Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

MT1H, T2H Temperature Switch

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Temperature Switch Products

MT1H, T2H Temperature Switch


Remote Bulb and Capillary Temperature Switch
Series MT1H, T2H * Reliable & Accurate

* Ambient Compensated

* NEMA 4 & IP 65

* UL, CSA & CE Approved

T2H

MT1H

Barksdale’s MT1H & T2H Series Temperature Switches provide unmatched performance, quality
& reliability in a mechanical thermostat. The single set point MT1H and dual set point T2H, can

switch, measure & control temperatures from -50° to 600°F (-45° to 316°C), The optional adjustable

differential provides precise control while ambient compensation maintains 1/2% accuracy with external

temperatures from -65° to 165°F. The MT1H & T2H Series are electrically rated for 10 amps @ 125/250

VAC & 3 amps @ 480 VAC. Standard 3- & 6-pin terminal strips simplify installation. The MT1H & T2H Series are rated

NEMA 4 & 13; the optional NEMA 4X construction protects the rugged die-cast aluminum enclosure from corrosive

environments. A remote bulb and capillary sensor is available in copper or stainless steel allowing the switch to be

mounted up to 25 feet from the temperature source. Optional thermowells allow the sensor to work in pressurized ves-

sels to 5000 psi. UL listed & CSA approved, MT1H & T2H Series Temperature Switches are perfect for your tempera-

ture sensing needs

Exceeding Your Expectations Through Our People, Products and Performance


Temperature Switch Products

MT1H, T2H Temperature Switch


When Temperature Matters, Call Barksdale
For many years, Barksdale temperature switch-
es have been switching, measuring and control-
ling critical processes throughout the world.

Protect Your Equipment with Barksdale


Barksdale temperature switches prevent damage
to heavy industrial equipment by monitoring the
temperature of engine fluids and protecting
against thermal overloads. Hydraulic power units
are protected by controlling the temperature of
fluids in systems in reservoirs.

In cold climates, Barksdale temperature switches


control heating devices that prevent pipes,
valves and fittings from freezing preventing
expensive loss and downtime. Barksdale ther-
mostats also control the temperature in process
piping to maintain the proper flow of media. Need Something Special?
If you have special product requirements, we can
Barksdale temperature switches can
help. Barksdale specializes in custom design
be used in a variety of applications:
solutions to meet your needs. We have design
• Hydraulic Power Units
engineers and technical specialists who are
• Combustion Engines
experts in solving your unique temperature prob-
• Tanks and Reservoirs
lems. Our technology and resources are at your
• Gearboxes
disposal.
• Pumps
• Compressors Need More Information?
• Machine Tools and Industrial Equipment We are only a phone call away.
• Farm & Construction Machinery Toll-Free: 1-800-835-1060.
• Process Equipment

2
Temperature Switch Products

MT1H, T2H Temperature Switch


General Description
MT1H
Electrical Characteristics All models incorporate Underwriters’
Laboratories, Inc. and CSA listed single
pole double throw snap-action switching
elements. Switches may be wired normally
open or normally closed.
Electrical Ratings AC value at 75% Power Factor —10 amps
125, 250 volts AC, 3 amps 480 volts AC.
Automatically reset by snap-action of
switch.
Performance Characteristics
Accuracy +/- 1% of mid - 60% of full range. At
constant ambient +/- 0.5% of full scale.
Switch One (1) SPDT or Two (2) Independent
SPDT Circuits
Adjustment Tamper Resistant External Adjustment
Bulb & Capillary 6 and 12 foot length standard. See
Operating Characteristics and Ordering
Data Chart
Physical
Weight Single: Approximate 1.5 lbs.,
Dual: Approximate 3.0 lbs.
Enclosure/Housing Watertight and Dusttight Indoor and
Outdoor (NEMA 4) Oiltight and Dusttight
Indoor (NEMA 13).
Elect. Connection Single: 3-Pin Terminal Strip T2H
Dual: 6-Pin Terminal Strip
Wetted Materials Copper or 304 Stainless Steel
Approvals/Listings Underwriters’ Laboratories, Inc. and
Canadian Standard Assoc.are listed under
Temperature indicating and regulating
equipment
UL File No. E56247, Guide No. XAPX
CSA File No. LR34555,
Guide 400-E-O. Class 4813
Environmental
Temperature Range See Operating Characteristics and
Ordering Data Chart
Wire Coding
Circuit #1 Common: - Purple
Low Circuit Normally Closed - Blue
Norrmally Open - Red
Circuit #2 Common - Brown
High Circuit Normally Closed - Orange
Normally Open - Yellow

3
Temperature Switch Products

MT1H, T2H Temperature Switch


Remote Bulb and Capillary Temperature Switch - Configurator
Series MT1H, T2H
Enclosure H Hermetically Sealed Limit Switch; Class I Div 2, Hazardous Location
M Single only
Blank if Dual
Sensor T Remote Bulb
Switch 1 Single SPDT
2 Dual Switch 2 Independent SPDT
Enclosure H NEMA and IP 65
Limit Switch -H 10 Amps @ 125, 250 VAC, 3 Amps @ 480 VAC; Standard
-B 10 Amps @ 125, 250, 480 VAC, 2 Amps @ 600 VAC
-GH 1.0 Amps @ 125 VAC; Gold Contact
-G 10 Amps @ 125, 250, 480 VAC, 2.0 Amps @ 600; VAC Manual Reset
-L 22 Amps @ 125, 250, 480 VAC
-M 10 Amps @ 125, 250, VAC; 3 Amps @ 480 VAC; 0.5 Amps @ 125 VDC; .025 Amps @ 250 VDC
-S 10 Amps @ 125, 250, 480 VAC; Adjustable Differential
-AA 4 Amps @ 125, 250 VAC; Hermetically Sealed
-HH 5 Amps @ 125, 250 VAC; Hermetically Sealed
-CC 10 Amps @ 125, 250 VAC; Hermetically Sealed
-GH 1 Amps @ 125 VAC; Gold Hermetically Sealed
Range XXX See Chart - Select Range Number
Wetted Material Blank = 6 foot Copper Sensor
S 6 foot 304 Stainless Steel Sensor
-12 12 foot Copper
-12 12 foot Stainless Steel
-25 25 foot Stainless Steel with Armor
Options Blank if not required
-A 302 Stainless Steel Armor (Standard)
Thermowell -RD Manual Reset (Must use when selecting “G” Limit Switch options)
FX NEMA 4X

M T 1 H -G 251 S -12 -A -RD -FX


Example: MT1H-G251S-12-A-RD-FX

NOTE: When selecting the manual reset option on


dual setting switches (T2H), the manual reset limit Operating Characteristics
switch will be on the high circuit. The low circuit Range Adjustable Range Media Temperature Limit Differential
(Proof) (Approx.) Liquid
limit switch must be specified by the customer. °F °C °F °C Calibrated Dial
°F °C
Low High Low High Low High Low High Adjustment
154 -50 +150 -45 +66 -100 +200 -73 +93 1 to 2 .5 to 1.1 Calibrated
251 +50 +250 +10 +121 -100 +300 -73 +149 1 to 2 .5 to 1.1 5° Subdivision
351 +150 +350 +66 +177 -100 +400 -73 +205 1 to 2 .5 to 1.1 200° Span
601 +300 +440 +149 +227 0 +650 -18 +343 2 to 4 1.1 to 2.2 5° Subdivision
140° Span
NOTE: Changing limit switch will effect dead band; 603 +320 +600 +160 +316 0 +650 -18 +343 2 to 4 1.1 to 2.2 10° Subdivision
See sales drawing 280° Span

3211 Fruitland Avenue • Los Angeles, CA 90058 •  800-835-1060 • Fax: 323-589-3463 • www.barksdale.com
See Barksdale’s Standard Conditions of Sale • Specifications are subject to modification at any time • Bulletin #T0021-D • 05/05 • ©2005 • Printed in the U.S.A.
4

You might also like