CD54HC32, CD74HC32, CD54HCT32, CD74HCT32: Features Description
CD54HC32, CD74HC32, CD54HCT32, CD74HCT32: Features Description
CD54HC32, CD74HC32, CD54HCT32, CD74HCT32: Features Description
CD54HCT32, CD74HCT32
Data sheet acquired from Harris Semiconductor
SCHS274C
High-Speed CMOS Logic
September 1997 - Revised September 2003 Quad 2-Input OR Gate
Features Description
• Typical Propagation Delay: 7ns at VCC = 5V, The ’HC32 and ’HCT32 contain four 2-input OR gates in one
CL = 15pF, TA = 25oC package. Logic gates utilize silicon gate CMOS technology
[ /Title to achieve operating speeds similar to LSTTL gates with the
• Fanout (Over Temperature Range)
(CD54 low power consumption of standard CMOS integrated cir-
- Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads cuits. All devices have the ability to drive 10 LSTTL loads.
HCT32
- Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads The HCT logic family is functionally pin compatible with the
, standard LS logic family.
CD74 • Wide Operating Temperature Range . . . -55oC to 125oC
HC32, • Balanced Propagation Delay and Transition Times Ordering Information
CD74 • Significant Power Reduction Compared to LSTTL
TEMP. RANGE
HCT32 Logic ICs PART NUMBER (oC) PACKAGE
) • HC Types
CD54HC32F3A -55 to 125 14 Ld CERDIP
/Sub- - 2V to 6V Operation
ject - High Noise Immunity: NIL = 30%, NIH = 30% of VCC CD54HCT32F3A -55 to 125 14 Ld CERDIP
NOTE: When ordering, use the entire part number. The suffix 96
denotes tape and reel. The suffix T denotes a small-quantity reel
of 250.
Pinout
CD54HC32, CD54HCT32
(CERDIP)
CD74HC32, CD74HCT32
(PDIP, SOIC)
TOP VIEW
1A 1 14 VCC
1B 2 13 4B
1Y 3 12 4A
2A 4 11 4Y
2B 5 10 3B
2Y 6 9 3A
GND 7 8 3Y
CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures.
Copyright © 2003, Texas Instruments Incorporated.
1
CD54HC32, CD74HC32, CD54HCT, CD74HCT32
Functional Diagram
1 14
1A VCC
2 13
1B 4B
3 12
1Y 4A
4 11
2A 4Y
5 10
2B 3B
6 9
2Y 3A
7 8
GND 3Y
TRUTH TABLE
INPUTS OUTPUT
nA nB nY
L L L
L H H
H L H
H H H
nA nA
nY nY
nB nB
2
CD54HC32, CD74HC32, CD54HCT, CD74HCT32
Operating Conditions
Temperature Range (TA) . . . . . . . . . . . . . . . . . . . . . -55oC to 125oC
Supply Voltage Range, VCC
HC Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2V to 6V
HCT Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.5V to 5.5V
DC Input or Output Voltage, VI, VO . . . . . . . . . . . . . . . . . 0V to VCC
Input Rise and Fall Time
2V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000ns (Max)
4.5V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500ns (Max)
6V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400ns (Max)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. The package thermal impedance is calculated in accordance with JESD 51-7.
DC Electrical Specifications
TEST
CONDITIONS 25oC -40oC TO 85oC -55oC TO 125oC
PARAMETER SYMBOL VI (V) IO (mA) VCC (V) MIN TYP MAX MIN MAX MIN MAX UNITS
HC TYPES
High Level Input VIH - - 2 1.5 - - 1.5 - 1.5 - V
Voltage
4.5 3.15 - - 3.15 - 3.15 - V
6 4.2 - - 4.2 - 4.2 - V
Low Level Input VIL - - 2 - - 0.5 - 0.5 - 0.5 V
Voltage
4.5 - - 1.35 - 1.35 - 1.35 V
6 - - 1.8 - 1.8 - 1.8 V
High Level Output VOH VIH or -0.02 2 1.9 - - 1.9 - 1.9 - V
Voltage VIL
-0.02 4.5 4.4 - - 4.4 - 4.4 - V
CMOS Loads
-0.02 6 5.9 - - 5.9 - 5.9 - V
High Level Output -4 4.5 3.98 - - 3.84 - 3.7 - V
Voltage
-5.2 6 5.48 - - 5.34 - 5.2 - V
TTL Loads
Low Level Output VOL VIH or 0.02 2 - - 0.1 - 0.1 - 0.1 V
Voltage VIL
0.02 4.5 - - 0.1 - 0.1 - 0.1 V
CMOS Loads
0.02 6 - - 0.1 - 0.1 - 0.1 V
Low Level Output 4 4.5 - - 0.26 - 0.33 - 0.4 V
Voltage
5.2 6 - - 0.26 - 0.33 - 0.4 V
TTL Loads
Input Leakage II VCC or - 6 - - ±0.1 - ±1 - ±1 µA
Current GND
Quiescent Device ICC VCC or 0 6 - - 2 - 20 - 40 µA
Current GND
3
CD54HC32, CD74HC32, CD54HCT32, CD74HCT32
TEST
CONDITIONS 25oC -40oC TO 85oC -55oC TO 125oC
PARAMETER SYMBOL VI (V) IO (mA) VCC (V) MIN TYP MAX MIN MAX MIN MAX UNITS
HCT TYPES
High Level Input VIH - - 4.5 to 2 - - 2 - 2 - V
Voltage 5.5
Low Level Input VIL - - 4.5 to - - 0.8 - 0.8 - 0.8 V
Voltage 5.5
High Level Output VOH VIH or -0.02 4.5 4.4 - - 4.4 - 4.4 - V
Voltage VIL
CMOS Loads
High Level Output -4 4.5 3.98 - - 3.84 - 3.7 - V
Voltage
TTL Loads
Low Level Output VOL VIH or -0.02 4.5 - - 0.1 - 0.1 - 0.1 V
Voltage VIL
CMOS Loads
Low Level Output 4 4.5 - - 0.26 - 0.33 - 0.4 V
Voltage
TTL Loads
Input Leakage II VCC - 5.5 - ±0.1 - ±1 - ±1 µA
Current and
GND
Quiescent Device ICC VCC or 0 5.5 - - 2 - 20 - 40 µA
Current GND
Additional Quiescent ∆ICC VCC - 4.5 to - 100 360 - 450 - 490 µA
Device Current Per (Note 2) -2.1 5.5
Input Pin: 1 Unit Load
NOTE:
2. For dual-supply systems theoretical worst case (VI = 2.4V, VCC = 5.5V) specification is 1.8mA.
All 1.5
NOTE: Unit Load is ∆ICC limit specified in DC Electrical
Specifications table, e.g., 360µA max at 25oC.
4
CD54HC32, CD74HC32, CD54HCT, CD74HCT32
90% 90%
50%
INVERTING INVERTING 1.3V
10% 10%
OUTPUT OUTPUT
tPHL tPLH tPHL tPLH
FIGURE 1. HC AND HCU TRANSITION TIMES AND PROPAGA- FIGURE 2. HCT TRANSITION TIMES AND PROPAGATION
TION DELAY TIMES, COMBINATION LOGIC DELAY TIMES, COMBINATION LOGIC
5
PACKAGE OPTION ADDENDUM
www.ti.com 24-Aug-2018
PACKAGING INFORMATION
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) (6) (3) (4/5)
5962-8685201CA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8685201CA
CD54HCT32F3A
CD54HC32F3A ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 8404501CA
CD54HC32F3A
CD54HCT32F ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 CD54HCT32F
CD54HCT32F3A ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8685201CA
CD54HCT32F3A
CD74HC32E ACTIVE PDIP N 14 25 Green (RoHS CU NIPDAU N / A for Pkg Type -55 to 125 CD74HC32E
& no Sb/Br)
CD74HC32EE4 ACTIVE PDIP N 14 25 Green (RoHS CU NIPDAU N / A for Pkg Type -55 to 125 CD74HC32E
& no Sb/Br)
CD74HC32M ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -55 to 125 HC32M
& no Sb/Br)
CD74HC32M96 ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -55 to 125 HC32M
& no Sb/Br)
CD74HC32MG4 ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -55 to 125 HC32M
& no Sb/Br)
CD74HC32MT ACTIVE SOIC D 14 250 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -55 to 125 HC32M
& no Sb/Br)
CD74HC32MTG4 ACTIVE SOIC D 14 250 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -55 to 125 HC32M
& no Sb/Br)
CD74HCT32E ACTIVE PDIP N 14 25 Green (RoHS CU NIPDAU N / A for Pkg Type -55 to 125 CD74HCT32E
& no Sb/Br)
CD74HCT32EE4 ACTIVE PDIP N 14 25 Green (RoHS CU NIPDAU N / A for Pkg Type -55 to 125 CD74HCT32E
& no Sb/Br)
CD74HCT32M ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -55 to 125 HCT32M
& no Sb/Br)
CD74HCT32M96 ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -55 to 125 HCT32M
& no Sb/Br)
CD74HCT32ME4 ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -55 to 125 HCT32M
& no Sb/Br)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com 24-Aug-2018
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com 24-Aug-2018
Addendum-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com 8-Nov-2018
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com 8-Nov-2018
Pack Materials-Page 2
PACKAGE OUTLINE
J0014A SCALE 0.900
CDIP - 5.08 mm max height
CERAMIC DUAL IN LINE PACKAGE
1
14
12X .100
[2.54] 14X .014-.026
14X .045-.065 [0.36-0.66]
[1.15-1.65]
.010 [0.25] C A B
.754-.785
[19.15-19.94]
7 8
C SEATING PLANE
.308-.314
[7.83-7.97]
AT GAGE PLANE
4214771/A 05/2017
NOTES:
1. All controlling linear dimensions are in inches. Dimensions in brackets are in millimeters. Any dimension in brackets or parenthesis are for
reference only. Dimensioning and tolerancing per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. This package is hermitically sealed with a ceramic lid using glass frit.
4. Index point is provided on cap for terminal identification only and on press ceramic glass frit seal only.
5. Falls within MIL-STD-1835 and GDIP1-T14.
www.ti.com
EXAMPLE BOARD LAYOUT
J0014A CDIP - 5.08 mm max height
CERAMIC DUAL IN LINE PACKAGE
(.300 ) TYP
[7.62] SEE DETAIL B
SEE DETAIL A
1 14
12X (.100 )
[2.54]
SYMM
14X ( .039)
[1]
7 8
SYMM
METAL
4214771/A 05/2017
www.ti.com
IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD
PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable
standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you
permission to use these resources only for development of an application that uses the TI products described in the resource. Other
reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third
party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims,
damages, costs, losses, and liabilities arising out of your use of these resources.
TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on
ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable
warranties or warranty disclaimers for TI products.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2018, Texas Instruments Incorporated