. Determination of rate constant of acid catalysed hydrolysis reaction.
5. Determination of dissolved oxygen in a sample of water.
6. Determination of Viscosity of a lubricating oil by Red Wood Viscometer.
7. Determination of Flash point of a given oil by Pensky-Marten’s flash pointapproach.
8. Colligative properties using freezing point depression.
9. Proximate analysis of coal.
10. Determination of percentage of available chlorine in a sample of bleaching powder.
11. Estimation of calcium in limestone.
12. Acid-Base Titration by Potentiometry.
13. Determination of total hardness of water by EDTA method.
14. Determination of amount of sodium hydroxide and sodium carbonate in a mixture.
15. Standardization of KMnO4 using sodium oxalate. Determination of ferrous iron in
Mohr’s salt by potassium permanganate.
16. Preparation of colloidal/nano particle solutions.
18
Basic Electrical Engineering Lab 0-0-3
For 1st Semester Code (RBE1B201)
For 2nd Semester Code (RBE2B201)
List of Experiment under Basic Electrical Engineering Lab:
1. Power and phase measurements in three phase system by two wattmeter method
2. Verification of super position, Thevenin and Norton’s theorem
3. Plotting of B-H curve of magnetic material and calculation of hysteresis loss
4. Series RLC circuit (Power measurement, Phasor diagram)
5. OC and SC test of 1-phase transformer.
6. Study of House wiring.
(Minimum 5 experiments/studies)
1. Model study of Steam Power Plant
2. Model study of Two stroke and Four stroke I.C. Engine
3. Model study of Refrigerator & Air conditioners
4. Model study of Automobile Parts
5. Determination of velocity ratio of belt drive
6. Study of Gears and Gear trains
7. Verification of Bernoulli’s Theorem and its application to Venturimeter.
8. Calibration of Bourdon Tube Pressure gauge and measurement of pressure using
manometers
19
BASIC CIVIL ENGINEERING LAB 0-0-3
For 1st Semester Code (RBC1B202)
For 2nd Semester Code (RBC2B202)
(Minimum 5 experiments/studies)
1. Shape and size test of brick
2. Compressive strength of brick
3. Testing of chain and measurement of correct length of the line
4. Bearing of a line
5. Study of Total Station
6. Setting time of cement
7. Tensile strength of reinforcing steel
8. Compressive strength of concrete
Introduction: Drawing Instruments and their uses, BIS conventions, Lettering, Dimensioning
line Conventions
AUTO CAD: layout of the software, standard tool bar/menus and description of most
commonly used toolbars, navigational tools. Co-ordinate system and reference planes.
Definitions of HP, VP, RPP &LPP. Creation of 2D/3D environment. Selection of drawing size
and scale. Commands and creation of Lines, Co-ordinate points, axes, poly-lines, square,
rectangle, polygons, splines, circles, ellipse, text, move, copy, off-set, mirror, rotate, trim,
extend, break, chamfer, fillet, curves, constraints. 2 – Sheets
Orthographic Projections:
Introduction, Definitions - Planes of projection, reference line and conventions employed,
Projections of points in all the four quadrants, Projections of straight lines (located in First
quadrant/first angle only),True and apparent lengths, True and apparent inclinations to
reference planes. 2 – Sheets
Orthographic Projections of Plane Surfaces (First Angle Projection Only):
Introduction, Definitions–projections of plane surfaces–triangle, square, rectangle, rhombus,
pentagon, hexagon and circle, planes in different positions by change of position method only
1-Sheet
Projections of Solids (First Angle Projection Only):
Introduction, Definitions – Projections of right regular tetrahedron, hexahedron (cube),
prisms, pyramids, cylinders and cones in different positions. 2-Sheets
Sections and Development of Lateral Surfaces of Solids
Introduction, Section planes, Sections, Section views, Sectional views, Apparent shapes and
True shapes of Sections of right regular prisms, pyramids, cylinders and cones resting with
base on HP. 2 – Sheet
Isometric Projection (Using Isometric Scale Only):
20
Introduction, Isometric scale, Isometric projection of simple plane figures, Isometric
projection of
tetrahedron, hexahedron(cube), right regular prisms, pyramids, cylinders, cones, spheres,
cut spheres. 2-Sheets
Text Books:
i. Engineering Drawing - N.D. Bhatt & V.M. Panchal, Charotar Publishing House,
Gujarat.
ii. Computer Aided Engineering Drawing - S. Trymbaka Murthy, 4th Ed, University
Press
iii. Engineering Drawing by N.S. Parthasarathy and Vela Murali Oxford University Press
Reference Books
i. Engineering Graphics - K.R. Gopalakrishna, Subash Publishers Bangalore.
ii. Fundamentals of Engineering Drawing with an Introduction to Interactive Computer
Graphics for Design and Production-Luzadder Warren J., Duff John M., Eastern
Economy Edition, Prentice-Hall of India Pvt. Ltd., New Delhi.
iii. Computer Aided Engineering drawing, Prof. M. H. Annaiah, New Age International
Publisher, New Delhi
Fitting Practice:
Use of hand tools in fitting, preparing a male and female joint of M.S. or making a paper
weight of M.S.
Welding Practice (Basic Theory to be explained prior to practice):
Gas Welding & Electric Arc welding Practice.
A joint such as a Lap joint, a T-joint or a Butt joint is to be prepared or to make furniture.
Machining (Basic Theory to be explained prior to practice):
(i) Stepped cylindrical Turning of a job and Thread-cutting in lathe.
(ii) Shaping
(iii) Milling
21
Practicing sounds of English (1 Hr)
Extempore (1 Hr)
Presentations (2 Hr)
Recommended Books:
1. English for Technical Communication by N P Sudharshana & C Savitha Cambridge
University Press, 1st edition, 2018.
2. Communication Skills A Workbook by Sanjay Kumar & Pushp Lata, Oxford
Publication.
3. English Language Communication Skills : Lab Manual cum Workbook by Rajesh Kumar,
Cengage Learning, Ist edition, 2014.
22
RMA2A001 Mathematics-II 3-0-0
OBJECTIVE:
The objective of the course Mathematics-II is to familiarize the prospective engineers with
techniques in Matrix algebra, Vector differential calculus, Vector integral calculus, Fourier
series, Fourier transform, Fourier integral. It aims to equip the students with standard concepts
and tools at an intermediate to advanced level that will serve them well towards tackling more
advanced level of mathematics and applications that they would find useful in their disciplines.
Module-1 (8 hrs.)
Matrix Algebra, Solution of system of linear equations (Gauss Elimination), Rank and Inverse
of matrices (Gauss-Jordan), Examples of Vector Spaces.
Module-2 (8 hrs.)
Eigen values and eigen vectors, Symmetric and skew-symmetric matrices, Orthogonal
matrices, Complex matrices, Hermitian and skew matrices, Unitary matrices and similarity of
matrices, Diagonalisation of Matrices
Module-3 (9hrs.)
Vector differential calculus: vector and scalar functions and fields, Derivatives, Curves,
tangents and arc Length, gradient, divergence, curl
Vector integral calculus: Line Integrals, Green Theorem, Surfaceintegrals, Gauss theorem
and Stokes Theorem (Without Proof)
Fourier series, Fourier expansion of functions of any period, Even and odd functions, Half
range Expansion, Fourier transform and Fourier Integral.
OUTCOMES
Apply the knowledge of matrix algebra for solving system of linearequations and
compute the inverse of matrices.
To develop the essential tool of matrices to compute eigen values and eigen vectors
required for matrix diagonalization process.
Illustrate the concept of vector differential calculus to understand the solenoidal and
irrotational vectors
Illustrate the concept of vector integral calculus and exhibit the inter dependence of line,
surface and volume integrals.
Know the use of periodic functions and Fourier series, Fourier intergral, Fourier
transform to analyze circuit and system communication.
23
Text Book:
References:
24
REM2B001 ENGINEERING MECHANICS 3-0-0
Module II (8 Hours)
Center of parallel forces in a plane and center of gravity- centroids of composite plane figure
and curves, Distributed parallel forces in a plane.
General case of forces in a plane- composition of forces in a plane and equilibrium of forces
in a plane.
Moments of Inertia- Plane figure with respect to an axis in its plane and perpendicular to the
plane- parallel axis theorem, Moment of Inertia of material bodies.
Plane trusses- method of joints and method of sections, Principle of virtual work –equilibrium
of ideal systems.
Text Book:
1. Engineering Mechanics by S Timoshenko, D.H Young and J.V.Rao, McGraw Hill.
Reference Books:
i. Vector Mechanics for Engineers Statics /Dynamics by Beer, Johnston, McGraw Hill
ii. Fundamental of Engineering Mechanics by S. Rajesekharan & G. Sankara
Subramanium, Vikash Publishing House Pvt. Ltd.
iii. Engineering Mechanics by Shames and Rao, Pearson Education.
iv. Engineering Mechanics, Statics and Dynamics by Boresi and Schmidt, Thomson.
v. Engineering Mechanics by K.L. Kumar, Tata McGraw Hill.
25
RPL2B001 PROGRAMMING FOR PROBLEM SOLVING USING C
Course Outcomes
The student will learn
To formulate simple algorithms for arithmetic and logical problems.
To translate the algorithms to programs (in C language).
To test and execute the programs and correct syntax and logical errors.
Contact hrs : 40
Detailed contents
Unit 1:
Introduction to Programming (4 lectures)
Unit 2:
Arithmetic expressions, operators and precedence (2 lectures)
Unit 3:
Function (5 lectures)
Functions (including using built in libraries), Parameter passing in functions, call by value,
Passing arrays to functions: idea of call by reference
Recursion (4 lectures)
Recursion as a different way of solving problems. Example programs, such as Finding
Factorial, Fibonacci series, Ackerman function etc. Quick sort or Merge sort.
26
Unit 4:
Pointers (2 lectures)
Idea of pointers, Defining pointers, Use of Pointers in self-referential structures, notion of
linked list (no implementation). Dynamic memory allocation.
Structure (4 lectures)
Structures, Defining structures and Array of Structures, Structure vs Union.
File handling: ASCII and binary Files (1 lecture)
Unit 5:
Basic Algorithms (6 lectures)
Searching (Linear and Binary), Basic Sorting Algorithms (Bubble, Insertion, and Selection),
Concepts of time and space complexity.
27
RPL2B201 Programming for Problem Solving using C (Laboratory)
28
Distribution of Credit Semester wise:
Semester Credit
First 18
Second 23
Third 22
Fourth 21
Fifth 22
Sixth 22
Seventh 17
Eighth 15
-------------------------------------
Total 160
Pass mark will be 50% which means students have to score 50 out of 100.
Evaluation Scheme
Attendance & Daily Performance -20
Lab Record - 20
Lab Quiz - 10
Final Experiments & Viva – 50
---------------------------------------------------------
Total=100
29
All Lab examinations are to be completed one week before the end semester
examination and marks are to be displayed on the college notice board.
Students are to be shown their copies and marks within 15 days of any Internal
Examination. For each internal examination secured marks are to be displayed
in the college notice board.
Highest mark secured must be displayed with name.
Every month the attendance must be displayed with name.
At least three student feedbacks are to be collected. (After one month of
teaching, after Class Test-II and after completion of course and before end
semester examination.)
Remedial classes if conducted must be shown as the part of the Time table and
attendance record to be maintained.
30
Question Format
Registration no: -
31
Q4 (16)
Q5 (16)
Q6 (16)
32